TY - RPRT A1 - Rank, Daniel A1 - Heberl, Michael A1 - Sterner, Michael T1 - Die CO2-Bilanz der OTH [Ostbayerischen Technische Hochschule Regenburg] BT - Tool für Hochschulen und Firmen Y1 - 2020 UR - https://sae58cb7e2208a3d2.jimcontent.com/download/version/1613400473/module/9240277976/name/1. Sitzung AG_Präsentation Prof. Sterner-1.pdf ER - TY - CHAP A1 - Rill, Daniel A1 - Butz, Christiane A1 - Rill, Georg ED - Kecskeméthy, Andrés ED - Geu Flores, Francisco T1 - Dynamic Interaction of Heavy Duty Vehicles and Expansion Joints T2 - Multibody Dynamics 2019, Proceedings of the 9th ECCOMAS Thematic Conference on Multibody Dynamics N2 - The “Smart Bridge (Intelligente Brücke)” project cluster, initiated by the German Federal Highway Research Institute (Bundesanstalt für Straßenwesen, BASt) and the Federal Ministry of Transport and Digital Infrastructure (BMVI), focuses on “smart” monitoring devices that allow an efficient and economic maintenance management of bridge infrastructures. Among the participating projects, the one presented herein focuses on the development of a smart expansion joint, to assess the traffic parameters on site. This is achieved by measuring velocity and weight of crossing vehicles. In reference measurements, performed with a three-axle truck and a typical tractor semi-trailer combination with five axles in total, it was shown that the interaction between the vehicle and the expansion joint is highly dynamic and depends on several factors. To get more insight into this dynamic problem, a virtual test rig was set up. Although nearly all vehicle parameters had to be estimated, the simulation results conform very well with the measurements and are robust to vehicle parameter variations. In addition, they indicate a significant influence of the expansion joint dynamic to the peak values of the measured wheel loads, in particular on higher driving velocities. By compensating the relevant dynamic effects in the measurements, a “smart” data processing algorithm makes it possible to determine the actual vehicle weights in random traffic with reliability and appropriate accuracy. Y1 - 2020 SN - 978-3-030-23131-6 U6 - https://doi.org/10.1007/978-3-030-23132-3_56 VL - 53 SP - 471 EP - 478 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Rill, Georg A1 - Arrieta Castro, Abel ED - Klomp, Matthijs ED - Bruzelius, Fredrik ED - Nielsen, Jens ED - Hillemyr, Angela T1 - A Novel Approach for Parametrization of Suspension Kinematics T2 - Advances in Dynamics of Vehicles on Roads and Tracks: Proceedings of the 26th Symposium of the International Association of Vehicle System Dynamics (IAVSD 2019), August 12-16, 2019, Gothenburg, Sweden N2 - n the automotive industry, simulations are needed to analyse the dynamics of vehicles and also of its main components and subsystems, e.g. tires, brakes and suspension systems. These simulations are required for an early-stage development and in consequence, they must deliver realistic results. Suspension systems plays a key role in comfort and safety of road vehicles. They usually consist of rigid links and force elements that are arranged with a specific topology. In addition, some of their functionalities are to carry the weight of the car and the passengers, and maintain a correct wheel alignment. In simulations involving suspension systems, lookup-tables are frequently used. They are obtained from a Kinematic and Compliance (KnC) test and then standardized for a specific vehicle simulation software. Nonetheless, lookup-tables require a reasonable number of characteristic points. Additionally, derivatives, interpolation, and extrapolation are not necessarily smooth. This produces results that depend on the interpolation technique and may be inaccurate. In this paper, a novel method called “design kinematics” is proposed. This method can describe the kinematic properties of almost any type of suspension systems. Comparisons with an analytic calculation and a KnC measurement shown that the design kinematics is able to represent the kinematic and compliance properties of suspension systems extremely well and very efficiently. KW - design Kinematics KW - Kinematic and compliance test KW - Suspension systems Y1 - 2020 SN - 978-3-030-38076-2 U6 - https://doi.org/10.1007/978-3-030-38077-9_210 SP - 1848 EP - 1857 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Rill, Georg T1 - TMeasy 6.0-A handling tire model that incorporates the first two belt eigenmodes T2 - Proceedings of the XI International Conference on Structural Dynamics (EURODYN 2020): Athens, Greece, 23.11.2020 - 26.11.2020 N2 - TMeasy 6.0, an extension to the standard TMeasy tire model of version 5.3, takes the relevant first two rigid body eigenmodes of the belt into consideration. These modes represent the in plane longitudinal and rotational movements of the belt relative to the rim. The dynamics of the longitudinal force is of higher order then and reproduces the tire wheel vibrations, required for indirect tire-pressure monitoring systems (iTPMS), sufficiently well. A tailored implicit solver, which takes the stiff coupling between the longitudinal force and the belt motions into account, still provides real-time performance in addition. Simulation examples show that a rigid body vehicle model equipped with TMeasy 6.0 makes it possible to investigate second generation indirect tire-pressure monitoring systems. KW - TMeasy Tire Model KW - Tire Force Dynamics KW - Frequency Analysis KW - Real-time Simulation KW - Virtual Test Rig Y1 - 2020 U6 - https://doi.org/10.47964/1120.9054.18673 SP - 676 EP - 689 PB - EASD Procedia ER - TY - BOOK A1 - Rill, Georg A1 - Arrieta Castro, Abel T1 - Road Vehicle Dynamics N2 - Road Vehicle Dynamics: Fundamentals and Modeling with MATLAB®, Second Edition combines coverage of vehicle dynamics concepts with MATLAB v9.4 programming routines and results, along with examples and numerous chapter exercises. Improved and updated, the revised text offers new coverage of active safety systems, rear wheel steering, race car suspension systems, airsprings, four-wheel drive, mechatronics, and other topics. Based on the lead author's extensive lectures, classes, and research activities, this unique text provides readers with insights into the computer-based modeling of automobiles and other ground vehicles. Instructor resources, including problem solutions, are available from the publisher. KW - Fahrdynamik Y1 - 2020 SN - 9780429244476 U6 - https://doi.org/10.1201/9780429244476 PB - CRC Press CY - Boca Raton, Fla. ER - TY - CHAP A1 - Ketterl, Hermann A1 - Heinrich, Tobias A1 - Reitmeier, Torsten A1 - Hoelscher, Clemens ED - Jäkel, Jens ED - Thiel, Robert T1 - Emissionsabhängige Leistungsregelung für BHKW’s T2 - Tagungsband AALE 2020: Automatisierung und Mensch-Technik-Interaktion, 17. Fachkonferenz, 4. bis 6. März 2020, Leipzig Y1 - 2020 SN - 978-3-8007-5180-8 VL - 2020 PB - VDE-Verlag ER - TY - JOUR A1 - Bruni, S. A1 - Meijaard, J. P. A1 - Rill, Georg A1 - Schwab, A. L. T1 - State-of-the-art and challenges of railway and road vehicle dynamics with multibody dynamics approaches JF - Multibody System Dynamics N2 - A review of the current use of multibody dynamics methods in the analysis of the dynamics of vehicles is given. Railway vehicle dynamics as well as road vehicle dynamics are considered, where for the latter the dynamics of cars and trucks and the dynamics of single-track vehicles, in particular motorcycles and bicycles, are reviewed. Commonalities and differences are shown, and open questions and challenges are given as directions for further research in this field. KW - AUTOMATIC-GENERATION KW - BICYCLE DYNAMICS KW - Bicycles KW - CREEP FORCES KW - FREIGHT WAGON KW - LATERAL DYNAMICS KW - LINEAR-MODEL KW - Motorcycles KW - NON-HERTZIAN KW - PASSIVE RIDER KW - Railway vehicles KW - Review KW - Road vehicles KW - ROLLING-CONTACT KW - vehicle dynamics KW - WHEELSET-TRACK INTERACTION Y1 - 2020 U6 - https://doi.org/10.1007/s11044-020-09735-z VL - 49 IS - 1 SP - 1 EP - 32 PB - Springer ER - TY - JOUR A1 - Sterner, Michael A1 - Bauer, Franz T1 - Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland JF - Chemie-Ingenieur-Technik N2 - Um den Einfluss verschiedener Power-to-X-Verfahren auf die Transformation des deutschen Energiesystems und das Erreichen der Klimaschutzziele zu überprüfen, wurde ein sektorübergreifendes Energiesystemmodel entwickelt. Die daraus gewonnenen Ergebnisse zeigen: Für eine erfolgreiche Energiewende ist der Einsatz von Power-to-X in Zukunft unverzichtbar. Vor allem in Bereichen und Sektoren, in denen hohe Energiedichten erforderlich und nur wenig andere Optionen zur Defossilisierung vorhanden sind, werden Power-to-X-Technologien zwingend notwendig. T2 - Power-to-X in Context of Energy Transition and Climate Change Mitigation in Germany KW - Power-to-Gas KW - Climate mitigation KW - Energy system KW - Modeling KW - Power-to-X KW - Klimaschutz KW - Energiewende Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-11669 SN - 0009-286X N1 - Corresponding author: Franz Bauer VL - 92 IS - 1-2 SP - 85 EP - 90 PB - Wiley ER - TY - JOUR A1 - Mikhaeil, Makram A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - On the development of an innovative adsorber plate heat exchanger for adsorption heat transformation processes; an experimental and numerical study JF - Energy N2 - An innovative adsorber plate heat exchanger (APHE), which is developed for application in adsorption heat pumps, chillers and thermal energy storage systems, is introduced. A test frame has been constructed as a representative segment of the introduced APHE for applying loose grains of AQSOA-Z02. Adsorption kinetic measurements have been carried out in a volumetric large-temperature-jump setup under typical operating conditions of adsorption processes. A transient 2-D model is developed for the tested sample inside the setup. The measured temporal uptake variations with time have been fed to the model, through which a micro-pore diffusion coefficient at infinite temperature of 2 E−4 [m2s−1] and an activation energy of 42.1 [kJ mol−1] have been estimated. A 3-D model is developed to simulate the combined heat and mass transfer inside the APHE and implemented in a commercial software. Comparing the obtained results with the literature values for an extruded aluminium adsorber heat exchanger coated with a 500 μm layer of the same adsorbent, the differential water uptake obtained after 300 s of adsorption (8.2 g/100 g) implies a sound enhancement of 310%. This result proves the great potential of the introduced APHE to remarkably enhance the performance of adsorption heat transformation appliances. KW - Adsorber heat exchanger KW - Plate heat exchanger KW - Adsorption kinetics KW - Dynamic simulation Y1 - 2020 U6 - https://doi.org/10.1016/j.energy.2020.118272 N1 - Corresponding author: Belal Dawoud VL - 207 IS - September SP - 1 EP - 13 PB - Elsevier ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Striegl, Birgit A1 - Prem, Nina A1 - Sindersberger, Dirk T1 - Electrical Properties of Magnetoactive Boron‐Organo‐Silicon Oxide Polymers JF - Macromolecular Chemistry and Physics N2 - The electrical properties of rheopectic magnetoactive composites comprising boron-organo-silicon oxide dielectric matrices containing carbonyl iron microparticles are presented for the first time. The increase in interfacial magnetocapacitance is seen to greatly exceed that experienced when using conventional elastomeric matrices such as polydimethylsiloxane. In addition to the increase in capacitance, a simultaneous and sharp decrease in the parallel electrical resistance over several orders of magnitude is also observed. The effects are time dependent but repeatable. Potential applications include magnetically controlled frequency dependent devices, magnetic sensor systems, weighting elements for neural networks, etc. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26488 N1 - Corresponding author: Gareth J. Monkman VL - 221 IS - 4 SP - 1 EP - 8 PB - Wiley ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. T1 - Infrared spectral analysis of low concentration magnetoactive polymers JF - Journal of Applied Polymer Science N2 - This work concerns an area of magnetoactive polymer (MAP) research seldom considered. Traditionally only MAP with high concentrations of magnetic filler (typically between 10 and 90 wt%) have been investigated. This article deals with a hitherto neglected aspect of research, namely MAP containing lower magnetic filler concentrations (1 to 3 wt%). This article utilizes a range of spectroscopic analysis methods (Raman and FTIR) and their applicability to MAP characterization at wavelengths ranging from 2.5 to 25 mu m. Particular attention is paid to low carbonyl iron particle (CIP) concentrations in MAP for which the emergence of capillary doublets at a critical 2 wt% concentration is revealed. This results in measurable magnetic field-dependent changes in IR absorption at a wavelength of 4.255 mu m together with a detectable CO2 susceptibility. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48366. KW - ELASTOMERS KW - magnetism and magnetic properties KW - sensors and actuators KW - spectroscopy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-25913 SN - 1097-4628 N1 - Corresponding author: Nina Prem VL - 137 IS - 7 SP - 1 EP - 7 PB - Wiley ER - TY - JOUR A1 - Metsch, P. A1 - Schmidt, H. A1 - Sindersberger, Dirk A1 - Kalina, K. A. A1 - Brummund, J. A1 - Auernhammer, Günter A1 - Monkman, Gareth J. A1 - Kästner, Markus T1 - Field-Induced Interactions in Magneto-Active Elastomers BT - A Comparison of Experiments and Simulations JF - Smart Materials and Structures N2 - In this contribution, field-induced interactions of magnetizable particles embedded into a soft elastomer matrix are analyzed with regard to the resulting mechanical deformations. By comparing experiments for two-, three- and four-particle systems with the results of finite element simulations, a fully coupled continuum model for magneto-active elastomers is validated with the help of real data for the first time. The model under consideration permits the investigation of magneto-active elastomers with arbitrary particle distances, shapes and volume fractions as well as magnetic and mechanical properties of the individual constituents. It thus represents a basis for future studies on more complex, realistic systems. Our results show a very good agreement between experiments and numerical simulations—the deformation behavior of all systems is captured by the model qualitatively as well as quantitatively. Within a sensitivity analysis, the influence of the initial particle positions on the systems' response is examined. Furthermore, a comparison of the full three-dimensional model with the often used, simplified two-dimensional approach shows the typical overestimation of resulting interactions in magneto-active elastomers. Y1 - 2020 U6 - https://doi.org/10.1088/1361-665X/ab92dc N1 - Corrigendum: Field-induced interactions in magneto-active elastomers—a comparison of experiments and simulations (2020 Smart Mater. Struct. 29 085026); https://doi.org/10.1088/1361-665X/abb98b VL - 29 IS - 8 SP - 1 EP - 10 PB - IOPscience ER - TY - CHAP A1 - Frauenschläger, Tobias A1 - Dentgen, Manuel A1 - Mottok, Jürgen T1 - Systemarchitektur eines Sicherheitsmoduls im Energiesektor T2 - Tagungsband 2. Symposium Elektronik und Systemintegration ESI 2020: "Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung" N2 - Aufgrund der immer weiter anwachsenden Vernetzung der Stromnetze wird die Kommunikation zwischen der Leitstelle des Energieversorgers und den Infrastrukturkomponenten innerhalb eines Umspannwerks immer bedeutsamer. Dabei werden sowohl Steuerbefehle als auch Daten für Überwachungsfunktionen übertragen. In den aktuellen Netzwerkarchitekturen findet diese Kommunikation ohne eine kryptografische Absicherung statt, was einen Angriffspunkt für gezielte Attacken und damit eine potenzielle Gefährdung der Energieversorgung darstellt. Um solchen Angriffen in Zukunft entgegenzuwirken, wird das ES³M-Sicherheitsmodul entwickelt. Dieses soll in das Netzwerk zwischen den beiden Kommunikationspartnern eingesetzt werden und so den Datenverkehr absichern. Mithilfe einer Bedrohungsanalyse wurden Anforderungen abgeleitet, die neben kryptografischen Maßnahmen auch Themen wie funktionale Sicherheit und Langlebigkeit umfassen. Um diese zu erfüllen, wurde eine spezielle Systemarchitektur auf Basis einer Aufgabenteilung entworfen. Diese Architektur und korrespondierende Designentscheidungen werden präsentiert. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-2092 N1 - Die Konferenzveröffentlichung erschien im Band "Fachbeiträge 2. Symposium Elektronik und Systemintegration ESI 2020" mit dem Titel „Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung“. Die Fachtagung, geplant für den 01. April 2020 an der Hochschule Landshut, wurde aufgrund der Corona-Pandemie abgesagt, die eingereichten Fachbeiträge im Band veröffentlicht. Hrsg.: Artem Ivanov, Marc Bicker und Peter Patzelt. Hochschule Landshut, 2020, ISBN 978-3-9818439-4-1 SP - 29 EP - 38 CY - Landshut ER - TY - CHAP A1 - Mühlbauer, Christian A1 - Rabl, Hans-Peter A1 - Rottengruber, Hermann T1 - Akustische Analyse und Optimierung von mechatronischen Kraftstoffeinspritzsystemen T2 - Tagungsband DAGA 2019 - 45. Jahrestagung für Akustik, 18.-21. März 2019, Rostock Y1 - 2019 UR - https://pub.dega-akustik.de/DAGA_2019/data/articles/000004.pdf SN - 978-3-939296-14-0 SP - 647 EP - 650 PB - Deutsche Gesellschaft für Akustik CY - Berlin ER - TY - CHAP A1 - Schneider, Sebastian A1 - Hots, Jan A1 - Luft, Tommy A1 - Rottengruber, Hermann A1 - Verhey, Jesko L. A1 - Rabl, Hans-Peter T1 - Entwicklung einer empirischen Formel zur Bewertung der Tickergeräuschanteile von Motorgeräuschen T2 - DAGA 2019 - 45. Jahrestagung für Akustik, 8.-21. März 2019, Rostock Y1 - 2019 UR - https://pub.dega-akustik.de/DAGA_2019/data/daga19_proceedings.pdf SN - 978-3-939296-14-0 VL - 45 SP - 643 EP - 646 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - CHAP A1 - Rieger, Anna A1 - Mühlbauer, Christian A1 - Weber, Rainer A1 - Rabl, Hans-Peter T1 - Measures to Address the Dissonance Perception of Multiple Tonal Components in Sounds T2 - DAGA 2019 - 45. Jahrestagung für Akustik, 18.-21. März 2019, Rostock Y1 - 2019 UR - https://pub.dega-akustik.de/DAGA_2019/data/articles/000499.pdf VL - 45 SP - 375 EP - 378 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - GEN A1 - Schwanzer, Peter A1 - Dietrich, Markus A1 - Gaderer, Matthias A1 - Rabl, Hans-Peter T1 - Monitoring von Partikelfiltern für den Einsatz in Fahrzeugen mit direkt- einspritzenden Ottomotoren mit einer Radio-Frequenz (RF-) Antenne T2 - Kolloquium des Bayerischen Wissenschaftsforum Y1 - 2019 UR - https://mobilitaet-verkehr.baywiss.de/fileadmin/verbundkolleg/mobilitaet-verkehr/poster/20190417_Poster_Regensburg_Kolloqium_des_Bayerischen_Wissenschaftsforum_Peter_Schwanzer.pdf ER - TY - GEN A1 - Schwanzer, Peter A1 - Dietrich, Markus A1 - Haft, Gerhard A1 - Gaderer, Matthias A1 - Rabl, Hans-Peter T1 - Oxidation Kinetics Determination of GDI Engine Soot by a Radio-Frequency Sensor T2 - 23rd Conference on Combustion Generated Nanoparticles 2019, June 17-20, Zürich, Switzerland Y1 - 2019 UR - https://www.nanoparticles.ch/archive/2019_Schwanzer_PO.pdf ER - TY - JOUR A1 - Sindersberger, Dirk A1 - Prem, Nina A1 - Monkman, Gareth J. T1 - Self-assembling structure formation in low-density magnetoactive polymers JF - Journal of Applied Polymer Science N2 - The formation of microstructures in magnetoactive polymers (MAPs) is a recently discovered phenomenon found only with very low filler particle concentrations (less than 3 wt %). Due to the degassing process, filler particles collect around an ascending bubble, which dissolves at a certain point leaving particulate rings within the matrix. The formation of toroidal microstructures commences as filler concentration approaches 1 wt %. The development of coherent parallel aligned rings with a compact order continues as particle concentrations increase toward 2 wt %. Between 2 and 3 wt % capillary doublets develop, while mass percentages higher than 3% result in increasing entropy as the random order of particle agglomeration found in higher concentration MAP dominates. Self-structured samples of different filler material and concentrations between 1 and 3 wt % have been investigated using X-ray tomography, where the emerging structures can be observed and visualized. The ring structures resulting from this research represent microinductivities which can be fabricated in a targeted manner, thus enabling new applications in the high-frequency radio field. Furthermore, these anisotropic, but well-organized, structures have magnetic field-dependent implications for optical, thermal, acoustic, and medical applications. KW - composites KW - ELASTOMERS KW - magnetism and magnetic properties KW - Particle KW - PERMEABILITY KW - self-assembly KW - sensors and actuators KW - VISCOELASTIC PROPERTIES KW - X-ray Y1 - 2019 U6 - https://doi.org/10.1002/app.48291 VL - 137 IS - 3 PB - Wiley ER - TY - CHAP A1 - Reindl, Andrea A1 - Meier, Hans A1 - Niemetz, Michael T1 - Software Framework for the Simulation of a Decentralized Battery Management System Consisting of Intelligent Battery Cells T2 - 2019 IEEE Student Conference on Research and Development (SCOReD), 15-17 Oct. 2019, Bandar Seri Iskandar, Malaysia N2 - Conventional battery management systems typically adopt hierarchical master-slave architectures. With regard to an uninterruptible power supply, the most significant disadvantage of central structures is the dependency of the errorfree function of the superior master board. The decentralized battery management system presented in this paper, consisting of consumers, generators and intelligent battery cells, is controlled without any central coordination authority. For this purpose, an intelligent control algorithm and a leader election algorithm are implemented on the microcontrollers of the battery cells. To test different control and election strategies, a software framework is presented for the complete simulation of the decentralized battery management system consisting of equal participants. KW - autonomous systems KW - Battery management system KW - decentralized control KW - distributed management KW - fault tolerant control KW - power system security KW - Renewable energy sources KW - uninterruptible power systems Y1 - 2019 U6 - https://doi.org/10.1109/SCORED.2019.8896284 SP - 75 EP - 80 ER - TY - CHAP A1 - Hopkins, Andrew A1 - Hopfensperger, Bernhard A1 - Mellor, Phil T1 - DC-link Capacitor Reduction in Low Voltage and High Power Integrated Modular Motor Drives T2 - 2019 IEEE Energy Conversion Congress and Exposition (ECCE), 29 Sept.-3 Oct. 2019, Baltimore, MD, USA N2 - The development of 48V high power (>15 kW) automotive propulsion drives demands close integration of the power electronics and the electrical machine. Due to the large operating currents distributed multi-phase topologies are needed and physically separating the power converter from the e-machine would involve heavy cabling and costly connections. The volume and cost of the filter capacitor represents a major challenge in closely integrated high power integrated modular motor drives and techniques are needed to minimize this. The DC-link capacitor requires a large ripple current handling capability and cost, size and reliability limitations result in suitable candidate technologies being those with low volumetric energy densities. Use of interleaved multi three-phase machines are attractive due to the associated capacitor ripple current reduction. Discontinuous modulation schemes may also be employed as a technique for reducing the current ripple. In this paper techniques for capacitor ripple reduction are assessed through simulation and compared. KW - Capacitors KW - carrier phase shift KW - DC-link capacitor KW - dual 3-phase inverter KW - integrated modular motor drive KW - Interleaving KW - Inverters KW - Low voltage KW - Motor drives KW - Pulse width modulation KW - ripple current reduction KW - winding displacement KW - Windings Y1 - 2019 U6 - https://doi.org/10.1109/ECCE.2019.8913213 SP - 3208 EP - 3214 ER - TY - CHAP A1 - Scharfenberg, Georg A1 - Elis, Ludek A1 - Hofmann, Gerhard T1 - New Design Methodology – Using VHDL-AMS Models to Consider Aging Effects in Automotive Mechatronic Circuits for Safety Relevant Functions T2 - 2019 International Conference on Applied Electronics (AE), 10-11 Sept. 2019, Pilsen, Czech Republic N2 - In this paper a design method for mechatronic functions in an early design phase under consideration of the requirements of functional safety is proposed [14]. The goal of the method is to discover threats for the safety goals and to prove or optimize the diagnostic mechanisms. At the current design process a lifetime endurance test is performed in a late project phase. In order to avoid unexpected late design changes the method should be applied in an early design phase. The method is an additional way to avoid design failures for E/E functions with special focus on aging in the field of functional safety applications. The method is developed out of three standards VDI 2221 methodology for development and construction of technical systems and products [1]), VDI 2206 design methodology for mechatronic systems [2] and the ISO 26262 road vehicles - Functional Safety [3] by using the V-Model. Furthermore, a core element of the design method is simulating aging effects by applying VHDL - AMS. To demonstrate the design methodology a sensor out of the EGAS function is chosen as a safety relevant automotive system. The limitation is the availability of aging data for electrical components. KW - Aging KW - Design methodology KW - Functional Safety KW - Integrated circuit modeling KW - Mechatronic design method KW - Mechatronics KW - Resistor aging KW - safety Y1 - 2019 U6 - https://doi.org/10.23919/AE.2019.8867034 SP - 1 EP - 5 ER - TY - CHAP A1 - Brkic, Jovan A1 - Ceran, Muaz A1 - Elmoghazy, Mohamed A1 - Kavlak, Ramazan A1 - Haumer, Anton A1 - Kral, Christian T1 - Open Source PhotoVoltaics Library for Systemic Investigations T2 - Proceedings of the 13th International Modelica Conference, March 4-6, 2019, Regensburg, Germany N2 - For the planning of photovoltaic power plants standard software tools are used. Most of these software tools use statistical solar data to determine the overall energy harvest of a photovoltaic plant over one year. The calculations rely on stationary location and ideal boundary conditions, e.g., constant ambient temperature. Even though, for example, shadowing may be considered by standard software, the investigation of untypical configurations and problems cannot be performed by such software, as most configurations cannot be changed by the user. The presented PhotoVoltaics library was developed with the intention to provide a flexible framework for standard and non-standard problems. Particularly, the PhotoVoltaics library can be coupled with other Modelica libraries to perform systemic investigations. An application library, PhotoVoltaics_TGM, is provided as add-on, where measured data of two photovoltaic pants of the TGM in Vienna can be compared with simulation results. This add-on library serves as validation of the PhotoVoltaics library. KW - CELL KW - converter KW - data sheet KW - irradiance KW - maximum power tracking KW - module KW - Photovoltaics KW - plant KW - terrestrial solar model Y1 - 2019 U6 - https://doi.org/10.3384/ecp1915741 SP - 41 EP - 50 PB - Linköing University Electronic Press ER - TY - CHAP A1 - Alexander, Grimm A1 - Haumer, Anton T1 - Parametrization Of A Simplified Physical Battery Model T2 - Proceedings of the 13th International Modelica Conference, March 4-6, 2019, Regensburg, Germany N2 - The importance of batteries is increasing, especially in the field of the high power requirement systems like electric driven vehicles. Mobile energy storage makes it possible to accelerate with incredible torque, without any accruing air pollution. Due to the high costs of real components, it is of great use to simulate battery driven systems before building them. Transient processes within a cell are highly dependent on the operating point of the complete system, which makes it difficult to create equations and model arameterizations. This paper shows which data is important for cell modeling and how to parameterize simplified physical cell models. KW - battery parameterization KW - physical battery model KW - simplified battery model Y1 - 2019 U6 - https://doi.org/10.3384/ecp19157215 SP - 215 EP - 220 PB - Linköing University Electronic Press ER - TY - CHAP A1 - Diamantidis, Dimitris A1 - Sýkora, Miroslav T1 - Implementing Information Gained through Structural Health Monitoring – Proposal for Standards T2 - 13th International Conference on Applications of Statistics and Probability in Civil Engineering, Mai 2019, Seoul, Korea N2 - With exception of a few issues such as design by testing, current standards do not include guidelines on the use and the quantification of value of additional information gained through Structural Health Monitoring (SHM). This contribution summarizes a recently developed draft of the guideline for practicing engineers in the framework of the EU-COST project 1402 and illustrates its application in engineering decision-making. Besides continuous and periodic monitoring, visual inspection, non-destructive evaluation and proof loading are included herein as a simple form of SHM. The guideline is independent of a type of structure, construction materials, loading, and of environmental conditions. It aims at a wide field of application including design of new structures, assessment of existing structures and type specific monitoring of a population of structures. The decision process related to the use of SHM is presented first together with relevant decision objectives and variables. Performance indicators are summarized and discussed with respect to the performance objectives. The evaluation of monitoring strategies based on life cycle costs is exposed and the selection of optimal intervention actions including safety measures is shown in representative case studies. The results demonstrate the potential of the use of monitoring to support engineering decisions and reflect though the practical benefits from the application of the guideline. Y1 - 2019 UR - https://www.researchgate.net/publication/333578633_Implementing_Information_Gained_through_Structural_Health_Monitoring_-Proposal_for_Standards ER - TY - CHAP A1 - Briem, Ulrich ED - Scholten, Jan T1 - Neue Methode zur Bestimmung der Biegesteifigkeit von Drahtseilen T2 - Der Kran - Leistungssteigerung, Leichtbau und Automatisierung : 27. Internationale Kranfachtagung 2019 : Begleitband zur Kranfachtagung am 07. März 2019 in Bochum Y1 - 2019 SN - 3-89194-226-5 SP - 103 EP - 112 PB - Selbstverlag der Ruhr-Universität Bochum CY - Bochum ER - TY - CHAP A1 - Briem, Ulrich T1 - Lebensdauerverhalten verdichteter Seildrähte T2 - Ilmenauer Drahttag 2019 Y1 - 2019 SN - 978-3- 938843-96-3 SP - 73 EP - 82 PB - ISLE Steuerungstechnik und Leistungselektronik CY - Ilmenau ER - TY - CHAP A1 - Büttner, Johannes A1 - Bohigas Boladeras, Pere A1 - Gottschalk, Philipp A1 - Kucera, Markus A1 - Waas, Thomas T1 - Performance Isolation of Co-located Workload in a Container-based Architecture for Automobile T2 - 9th International Conference on Ambient Computing, Applications, Services and Technologies 2019, 22-26.09.2019, Porto, Portugal N2 - As the development in the automotive sector is facing upcoming challenges, the demand for in-vehicle computing power capacity increases and the need for flexible hardware and software structures arises, allowing dynamic managament of resources. In this new scenario, software components are to be added, removed, updated and migrated between computing units. To isolate the software components from each other and allow its orchestration, a container-based virtualization approach is being tested throughout this research. The analysis focuses on the question if this virtualization technology could be an option to ensure an interference-free operation. Four different sample applications from the automotive environment are tested for their susceptibility to resource contention. The research on the one hand shows that CPU and memory used by an application can be largely isolated with this technology, but on the other hand, it becomes apparent that support for I/O-heavy usage is currently not implemented sufficiently for container engines. KW - container-based virtualization KW - resource management KW - resource isolation KW - stress testing Y1 - 2019 UR - https://ns2.thinkmind.org/articles/ambient_2019_2_20_40020.pdf SN - 978-1-61208-739-9 SP - 31 EP - 37 ER - TY - GEN A1 - Waas, Thomas ED - Ahmet, Yavuz Oral ED - Zehra, Banu Oral ED - Mehmet, Sezer ED - Mehmet, Emre Aköz ED - Seda, Kol ED - Onur, Alp ED - Aksan, Vala ED - Can, Aşkan ED - Gamze, Sekicek T1 - Energy Monitoring and Saving in Medium-Sized Companies T2 - 5th International Congress on Energy Efficiency & Energy Related Materials (ENEFM 2019), Gebze Technical University, Turkey, Book of Abstracts Y1 - 2019 ER - TY - JOUR A1 - Braun, Peter A1 - Rabl, Hans-Peter A1 - Matysik, Frank-Michael T1 - Investigations on the Liquid-Phase Decomposition of AdBlue Urea for the Selective Catalytic Reduction Process JF - Chemie Ingenieur Technik N2 - Difficulties in decomposing AdBlue to ammonia limit the applicability of selective catalytic reduction systems at low exhaust temperatures. Investigations on the decomposition of AdBlue in the liquid phase under elevated pressure at temperatures up to 165 degrees C were carried out. Besides effects of inorganic catalysts, the impact of pH on urea decomposition was examined. After dissolution in aqueous phase, the compounds ZnO, WO3, and MoO3 were found to be effective in liquid-phase AdBlue decomposition. However, the efficiency was dropping significantly over few hours. Decomposition of AdBlue urea was also found to be favored for alkaline and acidic conditions. KW - AdBlue urea KW - Ammonia KW - DeNO(x) KW - EMISSIONS KW - HYDROLYSIS KW - KINETICS KW - Liquid-phase decomposition KW - LOW-TEMPERATURE SCR KW - MODEL KW - NOX KW - Selective catalytic reduction Y1 - 2019 U6 - https://doi.org/10.1002/cite.201800055 VL - 91 IS - 7 SP - 961 EP - 968 PB - Wiley ER - TY - JOUR A1 - Braun, Peter A1 - Durner, Bernhard A1 - Rabl, Hans-Peter A1 - Matysik, Frank-Michael T1 - Investigations on the decomposition of AdBlue urea in the liquid phase at low temperatures by an electrochemically induced pH shift JF - Monatshefte für Chemie N2 - Ammonia-based selective catalytic reduction (SCR) systems are the most widely used technology for reduction of nitrogen oxide emissions from lean-burn engines such as diesel engines. However, at low exhaust temperatures, the SCR process is limited by difficulties in the decomposition of the ammonia precursor urea, which is carried on-board using an aqueous solution "AdBlue". In this study, the decomposition of AdBlue urea induced by electrical current and the resulting associated pH shifts were investigated in a divided cell configuration in the liquid phase. The decomposition was found to be favored in both electrochemical compartments, anodic and cathodic, at temperatures of 60-80 degrees C compared to a reference without electrochemical treatment. In addition to the determination of ammonia contents using an ammonia sensor, IC/HPLC analyses were carried out for each sample. Different side products such as biuret, nitrate, cyanuric acid, ammelide, and others were formed. In the anodic compartment, nitrate formation could be observed due to oxidation of ammonia at the electrode surface. [GRAPHICS] . KW - Ammonia KW - Catalysis KW - CONVERSION KW - Diesel Engine KW - DOPED MN/TIO2 KW - Electrochemistry KW - HYDROLYSIS KW - In situ pH shift KW - NOX KW - OXIDATION KW - PRODUCTS KW - REMOVAL KW - SCR KW - SELECTIVE CATALYTIC-REDUCTION KW - Thermochemistry Y1 - 2019 U6 - https://doi.org/10.1007/s00706-019-02406-6 VL - 150 IS - 9 SP - 1633 EP - 1641 PB - Springer ER - TY - GEN A1 - Weiss, Nils T1 - Vulnerabilities of Connected Cars and beyond T2 - Applied Research Colloquium, 2019, Università Padua, Italy Y1 - 2019 ER - TY - CHAP A1 - Sýkora, Miroslav A1 - Diamantidis, Dimitris A1 - Markova, J. A1 - Masciotta, Maria Giovanna ED - Baričević, Ana ED - Jelčić Rukavina, Marija ED - Damjanović, Domagoi ED - Guadagnini, Maurizio T1 - Optimizing in-situ testing for historic masonry structures: a case study BT - a case study T2 - International Conference on Sustainable Materials, Systems and Structures (SMSS 2019) : Durability, Monitoring and Repair of Structures, 20-22 March 2019, Rovinj, Croatia Y1 - 2019 UR - http://toc.proceedings.com/50441webtoc.pdf SN - 978-1-5108-9296-5 SP - 684 EP - 691 PB - RILEM Publications ER - TY - JOUR A1 - Schwanzer, Peter A1 - Rabl, Hans-Peter A1 - Loders, S. A1 - Seifert, P. A1 - Himmelstoss, S. A1 - Gaderer, Matthias T1 - Difference in the Tailpipe Particle Number by Consideration of Sub-23-nm Particles for Different Injection Settings of a GDI Engine JF - Emission control science and technology N2 - The purpose of this study was to investigate the characteristic of nanoparticles under consideration of sub-23-nm particles from a 1.8-l direct injection (DI) gasoline engine under stoichiometric air/fuel conditions in the exhaust gas system. For future CO2 challenges, the usage of DI-instead of port fuel injection (PFI)-gasoline engines is unavoidable. Therefore, a state of the art particle management program-particle number (PN) system, the Horiba SPCS (2100) with an integrated CPC (condensation particle counter), was recalibrated from a 50% cutoff (D-50%) at 23 nm down to a cutoff at 10 nm and the PCRF (particle concentration reduction factor) for sizes smaller than 23 nm was checked. Two different modal points, out of a representative Real Driving Emission (RDE) cycle, were investigated with both calibrations, D-50%=10 nm and D-50%=23 nm. For these different load points, the fuel pressure (FUP) and the start of injection (SOI) were varied, to represent the difference in the structure and the ratio conc((10 nm))/conc((23 nm)) of the nanoparticle emissions. The particle characterization includes the particle number (PN), the particle size distribution (PSD), and the particle mass (PM). The particle number was measured with Horiba SPCS (2100). The particle size distribution was analyzed with a Grimm differential mobility analyzer (DMA) in combination with a Faraday cup electrometer (FCE). Micro Soot and Pegasor were used to determine the PM, and an optical characterization was done with a 120-kV Phillips CM12 transmission electron microscope (TEM). The position of all particle measurement systems was downstream the three-way catalyst (TWC). The results of this investigation showed that a higher injection pressure decreases the PN (without consideration of sub-23-nm particles) in general. The ratio conc((10 nm))/conc((23 nm)) was therefore higher, because smaller particles, especially ash particles, were less reduced from the FUP. This means higher FUP tends to a higher ratio. For the SOI, the main reasons of the ratio differences were explained by an encroachment between the injection jet and the piston, the valve and the wall. KW - DoE KW - GDI KW - Particle number Y1 - 2019 U6 - https://doi.org/10.1007/s40825-019-0114-1 VL - 5 IS - 1 SP - 7 EP - 22 PB - Springer Nature ER - TY - GEN A1 - Altmann, Robert A1 - Rabl, Hans-Peter A1 - Gaderer, Matthias T1 - Phänomenologische Untersuchung des Einspritzverhaltens von Pflanzenölkraftstoff T2 - 3. Tagung der Fuels Joint Research Group (FJRG) "Kraftstoffe für die Mobilität von Morgen" Y1 - 2019 UR - https://www.researchgate.net/publication/335490299_Phanomenologische_Untersuchung_des_Einspritzverhaltens_von_Pflanzenolkraftstoff ER - TY - JOUR A1 - Hansen, B. A1 - Hoebler, Michael A1 - Purr, S. A1 - Meinhardt, J. A1 - Merklein, M. T1 - Basics for inline measurement of tribological conditions in series production of car body parts JF - IOP Conference Series: Materials Science and Engineering N2 - The quality of car body parts in series production is strongly dependent on the tribological behavior. Fluctuating material properties such as the sheet roughness and the amount of lubricant have an influence on the forming process. On the basis of large amounts of data it is possible to investigate the friction behavior in series production and to make process adjustments if required. Therefore, inline measurement systems have a great potential to detect the sheet roughness during the cutting process of blanks in the coil line. Furthermore, contactless systems are advantageous as they do not damage the surface. Nevertheless, the optical measuring is influenced by the lubricant layer on top of the surface. Therefore, the previously unknown impact of the lubricant on the measuring result is investigated. Within this study, stationary optical roughness measurements have been conducted using different amounts of lubricant on hot-dip galvanized EDT steel. The results demonstrate the influence of different amounts of lubricant on the sheet roughness measurement. Hence, it is possible to correct the inline measuring results and gain knowledge of fluctuating surface roughness. In addition, strip drawing test has been carried out to investigate the effect of fluctuating tribological conditions. Y1 - 2019 U6 - https://doi.org/10.1088/1757-899x/651/1/012050 VL - 651 PB - IOP Publishing ER - TY - JOUR A1 - Briem, Ulrich T1 - Biegesteifigkeit von Drahtseilen JF - Technische Logistik Y1 - 2019 IS - 11-12 SP - 24 EP - 25 PB - Huss-Medien CY - Berlin ER - TY - JOUR A1 - Chatzitakis, Paris A1 - Safarov, Javid A1 - Opferkuch, F. A1 - Dawoud, Belal T1 - Experimental investigation of an absorption heat pump with organic working pairs JF - Applied Thermal Engineering N2 - As part of a systematic approach towards the search for alternative absorption heat pump (AHP) working pairs that could potentially provide comparable performance to conventional ones, a previous work performed a detailed theoretical cycle analysis and simulation that revealed concrete correlations between key working fluid thermophysical properties and AHP performance indicators. Following this work, targeted combinations of two organic refrigerants, 2,2,2-trifluoroethanol (TFE) and 2,2,3,3,3-pentafluoropropanol (5FP) and two organic absorbents, 1,3-dimethyl-2-imidazolidinone (DMI) and 2-pyrrolidone (PYR) were tested in a prototype 5 kW AHP, based on a highly compact plate heat exchanger design, which has been previously introduced. The purpose of this effort was to test the findings of the previous work with experimental measurements. The working pair combinations were also subjected to vapor liquid equilibrium (VLE) and viscosity measurements, in order to determine reliable activity coefficient and improve the accuracy of the simulations. The experimental performance data agree well with the COP simulations and show to be consistent with the conclusions derived from the previous theoretical work. KW - Absorption heat pump KW - Coefficient of performance KW - FLUID KW - MIXTURES KW - Organic working pairs KW - Specific solution circulation Y1 - 2019 U6 - https://doi.org/10.1016/j.applthermaleng.2019.114311 VL - 163 IS - December PB - Elsevier ER - TY - CHAP A1 - Sterner, Michael A1 - Thema, Martin ED - Sterner, Michael ED - Stadler, Ingo T1 - Comparison of Storage Systems T2 - Handbook of Energy Storage N2 - There are several approaches to classifying energy storage systems (see Chaps. 1 and 2). Storage systems are used in a large number of different technologies at various stages of development, and in a wide range of application areas (see Chaps. 3 to 5). This chapter compares the capabilities of the different storage systems using the following criteria:This comparison of storage systems also provides a convenient overview of the various storage systems and their capabilities. Y1 - 2019 SN - 978-3-662-55503-3 U6 - https://doi.org/10.1007/978-3-662-55504-0_12 VL - 6 SP - 637 EP - 672 PB - Springer CY - Berlin, Heidelberg ER - TY - JOUR A1 - Keiner, Dominik A1 - Breyer, Christian A1 - Sterner, Michael T1 - Coupling heat and electricity storage technologies for cost and self-consumption optimised residential PV prosumer systems in Germany JF - International Journal of Sustainable Energy Planning and Management N2 - Coupling energy sectors within the emerging residential PV prosumer systems is necessary for an optimised use of the houseowners’ own produced electricity. But the pure availability of different energy technologies in the system is not enough. By optimising the electricity usage as well as the capacities of PV generators, storage technologies, heat pumps and battery electric vehicles, not only the best solution in a technical point of view can be achieved, the need of finding the most financially beneficial system composition for single-family houses and tenements is possible. The study provides a detailed model for average German single-family houses and tenements and results for the energy transition period until 2050 for the optimised energy systems regarding optimised PV and stationary battery capacities and different heat storage capacities. Most noticeable outcomes can be observed by using a vehicle-to-home car, where a car can mostly take over the tasks of a stationary battery and by introducing a solidarity model using this type of car in tenement systems. Y1 - 2019 U6 - https://doi.org/10.5278/ijsepm.2019.21.4 VL - 21 PB - OJS/PKP ER - TY - CHAP A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Entwicklung eines Regelverfahrens für einen optimierten und zentralen Blindleistungsabruf zur Beeinflussung des Blindleistungshaushaltes von Mittelspannungsverteilungsnetzen unter Einhaltung von Netzrestriktionen T2 - Zukünftige Stromnetze, 30.-31.Jan.2019, Berlin Y1 - 2019 SP - 421 EP - 437 PB - Conexio CY - Pforzheim ER - TY - GEN A1 - Sterner, Michael T1 - Insight into Power-to-Gas/Liquids: a solution for sustainable transport besides e-mobility T2 - Conference Low Carbon Transport - Engineering the Fuels of the Future (Institution of Mechanical Engineers), London 09.07.2019 KW - Erneuerbare Energien KW - Klimaneutralität KW - Energiewende KW - Sektorenkopplung KW - Power-to-Gas Y1 - 2019 PB - Institution of Mechanical Engineers CY - London ER - TY - CHAP A1 - Kraus, Hermann A1 - Gschoßmann, David A1 - Brückl, Oliver T1 - Automatisierung von Netzplanungsprozessen in der Verteilnetzebene – Q(U)- und cosj(P)-Blindleistungsregelung dezentraler Anlagen als spannungshaltende Netzausbaumaßnahmen T2 - Tagungsband Zukünftige Stromnetze 2019, 30.-31.Jan.2019, Berlin N2 - Diese Arbeit befasst sich mit automatisierten Netzplanungsprozessen und gibt einen kurzen Einblick in das Entscheidungsunterstützungssystem, welches im EU-Projekt CrossEnergy entwickelt wird. Detaillierter wird aber auf die Konzipierung und Umsetzung eines automatisierten Einsatzes der Blindleistungsregelung von dezentralen Erzeugungs­ analgen eingegangen, die als spannungshaltende Netzausbaumaßnahme zur Verfügung stehen. Die vorgestellten Methoden und Algorithmen fokussieren sich auf die Q(U)- und coscp(P)-Regelungsarten. Y1 - 2019 SP - 407 EP - 420 PB - Connexio CY - Pforzheim ER - TY - CHAP A1 - Sterner, Michael A1 - Eckert, Fabian A1 - Henning, Hans-Martin A1 - Trost, Tobias ED - Sterner, Michael ED - Stadler, Ingo T1 - Storage Demand in the Transport and Chemical Sector T2 - Handbook of Energy Storage N2 - In the transport sector, energy transition is still in its beginnings: shares of renewable fuels are at 5% and are, with the exception of a small percentage in electrical rail transport, almost entirely restricted to biofuel. The transport sector, i.e., road, air, shipping, and rail traffic, consumes around 30% of all final energy in Germany and its dependency of over 90% on petroleum is still very high. As a result, its shares in greenhouse gas emissions are at 20%. The necessary structural change in mobility, based on energy transition, is closely linked to the question of operating energy and of energy storage also. Aside from vehicles directly powered by wind or solar energy, mobility without storage is not possible: fuel tanks in cars, gas stations, and airplanes are omnipresent. The focus of the considerations on storage demand in the transport sector is on the question of how these storages can be used with renewable energies via bio and synthetic fuels, and on the question of how much storage is necessary for these new drive technologies, such as e-mobility. Before this, mobility needs today and in future need to be examined. In the chemical sector, the situation is very much alike: there is a great dependency on fossil resources, and decarbonization is inevitable to achieve ambitious climate goals. The structural change to convert and store renewable electricity as primary energy via power-to-X (PtX) represents a storage demand. First estimates will conclude this chapter. Y1 - 2019 SN - 978-3-662-55503-3 U6 - https://doi.org/10.1007/978-3-662-55504-0_5 SP - 165 EP - 188 PB - Springer CY - Berlin, Heidelberg ER - TY - CHAP A1 - Sterner, Michael A1 - Breuer, Christopher A1 - Drees, Tim A1 - Eckert, Fabian A1 - Maaz, Andreas A1 - Pape, Carsten A1 - Rotering, Niklas A1 - Thema, Martin ED - Sterner, Michael ED - Stadler, Ingo T1 - Storage Demand in Power Supply T2 - Handbook of Energy Storage N2 - Energy storage systems (in the past as well as today) are one significant part in the energy supply. The following three chapters describe how storage demand will develop in the future for the electricity, heat, and traffic sectors, as well as for non-energetic consumption of fossil resources (the chemical industry). Chapter 3, the core of this section on storage demand, makes clear how and why the electricity sector is the nucleus of the energy supply of all sectors and why it creates essential bridges between electricity, heat, and transport sectors, as well as with the chemical industry. If planned electricity network expansion takes place and flexibilities in generation and consumption are fully exploited, the demand for electricity storage, according to present estimates, will only reach a significant scale at 60–80% shares of renewable energy in the power supply. Network expansion has a great impact on the storage demand, as well as flexible power generation in power plants, combined heat and power (CHP), and flexible consumption via demand-side management (DSM). Four studies in the context of storage demand and the role of energy storage systems for flexibility are comprehensively addressed. The authors and the co-authors were themselves participants in these studies, which will be complemented by ongoing research. A meta-study summary of the main results is shown in Abschn. 3.7, and these results are compared with seven further studies. Y1 - 2019 SN - 978-3-662-55503-3 U6 - https://doi.org/10.1007/978-3-662-55504-0_3 SP - 51 EP - 136 PB - Springer CY - Berlin, Heidelberg ER - TY - CHAP A1 - Sterner, Michael ED - Sterner, Michael ED - Stadler, Ingo T1 - Energy Storage Through the Ages T2 - Handbook of Energy Storage N2 - Human beings have relied on stored energy since time immemorial. The planet’s first mechanism for storing energy arose two billion years ago. Photosynthesis captures solar energy in chemical bonds; it is a process on which all life depends. With the discovery of fire around one-and-a-half million years ago, early man learned to access this stored energy by burning wood. Only since the Industrial Revolution have humans used fossil fuels, which are the results of biomass produced millions of years ago, then subjected to geological processes. Today, the long-term objective is to utilize sustainable biomass storage, replicate it by technical means, and to develop new storage technologies. This chapter is about the history of energy storage as it pertains to the carbon cycle. It begins with a natural energy storage system—photosynthesis—and examines its products biomass, peat, and fossil fuels before turning to storage technology in the era of renewable energies. It will also discuss how stored energy is used. This chapter focuses on natural biogenic and fossil energy storage. Other chapters are devoted to artificial storage technologies, including batteries, pumped-storage, and power-to-gas (PtG). Each begins with a short history of its respective technology. Y1 - 2019 SN - 978-3-662-55503-3 U6 - https://doi.org/10.1007/978-3-662-55504-0_1 SP - 3 EP - 22 PB - Springer CY - Berlin, Heidelberg ER - TY - CHAP A1 - Sterner, Michael A1 - Stadler, Ingo A1 - Eckert, Fabian A1 - Gerhardt, Norman A1 - von Olshausen, Christian A1 - Thema, Martin A1 - Trost, Tobias ED - Sterner, Michael ED - Stadler, Ingo T1 - Storage Integration for Coupling Different Energy Sectors T2 - Handbook of Energy Storage N2 - Electricity is becoming the primary source of energy, a trend that is particularly apparent through the coupling of the electricity sector with other energy sectors. In addition to the established links between the electricity and heating sectors using combined heat and power (CHP), which is supplemented by electric heat-pumps and power-to-heat (PtH), other new links are also emerging. These links are manifesting in the form of electro-mobility and electric fuels in the electricity and transport sectors; and in the electricity and gas sector they are appearing in the form of power-to-gas (PtG). The production of basic chemical materials such as methanol or polymers using electrical energy, water, and CO2 will also play a role in the future. However, the latter will not be dealt with explicitly here. Instead we will consider in detail other aspects of electricity as a primary energy source and its integration and application for energy storage. Y1 - 2019 SN - 978-3-662-55503-3 U6 - https://doi.org/10.1007/978-3-662-55504-0_14 SP - 757 EP - 803 PB - Springer CY - Berlin, Heidelberg ER - TY - CHAP A1 - Sterner, Michael A1 - Stadler, Ingo A1 - Eckert, Fabian A1 - Thema, Martin ED - Sterner, Michael ED - Stadler, Ingo T1 - Storage Integration in Individual Energy Sectors T2 - Handbook of Energy Storage N2 - How is energy storage integrated and currently implemented in the electricity supply, heating supply, and mobility sectors? This chapter provides both theoretical and practical answers to that question. The chapter focuses on the integration of renewable energy. Cross-sectoral energy storage systems that link the electricity, heating, and mobility sectors are discussed in Kap. 14. This chapter focuses on storage integration in the electricity sector. After considering stand-alone networks, the chapter uses practical examples to analyze the various storage applications in the European network. The chapter concludes with a discussion of storage integration in the heating and transportation sectors. Y1 - 2019 SN - 978-3-662-55503-3 U6 - https://doi.org/10.1007/978-3-662-55504-0_13 SP - 675 EP - 755 PB - Springer CY - Berlin, Heidelberg ER - TY - CHAP A1 - Sterner, Michael A1 - Bauer, Franz ED - Sterner, Michael ED - Stadler, Ingo T1 - Definition and Classification of Energy Storage Systems T2 - Handbook of Energy Storage N2 - Energy supply always requires energy storage—either as an intrinsic property or as additional system. It is an intrinsic property of solid, liquid, and gaseous fuels, although less so of water-borne heat, but not of electricity. So to meet variable demands and supplies, heat and electricity networks usually require additional storage systems. When they are added to an energy network, should they be viewed as ‘suppliers’ or as ‘consumers’? Who is responsible for covering the costs of storage systems? To categorize storage systems in the energy sector, they first need to be carefully defined. This chapter defines storage as well as storage systems, describes their use, and then classifies storage systems according to temporal, spatial, physical, energy-related, and economic criteria. Y1 - 2019 SN - 978-3-662-55503-3 U6 - https://doi.org/10.1007/978-3-662-55504-0_2 SP - 23 EP - 47 PB - Springer CY - Berlin, Heidelberg ER - TY - JOUR A1 - Thema, Johannes A1 - Thema, Martin T1 - Nachnutzungskonzept: Braunkohle-Tagebaue als Pumpspeicherkraftwerk? JF - Energiewirtschaftliche Tagesfragen - et : Zeitschrift für Energiewirtschaft, Recht, Technik und Umwelt N2 - Der Anteil fluktuierender erneuerbarer Energien im deutschen Strommix steigt. Um die Netzstabilität zu erhalten, Fluktuationen im Dargebot nach Wetterlage und saisonal auszugleichen sind absehbar ab ca. 2030 große Stromspeicherkapazitäten erforderlich. Wasser-Pumpspeicherwerke sind derzeit die einzige langjährig erprobte Technologie, die künftig in Braunkohletagebauen, welche im Zuge der Energiewende aufgegeben werden, errichtet werden könnten. Eine Überschlagsrechnung am Beispiel eines Pumpspeicherwerks in verschiedenen Tagebauen zeigt, dass diese mit bis zu 400 GWh ein signifikantes technisches Speicherpotenzial haben. KW - Braunkohle KW - Energiewende KW - erneuerbare Energie KW - Pumpspeicherwerk KW - Speicherkapazität KW - Tagebau Y1 - 2019 VL - 69 IS - 4 SP - 38 EP - 39 PB - ETV Energieverl. CY - Essen ER -