TY - JOUR A1 - Manaranche, Claire A1 - Hornberger, Helga T1 - A proposal for the classification of precious dental alloys according to their resistance to corrosion based on the iso 10271 standard JF - European Cells and Materials N2 - A lot of dental alloys are available on the market. Among these alloys, there are the conventional alloys, the so called casting alloys used without ceramics, the bonding alloys used with high fusing ceramics and the universal alloys used without or with low fusing ceramics. It is im portant to know the physical and mechanical properties of these materials but also their biocompatibility and their resistance to corrosion. Dental alloys are generally placed in the mouth for many years, they must not induce adverse biological reactions such as gingival swelling and erythema, mucosal pain and lichenoid reactions. Although these troubles are often caused not by the materials itself (1, 2), they can be induced by the metallic ions released during their corrosion. In order to decrease the risks to the health, it is necessary to study the corrosion of the dental alloys. Currently, the ISO 10271 Standard (3), describes 3 different corrosion tests: a static immersion test (chemical corrosion), an electrochemic al test and a tarnish test. However, there are no indications yet about the possible interpretation of test results. In this paper, we propose a method to compare and classify the dental alloys in relation to their chemical and electrochemical corrosion results. METHODS: The material tested are pure metals such as gold, palladium, silver, copper and zinc as well as dental alloys which are commercially sold (see Table 1). 54 different materials have been tested. A minimum of four samples of each material were tested by electrochemic al corrosio n and a minimum of three in chemical test. The samples were cast and prepared as indicated by the manufacturer and by the ISO 10271. For the electrochemical test, the samples are in the form of disks 11 mm in diameter. They are tested with a potentiostat/galvanostat Voltalab Model 21. For the chemical test, the samples are rectangular with the dimensions 35X10X1.7 mm. The solution used and the operating conditions are described in the ISO 10271. The concentration of metallic ions released is measured by Induced Coupled Plasma Y1 - 2003 UR - https://www.researchgate.net/publication/242728857_A_proposal_for_the_classification_of_precious_dental_alloys_according_to_their_resistance_to_corrosion_based_on_the_ISO_10271_standard VL - 5 IS - SUPPL. 1 SP - 34 EP - 36 PB - Univ. of Wales CY - Aberystwyth, Wales ER - TY - JOUR A1 - Hornberger, Helga A1 - Weissmann, R. A1 - Lutz, N. T1 - Machining of silica glasses using excimer laser radiation JF - Glastechnische Berichte - Glass Science and Technology Y1 - 1996 VL - 69 IS - 2 SP - 44 EP - 49 ER - TY - JOUR A1 - Wessely, Rainer A1 - Hausleiter, Jörg A1 - Michaelis, Cornelia A1 - Jaschke, Birgit A1 - Vogeser, Michael A1 - Milz, Stefan A1 - Behnisch, Boris A1 - Schratzenstaller, Thomas A1 - Renke-Gluszko, Magdalena A1 - Stöver, Michael A1 - Wintermantel, Erich A1 - Kastrati, Adnan A1 - Schömig, Albert T1 - Inhibition of neointima formation by a novel drug-eluting stent system that allows for dose-adjustable, multiple, and on-site stent coating JF - Arteriosclerosis, Thrombosis, and Vascular Biology N2 - Objective The risk of in-stent restenosis can be considerably reduced by stents eluting cytostatic compounds. We created a novel drug-eluting stent system that includes several new features in the rapidly evolving field of stent-based drug delivery. Methods and Results The aim of the present study was the preclinical evaluation of a stent-coating system permitting individual, on-site coating of stents with a unique microporous surface allowing for individualizable, dose-adjustable, and multiple coatings with identical or various compounds, designated ISAR (individualizable drug-eluting stent system to abrogate restenosis). Stents were coated with 0.75% rapamycin solution, and high-performance liquid chromatography (HPLC)-based determination of drug release profile indicated drug release for >21 days. Rapamycin-eluting microporous (REMP) stents implanted in porcine coronary arteries were safe. To determine the efficacy of REMP stents, this novel drug-eluting stent platform was compared with the standard sirolimus-eluting stent. At 30 days, in-stent neointima formation in porcine coronary arteries was similar in both groups, yielding a significant decrease of neointimal area and injury-dependent neointimal thickness compared with bare-metal stents. Conclusion The ISAR drug-eluting stent platform as a novel concept for stent coating allows for a safe, effective, on-site stent coating process, thus justifying further clinical evaluation to decrease in-stent restenosis in humans. In-stent neointima formation can be successfully attenuated by drug-eluting stents. We introduce a novel conceptual approach for stent-coating that allows for dose-adjustable, on-site stent coating process if desired with multiple compounds. Microporous stents coated with rapamycin proved safe and effective for the limitation of neointima formation in a porcine coronary stent model. KW - drug-eluting stent KW - stent platform KW - sirolimus KW - rapamycin Y1 - 2005 U6 - https://doi.org/10.1161/01.ATV.0000157579.52566.ee SN - 1524-4636 VL - 25 IS - 4 SP - 748 EP - 753 ER - TY - JOUR A1 - Hausleiter, Jörg A1 - Kastrati, Adnan A1 - Wessely, Rainer A1 - Dibra, Alban A1 - Mehilli, Julinda A1 - Schratzenstaller, Thomas A1 - Graf, Isolde A1 - Renke-Gluszko, Magdalena A1 - Behnisch, Boris A1 - Dirschinger, Josef A1 - Wintermantel, Erich A1 - Schömig, Albert T1 - Prevention of restenosis by a novel drug-eluting stent system with a dose-adjustable, polymer-free, on-site stent coating JF - European Heart Journal - Clinical research N2 - Aims Drug-eluting stents (DES) represent a major advance in interventional cardiology. Along with the success shown, current DES also present limitations related to the presence of polymer-coating, fixed drug, and dose used. With the ISAR (Individualized Drug-Eluting Stent System to Abrogate Restenosis) project, a DES system has been developed that permits individualized choice of the drug and dose to use for the given patient. The objective of this prospective dose finding study was to assess the feasibility, safety, and efficacy of a polymer-free on-site stent coating with increasing rapamycin doses. Methods and results In this dose finding study, 602 patients were sequentially enrolled in four groups: microporous bare metal stent (BMS), DES stents coated with a 0.5, 1.0, and 2.0% rapamycin solution. The angiographic in-segment restenosis rate at follow-up angiography was the primary study endpoint. In-segment restenosis was significantly reduced from 25.9% with BMS to 18.9, 17.2, and 14.7% with 0.5, 1.0, and 2.0% rapamycin-eluting stents, respectively (P=0.024). Similarly, the need for target lesion revascularization at 1 year follow-up was reduced from 21.5% with BMS to 16.4, 12.6, and 8.8% with 0.5, 1.0, and 2.0% rapamycin-eluting stents, respectively (P=0.006). Conclusion The placement of polymer-free stents coated on-site with rapamycin is feasible and safe. Furthermore, a dose-dependent efficacy in restenosis prevention is achievable with this new DES concept. KW - Restenosis KW - Stents KW - Randomized KW - Rapamycin KW - Polymer Y1 - 2005 U6 - https://doi.org/10.1093/eurheartj/ehi405 VL - 26 IS - 15 SP - 1475 EP - 1481 ER - TY - CHAP A1 - Weber, Karsten T1 - Der Preis der Informationsfreiheit T2 - Wissen und Bildung in der modernen Gesellschaft Y1 - 2005 UR - https://www.hg-graebe.de/Texte/RLKonf-2005/weber-05-1.pdf PB - Rosa-Luxemburg-Stiftung e.V. CY - Leipzig ER - TY - CHAP A1 - Meyer-Sickendiek, Burkhard A1 - Hussein, Hussein A1 - Baumann, Timo ED - Berton, André ED - Haiber, Udo ED - Minker, Wolfgang T1 - Recognizing Modern Sound Poetry with LSTM Networks T2 - Proceedings of Elektronische Sprachsignalverarbeitung (ESSV) N2 - Our paper focuses on the computational analysis of “readout poetry” (german: Hördichtung) – recordings of poets reading their own work – with regards to the most important type of this genre, the modern “sound poetry” (german: Lautdichtung). Whereas “readout poetry” often uses normal words and sentences, the “sound poetry”, developed by dadaistic poets like Hugo Ball and Kurt Schwitters or concrete poets like Ernst Jandl, Oskar Pastior, or Bob Cobbing, combines the “microparticles of the human voice” like the segments in Ernst Jandls sound poem “schtzngrmm” (“schtzngrmm / schtzngrmm / tttt / tttt / grrrmmmmm / tttt / sch / tzngrmm”). Within the genre of sound poetry, there are two main forms: The lettristic and the syllabic decomposition. A short anecdote will explain this difference: The dadaist Raoul Hausmann developed the lettristic sound poetry in his early dadaistic poem “fmsbw” from 1918. This is said to have inspired his successor Schwitters, whose famous “Ursonate” [The Sonata in Primal Speech] begins with the words “Fümms bö wö tää zää Uu”. With the “Ursonate”, Schwitters developed a syllabic variation of the lettristic poems of Hausmann. The paper shows how to train a bidirectional LSTM network in order to differ between these “dadaistic” sound poems and the “normal” read out poems. In a further step, we will also show how to distinguish between the lettristic and the syllabic decomposition. Based on a bidirectional LSTM network that reads encodings of the character sequence in the poem and uses the output of each directional layer, we identify poems of the sound poetry genre and differentiate between its two types of compositions. The classification results of sound poetry vs. other poetry as well as lettristic vs. syllabic decomposition are with a high performance, yielding a f-scores of 0.86 and 0.84, respectively. KW - Sprachverarbeitung Y1 - 2018 UR - http://www.essv.de/paper.php?id=407 SN - 978-3-959081-28-3 SP - 192 EP - 199 PB - TUDpress CY - Ulm, Germany ER - TY - CHAP A1 - Laumer, Tobias A1 - Schmidt, Michael A1 - Stichel, Thomas T1 - Correlation Analysis of Different Building Parameters on the Part Properties of Parts Built by Simultaneous Laser Beam Melting of Polymers T2 - Fraunhofer Direct Digital Manufacturing Conference DDMC 2016 : Conference Proceedings, March 2016, Berlin N2 - Simultaneous Laser Beam Melting of polymers (SLBM) allows the generation of multi-material components,consisting of different thermoplastic polymers, within one additive building process. Besides the common advantagesof conventional Laser Beam Melting (LBM), multi-material components built by SLBM can fulfill different productrequirements like different chemical resistances or haptic material properties within a single part. To achieve suchparts, different powder materials are deposited next to each other and preheated a few degrees below their meltingtemperatures by infrared emitters and laser radiation (λ = 10.60 μm), before in the last step the preheated powdersare molten simultaneously by an additional laser source (λ = 1.94 μm). In this paper, different polymer powders likepolypropylene (PP) and polyamide 12 (PA12) are used for the generation of multi-material specimens. By varyingdifferent building parameters according to a specified design of experiments, their influence on the part properties isanalyzed. Important building parameters are the intensity and the irradiation time of the laser beam used for meltingthe preheated powders. Besides using tensile tests to determine the tensile strength and the elongation at break, theaverage part height in dependence of the energy input is analyzed. The overall aim is to specify the correlationbetween different building parameters regarding the energy deposition on the resulting part properties. Y1 - 2016 UR - https://www.researchgate.net/publication/298791419_Correlation_Analysis_of_Different_Building_Parameters_on_the_Part_Properties_of_Parts_Built_by_Simultaneous_Laser_Beam_Melting_of_Polymers PB - Fraunhofer Verlag ER - TY - CHAP A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Bock, Thomas A1 - Amend, Philipp A1 - Schmidt, Michael T1 - Characterization of temperature-dependent optical material properties of polymer powders T2 - AIP Conference Proceedings N2 - In former works, the optical material properties of different polymer powders used for Laser Beam Melting (LBM) at room temperature have been analyzed. With a measurement setup using two integration spheres, it was shown that the optical material properties of polymer powders differ significantly due to multiple reflections within the powder compared to solid bodies of the same material. Additionally, the absorption behavior of the single particles shows an important influence on the overall optical material properties, especially the reflectance of the powder bed. Now the setup is modified to allow measurements at higher temperatures. Because crystalline areas of semi-crystalline thermoplastics are mainly responsible for the absorption of the laser radiation, the influence of the temperature increase on the overall optical material properties is analyzed. As material, conventional polyamide 12 and polypropylene as new polymer powder material, is used. By comparing results at room temperature and at higher temperatures towards the melting point, the temperature-dependent optical material properties and their influence on the beam-matter interaction during the process are discussed. It is shown that the phase transition during melting leads to significant changes of the optical material properties of the analyzed powders. KW - laser beam melting KW - material qualification KW - Optical Material Properties KW - Polymers Y1 - 2014 U6 - https://doi.org/10.1063/1.4918508 IS - 1 PB - AIP Publishing ER - TY - JOUR A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Raths, Max A1 - Schmidt, Michael T1 - Analysis of the Influence of Different Flowability on Part Characteristics Regarding the Simultaneous Laser Beam Melting of Polymers JF - Physics Procedia N2 - Powder based Additive Manufacturing technologies offer huge potential for building parts with almost no geometrical restrictions, but both the process controlling as well as the part properties are strongly dependent on different material characteristics of the material, like the flowability. In this work, different weight percentages of nano-scaled silica dioxide particles (Aerosil®) are admixed to pure polyethylene and polypropylene powder and the resulting flowability is determined. Besides using the Hausner ratio as standardized value, the degree of coverage is introduced as a new characteristic to quantify the powder flowability. The degrees of coverage are compared to the Hausner ratios to allow a discussion and evaluation about the different characteristic values. Additionally, tensile bars consisting of polypropylene are generated to determine the porosity by cross sections and the mechanical part properties by tensile testing. As mechanical part properties, the tensile strength and elongation at break are determined and the effects of different powder flowability on these properties are analyzed. KW - additive manufacturing KW - laser beam melting of polymers KW - material qualification Y1 - 2016 U6 - https://doi.org/10.1016/j.phpro.2016.08.098 SN - 1875-3892 SN - 1875-3884 VL - 83 SP - 937 EP - 946 PB - Elsevier ER - TY - JOUR A1 - Stichel, Thomas A1 - Frick, Thomas A1 - Laumer, Tobias A1 - Tenner, Felix A1 - Hausotte, Tino A1 - Merklein, Marion A1 - Schmidt, Michael T1 - A Round Robin study for selective laser sintering of polymers: Back tracing of the pore morphology to the process parameters JF - Journal of Materials Processing Technology N2 - The mechanical properties of polymer parts built by Selective Laser Sintering are strongly related to the internal microstructure which differs with the applied production parameters. The paper focuses on the back tracing of the pore morphology of laser sintered polyamide-12 samples to the process parameters. Therefore, a data base is used which is supplied by a Round Robin initiative and includes mechanical tensile tests and the microstructural analysis of the pore morphology of several different sample charges built with different machines. The pore morphologies (porosity, pore density, pore shape and pore arrangement) measured by X-ray computed tomography are compared and discussed regarding the employed parameters and the resulting mechanical properties. The investigations point out that pore density is a superior indicator than porosity for mechanical issues. This is especially valid along the build direction since pore morphology has shown to be strongly anisotropic. Moreover, the analysis revealed that pore density is strongly affected by the process temperature, which is proved to be essential for the fabrication of mechanical robust parts using Selective Laser Sintering. Y1 - 2018 U6 - https://doi.org/10.1016/j.jmatprotec.2017.10.013 VL - 252 IS - February SP - 537 EP - 545 PB - Elsevier ER - TY - JOUR A1 - Pfingsten, Andrea T1 - Genauigkeit des Lachman Tests zur Feststellung einer Ruptur des vorderen Kreuzbandes BT - Ein systematischer Review über Metaanalysen der letzten fünf Jahre JF - pt - Zeitschrift für Physiotherapeuten N2 - Die Ruptur des vorderen Kreuzbandes (ACL, anterior cruciate ligament) ist die häufigste Bandverletzung des Kniegelenks und kann zu schwerwiegenden Folgen führen. Um diese im Rahmen einer Behandlung oder eines Forschungsprojektes manuell zu diagnostizieren, werden geeignete Assessments benötigt. Der vorliegende systematische Review stellt die vorhandene Evidenz des Lachman-Tests als diagnostisches Verfahren zur Feststellung einer ACL-Ruptur dar. Y1 - 2009 SN - 1614-0397 VL - 61 IS - 2 SP - 108 EP - 123 PB - Pflaum CY - München ER - TY - JOUR A1 - Pfingsten, Andrea A1 - Trickes, Claudia A1 - Max, Susanne A1 - Borgetto, Bernhard T1 - Die Forschungspyramide. Ein Modell zur Bewertung der Evidenz durch Zusammenführung verschiedener Forschungsansätze in einem systematischen Review JF - pt - Zeitschrift für Physiotherapeuten Y1 - 2011 SN - 1614-0397 VL - 63 IS - 10 SP - 16 EP - 18 PB - Pflaum CY - München ER - TY - JOUR A1 - Pfingsten, Andrea T1 - Untersuchung des vorderen Kreuzbandes. Indikation, Ausführung und Interpretation des Lachman-Tests im Rahmen der Befunderhebung des Kniegelenks JF - pt - Zeitschrift für Physiotherapeuten Y1 - 2009 SN - 1614-0397 VL - 61 IS - 2 SP - 38 EP - 40 PB - Pflaum CY - München ER - TY - JOUR A1 - Pfingsten, Andrea T1 - Bewertung der Gesamtevidenz in Reviews. Kombination beobachtender und experimenteller Studien JF - pt - Zeitschrift für Physiotherapeuten Y1 - 2011 SN - 1614-0397 VL - 63 IS - 12 SP - 18 EP - 20 PB - Pflaum CY - München ER - TY - CHAP A1 - Grunow, Dieter A1 - Pfingsten, Andrea A1 - Borgetto, Bernhard ED - Hurrelmann, Klaus ED - Laaser, Ulrich ED - Razum, Oliver T1 - Selbsthilfe T2 - Handbuch Gesundheitswissenschaften Y1 - 2012 SN - 978-3-7799-3857-6 PB - Juventa Verlag CY - Weinheim, München ET - 5. Auflage ER - TY - CHAP A1 - Steffens, Oliver A1 - Suhrke, Michael A1 - Rössler, Ulrich ED - Kramer, Bernhard T1 - Ground state and collective excitations of quantum dots: Correlation effects and Hund’s rule in magnetic field T2 - Advances in Solid State Physics N2 - We review ground-state properties and collective excitations of semiconductor quantum dots in a magnetic field obtained from current-spin density-functional theory. Due to exchange-correlation, a generalized Hund’s rule in magnetic field can be established which leads to spin alignment in partially occupied energy shells at the Fermi energy. This results, in distinct spin structures in single-electron addition spectra. Current-dependent exchange-correlation modifies the magnetic-field dependence of the ground state configuration and leads to deviations from plain spin-density calculations. Moreover it gives rise to spontaneous current textures at zero magnetic field. Collective excitation spectra, explicitly calculated for inelastic light scattering, exhibit novel features in their magnetic field dependence due to a finite ground-state spin density. KW - Spin Density KW - Fermi Energy KW - Collective Excitation KW - Addition Spectrum KW - Inelastic Light Scattering Y1 - 1999 SN - 978-3-540-44553-1 U6 - https://doi.org/10.1007/BFb0107469 VL - 39 SP - 111 EP - 120 PB - Friedr. Vieweg & Sohn CY - Braunschweig ER - TY - CHAP A1 - Görtler, Michael ED - Görtler, Michael ED - Lotz, Mathias ED - Partetzke, Marc ED - Poma, Sara Poma ED - Winckler, Marie T1 - Herausforderungen einer kritischen politischen Bildung T2 - Kritische politische Bildung: Standpunkte und Perspektiven N2 - In der politischen Bildung wird die Debatte um eine kritische politische Bildung erneut geführt. Im Fokus der Debattenbeiträge stehen unterschiedliche Vorstellungen hinsichtlich Notwendigkeit, Begründung, Ziele, Inhalte und Methoden einer kritischen politischen Bildung im schulischen wie außerschulischen Bereich. Dieser Band zeigt unterschiedliche Standpunkte und Forschungsperspektiven auf, wie sie diesbezüglich auf der GPJE-Nachwuchstagung im Frühjahr 2016 an der Universität Bremen diskutiert worden sind. Der Band gliedert sich in drei Teile. Der erste umfasst theoretische wie konzeptionelle Beiträge. Im zweiten Teil steht die empirische Forschung im Mittelpunkt. Im dritten Teil werden schließlich die politisch-bildnerische Praxis und deren Reflexion thematisiert. Insgesamt werfen die Beiträge einen differenzierten Blick auf die Debatte um den Gehalt einer kritischen politischen Bildung. Dabei setzen sich die Autorinnen und Autoren mit Argumenten aus der aktuellen Diskussion auseinander und beleuchten blinde Flecken. KW - Diskurs KW - Perspektive KW - Politische Bildung KW - Standort Y1 - 2017 SN - 978-3-7344-0420-7 SP - 123 EP - 135 PB - Wochenschau Verl. CY - Schwalbach/Ts. ER - TY - JOUR A1 - Borrmann, André A1 - Schorr, Markus A1 - Obergrießer, Mathias A1 - Ji, Yang A1 - Wu, I-Chen A1 - Günthner, Willibald A. A1 - Euringer, Thomas A1 - Rank, Ernst ED - Caldas, Carlos H. ED - O'Brien, William J. T1 - Using product data management systems for civil engineering projects - Potentials and obstacles JF - Computing in civil engineering : proceedings of the 2009 ASCE International Workshop on Computing in Civil Engineering ; June 24 - 27, 2009, Austin, Texas Y1 - 2009 VL - 346 SP - 359 EP - 369 PB - ASCE ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Erwachsenenbildung und Zeit JF - Zeitschrift für Weiterbildungsforschung (ZfW) N2 - Der Beitrag fokussiert die Bedeutung von Zeit für die politische Erwachsenenbildung. Angesichts aktueller soziokultureller und sozioökonomischer Herausforderungen - besonders: der Ökonomisierung und Beschleunigung im Kontext von Bildung und Lernen - ergeben sich eine ganze Reihe von drängenden Zeitfragen. Der Bedeutung von Zeit wird in der Erwachsenenbildung und der Politischen Bildung jedoch bisher wenig Aufmerksamkeit geschenkt. Aus diesem Grund wird diese Fragestellung im Beitrag vertieft. Erstens werden die Situation der politischen Erwachsenenbildung und zweitens der Forschungsstand untersucht. Ausgehend von den Befunden werden drittens drei Zugänge herausgearbeitet, welche die Bedeutung von Zeit für die politische Erwachsenenbildung sichtbar machen: Politische Bildung als Prozess und Verzögerung sowie Zeit als Gegenstand, um die Zeitlichkeit von Gesellschaft und Politik zu verstehen und zu beurteilen, um sich an der Gestaltung der Zeitstrukturen zu beteiligen. Der Beitrag endet mit einem Ausblick und offenen Fragen, die sich an die zeittheoretischen Überlegungen anschließen. The article focusses on the importance of time for the political adult education. Current socio-cultural and socio-economic challenges – in particular: the commodification and acceleration in the context of education and learning – results in a wide range of pressing time issues. However the adult education und the political education pay little attention to the importance of time. For this reason, this issue will be deepened in the article. First, the situation of the political adult education and secondly, the state of research are examined. On the base of the findings, three approaches are pointed out, which emphasize the importance of time for the political adult education: political education as a process and as a deceleration and also as a subject to understand and judge the temporality of politics and society as a necessary condition to participate in shaping the time structures. The paper ends with an outlook and open-ended questions, which adjoin the time theoretical considerations. KW - Acceleration KW - Adult education KW - Forschungsbericht KW - Lernen KW - Political education KW - Politische Erwachsenenbildung KW - Time Y1 - 2016 U6 - https://doi.org/10.1007/s40955-016-0052-2 IS - 1 SP - 9 EP - 25 PB - Springer ER - TY - JOUR A1 - Görtler, Michael T1 - Migration als Herausforderung der politischen Bildung. Bildungspraxis zwischen Vermittlungs- und Präventionsfunktion JF - Erwachsenenbildung: Vierteljahresschrift für Theorie und Praxis N2 - Dieser Beitrag ist als Theorie-Praxis-Reflexion ausgelegt, die auf einem Vortrag mit anschließender Gruppendiskussion mit Bildungspraktikern der katholischen Erwachsenenbildung basiert. Im Mittelpunkt steht die Frage, welche Aufgaben sich für die politische Bildungsarbeit mit Erwachsenen in der momentanen Situation ergeben. KW - Europa KW - Flüchtling KW - Katholische Erwachsenenbildung KW - Krise KW - Teilnehmer Y1 - 2016 U6 - https://doi.org/10.13109/erbi.2016.62.3.128 SN - 0341-7905 SN - 2365-4953 VL - 62 IS - 3 SP - 128 EP - 130 PB - Vandenhoeck & Ruprecht CY - Göttingen ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Bildung in unruhigen Zeiten? Ein Beispiel für eine Theorie-Praxis-Reflexion JF - forum erwachsenenbildung KW - Evangelische Erwachsenenbildung KW - Politische Bildung KW - Tagungsbericht KW - Theorie-Praxis-Beziehung Y1 - 2016 UR - https://www.waxmann.com/waxmann-zeitschriften/waxmann-zeitschriftendetails/?tx_p2waxmann_pi2[zeitschrift]=ZEI1028&tx_p2waxmann_pi2[ausgabe]=AUG100240&tx_p2waxmann_pi2[artikel]=ART101908&tx_p2waxmann_pi2[action]=artikel SN - 1433-769X VL - 49 IS - 2 SP - 48 EP - 49 PB - Waxmann CY - Münster ER - TY - JOUR A1 - Görtler, Michael T1 - Unzufriedene Demokraten und Radikalisierung als Herausforderung für die politische Bildung JF - Politische Bildung: Journal für politische Bildung KW - Demokratie KW - Fremdenfeindlichkeit KW - Politische Bildung KW - Radikalismus Y1 - 2015 SN - 2191-8244 SN - 2749-4888 IS - 4: Unzufriedene Demokraten - radikalisierte Überzeugungen SP - 34 EP - 42 PB - Wochenschau Verlag CY - Frankfurt am Main ER - TY - JOUR A1 - Görtler, Michael T1 - Dem Rechtspopulismus begegnen. Drei bildungspraktische Thesen JF - forum erwachsenenbildung KW - Erwachsenenbildung KW - Populismus Y1 - 2017 UR - https://www.waxmann.com/index.php?eID=download&id_artikel=ART102163&uid=frei SN - 1433-769X VL - 50 IS - 2 SP - 43 EP - 44 PB - Waxmann ER - TY - JOUR A1 - Görtler, Michael T1 - Was ist politische Bildung? JF - Praxis Gemeindepädagogik KW - Didaktik KW - Geschichte (Histor) KW - Konzept KW - Politische Bildung KW - Theorie Y1 - 2014 SN - 1860-6946 VL - 67 IS - 1 SP - 11 EP - 14 PB - Evangelische Verlagsanstalt CY - Leipzig ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Bildung in Zeiten des Rechtspopulismus. Pädagogische und fachdidaktische Ansätze zum Umgang mit einer gegenwärtigen Bedrohung für den Frieden JF - Vierteljahrsschrift für wissenschaftliche Pädagogik N2 - Right-wing populism challenges the societies in Europe. The rise of such movements and parties are a threat to peace and democracy in Germany. This article focuses the possibilities as well as the boundaries of political education under the current circumstances. To this end, it discusses theoretical explanations based on approaches in peace education, political didactics and social sciences to deal with right-wing populism in practice. (DIPF/Orig.). T2 - Political education in times of right-wing populism : Pedagogical and didactical approaches to deal with a current threat to peace KW - Begriff KW - Demokratie KW - Fachdidaktik KW - Frieden KW - Friedenspädagogik KW - Pädagogik KW - Politische Bildung KW - Populismus KW - Sozialwissenschaften Y1 - 2019 U6 - https://doi.org/10.30965/25890581-09501006 SN - 2589-0581 VL - 95 IS - 1 SP - 61 EP - 73 PB - Brill ER - TY - BOOK A1 - Görtler, Michael T1 - Politische Bildung und Zeit BT - Eine didaktische Untersuchung zur Bedeutung von Zeit für die politische Bildung N2 - Michael Görtler richtet in dieser Untersuchung den Fokus auf die Bedeutung von Zeit für die politische Bildung, da die Zeitlichkeit politischer Bildungsprozesse und demokratischer Politik in der Didaktik der politischen Bildung bisher kaum beachtet wurde. Der Autor verkleinert diese Lücke, erweitert den Fachdiskurs und gibt praktische Impulse für die politische Bildungsarbeit. Im Mittelpunkt steht die Frage nach dem expliziten wie impliziten Sichtbarwerden der Zeit in Ansätzen der Didaktik der politischen Bildung und der Bildungs- und Sozialwissenschaften. Dabei wird auch geprüft, welche didaktischen Herausforderungen in Bezug auf die Ziele, Inhalte und die Gestaltung von Lehr- und Lernprozessen auf der Subjekt- und Objektseite sowie in der Vermittlung zwischen beiden Seiten beachtet werden müssen. KW - Didaktik KW - Lehr-Lern-Prozess KW - Politische Bildung KW - Zeitbewusstsein KW - Zeit KW - Beschleunigung KW - Demokratie KW - Nachhaltige Entwicklung KW - Kritische politische Bildung Y1 - 2016 SN - 3-658-14194-8 U6 - https://doi.org/10.1007/978-3-658-14194-3 PB - Springer CY - Wiesbaden ER - TY - JOUR A1 - Görtler, Michael T1 - Die Beschleunigung von Lebenswelt und Politik - Gegenstand kritischer politischer Bildung und Thema des Politikunterrichts JF - Polis KW - Beschleunigung KW - Bildungspolitik KW - Bildungsziel KW - Demokratie KW - Deutschland KW - Lebenswelt KW - Politik KW - Politische Bildung KW - Politisches System KW - Sozialwissenschaftlicher Unterricht Y1 - 2013 SN - 1611-373X VL - 17 IS - 2 SP - 22 EP - 26 PB - Wochenschau Verlag ER - TY - JOUR A1 - Schöberl, Cora A1 - Görtler, Michael T1 - Politische Bildungsarbeit unter widrigen Bedingungen? Empirische Perspektiven auf die Praxis JF - Erwachsenenbildung - EB : Vierteljahresschrift für Theorie und Praxis N2 - In diesem Beitrag werden empirische Perspektiven auf die politische Bildungspraxis mit Erwachsenen in Zeiten von Angst und Unsicherheit diskutiert. Dabei liegt die Annahme zugrunde, dass politische Bildungsarbeit mit Erwachsenen unter widrigen Bedingungen geleistet werden muss. Dieser Standpunkt stützt sich einerseits auf den Fachdiskurs, Positionspapiere von Fachverbänden und Erfahrungsberichte, andererseits auf die Ergebnisse aus qualitativen Untersuchungen der Verfasserin und des Verfassers dieses Beitrags. KW - Angst KW - Bildungsangebot KW - Bildungsarbeit KW - Erwachsenenbildung KW - Gesellschaft KW - Politische Bildung KW - Populismus Y1 - 2019 U6 - https://doi.org/10.13109/erbi.2019.65.3.124 SN - 2365-4953 VL - 65 IS - 3 SP - 124 EP - 127 PB - Vandenhoeck & Ruprecht ER - TY - CHAP A1 - Görtler, Michael ED - Moegling, Klaus ED - Hadeler, Swantje ED - Hund-Göschel, Gabriel T1 - Zur Bedeutung von Zeit für gute Schulen T2 - Was sind gute Schulen? Teil 1. Konzeptionelle Überlegungen und Diskussion N2 - Der vorliegende Beitrag stellt schulpädagogische Überlegungen zur Bedeutung von Zeit für gute Schulen an. Anhand von theoretischen und praktischen Ansätzen wird der Frage nachgegangen, welche Rolle Zeit beim Lehren und Lernen spielt und welche Konsequenzen sich daraus aus der Perspektive der Schulpädagogik ziehen lassen. N2 - This paper presents considerations on the importance of time for good schools from the perspective of school pedagogics. The role of time for teaching and learning as well as the consequences to be drawn will be discussed from the perspective of school pedagogics on the basis of theoretical and practical approaches. T2 - The meaning of time for good schools KW - Freizeit KW - Ganztagsunterricht KW - Schulalltag KW - Schule KW - Schulpädagogik KW - Tagesablauf KW - Unterrichtszeit KW - Zeit KW - Zeitbudget Y1 - 2016 SN - 3-934575-88-9 SP - 280 EP - 290 PB - Prolog-Verlag CY - Immenhausen bei Kassel ER - TY - CHAP A1 - Görtler, Michael ED - Lotz, Mathias ED - Pohl, Kerstin T1 - Politik, Bildung, Beschleunigung: Überlegungen zur Bedeutung einer Zeit-Diagnose für die politische Bildung T2 - Gesellschaft im Wandel!? Neue Herausforderungen für die politische Bildung und ihre Didaktik Y1 - 2019 SN - 978-3-7344-0827-4 SP - 61 EP - 68 PB - Wochenschau Verlag CY - Frankfurt/M. ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Sozialisation und politische Bildung JF - Politische Bildung KW - Außerschulische Jugendbildung KW - Jugend KW - Politische Bildung KW - Politische Sozialisation Y1 - 2013 IS - 3 SP - 8 EP - 13 PB - Wochenschau Verlag ER - TY - JOUR A1 - Schöberl, Cora A1 - Görtler, Michael T1 - »Wir müssen auch über uns reden! Migration, Rechtspopulismus und Erwachsenenbildung.« JF - DIE – Zeitschrift für Erwachsenenbildung N2 - In diesem Beitrag werden empirische Perspektiven auf die politische Bildungspraxis mit Erwachsenen in Zeiten von Angst und Unsicherheit diskutiert. Dabei liegt die Annahme zugrunde, dass politische Bildungsarbeit mit Erwachsenen unter widrigen Bedingungen geleistet werden muss. Dieser Standpunkt stützt sich einerseits auf den Fachdiskurs, Positionspapiere von Fachverbänden und Erfahrungsberichte, andererseits auf die Ergebnisse aus qualitativen Untersuchungen der Verfasserin und des Verfassers dieses Beitrags. Y1 - 2019 VL - 65 IS - 3 PB - Vandenhoeck & Ruprecht CY - Böhlau ER - TY - CHAP A1 - Görtler, Michael ED - Bobrowska, Ewa ED - Gierszewski, Dorota ED - Kluzowicz, Julia T1 - Politische Bildung und Rechtspopulismus in der Migrationsgesellschaft T2 - Civic education in the context of migration / Politische Bildung im Kontext der Migration Y1 - 2018 SN - 978-83-233-4506-0 PB - Jagiellonian University Press CY - Krakau ER - TY - JOUR A1 - Görtler, Michael T1 - Widersprüche professionellen Handelns: Situative Anforderungen zwischen Fach- und Sozialbezug in der Weiterbildungsberatung JF - Weiterbildung - Zeitschrift für Grundlagen, Praxis und Trends Y1 - 2019 SN - 1861-0501 IS - 1 PB - Luchterhand CY - München ER - TY - JOUR A1 - Görtler, Michael T1 - Zur Diskussion: Kinder- und Jugendhilfe mit Geflüchteten. Professionelles Handeln unter schwierigen Bedingungen JF - Unsere Jugend N2 - Im Fach- und Praxisdiskurs der Kinder- und Jugendhilfe findet sowohl die Situation Geflüchteter als auch die der darin tätigen Sozialarbeiterinnen und Sozialarbeiter vergleichsweise wenig Beachtung. Insbesondere die Widersprüche, die beim professionellen Handeln auftreten, werden kaum thematisiert. KW - Flüchtling KW - Jugendhilfe KW - Sozialarbeiter Y1 - 2019 U6 - https://doi.org/10.2378/uj2019.art14d SN - 0342-5258 VL - 71 IS - 2 SP - 89 EP - 93 PB - Reinhardt CY - München ER - TY - JOUR A1 - Görtler, Michael T1 - Beratung und Bildung in der Migrationsgesellschaft. Eine gemeinsame Aufgabe von Erwachsenenpädagogik und Sozialpädagogik? JF - Erwachsenenbildung KW - Bildungsberatung KW - Einwanderer KW - Erwachsenenbildung KW - Multikulturelle Gesellschaft KW - Sozialpädagogik Y1 - 2018 U6 - https://doi.org/10.13109/erbi.2018.64.1.27 SN - 0341-7905 IS - 1 SP - 31 EP - 33 PB - Vandenhoeck & Ruprecht CY - Göttingen ER - TY - CHAP A1 - Görtler, Michael ED - Görtler, Michael ED - Reheis, Fritz T1 - Politikdidaktik und Zeit T2 - Reifezeiten: Zur Bedeutung der Zeit in Bildung, Politik und politischer Bildung KW - Zeitdruck KW - Zeitwahrnehmung KW - Schule KW - Hochschule KW - Politik Y1 - 2012 SN - 3-89974-781-X SN - 978-3-89974-781-2 SP - 193 EP - 208 PB - Wochenschau Verl. CY - Schwalbach, Taunus ER - TY - JOUR A1 - Görtler, Michael T1 - Sozialraumorientierte politische Bildung – Didaktische Überlegungen zu einem politisch-bildenden Handlungskonzept der Sozialen Arbeit JF - sozialraum.de Y1 - 2018 UR - https://www.sozialraum.de/sozialraumorientierte-politische-bildung.php SN - 1868-2596 VL - 10 IS - 1 PB - socialnet CY - Bonn ER - TY - JOUR A1 - Görtler, Michael T1 - Schwierige Übergänge: Überlegungen zum Studium der Sozialen Arbeit und zum Berufseinstieg als Sozialarbeiter JF - Forum für Kinder- und Jugendarbeit Y1 - 2017 UR - https://www.kinder-undjugendarbeit.de/fileadmin/user_upload/FORUM_2017/Teil_1_Forum_4_2017.pdf SN - 1434-4696 IS - 4 SP - 9 EP - 12 PB - Verband Kinder- und Jugendarbeit CY - Hamburg ER - TY - RPRT A1 - Michael Sterner, A1 - Mareike Jentsch, A1 - Uwe Holzhammer, T1 - Energiewirtschaftliche und ökologische Bewertung eines Windgas-Angebotes N2 - In this technical report, (1) the benefits of the new technology for future energy supply are discussed, (2) the climate protection effect of wind gas is discussed, and (3) a reasonable use of wind energy for gas generation is analyzed. In particular, windgas in the heat market is discussed in the utilization cascade of wind energy. The new "power-to-gas" concept opens up completely new possibilities for the integration of renewable energies and for coupling the electricity and gas grids. The Sabatier process, which has been known for 100 years, was first developed for this purpose in 2008 under the leadership of the Center for Solar Energy and Hydrogen Research and Fraunhofer IWES (formerly ISET) with electrolysis to create the "power-to-gas" concept for energy storage. A first pilot plant was built by ZSW Stuttgart on behalf of SolarFuel in 2009. This plant proves the technical feasibility of the new technology. Renewable gas is stored, transported and used as required as control and reserve energy via reconversion, e.g. in combined cycle power plants. In this way, decentrally generated renewable electricity is converted into a CO2 -neutral energy carrier with high energy density. The key advantage of renewable methane is the use of existing infrastructure such as gas grids, gas storage and end-use equipment for the integration of renewable energy. Technologies for natural gas are state of the art and commercially available. Methane also has three times the energy density of hydrogen. T2 - Energy-economic and ecological evaluation of a windgas offer (Power-to-Gas) Y1 - 2011 U6 - https://doi.org/10.13140/RG.2.2.25093.68328 PB - Fraunhofer Institute for Energy Economics and Energy System Technology CY - Kassel ER - TY - CHAP A1 - Haug, Sonja ED - Haug, Sonja ED - Swiaczny, Frank T1 - Migration aus Mittel- und Osteuropa nach Deutschland BT - Trends und Emigrationspotential unter besonderer Berücksichtigung von Bulgarien T2 - Migration in Europa N2 - Im Zuge der EU-Ost-Erweiterung sind im Mai 2004 zehn Länder der EU beigetreten. Bulgarien und Rumänien sollen im Jahr 2007 folgen. Dieser Beitrag befasst sich mit der aktuellen und zukünftigen Entwicklung der Migration aus den mittel- und osteuropäischen EU-Beitrittsländern (MOEL) mit einem Schwerpunkt auf Bulgarien. Hierbei werden Ergebnisse des EU-Twinning-Light-Projektes „External Migration in Bulgaria – Analysing the development and consequences of the migration process” vorgestellt. Es wird ein Überblick über die Datenlage zur Migration zwischen den MOEL und Deutschland einerseits und zwischen Bulgarien und der EU bzw. Deutschland andererseits gegeben, wobei methodische Aspekte und die Datenqualität bewertet werden. Vorhersagen zukünftiger Migration werden anhand ökonomischer Schätzungen und Befragungen zum Migrationspotenzial dargelegt und kritisch beurteilt. Ausführlich wird auf Ergebnisse des bulgarischen Zensus 2001 zum Emigrationspotential in der Bevölkerung eingegangen. Das Migrationspotenzial der MOEL, die Konsequenzen für die Herkunftsländer unter dem Gesichtspunkt eines möglichen „Brain Drains“ und die Steuerungsmöglichkeiten werden diskutiert. Y1 - 2005 UR - https://nbn-resolving.org/urn:nbn:de:0168-ssoar-331157 SP - 133 EP - 151 ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland T1 - Example 4: Strengthening a reinforced concrete column by wrapping T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstofffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 115 EP - 125 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - BOOK A1 - Haug, Sonja T1 - Menschen mit Migrationshintergrund BT - Theorie und Empirie der Migration Y1 - 2009 PB - Hamburger Fern-Hochschule (HFH) CY - Hamburg ER - TY - CHAP A1 - Rill, Daniel A1 - Butz, Christiane A1 - Rill, Georg ED - Kecskeméthy, Andrés ED - Geu Flores, Francisco T1 - Dynamic Interaction of Heavy Duty Vehicles and Expansion Joints T2 - Multibody Dynamics 2019, Proceedings of the 9th ECCOMAS Thematic Conference on Multibody Dynamics N2 - The “Smart Bridge (Intelligente Brücke)” project cluster, initiated by the German Federal Highway Research Institute (Bundesanstalt für Straßenwesen, BASt) and the Federal Ministry of Transport and Digital Infrastructure (BMVI), focuses on “smart” monitoring devices that allow an efficient and economic maintenance management of bridge infrastructures. Among the participating projects, the one presented herein focuses on the development of a smart expansion joint, to assess the traffic parameters on site. This is achieved by measuring velocity and weight of crossing vehicles. In reference measurements, performed with a three-axle truck and a typical tractor semi-trailer combination with five axles in total, it was shown that the interaction between the vehicle and the expansion joint is highly dynamic and depends on several factors. To get more insight into this dynamic problem, a virtual test rig was set up. Although nearly all vehicle parameters had to be estimated, the simulation results conform very well with the measurements and are robust to vehicle parameter variations. In addition, they indicate a significant influence of the expansion joint dynamic to the peak values of the measured wheel loads, in particular on higher driving velocities. By compensating the relevant dynamic effects in the measurements, a “smart” data processing algorithm makes it possible to determine the actual vehicle weights in random traffic with reliability and appropriate accuracy. Y1 - 2020 SN - 978-3-030-23131-6 U6 - https://doi.org/10.1007/978-3-030-23132-3_56 VL - 53 SP - 471 EP - 478 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland A1 - Schmitt, Alexander A1 - Zilch, Konrad ED - Zilch, Konrad T1 - Beispiel 3: Verstärkung eines Plattenbalkens mit aufgeklebten CFK-Lamellen T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 83 EP - 108 PB - Beuth CY - Berlin ER - TY - JOUR A1 - Linner, Thomas A1 - Seelinger, Anja A1 - Vogt Lydia, A1 - Schäpers Barbara, A1 - Steinböck, Martina A1 - Krewer, Carmen A1 - Bock, Thomas T1 - REACH: Solutions for Technology-Based Prevention and Empowerment for Older People and their Caregivers JF - Journal of Population Ageing: Special Issue on responsive engagement of older persons promoting activity and customized healthcare N2 - REACH stands for “Responsive Engagement of the Elderly Promoting Activity and Customized Healthcare”. Sustained physical activity matters greatly to the health and well-being of older people and significantly improves their chance of maintaining independent living. It can make a difference across the whole care continuum as well as in almost every setting. Therefore, REACH solutions focus on the systematic, target-oriented increase of physical activity of older people, and tackle the whole prevention spectrum (primary, secondary, and tertiary). It seeks to empower older people and their formal and informal caregivers, and works towards viable solutions for both the formal and in-formal care sector. Technology-based personalization of prevention, activation, and care services provided in various living and care settings is at the center of the developed solutions. Ideally toolkit approach would allow for the tailoring of solutions that create value for end-users, care providers and health care payers alike through the combination, integration and adaptation/re-design elements towards the different contexts of different countries, different payment and reimbursement structures. This Special Issue sheds light on such solutions, their conception, their development, and their testing. Y1 - 2020 U6 - https://doi.org/10.1007/s12062-020-09268-5 VL - 13 IS - 1 SP - 131 EP - 137 PB - Springer Nature ER - TY - CHAP A1 - Baumann, Timo A1 - Siegert, Ingo ED - Alt, Florian ED - Schneegass, Stefan ED - Hornecker, Eva T1 - Prosodic addressee-detection : ensuring privacy in always-on spoken dialog systems T2 - Tagungsband Mensch und Computer (MuC'20): 06.09.2020 - 09.09.2020, Magdeburg N2 - We analyze the addressee detection task for complexity-identical dialog for both human conversation and device-directed speech. Our recurrent neural model performs at least as good as humans, who have problems with this task, even native speakers, who profit from the relevant linguistic skills. We perform ablation experiments on the features used by our model and show that fundamental frequency variation is the single most relevant feature class. Therefore, we conclude that future systems can detect whether they are addressed based only on speech prosody which does not (or only to a very limited extent) reveal the content of conversations not intended for the system. KW - addressee detection KW - complexity-identical human-computer interaction KW - computational paralinguistics KW - fundamental frequency variation KW - recurrent neural network Y1 - 2020 SN - 9781450375405 U6 - https://doi.org/10.1145/3404983.3410021 SP - 195 EP - 198 PB - Association for Computing Machinery CY - New York, NY, United States ER - TY - GEN A1 - Singh, Max Diamond T1 - Reclassification of Orthopedic Devices per the Medical Device Regulation T2 - OSMA Winter Educational Program, St. Petersburg/USA, 2019. - [Veranstalter: Orthopedic Surgical Manufacturers Association (OSMA)] Y1 - 2019 ER - TY - CHAP A1 - Bittner, Peter A1 - Hornecker, Eva A1 - Twisselmann, Ute A1 - Weber, Karsten ED - Dittrich, Klaus T1 - Die berufliche Situation informatisch Handelnder in der ethischen Reflexion T2 - Informatik 2003 - Innovative Informatikanwendungen, Band 2 der Beiträge der 33. Jahrestagung der Gesellschaft für Informatik e.V. (GI), 29. September - 2. Oktober 2003 in Frankfurt am Main N2 - Ausgehend von einer Betrachtung des Einflusses von InformatikerInnen und ihren Handlungsmustern auf Arbeitsprozesse und vor dem Hintergrund einer kritischen Auseinandersetzung mit bisherigen berufsethischen Leitlinien wollen wir einen neuen Ansatz wagen, über Informatik und Verantwortung nachzudenken. Eine Rekonstruktion des Begriffs Verantwortung bietet uns ein reichhaltiges begriffliches Instrumentarium zur Reflexion des Verhältnisses von Verantwortung und informatischer Praxis. Wir plädieren dafür, dass informatisch Handelnde lernen müssen, ethische Probleme zu erkennen, implizite Annahmen von Arbeitskulturen zu durchschauen und ein Bewusstsein für die Veränderbarkeit dieser Arbeitskulturen entwickeln sollten. Zusätzlich bedarf es kollektiver und rechtlicher Veränderungen der Rahmenbedingungen für verantwortliches Handeln. Y1 - 2003 UR - https://dl.gi.de/handle/20.500.12116/29680 SP - 176 EP - 181 ER - TY - CHAP A1 - Rudolph, Clarissa ED - Kurz-Scherf, Ingrid ED - Lepperhoff, Julia ED - Scheele, Alexandra T1 - Frauen- und Gleichstellungspolitik: Gesellschaftlicher Wandel durch Institutionen? T2 - Feminismus: Kritik und Intervention Y1 - 2009 UR - https://www.oth-regensburg.de/fileadmin/media/professoren/s/rudolph/Kurz-Scherf_ua_2009.pdf SN - 978-3-89691-777-5 SP - 115 EP - 132 PB - Westfälisches Dampfboot CY - Münster ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Querkrafttragfähigkeit von historisch mit Betonstabstahl bewehrten und mit geklebter Bewehrung biegeverstärkten Betonbauteilen Y1 - 2012 UR - https://www.irbnet.de/daten/rswb/12059022426.pdf SN - 978-3-8167-8707-5 PB - Fraunhofer IRB Verlag CY - Stuttgart ER -