TY - CHAP A1 - Höng, Simon A1 - Eder, Friedrich T1 - Methode zur Generierung multimodalersynthetischer Daten aus parametrischen BIM-Modellen zur Nutzung in KI-Systemen T2 - Tagungsband 34. Forum Bauinformatik, 06. - 08.09.2023, Bochum N2 - Für die erfolgreiche Implementierung von KI-Systemen ist eine große Menge an relevanten (und gelabelten) Trainingsdaten nötig. Die Datenqualität, Format, Struktur und nicht zuletzt urheberrechtliche Belange schränken die unmittelbare Nutzung vorhandener Daten ein und hindern die gewinnbringende Nutzung dieser Technologien in der Praxis. In diesem Beitrag wird ein Ansatz vorgestellt, der auf Basis einer parametrischen bzw. regelbasierten Erstellung von BIM-Modellen synthetische, gelabelte Trainingsdaten für die nachgelagerte Nutzung in diversen KI-Workflows generiert. Die Modelle werden mithilfe einer C#-Anwendung über die API von Autodesk Revit erzeugt und können durch automatisiertes Postprocessing mittels Python zu annotierten Daten in gängigen Austauschformaten aufbereitet werden. Die synthetischen Bauwerksmodelle ermöglichen die Ableitung multimodaler Trainings-Datensätze. Das heißt, sie können in unterschiedlichen Dateiformaten vorgehalten werden. Dadurch lassen sich Datensätze erzeugen, die auf den jeweiligen Anwendungsfall zugeschnitten sind (z. B.: Rastergrafiken, Punktwolken, CAD- oder BIM-Formate). Die Daten lassen sich somit in entsprechende KI-Systeme integrieren. Dieser Lösungsansatz wird am Anwendungsbeispiel einer KI-gestützten Objektklassifizierung in 2D-Plänen auf Basis synthetischer Datensätze im COCO-Format durchgeführt. Die künstlich erzeugten Plandaten in Anlehnung an Positionspläne von rasterförmig aufgebauten Skelettbauwerken konnten erfolgreich einem KI-System als Trainingsdaten zugeführt werden. Damit wird die nahtlose Verkettung der einzelnen Prozessschritte (Modellierung, Annotation, Integration) validiert. Die Ergebnisse werden abschließend evaluiert und Optimierungsansätze diskutiert. KW - AI KW - Machine Learning KW - Computer Vision KW - Synthetic Data KW - BIM Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:294-101306 SP - 398 EP - 405 ER - TY - JOUR A1 - Lindner, Matthias A1 - Pipa, Andrei V. A1 - Karpen, Norbert A1 - Hink, Rüdiger A1 - Berndt, Dominik A1 - Foest, Rüdiger A1 - Bonaccurso, Elmar A1 - Weichwald, Robert A1 - Friedberger, Alois A1 - Caspari, Ralf A1 - Brandenburg, Ronny A1 - Schreiner, Rupert T1 - Icing Mitigation by MEMS-Fabricated Surface Dielectric Barrier Discharge JF - Applied Sciences N2 - Avoiding ice accumulation on aerodynamic components is of enormous importance to flight safety. Novel approaches utilizing surface dielectric barrier discharges (SDBDs) are expected to be more efficient and effective than conventional solutions for preventing ice accretion on aerodynamic components. In this work, the realization of SDBDs based on thin-film substrates by means of micro-electro-mechanical-systems (MEMS) technology is presented. The anti-icing performance of the MEMS SDBDs is presented and compared to SDBDs manufactured by printed circuit board (PCB) technology. It was observed that the 35 mu m thick electrodes of the PCB SDBDs favor surface icing with an initial accumulation of supercooled water droplets at the electrode impact edges. This effect was not observed for 0.3 mu m thick MEMS-fabricated electrodes indicating a clear advantage for MEMS-technology SDBDs for anti-icing applications. Titanium was identified as the most suitable material for MEMS electrodes. In addition, an optimization of the MEMS-SDBDs with respect to the dielectric materials as well as SDBD design is discussed. KW - aerospace engineering KW - anti-icing KW - DBD PLASMA ACTUATORS KW - EXCITATION KW - FLOW-CONTROL KW - low-temperature plasma KW - MEMS KW - SEPARATION CONTROL KW - SDBD Y1 - 2021 U6 - https://doi.org/10.3390/app112311106 N1 - Corresponding author: Matthias Lindner VL - 11 IS - 23 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Gamisch, Bernd A1 - Huber, Lea A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - On the Kinetic Mechanisms of the Reduction and Oxidation Reactions of Iron Oxide/Iron Pellets for a Hydrogen Storage Process JF - Energies N2 - This work aims at investigating the kinetic mechanisms of the reduction/oxidation (redox) reactions of iron oxide/iron pellets under different operating conditions. The reaction principle is the basis of a thermochemical hydrogen storage system. To simulate the charging phase, a single pellet consisting of iron oxide (90% Fe2O3, 10% stabilising cement) is reduced with different hydrogen (H2) concentrations at temperatures between 600 and 800 °C. The discharge phase is initiated by the oxidation of the previously reduced pellet by water vapour (H2O) at different concentrations in the same temperature range. In both reactions, nitrogen (N2) is used as a carrier gas. The redox reactions have been experimentally measured in a thermogravimetric analyser (TGA) at a flow rate of 250 mL/min. An extensive literature review has been conducted on the existing reactions’ kinetic mechanisms along with their applicability to describe the obtained results. It turned out that the measured kinetic results can be excellently described with the so-called shrinking core model. Using the geometrical contracting sphere reaction mechanism model, the concentration- and temperature-dependent reduction and oxidation rates can be reproduced with a maximum deviation of less than 5%. In contrast to the reduction process, the temperature has a smaller effect on the oxidation reaction kinetics, which is attributed to 71% less activation energy (Ea,Re=56.9 kJ/mol versus Ea,Ox=16.0 kJ/mol). The concentration of the reacting gas showed, however, an opposite trend: namely, to have an almost twofold impact on the oxidation reaction rate constant compared to the reduction rate constant. Y1 - 2022 U6 - https://doi.org/10.3390/en15218322 N1 - Corresponding author: Belal Dawoud VL - 15 IS - 21 PB - MDPI ER - TY - JOUR A1 - Marzani, Giulia A1 - Tondelli, Simona A1 - Kuma, Yuko A1 - Cruz Rios, Fernanda A1 - Hu, Rongbo A1 - Bock, Thomas A1 - Linner, Thomas T1 - Embedding Circular Economy in the Construction Sector Policy Framework: Experiences from EU, U.S., and Japan for Better Future Cities JF - Smart Cities N2 - The transition towards a Circular Economy (CE) in the construction sector is essential to achieving sustainable, inclusive smart cities. This study examines the integration of CE principles into construction policies across four key global contexts: the European Union (focusing on Italy and Germany), the United States, and Japan. Through a comparative policy analysis, the research identifies best practices, implementation barriers, and the role of digitalization in advancing CE strategies. In Europe, CE is embedded in policy frameworks such as the Green Deal and the New Circular Economy Action Plan, driving the shift toward sustainable urban development. The United States, while in the early stages of CE adoption, is fostering circular initiatives at local levels, particularly in waste management and building deconstruction. Japan’s policy landscape integrates CE within a broader strategy for resource efficiency, emphasizing technological innovation. The findings highlight the necessity of a research-driven approach to inform policies that leverage digital tools, such as Building Information Modeling and Digital Product Passports, to enhance material traceability and urban circularity. This study contributes to the global effort of designing smart cities that are not only technologically advanced but also environmentally and socially sustainable through the adoption of CE principles in the built environment. Y1 - 2025 U6 - https://doi.org/10.3390/smartcities8020048 VL - 8 IS - 2 PB - MDPI ER - TY - JOUR A1 - Lovšin, Matija A1 - Brandl, Dominik A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Cmok, Luka A1 - Coga, Lucija A1 - Kalin, Mitjan A1 - Shamonin (Chamonine), Mikhail A1 - Drevenšek‐Olenik, Irena T1 - Reconfigurable Surface Micropatterns Based on the Magnetic Field-Induced Shape Memory Effect in Magnetoactive Elastomers JF - Polymers N2 - A surface relief grating with a period of 30 mu m is embossed onto the surface of magnetoactive elastomer (MAE) samples in the presence of a moderate magnetic field of about 180 mT. The grating, which is represented as a set of parallel stripes with two different amplitude reflectivity coefficients, is detected via diffraction of a laser beam in the reflection configuration. Due to the magnetic-field-induced plasticity effect, the grating persists on the MAE surface for at least 90 h if the magnetic field remains present. When the magnetic field is removed, the diffraction efficiency vanishes in a few minutes. The described effect is much more pronounced in MAE samples with larger content of iron filler (80 wt%) than in the samples with lower content of iron filler (70 wt%). A simple theoretical model is proposed to describe the observed dependence of the diffraction efficiency on the applied magnetic field. Possible applications of MAEs as magnetically reconfigurable diffractive optical elements are discussed. It is proposed that the described experimental method can be used as a convenient tool for investigations of the dynamics of magnetically induced plasticity of MAEs on the micrometer scale. KW - ADHESION KW - friction KW - magnetoactive elastomers KW - magnetorheological elastomer KW - optical diffraction KW - shape memory effect KW - surface microstructuring KW - TEMPERATURE Y1 - 2021 U6 - https://doi.org/10.3390/polym13244422 VL - 13 IS - 24 PB - MDPI ER - TY - JOUR A1 - Rusavy, Zdenek A1 - Cechova, Hana A1 - Dendorfer, Sebastian A1 - Kalis, Vladimir A1 - Ismail, Khaled M. T1 - Is the Finnish grip tight enough? A manometric study of two manual perineal protection techniques JF - Acta Obstetricia et Gynecologica Scandinavica Y1 - 2025 U6 - https://doi.org/10.1111/aogs.15033 VL - 104 IS - 2 SP - 423 EP - 425 PB - Wiley ER - TY - JOUR A1 - Käss, Sebastian A1 - Strahringer, Susanne A1 - Westner, Markus T1 - A Multiple Mini Case Study on the Adoption of Low Code Development Platforms in Work Systems JF - IEEE Access N2 - Although adopting Low Code Development Platforms (LCDPs) promises significant efficiency and effectiveness improvements for application development, its adoption still needs further empirical research. This paper uses a combinatorial approach to research LCDP adoption and presents the results of a multiple mini case study with 36 cases on LCDP adoption. A combination of the Socio-Technical Systems theory and the Technology-Organisational-Environment model is used as a theoretical lens. In this paper, we show that LCDP adoption is a multifaceted phenomenon and identify three archetypes for LCDP adoption (i.e., IT Resource Shortage Mitigators, Application Development Democratisers, and Synergy Realisers) and one archetype for LCDP non-adoption (i.e., Intricacy Adversaries). Each archetype can be interpreted as an individual path towards LCDP (non-)adoption. Based on these archetypes, we derive seven starting points for practitioners to adopt LCDPs in work systems. Moreover, by using the theoretical lenses, the paper shows that for an LCDP adoption to occur, an optimisation of the social and technical sub-systems is required. KW - Low Code Development Platform KW - Adoption KW - Case study Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-65634 SN - 2169-3536 N1 - Corresponding author: Markus Westner SP - 118762 EP - 118786 PB - IEEE ER - TY - JOUR A1 - Morag, Sarah A1 - Kieninger, Martin A1 - Eissnert, Christoph A1 - Auer, Simon A1 - Dendorfer, Sebastian A1 - Popp, Daniel A1 - Hoffmann, Johannes A1 - Kieninger, Bärbel T1 - Comparison of different techniques for prehospital cervical spine immobilization: Biomechanical measurements with a wireless motion capture system JF - PLOS ONE Y1 - 2023 U6 - https://doi.org/10.1371/journal.pone.0292300 VL - 18 IS - 11 SP - 1 EP - 14 PB - PLOS CY - San Francisco, California ER - TY - JOUR A1 - Kriegl, Raphael A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Čoga, Lucija A1 - Drevenšek‐Olenik, Irena A1 - Jezeršek, Matija A1 - Kalin, Mitjan A1 - Shamonin (Chamonine), Mikhail T1 - Microstructured Magnetoactive Elastomers for Switchable Wettability JF - Polymers N2 - We demonstrate the control of wettability of non-structured and microstructured magnetoactive elastomers (MAEs) by magnetic field. The synthesized composite materials have a concentration of carbonyl iron particles of 75 wt.% (≈27 vol.%) and three different stiffnesses of the elastomer matrix. A new method of fabrication of MAE coatings on plastic substrates is presented, which allows one to enhance the response of the apparent contact angle to the magnetic field by exposing the particle-enriched side of MAEs to water. A magnetic field is not applied during crosslinking. The highest variation of the contact angle from (113 ± 1)° in zero field up to (156 ± 2)° at about 400 mT is achieved in the MAE sample with the softest matrix. Several lamellar and pillared MAE structures are fabricated by laser micromachining. The lateral dimension of surface structures is about 50 µm and the depth varies between 3 µm and 60 µm. A systematic investigation of the effects of parameters of laser processing (laser power and the number of passages of the laser beam) on the wetting behavior of these structures in the absence and presence of a magnetic field is performed. In particular, strong anisotropy of the wetting behavior of lamellar structures is observed. The results are qualitatively discussed in the framework of the Wenzel and Cassie-Baxter models. Finally, directions of further research on magnetically controlled wettability of microstructured MAE surfaces are outlined. The obtained results may be useful for the development of magnetically controlled smart surfaces for droplet-based microfluidics. Y1 - 2022 U6 - https://doi.org/10.3390/polym14183883 N1 - Corresponding authors: Raphael Kriegl und Mikhail Shamonin VL - 14 IS - 18 SP - 1 EP - 21 PB - MDPI ER - TY - JOUR A1 - Koenig, Eric A1 - Guertler, Katherine T1 - Parlaying students´ work experience into practice-oriented esp JF - Journal of teaching english for specific and academic purposes N2 - Instructors of English for Special Purposes often describe the challenge of determining which specific content and competencies to address in their courses. After all, it is the focus on technical subject matter which students expect to differentiate engineering ESP from standard EFL. Yet ESP instructors, who frequently have a background in fields such as applied linguistics or education, often receive little input from technical specialists as to which specialist topics are most relevant to their target domain. Our research indicates that ESP instructors in higher education can leverage a valuable resource to enrich teaching effectiveness: students who have already gained professional experience. As part of a longitudinal study at two universities of applied sciences (UAS) in southern Germany, engineering students at the beginning of their first semester of compulsory technical English participate in an online survey. The course participants provide relevant biographical information such as work experience and evaluate the perceived importance of a selection of skills and applications for a Technical English course. The surveys, administered in October 2016 and October 2017 and encompassing nearly 1000 respondents, provide compelling insights. Analysis reveals conclusive correlations between the perceived importance of course components and students' declared level of previous work experience. Listening comprehension, reading comprehension, process description, and test and measurement are topics whose importance correlates positively with work experience level. In addition, there are clear trends relating work experience level with the importance of the reading and writing of technical documents as well as communication and interaction. This data provides empirically-founded criteria for selecting the topics to include in the scope of a Technical English course for engineers, informed by the judgment of students with occupational experience. Additionally, recognizing that students with work experience have legitimate practitioner credibility allows instructors to identify and select relevant subject matter in concordance with experienced students' learning objectives. ESP learners will profit greatly from cultivating skills with proven practical applicability. KW - ESP curricula KW - ESP practitioners KW - Technical English KW - work experience Y1 - 2018 U6 - https://doi.org/10.22190/JTESAP1802277K VL - 6 IS - 2, Special issue SP - 277 EP - 284 PB - Universität Nis ER - TY - JOUR A1 - Lazarev, Igor A. A1 - Riabokon, P. V. A1 - Haller, M. A1 - Dendorfer, Sebastian T1 - Effect of the Displacement of Calcaneal Bone Peripheral Fragment in its Fracture on the Function of the Three-Headed Calf Muscle JF - TRAUMA N2 - In the structure of musculoskeletal injuries, calcaneal fractures account for up to 4 % of all skeletal fractures and up to 60 % of hindfoot fractures. The effect of the displacement of the peripheral fragment of the calcaneus on the calf muscles’s reaction forces at the time of the adoption of the simplified squatting position was investigated by modeling in AnyBody Modeling System 6.0 software. M.gastrocnemius (lateralis et medialis) in the initial phase of motion in all variants of the peripheral fragment displacement did not develop sufficient muscular effort in comparison to the intact calcaneus. M.soleus medialis et lateralis showed significant increase in muscle activity rates in the initial phase of motion (41.87 ± 1.90 H and 52.07 ± 2.10 H) before reaching its maximum values, as compared with those of the intact calcaneus. In the final phase of the movement, upon muscle reaches its maximum length, muscular strength indicators of the m.soleus returned to their original values or were significantly below them. The decline in muscle strength was due to shortening of the moment arm or muscle excursion in case of convergence of muscle attachment points. When the peripheral fragment is displaced, due to putting down the heel to the surface of the support in terms of anatomical muscle lengthening, it takes extra effort to achieve rest length and its maximum power. In all types of the displacement of the peripheral fragment, the function of three-headed calf muscle is disturbed with involvement of additional muscular effort and energy expenditure. This fact should motivate the surgeon on the need for accurate repositioning of bone fragments in calcaneal fractures with the displacement of the peripheral fragment. Y1 - 2016 U6 - https://doi.org/10.22141/1608-1706.2.16.2015.80247 VL - 16 IS - 2 SP - 20 EP - 24 PB - Zaslavsky ER - TY - JOUR A1 - Lehrer, Tobias A1 - Stocker, Philipp A1 - Duddeck, Fabian A1 - Wagner, Marcus T1 - UCSM: Dataset of U-shaped parametric CAD geometries and real-world sheet metal meshes for deep drawing JF - Computer-aided design N2 - The development of machine learning (ML) applications in deep drawing is hindered by limited data availability and the absence of open-access benchmarks for validating novel approaches, including domain generalization over distinct geometries. This paper addresses these challenges by introducing a comprehensive U-shaped dataset tailored to this manufacturing process. Our U-Channel sheet metal (UCSM) dataset combines 90 real-world meshes with an infinite number of synthetic geometry samples generated from four parametric Computer-Aided Design (CAD) models, ensuring extensive geometry variety and data quantity. Additionally, a ready-to-use dataset for drawability assessment and segmentation is provided. Leveraging CAD and mesh data sources bridges the gap between sparse data availability and ML requirements. Our analysis demonstrates that the proposed parametric models are geometrically valid, and real-world and synthetic data complement each other effectively, providing robust support for ML model development. While the dataset is confined to U-shaped, thin-walled, deep drawing scenarios, it considerably aids in overcoming data scarcity. Thereby, it facilitates the validation and comparison of new geometry-generalizing ML methodologies in this domain. By providing this benchmark dataset, we enhance the comparability and validation of emerging methods for ML advancements in sheet metal forming. Y1 - 2025 U6 - https://doi.org/10.1016/j.cad.2025.103924 VL - 188 PB - Elsevier ER - TY - JOUR A1 - Maurer, Julia A1 - Saibold, Anna A1 - Gerl, Katharina A1 - Koller, Michael A1 - Kölbl, Oliver A1 - Pukrop, Tobias A1 - Windschuettl, Sandra A1 - Einhell, Sabine A1 - Herrmann-Johns, Anne A1 - Raptis, Georgios A1 - Mueller, Karolina T1 - Systematic development of a patient-reported ONCOlogical-ROUTinE-Screening (ONCO-ROUTES) procedure at the University Cancer Center Regensburg JF - Journal of Cancer Research and Clinical Oncology N2 - Purpose The evaluation of treatment success and progression in oncology patient-reported outcomes (PROs) is playing an increasingly important role. Meanwhile, PROs are a component of the certification requirements of the German Cancer Society for oncology centers. PROs are used to provide supportive therapy. There is currently no instrument that fully covers the requirements. At the University Hospital Regensburg (UKR), a digital ONCOlogical-ROUTinE-Screening (ONCO-ROUTES) procedure was developed in order to assess the need for supportive therapy in a standardized way and to provide patients with supportive interventions tailored to their needs. Methods On the basis of current requirements and guidelines, the development of ONCO-ROUTES was supported by experts in focus groups and interviews, and digitalization was carried out in connection with the IT infrastructure. Results A Needs-based, Quality-of-life (QoL) and Symptoms Screening (NQS2) tool already established in the routine at the UKR was further developed into ONCO-ROUTES, which is made up of the domains therapy phase, nutrition, tobacco use, alcohol use, quality of life, general condition/functional status, physical activity, psychooncology, social services, and further support needs. By linking the digitized questionnaire to the hospital information system, the results are available for immediate use in routine operations and thus for the referral of patients for further supportive therapy. Conclusion The digital PRO application ONCO-ROUTES is designed to involve patients in monitoring additional supportive needs and thus, improves supportive interdisciplinary treatment. Y1 - 2024 U6 - https://doi.org/10.1007/s00432-024-05955-4 SN - 1432-1335 VL - 150 IS - 9 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Lehrer, Tobias A1 - Kaps, Arne A1 - Lepenies, Ingolf A1 - Raponi, Elena A1 - Wagner, Marcus A1 - Duddeck, Fabian T1 - Complementing Drawability Assessment of Deep-Drawn Components with Surrogate-Based Global Sensitivity Analysis JF - ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering N2 - In the early-stage development of sheet metal parts, key design properties of new structures must be specified. As these decisions are made under significant uncertainty regarding drawing configuration changes, they sometimes result in the development of new parts that, at a later design stage, will not be drawable. As a result, there is a need to increase the certainty of experience-driven drawing configuration decisions. Complementing this process with a global sensitivity analysis can provide insight into the impact of various changes in drawing configurations on drawability, unveiling cost-effective strategies to ensure the drawability of new parts. However, when quantitative global sensitivity approaches, such as Sobol's method, are utilized, the computational requirements for obtaining Sobol indices can become prohibitive even for small application problems. To circumvent computational limitations, we evaluate the applicability of different surrogate models engaged in computing global design variable sensitivities for the drawability assessment of a deep-drawn component. Here, we show in an exemplary application problem, that both a standard kriging model and an ensemble model can provide commendable results at a fraction of the computational cost. Moreover, we compare our surrogate models to existing approaches in the field. Furthermore, we show that the error introduced by the surrogate models is of the same order of magnitude as that from the choice of drawability measure. In consequence, our surrogate models can improve the cost-effective development of a component in the early design phase. KW - sheet metal forming KW - deep drawing KW - global sensitivity analysis KW - variance-based sensitivity analysis KW - metamodeling Y1 - 2024 U6 - https://doi.org/10.1115/1.4065143 SN - 2332-9025 SP - 1 EP - 10 PB - ASME ER - TY - CHAP A1 - Ettl, Katrin A1 - Greiner, Nina A1 - Kudienko, Natalie A1 - Lauer, Norina A1 - Lichtenauer, Norbert A1 - Meussling-Sentpali, Annette A1 - Mohr, Christa A1 - Pfingsten, Andrea ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Meussling-Sentpali, Annette ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - Forschungsdesign Pflege und Therapie im Projekt TePUS T2 - Digitale Technik für ambulante Pflege und Therapie: Herausforderungen, Lösungen, Anwendungen und Forschungsperspektiven N2 - Beim Projekt DeinHaus 4.0 Oberpfalz – TePUS (Telepräsenzroboter für die Pflege und Unterstützung von Schlaganfallpatientinnen und -patienten) handelt es sich um eine Längsschnittstudie im Mixed-Methods-Design zur Untersuchung telepräsenz und appgestützter Angebote aus den Bereichen Pflege, Logopädie und Physiotherapie. T3 - Schriftenreihe der OTH Regensburg - 1 KW - Pflege KW - Logopädie KW - Physiotherapie KW - Schlaganfall KW - Digitalisierung KW - Ambulante Pflege KW - Ambulante Therapie KW - Roboter Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55448 SN - 978-3-83766235-1 SP - 59 EP - 78 PB - transcript CY - Bielefeld ER - TY - CHAP A1 - Ettl, Katrin A1 - Lichtenauer, Norbert A1 - Mohr, Christa ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Meussling-Sentpali, Annette ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - Telenursing bei Schlaganfall BT - Auswahl existierender Software und Apps aus pflegewissenschaftlicher Sicht für das Projekt DeinHaus 4.0 Oberpfalz T2 - Digitale Technik für ambulante Pflege und Therapie: Herausforderungen, Lösungen, Anwendungen und Forschungsperspektiven N2 - Schlaganfallbetroffene haben oft einen komplexen Unterstützungsbedarf. Der Artikel beschäftigt sich damit, welche Telenursing-Anwendungen für das Projekt DeinHaus 4.0 ausgewählt wurden, um Schlaganfallbetroffene dabei zu unterstützen selbstbestimmt zu Hause zu leben. T3 - Schriftenreihe der OTH Regensburg - 1 KW - Pflege KW - Digitalisierung KW - Telenursing KW - Schlaganfall KW - Apps KW - Roboter KW - ambulante Pflege Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55458 SN - 978-3-8394-6235-5 SN - 978-3-83766235-1 SP - 79 EP - 95 PB - transcript CY - Bielefeld ER - TY - CHAP A1 - Pfingsten, Andrea A1 - Schedel, Valentin A1 - Michel, Natalie ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - Physiotherapeutische Tele-Intervention – Machbarkeit und funktionelle Veränderungen bei Schlaganfallbetroffenen T2 - Digitale Technik für ambulante Pflege und Therapie III N2 - Dieser Artikel untersucht die Machbarkeit und Wirksamkeit einer physiotherapeutischen Tele-Intervention bei Schlaganfallpatient*innen. Die prospektive, nicht kontrollierte Interventionsstudie basiert auf einem Mixed-Methods-Design und analysiert funktionelle Veränderungen sowie die Lebensqualität der Teilnehmenden vor und nach der Intervention. Eingeschlossen wurden postakute und chronische Schlaganfallpatient*innen mit stabilen Krankheitsbildern, die in ihrem häuslichen Umfeld lebten. Die Intervention bestand aus videobasierten Einzelsitzungen und einer optionalen Gruppenintervention, die Physiotherapie und Logopädie kombinierte. Die Ergebnisse zeigten signifikante Verbesserungen in der Arm-Hand-Funktion und der Teilhabefähigkeit. Die Teletherapie erwies sich als eine praktikable Ergänzung zur traditionellen Rehabilitation, insbesondere in ländlichen Regionen, und förderte die Autonomie und das aktive Engagement der Patient*innen in ihrem Genesungsprozess. Die Studie belegt das Potenzial teletherapeutischer Maßnahmen zur Überbrückung von Versorgungslücken und zur Sicherstellung einer kontinuierlichen, hochfrequenten Rehabilitation. T3 - Regensburger Beiträge zur Digitalisierung des Gesundheitswesens - 4 KW - Schlaganfall KW - Physikalische Therapie KW - Telemedizin KW - Lebensqualität KW - Teilhabe KW - Arm-Hand-Funktion KW - Mixed-Methods-Design Y1 - 2024 SN - 978-3-8394-6728-2 U6 - https://doi.org/10.14361/9783839467282-007 SP - 125 PB - transcript CY - Bielefeld ER - TY - CHAP A1 - Lichtenauer, Norbert A1 - Meussling-Sentpali, Annette ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Meussling-Sentpali, Annette ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - Telenursing-Interventionen bei Schlaganfall BT - Überblick über den Forschungsstand T2 - Digitale Technik für ambulante Pflege und Therapie: Herausforderungen, Lösungen, Anwendungen und Forschungsperspektiven N2 - Systematische Literatursuche zum Einsatz von Telenursing-Interventionen bei Schlaganfallpatientinnen und Schlaganfallpatienten. T3 - Schriftenreihe der OTH Regensburg - 1 KW - Digitalisierung KW - Telemedizin KW - Schlaganfall KW - Pflege KW - Telenursing KW - Interventionen KW - Schlaganfall KW - Review Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55175 SN - 978-3-8376-6235-1 SP - 97 EP - 118 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Ławrowski, Robert Damian A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Dams, Florian A1 - Schreiner, Rupert T1 - Improvement of Homogenity and Aspect Ratio of Silicon Tips for Field Emission by Reactive-Ion Etching JF - Advances in materials science and engineering N2 - The homogeneity of emitters is very important for the performance of field emission (FE) devices. Reactive-ion etching (RIE) and oxidation have significant influences on the geometry of silicon tips. The RIE influences mainly the anisotropy of the emitters. Pressure has a strong impact on the anisotropic factor. Reducing the pressure results in a higher anisotropy, but the etch rate is also lower. A longer time of etching compensates this effect. Furthermore an improvement of homogeneity was observed. The impact of uprating is quite low for the anisotropic factor, but significant for the homogeneity. At low power the height and undercut of the emitters are more constant over the whole wafer. The oxidation itself is very homogeneous and has no observable effect on further variation of the homogeneity. This modified fabrication process allows solving the problem of inhomogeneity of previous field emission arrays. Y1 - 2014 U6 - https://doi.org/10.1155/2014/948708 VL - 2014 PB - Hindawi ER - TY - JOUR A1 - Wagner, Maria Stella A1 - Kranz, Michael A1 - Krenkel, Lars A1 - Pointner, Daniel A1 - Foltan, Maik A1 - Lubnow, Matthias A1 - Lehle, Karla ED - Becatti, Matteo T1 - Computer based visualization of clot structures in extracorporeal membrane oxygenation and histological clot investigations for understanding thrombosis in membrane lungs JF - Frontiers in Medicine N2 - Extracorporeal membrane oxygenation (ECMO) was established as a treatment for severe cardiac or respiratory disease. Intra-device clot formation is a common risk. This is based on complex coagulation phenomena which are not yet sufficiently understood. The objective was the development and validation of a methodology to capture the key properties of clots deposed in membrane lungs (MLs), such as clot size, distribution, burden, and composition. One end-oftherapy PLS ML was examined. Clot detection was performed using multidetector computed tomography (MDCT), microcomputed tomography (μCT), and photography of fiber mats (fiber mat imaging, FMI). Histological staining was conducted for von Willebrand factor (vWF), platelets (CD42b, CD62P), fibrin, and nucleated cells (4′, 6-diamidino-2-phenylindole, DAPI). The three imaging methods showed similar clot distribution inside the ML. Independent of the imaging method, clot loading was detected predominantly in the inlet chamber of the ML. The μCT had the highest accuracy. However, it was more expensive and time consuming than MDCT or FMI. The MDCT detected the clots with low scanning time. Due to its lower resolution, it only showed clotted areas but not the exact shape of clot structures. FMI represented the simplest variant, requiring little effort and resources. FMI allowed clot localization and calculation of clot volume. Histological evaluation indicated omnipresent immunological deposits throughout the ML. Visually clot-free areas were covered with leukocytes and platelets forming platelet-leukocyte aggregates (PLAs). Cells were embedded in vWF cobwebs, while vWF fibers were negligible. In conclusion, the presented methodology allowed adequate clot identification and histological classification of possible thrombosis markers such as PLAs. KW - ECMO KW - membrane lung KW - µCT KW - MDCT KW - shear induced clotting KW - vWF KW - histological evaluation Y1 - 2024 U6 - https://doi.org/10.3389/fmed.2024.1416319 IS - 11 PB - Frontiers ER - TY - GEN ED - Barton, Thomas ED - Herrmann, Frank ED - Meister, Vera G. ED - Müller, Christian ED - Seel, Christian T1 - Angewandte Forschung in der Wirtschaftsinformatik: Prozesse, Technologien, Anwendungen, Systeme und Management BT - Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2785 PB - mana-Buch CY - Heide ER - TY - JOUR A1 - Kurfess, Christina A1 - Corsten, Sabine A1 - Nickel, Maren A1 - Knieriemen, Marie A1 - Kreiter, Daniel A1 - Lauer, Norina T1 - Peer-to-peer support: digital networking in aphasia to improve quality of life (PeerPAL) JF - Frontiers in Communication N2 - Background: People with aphasia (PWA) often suffer from reduced participation and quality of life. Nevertheless, there are currently only a few specific interventions that respond to this problem. Participation and quality of life could be increased by interacting with peers who have similar experiences. Digital social networks could stimulate an autonomous interaction. However, digital social networks need to be adapted to the specific needs of PWA. Therefore, a participatory, agile process involving the target group should be chosen to develop such a olution, i.e., an app. The research project consists of a total of three phases. In the first phase—app development—the app was developed and programmed including the target group. In the second phase—app testing—the usability and user-friendliness of the app were evaluated with four PWA. In the third phase—feasibility and preliminary effcacy—that will be described in the article, the impact of the app on PWA will be evaluated. Aims: The overarching aim of our study is to provide preliminary effcacy of the intervention. Digital social interaction with other PWA can lead to increased social integration. In addition to digital interaction, personal encounters between PWA should be encouraged. As a result, we expect an improvement in quality of life of PWA. Additionally, we focus on identification of the most appropriate measurements to discover changes associated with the intervention. Methods: The evaluation, which is described in this paper, takes place in a pre-test - post-test design with a total of n = 48 PWA. Participants will be recruited in regional clusters to facilitate face-to-face meetings. Half of the participants will be assigned to the delayed intervention group and the other half to the immediate intervention group. Participants in the delayed intervention group will go through a 3-month waiting period before using the app, while the participants of the immediate intervention group will start using the app for 3 months right away. Inclusion criteria are the presence of chronic aphasia (at least 6 months) and possession of a smartphone with internet access. Questionnaires on quality of life (SAQOL-39, GHQ-12), depression (GDS, DISCs), communicative participation (CPIB), and social support (F-SozU) will be conducted at inclusion (t0), after 3 months of app use (t1), and after another 3 months for follow-up (t2). Participants in the delayed intervention group will be assessed twice before the intervention, before the 3-month waiting period (t0a) and after the waiting period (t0b). In addition to the quantitative measures, interviews will take place with 6 to 8 selected participants after 3 months of app use. Responses will be analysed using Thematic Analysis. Discussion: The app will be the first social network tool that is systematically developed with PWA. Initial indications from the first phases are that the app can be used by PWA, so that the evaluation of this app version can take place in the third phase. Results of this study can provide an initial indication of whether social network support is a suitable intervention. Findings will help provide information on the feasibility of digital connectivity for PWA. Preliminary findings on its impact on the participation and quality of life of PWA could be made available. KW - Aphasie KW - Partizipation KW - Lebensqualität KW - Soziales Netzwerk KW - peer-to-peer support Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-64881 VL - 8 PB - Frontiers Media S.A. ER - TY - JOUR A1 - Liebetruth, Thomas T1 - Sustainability in Performance Measurement and Management Systems for Supply Chains JF - Procedia Engineering N2 - Aspects of sustainability – understood as the ability to manage economic, social and environmental performance at the same time – are becoming more important in Supply Chain Management. This is a challenge as sustainability adds less quantifiable aspects to Supply Chain Management than classic process aspects. On the other side measuring sustainability is crucial for the implementation of modern Supply Chains Management and to manage sustainably in the daily business. This contribution discusses the integration of sustainability in performance measurement and management systems (PMMS) for Supply Chain Management. Therefore in the paper firstly an overview of definitions and developments in performance measurement and management systems and a structure for PMMS are given. Secondly guidelines for good and modern PMMS are discussed. Thirdly existing approaches for Supply Chain Management PMMS (e. g. KPIs, TCO, value driver trees and balanced scorecards and maturity assessments) are presented and the suitability for Supply Chain Management as well as the possibility to integrate aspects of sustainability are examined. Lastly the fulfilment of the requirements and the ability to cope with the challenges of the approaches is discussed. Y1 - 2017 U6 - https://doi.org/10.1016/j.proeng.2017.06.093 SN - 1877-7058 VL - 192 SP - 539 EP - 544 PB - Elsevier ER - TY - CHAP A1 - Karamara, Merve A1 - Bogdanski, Moritz-Ole A1 - Zöller, Raphael A1 - Albrecht, Sophie Viktoria A1 - Linner, Thomas A1 - Bock, Thomas A1 - Braml, Thomas T1 - Increasing efficiency and sustainability: A comparative analysis of concrete 3D printing and traditional methods based on case studies T2 - MATEC Web of Conferences N2 - At the forthcoming Concrete Solutions 2025 conference, the subject of concrete 3D printing will be explored in the “Case Studies” category, with a comparison to traditional methods. Concrete 3D printing offers several significant advantages, including the ability to create complex geometries, increased material efficiency, faster build times and cost savings. These are particularly important in the context of the current skilled labour shortage and emphasis on resource efficiency in construction. Nevertheless, challenges persist in the areas of machine reliability, process integration, and material adaptation to meet the requirements of 3D printing. The case studies will present modular and design-engineering-based strategies for the development of efficient, scalable automation solutions that integrate 3D printing into existing processes and allow for project-specific customisation through selective automation. These findings provide a robust framework for industrial applications that enhance efficiency and adaptability. By comparing concrete 3D printing to conventional methods, the insights offer a foundation for advancing automated production in construction, promoting scalable, resource-efficient, and economically sustainable practices that address the industry’s evolving demands. Y1 - 2025 U6 - https://doi.org/10.1051/matecconf/202540913005 N1 - Corresponding author der OTH Regensburg: Merve Karamara VL - 409 PB - EDP Sciences ER - TY - JOUR A1 - Franke, Markus A1 - Wagner, Marcus A1 - Krause, Tom Janis T1 - Data-driven model order reduction with surrogate elements for transient simulations JF - Engineering Computations : International journal for computer-aided engineering and software N2 - Purpose – The purpose of this study is to introduce surrogate elements for static and transient finite element simulations. These elements are designed to replace regions of several conventional solid elements with a single artificial element that possesses a reduced number of degrees of freedoms (dofs). A notable advantage of our surrogate elements is their seamless integration into standard finite element meshes. Design/methodology/approach – The construction of the surrogate elements stiffness and mass matrices is achieved through an optimization process wherein displacements serve as the optimization objective. Moreover, the matrices are designed to possess properties analogous to those of standard finite elements. A particular focus is placed on ensuring that the artificial stiffness matrices are positive semi-definite. Furthermore, artificial degrees of freedom are introduced. Findings – The efficacy of the proposed technique is demonstrated through its application to two different use cases. It is demonstrated that, despite being trained on examples comprising a single surrogate element, the surrogate elements can be employed multiple times within complex and practical models. The degree of accuracy achieved in these applications is noteworthy. Moreover, the proposed method is considerably faster than the fully discretized models. Originality/value – The study expands the field of substructuring and model order reduction by incorporating artificial surrogate elements built by neural networks, which enables seamless integration with standard finite element analysis via positive semi-definite matrices. Furthermore, the introduction of artificial degrees of freedom, which are detached from the computational domain, is proposed. Once trained, the surrogate elements can be utilised in load and support independent scenarios. Y1 - 2025 U6 - https://doi.org/10.1108/EC-06-2024-0511 VL - 2025 PB - Emerald Publishing CY - Leeds ER - TY - JOUR A1 - Marterer, Verena A1 - Radouchová, Michaela A1 - Soukup, Radek A1 - Hipp, Susanne A1 - Blecha, Tomáš T1 - Wearable textile antennas: investigation on material variants, fabrication methods, design and application JF - Fashion and Textiles N2 - With the ongoing miniaturization of wireless devices, the importance of wearable textiles in the antenna segment has increased significantly in recent years. Due to the widespread utilization of wireless body sensor networks for healthcare and ubiquitous applications, the design of wearable antennas offers the possibility of comprehensive monitoring, communication, and energy harvesting and storage. This article reviews a number of properties and benefits to realize comprehensive background information and application ideas for the development of lightweight, compact and low-cost wearable patch antennas. Furthermore, problems and challenges that arise are addressed. Since both electromagnetic and mechanical specifications must be fulfilled, textile and flexible antennas require an appropriate trade-off between materials, antenna topologies, and fabrication methods—depending on the intended application and environmental factors. This overview covers each of the above issues, highlighting research to date while correlating antenna topology, feeding techniques, textile materials, and contacting options for the defined application of wearable planar patch antennas. KW - Wearable communication KW - Textile antenna KW - Patch antenna KW - Design requirements KW - Smart textiles KW - E-textiles Y1 - 2024 U6 - https://doi.org/10.1186/s40691-023-00369-1 VL - 11 PB - Springer Open ER - TY - JOUR A1 - Schmidbauer, Simon A1 - Becker, Maria A1 - Haug, Sonja T1 - Online Political Participation of Refugees in Germany: Analysis of a Survey in Bavaria JF - Sage Online N2 - New media are an important resource for the political participation of marginalized groups. However, there is still a lack of knowledge about the factors that influence whether this opportunity is used. Influencing factors emerge from both the Civic Voluntarism Model and previous research on migrants’ political activity. Using data collected in 2019/2020 from 486 refugees living in Bavaria, we estimate linear probability models to investigate facilitating factors for the use of new media for political participation. The analysis shows that refugees in Germany who inform themselves about politics online tend to be predominantly male, higher educated, and politically involved. Language skills and the duration of stay also appear to be important. For the expression of one’s political opinion online, gender and language skills have an impact, but informing oneself about German politics, political interest, and offline political activity in Germany are the most relevant factors. This indicates that there is a close link between on- und offline activity. However, using the internet requires particular resources, so that people with lower language skills, for example, are particularly disadvantaged. KW - political participation KW - internet use KW - refugees KW - political online participation Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77671 N1 - Corresponding author der OTH Regensburg: Sonja Haug PB - Sage CY - Thousand Oaks ER - TY - JOUR A1 - Galan, Isabel A1 - Briendl, Lukas G. A1 - Thumann, Maria A1 - Steindl, Florian A1 - Roeck, Rudolf A1 - Kusterle, Wolfgang A1 - Mittermayr, Florian T1 - Filler Effect in Shotcrete JF - Materials N2 - The effects of fine limestone powder on the early hydration of cementitious systems accelerated by means of alkali-free aluminum sulfate based products, commonly used for shotcrete applications, were investigated in the course of laboratory and real scale tests. In binary (CEM I + limestone) and ternary (CEM I + limestone + slag) systems the addition of fine limestone led to an enhancement of the hydration degree and strength development at early times (<24 h). The formation of ettringite, aluminate hydrates, and C-S-H is affected by the joint action of the setting accelerator and the fine limestone. Accelerator and limestone, in combination with the cement, can be optimized to enhance ettringite and silicate reaction, in some cases coupled with aluminate reaction inhibition, to produce mixes suitable for sprayed concrete applications. Such optimization can help to reduce the cement content in the mixes without compromising the early strength development of the shotcrete. KW - acceleration KW - ACCELERATORS KW - ALKALI-FREE KW - ALUMINUM SULFATE KW - CaCO3 KW - CALCIUM-CARBONATE KW - CEMENT HYDRATION KW - EARLY AGE HYDRATION KW - hydration KW - LIMESTONE POWDER KW - mechanical properties KW - PORTLAND-CEMENT Y1 - 2019 U6 - https://doi.org/10.3390/ma12193221 VL - 12 IS - 19 SP - 1 EP - 24 PB - MDPI CY - Basel ER - TY - JOUR A1 - Knödler, Leonard A1 - Knoedler, Samuel A1 - Kauke-Navarro, Martin A1 - Knödler, Christoph A1 - Höfer, Simon A1 - Bächer, Helena A1 - Gassner, Ulrich M. A1 - Machens, Hans-Günther A1 - Prantl, Lukas A1 - Panayi, Adriana C. T1 - Three-dimensional Medical Printing and Associated Legal Issues in Plastic Surgery: A Scoping Review JF - Plastic & Reconstructive Surgery-Global Open N2 - Three-dimensional printing (3DP) represents an emerging field of surgery. 3DP can facilitate the plastic surgeon’s workflow, including preoperative planning, intraoperative assistance, and postoperative follow-up. The broad clinical application spectrum stands in contrast to the paucity of research on the legal framework of 3DP. This imbalance poses a potential risk for medical malpractice lawsuits. To address this knowledge gap, we aimed to summarize the current body of legal literature on medical 3DP in the US legal system. By combining the promising clinical use of 3DP with its current legal regulations, plastic surgeons can enhance patient safety and outcomes. Y1 - 2023 U6 - https://doi.org/10.1097/GOX.0000000000004965 SN - 2169-7574 VL - 11 IS - 4 PB - Wolters Kluwer ER - TY - JOUR A1 - Pangerl, Jonas A1 - Moser, Elisabeth A1 - Müller, Max A1 - Weigl, Stefan A1 - Jobst, Simon A1 - Rück, Thomas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A sub-ppbv-level Acetone and Ethanol Quantum Cascade Laser Based Photoacoustic Sensor– Characterization and Multi-Component Spectra Recording in Synthetic Breath JF - Photoacoustics N2 - Trace gas analysis in breath is challenging due to the vast number of different components. We present a highly sensitive quantum cascade laser based photoacoustic setup for breath analysis. Scanning the range between 8263 and 8270 nm with a spectral resolution of 48 pm, we are able to quantify acetone and ethanol within a typical breath matrix containing water and CO2. We photoacoustically acquired spectra within this region of mid-infra-red light and prove that those spectra do not suffer from non-spectral interferences. The purely additive behavior of a breath sample spectrum was verified by comparing it with the independently acquired single component spectra using Pearson and Spearman correlation coefficients. A previously presented simulation approach is improved and an error attribution study is presented. With a 3σ detection limit of 6.5 ppbv in terms of ethanol and 250 pptv regarding acetone, our system is among the best performing presented so far. KW - Acetone KW - Breath analysis KW - Photoacoustic spectroscopy KW - Quantum cascade laser KW - Spectral simulation Y1 - 2023 U6 - https://doi.org/10.1016/j.pacs.2023.100473 SN - 2213-5979 N1 - Corresponding author: Jonas Pangerl VL - 30 SP - 1 EP - 12 PB - Elsevier ER - TY - JOUR A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Achieving Optimal Reactive Power Compensation in Distribution Grids by Using Industrial Compensation Systems JF - Electricity N2 - This paper presents a method for integrating industrial consumers owning compensation systems as alternative reactive power sources into grid operating processes. In remuneration, they receive a market-based provision of reactive power. The aim is to analyze the potential of reactive power compensation systems of industrial companies connected to medium-voltage (10 kV–30 kV) AC grids in order to increase the reactive power ability of distribution grids. Measurement methods and reactive power potential results of six industrial companies are presented to characterize the amount and temporal availability of their reactive power potential. The presented approach for using the decentralized reactive power potential is a centralized reactive power control method and is based on optimal power flow (OPF) calculations. An optimization algorithm based on linear programming is used to coordinate a reactive power retrieval tuned to the actual demand. The influencing quantities are the current grid status (voltage and load flow capacity reserves at grid nodes and power lines) and the current reactive power potential of the reactive power sources. The compensation impact of six measured industrial companies on an exemplary medium-voltage grid is shown by an application example. KW - Blindleistung KW - Blindleistungsmanagement KW - Industriebetriebe KW - Optimal Power Flow KW - Reactive Power Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-59139 N1 - Corresponding author: Johannes Rauch VL - 4 IS - 1 SP - 78 EP - 95 PB - MDPI CY - Basel ER - TY - CHAP A1 - Pfahler, Katharina A1 - Thiel, Charlotte A1 - Neidhart, Thomas T1 - Einfluss der Probengeometrie auf die Mechanischen Eigenschaften von Stampflehm - Eine Literaturrecherche T2 - ce/papers - Proceedings in Civil Engineering N2 - Der Klimawandel lenkt den Fokus im Bauwesen zunehmend auf die Reduktion von Treibhausgasen und die Förderung nachhaltiger Materialien. Baustoffe wie Lehm gewinnen dank ihrer ökologischen und bauphysikalischen Vorteile an Bedeutung. Eine zentrale Herausforderung stellt die Definition standardisierter Prüfmethoden für Stampflehm dar. Dieser Beitrag analysiert Forschungsergebnisse zur Geometrie von Stampflehmprobekörpern mittels Literaturrecherche und vergleicht experimentelle Untersuchungen sowie relevante Normen und Testmethoden. Die Auswertung zeigt, dass äußere Einflüsse wie Mischungszusammensetzung, Verdichtungsenergie, Gesteinskörnung und Tonminerale eine zentrale Rolle spielen. Eine Vereinheitlichung von Probengeometrie, Lagerung und Prüfverfahren ist essenziell, um reproduzierbare Ergebnisse zu erzielen und die mechanischen Kennwerte von Stampflehm vergleichbar zu machen. Ziel ist es, einheitliche Standards zu entwickeln, um die Stampflehmbauweise in der Praxis zu fördern. KW - Lehmbau KW - Stampflehm KW - Stampflehm Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-80291 SN - 2509-7075 N1 - Corresponding author der OTH Regensburg: Katharina Pfahler VL - 8 IS - 1 SP - 57 EP - 68 PB - Ernst & Sohn, a Wiley Brand ER - TY - CHAP A1 - Pfingsten, Andrea ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Mohr, Christa T1 - Telepräsenzroboter - Potenzial als Unterstützung von Pflege und Therapie T2 - Digitale Technik für ambulante Pflege und Therapie III: Nutzung Akzeptanz Wirkung und Lebensqualität T3 - Regensburger Beiträge zur Digitalisierung des Gesundheitswesens - 4 Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?10.14361/9783839467282-002 SN - 978-3-8376-6728-8 SP - 7 EP - 12 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Röhrl, Simon A1 - Staufer, Susanne A1 - Bugert, Flemming A1 - Nadimpalli, Vamsi Krishna A1 - Hauser, Florian A1 - Grabinger, Lisa A1 - Bittner, Dominik A1 - Ezer, Timur A1 - Altweck, Ricardo A1 - Graf, Sabine A1 - Kriza, Thomas A1 - Mottok, Jürgen T1 - Ethical Considerations of AI in Education: A Case Study based on Pythia Learning Enhancement System JF - IEEE Access N2 - As the use of AI in education increases, addressing ethical concerns is essential for its responsible use and implementation. This study explores the ethical considerations of AI in education by analyzing a concrete application, the Pythia Learning Enhancement System, which enables personalized and adaptive educational experiences. In this case study, the concrete implementation of Pythia, contrary to high-level abstract analyses, provides practical insights into these ethical issues. To achieve this goal, we first define Pythia and outline its implementation. Using the various topics covered by Pythia, the ethical issues associated with each of these topics are outlined, resulting in a list of ten distinct ethical issues. Because there is overlap in issues covered by similar applications, they can benefit from this identification. An ethical (human rights) and didactic (constructivism) theoretical background is then provided as a basis for further discussion. This is used to build the arguments used in the main study. This consists of analyzing each of the issues and providing recommendations to mitigate potential harm arising from these issues. This helps to provide guidelines for future applications. In the analysis, the ethical discussion is mainly based on the human rights of the stakeholders involved, emphasizing human dignity. After the analysis, each of the issues is contextualized with the recent AI Act of the European Union, providing a novel mapping of the issues of AI in education to the AI Act. Finally, the limitations of the study are stated and a plan for future research is presented. KW - Ethics KW - Artificial intelligence KW - Education KW - Stakeholders KW - Psychology KW - Privacy KW - Search problems KW - Guidelines KW - Focusing KW - Europe Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-83403 SN - 2169-3536 N1 - Corresponding author der OTH Regensburg: Simon Röhrl VL - 11 SP - 1 EP - 25 PB - Institute of Electrical and Electronics Engineers (IEEE) ER - TY - JOUR A1 - Gärtner, Sebastian A1 - Rank, Daniel A1 - Heberl, Michael A1 - Gaderer, Matthias A1 - Dawoud, Belal A1 - Haumer, Anton A1 - Sterner, Michael T1 - Simulation and Techno-Economic Analysis of a Power-to-Hydrogen Process for Oxyfuel Glass Melting JF - Energies N2 - As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. As established combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is difficult. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study indicate, that the proposed system can reduce specific carbon dioxide emissions by up to 60%, while increasing specific energy demand by a maximum of 25%. Investigations of the impact of altered combustion and furnace properties like adiabatic flame temperature (+25 °C), temperature efficiency (∆ξ = −0.003) and heat capacity flow ratio (∆zHL = −0.009) indicate that pure hydrogen-oxygen combustion has less impact on melting properties than assumed so far. Within the case study, high CO2 abatement costs of 295 €/t CO2-eq. were determined. This is mainly due to the insufficient performance of renewable energy sources. The correlations between process scaling and economic parameters presented in this study show promising potential for further economic optimization of the proposed energy system in the future. KW - Power-to-Gas KW - Hydrogen KW - Electrolysis KW - Oxyfuel KW - Glass Industry Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-22713 N1 - Corresponding author: Sebastian Gärtner VL - 14 IS - 24 PB - MDPI ER - TY - JOUR A1 - Niedling, Katharina A1 - Richter, Stefanie A1 - Hämel, Kerstin T1 - Triadic relationships in home care nursing: an integrative review of the views and experiences of older couples and nurses JF - BMC nursing N2 - BACKGROUND The need for long-term home care for older people with chronic health conditions is rising, and family members are bearing the brunt of this care work. Caring for a partner is a common scenario. Caregiving partners are often of advanced age themselves and have limiting health conditions of their own. Nurses need to consider the specific characteristics of partner caregiving to provide relationship-centred care. This review aims to analyse perceptions of the triadic relationship between older persons with long-term care needs, their caregiving partners and nurses and to identify approaches that can be supportive approaches that can help couples to cope with at-home care situations. METHODS This integrative review following the method outlined by Whittemore and Knafl focuses on qualitative and mixed methods studies. A systematic search in the PubMed and CINAHL databases served to identify studies dealing with experiences and perceptions of triadic care arrangements in home-based care from the perspectives of nurses, care recipients and caregiving partners. Eight studies met the inclusion criteria and investigated perceptions of the triadic relationship between nurses providing home care and older couples. They were analysed using thematic analysis. RESULTS The results show that triadic relationships in home-based care are shaped by social dynamics, role conflicts and barriers to communication. Although many couples are initially reluctant to integrate nursing professionals into home caregiving, mutual trust can develop when personnel continuity is given and sustained relationship work is performed. Clear communication, clarity on the distribution of tasks and proactive knowledge sharing by nurses facilitate cooperation. Caregiving partners desire support with self-care to preserve their ability to continue in their caregiving roles in the long term. CONCLUSIONS Understanding the dynamics of triadic relationships in nursing care and the care situation in couple relationships enables nurses to provide more targeted support to older couples. Proactive communication, role clarity and continuity of care can reduce the burden shouldered by caregiving partners and improve care quality. Further research focusing on strategies for strengthening relationship-centred interventions in home-based care is desirable. CLINICAL TRIAL NUMBER Not applicable. Y1 - 2025 U6 - https://doi.org/10.1186/s12912-025-03378-1 VL - 24 PB - BMC ER - TY - JOUR A1 - Hansen, B. A1 - Hoebler, Michael A1 - Purr, Stephan A1 - Meinhardt, J. A1 - Merklein, Marion T1 - Basics for inline measurement of tribological conditions in series production of car body parts JF - IOP Conference Series: Materials Science and Engineering N2 - The quality of car body parts in series production is strongly dependent on the tribological behavior. Fluctuating material properties such as the sheet roughness and the amount of lubricant have an influence on the forming process. On the basis of large amounts of data it is possible to investigate the friction behavior in series production and to make process adjustments if required. Therefore, inline measurement systems have a great potential to detect the sheet roughness during the cutting process of blanks in the coil line. Furthermore, contactless systems are advantageous as they do not damage the surface. Nevertheless, the optical measuring is influenced by the lubricant layer on top of the surface. Therefore, the previously unknown impact of the lubricant on the measuring result is investigated. Within this study, stationary optical roughness measurements have been conducted using different amounts of lubricant on hot-dip galvanized EDT steel. The results demonstrate the influence of different amounts of lubricant on the sheet roughness measurement. Hence, it is possible to correct the inline measuring results and gain knowledge of fluctuating surface roughness. In addition, strip drawing test has been carried out to investigate the effect of fluctuating tribological conditions. Y1 - 2019 U6 - https://doi.org/10.1088/1757-899x/651/1/012050 VL - 651 PB - IOP Publishing ER - TY - CHAP A1 - Zhou, Ping A1 - Streubühr, C. A1 - Kalus, Annika A1 - Frigge, Tim A1 - Wall, S. A1 - Hanisch-Blicharski, Anja A1 - Kammler, Martin A1 - Ligges, Manuel A1 - Bovensiepen, U. A1 - von der Linde, D. A1 - Horn-von Hoegen, Michael T1 - Ultrafast time resolved reflection high energy electron diffraction with tilted pump pulse fronts T2 - EPJ Web of Conferences - XVIIIth International Conference on Ultrafast Phenomena N2 - We present time-resolved RHEED from a laser excited Pb(111) surface using a pulse front tilter for the compensation of the velocity mismatch of electrons and light. The laser pulses with tilted fronts were characterized by a spatially resolving cross correlator. The response of the surface upon excitation was observed to be less than 2 ps. Y1 - 2013 U6 - https://doi.org/10.1051/epjconf/20134110016 VL - 41 PB - EPJ ER - TY - JOUR A1 - Müller, Max A1 - Weigl, Stefan A1 - Müller-Williams, Jennifer A1 - Lindauer, Matthias A1 - Rück, Thomas A1 - Jobst, Simon A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - Comparison of photoacoustic spectroscopy and cavity ring-down spectroscopy for ambient methane monitoring at Hohenpeißenberg JF - Atmospheric Measurement Techniques N2 - With an atmospheric concentration of approximately 2000 parts per billion (ppbV, 10−9), methane (CH4) is the second most abundant greenhouse gas (GHG) in the atmosphere after carbon dioxide (CO2). The task of long-term and spatially resolved GHG monitoring to verify whether climate policy actions are effective is becoming more crucial as climate change progresses. In this paper we report the CH4 concentration readings of our photoacoustic (PA) sensor over a 5 d period at Hohenpeißenberg, Germany. As a reference device, a calibrated cavity ring-down spectrometer, Picarro G2301, from the meteorological observatory of the German Weather Service (DWD) was employed. Trace gas measurements with photoacoustic instruments promise to provide low detection limits at comparably low costs. However, PA devices are often susceptible to cross-sensitivities related to fluctuating environmental conditions, e.g. ambient humidity. The obtained results show that for PA sensor systems non-radiative relaxation effects induced by varying humidity are a non-negligible factor. Applying algorithm compensation techniques, which are capable of calculating the influence of non-radiative relaxation effects on the photoacoustic signal, increase the accuracy of the photoacoustic sensor significantly. With an average relative deviation of 1.11 % from the G2301, the photoacoustic sensor shows good agreement with the reference instrument. Y1 - 2023 U6 - https://doi.org/10.5194/amt-16-4263-2023 SN - 1867-8548 VL - 16 IS - 18 SP - 4263 EP - 4270 PB - Copernicus Publications ER - TY - CHAP A1 - Schlosser, Sophie ED - Rickert, Alexa ED - Schlosser, Sophie T1 - Steps on Steps BT - Scalalogical Reflections on Ancient Staircases T2 - Gestaltung, Funktion und Bedeutung antiker Treppenanlagen. Multiperspektivische Analyse einer transkulturellen Konstante KW - Antike KW - Architektur KW - Treppe KW - Stufe KW - Scalalogie Y1 - 2022 SN - 978-3-96327-215-8 U6 - https://doi.org/10.17879/43059664331 N1 - Zugleich Printpublikation und OA-Publikation SP - 23 EP - 46 PB - Zaphon CY - Münster ER - TY - JOUR A1 - Knödler, Leonard A1 - Dean, Jillian A1 - Knoedler, Samuel A1 - Kauke-Navarro, Martin A1 - Hollmann, Katharina A1 - Alfertshofer, Michael A1 - Helm, Sabrina A1 - Prantl, Lukas A1 - Schliermann, Rainer T1 - Hard shell, soft core? Multi-disciplinary and multi-national insights into mental toughness among surgeons JF - Frontiers in Surgery N2 - Background: With the prevalence of burnout among surgeons posing a significant threat to healthcare outcomes, the mental toughness of medical professionals has come to the fore. Mental toughness is pivotal for surgical performance and patient safety, yet research into its dynamics within a global and multi-specialty context remains scarce. This study aims to elucidate the factors contributing to mental toughness among surgeons and to understand how it correlates with surgical outcomes and personal well-being. Methods: Utilizing a cross-sectional design, this study surveyed 104 surgeons from English and German-speaking countries using the Mental Toughness Questionnaire (MTQ-18) along with additional queries about their surgical practice and general life satisfaction. Descriptive and inferential statistical analyses were applied to investigate the variations in mental toughness across different surgical domains and its correlation with professional and personal factors. Results: The study found a statistically significant higher level of mental toughness in micro-surgeons compared to macro-surgeons and a positive correlation between mental toughness and surgeons' intent to continue their careers. A strong association was also observed between general life satisfaction and mental toughness. No significant correlations were found between the application of psychological skills and mental toughness. Conclusion: Mental toughness varies significantly among surgeons from different specialties and is influenced by professional dedication and personal life satisfaction. These findings suggest the need for targeted interventions to foster mental toughness in the surgical community, potentially enhancing surgical performance and reducing burnout. Future research should continue to explore these correlations, with an emphasis on longitudinal data and the development of resilience-building programs. KW - mental toughness KW - mental health KW - resilience KW - robustness KW - psychology KW - surgery Y1 - 2024 U6 - https://doi.org/10.3389/fsurg.2024.1361406 N1 - Correspondign author der OTH Regensburg: Rainer Schliermann (und Leonard Knoedler) VL - 11 PB - Frontiers ER - TY - CHAP A1 - Gärtner, Sebastian A1 - Rank, Daniel A1 - Heberl, Michael A1 - Gaderer, Matthias A1 - Sterner, Michael T1 - Integration of Power-To-Methane into Glass Melting Processes T2 - Proceedings of the International Renewable Energy Storage Conference (IRES 2022) N2 - The glass industry is facing increased challenges regarding climate protection targets and rising energy costs. The integration of renewable energy including conversion and storage is a key for both challenges in this energy-intensive industrial sector, which has been mainly relying on fossil gas so far. The options considered to this point for reducing CO2 emissions and switching to a renewable energy supply involve far-reaching changes of the established melting processes. This entails significant risks in terms of influences on glass quality and stable production volumes. The presented approach for the integration of a Power-to-Methane (PtM) system into the glass industry is a completely new concept and has not been considered in detail before. It allows the use of established oxyfuel melting processes, the integration of fluctuating renewable energy sources and a simultaneous reduction of CO2 emissions by more than 78%. At the same time, natural gas purchases become obsolete. A techno-economic evaluation of the complete PtM process shows, that 1,76 €/m3 or 1,26 €/kg synthetic natural gas are possible with renewable energy supply. Using electricity from the energy grid would require electricity prices < 0,126 €/kWh to allow cost competitive PtM processes in the glass industry. Such electricity prices could be achieved by electricity market-based optimization and operation of the PtM system. This operation strategy would require AI-based algorithms predicting availabilities and prices on future-based markets. KW - Power-to-Gas KW - Methanation KW - Glass Melting KW - Glass Industry KW - Decarbonisation Y1 - 2023 U6 - https://doi.org/10.2991/978-94-6463-156-2_12 SN - 2589-4943 VL - 16 SP - 147 EP - 161 PB - Atlantis Press ER - TY - JOUR A1 - Haus, Moritz A1 - Foltan, Maik A1 - Philipp, Alois A1 - Müller, Thomas A1 - Lingel, Maximilian P. A1 - Krenkel, Lars A1 - Gruber, Michael A1 - Lehle, Karla T1 - Neutrophil extracellular traps -a potential trigger for the development of thrombocytopenia during extracorporeal membrane oxygenation N2 - Neutrophil extracellular traps (NETs) have recently emerged as a potential link between inflammation, immunity, and thrombosis, as well as other coagulation disorders which present a major challenge in the context of extracorporeal membrane oxygenation (ECMO). By examining blood from ECMO patients for NETs and their precursors and correlating them with clinical and laboratory biomarkers of coagulation and inflammation, this study aims to evaluate the association between the presence of NETs in the bloodstream of ECMO patients and the development of potentially severe coagulation disorders during ECMO therapy. Therefore, blood samples were collected from healthy volunteers (n=13) and patients receiving veno-venous (VV) ECMO therapy (n=10). To identify NETs and their precursors, DNA and myeloperoxidase as well as granulocyte marker CD66b were visualized simultaneously by immunofluorescence staining in serial blood smears. Differentiation of DNA-containing objects and identification of NETs and their precursors was performed semiautomatically by a specific algorithm using the shape and size of DNA staining and the intensity of MPO and CD66b signal. Neutrophil extracellular traps and their precursors could be detected in blood smears from patients requiring VV ECMO. Compared to volunteers, ECMO patients presented significantly higher rates of NETs and NET precursors as well as an increased proportion of neutrophil granulocytes in all detected nucleated cells. A high NET rate prior to the initiation of ECMO therapy was associated with both increased iL-6 and TNF-α levels as an expression of a high cytokine burden. These patients with increased NET release also presented an earlier and significantly more pronounced decrease in platelet counts and ATIII activity following initiation of therapy compared with patients with less elevated NETs. These findings provide further indications for the development of immune-mediated acquired thrombocytopenia in ECMO patients. KW - Neutrophil extracellular traps (NET) KW - Immunoflorescence KW - Thrombocytopenia KW - Extracorporeal membrane oxygenation (ECMO) KW - Sepsis KW - immunothrombosis KW - Coagulation disorder Y1 - 2024 UR - https://www.frontiersin.org/journals/immunology/articles/10.3389/fimmu.2024.1339235/abstract U6 - https://doi.org/10.3389/fimmu.2024.1339235 VL - 15 PB - frontiers ER - TY - CHAP A1 - Baumann, Timo A1 - Hussein, Hussein A1 - Meyer-Sickendiek, Burkhard ED - Schneider, Birgit ED - Löffler, Beate ED - Mager, Tino ED - Hein, Carola T1 - Free Verse Prosodies: Identifying and Classifying Spoken Poetry Using Literary and Computational Perspectives (Rhythmicalizer) T2 - Mixing Methods: Practical Insights from the Humanities in the Digital Age N2 - At least 80% of modern and postmodern poems exhibit neither rhyme nor metrical schemes such as iamb or trochee. However, does this mean that they are free of any rhythmical features?TheUS American research onfree verse prosody claimsthe opposite: Modern poets like Whitman, the Imagists, the Beat poets and contemporary Slam poets have developed a postmetrical idea of prosody, using rhythmical features of everyday language, prose, and musical styles like Jazz or Hip Hop. It has spawned a large and complex variety intheir poetic prosodies which,however,appearto bemuchharderto quantify and regularize than traditional patterns. In our project, we examinethe largest portal for spoken poetry Lyrikline and analysed and classified such rhythmical patterns by using pattern recognition and classification techniques. We integrate a human-in-the-loop approach in which we interleave manual annotation with computational modelling and data-based analysis. Our results are integrated into the website of Lyrikline. Our follow-up project makes our research results available to a wider audience, in particular to high school-level teaching. Y1 - 2023 U6 - https://doi.org/10.1515/9783839469132-018 SP - 167 EP - 186 PB - Bielefeld University Press CY - Bielefeld ER - TY - JOUR A1 - Lichtenauer, Norbert A1 - Schlachetzki, Felix A1 - Eberl, Inge A1 - Meussling-Sentpali, Annette T1 - Differences in teletherapy and telecare?-Experiences of health professionals and patients with video communication in nursing, physiotherapy, occupational therapy, and speech therapy JF - Digital health N2 - INTRODUCTION The spread and implementation of digital synchronous video communication in telecare and teletherapy has recently increased significantly, not just because of COVID-19 but also due to a global trend towards more digital healthcare services in the last two decades. This shift prompts the question of how digital telesetting differs from a face-to-face setting and which aspects are fundamental. METHODS As the first part of a mixed-method study, qualitative interviews (n = 20) were conducted from July 2021 to January 2022. Health professionals (n = 13) and patients (n = 7) from occupational therapy, physiotherapy, speech therapy, and nursing were interviewed. All interviewees came from Germany, Austria, and Switzerland. The results were categorized using structured content analysis. RESULTS Six main categories and 20 sub-categories were summarized, which can act as barriers or resources in a telesetting. Both sides described a high level of acceptance and approval of telesetting. Motivation and digital skills were of great importance. Furthermore, special features in communication and interaction were described, as well as changes in organizational procedures and a specific process flow in telesetting. Including relatives was more feasible, although several environmental factors should be considered. DISCUSSION A number of specific changes in a telesetting compared to a face-to-face setting show the need for a structured guide for interested parties. Appropriate basic principles must be taught in training and further education to support the spread of this new form of care. Furthermore, it is crucial to adapt the methodological and content-related aspects of telesetting and develop new approaches that specifically integrate audio-visual possibilities. Y1 - 2024 U6 - https://doi.org/10.1177/20552076241301963 VL - 10 PB - Sage ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Glavan, Gašper A1 - Belan, Viktoria O. A1 - Belyaeva, Inna A. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Resonant Magnetoelectric Effect at Low Frequencies in Layered Polymeric Cantilevers Containing a Magnetoactive Elastomer JF - Applied Sciences N2 - In this work, the resonance enhancement of magnetoelectric (ME) coupling at the two lowest bending resonance frequencies was investigated in layered cantilever structures comprising a magnetoactive elastomer (MAE) slab and a commercially available piezoelectric polymer multilayer. A cantilever was fixed at one end in the horizontal plane and the magnetic field was applied horizontally. Five composite structures, each containing an MAE layer of different thicknesses from 0.85 to 4 mm, were fabricated. The fundamental bending resonance frequency in the absence of a magnetic field varied between roughly 23 and 55 Hz. It decreased with the increasing thickness of the MAE layer, which was explained by a simple theory. The largest ME voltage coefficient of about 7.85 V/A was measured in a sample where the thickness of the MAE layer was ≈2 mm. A significant increase in the bending resonance frequencies in the applied DC magnetic field of 240 kA/m up to 200% was observed. The results were compared with alternative designs for layered multiferroic structures. Directions for future research were also discussed. KW - flexible composite KW - low frequency KW - magnetoactive elastomer KW - magnetoelectric effect KW - piezoelectric polymer Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-30637 N1 - corresponding authors: Dmitry V. Saveliev and Mikhail Shamonin VL - 12 IS - 4 SP - 1 EP - 13 PB - MPDI ER - TY - JOUR A1 - Markov-Glazer, Alon A1 - Elbe, Anne-Marie A1 - Schliermann, Rainer T1 - From their eyes: Deaflympic athletes' and coaches' perspectives on mental training JF - Frontiers in sports and active living N2 - INTRODUCTION Sport psychology research has largely overlooked athletes with hearing impairments competing in Deaflympic sports, the designated elite sporting movement for this population. This study therefore explored Deaflympic athletes' and coaches' perspectives on mental training in the elite Deaf sports. METHODS A qualitative approach was used, involving six focus group interviews with 23 athletes (Mage = 33.09; 26.1% female) and four coaches from individual and team Deaf sports. Data were analyzed using reflexive thematic analysis. RESULTS Three themes emerged: sport psychology consultation, the influence of visual orientation on psychological skills and demands, and Deaf sport culture and communication. While participants expressed strong interest in sport psychology, engagement with professionals was limited by accessibility issues, lack of sign language-fluent consultants, and structural barriers. Deaf athletes reported adapting some techniques to match their visual-spatial orientation and both advantages and challenges of visual reliance in sports. Distinct communication dynamics between native signers and spoken-language users within Deaf teams were also revealed. DISCUSSION These findings highlight the importance of culturally sensitive sport psychology frameworks that support the needs and preferences of Deaflympic athletes and promote equitable access to effective mental training resources. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84183 N1 - Corresponding author der OTH Regensburg: Alon Markov-Glazer VL - 7 PB - Frontiers ER - TY - JOUR A1 - Fetisov, Yuri K. A1 - Chashin, Dmitri V. A1 - Savelev, Dmitrii V. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Anisotropic Magnetoelectric Effect in a Planar Heterostructure Comprising Piezoelectric Ceramics and Magnetostrictive Fibrous Composite JF - Materials N2 - The direct magnetoelectric (ME) effect is investigated in a planar structure comprising mechanically coupled layers of a magnetostrictive fibrous composite (MFC) and a piezoelectric ceramics (lead zirconate titanate, PZT). The MFC is an array of Ni-wires with a diameter of 200 mu m that are aligned parallel to each other in a single layer. The wires are separated by a distance of 250 or 500 mu m and fixed in a polyamide matrix. The structure was placed in a tangential constant field H and was excited by an alternating magnetic field h parallel to H, while the voltage generated by the PZT layer was measured. The resulting field dependences of the magnetization M(H) and the magnetostriction lambda(H) were determined by the orientation of the field H in the plane of the structure and the distance between the Ni-wires. The ME coupling coefficient of the structure decreased from 4.8 to 0.25 V/A when the orientation of H was changed from parallel to perpendicular to Ni-wires. With an increase in the excitation field amplitude h, a nonlinear ME effect in the output voltage, namely frequency doubling, was observed. The frequency and field dependences of the efficiency of the ME transduction in the MFC-piezoelectric heterostructure are well described by the existing theory. KW - composite KW - frequency doubling KW - heterostructure KW - magnetoelectric effect KW - magnetostrictive fiber KW - piezoelectric ceramic material Y1 - 2019 U6 - https://doi.org/10.3390/ma12193228 N1 - Corresponding authors: Yuri Fetisov, Mikhail Shamonin VL - 12 IS - 19 SP - 1 EP - 13 PB - MDPI CY - Basel ER - TY - JOUR A1 - Kheiroddin, Parastoo A1 - Schöberl, Patricia A1 - Althammer, Michael A1 - Cibali, Ezgi A1 - Würfel, Thea A1 - Wein, Hannah A1 - Kulawik, Birgit A1 - Buntrock-Döpke, Heike A1 - Weigl, Eva A1 - Gran, Silvia A1 - Gründl, Magdalena A1 - Langguth, Jana A1 - Lampl, Benedikt A1 - Judex, Guido A1 - Niggel, Jakob A1 - Pagel, Philipp A1 - Schratzenstaller, Thomas A1 - Schneider-Brachert, Wulf A1 - Gastiger, Susanne A1 - Bodenschatz, Mona A1 - Konrad, Maike A1 - Levchuk, Artem A1 - Roth, Cornelius A1 - Schöner, David A1 - Schneebauer, Florian A1 - Rohrmanstorfer, René A1 - Burkovski, Andreas A1 - Ambrosch, Andreas A1 - Wagner, Thomas A1 - Kabesch, Michael ED - Buonsenso, Danilo T1 - Results of WICOVIR Gargle Pool PCR Testing in German Schools Based on the First 100,000 Tests JF - Frontiers in Pediatrics N2 - Background: Opening schools and keeping children safe from SARS-CoV-2 infections at the same time is urgently needed to protect children from direct and indirect consequences of the COVID-19 pandemic. To achieve this goal, a safe, efficient, and cost-effective SARS-CoV-2 testing system for schools in addition to standard hygiene measures is necessary. Methods: We implemented the screening WICOVIR concept for schools in the southeast of Germany, which is based on gargling at home, pooling of samples in schools, and assessment of SARS-CoV-2 by pool rRT-PCR, performed decentralized in numerous participating laboratories. Depooling was performed if pools were positive, and results were transmitted with software specifically developed for the project within a day. Here, we report the results after the first 13 weeks in the project. Findings: We developed and implemented the proof-of-concept test system within a pilot phase of 7 weeks based on almost 17,000 participants. After 6 weeks in the main phase of the project, we performed >100,000 tests in total, analyzed in 7,896 pools, identifying 19 cases in >100 participating schools. On average, positive children showed an individual CT value of 31 when identified in the pools. Up to 30 samples were pooled (mean 13) in general, based on school classes and attached school staff. All three participating laboratories detected positive samples reliably with their previously established rRT-PCR standard protocols. When self-administered antigen tests were performed concomitantly in positive cases, only one of these eight tests was positive, and when antigen tests performed after positive pool rRT-PCR results were already known were included, 3 out of 11 truly positive tests were also identified by antigen testing. After 3 weeks of repetitive WICOVIR testing twice weekly, the detection rate of positive children in that cohort decreased significantly from 0.042 to 0.012 (p = 0.008). Interpretation: Repeated gargle pool rRT-PCR testing can be implemented quickly in schools. It is an effective, valid, and well-received test system for schools, superior to antigen tests in sensitivity, acceptance, and costs. KW - children KW - COVID-19 KW - Germany KW - PCR KW - pooling KW - gargle KW - schools KW - pandemic KW - Covid-19 KW - Polymerase-Kettenreaktion KW - Nachweis KW - Schulkind KW - Deutschland Y1 - 2021 U6 - https://doi.org/10.3389/fped.2021.721518 SN - 2296-2360 VL - 9 PB - frontiers ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Chashin, Dmitri V. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail A1 - Fetisov, Yuri K. T1 - Ceramic-Heterostructure-Based Magnetoelectric Voltage Transformer with an Adjustable Transformation Ratio JF - Materials N2 - A voltage transformer employing the magnetoelectric effect in a composite ceramic heterostructure with layers of a magnetostrictive nickel–cobalt ferrite and a piezoelectric lead zirconate–titanate is described. In contrast to electromagnetic and piezoelectric transformers, a unique feature of the presented transformer is the possibility of tuning the voltage transformation ratio K using a dc magnetic field. The dependences of the transformer characteristics on the frequency and the amplitude of the input voltage, the strength of the control magnetic field and the load resistance are investigated. The transformer operates in the voltage range between 0 and 112 V, and the voltage transformation ratio K is tuned between 0 and 14.1 when the control field H changes between 0 and 6.4 kA/m. The power at the transformer output reached 63 mW, and the power conversion efficiency was 34%. The methods for calculation of the frequency response, and the field and load characteristics of the transformer are proposed. The ways to improve performance characteristics of magnetoelectric transformers and their possible application areas are discussed. KW - magnetoelectric effect KW - piezoelectric effect KW - voltage transformer KW - composite material KW - magnetostriction Y1 - 2020 U6 - https://doi.org/10.3390/ma13183981 VL - 13 IS - 18 SP - 1 EP - 13 PB - MDPI ER - TY - JOUR A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Ruwisch, Kevin A1 - Wollschlaeger, Joachim A1 - Shamonin (Chamonine), Mikhail T1 - Magnetoelectric Response of Laminated Cantilevers Comprising a Magnetoactive Elastomer and a Piezoelectric Polymer, in Pulsed Uniform Magnetic Fields JF - Sensors N2 - The voltage response to pulsed uniform magnetic fields and the accompanying bending deformations of laminated cantilever structures are investigated experimentally in detail. The structures comprise a magnetoactive elastomer (MAE) slab and a commercially available piezoelectric polymer multilayer. The magnetic field is applied vertically and the laminated structures are customarily fixed in the horizontal plane or, alternatively, slightly tilted upwards or downwards. Six different MAE compositions incorporating three concentrations of carbonyl iron particles (70 wt%, 75 wt% and 80 wt%) and two elastomer matrices of different stiffness are used. The dependences of the generated voltage and the cantilever's deflection on the composition of the MAE layer and its thickness are obtained. The appearance of the voltage between the electrodes of a piezoelectric material upon application of a magnetic field is considered as a manifestation of the direct magnetoelectric (ME) effect in a composite laminated structure. The ME voltage response increases with the increasing total quantity of the soft-magnetic filler in the MAE layer. The relationship between the generated voltage and the cantilever's deflection is established. The highest observed peak voltage around 5.5 V is about 8.5-fold higher than previously reported values. The quasi-static ME voltage coefficient for this type of ME heterostructures is about 50 V/A in the magnetic field of approximate to 100 kA/m, obtained for the first time. The results could be useful for the development of magnetic field sensors and energy harvesting devices relying on these novel polymer composites. KW - cantilever KW - composites KW - DEMAGNETIZING FACTORS KW - direct magnetoelectric effect KW - laminated structure KW - magnetic field sensor KW - magnetoactive elastomer KW - piezoelectric polymer Y1 - 2021 U6 - https://doi.org/10.3390/s21196390 N1 - Corresponding authors: Gašper Glavan, Mikhail Shamonin VL - 21 IS - 19 SP - 1 EP - 19 PB - MDPI CY - Basel ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Belyaeva, Inna A. A1 - Chashin, Dmitri V. A1 - Fetisov, Leonid Y. A1 - Romeis, Dirk A1 - Kettl, Wolfgang A1 - Kramarenko, Elena Yu A1 - Saphiannikova, Marina A1 - Stepanov, Gennady V. A1 - Shamonin (Chamonine), Mikhail T1 - Giant extensional strain of magnetoactive elastomeric cylinders in uniform magnetic fields JF - Materials N2 - Elongations of magnetoactive elastomers (MAEs) under ascending–descending uniform magnetic fields were studied experimentally using a laboratory apparatus specifically designed to measure large extensional strains (up to 20%) in compliant MAEs. In the literature, such a phenomenon is usually denoted as giant magnetostriction. The synthesized cylindrical MAE samples were based on polydimethylsiloxane matrices filled with micrometer-sized particles of carbonyl iron. The impact of both the macroscopic shape factor of the samples and their magneto-mechanical characteristics were evaluated. For this purpose, the aspect ratio of the MAE cylindrical samples, the concentration of magnetic particles in MAEs and the effective shear modulus were systematically varied. It was shown that the magnetically induced elongation of MAE cylinders in the maximum magnetic field of about 400 kA/m, applied along the cylinder axis, grew with the increasing aspect ratio. The effect of the sample composition is discussed in terms of magnetic filler rearrangements in magnetic fields and the observed experimental tendencies are rationalized by simple theoretical estimates. The obtained results can be used for the design of new smart materials with magnetic-field-controlled deformation properties, e.g., for soft robotics. KW - magnetostriction KW - magnetoactive elastomer KW - extensional strain KW - hysteresis KW - magnetomechanical effect KW - magnetodeformation Y1 - 2020 U6 - https://doi.org/10.3390/ma13153297 SN - 1996-1944 N1 - Corresponding author: Mikhail Shamonin VL - 13 IS - 15 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Dillinger, Andrea Elisabeth A1 - Weber, Gregor R. A1 - Mayer, Matthias A1 - Schneider, Magdalena A1 - Göppner, Corinna A1 - Ohlmann, Andreas A1 - Shamonin (Chamonine), Mikhail A1 - Monkman, Gareth J. A1 - Fuchshofer, Rudolf A1 - Keller, Kate A1 - Lozano, Diana C. A1 - Clark, Abbot T1 - CCN2/CTGF-A Modulator of the Optic Nerve Head Astrocyte JF - Frontiers in cell and developmental biology (Front Cell Dev Biol.) N2 - In primary open-angle glaucoma (POAG), a neurodegenerative disease of the optic nerve (ON) and leading cause of blindness, the optic nerve head (ONH) undergoes marked structural extracellular matrix (ECM) changes, which contribute to its permanent deformation and to degeneration of ON axons. The remodeling process of the ECM causes changes in the biomechanical properties of the ONH and the peripapillary sclera, which is accompanied by an increased reactivity of the resident astrocytes. The molecular factors involved in the remodeling process belong to the Transforming growth factor (TGF)-β superfamily, especially TGF-β2. In previous publications we showed that TGF-β2 induced ECM alterations are mediated by Cellular Communication Network Factor (CCN)2/Connective Tissue Growth Factor (CTGF) and recently we showed that CCN2/CTGF is expressed by astrocytes of the ON under normal conditions. In this study we wanted to get a better understanding of the function of CCN2/CTGF under normal and pathologic conditions. To this end, we analyzed the glial lamina and peripapillary sclera of CCN2/CTGF overexpressing mice and studied the effect of CCN2/CTGF and increasing substratum stiffness on murine ON astrocytes in vitro. We observed enhanced astrocyte reactivity in the ONH, increased ECM protein synthesis in the peripapillary sclera and increased Ccn2/Ctgf expression in the ONH during the pathologic development in situ. CCN2/CTGF treatment of primary murine ON astrocytes induced a higher migration rate, and increase of ECM proteins including fibronectin, elastin and collagen type III. Furthermore, the astrocytes responded to stiffer substratum with increased glial fibrillary acidic protein, vimentin, actin and CCN2/CTGF synthesis. Finally, we observed the reinforced appearance of CCN2/CTGF in the lamina cribrosa of glaucomatous patients. We conclude that reactive changes in ONH astrocytes, induced by the altered biomechanical characteristics of the region, give rise to a self-amplifying process that includes increased TGF-β2/CCN2/CTGF signaling and leads to the synthesis of ECM molecules and cytoskeleton proteins, a process that in turn augments the stiffness at the ONH. Such a scenario may finally result in a vicious circle in the pathogenesis of POAG. The transgenic CTGF-overexpressing mouse model might be an optimal model to study the chronic pathological POAG changes in the ONH. KW - astrocytes KW - extracellar matrix KW - glaucoma KW - glial lamina KW - growth factors KW - optic nerve KW - stiffness Y1 - 2022 U6 - https://doi.org/10.3389/fcell.2022.864433 VL - 10 PB - frontiers ER - TY - JOUR A1 - Schels, Andreas A1 - Herdl, Florian A1 - Hausladen, Matthias A1 - Wohlfartsstätter, Dominik A1 - Edler, Simon A1 - Bachmann, Michael A1 - Pahlke, Andreas A1 - Schreiner, Rupert A1 - Hansch, Walter T1 - Quantitative Field Emission Imaging for Studying the Doping-Dependent Emission Behavior of Silicon Field Emitter Arrays JF - Micromachines N2 - Field emitter arrays (FEAs) are a promising component for novel vacuum micro- and nanoelectronic devices, such as microwave power amplifiers or fast-switching X-ray sources. However, the interrelated mechanisms responsible for FEA degradation and failure are not fully understood. Therefore, we present a measurement method for quantitative observation of individual emission sites during integral operation using a low-cost, commercially available CMOS imaging sensor. The emission and degradation behavior of three differently doped FEAs is investigated in current-regulated operation. The measurements reveal that the limited current of the p-doped emitters leads to an activation of up to 55% of the individual tips in the array, while the activation of the n-type FEA stopped at around 30%. This enhanced activation results in a more continuous and uniform current distribution for the p-type FEA. An analysis of the individual emitter characteristics before and after a constant current measurement provides novel perspectives on degradation behavior. A burn-in process that trims the emitting tips to an integral current-specific ideal field enhancement factor is observed. In this process, blunt tips are sharpened while sharp tips are dulled, resulting in homogenization within the FEA. The methodology is described in detail, making it easily adaptable for other groups to apply in the further development of promising FEAs. Y1 - 2023 U6 - https://doi.org/10.3390/mi14112008 VL - 14 IS - 11 PB - MDPI ER - TY - CHAP A1 - Carbonelli, Cecilia A1 - Felderer, Michael A1 - Jung, Matthias A1 - Lobe, Elisabeth A1 - Lochau, Malte A1 - Luber, Sebastian A1 - Mauerer, Wolfgang A1 - Ramler, Rudolf A1 - Schäfer, Ina A1 - Schroth, Christoph ED - Exman, Iaakov ED - Perez-Castillo, Ricardo ED - Piattini, Mario ED - Felderer, Michael T1 - Challenges for Quantum Software Engineering: An Industrial Application Scenario Perspective T2 - Quantum Software: Aspects of Theory and System Design N2 - Quantum software is becoming a key enabler for applying quantum computing to industrial use cases. This poses challenges to quantum software engineering in providing efficient and effective means to develop such software. Eventually, this must be reliably achieved in time, on budget, and in quality, using sound and well-principled engineering approaches. Given that quantum computers are based on fundamentally different principles than classical machines, this raises the question if, how, and to what extent established techniques for systematically engineering software need to be adapted. In this chapter, we analyze three paradigmatic application scenarios for quantum software engineering from an industrial perspective. The respective use cases center around (1) optimization and quantum cloud services, (2) quantum simulation, and (3) embedded quantum computing. Our aim is to provide a concise overview of the current and future applications of quantum computing in diverse industrial settings. We derive presumed challenges for quantum software engineering and thus provide research directions for this emerging field. KW - industrial use cases KW - quantum computing KW - quantum software engineering KW - software development KW - software engineering Y1 - 2024 SN - 978-3-031-64135-0 SN - 978-3-031-64136-7 U6 - https://doi.org/10.1007/978-3-031-64136-7_12 PB - Springer-Nature ER - TY - JOUR A1 - Huszák, Loretta A1 - Kauppinen, Antti A1 - Saßmannshausen, Sean Patrick A1 - Sobolieva, Tetiana A1 - Steger, Thomas ED - Huszák, Loretta ED - Kauppinen, Antti ED - Saßmannshausen, Sean Patrick ED - Sobolieva, Tetiana ED - Steger, Thomas T1 - Entrepreneurship Education in the Danube Region JF - JEEMS - Journal of East European Management Studies, Special Issue 2024: Entrepreneurship Education in Central and East Europe N2 - Resources for entrepreneurship education are not evenly distributed around the world, and territorial cooperation is often necessary. This is particularly true for the Eastern European region and especially for the Danube region. Entrepreneurship research (including entrepreneurship education) has a long tradition in Western countries but catching up and integration into international networks poses a challenge, especially for Eastern countries. The aim of this special issue is to contribute to the development of this international cooperation by presenting research and best practices in entrepreneurship education in Central and Eastern Europe. The special issue is part of the Danube Cup initiative, which combines entrepreneurship teaching and research to provide opportunities for entrepreneurship educators to benchmark best educational practices and develop inspiring research results in the field of entrepreneurship education. KW - Entrepreneurship KW - Entrepreneurship Education KW - Entrepreneurship Research Y1 - 2025 SN - 9783748949602 U6 - https://doi.org/10.5771/9783748949602-7 SP - 7 EP - 14 PB - Nomos ER - TY - CHAP A1 - Hauer, Franziska A1 - Schultz, Maximilian A1 - Haug, Sonja A1 - Weber, Karsten ED - Baumgartner, Martin ED - Hayn, Dieter ED - Pfeifer, Bernhard ED - Schreier, Günter T1 - Acceptance and Usage of AI Applications in Health-Focused NGOs T2 - dHealth 2025, Proceedings of the 19th Health Informatics Meets Digital Health Conference N2 - Background: AI applications promise to be a valuable tool for healthfocused NGOs. While often operating with limited resources, these organizations recognize the potential of AI to streamline processes and support workflows through automation. However, challenges such as data privacy concerns—especially regarding personal medical data—and the low prioritization of implementation hinder progress. Objectives: This study examines the extent to which German health-focused NGOs can currently benefit from the application of AI. It evaluates demands, available resources, and use cases. Methods: A health-focused subset of data from project KINiro was analyzed. This research utilized a mixed-methods approach, combining two rounds of qualitative interviews with a quantitative survey. Results: The study revealed that while health-focused NGOs are in the early stages of AI implementation, there are hurdles such as ethical concerns and a lack of resources. Conclusion: AI has the potential to support health-focused NGOs in their work, if the challenges like resources, ethics, and data privacy are effectively addressed. KW - Künstliche Intelligenz KW - Nichtregierungsorganisationen KW - Gesundheit KW - Large Language Models KW - qualitative Research KW - Artificial Intelligence KW - Non-Governmental Organizations Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-80613 SN - 978-1-64368-592-2 SP - 123 EP - 128 PB - IOS Press CY - Wien ER - TY - JOUR A1 - Rill, Georg A1 - Schuderer, Matthias T1 - A Second-Order Dynamic Friction Model Compared to Commercial Stick–Slip Models JF - Modelling N2 - Friction has long been an important issue in multibody dynamics. Static friction models apply appropriate regularization techniques to convert the stick inequality and the non-smooth stick–slip transition of Coulomb’s approach into a continuous and smooth function of the sliding velocity. However, a regularized friction force is not able to maintain long-term stick. That is why dynamic friction models were developed in recent decades. The friction force depends herein not only on the sliding velocity but also on internal states. The probably best-known representative, the LuGre friction model, is based on a fictitious bristle but realizes a too-simple approximation. The recently published second-order dynamic friction model describes the dynamics of a fictitious bristle more accurately. It is based on a regularized friction force characteristic, which is continuous and smooth but can maintain long-term stick due to an appropriate shift in the regularization. Its performance is compared here to stick–slip friction models, developed and launched not long ago by commercial multibody software packages. The results obtained by a virtual friction test-bench and by a more practical festoon cable system are very promising. Thus, the second-order dynamic friction model may serve not only as an alternative to the LuGre model but also to commercial stick–slip models. KW - commercial stick–slip friction models KW - dynamic friction model KW - long-term stick KW - multibody dynamics Y1 - 2023 U6 - https://doi.org/10.3390/modelling4030021 SN - 2673-3951 N1 - Corresponding author: Georg Rill VL - 4 IS - 3 SP - 366 EP - 381 PB - MDPI ER - TY - CHAP A1 - Ortner, Martina ED - Schöpf, Nicolas T1 - Didaktik und Lehre im berufsbegleitenden Studiengang Soziale Arbeit – ein Erfahrungsbericht T2 - Akademische Weiterbildung für Soziale Berufe: Theoretische, empirische und praktische Aspekte N2 - Der Erfahrungsbericht ist zugleich ein Ideenpool für experimentierfreudige Lehrende. Nach einer kurzen Beschreibung des Settings im berufsbegleitenden Studiengang werden ausgewählte Grundlagen der Didaktik skizziert und vor diesem Hintergrund drei Beispiele aus unterschiedlichen Semestern vorgestellt. Daran wird gezeigt, wie Lehre und Didaktik im Studiengang Soziale Arbeit den Bedürfnissen der berufsbegleitend Studierenden dialogorientiert angepasst und weiterentwickelt werden. Die Erkenntnisse werden abschließend in drei Kernaussagen gebündelt. Y1 - 2022 SN - 9783763966479 U6 - https://doi.org/10.3278/9783763966479 SP - 161 EP - 191 PB - wbv CY - Bielefeld ET - 1. Aufl. ER - TY - JOUR A1 - Hausladen, Matthias A1 - Schels, Andreas A1 - Asgharzade, Ali A1 - Buchner, Philipp A1 - Bartl, Mathias A1 - Wohlfartsstätter, Dominik A1 - Edler, Simon A1 - Bachmann, Michael A1 - Schreiner, Rupert T1 - Investigation of Influencing Factors on the Measurement Signal of a CMOS Image Sensor for Measuring Field Emission Currents JF - Sensors Y1 - 2025 U6 - https://doi.org/10.3390/s25051529 N1 - Corresponding author der OTH Regensburg: Matthias Hausladen VL - 25 IS - 5 PB - MDPI ER - TY - JOUR A1 - Vogl, Yannick A1 - Schulz, Carsten A1 - Schaeffer, Thomas A1 - Geiger, Benjamin T1 - Prediction of the wear behavior of a conveyor belt with flexible rollers JF - Multibody System Dynamics N2 - This paper introduces a method to predict wear behavior in conveyor belt systems using a lumped mass modeling approach. While previous research has focused primarily on lateral belt walking, this study shifts attention to belt deformation and its associated wear. Both significantly affect system efficiency and component lifespan. The authors propose using local frictional power as a wear indicator, leveraging its direct relation to frictional work in established wear models. To solely demonstrate the method, the study simulates a conveyor belt with three flexible rollers and a deformable belt modeled through rigid spheres connected by spring-damper elements. The authors visualize frictional power density across the belt width, distinguishing between running and transverse directions. The results demonstrate that the frictional power distribution depends heavily on discretization quality, particularly due to the polygon effect inherent in the lumped mass approach. A convergence analysis reveals the minimum necessary discretization of the belt, ensuring reliable qualitative results. To support the credibility of the work, this study compares theoretical expectations and initial wear observations from a real belt with the results from the shown approach. The plausibility check already shows promising results. The proposed methodology provides an adaptable framework to evaluate wear in belt-like structures. It can be readily adapted to a variety of multibody dynamics applications and integrated into larger MBS models that include the overall drivetrain and engine control. Future work will focus on refining discretization strategies and contact models, as well as validation of the wear model to enable quantitative predictions. Y1 - 2025 U6 - https://doi.org/10.1007/s11044-025-10097-7 SN - 1384-5640 N1 - Die Preprint-Version ist ebenfalls in diesem Repositorium verzeichnet: https://opus4.kobv.de/opus4-oth-regensburg/8194 PB - Springer CY - Cham ER - TY - JOUR A1 - Hartmann, Robin A1 - Nieberle, Felix A1 - Palm, Christoph A1 - Brébant, Vanessa A1 - Prantl, Lukas A1 - Kuehle, Reinald A1 - Reichert, Torsten E. A1 - Taxis, Juergen A1 - Ettl, Tobias T1 - Utility of Smartphone-based Three-dimensional Surface Imaging for Digital Facial Anthropometry JF - JPRAS Open N2 - Background The utilization of three-dimensional (3D) surface imaging for facial anthropometry is a significant asset for patients undergoing maxillofacial surgery. Notably, there have been recent advancements in smartphone technology that enable 3D surface imaging. In this study, anthropometric assessments of the face were performed using a smartphone and a sophisticated 3D surface imaging system. Methods 30 healthy volunteers (15 females and 15 males) were included in the study. An iPhone 14 Pro (Apple Inc., USA) using the application 3D Scanner App (Laan Consulting Corp., USA) and the Vectra M5 (Canfield Scientific, USA) were employed to create 3D surface models. For each participant, 19 anthropometric measurements were conducted on the 3D surface models. Subsequently, the anthropometric measurements generated by the two approaches were compared. The statistical techniques employed included the paired t-test, paired Wilcoxon signed-rank test, Bland–Altman analysis, and calculation of the intraclass correlation coefficient (ICC). Results All measurements showed excellent agreement between smartphone-based and Vectra M5-based measurements (ICC between 0.85 and 0.97). Statistical analysis revealed no statistically significant differences in the central tendencies for 17 of the 19 linear measurements. Despite the excellent agreement found, Bland–Altman analysis revealed that the 95% limits of agreement between the two methods exceeded ±3 mm for the majority of measurements. Conclusion Digital facial anthropometry using smartphones can serve as a valuable supplementary tool for surgeons, enhancing their communication with patients. However, the proposed data suggest that digital facial anthropometry using smartphones may not yet be suitable for certain diagnostic purposes that require high accuracy. KW - Three-dimensional surface imaging KW - Stereophotogrammetry KW - Smartphone-based surface imaging KW - Digital anthropometry KW - Facial anthropometry Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-70348 VL - 39 SP - 330 EP - 343 PB - Elsevier ER - TY - JOUR A1 - Knödler, Leonard A1 - Baecher, Helena A1 - Kauke-Navarro, Martin A1 - Prantl, Lukas A1 - Machens, Hans-Günther A1 - Scheuermann, Philipp A1 - Palm, Christoph A1 - Baumann, Raphael A1 - Kehrer, Andreas A1 - Panayi, Adriana C. A1 - Knoedler, Samuel T1 - Towards a Reliable and Rapid Automated Grading System in Facial Palsy Patients: Facial Palsy Surgery Meets Computer Science JF - Journal of Clinical Medicine N2 - Background: Reliable, time- and cost-effective, and clinician-friendly diagnostic tools are cornerstones in facial palsy (FP) patient management. Different automated FP grading systems have been developed but revealed persisting downsides such as insufficient accuracy and cost-intensive hardware. We aimed to overcome these barriers and programmed an automated grading system for FP patients utilizing the House and Brackmann scale (HBS). Methods: Image datasets of 86 patients seen at the Department of Plastic, Hand, and Reconstructive Surgery at the University Hospital Regensburg, Germany, between June 2017 and May 2021, were used to train the neural network and evaluate its accuracy. Nine facial poses per patient were analyzed by the algorithm. Results: The algorithm showed an accuracy of 100%. Oversampling did not result in altered outcomes, while the direct form displayed superior accuracy levels when compared to the modular classification form (n = 86; 100% vs. 99%). The Early Fusion technique was linked to improved accuracy outcomes in comparison to the Late Fusion and sequential method (n = 86; 100% vs. 96% vs. 97%). Conclusions: Our automated FP grading system combines high-level accuracy with cost- and time-effectiveness. Our algorithm may accelerate the grading process in FP patients and facilitate the FP surgeon’s workflow. Y1 - 2022 U6 - https://doi.org/10.3390/jcm11174998 VL - 11 IS - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Ott, Tankred A1 - Palm, Christoph A1 - Vogt, Robert A1 - Oberprieler, Christoph T1 - GinJinn: An object-detection pipeline for automated feature extraction from herbarium specimens JF - Applications in Plant Sciences N2 - PREMISE: The generation of morphological data in evolutionary, taxonomic, and ecological studies of plants using herbarium material has traditionally been a labor-intensive task. Recent progress in machine learning using deep artificial neural networks (deep learning) for image classification and object detection has facilitated the establishment of a pipeline for the automatic recognition and extraction of relevant structures in images of herbarium specimens. METHODS AND RESULTS: We implemented an extendable pipeline based on state-of-the-art deep-learning object-detection methods to collect leaf images from herbarium specimens of two species of the genus Leucanthemum. Using 183 specimens as the training data set, our pipeline extracted one or more intact leaves in 95% of the 61 test images. CONCLUSIONS: We establish GinJinn as a deep-learning object-detection tool for the automatic recognition and extraction of individual leaves or other structures from herbarium specimens. Our pipeline offers greater flexibility and a lower entrance barrier than previous image-processing approaches based on hand-crafted features. KW - Deep Learning KW - herbarium specimens KW - object detection KW - visual recognition KW - Deep Learning KW - Objekterkennung KW - Maschinelles Sehen KW - Pflanzen Y1 - 2020 U6 - https://doi.org/10.1002/aps3.11351 SN - 2168-0450 VL - 8 IS - 6 SP - e11351 PB - Wiley, Botanical Society of America ER - TY - JOUR A1 - Ebigbo, Alanna A1 - Palm, Christoph A1 - Probst, Andreas A1 - Mendel, Robert A1 - Manzeneder, Johannes A1 - Prinz, Friederike A1 - Souza Jr., Luis Antonio de A1 - Papa, João Paulo A1 - Siersema, Peter A1 - Messmann, Helmut T1 - A technical review of artificial intelligence as applied to gastrointestinal endoscopy: clarifying the terminology JF - Endoscopy International Open N2 - The growing number of publications on the application of artificial intelligence (AI) in medicine underlines the enormous importance and potential of this emerging field of research. In gastrointestinal endoscopy, AI has been applied to all segments of the gastrointestinal tract most importantly in the detection and characterization of colorectal polyps. However, AI research has been published also in the stomach and esophagus for both neoplastic and non-neoplastic disorders. The various technical as well as medical aspects of AI, however, remain confusing especially for non-expert physicians. This physician-engineer co-authored review explains the basic technical aspects of AI and provides a comprehensive overview of recent publications on AI in gastrointestinal endoscopy. Finally, a basic insight is offered into understanding publications on AI in gastrointestinal endoscopy. KW - Diagnose KW - Maschinelles Lernen KW - Gastroenterologie KW - Künstliche Intelligenz KW - Barrett's esophagus KW - Deep learning Y1 - 2019 U6 - https://doi.org/10.1055/a-1010-5705 VL - 07 IS - 12 SP - 1616 EP - 1623 PB - Georg Thieme Verlag CY - Stuttgart ER - TY - JOUR A1 - Souza Jr., Luis Antonio de A1 - Mendel, Robert A1 - Strasser, Sophia A1 - Ebigbo, Alanna A1 - Probst, Andreas A1 - Messmann, Helmut A1 - Papa, João Paulo A1 - Palm, Christoph T1 - Convolutional Neural Networks for the evaluation of cancer in Barrett’s esophagus: Explainable AI to lighten up the black-box JF - Computers in Biology and Medicine N2 - Even though artificial intelligence and machine learning have demonstrated remarkable performances in medical image computing, their level of accountability and transparency must be provided in such evaluations. The reliability related to machine learning predictions must be explained and interpreted, especially if diagnosis support is addressed. For this task, the black-box nature of deep learning techniques must be lightened up to transfer its promising results into clinical practice. Hence, we aim to investigate the use of explainable artificial intelligence techniques to quantitatively highlight discriminative regions during the classification of earlycancerous tissues in Barrett’s esophagus-diagnosed patients. Four Convolutional Neural Network models (AlexNet, SqueezeNet, ResNet50, and VGG16) were analyzed using five different interpretation techniques (saliency, guided backpropagation, integrated gradients, input × gradients, and DeepLIFT) to compare their agreement with experts’ previous annotations of cancerous tissue. We could show that saliency attributes match best with the manual experts’ delineations. Moreover, there is moderate to high correlation between the sensitivity of a model and the human-and-computer agreement. The results also lightened that the higher the model’s sensitivity, the stronger the correlation of human and computational segmentation agreement. We observed a relevant relation between computational learning and experts’ insights, demonstrating how human knowledge may influence the correct computational learning. KW - Deep Learning KW - Künstliche Intelligenz KW - Computerunterstützte Medizin KW - Barrett's esophagus KW - Adenocarcinoma KW - Machine learning KW - Explainable artificial intelligence KW - Computer-aided diagnosis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-20126 SN - 0010-4825 VL - 135 SP - 1 EP - 14 PB - Elsevier ER - TY - JOUR A1 - Brown, Peter A1 - Consortium, RELISH A1 - Zhou, Yaoqi A1 - Palm, Christoph T1 - Large expert-curated database for benchmarking document similarity detection in biomedical literature search JF - Database N2 - Document recommendation systems for locating relevant literature have mostly relied on methods developed a decade ago. This is largely due to the lack of a large offline gold-standard benchmark of relevant documents that cover a variety of research fields such that newly developed literature search techniques can be compared, improved and translated into practice. To overcome this bottleneck, we have established the RElevant LIterature SearcH consortium consisting of more than 1500 scientists from 84 countries, who have collectively annotated the relevance of over 180 000 PubMed-listed articles with regard to their respective seed (input) article/s. The majority of annotations were contributed by highly experienced, original authors of the seed articles. The collected data cover 76% of all unique PubMed Medical Subject Headings descriptors. No systematic biases were observed across different experience levels, research fields or time spent on annotations. More importantly, annotations of the same document pairs contributed by different scientists were highly concordant. We further show that the three representative baseline methods used to generate recommended articles for evaluation (Okapi Best Matching 25, Term Frequency–Inverse Document Frequency and PubMed Related Articles) had similar overall performances. Additionally, we found that these methods each tend to produce distinct collections of recommended articles, suggesting that a hybrid method may be required to completely capture all relevant articles. The established database server located at https://relishdb.ict.griffith.edu.au is freely available for the downloading of annotation data and the blind testing of new methods. We expect that this benchmark will be useful for stimulating the development of new powerful techniques for title and title/abstract-based search engines for relevant articles in biomedical research. KW - Information Retrieval KW - Indexierung KW - Literaturdatenbank KW - Dokument KW - Ähnlichkeitssuche KW - Suchmaschine Y1 - 2019 U6 - https://doi.org/10.1093/database/baz085 VL - 2019 SP - 1 EP - 66 PB - Oxford University Pres ER - TY - JOUR A1 - Ebigbo, Alanna A1 - Mendel, Robert A1 - Probst, Andreas A1 - Manzeneder, Johannes A1 - Prinz, Friederike A1 - Souza Jr., Luis Antonio de A1 - Papa, João Paulo A1 - Palm, Christoph A1 - Messmann, Helmut T1 - Real-time use of artificial intelligence in the evaluation of cancer in Barrett’s oesophagus JF - Gut N2 - Based on previous work by our group with manual annotation of visible Barrett oesophagus (BE) cancer images, a real-time deep learning artificial intelligence (AI) system was developed. While an expert endoscopist conducts the endoscopic assessment of BE, our AI system captures random images from the real-time camera livestream and provides a global prediction (classification), as well as a dense prediction (segmentation) differentiating accurately between normal BE and early oesophageal adenocarcinoma (EAC). The AI system showed an accuracy of 89.9% on 14 cases with neoplastic BE. KW - Speiseröhrenkrankheit KW - Diagnose KW - Maschinelles Lernen KW - Barrett's esophagus KW - Deep learning KW - real-time Y1 - 2020 U6 - https://doi.org/10.1136/gutjnl-2019-319460 VL - 69 IS - 4 SP - 615 EP - 616 PB - BMJ CY - London ER - TY - JOUR A1 - Hartmann, Robin A1 - Weiherer, Maximilian A1 - Schiltz, Daniel A1 - Seitz, Stephan A1 - Lotter, Luisa A1 - Anker, Alexandra A1 - Palm, Christoph A1 - Prantl, Lukas A1 - Brébant, Vanessa T1 - A Novel Method of Outcome Assessment in Breast Reconstruction Surgery: Comparison of Autologous and Alloplastic Techniques Using Three-Dimensional Surface Imaging JF - Aesthetic Plastic Surgery N2 - Background Breast reconstruction is an important coping tool for patients undergoing a mastectomy. There are numerous surgical techniques in breast reconstruction surgery (BRS). Regardless of the technique used, creating a symmetric outcome is crucial for patients and plastic surgeons. Three-dimensional surface imaging enables surgeons and patients to assess the outcome’s symmetry in BRS. To discriminate between autologous and alloplastic techniques, we analyzed both techniques using objective optical computerized symmetry analysis. Software was developed that enables clinicians to assess optical breast symmetry using three-dimensional surface imaging. Methods Twenty-seven patients who had undergone autologous (n = 12) or alloplastic (n = 15) BRS received three-dimensional surface imaging. Anthropomorphic data were collected digitally using semiautomatic measurements and automatic measurements. Automatic measurements were taken using the newly developed software. To quantify symmetry, a Symmetry Index is proposed. Results Statistical analysis revealed that there is no dif- ference in the outcome symmetry between the two groups (t test for independent samples; p = 0.48, two-tailed). Conclusion This study’s findings provide a foundation for qualitative symmetry assessment in BRS using automatized digital anthropometry. In the present trial, no difference in the outcomes’ optical symmetry was detected between autologous and alloplastic approaches. KW - Breast reconstruction KW - Breast symmetry KW - Digital anthropometry KW - Mammoplastik KW - Dreidimensionale Bildverarbeitung KW - Autogene Transplantation KW - Alloplastik Y1 - 2020 U6 - https://doi.org/10.1007/s00266-020-01749-4 VL - 44 SP - 1980 EP - 1987 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Römmele, Christoph A1 - Mendel, Robert A1 - Barrett, Caroline A1 - Kiesl, Hans A1 - Rauber, David A1 - Rückert, Tobias A1 - Kraus, Lisa A1 - Heinkele, Jakob A1 - Dhillon, Christine A1 - Grosser, Bianca A1 - Prinz, Friederike A1 - Wanzl, Julia A1 - Fleischmann, Carola A1 - Nagl, Sandra A1 - Schnoy, Elisabeth A1 - Schlottmann, Jakob A1 - Dellon, Evan S. A1 - Messmann, Helmut A1 - Palm, Christoph A1 - Ebigbo, Alanna T1 - An artificial intelligence algorithm is highly accurate for detecting endoscopic features of eosinophilic esophagitis JF - Scientific Reports N2 - The endoscopic features associated with eosinophilic esophagitis (EoE) may be missed during routine endoscopy. We aimed to develop and evaluate an Artificial Intelligence (AI) algorithm for detecting and quantifying the endoscopic features of EoE in white light images, supplemented by the EoE Endoscopic Reference Score (EREFS). An AI algorithm (AI-EoE) was constructed and trained to differentiate between EoE and normal esophagus using endoscopic white light images extracted from the database of the University Hospital Augsburg. In addition to binary classification, a second algorithm was trained with specific auxiliary branches for each EREFS feature (AI-EoE-EREFS). The AI algorithms were evaluated on an external data set from the University of North Carolina, Chapel Hill (UNC), and compared with the performance of human endoscopists with varying levels of experience. The overall sensitivity, specificity, and accuracy of AI-EoE were 0.93 for all measures, while the AUC was 0.986. With additional auxiliary branches for the EREFS categories, the AI algorithm (AI-EoEEREFS) performance improved to 0.96, 0.94, 0.95, and 0.992 for sensitivity, specificity, accuracy, and AUC, respectively. AI-EoE and AI-EoE-EREFS performed significantly better than endoscopy beginners and senior fellows on the same set of images. An AI algorithm can be trained to detect and quantify endoscopic features of EoE with excellent performance scores. The addition of the EREFS criteria improved the performance of the AI algorithm, which performed significantly better than endoscopists with a lower or medium experience level. KW - Artificial Intelligence KW - Smart Endoscopy KW - eosinophilic esophagitis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-46928 VL - 12 PB - Nature Portfolio CY - London ER - TY - JOUR A1 - Roser, David A1 - Meinikheim, Michael A1 - Muzalyova, Anna A1 - Mendel, Robert A1 - Palm, Christoph A1 - Probst, Andreas A1 - Nagl, Sandra A1 - Scheppach, Markus W. A1 - Römmele, Christoph A1 - Schnoy, Elisabeth A1 - Parsa, Nasim A1 - Byrne, Michael F. A1 - Messmann, Helmut A1 - Ebigbo, Alanna T1 - Artificial intelligence-assisted endoscopy and examiner confidence : a study on human–artificial intelligence interaction in Barrett's Esophagus (With Video) JF - DEN Open N2 - Objective Despite high stand-alone performance, studies demonstrate that artificial intelligence (AI)-supported endoscopic diagnostics often fall short in clinical applications due to human-AI interaction factors. This video-based trial on Barrett's esophagus aimed to investigate how examiner behavior, their levels of confidence, and system usability influence the diagnostic outcomes of AI-assisted endoscopy. Methods The present analysis employed data from a multicenter randomized controlled tandem video trial involving 22 endoscopists with varying degrees of expertise. Participants were tasked with evaluating a set of 96 endoscopic videos of Barrett's esophagus in two distinct rounds, with and without AI assistance. Diagnostic confidence levels were recorded, and decision changes were categorized according to the AI prediction. Additional surveys assessed user experience and system usability ratings. Results AI assistance significantly increased examiner confidence levels (p < 0.001) and accuracy. Withdrawing AI assistance decreased confidence (p < 0.001), but not accuracy. Experts consistently reported higher confidence than non-experts (p < 0.001), regardless of performance. Despite improved confidence, correct AI guidance was disregarded in 16% of all cases, and 9% of initially correct diagnoses were changed to incorrect ones. Overreliance on AI, algorithm aversion, and uncertainty in AI predictions were identified as key factors influencing outcomes. The System Usability Scale questionnaire scores indicated good to excellent usability, with non-experts scoring 73.5 and experts 85.6. Conclusions Our findings highlight the pivotal function of examiner behavior in AI-assisted endoscopy. To fully realize the benefits of AI, implementing explainable AI, improving user interfaces, and providing targeted training are essential. Addressing these factors could enhance diagnostic accuracy and confidence in clinical practice. Y1 - 2025 U6 - https://doi.org/10.1002/deo2.70150 VL - 6 IS - 1 PB - Wiley ER - TY - CHAP A1 - Weber, Joachim A1 - Brawanski, Alexander A1 - Palm, Christoph T1 - Parallelization of FSL-Fast segmentation of MRI brain data T2 - 58. Jahrestagung der Deutschen Gesellschaft für Medizinische Informatik, Biometrie und Epidemiologie e.V. (GMDS 2013), Lübeck, 01.-05.09.2013 Y1 - 2013 U6 - https://doi.org/10.3205/13gmds261 N1 - Meeting Abstract IS - DocAbstr. 329 PB - German Medical Science GMS Publishing House CY - Düsseldorf ER - TY - JOUR A1 - Huber, Michaela A1 - Schlosser, Daniela A1 - Stenzel, Susanne A1 - Maier, Johannes A1 - Pattappa, Girish A1 - Kujat, Richard A1 - Striegl, Birgit A1 - Docheva, Denitsa T1 - Quantitative Analysis of Surface Contouring with Pulsed Bipolar Radiofrequency on Thin Chondromalacic Cartilage JF - BioMed Research International N2 - The purpose of this study was to evaluate the quality of surface contouring of chondromalacic cartilage by bipolar radio frequency energy using different treatment patterns in an animal model, as well as examining the impact of the treatment onto chondrocyte viability by two different methods. Our experiments were conducted on 36 fresh osteochondral sections from the tibia plateau of slaughtered 6-month-old pigs, where the thickness of the cartilage is similar to that of human wrist cartilage. An area of 1 cm(2) was first treated with emery paper to simulate the chondromalacic cartilage. Then, the treatment with RFE followed in 6 different patterns. The osteochondral sections were assessed for cellular viability (live/dead assay, caspase (cell apoptosis marker) staining, and quantitative analysed images obtained by fluorescent microscopy). For a quantitative characterization of none or treated cartilage surfaces, various roughness parameters were measured using confocal laser scanning microscopy (Olympus LEXT OLS 4000 3D). To describe the roughness, the Root-Mean-Square parameter (Sq) was calculated. A smoothing effect of the cartilage surface was detectable upon each pattern of RFE treatment. The Sq for native cartilage was Sq=3.8 +/- 1.1 mu m. The best smoothing pattern was seen for two RFE passes and a 2-second pulsed mode (B2p2) with an Sq=27.3 +/- 4.9 mu m. However, with increased smoothing, an augmentation in chondrocyte death up to 95% was detected. Using bipolar RFE treatment in arthroscopy for small joints like the wrist or MCP joints should be used with caution. In the case of chondroplasty, there is a high chance to destroy the joint cartilage. KW - CHONDROCYTE DEATH KW - energy KW - HUMAN ARTICULAR-CARTILAGE KW - MONOPOLAR KW - THERMAL CHONDROPLASTY Y1 - 2020 U6 - https://doi.org/10.1155/2020/1242086 SP - 1 EP - 8 PB - HINDAWI ER - TY - JOUR A1 - Esper, Lukas A1 - Schultheiss, Ulrich A1 - Grad, Marius A1 - Noster, Ulf A1 - Bund, Andreas T1 - Application of the Hull Cell for Identifying Electropolishing Parameters to Adjust Surface Morphology in Additive Manufacturing JF - ECS Advances N2 - Additively processed materials are increasingly used to manufacture customized parts, e.g. medical implants. Implant surfaces often require a smooth finish, which can be achieved by post-processing and well-defined process parameters. In this study, the effects of electropolishing of metal parts produced by laser powder bed fusion are investigated using Hull cell experiments and a three-electrode setup. Current density voltage curves were measured with the three-electrode setup to identify the regimes for electropolishing. Subsequently different constant-currents were applied and Hull cell experiments were conducted. The surface roughness (Sz, Sa) and the mass removal were analysed. Surface morphologies were assessed using laser scanning and scanning electron microscopy. A reduction of the initial surface roughness of more than 90% to Sa < 0.3 μm has been achieved. Considering the passed electrical charge during electropolishing, results from Hull cell experiments are systematically correlated with current-controlled electropolishing. This approach enables the precise tailoring of polishing parameters to achieve surfaces with defined roughness. Furthermore, the study demonstrates the suitability of Hull cells in determining electropolishing parameters for additive materials and highlights their contribution to post-processing in additive manufacturing. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86295 SN - 2754-2734 N1 - Corresponding author der OTH Regensburg: Lukas Esper VL - 4 IS - 4 PB - The Electrochemical Society ER - TY - CHAP A1 - Preiß, Niklas A1 - Westner, Markus T1 - Towards a Taxonomy for Digital Assistant Technologies: Addressing the Jingle-Jangle Fallacies T2 - 38th Bled eConference: empowering transformation: shaping digital futures for all: conference proceedings, 8.-11.6.2025, Bled N2 - This study proposes a unified taxonomy for Digital Assistant Technologies (DATs) to resolve terminological inconsistencies and eliminate »Jingle-Jangle fallacies.« By employing a systematic taxonomy development method on 137 papers, the framework categorizes DATs across four meta-characteristics: AI technology, context, intelligence, and interaction. This taxonomy facilitates the clear differentiation of three primary DAT concepts: assistant, chatbot, and agent. By providing a structured framework, the study enhances conceptual clarity, fosters more focused research, and ensures better alignment of DATs. Y1 - 2025 SN - 9789612869984 U6 - https://doi.org/10.18690/um.fov.4.2025.1 SP - 1 EP - 20 PB - University of Maribor Press ER - TY - JOUR A1 - Schmiedt, Anja Bettina A1 - Neumaier, Stefanie ED - Zinger, Benjamin ED - Wester, Ann Marie ED - Bröker, Thomas T1 - Über die strukturierte Entwicklung digitaler Lehr- und Lernformate mit EMPAMOS – Erkenntnisse aus einem Lehrprojekt JF - Hochschulbildung und Spiel : Lernen motivierend gestalten N2 - Der vorliegende Beitrag diskutiert ausgewählte Schlaglichter eines hybriden Lehr- und Lernprojektes, welches mithilfe von EMPAMOS als Analyse-, Gestaltungs- und Reflexionsinstrument entwickelt und begleitet wurde. Das Lehrprojekt verfolgte das Ziel, hybride und digitale Lehre in einem Kurs zur mathematischen Statistik durch Gamification motivational ansprechend zu gestalten. Hierfür wurde das hybride Lehr- und Lernlabor als ein veränderliches Spielfeld verstanden, mit welchem es umzugehen galt, um stets handlungsfähig zu bleiben und Studierende adäquat auf das Bestehen des Leistungsnachweises vorzubereiten. Dabei konnte die kooperative Spielform als ein zentrales Spielelement identifiziert werden, mit dem sich dieser Auftrag umsetzen ließ. Bei den Studierenden hatte jedoch das immanente motivationale Bedürfnis nach Kompetenzerleben die höchste Priorität. Y1 - 2025 UR - https://www.transcript-verlag.de/978-3-8376-7374-6/ SN - 978-3-8394-7374-0 SP - 121 EP - 136 PB - transcriptVerlag CY - Bielefeld ER - TY - CHAP A1 - Schmiedt, Anja A1 - Sussmann, Monika A1 - Klemcke, Joy ED - Zinger, Benjamin ED - Wester, Ann Marie ED - Bröker, Thomas T1 - Generative Künstliche Intelligenz und Mathematik in der Hochschullehre : ein Rendezvous zwischen Euphorie und Skepsis T2 - Hochschulbildung und Spiel : Lernen motivierend gestalten Y1 - 2025 UR - https://www.transcript-verlag.de/978-3-8376-7374-6/ SN - 978-3-8394-7374-0 SP - 269 EP - 284 PB - transcriptVerlag CY - Bielefeld ER - TY - CHAP A1 - Weber, Karsten ED - Grimm, Petra ED - Zöllner, Oliver T1 - Künstliche Intelligenz am Ende des Lebens BT - Szenarien des KI-Einsatzes zur Prognose und Gestaltung des Sterbens T2 - Ethik der Digitalisierung in Gesundheitswesen und Pflege: Analysen und ein Tool zur integrierten Forschung Y1 - 2025 SN - 978-3-515-13552-8 U6 - https://doi.org/10.25162/9783515135528 SP - 87 EP - 107 PB - Franz Steiner Verlag CY - Stuttgart ER - TY - JOUR A1 - Maier, Johannes A1 - Weiherer, Maximilian A1 - Huber, Michaela A1 - Palm, Christoph T1 - Imitating human soft tissue on basis of a dual-material 3D print using a support-filled metamaterial to provide bimanual haptic for a hand surgery training system JF - Quantitative Imaging in Medicine and Surgery N2 - Background: Currently, it is common practice to use three-dimensional (3D) printers not only for rapid prototyping in the industry, but also in the medical area to create medical applications for training inexperienced surgeons. In a clinical training simulator for minimally invasive bone drilling to fix hand fractures with Kirschner-wires (K-wires), a 3D-printed hand phantom must not only be geometrically but also haptically correct. Due to a limited view during an operation, surgeons need to perfectly localize underlying risk structures only by feeling of specific bony protrusions of the human hand. Methods: The goal of this experiment is to imitate human soft tissue with its haptic and elasticity for a realistic hand phantom fabrication, using only a dual-material 3D printer and support-material-filled metamaterial between skin and bone. We present our workflow to generate lattice structures between hard bone and soft skin with iterative cube edge (CE) or cube face (CF) unit cells. Cuboid and finger shaped sample prints with and without inner hard bone in different lattice thickness are constructed and 3D printed. Results: The most elastic available rubber-like material is too firm to imitate soft tissue. By reducing the amount of rubber in the inner volume through support material (SUP), objects become significantly softer. Without metamaterial, after disintegration, the SUP can be shifted through the volume and thus the body loses its original shape. Although the CE design increases the elasticity, it cannot restore the fabric form. In contrast to CE, the CF design increases not only the elasticity but also guarantees a local limitation of the SUP. Therefore, the body retains its shape and internal bones remain in its intended place. Various unit cell sizes, lattice thickening and skin thickness regulate the rubber material and SUP ratio. Test prints with higher SUP and lower rubber material percentage appear softer and vice versa. This was confirmed by an expert surgeon evaluation. Subjects adjudged pure rubber-like material as too firm and samples only filled with SUP or lattice structure in CE design as not suitable for imitating tissue. 3D-printed finger samples in CF design were rated as realistic compared to the haptic of human tissue with a good palpable bone structure. Conclusions: We developed a new dual-material 3D print technique to imitate soft tissue of the human hand with its haptic properties. Blowy SUP is trapped within a lattice structure to soften rubber-like 3D print material, which makes it possible to reproduce a realistic replica of human hand soft tissue. KW - Dual-material 3D printing KW - Hand surgery training KW - Metamaterial KW - Support material KW - Tissue-imitating hand phantom KW - Handchirurgie KW - 3D-Druck KW - Biomaterial KW - Lernprogramm Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-979 N1 - Corresponding author: Christoph Palm VL - 9 IS - 1 SP - 30 EP - 42 PB - AME Publishing Company ER - TY - JOUR A1 - Maier, Johannes A1 - Weiherer, Maximilian A1 - Huber, Michaela A1 - Palm, Christoph T1 - Optically tracked and 3D printed haptic phantom hand for surgical training system JF - Quantitative Imaging in Medicine and Surgery N2 - Background: For surgical fixation of bone fractures of the human hand, so-called Kirschner-wires (K-wires) are drilled through bone fragments. Due to the minimally invasive drilling procedures without a view of risk structures like vessels and nerves, a thorough training of young surgeons is necessary. For the development of a virtual reality (VR) based training system, a three-dimensional (3D) printed phantom hand is required. To ensure an intuitive operation, this phantom hand has to be realistic in both, its position relative to the driller as well as in its haptic features. The softest 3D printing material available on the market, however, is too hard to imitate human soft tissue. Therefore, a support-material (SUP) filled metamaterial is used to soften the raw material. Realistic haptic features are important to palpate protrusions of the bone to determine the drilling starting point and angle. An optical real-time tracking is used to transfer position and rotation to the training system. Methods: A metamaterial already developed in previous work is further improved by use of a new unit cell. Thus, the amount of SUP within the volume can be increased and the tissue is softened further. In addition, the human anatomy is transferred to the entire hand model. A subcutaneous fat layer and penetration of air through pores into the volume simulate shiftability of skin layers. For optical tracking, a rotationally symmetrical marker attached to the phantom hand with corresponding reference marker is developed. In order to ensure trouble-free position transmission, various types of marker point applications are tested. Results: Several cuboid and forearm sample prints lead to a final 30 centimeter long hand model. The whole haptic phantom could be printed faultless within about 17 hours. The metamaterial consisting of the new unit cell results in an increased SUP share of 4.32%. Validated by an expert surgeon study, this allows in combination with a displacement of the uppermost skin layer a good palpability of the bones. Tracking of the hand marker in dodecahedron design works trouble-free in conjunction with a reference marker attached to the worktop of the training system. Conclusions: In this work, an optically tracked and haptically correct phantom hand was developed using dual-material 3D printing, which can be easily integrated into a surgical training system. KW - Handchirurgie KW - 3D-Druck KW - Lernprogramm KW - Zielverfolgung KW - HaptiVisT KW - Dual-material 3D printing KW - hand surgery training KW - metamaterial KW - tissue imitating phantom hand Y1 - 2020 U6 - https://doi.org/10.21037/qims.2019.12.03 N1 - Corresponding author: Christoph Palm VL - 10 IS - 02 SP - 340 EP - 455 PB - AME Publishing Company CY - Hong Kong, China ER - TY - JOUR A1 - Wöhl, Rebecca A1 - Maier, Johannes A1 - Gehmert, Sebastian A1 - Palm, Christoph A1 - Riebschläger, Birgit A1 - Nerlich, Michael A1 - Huber, Michaela T1 - 3D Analysis of Osteosyntheses Material using semi-automated CT Segmentation BT - a case series of a 4 corner fusion plate JF - BMC Musculoskeletal Disorders N2 - Backround Scaphoidectomy and midcarpal fusion can be performed using traditional fixation methods like K-wires, staples, screws or different dorsal (non)locking arthrodesis systems. The aim of this study is to test the Aptus four corner locking plate and to compare the clinical findings to the data revealed by CT scans and semi-automated segmentation. Methods: This is a retrospective review of eleven patients suffering from scapholunate advanced collapse (SLAC) or scaphoid non-union advanced collapse (SNAC) wrist, who received a four corner fusion between August 2011 and July 2014. The clinical evaluation consisted of measuring the range of motion (ROM), strength and pain on a visual analogue scale (VAS). Additionally, the Disabilities of the Arm, Shoulder and Hand (QuickDASH) and the Mayo Wrist Score were assessed. A computerized tomography (CT) of the wrist was obtained six weeks postoperatively. After semi-automated segmentation of the CT scans, the models were post processed and surveyed. Results During the six-month follow-up mean range of motion (ROM) of the operated wrist was 60°, consisting of 30° extension and 30° flexion. While pain levels decreased significantly, 54% of grip strength and 89% of pinch strength were preserved compared to the contralateral healthy wrist. Union could be detected in all CT scans of the wrist. While X-ray pictures obtained postoperatively revealed no pathology, two user related technical complications were found through the 3D analysis, which correlated to the clinical outcome. Conclusion Due to semi-automated segmentation and 3D analysis it has been proved that the plate design can keep up to the manufacturers’ promises. Over all, this case series confirmed that the plate can compete with the coexisting techniques concerning clinical outcome, union and complication rate. KW - Handchirurgie KW - Osteosynthese KW - Arthrodese KW - 4FC KW - SLAC wrist KW - SNAC wrist KW - Semi-automated segmentation KW - 3D analysis KW - Computertomographie KW - Bildsegmentierung KW - Dreidimensionale Bildverarbeitung Y1 - 2018 U6 - https://doi.org/10.1186/s12891-018-1975-0 VL - 19 SP - 1 EP - 8 PB - Springer Nature ER - TY - JOUR A1 - Gersch, Sebastian A1 - Noster, Ulf A1 - Schulz, Carsten A1 - Bagdahn, Jörg T1 - Influence of the Process-Related Surface Structure of L-PBF Manufactured Components on Residual Stress Measurement Using the Incremental Hole Drilling Method JF - Applied Sciences N2 - Laser Powder Bed Fusion (L-PBF) parts combine geometric freedom with process-induced rough surfaces that challenge residual-stress metrology. We evaluated the accuracy of the incremental hole-drilling (IHD) method with electronic speckle pattern interferometry (ESPI) by applying defined stresses via four-point bending to stress-relieved AlSi10Mg coupons, rather than measuring unknown process stresses. Flat specimens (2 mm, thin per ASTM E837) were analyzed on up-skin, side-skin, and CNC-milled surfaces; thin-specimen calibration coefficients were used. After a preliminary inter-specimen check (three specimens per surface; spread < 8 MPa), one representative specimen per surface was tested with three drill sites to assess intra-specimen uniformity. Measured IHD–ESPI stresses agreed best at 70 MPa: deviations were ~4.1% (up-skin), 6.0% (side-skin), and 6.24% (CNC-milled). At 10 MPa the relative errors increased (23.6%, 18.4%, and 1.40%), consistent with reduced ESPI signal-to-noise and fixture compliance in the low-stress regime. At 140 MPa, deviations rose again (21.1%, 14.3%, and 13.1%), reflecting operation near the ~60% Rp0.2 elastic limit of hole-drilling and potential local plasticity. Surface-dependent artifacts also mattered as follows: the side-skin required no coating and performed comparably to CNC-milled, whereas the up-skin’s roughness plus matting spray introduced fringe distortions and chip/coating debris near the hole. This controlled study indicates that IHD–ESPI can provide reliable results on L-PBF AlSi10Mg in the mid-stress range when surface preparation, coating, and rig compliance are carefully managed. Limitations include excluding down-skin surfaces and testing only one specimen per condition; thus, results should be generalized cautiously. KW - L-PBF KW - residual stress KW - hole drilling method KW - surface roughness KW - surface condition KW - AlSi10Mg Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84929 SN - 2076-3417 VL - 15 IS - 18 PB - MDPI ER - TY - JOUR A1 - Safi, Hila A1 - Bandic, Medina A1 - Niedermeier, Christoph A1 - Almudever, Carmen G. A1 - Feld, Sebastian A1 - Mauerer, Wolfgang T1 - Stacking the odds: full-stack quantum system design space exploration JF - EPJ Quantum Technology N2 - Design space exploration (DSE) plays an important role in optimising quantum circuit execution by systematically evaluating different configurations of compilation strategies and hardware settings. In this paper, we conduct a comprehensive investigation into the impact of various layout methods, qubit routing techniques, and optimisation levels, as well as device-specific properties such as different variants and strengths of noise and imperfections, the topological structure of qubits, connectivity densities, and back-end sizes. By spanning through these dimensions, we aim to understand the interplay between compilation choices and hardware characteristics. A key question driving our exploration is whether the optimal selection of device parameters, mapping techniques, comprising of initial layout strategies and routing heuristics can mitigate device induced errors beyond standard error mitigation approaches. Our results show that carefully selecting software strategies (e.g., mapping and routing algorithms) and tailoring hardware characteristics (such as minimising noise and leveraging topology and connectivity density) significantly improve the fidelity of circuit execution outcomes, and thus the expected correctness or success probability of the computational result. We provide estimates based on key metrics such as circuit depth, gate count and expected fidelity. Our results highlight the importance of hardware–software co-design, particularly as quantum systems scale to larger dimensions, and along the way towards fully error corrected quantum systems: Our study is based on computationally noisy simulations, but considers various implementations of quantum error correction (QEC) using the same approach as for other algorithms. The observed sensitivity of circuit fidelity to noise and connectivity suggests that co-design principles will be equally critical when integrating QEC in future systems. Our exploration provides practical guidelines for co-optimising physical mapping, qubit routing, and hardware configurations in realistic quantum computing scenarios. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85157 N1 - Corresponding author der OTH Regensburg: Hila Safi VL - 12 PB - Springer CY - Heidelberg ER - TY - CHAP A1 - Graf, Julian A1 - Hachani, Murad A1 - Fischer, Sebastian A1 - Hackenberg, Rudolf T1 - A heuristic packet processing model for improved encrypted network analysis T2 - CSCS '25: Proceedings of the 2nd Cyber Security in CarS Workshop N2 - Modern networked systems, such as those in the automotive sector, face increasing complexity and growing attack surfaces due to the rise of interconnected and data-driven technologies. Detecting malicious behavior in these environments requires efficient and scalable methods that can operate reliably despite limited resources and high communication volumes. This paper proposes a heuristic packet processing model designed to support intrusion detection based on structural and temporal characteristics of encrypted network traffic. The model follows a modular architecture consisting of four key phases: recording, sorting, prioritizing, and analyzing. At the core of the approach is the Polymetric Queueing Topology Space, a feature space that combines statistical and time series attributes derived from model structure and flow data. These features serve as input for machine learning models, which can effectively distinguish between benign and intrusion traffic patterns without relying on packet data beyond the transport layer. The approach was evaluated using the publicly available ToN_IoT dataset and demonstrated that reliable classification is achievable using a subset of the developed feature space that contains model-derived traffic features. We used Random Forest for supervised binary and multi-class classification achieving high accuracy scores of 99% for binary and 98% for multi-class classification. Additionally, for unsupervised anomaly detection, we created an Isolation Forest model accomplishing F1-scores of 0.92 for the benign and 0.96 for intrusion class. The architecture is designed to enable dynamic traffic prioritization and to offer a flexible foundation that can observe diverse network domains while maintaining efficient performance under constrained computational conditions. Y1 - 2025 U6 - https://doi.org/10.1145/3736130.3764510 PB - ACM CY - New York, USA ER - TY - JOUR A1 - Diachkova, Yana A1 - Nikolaeva, Sofiya A1 - Guertler, Katherine T1 - Communication in International Humanitarian Relief: Profiling Ukrainian Boundary Spanners JF - Journal of Intercultural Communication N2 - Boundary spanning—the actions and roles individuals or organizations undertake to bridge differences and facilitate communication, collaboration, and understanding across diverse cultural, organizational, or geographical divisions—is an essential element of international cooperation. Set against the backdrop of the Russia-Ukraine war, The purpose of this study is to explore the type of boundary spanning in this uncertain context, the linguistic characteristics of boundary spanners, the necessary skills and competencies required to navigate the complex socio-political landscape, and the role of boundary spanners in humanitarian assistance. This study employs a qualitative research approach, using semi-structured interviews with informants actively engaged in relief efforts and cross-cultural collaboration. The findings emphasized the significance of English as the primary language of communication, the importance of cultural sensitivity and awareness, and the need for intercultural competence in effective boundary spanning. The study concludes with insights from the ongoing Ukrainian experience of bridging geodemographic boundaries and the role of boundary spanners in this process, highlighting key aspects of boundary spanning. Overall, the study contributes to the theoretical background of boundary spanning and enhances the understanding of how linguistic and cultural boundary spanning can drive positive change and improve outcomes in humanitarian aid. The implications of this study suggest that underscore the critical need for collaboration with experienced boundary spanners in educational settings. Y1 - 2025 U6 - https://doi.org/10.36923/jicc.v25i1.1019 SN - 1404-1634 N1 - Corresponding author der Partnerhochschule aus Kiew: Yana Diachkova VL - 25 IS - 1 SP - 98 EP - 106 PB - ICR Publications ER - TY - CHAP A1 - Stocker, Philipp A1 - Lehrer, Tobias A1 - Duddeck, Fabian A1 - Wagner, Marcus T1 - Face-wise prediction of sheet-metal drawability using graph neural networks T2 - Journal of Physics: Conference Series N2 - The early design phase of deep-drawn structural components involves time-consuming iterative development. Traditional drawability assessments rely on finite element simulations, which are computationally expensive and slow the design process. Alternative machine learning (ML) approaches show promise in accelerating this process but face challenges with existing methods. Existing low-dimensional ML models only provide global predictions without identifying specific geometric regions prone to failure. High-dimensional models provide local predictions but require significant amounts of training data. We propose a data-driven approach leveraging graph neural networks (GNNs) for face-wise drawability prediction of sheet metal components in their computer-aided design (CAD) representation. Our method aims to bridge the gap between the computational efficiency of ML and the spatial resolution of simulation by providing face-wise insight into potential failure regions. This study utilises a dataset of parametric U-channel geometries with variability in both geometry and topology. Ground-truth labels are generated using inverse analysis simulations. Geometric entities are represented through the use of UV parameterisations, whereby 3D surfaces are mapped into 2D space to facilitate geometric encoding. Concurrently, the topological relationships are captured using a face adjacency graph. To address data scarcity, we evaluate how different amounts of training data affect model performance and perform ablation studies to analyse the impact of different CAD representation features. Our results show that the proposed approach achieves high accuracy even with limited training data. In addition, the ablation studies provide insights into the most critical CAD features, guiding future research. These results highlight the potential of our GNN to predict face-wise drawability in the early design phase. Y1 - 2025 U6 - https://doi.org/10.1088/1742-6596/3104/1/012053 SN - 1742-6588 N1 - Corresponding author der OTH Regensburg: Philipp Stocker VL - 3104 IS - 1 PB - IOP Publishing ER - TY - JOUR A1 - Tremmel, Florian A1 - Nagler, Oliver A1 - Kutter, Christoph A1 - Holmer, Rainer T1 - Mechanical robustness analysis of semiconductors with a single needle probe card using acoustic emissions JF - e-Journal of Nondestructive Testing N2 - The combination of indentation testing and acoustic emission (AE) is widely used to analyze the fracture toughness of test substrates. In the manufacturing of semiconductor devices this material parameter also plays an important role. During the so-called wafer testing inside a wafer prober small probe tips are pressed onto the chip surface to check its performance. To prevent damaging the chip by that, the fracture toughness and load limit of it has to be defined in a prequalification step. This paper presents a test system that imitates the wafer testing process as close as possible and uses acoustic emission to detect appearing cracks and thereby also the load limit. The frontend of the test setup consists of a modular single needle probe card which can be placed in a wafer prober. Also, the indenter properties (tip diameter, stiffness, etc.) can be adjusted to the probe used later on during productive wafer testing to ensure realistic probing conditions. A piezoelectric sensor and a full strain gauge Wheatstone bridge are implemented close to the single indenter to measure the AEs and the applied contact force respectively. The signal-to-noise-ratios (SNRs) of both sensors are improved with an own analog amplifier module before recording them with an USB oscilloscope. A developed measurement software (LabVIEW) is used to adjust measurement parameters (trigger limit, record length, conversion factors, etc.) and automatically store and separate measurement data from different acoustic events and imprints. To evaluate the result files a second software tool (MATLAB) reads the files out and clusters the recorded events to separate crack signals from electrical and mechanical disturbances. With a prototype first test results are generated and the functionality and accuracy of the measurement concept is proven. KW - Acoustic Emission KW - Crack probability distribution KW - Fracture load limit KW - Wafer testing Y1 - 2024 U6 - https://doi.org/10.58286/30254 SN - 1435-4934 VL - 29 IS - 10 PB - NDT.net ER - TY - JOUR A1 - Lehle, Karla A1 - Philipp, Alois A1 - Krenkel, Lars A1 - Gruber, Michael A1 - Hiller, Karl-Anton A1 - Müller, Thomas A1 - Lubnow, Matthias T1 - Thrombocytopenia During Venovenous Extracorporeal Membrane Oxygenation in Adult Patients With Bacterial, Viral, and COVID-19 Pneumonia JF - ASAIO Journal N2 - Contact of blood with artificial surfaces triggers platelet activation. The aim was to compare platelet kinetics after venovenous extracorporeal membrane oxygenation (V-V ECMO) start and after system exchange in different etiologies of acute lung failure. Platelet counts and coagulation parameters were analyzed from adult patients with long and exchange-free (≥8 days) ECMO runs (n = 330) caused by bacterial (n = 142), viral (n = 76), or coronavirus disease 2019 (COVID-19) (n = 112) pneumonia. A subpopulation requiring a system exchange and with long, exchange-free runs of the second oxygenator (≥7 days) (n = 110) was analyzed analogously. Patients with COVID-19 showed the highest platelet levels before ECMO implantation. Independent of the underlying disease and ECMO type, platelet counts decreased significantly within 24 hours and reached a steady state after 5 days. In the subpopulation, at the day of a system exchange, platelet counts were lower compared with ECMO start, but without differences between underlying diseases. Subsequently, platelets remained unchanged in the bacterial pneumonia group, but increased in the COVID-19 and viral pneumonia groups within 2–4 days, whereas D-dimers decreased and fibrinogen levels increased. Thus, overall platelet counts on V-V ECMO show disease-specific initial dynamics followed by an ongoing consumption by the ECMO device, which is not boosted by new artificial surfaces after a system exchange. Y1 - 2025 U6 - https://doi.org/10.1097/MAT.0000000000002383 SN - 1058-2916 SN - 1538-943X PB - Wolters Kluwer ER - TY - JOUR A1 - Kellner, Florian A1 - Kraft, Sarah Katharina A1 - Quayson, Matthew T1 - Sustainable supplier evaluation under due diligence acts JF - Frontiers in Sustainability N2 - The enactment of due diligence legislation, such as the German Act on Corporate Due Diligence Obligations in Supply Chains, in German Lieferkettensorgfaltspflichtengesetz (LkSG), is reshaping global supply chain management by compelling companies to tackle heightened human rights and environmental risks in their supply chain. This study addresses the need for a comprehensive sustainability supplier evaluation framework by employing a systematic literature review with an expert survey of practitioners from German companies subject to LkSG. This methodology aligns academic findings with real-world practice and legal requirements, enriching the literature with practical insights. The results reveal that business practice prioritizes economic and social dimensions, whereas the literature focuses on economic and environmental dimensions. Although the most relevant economic and environmental criteria are consistent across both domains, the key social criteria show a notable misalignment. Managers can utilize the most relevant sustainability supplier evaluation criteria identified in this study to promote sustainable supply chains and ensure compliance with due diligence requirements. This research also highlights the high relevance of human rights as a social criterion, a dimension that has been historically under-recognized or implicitly addressed in the literature. KW - supplier evaluation KW - supplier selection KW - sustainability criteria KW - due diligence KW - high-risk suppliers KW - supply chain act KW - human rights Y1 - 2025 U6 - https://doi.org/10.3389/frsus.2025.1677700 VL - 6 PB - Frontiers ER - TY - CHAP A1 - Braun, Felicitas A1 - Haug, Sonja A1 - Schneider, Viola ED - Baumgartner, Martin T1 - Needs Assessment for an Assistance System for the Visually Impaired and Blind in Climbing and Bouldering T2 - dHealth 2025 : Proceedings of the 19th Health Informatics Meets Digital Health Conference, 6. + 7. May 2025, Vienna N2 - Background: This thesis deals with the potentials and challenges of climbing for blind and visually impaired people. Objectives: The extent to which an innovative technical assistance system can contribute to supporting this sport in climbing gyms is analyzed. Methods: As part of this study, a needs analysis was carried out using a mixed methods approach. This comprises an observational study, expert interviews and a quantitative survey of the potential target group. Results: The studies show that climbing can promote the development of social and physical skills. Nevertheless, there are needs and challenges, such as finding the next hold on a route. Conclusions: The technical assistance system could provide support by addressing these specific challenges and needs of blind and visually impaired people when climbing and supporting them with acoustic signals. Y1 - 2025 SN - 978-1-64368-592-2 U6 - https://doi.org/10.3233/SHTI324 SP - 29 EP - 34 PB - Sage ; IOS Press ER - TY - CHAP A1 - Galka, Stefan A1 - Weigert, Alexander ED - Schmidt, Thorsten ED - Kühn, Mathias ED - Rank, Sebastian T1 - Systematik zur planungsbegleitenden Simulation bei der Konzeptplanung von Produktionssystemen – ein Anwendungsfall aus der Elektrolysestack-Produktion T2 - Simulation in Produktion und Logistik 2025 N2 - Simulation can support early-stage production system planning by enabling efficient evaluation of concept variants. However, detailed models are often impractical in concept phases due to limited data and high modelling effort. This paper presents a structured three-stage simulation approach for supporting the concept planning of water electrolyzer stack production systems . The approach leverages automatic model generation from formal process descriptions and gradually increases model detail across stages, carried out through a custom-developed simulation framework. This enables early validation of the throughput capability, resource planning, and the analysis of stochastically occurring technical malfunction. The method aims to reduce planning time while improving decision quality. KW - Produktion, Simulation, Petri-Netz Y1 - 2025 SN - 978-3-86780-806-4 U6 - https://doi.org/10.25368/2025.278 SP - 45-1 EP - 45-10 PB - Technische Universität Dresden, Professur für Technische Logistik CY - Dresden ER - TY - CHAP A1 - Galka, Stefan A1 - Meißner, Sebastian ED - Schmidt, Thorsten ED - Rank, Sebastian ED - Kühn, Mathias T1 - Einsatz von Digitalen Zwillingen für die operative Steuerung von innerbetrieblichen Transportsystemen T2 - Simulation in Produktion und Logistik 2025 N2 - This paper presents the architecture and functionality of a simulation-based Digital Twin designed to support decision-making in the control of internal transport systems. The developed Digital Twin leverages a wide range of data from operational information systems to predict future system loads. Specific methods for forecasting transport orders have been developed. An integrated simulation framework enables analysis of potential control decisions, such as resource allocation or the timing of order releases. The simulation results are used for multi-criteria evaluation of the available options for preventive action, thus, providing users with concrete recommendations to support their operational decision-making processes. KW - Digital Twin, Simulation, Logistics Y1 - 2025 SN - 978-3-86780-806-4 U6 - https://doi.org/10.25368/2025.280 SP - 47-1 EP - 47-11 PB - Technische Universität Dresden, Professur für Technische Logistik CY - Dresden ER - TY - JOUR A1 - Schmid, Michael T. A1 - Thiel, Charlotte T1 - Is it worth it? Potential for reducing the environmental impact of bitumen roofing membrane production JF - Recycling N2 - Between 51% and 72% of a bituminous roofing membrane used for structural water-proofing consists of organic material, predominantly bitumen - a derivative of crude oil refining - highlighting the strong dependence of this product on fossil resources. Considering that several tonnes of these membranes must be replaced every 30 to 50 years, substantial potential exists for emission reduction through the establishment of circular material systems. This study investigates this potential by analysing 26 Environmental Product Declarations (EPDs) and life cycle datasets from across Europe covering the period from 2007 to 2023. To ensure comparability, all data were normalised to a declared unit of 1 kg of roofing membrane. The reinforcement layers were categorised into glass and polyester & glass composites, and their differences were examined using Welch’s t-tests. Correlative analyses and linear as well as multiple regression models were then applied to explore relationships between environmental indicators and the shares of organic and mineral mass fractions. The findings reveal that renewable energy sources, although currently representing only a small share of total production energy, provide a major lever for reducing nearly all environmental impact categories. The type of reinforcement layer was also found to influence the demand for fossil resources, both materially and energetically. For most environmental indicators, only multiple regression models can explain at least 30% of the variance based on the proportions of organic and mineral inputs. Overall, the study underscores the crucial importance of high-quality, transparently documented product data for accurately assessing the sustainability of building products. It further demonstrates that substituting fossil energy carriers with renewable sources and optimising material efficiency can substantially reduce environmental burdens, provided that methodological consistency and clarity of indicator definitions are maintained. KW - bitumen sealing KW - bitumen recycling KW - circular construction KW - correlation analysis KW - LCA Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86873 N1 - Corresponding author der OTH Regensburg: Michael Schmid VL - 10 IS - 6 PB - MDPI ER - TY - JOUR A1 - Schiegl, Corina A1 - Schroll-Decker, Irmgard A1 - Kurbel, Matthias T1 - Self-Determination in Patients with Intensive Care Needs: Care Management Implications JF - Journal of Social Policy N2 - Highly vulnerable people, such as those on permanent ventilation, are heavily dependent on medical, nursing and social support. The aim of the treatment of these patients is to make them independent of the ventilators - insofar as there is a po- tential for weaning from ventilation. This requires a considerable amount of time, especially for people with multimorbid diseases. In a clinical setting, the necessary resources for this are not available. In a newly created transitional living form for out-of-hospital ventilation wean- ing, patients are closely supervised and supported in the weaning process by a multidisciplinary team in a homely environment. The transitional housing form is supported by research carried out by the Ostbayerische Technische Hochschule Re- gensburg. The evaluation of self-determination in a complex disease situation is one aspect of this research. This paper is based on a study that included 54 guideline-based, semi-stan- dardised interviews which were conducted with the patients themselves and/or rel- atives covering the aspects of medical and therapeutic care as well as housing and self-determination. The interviews were evaluated using content analysis. In a first step, the categories of the analysis of self-determination are described. Further- more, the results are exemplified with a case study. Results of the study show that the perception of quality of life is closely linked to the possibilities for self-determination. The comprehensive medical, nursing and therapeutic support contributes to the well-being of the sick people, who should be informed about and involved in the treatment. The case study illustrates by way of example how self-determination can be achieved in the case of severely diseased patients (e.g. referring to their mobilisation, visits, spare time activities) and how compliance can be increased. It became evident that even in the case of lethal dis- eases whose progression cannot be influenced, a self-determined life is still possi- ble. KW - Selbstbestimmung KW - Intensivpflegebedarf KW - Care Management Y1 - 2025 U6 - https://doi.org/10.37509/socpol251821149s VL - 18 IS - 21 SP - 159 EP - 168 PB - Ss. Cyril and Methodius University in Skopje, Faculty of Philosophy CY - Skopje ER - TY - JOUR A1 - Schumm, Leon A1 - Brown, Tom A1 - Abdel-Khalek, Hazem A1 - Ueckerdt, Falko A1 - Sterner, Michael A1 - Fioriti, David A1 - Parzen, Max T1 - The impact of temporal hydrogen regulation on hydrogen exporters and their domestic energy transition JF - Nature Communications N2 - As global demand for green hydrogen rises, potential hydrogen exporters move into the spotlight. While exports can bring countries revenue, large-scale on-grid hydrogen electrolysis for export can profoundly impact domestic energy prices and energy-related emissions. Our investigation explores the interplay of hydrogen exports, domestic energy transition and temporal hydrogen regulation, employing a sector-coupled energy model in Morocco. We find substantial co-benefits of domestic carbon dioxide mitigation and hydrogen exports, whereby exports can reduce market-based costs for domestic electricity consumers while mitigation reduces costs for hydrogen exporters. However, increasing hydrogen exports in a fossil-dominated system can substantially raise market-based costs for domestic electricity consumers, but surprisingly, temporal matching of hydrogen production can lower these costs by up to 31% with minimal impact on exporters. Here, we show that this policy instrument can steer the welfare (re-)distribution between hydrogen exporting firms, hydrogen importers, and domestic electricity consumers and hereby increases acceptance among actors. KW - Energy Transition KW - Hydrogen regulation Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84857 N1 - Die Preprint-Version ist ebenfalls in diesem Repositorium verzeichnet unter: https://opus4.kobv.de/opus4-oth-regensburg/7272 VL - 16 PB - Nature CY - London ER - TY - JOUR A1 - Schmiedt, Anja B. A1 - Empacher, Christina A1 - Kamps, Udo T1 - One- and two-sided prediction intervals for future Pareto record values with applications JF - Journal of Statistical Theory and Applications N2 - Based on upper record values in a series of observations over time from a Pareto distribution, an exact and several approximate one-sided and two-sided prediction intervals for the next record value (or for another future record value) to appear are studied and compared by means of an extensive simulation study. The performances of the prediction intervals are evaluated and recommendations are proposed for what method should be used in a given situation with respect to the form of the prediction interval on the one hand and to the tail behaviour on the other. The proposed methods are applied to insurance, environmental and sports data, where the respectively fitted Pareto distributions show a different tail behaviour. As a result, it is seen that although the number of observed record values in the presented real data applications is rather small, as it is usually the case, the selected prediction intervals are of practical use. KW - Interval prediction KW - Pareto distribution KW - Real data analyses KW - Record values KW - Simulation study Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-81605 SN - 2214-1766 N1 - Corresponding author der OTH Regensburg: Anja B. Schmiedt PB - Springer ER - TY - JOUR A1 - Dotter, Caroline A1 - Haug, Sonja A1 - Schnell, Rainer A1 - Raptis, Georgios A1 - Weber, Karsten T1 - Sharing health data for research purposes: results of a population survey in Germany JF - BMC health services research N2 - BACKGROUND: Increased use of health data has the potential to improve both health care and health policies. Several recent policy initiatives at the European and German legislative levels aim to increase the primary and secondary use of health data. However, little is known about general population views on health data access for research. Most studies are based on subsets defined by specific illnesses. METHODS: We commissioned a national computer-assisted dual-frame telephone survey (landline and mobile). Logit estimation models were used to identify predictors of willingness to provide access to health data to different organizations (universities in Germany, universities worldwide, German government organizations, pharmaceutical companies). RESULTS: A high willingness to share health data for research purposes is observed, depending on the specific data recipient. The willingness is highest for research at universities in Germany and German governmental organizations, and lowest regarding research by pharmaceutical companies. The main drivers for sharing health data are the level of trust in public institutions, the respondents' assessment of the seriousness and likelihood of data misuse, and the level of digital literacy. Age, gender, and level of education have small effects and do not determine the willingness to share health data for all organizations. CONCLUSION: We present evidence from a random sample of the German population. The results indicate widespread support among the population for providing access to health data for research purposes. Similar to findings in other countries, the willingness depends strongly on the recipient of the data. This paper evaluates the impact of various determinants - identified in previous qualitative and quantitative research - on the willingness of the German population to share health data. While previous studies have found that patients are generally more willing to share health data, we found that the presence of a medical precondition does not translate into respondents' unequivocal support for health data sharing. We identify privacy concerns, general trust, and digital literacy as key factors influencing the willingness to share health data. Therefore, policymakers and stakeholders need to ensure and communicate the necessary privacy protection measures to increase the willingness of the German population to share health data. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-81622 N1 - Corresponding author der OTH Regensburg: Caroline Dotter VL - 25 PB - BMC ER - TY - CHAP A1 - Richter, Stefanie ED - Middendorf, Tim ED - Parchow, Alexander T1 - (Er)Leben älterer Menschen in Alten-, Pflegeheimen und Wohnstiften : Zukunftsunsicherheit, Übergänge und Lebensalltag T2 - Ältere Menschen in prekären Lebenslagen : Theorien, Handlungsfelder und Fragestellungen für die Soziale Arbeit Y1 - 2025 SN - 978-3-7799-9123-6 U6 - https://doi.org/10.3262/978-3-7799-9123-6 SP - 467 EP - 481 PB - Beltz Juventa CY - Weinheim ER - TY - JOUR A1 - Winter, Lina A1 - Artinger, Annalena A1 - Böck, Hendrik A1 - Ramakrishnan, Vignesh A1 - Reible, Bruno A1 - Albin, Jan A1 - Schüffler, Peter J. A1 - Raptis, Georgios A1 - Brochhausen, Christoph T1 - Developing a smart and scalable tool for histopathological education—PATe 2.0 JF - Journal of Pathology Informatics N2 - Digital microscopy plays a crucial role in pathology education, providing scalable and standardized access to learning resources. In response, we present PATe 2.0, a scalable redeveloped web-application of the former PATe system from 2015. PATe 2.0 was developed using an agile, iterative process and built on a microservices architecture to ensure modularity, scalability, and reliability. It integrates a modern web-based user interface optimized for desktop and tablet use and automates key workflows such as whole-slide image uploads and processing. Performance tests demonstrated that PATe 2.0 significantly reduces tile request times compared to PATe, despite handling larger tiles. The platform supports open formats like DICOM and OpenSlide, enhancing its interoperability and adaptability across institutions. PATe 2.0 represents a robust digital microscopy solution in pathology education enhancing usability, performance, and flexibility. Its design enables future integration of research algorithms and highlights it as a pivotal tool for advancing pathology education and research. Y1 - 2026 U6 - https://doi.org/10.1016/j.jpi.2025.100535 SN - 2153-3539 VL - 20 PB - Elsevier ER - TY - CHAP A1 - Greiner, Nina A1 - Currle, Edda A1 - Bahr, Gudrun A1 - Weber, Karsten ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - Die Rekrutierung von Proband*innen im Projekt DeinHaus 4.0 Oberpfalz BT - Prozess, Herausforderungen und Bewertung T2 - Digitale Technik für ambulante Pflege und Therapie III - Nutzung, Akzeptanz, Wirkung und Lebensqualität N2 - Beschrieben wird der Rekrutierungsprozess im Projekt DeinHaus 4.0. Hierbei werden die spezifischen Herausforderungen bei der Akquise von Schlaganfallbetroffenen aufgezeigt und diskutiert. T3 - Regensburger Beiträge zur Digitalisierung des Gesundheitswesens - 4 KW - Rekrutierung KW - Schlaganfallpatient KW - Forschungsprojekt KW - Telerehabilitation KW - Herausforderungen Y1 - 2024 SN - 978-3-8394-6728-2 U6 - https://doi.org/10.14361/9783839467282-004 SP - 29 EP - 61 PB - transcript CY - Bielefeld ER -