TY - CHAP A1 - Pongratz, Christian A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Stolle, Reinhard T1 - Structural Dynamic Analysis of Thin Composite Plates Using Noncontact Measurement and Excitation T2 - Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016 Y1 - 2016 SN - 978-3-86460-494-2 SP - 351 EP - 358 PB - Pro Business Verlag CY - Berlin ER - TY - RPRT A1 - Pongratz, Christian A1 - Ehrlich, Ingo ED - Baier, Wolfgang T1 - DampSIM: Lebensdauerüberwachung von faserverstärkten Kunststoffen auf Basis der strukurdynamischen Werkstoffdämpfung T2 - Forschungsbericht 2017 / Ostbayerische Technische Hochschule Regensburg Y1 - 2017 UR - https://doi.org/10.35096/othr/pub-1383 SN - 978-3-9818209-3-5 SP - 62 EP - 63 ER - TY - RPRT A1 - Pongratz, Christian A1 - Ehrlich, Ingo ED - Baier, Wolfgang T1 - High-End-Strukturen für den Leichtbau – mit faserverstärktem 3D-Druck T2 - Forschung 2018 / Ostbayerische Technische Hochschule Regensburg Y1 - 2018 UR - https://doi.org/10.35096/othr/pub-1382 SN - 978-3-9818209-4-2 SP - 64 EP - 65 ER - TY - GEN A1 - Judenmann, Anna A1 - Pongratz, Christian A1 - Ehrlich, Ingo A1 - Höfer, Philipp A1 - Holtmannspötter, Jens T1 - Additive Fertigung von endlosfaserverstärkten Kunststoffstrukturen T2 - Münchner Leichtbauseminar 2022, 26. October 2022, 16. November 2022, 30 November 2022, Munich/Neubiberg/Garching N2 - Additive Fertigung hat sich in zahlreichen industriellen Anwendungen etabliert und bildet eine wichtige Schlüsseltechnologie. Im Gegensatz zu metallischen Werkstoffen, haben additiv gefertigte Bauteile aus Kunststoffen geringere Festigkeit und Steifigkeit, sodass sich ihre Verwendung als lasttragende Strukturen schwierig gestaltet. Insbesondere der Einsatz von endlosen Verstärkungsfasern kann die mechanischen Eigenschaften additiv gefertigter Strukturen signifikant verbessern und die Fertigung hochbelastbarer Faserverbundstrukturen im 3D-Druckverfahren ermöglichen. Daher gilt es aktuell notwendige Anlagen und Prozessketten für den Fertigungsprozess aber auch Vorgehensweisen für die belastungsoptimierte Auslegung der Faserverläufe innerhalb des Bauteils zu entwickeln, um so das Themengebiet „Endlosfaserverstärkter 3D-Druck“ weiter voranzutreiben. Für mehr räumliche Freiheit bei der Positionierung der Druckbahnen können industrieroboterbasierte Systeme eingesetzt werden, um so das Potenzial gerichteter Bauweise von Faserverbundstrukturen auch im additiven Fertigungsprozess vollumfänglich ausschöpfen zu können. Dabei ermöglicht ihr Einsatz auch eine räumliche Ablage der Faserverstärkung, wobei für die Materialablage ein geeigneter 3D-Druckkopf erforderlich ist. Für die Implementierung der Faserverstärkung ist zudem eine dem Lastfall entsprechende Auslegung des Bauteils sowie die Ermittlung einer sinnvollen Faserpositionierung innerhalb des Bauteils erforderlich, wobei unterschiedliche Variablen aus den Bereichen Material, Struktur und Fertigungsprozess berücksichtigt werden müssen. Im Rahmen des Vortrages werden die Herausforderungen der Technologieentwicklung des endlosfaserverstärkten 3D-Drucks aufgegriffen sowie auf eine belastungsorientierte Faserpositionierung näher eingegangen. Aktuelle Erkenntnisse werden diskutiert sowie eine Entwurfsmethodik für die Prozesspfadgenerierung vorgeschlagen. KW - additive manufacturing KW - continuous fiber KW - composites KW - toolpath Y1 - 2022 ER - TY - JOUR A1 - Niedernhuber, Michal A1 - Holtmannspötter, Jens A1 - Ehrlich, Ingo T1 - Fiber-oriented repair geometries for composite materials JF - Composites, Part B N2 - In this paper, the idea of fiber-oriented repair geometries for carbon fiber reinforced plastics (CFRP) is investigated. It considers the differing mechanical properties of unidirectional fiber reinforced material by excluding overlapping regions perpendicular to the fiber direction of the particular layer. A mechanical and numerical comparison of tensile strength of stepped joints with continuous step lengths per ply and stepped joints with reduced step lengths in plies with fiber orientation differing from load direction is performed. Finite element simulations show similar shear stresses. Mechanical tests of CFRP laminates with stepped joints show no significant deviation in tensile strength, in spite of a joint length reduction of nearly 40%. This leads to the possibility of a significant reduction of repair area. Y1 - 2016 U6 - https://doi.org/10.1016/j.compositesb.2016.03.027 VL - 94 SP - 327 EP - 337 ER - TY - JOUR A1 - Pongratz, Christian A1 - Schlamp, Matthias A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Petratos, P. A1 - Mourtos, N. T1 - Detection of Delamination Damages in Thin Composite Plates using Noncontact Measurement of Structural Dynamic Behavior JF - Athens Journal of Technology & Engineering Y1 - 2016 U6 - https://doi.org/10.30958/AJTE.3-4-3 VL - 3 IS - 4 SP - 315 EP - 331 ER - TY - JOUR A1 - Xue, Lufeng A1 - Keim, Vincent A1 - Paredes, Marcelo A1 - Nonn, Aida A1 - Wierzbicki, Tomasz T1 - Anisotropic effects on crack propagation in pressurized line pipes under running ductile fracture scenarios JF - Engineering fracture mechanics N2 - The current analyses present results of running ductile fracture propagation in high strength X100 line pipe steels under the influence of anisotropy. Mechanical anisotropy is commonly available in pipe products as a result of the manufacturing process, especially, those subjected to hot/cold-worked deformation. The outcomes of the present analyses show that its effect on the behavior of running ductile fracture in cracked pipes undergoing depressurization is meaningful. For instance, the Crack-Tip Opening Angle (CTOA) not only exhibits a strong dependence to the pipe's diameter size, but also to the material's anisotropy nature when compared to a hypothetical isotropic material. Moreover, laboratory scale tests such as those performed on Battelle Drop Weight Tear (BDWT) samples provide useful information about initiation of ductile crack propagation when the anisotropy features are taken into account in the material description. KW - BEHAVIOR KW - Fracture anisotropy KW - INITIATION KW - MODEL KW - Non-associated flow rule KW - PREDICTION KW - Rate dependent MMC Model KW - Running ductile fracture KW - STATE KW - STEEL KW - STRAIN-RATE KW - TOUGHNESS Y1 - 2021 U6 - https://doi.org/10.1016/j.engfracmech.2021.107748 VL - 249 PB - Elsevier ER - TY - PAT A1 - Olbrich, Florian A1 - Pongratz, Christian A1 - Bierl, Rudolf A1 - Ehrlich, Ingo T1 - Method and System for Evaluating a Structural Integrity of an Aerial Vehicle Y1 - 2024 ER - TY - CHAP A1 - Nonn, Aida A1 - Marx, P. T1 - Validated Multiphysics Modeling For Advanced Pipeline Integrity Management T2 - ADIPEC, November 4–7, 2024, Abu Dhabi, UAE N2 - The aim of this paper is to present practical steps for utilizing a validated multiphysics approach for fracture control in CO2 pipelines within the framework of Carbon Capture Transport and Storage (CCTS). Ensuring the arrest of running ductile fracture (RDF) is a crucial safety requirement for the transportation of dense-phase CO2. However, current standards rely on outdated and restrictive methods, imposing severe limitations on pipeline material and structural design. As a result, projects that fall outside these standards face the need for extremely costly tests, often leading to delays or cancellations of CCTS initiatives. This study introduces an advanced, validated, fully-coupled fluid-structure interaction (FSI) model designed to accurately predict fracture propagation in CO2 pipelines. A key advantage of this approach is its use of robust and reproducible calibration and validation procedures combined with high-quality material characterization data. The full coupling of structural, fluid, and backfill models is essential for obtaining precise results, not only in determining arrest occurrence but also in analyzing properties such as fracture velocity history, 3D pressure distributions behind the propagating crack, wall thinning, and crack tip opening angle. The FSI model has demonstrated its value as a cost-effective tool for safety assessments, enabling the development of fracture control plans that specify minimum required material properties and fluid compositions for optimized pipeline design, both onshore and offshore. Additionally, performing virtual studies with the parameterized FSI model enables the generation of synthetic data for training and validating a machine learning surrogate model. This surrogate model can be integrated into industrial practices, facilitating the application of multiphysics modeling without the need for extensive expertise. Y1 - 2024 U6 - https://doi.org/10.2118/222279-MS ER - TY - GEN A1 - Schimmer, Florian A1 - Gebhardt, Jakob A1 - Motsch-Eichmann, N. A1 - Hausmann, Joachim M. A1 - Ehrlich, Ingo T1 - The effect of curvature on the low-velocity impact resistance of CF/PEEK laminates T2 - 30 Years IVW Anniversary Colloquium, Leibnitz-Institut für Verbundwerkstoffe Kaiserslautern, 2021 Y1 - 2021 ER - TY - JOUR A1 - Afanasev, Anna A1 - Höfer, Philipp A1 - Holtmannspötter, Jens A1 - Zimmer, Felix A1 - Ehrlich, Ingo T1 - Development of a continuous fiber-reinforced 3D printing process with a 6-axis robot arm: Process design and equipment JF - The International Journal of Advanced Manufacturing Technology N2 - The utilisation of 3D printing processes in the fabrication of continuous fiber-reinforced composites confers a multitude of advantages, in particular flexible design based on structural requirements. In order to achieve greater flexibility, there is a necessity for 3D printing systems that allow for customisable material selection and fiber positioning. This paper presents the design of a robot-based 3D printing system that incorporates an in-situ impregnation line and flexibility regarding the machine code generation for fiber positioning. The development of the system enabled the attainment of an average fiber volume content of up to 37.12%. In the tensile tests, material characteristics up to E1 = 24.7 GPa and strength of up to RM1 = 0.51 GPa were determined. Y1 - 2026 U6 - https://doi.org/10.1007/s00170-025-17263-3 SN - 0268-3768 N1 - Corresponding author der OTH Regensburg: Anna Afanasev PB - Springer ER - TY - JOUR A1 - Qiao, Yu A1 - Grad, Marius A1 - Nonn, Aida T1 - Toward an Efficient and Robust Process–Structure Prediction Framework for Filigree L-PBF 316L Stainless Steel Structures JF - Metals N2 - Additive manufacturing (AM), particularly laser powder bed fusion (L-PBF), provides unmatched design flexibility for creating intricate steel structures with minimal post-processing. However, adopting L-PBF for high-performance applications is difficult due to the challenge of predicting microstructure evolution. This is because the process is sensitive to many parameters and has a complex thermal history. Thin-walled geometries present an added challenge because their dimensions often approach the scale of individual grains. Thus, microstructure becomes a critical factor in the overall integrity of the component. This study focuses on applying cellular automata (CA) modeling to establish robust and efficient process–structure relationships in L-PBF of 316L stainless steel. The CA framework simulates solidification-driven grain evolution and texture development across various processing conditions. Model predictions are evaluated against experimental electron backscatter diffraction (EBSD) data, with additional quantitative comparisons based on texture and morphology metrics. The results demonstrate that CA simulations calibrated with relevant process parameters can effectively reproduce key microstructural features, including grain size distributions, aspect ratios, and texture components, observed in thin-walled L-PBF structures. This work highlights the strengths and limitations of CA-based modeling and supports its role in reliably designing and optimizing complex L-PBF components. Y1 - 2025 U6 - https://doi.org/10.3390/met15070812 SN - 2075-4701 VL - 15 IS - 7 PB - MDPI ER -