TY - CHAP A1 - Hänninen, Risto A1 - Niemetz, Michael A1 - Schoepe, Wilfried T1 - Transition to turbulence in oscillatory superflows T2 - ETC 2013 - 14th European Turbulence Conference 2020: 2 September 2013 - 4 September 2013, Lyon, France N2 - The flow of superfluid helium-4 at very low temperatures around an oscillating microsphere has been studied in detail. At small oscillation amplitudes the drag force is linear in velocity amplitude. Above a critical velocity amplitude vc a transition from potential flow to turbulent flow is signaled by a large and nonlinear drag force that scales as (v2 - v2 c ), where vc is found to be independent of temperature (below 1 K) and of driving force. Interestingly, the critical velocity is found to scale as vc ~ √κω, where κ = h/m ≈ 10−7 m2/s (h is Planck's constant and m is the mass of a helium-4 atom) is the circulation quantum of the superfluid vortices and ω/2π is the oscillation frequency ranging from about 120 Hz to 700 Hz. We also observe slightly above vc that the flow pattern is unstable and switches intermittently between potential flow and turbulence. From time series recorded at constant drive and temperature we have investigated the statistical properties of this switching phenomenon. In this talk the universal law vc ~ √κω will be discussed in detail. It can be derived theoretically in various ways: firstly, from a qualitative but very general argument based on the "superfluid Reynolds number" Rs = vl/κ where v is the flow velocity and l is a characteristic length scale, secondly, and in more detail, from Kopnin's equation of the time dependence of the vortex line density, and, finally, we have obtained this law rigorously by dynamical scaling of the equations of motion of vortex dynamics. Y1 - 2020 UR - http://etc14.ens-lyon.fr/openconf/modules/request.php?module=oc_proceedings&action=view.php&a=Accept&id=17 ER - TY - CHAP A1 - Rieger, Anna A1 - Mühlbauer, Christian A1 - Rabl, Hans-Peter A1 - Weber, Rainer T1 - Dissonanz als Bewertungskriterium multi-tonalen Schalls T2 - Fortschritte der Akustik - DAGA 2020: 46. Deutsche Jahrestagung für Akustik Y1 - 2020 UR - https://www.dega-akustik.de/publikationen/online-proceedings/ SP - 788 EP - 791 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - CHAP A1 - Mühlbauer, Christian A1 - Rabl, Hans-Peter A1 - Rottengruber, Herrmann ED - Siebenpfeiffer, Wolfgang T1 - Development of a Methodology for Acoustic Analysis and Optimization of Mechatronic Fuel Injection Systems T2 - Automotive Acoustics Conference 2019: Proceedings, 5. Internationale ATZ-Fachtagung Fahrzeugakustik N2 - To identify the sound quality of fuel injection systems as a frontloading measure, a system test bench has been developed that simulates the structure and airborne noise emission. The setup of the system test bench includes an assembly of the acoustical relevant engine parts and an encapsulated drive for the high-pressure pump. A specific control unit enables a high variability for the operation strategy of the injection system. The focus of this study is on the development of a methodology to analyze and optimize the sound quality of gasoline direct injectors in critical operation points by suitable active means. For this, the injection parameters in engine idle have been identified and subsequently transferred to the system test bench. Additionally, the injection parameters have been optimized acoustically and the impacts on the key functions regarding injection rating and shot-to-shot scattering of the injected fuel mass are discussed. Y1 - 2020 SN - 978-3-658-27668-3 U6 - https://doi.org/10.1007/978-3-658-27669-0_15 SP - 211 EP - 225 PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Reindl, Andrea A1 - Meier, Hans A1 - Niemetz, Michael ED - Brinkmann, André ED - Karl, Wolfgang ED - Lankes, Stefan ED - Tomforde, Sven ED - Pionteck, Thilo ED - Trinitis, Carsten T1 - Scalable, Decentralized Battery Management System Based on Self-organizing Nodes T2 - Architecture of computing systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings N2 - Due to the transition to renewable energy sources and the increasing share of electric vehicles and smart grids, batteries are gaining in importance. Battery management systems (BMSs) are required for optimal, reliable operation. In this paper, existing BMS topologies are presented and evaluated in terms of reliability, scalability and flexibility. The decentralisation of BMSs and associated advantages are shown. A scalable, reconfigurable BMS based on a distributed architecture of self-organized, locally controlled nodes is proposed. For distributed system control, producers, batteries and consumers each are equipped with a local microcontroller based control unit, which monitors and controls the local parameters with its own computing and communication resources. Features, advantages and challenges to overcome of the proposed approach are described. KW - Availability Decentralized control KW - Battery management systems KW - Controller Area Network KW - distributed management KW - fault tolerant control KW - Multi-microcomputer system KW - Reconfigurable architectures KW - Renewable energy sources KW - Scalability KW - Topology Y1 - 2020 SN - 978-3-030-52793-8 U6 - https://doi.org/10.1007/978-3-030-52794-5_13 VL - 12155 SP - 171 EP - 184 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Anders, M. A1 - Briem, Ulrich A1 - Novak, G. A1 - Steinbach, G. ED - Katterfeld, André ED - Krause, Friedrich ED - Pfeiffer, Dagmar ED - Richter, Klaus T1 - Neue VDI-Richtlinie für die Seiltriebauslegung T2 - 28. Internationale Kranfachtagung 2020 "Kran 4.0: Potenziale der Digitalisierung", 4. und 5. März 2020, Magdeburg Y1 - 2020 SN - 978-3-947068-08-1 SP - 59 EP - 72 PB - LOGiSCH GmbH CY - Magdeburg ER - TY - CHAP A1 - Diamantidis, Dimitris A1 - Sýkora, Miroslav T1 - Reliability Differentiation and Uniform Risk in Standards BT - a Critical Review and a Practical Appraisal: kriticki pregled i prakticna ocjena T2 - Scientific Symposium Future Trends in Civil Engineering, Zagreb,Croatia, 17 October 2029 N2 - Reliability of structures and infrastructures is a major issue in structural engineering. Structural standards have traditionally been mainly concerned with public safety preventing loss of life or injury; this view has been shifting in recent years towards minimisation of economic loss. This contribution discusses the reliability differentiation principle in modern standards. Its aim is to achieve uniform risk levels for the various classes of structures. Codified criteria for reliability differentiation and risk informed decisions inherent in standards and especially in the Eurocodes are critically reviewed. It is shown that the classification of structures based on consequences of failure is an approach that has not been widely implemented in everyday design. Practical rules for the classification and implementation in design are needed and related proposals are presented. T2 - Razlikovanje pouzdanosti i ujednacenost rizika u propisima Y1 - 2020 U6 - https://doi.org/10.5592/CO/FTCE.2019.11 SP - 241 EP - 260 ER - TY - CHAP A1 - Rösel, Birgit T1 - A concept of a mainly digitalized course on control theory including problembased practical units and digital supported exams T2 - HEAd'20: Sixth International Conference on Higher Education Advances, June 2 - June 5 2020, Valencia (Spain) N2 - This paper decribes the concept of a course on control theory as a minor subject in the department of electrical engineering at the OTH Regensburg. The basis for a new concept is the idea of contructive alignment. The whole teaching module is devided in two blocks. The first block contains the teaching of the knowledge about control theory with an integrated approach for lectures, exercises and practical sessions. In the second block the students attent a practical work package to have the possibility to applicate and deepen their knowledge. To foster active participation the students are asked to document and reflect their work with the course context in an electronic portfolio. The exam of this module consists of three parts with respect to the different competencies obtained during the module. This concept develops not only the knowledge on control theory but personal and social competencies which are of growing interest. The aim of the paper is to present the idea of the concept. Following papers will illustrate the development process and the results obtained later on. Y1 - 2020 U6 - https://doi.org/10.4995/HEAd20.2020.11112 ER - TY - JOUR A1 - Malz, Sebastian A1 - Krenkel, Walter A1 - Steffens, Oliver T1 - Infrared Reflective Wall Paint in Buildings: Energy Saving Potentials and Thermal Comfort JF - Energy and Buildings N2 - The reduction of the energy demand of existing buildings is the main objective of building refurbishment. Managing the heat radiation properties of the wall construction is a possible way to develop highly effective and resource efficient insulation materials and concepts. The application of infrared reflective wall paints and coatings has been studied since the latter half of the 20th century. A brief review of the literature gives an account of the current research status. One has to realise that the conclusions are not uniformly consistent but depend strongly on the specific boundary conditions and investigated parameters. The study presented here discusses the usage of infrared reflective wall paint in conjunction with heat insulation for historic brick masonry. The possible energy savings are linked to the resulting thermal comfort. We identify critical parameters that must be taken into account when using infrared reflective wall paint and derive recommended design rules for the refurbishment of such building types. The findings prove that infrared reflective wall paint can decrease heat losses by 18% and up to 22% if comfort conditions are considered. Increasing energy savings can also cause the negative effect of high radiative asymmetry. Thus, each configuration must be observed in detail. KW - Infrared-reflective KW - Wall paint KW - Coating KW - Existing buildings KW - Radiative asymmetry KW - Energy efficiency Y1 - 2020 U6 - https://doi.org/10.1016/j.enbuild.2020.110212 SN - 0378-7788 VL - 224 IS - October PB - Elsevier ER - TY - JOUR A1 - Schulz, Carsten A1 - Schwarz, Colin T1 - Drivetrain fatigue strength characteristics of model-predictive control for wind turbines JF - Wind Energy N2 - Wind turbines play a crucial role in the revolution towards renewable resources. They need to be economically competitive to be sustainable. This still requires to lower the cost of energy (COE). To this end, nonlinear model predictive control (NMPC) is used within this paper. As known from literature, NMPC significantly improves the energy extracting performance as well as the mitigation of tower loads of wind turbines. As it is shown in this paper, the drivetrain fatigue strength drops disproportionally in parallel, which either increases the demands on the turbine design or decreases the lifetime of drivetrain components. Without additional boundary conditions to the underlying optimal control problems (OCPs), the application of energy-maximizing NMPC might so even raise the COE. Only penalizing axial torque oscillations by quadratic terms decreases energy-extracting performance below the level of classical wind turbine controllers. This makes more sophisticated conditions necessary. In this paper, the increase of the drivetrain damage by NMPC is analyzed, and appropriate boundary conditions are derived, to balance the two contradicting objectives of energy maximization and drivetrain load mitigation. An NMPC approach based on indirect methods is used, to obtain a solution of the OCPs very efficiently. It applies the Hamilton equations and Pontryagin's maximum principle. Its accuracy and efficiency to solve OCPs was presented over the last decades. Y1 - 2020 U6 - https://doi.org/10.1002/we.2520 VL - 23 IS - 12 SP - 2137 EP - 2149 PB - Wiley ER - TY - CHAP A1 - Sippenauer, Thomas A1 - Brückl, Oliver T1 - Verankerung von Flexibilität in der Netzplanung T2 - ScienceLab (begleitender Workshop zur Konferenz Zukünftige Stromnetze: 29.-30. Januar 2020, Berlin) N2 - Im Rahmen des Projektes C/sells wurden mehrere Mittelspannungsnetze modelliert, um die aktuellen Spannungsverhältnisse und Leitungsauslastungen nachbilden zu können. Zudem wurden, angelehnt an den Netzentwicklungsplan, Szenarien für den zukünftigen PV-Zubau und die potenzielle Entwicklung der Elektromobilität entworfen. Auf Basis der Ergebnisse lässt sich eine Netzanalyse hinsichtlich Spannungs- und Stromgrenzwertüberschreitungen sowie zu deren potenziellen Auftrittszeitpunkten und Auftrittsdauern durchführen. Parallel wurde anhand von Sensitivitätsanalysen untersucht, welche Wirksamkeit Flexibilitätseinsätze an den verschiedenen Netzknoten auf den Engpass haben. Dadurch kann bestimmt werden, wie effektiv die verfügbaren, in der Regel örtlich gebundenen Flexibilitätsanbieter eingesetzt werden können. Da die Sensitivitäten arbeitspunktabhängig sind, wurden verschiedene Zeitpunkte im Jahresverlauf berechnet und die jeweilige Änderungen der Wirksamkeit ausgewertet. Neben der Höhe der Leistungsabweichung wurde die Flexibilitätsanforderung auch anhand der Einsatzzeitpunkte und Einsatzdauer sowie anhand der Häufigkeit der nötigen Flexibilitätseinsätze charakterisiert. Aus den gewonnenen Erkenntnissen soll abgeleitet werden, inwiefern sich der flexible Einsatz der Verbrauchsanlagen in der Netzplanung verankern lässt. Besonders relevant ist deshalb, mit welcher Verlässlichkeit die Flexibilität abgerufen werden kann. Eine sehr hohe Verlässlichkeit lässt sich je nach Flexibilitätsanbieter möglicherweise nicht oder nur zu sehr hohen Preisen gewährleisten. Die Eignung der Flexibilitätseinsätze wird somit sowohl aus technischer als auch aus wirtschaftlicher Sicht bewertet. Da eine vollständige Verlässlichkeit ohnehin nicht sichergestellt werden kann (technische Störungen einer Anlage, Wettereinflüsse, etc.), werden auch Fallback-Strategien, z. B. Einspeisespitzenkappung, in die Analyse einbezogen. KW - Netzplanung KW - Flexibilität KW - Netzanalyse Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55592 SN - 978-3-948176-07-5 SP - 77 EP - 81 PB - Conexio GmbH CY - Pforzheim ER - TY - CHAP A1 - Sippenauer, Thomas A1 - Brückl, Oliver T1 - Erschließung der Flexibilitätspotenziale eines Trinkwasserversorgungssystems T2 - ScienceLab (begleitender Workshop zur Konferenz „Zukünftige Stromnetze“: 2020, Berlin) N2 - In Zusammenarbeit mit den Kreiswerken Cham wurde an der OTH Regensburg das Trinkwasserversorgungsgebiet mit allen relevanten Pumpen und Hochbehältern nachgebildet. Mithilfe des Modells kann die aktuelle, füllstandgesteuerte Betriebsweise unter Einhaltung der Randbedingungen (Grenzwerte der Behälterfüllstände, elektrische Verschaltung der Pumpen) simuliert werden. Daraus lässt sich auch das gesicherte, für die Netzplanung geeignete Flexibilitätspotenzial anhand der Leistungsabweichung gegenüber dem regulären Fahrplan, der Einsatzdauer, dem Einsatzzeitpunkt und der Pause zwischen den Flexibilitätsabrufen charakterisieren. In einem Feldversuch wurde vordergründig untersucht, inwiefern der Einsatz von Flexibilität in der Trinkwasserversorgung technisch umsetzbar ist. KW - Netzplanung KW - Flexibilitätspotenzial KW - Trinkwasserversorgung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55629 SN - 978-3-948176-07-5 SP - 126 EP - 130 PB - Conexio GmbH CY - Pforzheim ER - TY - CHAP A1 - Kraus, Hermann A1 - Brückl, Oliver T1 - Use and Programmatic Extension of PowerFactory for the Implementation of Automated Network Planning at the Distribution Grid Level T2 - 2020 10th International Conference on Advanced Computer Information Technologies (ACIT): 16-18 Sept. 2020 N2 - In this paper it is presented how the network calculation program PowerFactory is used to implement automated network planning algorithms. PowerFactory’s internal functions and data sets are discussed and it is shown how the functions and data sets have been extended by specially developed scripts to enable the automation of network planning steps. Finally, the methodology applied to calculate grid use cases is briefly discussed. KW - automated grid planning KW - Current measurement KW - distribution grid KW - grid data handling KW - Load flow KW - Load modeling KW - Loading KW - Planning KW - Power cables KW - PowerFactory KW - Reactive power Y1 - 2020 U6 - https://doi.org/10.1109/ACIT49673.2020.9208900 SP - 731 EP - 736 PB - IEEE ER - TY - CHAP A1 - Hopfensperger, Bernhard A1 - Daubner, Andreas A1 - Herrmann, Fabian A1 - Hopkins, Andrew A1 - Mellor, Phil T1 - Investigation of Shifted PWM Methods for a Dual Three-Phase System to Reduce Capacitor RMS Current T2 - PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings] N2 - Mild hybrid automotive topologies containing a 48V high power (>15 kW) electric drive system demand a high integration of power electronics and electrical machine. A multi-phase motor winding topology helps to keep the per-phase operating currents to a reasonable level. Close integration and multi-phase system have led to a drive system with dual 3-phase systems supplied by a common 48V DC-link, which allows to shift PWM patterns for reduction of DC-link capacitor ripple current and size. This paper derives some basic rules for combinations of common PWM methods for dual 3-phase systems without magnetic cross-coupling. Experimental measurements verify simulated results. KW - Elektroantrieb KW - dual three phase system Y1 - 2020 UR - https://ieeexplore.ieee.org/document/9177989 SN - 978-3-8007-5245-4 SP - 124 EP - 131 PB - VDE-Verlag CY - Berlin, Offenbach ER - TY - CHAP A1 - Lang, Christian A1 - Steinborn, Florian A1 - Steffens, Oliver A1 - Lang, Elmar Wolfgang ED - Valenzuela, O. ED - Rojas, F. ED - Herrera, L.J. ED - Pomares, H. ED - Rojas, I. T1 - Applying a 1D-CNN Network to Electricity Load Forecasting T2 - Theory and Applications of Time Series Analysis N2 - This paper presents a convolutional neural network (CNN) which can be used for forecasting electricity load profiles 36 hours into the future. In contrast to well established CNN architectures, the input data is one-dimensional. A parameter scanning of network parameters is conducted in order to gain information about the influence of the kernel size, number of filters and number of nodes. Furthermore, different dropout methods are applied to the CNN and are evaluated. The results show that a good forecast quality can already be achieved with basic CNN architectures, the dropout improves the forecast. The method works not only for smooth sum loads of many hundred consumers, but also for the load of single apartment buildings. KW - Energy load forecasting KW - STLF KW - Neural networks KW - CNN KW - Convolutional networks Y1 - 2020 U6 - https://doi.org/10.1007/978-3-030-56219-9_14 SP - 205 EP - 218 PB - Springer ER - TY - JOUR A1 - Lang, A. A1 - Monkman, Gareth J. T1 - An analysis of the electrical capacitance between two conducting spheres JF - Journal of Electrostatics N2 - Many modern composites consist of dielectric polymer matrices containing embedded spherical particles. These particles can be electrically conducting and often have magnetic properties. In order to accurately model and simulate such materials, precise calculation of the electrical capacitance between identically sized spheres is required. This is of particular relevance at microscopic dimensions where many smart material-based micro devices are concerned. This may appear trivial for a small number of particles. However, many methods or their analysis appear to be questionable or not applicable at reduced dimensions. In this work, the various methods of analysis are scrutinized before being compared with both simulation and direct measurements. It is surprising to note that of the many works investigated only 3 are in close agreement with both simulation and measurement. Graphical abstract This paper deals with the precise calculation of the electrical capacitance between two conducting spheres of equal, or near equal size.The calculations have been verified by both experimental measurements and simulation. Algorithms in MatLab (Octave) format have been included in the supporting information. KW - Capacitance between spheres KW - Calculation KW - Simulation Experiment Y1 - 2020 U6 - https://doi.org/10.1016/j.elstat.2020.103518 VL - 108 PB - Elsevier ER - TY - JOUR A1 - Chen, Rui A1 - Zhang, Zhuo A1 - Song, Ruizhou A1 - Fang, Cheng A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. A1 - Guo, Jianglong T1 - Time-dependent electroadhesive force degradation JF - Smart Materials and Structures N2 - This paper concerns a comprehensive investigation of time-dependent electroadhesion (EA) force degradation. EA shear force tests on different object materials (a PET, glass, ABS, and wood plate) have shown that force degradation was dominated by residual polarization charges trapped in the EA pad dielectric rather than in the substrate dielectric from which the object to be prehended is made. In order to explain this dynamic physical phenomenon, a model of dielectric polarization and depolarization has been proposed. According to the derived relationship between EA force and discharge time, three different methods intended to mitigate this problem has been compared: (1) the natural discharge method, (2) the high voltage resistor discharge method, and (3) the discharge prior to field polarity reversal method. These methods are useful for generating repeatable and stable EA forces, which are required for the characterization of EA pads and their subsequent employment in material handling, mobile robot crawling and climbing tasks. Y1 - 2020 U6 - https://doi.org/10.1088/1361-665X/ab79b5 VL - 29 IS - 5 PB - IOP Publishing ER - TY - JOUR A1 - Haug, Sonja A1 - Vetter, Miriam A1 - Weber, Karsten T1 - Gebäudesanierung zwischen Energieeffizienz und Sozialverträglichkeit BT - Zwei empirische Fallstudien JF - TATuP - Zeitschrift für Technikfolgenabschätzung in Theorie und Praxis N2 - Die Akzeptanz unter Bewohnern und Bewohnerinnen gewinnt bei hoch komplexen, technisch anspruchsvollen energetischen Sanierungen als „Innovationsmotor“ zunehmend an Relevanz. Der Beitrag basiert auf zwei Fallstudien zur partizipativen Nutzereinbindung bei energetischen Sanierungen im genossenschaftlichen Wohnbau historischer Stadtquartiere in Regensburg. Neben einer sozialverträglichen Sanierung wurde jeweils ein hohes Maß an Energieeffizienz bei den technischen Lösungen ange-strebt. Haushaltsbefragungen und qualitative Interviews zeigen die hohe Akzeptanz von Sanierungsmaßnahmen, sofern die Senkung der Energiekosten die erhöhte Miete kompensiert. Abschließend werden Akzeptanzfaktoren wie Partizipation, Vertrauen, Sozialverträglichkeit und Autarkie erörtert. T2 - Building restoration between energy efficiency and user acceptance KW - Altbaumodernisierung KW - Energieeinsparung KW - Sozialverträglichkeit KW - Fallstudie KW - energy-efficient building restoration KW - user acceptance KW - household survey KW - historic quarter KW - renewable energy Y1 - 2020 U6 - https://doi.org/10.14512/tatup.29.3.56 SN - 2567-8833 VL - 29 IS - 3 SP - 56 EP - 63 PB - oekom-Verlag ER - TY - JOUR A1 - Bringout, Gaël A1 - Erb, Wolfgang A1 - Frikel, Jürgen T1 - A new 3D model for Magnetic Particle Imaging using realistic magnetic field topologies for algebraic reconstruction JF - Inverse Problems N2 - We derive a new 3D model for magnetic particle imaging (MPI) that is able to incorporate realistic magnetic fields in the reconstruction process. In real MPI scanners, the generated magnetic fields have distortions that lead to deformed magnetic low-field volumes with the shapes of ellipsoids or bananas instead of ideal field-free points (FFP) or lines (FFL), respectively. Most of the common model-based reconstruction schemes in MPI use however the idealized assumption of an ideal FFP or FFL topology and, thus, generate artifacts in the reconstruction. Our model-based approach is able to deal with these distortions and can generally be applied to dynamic magnetic fields that are approximately parallel to their velocity field. We show how this new 3D model can be discretized and inverted algebraically in order to recover the magnetic particle concentration. To model and describe the magnetic fields, we use decompositions of the fields in spherical harmonics. We complement the description of the new model with several simulations and experiments, exploring the effects of magnetic fields distortion and reconstruction parameters on the reconstruction. Y1 - 2020 U6 - https://doi.org/10.1088/1361-6420/abb446 VL - 36 IS - 12 PB - IOP Publishing ER - TY - THES A1 - Rauch, Johannes T1 - Entwicklung eines Regelverfahrens für einen optimierten und zentralen Blindleistungsabruf zur Beeinflussung des Blindleistungshaushalts von Mittelspannungsnetzen unter Einhaltung von Netzrestriktionen N2 - Die Energiewende führt zu neuen Herausforderungen für Verteilungsnetzbetreiber hinsichtlich der Er-bringung von Systemdienstleistungen, der Integration weiterer Erzeugungsanlagen und Lasten sowie der Gewährleistung einer hohen Versorgungssicherheit und normgerechten Spannungsqualität. Die De-ckung der auftretenden Blindleistungsbedarfe seitens der Netzbetriebsmittel, Verbraucher und Erzeu-gungsanlagen gewinnt durch den Wegfall der Großkraftwerke für Netzbetreiber zunehmend an Bedeu-tung. Das Projekt SyNErgie beschäftigt sich diesbezüglich mit der Entwicklung neuartiger Blindleis-tungsmanagementsysteme für Mittelspannungsnetze. Ziel ist es, das bisher ungenutzte, freie Blindleis-tungspotential betrieblicher Kompensationsanlagen und dezentraler Erzeugungsanlagen (allgemein: Blindleistungsquellen) zu nutzen, um die Blindleistungsänderungsfähigkeit eines Verteilungsnetzes zu erhöhen. Diese Arbeit beschäftigt sich mit der Entwicklung eines zentralen Blindleistungsregelsystems, bei dem Blindleistungsquellen auf Basis von „Optimal Power Flow“-Berechnungen über eine zentrale Recheninstanz angesteuert werden. Zum Einsatz kommt dabei ein Optimierungsalgorithmus, der auf Basis des aktuellen Netzzustandes (Spannungs- und Auslastungsreserven) und des aktuellen Blindleis-tungspotentials der Blindleistungsquellen einen bedarfsoptimalen Abruf koordiniert. Das zentrale Re-gelverfahren wird in Netzmodellen verschiedenartiger Mittelspannungsnetzgruppen und unterschiedli-cher Art und Anzahl von Blindleistungsquellen angewendet sowie im Hinblick auf variierende Zielvor-gaben und Randbedingungen evaluiert und diskutiert. KW - Netzbetriebsführung KW - Blindleistungsmanagement KW - Optimierung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-6595 ER - TY - JOUR A1 - Keim, Vincent A1 - Paredes, Marcelo A1 - Nonn, Aida A1 - Münstermann, Sebastian T1 - FSI-simulation of ductile fracture propagation and arrest in pipelines BT - Comparison with existing data of full-scale burst tests JF - International Journal of Pressure Vessels and Piping N2 - The fracture propagation and arrest control for pipelines transporting rich natural gases and high vapor pressure liquids is based on the Battelle Two-Curve Model (BTCM). Distinct limitations of this model were demonstrated for past and modern steels and gas mixtures. These can be related to the insufficient description of individual physical processes and interactions between the pipe material and transported mixture during the running ductile fracture. In the past, fluid-structure interaction (FSI) models enabled a more sophisticated, coupled analysis of the failure scenario. To quantify their capability of describing the multi-physical processes, the FSI models need to be verified by experimental data from full-scale burst tests (FSBT). Therefore, this paper deals with the simulation of five FSBTs from the literature on API grade X65 pipes with different pipe geometries, mixtures and initial conditions. The FSI is modeled by the coupled Euler-Lagrange (CEL) method. The modified Mohr-Coulomb (MMC) model is implemented in the CEL framework to describe the deformation and ductile fracture in the X65/L450 pipes. 3D Euler equations are used to calculate the mixture decompression with the GERG-2008 equation of state defining the volumetric behavior of a CO2-rich mixture, CH4 and H2. The extended model considers the effect of soil backfill on the pipe deformation and inertia. The numerical predictions agree well with the experimental findings in terms of the crack propagation speed and arrest length underlining the capability of the developed numerical tool. KW - Running ductile fracture KW - Crack arrest KW - Fluid-structure interaction KW - MMC model KW - CO2 decompression KW - Bruchmechanik KW - Fluid-Struktur-Wechselwirkung KW - Pipeline KW - Simulation Y1 - 2020 U6 - https://doi.org/10.1016/j.ijpvp.2020.104067 VL - 182 IS - May PB - Elsevier ER -