TY - CHAP A1 - Wenzl, C. ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Bogner, Werner T1 - Comparison of Analytical and Numerical Results for the Deformation of Circular Curved Structures under Pressure Load T2 - Applied Research Conference 2018 - ARC 2018, 10 July 2018 Deggendorf Y1 - 2018 SN - 978-3-96409-018-8 SP - 150 EP - 155 PB - Pro Business GmbH CY - Berlin ER - TY - CHAP A1 - Faber, M. A1 - Kastenmeier, Andreas A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Stolle, Reinhard T1 - Three-dimensional finite element analysis of a composite tube with multi-row bolted joints T2 - Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016 Y1 - 2016 PB - Pro Business Verlag CY - Berlin ER - TY - CHAP A1 - Gebhardt, Jakob ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Bogner, Werner T1 - Low Velocity Impact of GFRP Laminate – Experimental Observations and Numerical Modelling T2 - Applied Research Conference 2018 - ARC 2018, 10 July 2018 Deggendorf Y1 - 2018 SN - 978-3-96409-018-8 SP - 211 EP - 215 PB - Pro Business GmbH CY - Berlin ER - TY - CHAP A1 - Ibanez Gomez, D. A1 - Kastenmeier, Andreas A1 - Ehrlich, Ingo ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - Development and construction of a winding machine for the production of composite tubes T2 - 4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 SP - 315 EP - 318 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Bruland, Matthias A1 - Schmid, Vinzent A1 - Ehrlich, Ingo ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - Analyzing and Testing of a Single Solution of Self-cutting Thread Inserts in Composites T2 - Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 SP - 286 EP - 288 PB - Shaker ER - TY - JOUR A1 - Schimmer, Florian A1 - Ladewig, Sven A1 - Motsch, Nicole A1 - Hausmann, Joachim M. A1 - Ehrlich, Ingo T1 - Comparison of Low-Velocity Impact Damage Behavior of Unidirectional Carbon Fiber-Reinforced Thermoset and Thermoplastic Composites JF - Key Engineering Materials N2 - This paper investigates the damage behavior of thermoset and thermoplastic fiber-reinforced composites. The specimens were subjected to low-velocity impacts (LVI) to produce barely visible impact damages (BVID). To compare the dependency of the matrix system and the laminate lay-up on the impact damage, four test series were set up. Therefore, laminates with an epoxy (EP) and a polyether ether ketone (PEEK) matrix in a quasi-isotropic (QI) [+45/0/-45/90]2s and an orthotropic (OT) fiber lay-up [0/90]4s were manufactured. To eliminate the influence of variant fiber systems, the thermoplastic tape and the thermoset prepreg contain similar carbon fibers (CF). After impact testing with three different impact energies, inner damages were investigated by using ultrasonic analyses. To get a deeper understanding of the interior damage mechanisms, cross sections of the damaged areas were examined via reflected light microscopy. By using these destructive and non-destructive test methods, significant differences in the damage behavior of composites with thermoplastic and thermoset matrix systems were identified for both laminate lay-ups. KW - Barely Visible Impact Damage KW - Carbon Fiber Reinforced Plastic KW - Low-velocity-impact KW - Thermoplastics KW - Ultrasonic Analysis Y1 - 2019 U6 - https://doi.org/10.4028/www.scientific.net/KEM.809.9 SN - 1662-9795 VL - 809 SP - 9 EP - 14 PB - Trans Tech Publications ER - TY - CHAP A1 - Siegl, Marco A1 - Rieger, David A1 - Kovárík, Tomáš A1 - Ehrlich, Ingo T1 - Long-Term Behavior of Thermoplastics under UV Light tested by a self-build Device T2 - 3. OTH-Clusterkonferenz, 13. April 2018, Weiden, Tagungsband; Festschrift, 5 Jahre OTH-Verbund N2 - This article presents first results of artificial aging experi-ments by ultraviolet (UV) irradiation on thermoplasticmaterials conducted as an intent of the research project Thermoplastic Composite Structures (TheCoS) in colla-boration of the Ostbayerische Technische Hochschule(OTH) Regensburg and the University of West Bohemia(UWB) in Pilsen as part of a cross-border cooperation. In technical applications, thermoplastic materials are oftenaffected by aging and a related deterioration of the mechanical properties. Therefore, it is necessary to identifythe aging behavior of thermoplastic materials. For this,experiments were performed for three thermoplasticmaterials, namely polypropylene (PP), ultra high mole -cular weight polyethylene (UHMWPE) and high impactstrength polystyrene (HIPS). For these experiments, a UV chamber was constructed according to the internationalstandard EN ISO 4892-3 for simulation of exposurebehind window glass. The results are evaluated by testing the flexural strength and the dynamic mechanicalresponse after a selected period of time under UV lightand then compared to untreated test specimens. Y1 - 2018 UR - https://www.oth-regensburg.de/fileadmin/media/forschung/Dateien_2018/Clusterkonferenz-Tagungsband-2018.pdf SP - 118 EP - 122 ER - TY - CHAP A1 - Valentino, Piergiorgio A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Furgiuele, Franco A1 - Gebbeken, Norbert ED - Iacovello, F. ED - Risitano, G. ED - Susmel, L. T1 - Mechanical characterization of basalt fibre reinforced plastic with different fabric reinforcements – Tensile tests and FE-calculations with representative volume elements (RVEs) T2 - Acta Fracturae - XXll Convegno Nazionale IGF (Italiano Gruppo Frattura) N2 - This paper describes the results of tensile tests and finite element (FE) calculations with representative volume elements (RVEs) of basalt fibre reinforced plastic with two different types of fabric reinforcements. As fabric reinforcements show repeating ondulations of warp and fill yarn, simple mixtures laws reach their limits. That is the reason why the mesoscopic dimension, lying between the microscopic and the macroscopic dimension, has to be taken into account when a mechanical characterization of fabric reinforced composites is carried out. The aim of this work is to determine the stiffness of a fabric reinforced composite in warp and fill direction with numerical investigations. The simulations are based on FE-calculation with two different RVEs. The tensile tests and the FE-calculations have been carried out for two different types of basalt fabrics, namely twill 2/2 and twill 1/3. The comparison between the experimental data and the results of the FE-calculations are provided in order to support the validity of the proposed model. Y1 - 2013 UR - http://www.gruppofrattura.it/pdf/convegni/22/IGFXXII/index.html#/242/ ER - TY - CHAP A1 - Seppenhauser, P. ED - Mottok, Jürgen ED - Reichenberger, Marcus T1 - Examinations of the Printer Head Prototype for UV Resins with Continous Fiber-Reinforcement T2 - Applied Research Conference 2019 - ARC 2019, 8 July 2019, Regensburg KW - 3D-Druck KW - Druckkopf KW - Kunstharz KW - Faserverstärkter Kunststoff Y1 - 2019 SN - 978-3-96409-182-6 SP - 241 EP - 248 PB - Pro Business GmbH CY - Berlin ER - TY - JOUR A1 - Micklitz, Matthias A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - The influence of ondulations in fabric reinforced layers on the damping properties of fibre-reinforced plastics JF - Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 SP - 306 EP - 310 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Niebauer, M. A1 - Schmid, Vinzent A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Scharfenberg, J. ED - Ziemann, Olaf T1 - Failure Criteria of Adhesively Bonded Joints BT - A Review T2 - Applied Research Conference 2015 - ARC 2015, Nürnberg, 3rd July 2015 - 16. Juli 2015 Y1 - 2015 SN - 978-3863869458 SP - 347 EP - 351 PB - Pro Business Verlag CY - Berlin ER - TY - CHAP A1 - Nonn, Aida A1 - Erdelen-Peppler, Marion A1 - Kalwa, Christoph T1 - Numerical and experimental investigation of the influence of HAZ on the fracture behavior of longitudinal welded linepipes T2 - 18th European Conference on Fracture, Fracture of Materials and Structures from Micro to Macro Scale, Dresden, Germany N2 - The present paper deals with the influence of heat affected zone (henceforth HAZ) on the fracture performance of longitudinal welded linepipes in dependence on constraint level. It has been shown that toughness values of HAZ obtained from standard fracture mechanics tests lead to uneconomic linepipe design for two reasons. The first reason is that laboratory specimens with higher constraint level generally exhibit lower fracture resistance compared to flawed linepipes. The second one has to do with a higher probability of cleavage failure occurrence in the laboratory specimen than in the linepipes due to larger areas of lower toughness (so called local brittle zones (LBZ)) intersected by crack front. In recent years numerous studies have been initiated with the objective to quantify the constraint level and thus to allow for less conservative linepipe safety assessment by applying constraint corrected toughness values. However, the main focus of these studies has hitherto been on the homogeneous materials, failing to account for the possible effects of different microstructures within the heterogeneous HAZ. This paper seeks to close this gap by reporting on results from tests on fracture mechanics specimens of a high strength X80 steel, i.e. SENB and SENT specimens as well as results from ring expansion tests. Both, deep and shallow cracks are inserted in the fracture mechanics specimens and rings targeting the fusion line (FL). By varying the initial crack size and sample type, different constraint levels are achieved and subsequently quantified using numerical methods. Besides constraint observations, post metallographic analyses are performed to identify exact HAZ microstructure involved at the crack tip. Finally, the influence of HAZ properties, flaw size and geometry on the failure behaviour of the linepipes has been demonstrated and assessed. Based on the combination of the results from constraint studies and the post metallographic analyses, the methodology is proposed which enables simple quantitative prediction of toughness values for safe and economic design of linepipes with flaws located in HAZ. KW - X80 KW - HAZ KW - constraint analysis KW - linepipe safety KW - LSAW linepipe KW - local brittle zones KW - finite element modeling Y1 - 2010 UR - https://www.gruppofrattura.it/ocs/index.php/esis/ECF18/paper/viewFile/6273/2143 ER - TY - CHAP A1 - Schneider, Ingo A1 - Nonn, Aida A1 - Völling, Alexander A1 - Mondry, A. A1 - Kalwa, Christoph T1 - A damage mechanics based evaluation of dynamic fracture resistance in gas pipelines T2 - Procedia Materials Science, Volume 3 N2 - Investigation of running ductile fracture in gas transmission pipelines and the derivation of reliable crack arrest prediction methods belong to major topics in pipeline research. The yet available crack arrest criterion, known as the Battelle Two-Curve Method (BTCM), leads to reliable predictions up to grade X70 line pipe steels for which it has been validated. This includes specific limits in terms of mechanical properties, pressure and geometry. The application of this criterion to modern pipeline steels, i.e. especially grades X80 and beyond in combination with larger diameters and high pressure, has led to mispredictions of the BTCM. Hence, in order to ensure safe design of pipelines, new methods are required based on in depth knowledge and appropriate characterization of material resistance. This paper presents a procedure for the assessment of dynamic ductile fracture resistance based on combined experimental and numerical investigations. The procedure involves quasi-static and dynamic drop- weight tear testing (DWTT) on modified specimens with pre-fatigued crack for grades X65, X80 and X100 materials, and the application of cohesive zone (CZ) and Gurson-Tveergard-Needleman (GTN) models to describe ductile material damage. The damage model parameters are calibrated on basis of DWTT results and subsequently used to simulate dynamic crack propagation in a pipeline. The influence of material properties (strain hardening, toughness), pipe geometry, usage factor and decompression behaviour on ductile fracture propagation behaviour is studied and evaluated. The results will contribute to an enhanced understanding of major parameters controlling ductile fracture propagation and will help to establish a reliable procedure for safe design of new high-capacity pipelines with regard to crack arrest. KW - Pipeline KW - Dynamic ductile fracture KW - Crack arrest KW - Cohesive zone model KW - DWT testing Y1 - 2014 U6 - https://doi.org/10.1016/j.mspro.2014.06.315 VL - 3 SP - 1956 EP - 1964 ER - TY - CHAP A1 - Kofiani, Kirki A1 - Nonn, Aida A1 - Wierzbicki, Tomasz A1 - Kalwa, Christoph A1 - Walters, Carey T1 - Experiments and fracture modeling of high-strength pipelines for high and low stress triaxiality T2 - 22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece, June 2012 N2 - This paper provides results from a comprehensive study on mechanical characterization of high-strength pipeline steel, grade X100 using experimental and numerical methods. The material was characterized for anisotropic plasticity, fracture initiation for various states of stress, (pre-cracked) fracture toughness and uncracked ductility. The experimental program included tests on flat butterfly-shaped, central hole, notched and circular disk specimens for low stress triaxiality levels; as well as tests on round notched bar specimens and SENT fracture mechanics tests, for high values of stress triaxiality. This program covered a wide range of stress conditions and demonstrated its effect on the material resistance. Parallel to the experimental study, detailed numerical investigations were carried out to simulate all different experimental tests. Using an inverse method, a 3-parameter calibration was performed on the Modified Mohr-Coulomb (MMC) fracture model. Subsequently, the predictive capabilities of the MMC were evaluated by the comparison to the fracture toughness tests results, used extensively in the pipeline industry. The capabilities of the MIT fracture model have been demonstrated on an example of high strength offshore steel, X100. The outcome of this study was not only to provide, the overall characterization of the fracture behavior of this material as an example, but also to present the methodology on how to use the MMC model as a practical tool in pipeline design. Y1 - 2012 ER - TY - JOUR A1 - Dinnebier, Heinrich A1 - Ehrlich, Ingo T1 - The effects of severe temperature changes and high humidity on porous CFRP JF - Journal of Achievements in Materials and Manufacturing Engineering (JAMME) N2 - Purpose: A route to manufacture porous carbon fiber reinforced plastic (CFRP) for study purposes is described. Design/methodology/approach: The porous CFRP is characterized using standard techniques such as matrix digestion as well as the more sophisticated method of high resolution Microfocus X-Ray Tomography (μCT). A comparison of the results of those methods is presented. The mass gains of specimens with a wide range of porosity have been measured both in constant humidity and in alternating environments. Findings: It could be shown that severe temperature changes can temporarily increase the moisture content of porous CFRP. However, after the return to a constant environment, the moisture content returns back to saturation levels. Furthermore, it could be shown by X-Ray Tomography that even under severe climatic conditions no permanent liquid water condensates inside the pores. Research limitations/implications: Using Microfocus Computed Tomography it could be shown that even after nearly a year under hot-wet conditions and more than 150 severe temperature cycles there is no liquid water detectable inside the pores. Originality/value: In this paper the effects of severe temperature changes and high humidity on porous CFRP. Y1 - 2014 VL - 67 IS - 1 SP - 14 EP - 20 ER - TY - RPRT A1 - Eisenried, Michael A1 - Romano, Marco A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Herstellung von unidirektional verstärkten Prepregs im Labormaßstab – Einfluss von Fertigungsparametern auf die Materialqualität T2 - Forschungsbericht 2013 / Ostbayerische Technische Hochschule Regensburg Y1 - 2013 UR - https://doi.org/10.35096/othr/pub-799 SP - 51 EP - 52 CY - Regensburg ER - TY - THES A1 - Ehrlich, Ingo T1 - Impactverhalten schwach gekrümmter Strukturen aus faserverstärkten Kunststoffen Y1 - 2004 UR - https://d-nb.info/973886102/34 CY - München ER - TY - JOUR A1 - Bode, J. A1 - Ehrlich, Ingo T1 - Entwicklung eines finiten Elements für Sandwichanwendungen JF - Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM), Journal of Applied Mathematics and Mechanics Y1 - 1997 VL - 77 IS - 1 SP - 41 EP - 42 ER - TY - JOUR A1 - Romano, Marco A1 - Hoinkes, Carl J. J. A1 - Ehrlich, Ingo A1 - Höcherl, Johannes A1 - Gebbeken, Norbert T1 - Experimental investigation of energy dissipation properties of fibre reinforced plastics with hybrid layups under high-velocity impact loads JF - Journal of Achievements in Materials and Manufacturing Engineering (JAMME) N2 - Purpose: The present work deals with the experimental investigation concerning the energy dissipation capacity of different kinds of reinforcement fibres in monolithic and hybrid layups under high velocity impact loads. The investigated kinds of fibres are carbon, glass and basalt. Design/methodology/approach: The test panels have been impregnated with thermoset resin. Curing was done by autoclave processing. In order to obtain comparable fibre volume contents of approx. 60 % in the different layups (monolithic and hybrid without and with separating layer), curing cycles adapted to the type of layup have been identified. The resulting fibre volume content of the test panels has been determined both by weighing and experimentally by chemical extraction and calcination. The impact load was applied by an instrumented experimental setup. Thereby both commercially available bullets and bearing balls accelerated with weighted propellant in a sabot have been used as impactors. The measured values are the velocities of the bearing balls as the impactor before and after penetration of the test panels. Findings: In both cases the results show the energy dissipation capacity of each single kind of fibre in case of the monolithic layups as well as the enhanced properties of the hybrid stacked layups without and with the separating layer as a core material. Typical failure modes on the impact surface and on the outlet areas are identified. Research limitations/implications: The influence of the respective kind of impactors, namely bullets and bearing balls, on the evaluated results is identified. Thereby the bearing balls exhibited a higher degree of reproducibility due to several reasons. Originality/value: Fibre reinforced plastics with hybrid stacking sequences can be used as load-bearing structures and at the same time as safety structures for passengers in automotive or aerospace applications. Moreover, with the hybrid stacked composites lightweight concepts can efficiently be realized regarding energy saving issues. Y1 - 2014 VL - 64 IS - 1 SP - 14 EP - 20 ER - TY - JOUR A1 - Siegl, Marco A1 - Ehrlich, Ingo T1 - Transformation of the Mechanical Properties of Fiber-Reinforced Plastic Tubes from the Cartesian Coordinate System into the Cylindrical Coordinate System for the Application of Bending Models JF - Athens Journal of Technology & Engineering N2 - Fiber-reinforced plastic (FRP) tubes are used in many different industries, such as electrical engineering and pipeline construction. The tubes are frequently subjected to bending loads, depending on the application. In order that the dimensioning of the tubes can be ensured, analytical bending models are used to calculate the resulting stresses, strains and displacements in the individual layers of the laminate. This enables the making of a statement about the failure of the fiber-reinforced tube by choosing an appropriate failure criterion. For the use of these bending models, it is necessary to understand the respective underlying theory. The theory provides the basis for the mathematical description of the mechanical properties for a single-layered tube and using the relationships between the stresses and strains that occur in the Cylindrical coordinate system for this calculation step. For this reason, a redefinition of the compliance matrix from the transformation about the winding angle to the Cylindrical coordinate system and a modification of the stress and strain vectors is necessary, because the defined Cartesian coordinate system of the model cannot be used for wounded FRP tubes. The transformation causes an exchange of entries in the compliance matrix, which remain in the correct relationship between the particular stress and strains. This step is not specified and may lead to incorrect results due to the incorrect entry of compliances. The present publication refers to sketch on this issue and represent a simplification of the changeover to the level required by the bending models notation of vectors in the form of a permutation. In addition, a new name for the pre-acquisition of the redefined compliances is given to prevent confusion when entering the material law of a bending model. Finally, the permuted and redefined compliances are proved in an example to determine their accuracy. KW - Bending model KW - Cylindrical coordinate system KW - Fiber-reinforced plastic tubes KW - Permutation of the compliances KW - Transformation of the compliances Y1 - 2017 UR - https://www.athensjournals.gr/technology/2017-4-1-4-Siegl.pdf VL - 4 IS - 1 SP - 47 EP - 62 ER - TY - JOUR A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Parametric characterization of a mesomechanic kinematic in plain and twill weave 2/2 reinforced composites by FE-calculations JF - Archives of Materials Science and Engineering (ArchivesMSE) N2 - Purpose: A parametric characterization of a mesomechanic kinematic caused by ondulation in fabric reinforced composites is investigated by numerical investigations. Design/methodology/approach: Due to the definition of plain representative sequences of balanced plain-weave and twill-weave 2/2 fabric reinforced single layers based on sines the variable geometric parameters are the amplitude and the length of the ondulation. Findings: The mesomechanic kinematic can be observed in the FE analyses for both kinds of fabric constructions. Research limitations/implications: The FE analyses consider elasticity and contraction due to Poisson effects, respectively, of the model under selected longitudinal strains. Practical implications: The results are evaluated at relevant positions on the centre-line of the ondulated warp-yarn of the plain representative model. A direct and linear coupling in case of the transversal kinematic behaviour, and thereby a corresponding definite reduction of the evaluated longitudinal strains in terms of the difference of the applied and determined longitudinal strains is identified. Originality/value: Both characteristic purely kinematic reactions due to geometric constraints directly depend on the introduced degree of ondulation. This non-dimensional parameter relates amplitude and length of one complete ondulation, and thus represents the intensity of the ondulation of the respective fabric construction. Y1 - 2019 U6 - https://doi.org/10.5604/01.3001.0013.2869 SN - 1897-2764 VL - 97 IS - 1-2 SP - 20 EP - 38 PB - Index Copernicus ER - TY - JOUR A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Structural mechanic material damping in fabric reinforced composites BT - a review JF - Archives of Materials Science and Engineering (ArchivesMSE) N2 - Purpose: A review regarding the acting mechanisms of structural dynamic material damping in fabric reinforced composites is presented. Design/methodology/approach: Mechanical acting principles identified by different investigations are considered. Aspects of the determination and calculation of structural mechanical material properties of fabric reinforced composites are described. Approaches intending the description and classification of ondulations in fabrics reinforced single layers are demonstrated. Findings: The mesomechanic geometry of fabrics is not considered sufficiently by relatively simple homogenization approaches. Yet, it significantly affects its structural dynamic material properties, especially the dynamic ones. Research limitations/implications: In each case the different damping mechanisms act coupled and occur at the same time. Therefore a separation procedure is required in any case. Practical implications: Against the background of the comparison and remarks of the presented papers a reasonable further procedure is recommended. Thereby, FE-calculations with a parametrical variation of the mesomechanic geometry in order to identify kinematic correlations due to geometric constraints are suggested. Originality/value: The idea of the representation of the geometric conditions in terms of a degree of ondulation is described. Such a non-dimensional specific value representing the intensity of the ondulation would enable the comparability of the results of different kinds of investigations. Y1 - 2017 U6 - https://doi.org/10.5604/01.3001.0010.7747 VL - 88 IS - 1 SP - 12 EP - 41 ER - TY - JOUR A1 - Valentino, Piergiorgio A1 - Sgambitterra, Emanuele A1 - Furgiuele, Franco A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Mechanical characterization of basalt woven fabric composites BT - numerical and experimental investigation JF - Frattura ed Integrità Strutturale (Fracture and Structural Integrity) N2 - Basalt fabric composite, with different twill wave reinforcements, i.e. twill 2/2 and twill 1/3, have been studied in this work by means of experimental tests and numerical finite element (FE) simulations. As fabric reinforcements show repeating undulations of warp and fill yarn, simple mixtures law cannot be applied. As a consequence, the mesoscopic scale, lying between the microscopic and the macroscopic one, has to be taken into account to mechanically characterize a fabric reinforced composite. The aim of this work is to evaluate the stiffness of a fabric reinforced composite in warp and fill direction. In particular a numerical FE model, assuming elliptical sections and sinusoidal shape of the yarns, has been implemented and experimental tests have been carried out in order to validate the proposed model. Finally, the strength and the failure modes le orientation, have been experimentally investigated. Y1 - 2014 U6 - https://doi.org/10.3221/IGF-ESIS.28.01 VL - 8 IS - 28 SP - 1 EP - 11 ER - TY - JOUR A1 - Romano, Marco A1 - Hoinkes, Carl J. J. A1 - Ehrlich, Ingo A1 - Höcherl, Johannes A1 - Gebbeken, Norbert T1 - Experimental investigation of fibre reinforced plastics with hybrid layups under high-velocity impact loads JF - Frattura ed Integrità Strutturale (Fracture and Structural Integrity) N2 - This paper deals with experimental investigations concerning energy dissipation capacity of different kinds of reinforcement fibres in monolithic and hybrid layups under high-velocity impact loads. The investigated kinds of fibres are carbon, glass and basalt fibres. Therefore test panels, using the same thermoset resin, were built up and cured by autoclave processing. The fibre volume content of the test panels has been determined. Furthermore the influence of a separating layer at selected positions in the hybrid stacked panels was investigated. The results show the influence and the energy dissipation capacity of each single kind of fibre and the enhanced properties for the hybrid layups by hybrid stacking sequences and the use of a separating core material. Y1 - 2014 U6 - https://doi.org/10.3221/IGF-ESIS.29.34 VL - 8 IS - 29 SP - 384 EP - 398 ER - TY - RPRT A1 - Putzer, Michael A1 - Rasmussen, John A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert A1 - Dendorfer, Sebastian ED - Baier, Wolfgang T1 - Muskuloskelettale Simulation zur Untersuchung des Einflusses geometrischer Parameter der Wirbelkörper auf die Belastung der Lendenwirbelsäule T2 - Forschungsbericht 2013 / Ostbayerische Technische Hochschule Regensburg Y1 - 2013 UR - https://doi.org/10.35096/othr/pub-799 SP - 60 EP - 61 CY - Regensburg ER - TY - JOUR A1 - Wiesent, Lisa A1 - Spear, Ashley A1 - Nonn, Aida T1 - Computational analysis of the effects of geometric irregularities on the interaction of an additively manufactured 316L stainless steel stent and a coronary artery JF - Journal of the Mechanical Behavior of Biomedical Materials N2 - Customized additively manufactured (laser powder bed fused (L-PBF)) stents could improve the treatment of complex lesions by enhancing stent-artery conformity. However, geometric irregularities inherent for L-PBF stents are expected to influence not only their mechanical behavior but also their interaction with the artery. In this study, the influence of geometrical irregularities on stent-artery interaction is evaluated within a numerical framework. Thus, computed arterial stresses induced by a reconstructed L-PBF stent model are compared to those induced by the intended stent model (also representing a stent geometry obtained from conventional manufacturing processes) and a modified CAD stent model that accounts for the increased strut thickness inherent for L-PBF stents. It was found that, similar to conventionally manufactured stents, arterial stresses are initially related to the basic stent design/topology, with the highest stresses occurring at the indentations of the stent struts. Compared to the stent CAD model, the L-PBF stent induces distinctly higher and more maximum volume stresses within the plaque and the arterial wall. In return, the modified CAD model overestimates the arterial stresses induced by the L-PBF stent due to its homogeneously increased strut thickness and thus its homogeneously increased geometric stiffness compared with the L-PBF stent. Therefore, the L-PBF-induced geometric irregularities must be explicitly considered when evaluating the L-PBF stent-induced stresses because the intended stent CAD model underestimates the arterial stresses, whereas the modified CAD model overestimates them. The arterial stresses induced by the L-PBF stent were still within the range of values reported for conventional stents in literature, suggesting that the use of L-PBF stents is conceivable in principle. However, because geometric irregularities, such as protruding features from the stent surface, could potentially damage the artery or lead to premature stent failure, further improvement of L-PBF stents is essential. KW - Laser powder bed fusion (L-PBF) KW - Cardiovascular stents KW - Finite element analysis (FEA) KW - Geometrical imperfections KW - Stent-artery interaction Y1 - 2022 U6 - https://doi.org/10.1016/j.jmbbm.2021.104878 SN - 1751-6161 VL - 125 PB - Elsevier ER - TY - CHAP A1 - Xue, Lufeng A1 - Paredes, Marcelo A1 - Nonn, Aida A1 - Wierzbicki, Tomasz T1 - Modeling of Crack Propagation in Defective X100 Line Pipes T2 - ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering: August 3-7, 2020, virtual, online N2 - A comprehensive experimental program is carried out to determine material parameters for fracture initiation and propagation in X100 pipeline steels. The quadratic Hill’48 yield function along with an isotropic hardening are used to describe plastic flow at large deformation and a phenomenological fracture criterion to predict fracture initiation. Fracture mechanics SENT specimens are used to calibrate post-initiation softening parameters necessary for ductile crack propagation in thick components. Once the material model parameters set is complete a final comparison is conducted with ring expansion test on same material. KW - Berg KW - Bruchmechanik KW - Pipeline KW - plastisches Fließen KW - Rissausbreitung KW - Versuchsprogramm KW - Werkstoffmodell KW - Werkstoffparameter Y1 - 2020 SN - 978-0-7918-8434-8 U6 - https://doi.org/10.1115/OMAE2020-18048 PB - American Society of Mechanical Engineers CY - New York ER - TY - JOUR A1 - Wiesent, Lisa A1 - Stocker, Felix A1 - Nonn, Aida T1 - Investigating the influence of geometric parameters on the deformation of laser powder bed fused stents using low-fidelity thermo-mechanical analysis JF - Materialia N2 - Maintaining dimensional accuracy is a major challenge of laser powder bed fusion (L-PBF) preventing its application for more complex and filigree L-PBF structures in industrial practice. Previous studies have shown that residual stresses and distortion of benchmark L-PBF components may be predicted by sequential thermo-mechanical analyses. However, the reliability of these analyses for more complex structures must be critically questioned, as comprehensive validation and sensitivity analyses are scarce. In this paper, we present a calibrated and validated low-fidelity sequential thermo-mechanical finite element analysis (FEA) of a tubular L-PBF lattice structure, i.e., an aortic stent, where pronounced local deformation is expected. As a first step, the finite element model was extensively calibrated using experimental data to ensure reproducibility of the simulation results. Thereupon, geometric features critical to the distortion of L-PBF lattice structures and measures to compensate for the distortion, such as inversion of the distorted L-PBF structure, were investigated. It was found that the distortion of the L-PBF lattice structures can be reduced, but not completely prevented, by increasing the strut angles, increasing the strut thickness, and decreasing the transition radius in the area of merging struts. FEA-based inversion of the numerically predicted deformed structure minimized distortion, resulting in the L-PBF aortic stent approximating the intended CAD geometry even with a small strut thickness. This work shows that low-fidelity sequential thermo-mechanical FEA can be used not only for the analysis and deformation compensation of reference structures, but also for the analysis of more complex filigree structures with pronounced local deformation. Y1 - 2023 U6 - https://doi.org/10.1016/j.mtla.2023.101774 VL - 28 PB - Elsevier ER - TY - JOUR A1 - Nonn, Aida A1 - Kiss, Bálint A1 - Pezeshkian, Weria A1 - Tancogne-Dejean, Thomas A1 - Cerrone, Albert R. A1 - Kellermayer, Miklos A1 - Bai, Yuanli A1 - Li, Wei A1 - Wierzbicki, Tomasz T1 - Inferring mechanical properties of the SARS-CoV-2 virus particle with nano-indentation tests and numerical simulations JF - Journal of the mechanical behavior of biomedical materials N2 - The pandemic caused by the SARS-CoV-2 virus has claimed more than 6.5 million lives worldwide. This global challenge has led to accelerated development of highly effective vaccines tied to their ability to elicit a sustained immune response. While numerous studies have focused primarily on the spike (S) protein, less is known about the interior of the virus. Here we propose a methodology that combines several experimental and simulation techniques to elucidate the internal structure and mechanical properties of the SARS-CoV-2 virus. The mechanical response of the virus was analyzed by nanoindentation tests using a novel flat indenter and evaluated in comparison to a conventional sharp tip indentation. The elastic properties of the viral membrane were estimated by analytical solutions, molecular dynamics (MD) simulations on a membrane patch and by a 3D Finite Element (FE)-beam model of the virion's spike protein and membrane molecular structure. The FE-based inverse engineering approach provided a reasonable reproduction of the mechanical response of the virus from the sharp tip indentation and was successfully verified against the flat tip indentation results. The elastic modulus of the viral membrane was estimated in the range of 7-20 MPa. MD simulations showed that the presence of proteins significantly reduces the fracture strength of the membrane patch. However, FE simulations revealed an overall high fracture strength of the virus, with a mechanical behavior similar to the highly ductile behavior of engineering metallic materials. The failure mechanics of the membrane during sharp tip indentation includes progressive damage combined with localized collapse of the membrane due to severe bending. Furthermore, the results support the hypothesis of a close association of the long membrane proteins (M) with membrane-bound hexagonally packed ribonucleoproteins (RNPs). Beyond improved understanding of coronavirus structure, the present findings offer a knowledge base for the development of novel prevention and treatment methods that are independent of the immune system. Y1 - 2023 U6 - https://doi.org/10.1016/j.jmbbm.2023.106153 SN - 1751-6161 VL - 148 PB - Elsevier ER - TY - JOUR A1 - Cerrone, Albert R. A1 - Nonn, Aida A1 - Hochhalter, Jacob D. A1 - Bomarito, Geoffrey F. A1 - Warner, J. E. A1 - Carter, Bruce J. T1 - Predicting failure of the Second Sandia Fracture Challenge geometry with a real-world, time constrained, over-the-counter methodology JF - International Journal of Fracture N2 - An over-the-counter methodology to predict fracture initiation and propagation in the challenge specimen of the Second Sandia Fracture Challenge is detailed herein. This pragmatic approach mimics that of an engineer subjected to real-world time constraints and unquantified uncertainty. First, during the blind prediction phase of the challenge, flow and failure locus curves were calibrated for Ti–6Al–4V with provided tensile and shear test data for slow (0.0254 mm/s) and fast (25.4 mm/s) loading rates. Thereafter, these models were applied to a 3D finite-element mesh of the non-standardized challenge geometry with nominal dimensions to predict, among other items, crack path and specimen response. After the blind predictions were submitted to Sandia National Labs, they were improved upon by addressing anisotropic yielding, damage initiation under shear dominance, and boundary condition selection. KW - Ti–6Al–4V KW - Failure locus curve KW - Sandia Fracture Challenge KW - Anisotropic yielding Y1 - 2016 U6 - https://doi.org/10.1007/s10704-016-0086-x VL - 198 IS - 1-2 SP - 117 EP - 126 ER - TY - CHAP A1 - Romano, Marco A1 - Hoinkes, Carl J. J. A1 - Ehrlich, Ingo A1 - Höcherl, Johannes A1 - Gebbeken, Norbert ED - Meran, C. T1 - Influence of the impactor on the experimentally determined energy dissipation properties of fiber-reinforced plastics with hybrid layups under high velocity impact loads T2 - Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014 Y1 - 2014 SP - 650 EP - 664 ER - TY - CHAP A1 - Hoinkes, Carl J. J. A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Höcherl, Johannes A1 - Gebbeken, Norbert ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - Investigation of fibre reinforced plastics with monolithic and hybrid stacking sequences under high-velocity impact loads T2 - Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 PB - Shaker CY - Aachen ER - TY - JOUR A1 - Cerrone, Albert R. A1 - Wawrzynek, Paul A1 - Nonn, Aida A1 - Paulino, Glaucio H. A1 - Ingraffea, Anthony R. T1 - Implementation and verification of the Park–Paulino–Roesler cohesive zone model in 3D JF - Engineering Fracture Mechanics N2 - The Park–Paulino–Roesler (PPR) potential-based model is a cohesive constitutive model formulated to be consistent under a high degree of mode-mixity. Herein, the PPR’s generalization to three-dimensions is detailed, its implementation in a finite element framework is discussed, and its use in single-core and high performance computing (HPC) applications is demonstrated. The PPR model is shown to be an effective constitutive model to account for crack nucleation and propagation in a variety of applications including adhesives, composites, linepipe steel, and microstructures. KW - Cohesive zone modeling KW - Cohesive element KW - Intergranular fracture KW - Finite element analysis KW - PPR potential-based model Y1 - 2014 U6 - https://doi.org/10.1016/j.engfracmech.2014.03.010 VL - 120 SP - 26 EP - 42 ER - TY - CHAP A1 - Eisenried, Michael A1 - Romano, Marco A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Ziemann, Olaf ED - Bogner, Werner ED - Mottok, Jürgen T1 - Influence of parameters of the production process on the material quality of unidirectionally reinforced prepregs T2 - Applied Research Conference 2013, ARC 2013 ; 17th and 18th October 2013, Deggendorf Y1 - 2013 SP - 70 EP - 75 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Lindner, Matthias A1 - Berndt, Dominik A1 - Tschurtschenthal, Karl A1 - Ehrlich, Ingo A1 - Jungbauer, Bastian A1 - Schreiner, Rupert A1 - Pipa, Andrei V. A1 - Hink, Rüdiger A1 - Foest, Rüdiger A1 - Brandenburg, Ronny A1 - Neuwirth, Daniel A1 - Karpen, Norbert A1 - Bonaccurso, Elmar A1 - Weichwald, Robert A1 - Max, Alexander A1 - Caspari, Ralf T1 - Aircraft Icing Mitigation by DBD-based Micro Plasma Actuators T2 - AIAA AVIATION 2020 FORUM: June 15-19, 2020 N2 - We present the application of plasma actuators as a technology for ice prevention at airfoils. The miniaturized dielectric barrier discharge (DBD) plasma actuators (PA) were fabricated by means of microelectromechanical systems (MEMS). We elucidate how to make the actuator samples scalable and applicable to any desired shape by the use of flexible inorganic zirconia substrates. For this purpose, we applied our developed embedding method to integrate the micro actuators in modern carbon/glass fiber reinforced polymer (CFRP/GFRP) materials. Next, the embedded actuator samples were mounted on a mechanical air profile-like fixture and placed in the icing wind tunnel iCORE. The samples were tested in rime ice conditions at temperatures of -15 to -20° C and air speeds up to 30 m/s. Unlike other groups we used a thin film zirconia substrate as dielectric for the plasma actuator. Due to the low substrate thickness of just 150 µm, an operating voltage of 2 kVRMS is already sufficient enough for a stable plasma formation. The experiments show that the operated actuator was able to prevent the ice formation and first indications of a De-icing function were also found. Hence, we show that it is feasible to realize an anti-icing system with zirconia-based plasma actuators operated at lower voltages compared to conventional ones. Y1 - 2020 U6 - https://doi.org/10.2514/6.2020-3243 ER - TY - CHAP A1 - Lindner, Matthias A1 - Berndt, Dominik A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Schreiner, Rupert A1 - Pipa, Andrei V. A1 - Hink, Rüdiger A1 - Foest, Rüdiger A1 - Brandenburg, Ronny A1 - Max, Alexander A1 - Caspari, Ralf T1 - Fabrication, surface integration and testing of miniaturized dielectric barrier discharge plasma actuators for active flow control applications T2 - AIAA Aviation 2019 Forum, 17-21 June 2019, Dallas, Texas Y1 - 2019 U6 - https://doi.org/10.2514/6.2019-2998 ER - TY - CHAP A1 - Niedernhuber, Michal A1 - Ehrlich, Ingo A1 - Holtmannspötter, Jens ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - Fiber-Oriented Repair of Fiber Reinforced Plastics: Investigations on Tensile Specimens T2 - 4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 SP - 298 EP - 302 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Pongratz, Christian A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Stolle, Reinhard T1 - Structural Dynamic Analysis of Thin Composite Plates Using Noncontact Measurement and Excitation T2 - Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016 Y1 - 2016 SN - 978-3-86460-494-2 SP - 351 EP - 358 PB - Pro Business Verlag CY - Berlin ER - TY - RPRT A1 - Pongratz, Christian A1 - Ehrlich, Ingo ED - Baier, Wolfgang T1 - DampSIM: Lebensdauerüberwachung von faserverstärkten Kunststoffen auf Basis der strukurdynamischen Werkstoffdämpfung T2 - Forschungsbericht 2017 / Ostbayerische Technische Hochschule Regensburg Y1 - 2017 UR - https://doi.org/10.35096/othr/pub-1383 SN - 978-3-9818209-3-5 SP - 62 EP - 63 ER - TY - RPRT A1 - Pongratz, Christian A1 - Ehrlich, Ingo ED - Baier, Wolfgang T1 - High-End-Strukturen für den Leichtbau – mit faserverstärktem 3D-Druck T2 - Forschung 2018 / Ostbayerische Technische Hochschule Regensburg Y1 - 2018 UR - https://doi.org/10.35096/othr/pub-1382 SN - 978-3-9818209-4-2 SP - 64 EP - 65 ER - TY - GEN A1 - Judenmann, Anna A1 - Pongratz, Christian A1 - Ehrlich, Ingo A1 - Höfer, Philipp A1 - Holtmannspötter, Jens T1 - Additive Fertigung von endlosfaserverstärkten Kunststoffstrukturen T2 - Münchner Leichtbauseminar 2022, 26. October 2022, 16. November 2022, 30 November 2022, Munich/Neubiberg/Garching N2 - Additive Fertigung hat sich in zahlreichen industriellen Anwendungen etabliert und bildet eine wichtige Schlüsseltechnologie. Im Gegensatz zu metallischen Werkstoffen, haben additiv gefertigte Bauteile aus Kunststoffen geringere Festigkeit und Steifigkeit, sodass sich ihre Verwendung als lasttragende Strukturen schwierig gestaltet. Insbesondere der Einsatz von endlosen Verstärkungsfasern kann die mechanischen Eigenschaften additiv gefertigter Strukturen signifikant verbessern und die Fertigung hochbelastbarer Faserverbundstrukturen im 3D-Druckverfahren ermöglichen. Daher gilt es aktuell notwendige Anlagen und Prozessketten für den Fertigungsprozess aber auch Vorgehensweisen für die belastungsoptimierte Auslegung der Faserverläufe innerhalb des Bauteils zu entwickeln, um so das Themengebiet „Endlosfaserverstärkter 3D-Druck“ weiter voranzutreiben. Für mehr räumliche Freiheit bei der Positionierung der Druckbahnen können industrieroboterbasierte Systeme eingesetzt werden, um so das Potenzial gerichteter Bauweise von Faserverbundstrukturen auch im additiven Fertigungsprozess vollumfänglich ausschöpfen zu können. Dabei ermöglicht ihr Einsatz auch eine räumliche Ablage der Faserverstärkung, wobei für die Materialablage ein geeigneter 3D-Druckkopf erforderlich ist. Für die Implementierung der Faserverstärkung ist zudem eine dem Lastfall entsprechende Auslegung des Bauteils sowie die Ermittlung einer sinnvollen Faserpositionierung innerhalb des Bauteils erforderlich, wobei unterschiedliche Variablen aus den Bereichen Material, Struktur und Fertigungsprozess berücksichtigt werden müssen. Im Rahmen des Vortrages werden die Herausforderungen der Technologieentwicklung des endlosfaserverstärkten 3D-Drucks aufgegriffen sowie auf eine belastungsorientierte Faserpositionierung näher eingegangen. Aktuelle Erkenntnisse werden diskutiert sowie eine Entwurfsmethodik für die Prozesspfadgenerierung vorgeschlagen. KW - additive manufacturing KW - continuous fiber KW - composites KW - toolpath Y1 - 2022 ER - TY - JOUR A1 - Niedernhuber, Michal A1 - Holtmannspötter, Jens A1 - Ehrlich, Ingo T1 - Fiber-oriented repair geometries for composite materials JF - Composites, Part B N2 - In this paper, the idea of fiber-oriented repair geometries for carbon fiber reinforced plastics (CFRP) is investigated. It considers the differing mechanical properties of unidirectional fiber reinforced material by excluding overlapping regions perpendicular to the fiber direction of the particular layer. A mechanical and numerical comparison of tensile strength of stepped joints with continuous step lengths per ply and stepped joints with reduced step lengths in plies with fiber orientation differing from load direction is performed. Finite element simulations show similar shear stresses. Mechanical tests of CFRP laminates with stepped joints show no significant deviation in tensile strength, in spite of a joint length reduction of nearly 40%. This leads to the possibility of a significant reduction of repair area. Y1 - 2016 U6 - https://doi.org/10.1016/j.compositesb.2016.03.027 VL - 94 SP - 327 EP - 337 ER - TY - JOUR A1 - Pongratz, Christian A1 - Schlamp, Matthias A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Petratos, P. A1 - Mourtos, N. T1 - Detection of Delamination Damages in Thin Composite Plates using Noncontact Measurement of Structural Dynamic Behavior JF - Athens Journal of Technology & Engineering Y1 - 2016 U6 - https://doi.org/10.30958/AJTE.3-4-3 VL - 3 IS - 4 SP - 315 EP - 331 ER - TY - JOUR A1 - Xue, Lufeng A1 - Keim, Vincent A1 - Paredes, Marcelo A1 - Nonn, Aida A1 - Wierzbicki, Tomasz T1 - Anisotropic effects on crack propagation in pressurized line pipes under running ductile fracture scenarios JF - Engineering fracture mechanics N2 - The current analyses present results of running ductile fracture propagation in high strength X100 line pipe steels under the influence of anisotropy. Mechanical anisotropy is commonly available in pipe products as a result of the manufacturing process, especially, those subjected to hot/cold-worked deformation. The outcomes of the present analyses show that its effect on the behavior of running ductile fracture in cracked pipes undergoing depressurization is meaningful. For instance, the Crack-Tip Opening Angle (CTOA) not only exhibits a strong dependence to the pipe's diameter size, but also to the material's anisotropy nature when compared to a hypothetical isotropic material. Moreover, laboratory scale tests such as those performed on Battelle Drop Weight Tear (BDWT) samples provide useful information about initiation of ductile crack propagation when the anisotropy features are taken into account in the material description. KW - BEHAVIOR KW - Fracture anisotropy KW - INITIATION KW - MODEL KW - Non-associated flow rule KW - PREDICTION KW - Rate dependent MMC Model KW - Running ductile fracture KW - STATE KW - STEEL KW - STRAIN-RATE KW - TOUGHNESS Y1 - 2021 U6 - https://doi.org/10.1016/j.engfracmech.2021.107748 VL - 249 PB - Elsevier ER - TY - PAT A1 - Olbrich, Florian A1 - Pongratz, Christian A1 - Bierl, Rudolf A1 - Ehrlich, Ingo T1 - Method and System for Evaluating a Structural Integrity of an Aerial Vehicle Y1 - 2024 ER - TY - CHAP A1 - Nonn, Aida A1 - Marx, P. T1 - Validated Multiphysics Modeling For Advanced Pipeline Integrity Management T2 - ADIPEC, November 4–7, 2024, Abu Dhabi, UAE N2 - The aim of this paper is to present practical steps for utilizing a validated multiphysics approach for fracture control in CO2 pipelines within the framework of Carbon Capture Transport and Storage (CCTS). Ensuring the arrest of running ductile fracture (RDF) is a crucial safety requirement for the transportation of dense-phase CO2. However, current standards rely on outdated and restrictive methods, imposing severe limitations on pipeline material and structural design. As a result, projects that fall outside these standards face the need for extremely costly tests, often leading to delays or cancellations of CCTS initiatives. This study introduces an advanced, validated, fully-coupled fluid-structure interaction (FSI) model designed to accurately predict fracture propagation in CO2 pipelines. A key advantage of this approach is its use of robust and reproducible calibration and validation procedures combined with high-quality material characterization data. The full coupling of structural, fluid, and backfill models is essential for obtaining precise results, not only in determining arrest occurrence but also in analyzing properties such as fracture velocity history, 3D pressure distributions behind the propagating crack, wall thinning, and crack tip opening angle. The FSI model has demonstrated its value as a cost-effective tool for safety assessments, enabling the development of fracture control plans that specify minimum required material properties and fluid compositions for optimized pipeline design, both onshore and offshore. Additionally, performing virtual studies with the parameterized FSI model enables the generation of synthetic data for training and validating a machine learning surrogate model. This surrogate model can be integrated into industrial practices, facilitating the application of multiphysics modeling without the need for extensive expertise. Y1 - 2024 U6 - https://doi.org/10.2118/222279-MS ER - TY - GEN A1 - Schimmer, Florian A1 - Gebhardt, Jakob A1 - Motsch-Eichmann, N. A1 - Hausmann, Joachim M. A1 - Ehrlich, Ingo T1 - The effect of curvature on the low-velocity impact resistance of CF/PEEK laminates T2 - 30 Years IVW Anniversary Colloquium, Leibnitz-Institut für Verbundwerkstoffe Kaiserslautern, 2021 Y1 - 2021 ER - TY - JOUR A1 - Afanasev, Anna A1 - Höfer, Philipp A1 - Holtmannspötter, Jens A1 - Zimmer, Felix A1 - Ehrlich, Ingo T1 - Development of a continuous fiber-reinforced 3D printing process with a 6-axis robot arm: Process design and equipment JF - The International Journal of Advanced Manufacturing Technology N2 - The utilisation of 3D printing processes in the fabrication of continuous fiber-reinforced composites confers a multitude of advantages, in particular flexible design based on structural requirements. In order to achieve greater flexibility, there is a necessity for 3D printing systems that allow for customisable material selection and fiber positioning. This paper presents the design of a robot-based 3D printing system that incorporates an in-situ impregnation line and flexibility regarding the machine code generation for fiber positioning. The development of the system enabled the attainment of an average fiber volume content of up to 37.12%. In the tensile tests, material characteristics up to E1 = 24.7 GPa and strength of up to RM1 = 0.51 GPa were determined. Y1 - 2026 U6 - https://doi.org/10.1007/s00170-025-17263-3 SN - 0268-3768 N1 - Corresponding author der OTH Regensburg: Anna Afanasev PB - Springer ER - TY - JOUR A1 - Qiao, Yu A1 - Grad, Marius A1 - Nonn, Aida T1 - Toward an Efficient and Robust Process–Structure Prediction Framework for Filigree L-PBF 316L Stainless Steel Structures JF - Metals N2 - Additive manufacturing (AM), particularly laser powder bed fusion (L-PBF), provides unmatched design flexibility for creating intricate steel structures with minimal post-processing. However, adopting L-PBF for high-performance applications is difficult due to the challenge of predicting microstructure evolution. This is because the process is sensitive to many parameters and has a complex thermal history. Thin-walled geometries present an added challenge because their dimensions often approach the scale of individual grains. Thus, microstructure becomes a critical factor in the overall integrity of the component. This study focuses on applying cellular automata (CA) modeling to establish robust and efficient process–structure relationships in L-PBF of 316L stainless steel. The CA framework simulates solidification-driven grain evolution and texture development across various processing conditions. Model predictions are evaluated against experimental electron backscatter diffraction (EBSD) data, with additional quantitative comparisons based on texture and morphology metrics. The results demonstrate that CA simulations calibrated with relevant process parameters can effectively reproduce key microstructural features, including grain size distributions, aspect ratios, and texture components, observed in thin-walled L-PBF structures. This work highlights the strengths and limitations of CA-based modeling and supports its role in reliably designing and optimizing complex L-PBF components. Y1 - 2025 U6 - https://doi.org/10.3390/met15070812 SN - 2075-4701 VL - 15 IS - 7 PB - MDPI ER -