TY - JOUR A1 - Horn, Lars-Christian A1 - Fischer, Uta A1 - Tannapfel, A. A1 - Kuhn, H. A1 - Hänel, C. A1 - Raptis, Georgios T1 - The role of p53 tumorsuppressorgene in tumor progression in cervical cancer JF - Pathology - Research and Practice KW - Tumorsuppressor-Gen KW - Tumorwachstum KW - Gebärmutterhalskrebs Y1 - 1999 VL - 195 SP - 328 ER - TY - RPRT A1 - Schenkel, Johannes A1 - Albert, Jürgen A1 - Raptis, Georgios T1 - Arbeitskonzept Notfalldatenmanagement KW - Elektronische Gesundheitskarte KW - Notfallmedizin Y1 - 2011 UR - www.bundesaerztekammer.de/downloads/Arbeitskonzept_NFDM_1.051.pdf ER - TY - THES A1 - Raptis, Georgios T1 - Vertraulichkeit von medizinischen Daten in der Telematik-Infrastruktur - Sicherheitsanalyse unter Berücksichtigung von Aspekten der langfristigen Sicherheit KW - Medizinische Dokumentation KW - Telekommunikation KW - Datensicherheit Y1 - 2008 CY - Heidelberg ER - TY - GEN A1 - Raptis, Georgios T1 - Mechanismen und Einsatzkonzepte von Heilberufsausweis und elektronischer Gesundheitskarte BT - Vortrag T2 - Oberseminar im Fachbereich Informatik, Kryptographie und Computeralgebra der TU-Darmstadt, 28.11.2006 KW - Elektronische Gesundheitskarte KW - Heilberuf KW - Ausweis Y1 - 2006 ER - TY - JOUR A1 - Höh, H. A1 - Gamael, A. A1 - Raptis, Georgios T1 - Energie und Phakozeit bei Ultraschall und Laserphakoemulsifikation JF - Klinische Monatsblätter für Augenheilkunde KW - Phakoemulsifikation KW - Ultraschall Y1 - 2000 VL - 217 IS - Suppl. 8 SP - 5 ER - TY - GEN A1 - Raptis, Georgios T1 - Einsatzmöglichkeiten des elektronischen Heilberufsausweises BT - Vortrag im Rahmen des CAST-Forums, Fraunhofer IGD, 14.09.2006 T2 - CAST-Forums, Fraunhofer IGD, 14.09.2006 KW - Heilberuf KW - Ausweis Y1 - 2006 ER - TY - JOUR A1 - Hornberger, Helga A1 - Marquis, Peter M. A1 - Christiansen, Silke H. A1 - Strunk, Horst P. T1 - Microstructure of a high strength alumina glass composite JF - Journal of Materials Research N2 - The morphology and microstructure of an Al2O3 glass composite (trade name In-Ceram, Vita Zahnfabrik) were studied using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The composite was produced by infiltration of a lanthanum-based glass throughout a porous Al2O3 body. This alumina body was formed by three classes of particles differing in size and shape: faceted particles typically ≤4 μm in diameter, platelets of average diameter 8 μm, 1.5 μm thickness, and small spheres 0.4 μm in diameter. The outstanding strength properties of the composite (600 MPa, ball-on-ring test) are a result of the high wetting capability of the glass phase on the Al2O3 surface. In addition, plastic strain relaxation in the faceted particles by dislocation formation compensates partially for residual stresses and impedes crack formation at the glass/Al2O3 interface. Y1 - 1996 U6 - https://doi.org/10.1557/JMR.1996.0104 VL - 11 IS - 4 SP - 855 EP - 858 ER - TY - PAT A1 - Hornberger, Helga A1 - Thiel, Norbert A1 - Vollmann, Markus T1 - Fully ceramic tooth replacement with a frame made of cer-stabilised zircon-oxide N2 - Vollkeramischer Zahnersatz mit einem Gerüst, das aus einem Gerüstmaterial aus einem Cer-stabilisierten Zirkonoxid (Ce-ZrO2) mit einem Anteil von bis zu 25 Gew% Aluminiumoxid (Al2O3) bezogen auf den Anteil an ZrO2 aufgebaut ist und einem Infiltrationsglasanteil im Gerüst von 0-40 Vol% bezogen auf das Volumen des Gerüsts sowie einer auf das Gerüstmaterial abgestimmten Verblendkeramik.Die Erfindung betrifft die Verwendung von cer-stabilisiertem ZrO2 zur Herstellung von Gerüstmaterialien, die als Restauration im Dentalbereich einsetzbar sind. T2 - Vollkeramischer Zahnersatz mit einem Gerüst aus einem cer-stabilisierten Zirkonoxid Y1 - 2002 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=bibdat&docid=WO002002047616A3 ER - TY - JOUR A1 - Gebhardt, F. A1 - Seuss, Sigrid A1 - Turhan, Metehan C. A1 - Hornberger, Helga A1 - Virtanen, Sannakaisa A1 - Boccaccini, Aldo R. T1 - Characterization of electrophoretic chitosan coatings on stainless steel JF - Materials Letters N2 - Electrophoretic chitosan deposits on stainless steel AISI 316 L were produced and characterized. The coating quality (thickness, defectiveness, corrosion protection ability) was seen to depend on the electric field used for EPD. Corrosion studies in concentrated simulated body fluid (SBF5) demonstrated that the surface characteristics of AISI 316 L can be positively influenced by the chitosan coating. KW - Chitosan KW - Electrophoretic deposition KW - Biomaterials KW - Electrochemistry Y1 - 2012 U6 - https://doi.org/10.1016/j.matlet.2011.08.088 VL - 66 IS - 1 SP - 302 EP - 304 ER - TY - PAT A1 - Aechtner, Stefan A1 - Hornberger, Helga A1 - Nagel, Emil A1 - Thiel, Norbert T1 - Composite material and method for the preparation thereof N2 - A composite material with a porous inorganic-nonmetallic matrix and a second material, characterized in that said porous inorganic-nonmetallic matrix has a bending strength of >=40 MPa as measured according to ISO 6 872; said second material is an organic material which at least partly fills the pores of said porous matrix; and said composite material has a modulus of elasticity, E, of >=25 GPa as measured according to ISO 10 477. Y1 - 2001 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=bibdat&docid=US020090001623A1 ER - TY - PAT A1 - Muerrle, Ulrich A1 - Hornberger, Helga T1 - Method of making a ceramic restoration N2 - Production of a dental reconstruction comprises: (a) forming a mold (12) from a model (10); (b) using (12) to make an isotropically heat-expandable replica from a ceramic precursor (14); (c) oxidizing (14) to produce an enlarged ceramic replica; (d) forming a silicone mold from this replica; (e) using (d) to make a second ceramic replica; and (f) sintering the second replica with volume reduction to form a replica identical to (10). T2 - Verfahren zur Herstellung einer Zahnrestauration aus Keramik Y1 - 2003 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=bibdat&docid=EP000001346702A1 ER - TY - JOUR A1 - Hornberger, Helga A1 - Marquis, Peter M. A1 - Franks, J. T1 - The impact of diamond-like coatings on the strength of dental ceramics JF - Journal of Dental Research Y1 - 1995 VL - 74 SP - 522 ER - TY - JOUR A1 - Hornberger, Helga A1 - Marquis, Peter M. T1 - Mechanical properties and microstructure of In-Ceram BT - a ceramic-glass composite for dental crowns JF - Glastechnische Berichte - Glass Science and Technology Y1 - 1995 VL - 68 IS - 6 SP - 188 EP - 194 ER - TY - JOUR A1 - Manaranche, Claire A1 - Hornberger, Helga T1 - A proposal for the classification of precious dental alloys according to their resistance to corrosion based on the iso 10271 standard JF - European Cells and Materials N2 - A lot of dental alloys are available on the market. Among these alloys, there are the conventional alloys, the so called casting alloys used without ceramics, the bonding alloys used with high fusing ceramics and the universal alloys used without or with low fusing ceramics. It is im portant to know the physical and mechanical properties of these materials but also their biocompatibility and their resistance to corrosion. Dental alloys are generally placed in the mouth for many years, they must not induce adverse biological reactions such as gingival swelling and erythema, mucosal pain and lichenoid reactions. Although these troubles are often caused not by the materials itself (1, 2), they can be induced by the metallic ions released during their corrosion. In order to decrease the risks to the health, it is necessary to study the corrosion of the dental alloys. Currently, the ISO 10271 Standard (3), describes 3 different corrosion tests: a static immersion test (chemical corrosion), an electrochemic al test and a tarnish test. However, there are no indications yet about the possible interpretation of test results. In this paper, we propose a method to compare and classify the dental alloys in relation to their chemical and electrochemical corrosion results. METHODS: The material tested are pure metals such as gold, palladium, silver, copper and zinc as well as dental alloys which are commercially sold (see Table 1). 54 different materials have been tested. A minimum of four samples of each material were tested by electrochemic al corrosio n and a minimum of three in chemical test. The samples were cast and prepared as indicated by the manufacturer and by the ISO 10271. For the electrochemical test, the samples are in the form of disks 11 mm in diameter. They are tested with a potentiostat/galvanostat Voltalab Model 21. For the chemical test, the samples are rectangular with the dimensions 35X10X1.7 mm. The solution used and the operating conditions are described in the ISO 10271. The concentration of metallic ions released is measured by Induced Coupled Plasma Y1 - 2003 UR - https://www.researchgate.net/publication/242728857_A_proposal_for_the_classification_of_precious_dental_alloys_according_to_their_resistance_to_corrosion_based_on_the_ISO_10271_standard VL - 5 IS - SUPPL. 1 SP - 34 EP - 36 PB - Univ. of Wales CY - Aberystwyth, Wales ER - TY - JOUR A1 - Hornberger, Helga A1 - Weissmann, R. A1 - Lutz, N. T1 - Machining of silica glasses using excimer laser radiation JF - Glastechnische Berichte - Glass Science and Technology Y1 - 1996 VL - 69 IS - 2 SP - 44 EP - 49 ER - TY - JOUR A1 - Wessely, Rainer A1 - Hausleiter, Jörg A1 - Michaelis, Cornelia A1 - Jaschke, Birgit A1 - Vogeser, Michael A1 - Milz, Stefan A1 - Behnisch, Boris A1 - Schratzenstaller, Thomas A1 - Renke-Gluszko, Magdalena A1 - Stöver, Michael A1 - Wintermantel, Erich A1 - Kastrati, Adnan A1 - Schömig, Albert T1 - Inhibition of neointima formation by a novel drug-eluting stent system that allows for dose-adjustable, multiple, and on-site stent coating JF - Arteriosclerosis, Thrombosis, and Vascular Biology N2 - Objective The risk of in-stent restenosis can be considerably reduced by stents eluting cytostatic compounds. We created a novel drug-eluting stent system that includes several new features in the rapidly evolving field of stent-based drug delivery. Methods and Results The aim of the present study was the preclinical evaluation of a stent-coating system permitting individual, on-site coating of stents with a unique microporous surface allowing for individualizable, dose-adjustable, and multiple coatings with identical or various compounds, designated ISAR (individualizable drug-eluting stent system to abrogate restenosis). Stents were coated with 0.75% rapamycin solution, and high-performance liquid chromatography (HPLC)-based determination of drug release profile indicated drug release for >21 days. Rapamycin-eluting microporous (REMP) stents implanted in porcine coronary arteries were safe. To determine the efficacy of REMP stents, this novel drug-eluting stent platform was compared with the standard sirolimus-eluting stent. At 30 days, in-stent neointima formation in porcine coronary arteries was similar in both groups, yielding a significant decrease of neointimal area and injury-dependent neointimal thickness compared with bare-metal stents. Conclusion The ISAR drug-eluting stent platform as a novel concept for stent coating allows for a safe, effective, on-site stent coating process, thus justifying further clinical evaluation to decrease in-stent restenosis in humans. In-stent neointima formation can be successfully attenuated by drug-eluting stents. We introduce a novel conceptual approach for stent-coating that allows for dose-adjustable, on-site stent coating process if desired with multiple compounds. Microporous stents coated with rapamycin proved safe and effective for the limitation of neointima formation in a porcine coronary stent model. KW - drug-eluting stent KW - stent platform KW - sirolimus KW - rapamycin Y1 - 2005 U6 - https://doi.org/10.1161/01.ATV.0000157579.52566.ee SN - 1524-4636 VL - 25 IS - 4 SP - 748 EP - 753 ER - TY - JOUR A1 - Hausleiter, Jörg A1 - Kastrati, Adnan A1 - Wessely, Rainer A1 - Dibra, Alban A1 - Mehilli, Julinda A1 - Schratzenstaller, Thomas A1 - Graf, Isolde A1 - Renke-Gluszko, Magdalena A1 - Behnisch, Boris A1 - Dirschinger, Josef A1 - Wintermantel, Erich A1 - Schömig, Albert T1 - Prevention of restenosis by a novel drug-eluting stent system with a dose-adjustable, polymer-free, on-site stent coating JF - European Heart Journal - Clinical research N2 - Aims Drug-eluting stents (DES) represent a major advance in interventional cardiology. Along with the success shown, current DES also present limitations related to the presence of polymer-coating, fixed drug, and dose used. With the ISAR (Individualized Drug-Eluting Stent System to Abrogate Restenosis) project, a DES system has been developed that permits individualized choice of the drug and dose to use for the given patient. The objective of this prospective dose finding study was to assess the feasibility, safety, and efficacy of a polymer-free on-site stent coating with increasing rapamycin doses. Methods and results In this dose finding study, 602 patients were sequentially enrolled in four groups: microporous bare metal stent (BMS), DES stents coated with a 0.5, 1.0, and 2.0% rapamycin solution. The angiographic in-segment restenosis rate at follow-up angiography was the primary study endpoint. In-segment restenosis was significantly reduced from 25.9% with BMS to 18.9, 17.2, and 14.7% with 0.5, 1.0, and 2.0% rapamycin-eluting stents, respectively (P=0.024). Similarly, the need for target lesion revascularization at 1 year follow-up was reduced from 21.5% with BMS to 16.4, 12.6, and 8.8% with 0.5, 1.0, and 2.0% rapamycin-eluting stents, respectively (P=0.006). Conclusion The placement of polymer-free stents coated on-site with rapamycin is feasible and safe. Furthermore, a dose-dependent efficacy in restenosis prevention is achievable with this new DES concept. KW - Restenosis KW - Stents KW - Randomized KW - Rapamycin KW - Polymer Y1 - 2005 U6 - https://doi.org/10.1093/eurheartj/ehi405 VL - 26 IS - 15 SP - 1475 EP - 1481 ER - TY - CHAP A1 - Weber, Karsten T1 - Der Preis der Informationsfreiheit T2 - Wissen und Bildung in der modernen Gesellschaft Y1 - 2005 UR - https://www.hg-graebe.de/Texte/RLKonf-2005/weber-05-1.pdf PB - Rosa-Luxemburg-Stiftung e.V. CY - Leipzig ER - TY - CHAP A1 - Meyer-Sickendiek, Burkhard A1 - Hussein, Hussein A1 - Baumann, Timo ED - Berton, André ED - Haiber, Udo ED - Minker, Wolfgang T1 - Recognizing Modern Sound Poetry with LSTM Networks T2 - Proceedings of Elektronische Sprachsignalverarbeitung (ESSV) N2 - Our paper focuses on the computational analysis of “readout poetry” (german: Hördichtung) – recordings of poets reading their own work – with regards to the most important type of this genre, the modern “sound poetry” (german: Lautdichtung). Whereas “readout poetry” often uses normal words and sentences, the “sound poetry”, developed by dadaistic poets like Hugo Ball and Kurt Schwitters or concrete poets like Ernst Jandl, Oskar Pastior, or Bob Cobbing, combines the “microparticles of the human voice” like the segments in Ernst Jandls sound poem “schtzngrmm” (“schtzngrmm / schtzngrmm / tttt / tttt / grrrmmmmm / tttt / sch / tzngrmm”). Within the genre of sound poetry, there are two main forms: The lettristic and the syllabic decomposition. A short anecdote will explain this difference: The dadaist Raoul Hausmann developed the lettristic sound poetry in his early dadaistic poem “fmsbw” from 1918. This is said to have inspired his successor Schwitters, whose famous “Ursonate” [The Sonata in Primal Speech] begins with the words “Fümms bö wö tää zää Uu”. With the “Ursonate”, Schwitters developed a syllabic variation of the lettristic poems of Hausmann. The paper shows how to train a bidirectional LSTM network in order to differ between these “dadaistic” sound poems and the “normal” read out poems. In a further step, we will also show how to distinguish between the lettristic and the syllabic decomposition. Based on a bidirectional LSTM network that reads encodings of the character sequence in the poem and uses the output of each directional layer, we identify poems of the sound poetry genre and differentiate between its two types of compositions. The classification results of sound poetry vs. other poetry as well as lettristic vs. syllabic decomposition are with a high performance, yielding a f-scores of 0.86 and 0.84, respectively. KW - Sprachverarbeitung Y1 - 2018 UR - http://www.essv.de/paper.php?id=407 SN - 978-3-959081-28-3 SP - 192 EP - 199 PB - TUDpress CY - Ulm, Germany ER - TY - CHAP A1 - Laumer, Tobias A1 - Schmidt, Michael A1 - Stichel, Thomas T1 - Correlation Analysis of Different Building Parameters on the Part Properties of Parts Built by Simultaneous Laser Beam Melting of Polymers T2 - Fraunhofer Direct Digital Manufacturing Conference DDMC 2016 : Conference Proceedings, March 2016, Berlin N2 - Simultaneous Laser Beam Melting of polymers (SLBM) allows the generation of multi-material components,consisting of different thermoplastic polymers, within one additive building process. Besides the common advantagesof conventional Laser Beam Melting (LBM), multi-material components built by SLBM can fulfill different productrequirements like different chemical resistances or haptic material properties within a single part. To achieve suchparts, different powder materials are deposited next to each other and preheated a few degrees below their meltingtemperatures by infrared emitters and laser radiation (λ = 10.60 μm), before in the last step the preheated powdersare molten simultaneously by an additional laser source (λ = 1.94 μm). In this paper, different polymer powders likepolypropylene (PP) and polyamide 12 (PA12) are used for the generation of multi-material specimens. By varyingdifferent building parameters according to a specified design of experiments, their influence on the part properties isanalyzed. Important building parameters are the intensity and the irradiation time of the laser beam used for meltingthe preheated powders. Besides using tensile tests to determine the tensile strength and the elongation at break, theaverage part height in dependence of the energy input is analyzed. The overall aim is to specify the correlationbetween different building parameters regarding the energy deposition on the resulting part properties. Y1 - 2016 UR - https://www.researchgate.net/publication/298791419_Correlation_Analysis_of_Different_Building_Parameters_on_the_Part_Properties_of_Parts_Built_by_Simultaneous_Laser_Beam_Melting_of_Polymers PB - Fraunhofer Verlag ER - TY - CHAP A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Bock, Thomas A1 - Amend, Philipp A1 - Schmidt, Michael T1 - Characterization of temperature-dependent optical material properties of polymer powders T2 - AIP Conference Proceedings N2 - In former works, the optical material properties of different polymer powders used for Laser Beam Melting (LBM) at room temperature have been analyzed. With a measurement setup using two integration spheres, it was shown that the optical material properties of polymer powders differ significantly due to multiple reflections within the powder compared to solid bodies of the same material. Additionally, the absorption behavior of the single particles shows an important influence on the overall optical material properties, especially the reflectance of the powder bed. Now the setup is modified to allow measurements at higher temperatures. Because crystalline areas of semi-crystalline thermoplastics are mainly responsible for the absorption of the laser radiation, the influence of the temperature increase on the overall optical material properties is analyzed. As material, conventional polyamide 12 and polypropylene as new polymer powder material, is used. By comparing results at room temperature and at higher temperatures towards the melting point, the temperature-dependent optical material properties and their influence on the beam-matter interaction during the process are discussed. It is shown that the phase transition during melting leads to significant changes of the optical material properties of the analyzed powders. KW - laser beam melting KW - material qualification KW - Optical Material Properties KW - Polymers Y1 - 2014 U6 - https://doi.org/10.1063/1.4918508 IS - 1 PB - AIP Publishing ER - TY - JOUR A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Raths, Max A1 - Schmidt, Michael T1 - Analysis of the Influence of Different Flowability on Part Characteristics Regarding the Simultaneous Laser Beam Melting of Polymers JF - Physics Procedia N2 - Powder based Additive Manufacturing technologies offer huge potential for building parts with almost no geometrical restrictions, but both the process controlling as well as the part properties are strongly dependent on different material characteristics of the material, like the flowability. In this work, different weight percentages of nano-scaled silica dioxide particles (Aerosil®) are admixed to pure polyethylene and polypropylene powder and the resulting flowability is determined. Besides using the Hausner ratio as standardized value, the degree of coverage is introduced as a new characteristic to quantify the powder flowability. The degrees of coverage are compared to the Hausner ratios to allow a discussion and evaluation about the different characteristic values. Additionally, tensile bars consisting of polypropylene are generated to determine the porosity by cross sections and the mechanical part properties by tensile testing. As mechanical part properties, the tensile strength and elongation at break are determined and the effects of different powder flowability on these properties are analyzed. KW - additive manufacturing KW - laser beam melting of polymers KW - material qualification Y1 - 2016 U6 - https://doi.org/10.1016/j.phpro.2016.08.098 SN - 1875-3892 SN - 1875-3884 VL - 83 SP - 937 EP - 946 PB - Elsevier ER - TY - JOUR A1 - Stichel, Thomas A1 - Frick, Thomas A1 - Laumer, Tobias A1 - Tenner, Felix A1 - Hausotte, Tino A1 - Merklein, Marion A1 - Schmidt, Michael T1 - A Round Robin study for selective laser sintering of polymers: Back tracing of the pore morphology to the process parameters JF - Journal of Materials Processing Technology N2 - The mechanical properties of polymer parts built by Selective Laser Sintering are strongly related to the internal microstructure which differs with the applied production parameters. The paper focuses on the back tracing of the pore morphology of laser sintered polyamide-12 samples to the process parameters. Therefore, a data base is used which is supplied by a Round Robin initiative and includes mechanical tensile tests and the microstructural analysis of the pore morphology of several different sample charges built with different machines. The pore morphologies (porosity, pore density, pore shape and pore arrangement) measured by X-ray computed tomography are compared and discussed regarding the employed parameters and the resulting mechanical properties. The investigations point out that pore density is a superior indicator than porosity for mechanical issues. This is especially valid along the build direction since pore morphology has shown to be strongly anisotropic. Moreover, the analysis revealed that pore density is strongly affected by the process temperature, which is proved to be essential for the fabrication of mechanical robust parts using Selective Laser Sintering. Y1 - 2018 U6 - https://doi.org/10.1016/j.jmatprotec.2017.10.013 VL - 252 IS - February SP - 537 EP - 545 PB - Elsevier ER - TY - JOUR A1 - Pfingsten, Andrea T1 - Genauigkeit des Lachman Tests zur Feststellung einer Ruptur des vorderen Kreuzbandes BT - Ein systematischer Review über Metaanalysen der letzten fünf Jahre JF - pt - Zeitschrift für Physiotherapeuten N2 - Die Ruptur des vorderen Kreuzbandes (ACL, anterior cruciate ligament) ist die häufigste Bandverletzung des Kniegelenks und kann zu schwerwiegenden Folgen führen. Um diese im Rahmen einer Behandlung oder eines Forschungsprojektes manuell zu diagnostizieren, werden geeignete Assessments benötigt. Der vorliegende systematische Review stellt die vorhandene Evidenz des Lachman-Tests als diagnostisches Verfahren zur Feststellung einer ACL-Ruptur dar. Y1 - 2009 SN - 1614-0397 VL - 61 IS - 2 SP - 108 EP - 123 PB - Pflaum CY - München ER - TY - JOUR A1 - Pfingsten, Andrea A1 - Trickes, Claudia A1 - Max, Susanne A1 - Borgetto, Bernhard T1 - Die Forschungspyramide. Ein Modell zur Bewertung der Evidenz durch Zusammenführung verschiedener Forschungsansätze in einem systematischen Review JF - pt - Zeitschrift für Physiotherapeuten Y1 - 2011 SN - 1614-0397 VL - 63 IS - 10 SP - 16 EP - 18 PB - Pflaum CY - München ER - TY - JOUR A1 - Pfingsten, Andrea T1 - Untersuchung des vorderen Kreuzbandes. Indikation, Ausführung und Interpretation des Lachman-Tests im Rahmen der Befunderhebung des Kniegelenks JF - pt - Zeitschrift für Physiotherapeuten Y1 - 2009 SN - 1614-0397 VL - 61 IS - 2 SP - 38 EP - 40 PB - Pflaum CY - München ER - TY - JOUR A1 - Pfingsten, Andrea T1 - Bewertung der Gesamtevidenz in Reviews. Kombination beobachtender und experimenteller Studien JF - pt - Zeitschrift für Physiotherapeuten Y1 - 2011 SN - 1614-0397 VL - 63 IS - 12 SP - 18 EP - 20 PB - Pflaum CY - München ER - TY - CHAP A1 - Grunow, Dieter A1 - Pfingsten, Andrea A1 - Borgetto, Bernhard ED - Hurrelmann, Klaus ED - Laaser, Ulrich ED - Razum, Oliver T1 - Selbsthilfe T2 - Handbuch Gesundheitswissenschaften Y1 - 2012 SN - 978-3-7799-3857-6 PB - Juventa Verlag CY - Weinheim, München ET - 5. Auflage ER - TY - CHAP A1 - Steffens, Oliver A1 - Suhrke, Michael A1 - Rössler, Ulrich ED - Kramer, Bernhard T1 - Ground state and collective excitations of quantum dots: Correlation effects and Hund’s rule in magnetic field T2 - Advances in Solid State Physics N2 - We review ground-state properties and collective excitations of semiconductor quantum dots in a magnetic field obtained from current-spin density-functional theory. Due to exchange-correlation, a generalized Hund’s rule in magnetic field can be established which leads to spin alignment in partially occupied energy shells at the Fermi energy. This results, in distinct spin structures in single-electron addition spectra. Current-dependent exchange-correlation modifies the magnetic-field dependence of the ground state configuration and leads to deviations from plain spin-density calculations. Moreover it gives rise to spontaneous current textures at zero magnetic field. Collective excitation spectra, explicitly calculated for inelastic light scattering, exhibit novel features in their magnetic field dependence due to a finite ground-state spin density. KW - Spin Density KW - Fermi Energy KW - Collective Excitation KW - Addition Spectrum KW - Inelastic Light Scattering Y1 - 1999 SN - 978-3-540-44553-1 U6 - https://doi.org/10.1007/BFb0107469 VL - 39 SP - 111 EP - 120 PB - Friedr. Vieweg & Sohn CY - Braunschweig ER - TY - CHAP A1 - Görtler, Michael ED - Görtler, Michael ED - Lotz, Mathias ED - Partetzke, Marc ED - Poma, Sara Poma ED - Winckler, Marie T1 - Herausforderungen einer kritischen politischen Bildung T2 - Kritische politische Bildung: Standpunkte und Perspektiven N2 - In der politischen Bildung wird die Debatte um eine kritische politische Bildung erneut geführt. Im Fokus der Debattenbeiträge stehen unterschiedliche Vorstellungen hinsichtlich Notwendigkeit, Begründung, Ziele, Inhalte und Methoden einer kritischen politischen Bildung im schulischen wie außerschulischen Bereich. Dieser Band zeigt unterschiedliche Standpunkte und Forschungsperspektiven auf, wie sie diesbezüglich auf der GPJE-Nachwuchstagung im Frühjahr 2016 an der Universität Bremen diskutiert worden sind. Der Band gliedert sich in drei Teile. Der erste umfasst theoretische wie konzeptionelle Beiträge. Im zweiten Teil steht die empirische Forschung im Mittelpunkt. Im dritten Teil werden schließlich die politisch-bildnerische Praxis und deren Reflexion thematisiert. Insgesamt werfen die Beiträge einen differenzierten Blick auf die Debatte um den Gehalt einer kritischen politischen Bildung. Dabei setzen sich die Autorinnen und Autoren mit Argumenten aus der aktuellen Diskussion auseinander und beleuchten blinde Flecken. KW - Diskurs KW - Perspektive KW - Politische Bildung KW - Standort Y1 - 2017 SN - 978-3-7344-0420-7 SP - 123 EP - 135 PB - Wochenschau Verl. CY - Schwalbach/Ts. ER - TY - JOUR A1 - Borrmann, André A1 - Schorr, Markus A1 - Obergrießer, Mathias A1 - Ji, Yang A1 - Wu, I-Chen A1 - Günthner, Willibald A. A1 - Euringer, Thomas A1 - Rank, Ernst ED - Caldas, Carlos H. ED - O'Brien, William J. T1 - Using product data management systems for civil engineering projects - Potentials and obstacles JF - Computing in civil engineering : proceedings of the 2009 ASCE International Workshop on Computing in Civil Engineering ; June 24 - 27, 2009, Austin, Texas Y1 - 2009 VL - 346 SP - 359 EP - 369 PB - ASCE ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Erwachsenenbildung und Zeit JF - Zeitschrift für Weiterbildungsforschung (ZfW) N2 - Der Beitrag fokussiert die Bedeutung von Zeit für die politische Erwachsenenbildung. Angesichts aktueller soziokultureller und sozioökonomischer Herausforderungen - besonders: der Ökonomisierung und Beschleunigung im Kontext von Bildung und Lernen - ergeben sich eine ganze Reihe von drängenden Zeitfragen. Der Bedeutung von Zeit wird in der Erwachsenenbildung und der Politischen Bildung jedoch bisher wenig Aufmerksamkeit geschenkt. Aus diesem Grund wird diese Fragestellung im Beitrag vertieft. Erstens werden die Situation der politischen Erwachsenenbildung und zweitens der Forschungsstand untersucht. Ausgehend von den Befunden werden drittens drei Zugänge herausgearbeitet, welche die Bedeutung von Zeit für die politische Erwachsenenbildung sichtbar machen: Politische Bildung als Prozess und Verzögerung sowie Zeit als Gegenstand, um die Zeitlichkeit von Gesellschaft und Politik zu verstehen und zu beurteilen, um sich an der Gestaltung der Zeitstrukturen zu beteiligen. Der Beitrag endet mit einem Ausblick und offenen Fragen, die sich an die zeittheoretischen Überlegungen anschließen. The article focusses on the importance of time for the political adult education. Current socio-cultural and socio-economic challenges – in particular: the commodification and acceleration in the context of education and learning – results in a wide range of pressing time issues. However the adult education und the political education pay little attention to the importance of time. For this reason, this issue will be deepened in the article. First, the situation of the political adult education and secondly, the state of research are examined. On the base of the findings, three approaches are pointed out, which emphasize the importance of time for the political adult education: political education as a process and as a deceleration and also as a subject to understand and judge the temporality of politics and society as a necessary condition to participate in shaping the time structures. The paper ends with an outlook and open-ended questions, which adjoin the time theoretical considerations. KW - Acceleration KW - Adult education KW - Forschungsbericht KW - Lernen KW - Political education KW - Politische Erwachsenenbildung KW - Time Y1 - 2016 U6 - https://doi.org/10.1007/s40955-016-0052-2 IS - 1 SP - 9 EP - 25 PB - Springer ER - TY - JOUR A1 - Görtler, Michael T1 - Migration als Herausforderung der politischen Bildung. Bildungspraxis zwischen Vermittlungs- und Präventionsfunktion JF - Erwachsenenbildung: Vierteljahresschrift für Theorie und Praxis N2 - Dieser Beitrag ist als Theorie-Praxis-Reflexion ausgelegt, die auf einem Vortrag mit anschließender Gruppendiskussion mit Bildungspraktikern der katholischen Erwachsenenbildung basiert. Im Mittelpunkt steht die Frage, welche Aufgaben sich für die politische Bildungsarbeit mit Erwachsenen in der momentanen Situation ergeben. KW - Europa KW - Flüchtling KW - Katholische Erwachsenenbildung KW - Krise KW - Teilnehmer Y1 - 2016 U6 - https://doi.org/10.13109/erbi.2016.62.3.128 SN - 0341-7905 SN - 2365-4953 VL - 62 IS - 3 SP - 128 EP - 130 PB - Vandenhoeck & Ruprecht CY - Göttingen ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Bildung in unruhigen Zeiten? Ein Beispiel für eine Theorie-Praxis-Reflexion JF - forum erwachsenenbildung KW - Evangelische Erwachsenenbildung KW - Politische Bildung KW - Tagungsbericht KW - Theorie-Praxis-Beziehung Y1 - 2016 UR - https://www.waxmann.com/waxmann-zeitschriften/waxmann-zeitschriftendetails/?tx_p2waxmann_pi2[zeitschrift]=ZEI1028&tx_p2waxmann_pi2[ausgabe]=AUG100240&tx_p2waxmann_pi2[artikel]=ART101908&tx_p2waxmann_pi2[action]=artikel SN - 1433-769X VL - 49 IS - 2 SP - 48 EP - 49 PB - Waxmann CY - Münster ER - TY - JOUR A1 - Görtler, Michael T1 - Unzufriedene Demokraten und Radikalisierung als Herausforderung für die politische Bildung JF - Politische Bildung: Journal für politische Bildung KW - Demokratie KW - Fremdenfeindlichkeit KW - Politische Bildung KW - Radikalismus Y1 - 2015 SN - 2191-8244 SN - 2749-4888 IS - 4: Unzufriedene Demokraten - radikalisierte Überzeugungen SP - 34 EP - 42 PB - Wochenschau Verlag CY - Frankfurt am Main ER - TY - JOUR A1 - Görtler, Michael T1 - Dem Rechtspopulismus begegnen. Drei bildungspraktische Thesen JF - forum erwachsenenbildung KW - Erwachsenenbildung KW - Populismus Y1 - 2017 UR - https://www.waxmann.com/index.php?eID=download&id_artikel=ART102163&uid=frei SN - 1433-769X VL - 50 IS - 2 SP - 43 EP - 44 PB - Waxmann ER - TY - JOUR A1 - Görtler, Michael T1 - Was ist politische Bildung? JF - Praxis Gemeindepädagogik KW - Didaktik KW - Geschichte (Histor) KW - Konzept KW - Politische Bildung KW - Theorie Y1 - 2014 SN - 1860-6946 VL - 67 IS - 1 SP - 11 EP - 14 PB - Evangelische Verlagsanstalt CY - Leipzig ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Bildung in Zeiten des Rechtspopulismus. Pädagogische und fachdidaktische Ansätze zum Umgang mit einer gegenwärtigen Bedrohung für den Frieden JF - Vierteljahrsschrift für wissenschaftliche Pädagogik N2 - Right-wing populism challenges the societies in Europe. The rise of such movements and parties are a threat to peace and democracy in Germany. This article focuses the possibilities as well as the boundaries of political education under the current circumstances. To this end, it discusses theoretical explanations based on approaches in peace education, political didactics and social sciences to deal with right-wing populism in practice. (DIPF/Orig.). T2 - Political education in times of right-wing populism : Pedagogical and didactical approaches to deal with a current threat to peace KW - Begriff KW - Demokratie KW - Fachdidaktik KW - Frieden KW - Friedenspädagogik KW - Pädagogik KW - Politische Bildung KW - Populismus KW - Sozialwissenschaften Y1 - 2019 U6 - https://doi.org/10.30965/25890581-09501006 SN - 2589-0581 VL - 95 IS - 1 SP - 61 EP - 73 PB - Brill ER - TY - BOOK A1 - Görtler, Michael T1 - Politische Bildung und Zeit BT - Eine didaktische Untersuchung zur Bedeutung von Zeit für die politische Bildung N2 - Michael Görtler richtet in dieser Untersuchung den Fokus auf die Bedeutung von Zeit für die politische Bildung, da die Zeitlichkeit politischer Bildungsprozesse und demokratischer Politik in der Didaktik der politischen Bildung bisher kaum beachtet wurde. Der Autor verkleinert diese Lücke, erweitert den Fachdiskurs und gibt praktische Impulse für die politische Bildungsarbeit. Im Mittelpunkt steht die Frage nach dem expliziten wie impliziten Sichtbarwerden der Zeit in Ansätzen der Didaktik der politischen Bildung und der Bildungs- und Sozialwissenschaften. Dabei wird auch geprüft, welche didaktischen Herausforderungen in Bezug auf die Ziele, Inhalte und die Gestaltung von Lehr- und Lernprozessen auf der Subjekt- und Objektseite sowie in der Vermittlung zwischen beiden Seiten beachtet werden müssen. KW - Didaktik KW - Lehr-Lern-Prozess KW - Politische Bildung KW - Zeitbewusstsein KW - Zeit KW - Beschleunigung KW - Demokratie KW - Nachhaltige Entwicklung KW - Kritische politische Bildung Y1 - 2016 SN - 3-658-14194-8 U6 - https://doi.org/10.1007/978-3-658-14194-3 PB - Springer CY - Wiesbaden ER - TY - JOUR A1 - Görtler, Michael T1 - Die Beschleunigung von Lebenswelt und Politik - Gegenstand kritischer politischer Bildung und Thema des Politikunterrichts JF - Polis KW - Beschleunigung KW - Bildungspolitik KW - Bildungsziel KW - Demokratie KW - Deutschland KW - Lebenswelt KW - Politik KW - Politische Bildung KW - Politisches System KW - Sozialwissenschaftlicher Unterricht Y1 - 2013 SN - 1611-373X VL - 17 IS - 2 SP - 22 EP - 26 PB - Wochenschau Verlag ER - TY - JOUR A1 - Schöberl, Cora A1 - Görtler, Michael T1 - Politische Bildungsarbeit unter widrigen Bedingungen? Empirische Perspektiven auf die Praxis JF - Erwachsenenbildung - EB : Vierteljahresschrift für Theorie und Praxis N2 - In diesem Beitrag werden empirische Perspektiven auf die politische Bildungspraxis mit Erwachsenen in Zeiten von Angst und Unsicherheit diskutiert. Dabei liegt die Annahme zugrunde, dass politische Bildungsarbeit mit Erwachsenen unter widrigen Bedingungen geleistet werden muss. Dieser Standpunkt stützt sich einerseits auf den Fachdiskurs, Positionspapiere von Fachverbänden und Erfahrungsberichte, andererseits auf die Ergebnisse aus qualitativen Untersuchungen der Verfasserin und des Verfassers dieses Beitrags. KW - Angst KW - Bildungsangebot KW - Bildungsarbeit KW - Erwachsenenbildung KW - Gesellschaft KW - Politische Bildung KW - Populismus Y1 - 2019 U6 - https://doi.org/10.13109/erbi.2019.65.3.124 SN - 2365-4953 VL - 65 IS - 3 SP - 124 EP - 127 PB - Vandenhoeck & Ruprecht ER - TY - CHAP A1 - Görtler, Michael ED - Moegling, Klaus ED - Hadeler, Swantje ED - Hund-Göschel, Gabriel T1 - Zur Bedeutung von Zeit für gute Schulen T2 - Was sind gute Schulen? Teil 1. Konzeptionelle Überlegungen und Diskussion N2 - Der vorliegende Beitrag stellt schulpädagogische Überlegungen zur Bedeutung von Zeit für gute Schulen an. Anhand von theoretischen und praktischen Ansätzen wird der Frage nachgegangen, welche Rolle Zeit beim Lehren und Lernen spielt und welche Konsequenzen sich daraus aus der Perspektive der Schulpädagogik ziehen lassen. N2 - This paper presents considerations on the importance of time for good schools from the perspective of school pedagogics. The role of time for teaching and learning as well as the consequences to be drawn will be discussed from the perspective of school pedagogics on the basis of theoretical and practical approaches. T2 - The meaning of time for good schools KW - Freizeit KW - Ganztagsunterricht KW - Schulalltag KW - Schule KW - Schulpädagogik KW - Tagesablauf KW - Unterrichtszeit KW - Zeit KW - Zeitbudget Y1 - 2016 SN - 3-934575-88-9 SP - 280 EP - 290 PB - Prolog-Verlag CY - Immenhausen bei Kassel ER - TY - CHAP A1 - Görtler, Michael ED - Lotz, Mathias ED - Pohl, Kerstin T1 - Politik, Bildung, Beschleunigung: Überlegungen zur Bedeutung einer Zeit-Diagnose für die politische Bildung T2 - Gesellschaft im Wandel!? Neue Herausforderungen für die politische Bildung und ihre Didaktik Y1 - 2019 SN - 978-3-7344-0827-4 SP - 61 EP - 68 PB - Wochenschau Verlag CY - Frankfurt/M. ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Sozialisation und politische Bildung JF - Politische Bildung KW - Außerschulische Jugendbildung KW - Jugend KW - Politische Bildung KW - Politische Sozialisation Y1 - 2013 IS - 3 SP - 8 EP - 13 PB - Wochenschau Verlag ER - TY - JOUR A1 - Schöberl, Cora A1 - Görtler, Michael T1 - »Wir müssen auch über uns reden! Migration, Rechtspopulismus und Erwachsenenbildung.« JF - DIE – Zeitschrift für Erwachsenenbildung N2 - In diesem Beitrag werden empirische Perspektiven auf die politische Bildungspraxis mit Erwachsenen in Zeiten von Angst und Unsicherheit diskutiert. Dabei liegt die Annahme zugrunde, dass politische Bildungsarbeit mit Erwachsenen unter widrigen Bedingungen geleistet werden muss. Dieser Standpunkt stützt sich einerseits auf den Fachdiskurs, Positionspapiere von Fachverbänden und Erfahrungsberichte, andererseits auf die Ergebnisse aus qualitativen Untersuchungen der Verfasserin und des Verfassers dieses Beitrags. Y1 - 2019 VL - 65 IS - 3 PB - Vandenhoeck & Ruprecht CY - Böhlau ER - TY - CHAP A1 - Görtler, Michael ED - Bobrowska, Ewa ED - Gierszewski, Dorota ED - Kluzowicz, Julia T1 - Politische Bildung und Rechtspopulismus in der Migrationsgesellschaft T2 - Civic education in the context of migration / Politische Bildung im Kontext der Migration Y1 - 2018 SN - 978-83-233-4506-0 PB - Jagiellonian University Press CY - Krakau ER - TY - JOUR A1 - Görtler, Michael T1 - Widersprüche professionellen Handelns: Situative Anforderungen zwischen Fach- und Sozialbezug in der Weiterbildungsberatung JF - Weiterbildung - Zeitschrift für Grundlagen, Praxis und Trends Y1 - 2019 SN - 1861-0501 IS - 1 PB - Luchterhand CY - München ER - TY - JOUR A1 - Görtler, Michael T1 - Zur Diskussion: Kinder- und Jugendhilfe mit Geflüchteten. Professionelles Handeln unter schwierigen Bedingungen JF - Unsere Jugend N2 - Im Fach- und Praxisdiskurs der Kinder- und Jugendhilfe findet sowohl die Situation Geflüchteter als auch die der darin tätigen Sozialarbeiterinnen und Sozialarbeiter vergleichsweise wenig Beachtung. Insbesondere die Widersprüche, die beim professionellen Handeln auftreten, werden kaum thematisiert. KW - Flüchtling KW - Jugendhilfe KW - Sozialarbeiter Y1 - 2019 U6 - https://doi.org/10.2378/uj2019.art14d SN - 0342-5258 VL - 71 IS - 2 SP - 89 EP - 93 PB - Reinhardt CY - München ER - TY - JOUR A1 - Görtler, Michael T1 - Beratung und Bildung in der Migrationsgesellschaft. Eine gemeinsame Aufgabe von Erwachsenenpädagogik und Sozialpädagogik? JF - Erwachsenenbildung KW - Bildungsberatung KW - Einwanderer KW - Erwachsenenbildung KW - Multikulturelle Gesellschaft KW - Sozialpädagogik Y1 - 2018 U6 - https://doi.org/10.13109/erbi.2018.64.1.27 SN - 0341-7905 IS - 1 SP - 31 EP - 33 PB - Vandenhoeck & Ruprecht CY - Göttingen ER - TY - CHAP A1 - Görtler, Michael ED - Görtler, Michael ED - Reheis, Fritz T1 - Politikdidaktik und Zeit T2 - Reifezeiten: Zur Bedeutung der Zeit in Bildung, Politik und politischer Bildung KW - Zeitdruck KW - Zeitwahrnehmung KW - Schule KW - Hochschule KW - Politik Y1 - 2012 SN - 3-89974-781-X SN - 978-3-89974-781-2 SP - 193 EP - 208 PB - Wochenschau Verl. CY - Schwalbach, Taunus ER - TY - JOUR A1 - Görtler, Michael T1 - Sozialraumorientierte politische Bildung – Didaktische Überlegungen zu einem politisch-bildenden Handlungskonzept der Sozialen Arbeit JF - sozialraum.de Y1 - 2018 UR - https://www.sozialraum.de/sozialraumorientierte-politische-bildung.php SN - 1868-2596 VL - 10 IS - 1 PB - socialnet CY - Bonn ER - TY - JOUR A1 - Görtler, Michael T1 - Schwierige Übergänge: Überlegungen zum Studium der Sozialen Arbeit und zum Berufseinstieg als Sozialarbeiter JF - Forum für Kinder- und Jugendarbeit Y1 - 2017 UR - https://www.kinder-undjugendarbeit.de/fileadmin/user_upload/FORUM_2017/Teil_1_Forum_4_2017.pdf SN - 1434-4696 IS - 4 SP - 9 EP - 12 PB - Verband Kinder- und Jugendarbeit CY - Hamburg ER - TY - RPRT A1 - Michael Sterner, A1 - Mareike Jentsch, A1 - Uwe Holzhammer, T1 - Energiewirtschaftliche und ökologische Bewertung eines Windgas-Angebotes N2 - In this technical report, (1) the benefits of the new technology for future energy supply are discussed, (2) the climate protection effect of wind gas is discussed, and (3) a reasonable use of wind energy for gas generation is analyzed. In particular, windgas in the heat market is discussed in the utilization cascade of wind energy. The new "power-to-gas" concept opens up completely new possibilities for the integration of renewable energies and for coupling the electricity and gas grids. The Sabatier process, which has been known for 100 years, was first developed for this purpose in 2008 under the leadership of the Center for Solar Energy and Hydrogen Research and Fraunhofer IWES (formerly ISET) with electrolysis to create the "power-to-gas" concept for energy storage. A first pilot plant was built by ZSW Stuttgart on behalf of SolarFuel in 2009. This plant proves the technical feasibility of the new technology. Renewable gas is stored, transported and used as required as control and reserve energy via reconversion, e.g. in combined cycle power plants. In this way, decentrally generated renewable electricity is converted into a CO2 -neutral energy carrier with high energy density. The key advantage of renewable methane is the use of existing infrastructure such as gas grids, gas storage and end-use equipment for the integration of renewable energy. Technologies for natural gas are state of the art and commercially available. Methane also has three times the energy density of hydrogen. T2 - Energy-economic and ecological evaluation of a windgas offer (Power-to-Gas) Y1 - 2011 U6 - https://doi.org/10.13140/RG.2.2.25093.68328 PB - Fraunhofer Institute for Energy Economics and Energy System Technology CY - Kassel ER - TY - CHAP A1 - Haug, Sonja ED - Haug, Sonja ED - Swiaczny, Frank T1 - Migration aus Mittel- und Osteuropa nach Deutschland BT - Trends und Emigrationspotential unter besonderer Berücksichtigung von Bulgarien T2 - Migration in Europa N2 - Im Zuge der EU-Ost-Erweiterung sind im Mai 2004 zehn Länder der EU beigetreten. Bulgarien und Rumänien sollen im Jahr 2007 folgen. Dieser Beitrag befasst sich mit der aktuellen und zukünftigen Entwicklung der Migration aus den mittel- und osteuropäischen EU-Beitrittsländern (MOEL) mit einem Schwerpunkt auf Bulgarien. Hierbei werden Ergebnisse des EU-Twinning-Light-Projektes „External Migration in Bulgaria – Analysing the development and consequences of the migration process” vorgestellt. Es wird ein Überblick über die Datenlage zur Migration zwischen den MOEL und Deutschland einerseits und zwischen Bulgarien und der EU bzw. Deutschland andererseits gegeben, wobei methodische Aspekte und die Datenqualität bewertet werden. Vorhersagen zukünftiger Migration werden anhand ökonomischer Schätzungen und Befragungen zum Migrationspotenzial dargelegt und kritisch beurteilt. Ausführlich wird auf Ergebnisse des bulgarischen Zensus 2001 zum Emigrationspotential in der Bevölkerung eingegangen. Das Migrationspotenzial der MOEL, die Konsequenzen für die Herkunftsländer unter dem Gesichtspunkt eines möglichen „Brain Drains“ und die Steuerungsmöglichkeiten werden diskutiert. Y1 - 2005 UR - https://nbn-resolving.org/urn:nbn:de:0168-ssoar-331157 SP - 133 EP - 151 ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland T1 - Example 4: Strengthening a reinforced concrete column by wrapping T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstofffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 115 EP - 125 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - BOOK A1 - Haug, Sonja T1 - Menschen mit Migrationshintergrund BT - Theorie und Empirie der Migration Y1 - 2009 PB - Hamburger Fern-Hochschule (HFH) CY - Hamburg ER - TY - CHAP A1 - Rill, Daniel A1 - Butz, Christiane A1 - Rill, Georg ED - Kecskeméthy, Andrés ED - Geu Flores, Francisco T1 - Dynamic Interaction of Heavy Duty Vehicles and Expansion Joints T2 - Multibody Dynamics 2019, Proceedings of the 9th ECCOMAS Thematic Conference on Multibody Dynamics N2 - The “Smart Bridge (Intelligente Brücke)” project cluster, initiated by the German Federal Highway Research Institute (Bundesanstalt für Straßenwesen, BASt) and the Federal Ministry of Transport and Digital Infrastructure (BMVI), focuses on “smart” monitoring devices that allow an efficient and economic maintenance management of bridge infrastructures. Among the participating projects, the one presented herein focuses on the development of a smart expansion joint, to assess the traffic parameters on site. This is achieved by measuring velocity and weight of crossing vehicles. In reference measurements, performed with a three-axle truck and a typical tractor semi-trailer combination with five axles in total, it was shown that the interaction between the vehicle and the expansion joint is highly dynamic and depends on several factors. To get more insight into this dynamic problem, a virtual test rig was set up. Although nearly all vehicle parameters had to be estimated, the simulation results conform very well with the measurements and are robust to vehicle parameter variations. In addition, they indicate a significant influence of the expansion joint dynamic to the peak values of the measured wheel loads, in particular on higher driving velocities. By compensating the relevant dynamic effects in the measurements, a “smart” data processing algorithm makes it possible to determine the actual vehicle weights in random traffic with reliability and appropriate accuracy. Y1 - 2020 SN - 978-3-030-23131-6 U6 - https://doi.org/10.1007/978-3-030-23132-3_56 VL - 53 SP - 471 EP - 478 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland A1 - Schmitt, Alexander A1 - Zilch, Konrad ED - Zilch, Konrad T1 - Beispiel 3: Verstärkung eines Plattenbalkens mit aufgeklebten CFK-Lamellen T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 83 EP - 108 PB - Beuth CY - Berlin ER - TY - JOUR A1 - Linner, Thomas A1 - Seelinger, Anja A1 - Vogt Lydia, A1 - Schäpers Barbara, A1 - Steinböck, Martina A1 - Krewer, Carmen A1 - Bock, Thomas T1 - REACH: Solutions for Technology-Based Prevention and Empowerment for Older People and their Caregivers JF - Journal of Population Ageing: Special Issue on responsive engagement of older persons promoting activity and customized healthcare N2 - REACH stands for “Responsive Engagement of the Elderly Promoting Activity and Customized Healthcare”. Sustained physical activity matters greatly to the health and well-being of older people and significantly improves their chance of maintaining independent living. It can make a difference across the whole care continuum as well as in almost every setting. Therefore, REACH solutions focus on the systematic, target-oriented increase of physical activity of older people, and tackle the whole prevention spectrum (primary, secondary, and tertiary). It seeks to empower older people and their formal and informal caregivers, and works towards viable solutions for both the formal and in-formal care sector. Technology-based personalization of prevention, activation, and care services provided in various living and care settings is at the center of the developed solutions. Ideally toolkit approach would allow for the tailoring of solutions that create value for end-users, care providers and health care payers alike through the combination, integration and adaptation/re-design elements towards the different contexts of different countries, different payment and reimbursement structures. This Special Issue sheds light on such solutions, their conception, their development, and their testing. Y1 - 2020 U6 - https://doi.org/10.1007/s12062-020-09268-5 VL - 13 IS - 1 SP - 131 EP - 137 PB - Springer Nature ER - TY - CHAP A1 - Baumann, Timo A1 - Siegert, Ingo ED - Alt, Florian ED - Schneegass, Stefan ED - Hornecker, Eva T1 - Prosodic addressee-detection : ensuring privacy in always-on spoken dialog systems T2 - Tagungsband Mensch und Computer (MuC'20): 06.09.2020 - 09.09.2020, Magdeburg N2 - We analyze the addressee detection task for complexity-identical dialog for both human conversation and device-directed speech. Our recurrent neural model performs at least as good as humans, who have problems with this task, even native speakers, who profit from the relevant linguistic skills. We perform ablation experiments on the features used by our model and show that fundamental frequency variation is the single most relevant feature class. Therefore, we conclude that future systems can detect whether they are addressed based only on speech prosody which does not (or only to a very limited extent) reveal the content of conversations not intended for the system. KW - addressee detection KW - complexity-identical human-computer interaction KW - computational paralinguistics KW - fundamental frequency variation KW - recurrent neural network Y1 - 2020 SN - 9781450375405 U6 - https://doi.org/10.1145/3404983.3410021 SP - 195 EP - 198 PB - Association for Computing Machinery CY - New York, NY, United States ER - TY - GEN A1 - Singh, Max Diamond T1 - Reclassification of Orthopedic Devices per the Medical Device Regulation T2 - OSMA Winter Educational Program, St. Petersburg/USA, 2019. - [Veranstalter: Orthopedic Surgical Manufacturers Association (OSMA)] Y1 - 2019 ER - TY - CHAP A1 - Bittner, Peter A1 - Hornecker, Eva A1 - Twisselmann, Ute A1 - Weber, Karsten ED - Dittrich, Klaus T1 - Die berufliche Situation informatisch Handelnder in der ethischen Reflexion T2 - Informatik 2003 - Innovative Informatikanwendungen, Band 2 der Beiträge der 33. Jahrestagung der Gesellschaft für Informatik e.V. (GI), 29. September - 2. Oktober 2003 in Frankfurt am Main N2 - Ausgehend von einer Betrachtung des Einflusses von InformatikerInnen und ihren Handlungsmustern auf Arbeitsprozesse und vor dem Hintergrund einer kritischen Auseinandersetzung mit bisherigen berufsethischen Leitlinien wollen wir einen neuen Ansatz wagen, über Informatik und Verantwortung nachzudenken. Eine Rekonstruktion des Begriffs Verantwortung bietet uns ein reichhaltiges begriffliches Instrumentarium zur Reflexion des Verhältnisses von Verantwortung und informatischer Praxis. Wir plädieren dafür, dass informatisch Handelnde lernen müssen, ethische Probleme zu erkennen, implizite Annahmen von Arbeitskulturen zu durchschauen und ein Bewusstsein für die Veränderbarkeit dieser Arbeitskulturen entwickeln sollten. Zusätzlich bedarf es kollektiver und rechtlicher Veränderungen der Rahmenbedingungen für verantwortliches Handeln. Y1 - 2003 UR - https://dl.gi.de/handle/20.500.12116/29680 SP - 176 EP - 181 ER - TY - CHAP A1 - Rudolph, Clarissa ED - Kurz-Scherf, Ingrid ED - Lepperhoff, Julia ED - Scheele, Alexandra T1 - Frauen- und Gleichstellungspolitik: Gesellschaftlicher Wandel durch Institutionen? T2 - Feminismus: Kritik und Intervention Y1 - 2009 UR - https://www.oth-regensburg.de/fileadmin/media/professoren/s/rudolph/Kurz-Scherf_ua_2009.pdf SN - 978-3-89691-777-5 SP - 115 EP - 132 PB - Westfälisches Dampfboot CY - Münster ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Querkrafttragfähigkeit von historisch mit Betonstabstahl bewehrten und mit geklebter Bewehrung biegeverstärkten Betonbauteilen Y1 - 2012 UR - https://www.irbnet.de/daten/rswb/12059022426.pdf SN - 978-3-8167-8707-5 PB - Fraunhofer IRB Verlag CY - Stuttgart ER - TY - JOUR A1 - Knödler, Christoph T1 - Zur Korrektur der Korrektur - die Berichtigung schriftlicher juristischer Prüfungsarbeiten JF - Juristische Schulung - JuS Y1 - 1995 IS - 4 SP - 365 EP - 371 PB - C.H. Beck CY - München ER - TY - CHAP A1 - Deubzer, Michael A1 - Hobelsberger, Martin A1 - Mottok, Jürgen A1 - Schiller, Frank A1 - Dumke, Reiner A1 - Siegle, Markus A1 - Margull, Ulrich A1 - Niemetz, Michael A1 - Wirrer, Gerhard T1 - Modeling and Simulation of Embedded Real-Time Multi-Core Systems T2 - Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen KW - Real-Time Systems KW - Multicore KW - Model-Driven Development KW - Architecture Description Language KW - Simulation Y1 - 2010 UR - https://www.unibw.de/technische-informatik/mitarbeiter/professoren/siegle/publikationen/ese2010_muco_modsim.pdf ER - TY - JOUR A1 - Schramm, Simon A1 - Pieper, Matthias A1 - Vogl, Stefanie T1 - Orthogonal Procrustes and Machine Learning: Predicting Bill of Materials errors on time JF - Computers & Industrial Engineering N2 - In an industrial product development process, the Bill of Materials (BOM) is a hierarchical, multi-level representation of all components, parts and quantities of a product. With increasing complexity of industrial products, also BOMs become more complex and thus prone to errors, for example when the individual parts of a product are changed during the product development process. Frequently, these Bill of Materials errors have to be identified manually or by using simple, rule-based schemes. In this paper, we provide a technical background of BOMs, showing the intricacy of temporal BOMs errors in an industrial product development process. The work of other authors, which focused on association mining and tree reconciliation to detect Bill of Materials errors, is analysed. We found that there is currently no system being able to prescribe where in a Bill of Materials and when in the product development process, errors are probable to occur. Also, Machine Learning (ML) methods have not been applied yet. Based on these findings, we formalize the notions Bill of Materials and Bill of Materials errors. Furthermore, we present a deterministic distance measure for BOMS. We provide an answer to the main question of how to represent a Bill of Materials for Machine Learning tasks by solving the orthogonal Procrustes problem for dynamic, hierarchical datasets. Then, we describe an isolation forest based approach to temporal anomaly detection, which points at potential errors in a Bill of Materials at a specific timestamp. Furthermore, we apply Machine Learning and present a multi-output Multi Layer Perceptron for the prediction of temporal Bill of Materials errors. The model predicts where and at which point of time Bill of Materials errors are probable to occur, which renders it a prescriptive system. Eventually, we optimize the performance of our model using contextualization via -means clustering. Finally, we apply our prescriptive pipeline to a real world dataset and show its superiority to existing methods using a qualitative comparison. Y1 - 2023 U6 - https://doi.org/10.1016/j.cie.2023.109606 VL - 185 PB - Elsevier ER - TY - JOUR A1 - Schwab, E. A1 - Pogrebnoj, S. A1 - Freund, M. A1 - Flossmann, F. A1 - Vogl, Stefanie A1 - Frommolt, K.-H. T1 - Automated bat call classification using deep convolutional neural networks JF - Bioacoustics N2 - Identification of bats is most practically done by exploiting the characteristic features of their echolocation calls. This usually involves expert knowledge, expensive equipment and time-consuming post processing of previously recorded calls. Automated solutions exist, but are usually not as accurate as human experts. We present an automated solution for the processing of bat calls and identification of bat species with extremely high classification accuracy that can be used during live recording or in an automated post-processing software. Our algorithm is the first application of a Deep Convolutional Neural Network to classify bat species based on sound spectrogram images of their echolocation calls. We tested several deep CNN architectures including a modified Google Inception and a ResNet50 architecture. The nets were trained on a very large call database consisting of images of snippets of call spectrograms. All our software was developed in the Python programming language and an executable of the software is available on request. KW - image classification KW - Bat call KW - neural network KW - secholocation Y1 - 2022 U6 - https://doi.org/10.1080/09524622.2022.2050816 SP - 1 EP - 16 PB - Taylor & Francis ER - TY - INPR A1 - Menzel, Andreas A1 - Yeh, Wang-Chi Vincent A1 - Kammler, Martin A1 - Hupalo, Myron A1 - Conrad, E. H. A1 - Tringides, Michael C. T1 - Measurements of the kinetic barriers controlling the formation of the uniform height islands in Pb/Si(111) N2 - As demonstrated with SPA-LEED and STM uniform height islands of preferred thickness form during the growth of Pb on Si(111). The islands form at temperatures T<250K and for fluxes F 1/60ML/sec which requires fast kinetics and balance between several atomic processes: diffusion towards the islands , diffusion to higher layers and preference for the atoms to remain on top of the preferred height islands. We have carried out SPA-LEED experiments to measure the barriers of the processes: we prepare an initial predominantly 5-step island height distribution and we deposit an additional 0.5ML Pb at different growth temperatures Tg to determine the transition to the next preferred height of 7-step islands (i.e. 2-step islands on top of the 5-step islands) with Spot Profile Analysis(SPA-LEED). We observe that 7-step island formation is possible above a minimum temperature Tg*=175K which indicates that the transfer of atoms from the surrounding region to the top of the islands is the main controlling process. Y1 - 2002 UR - https://www.researchgate.net/publication/259264144_Measurements_of_the_kinetic_barriers_controlling_the_formation_of_the_uniform_height_islands_in_PbSi111 ER - TY - INPR A1 - Cavalleri, Andrea A1 - Siders, Craig A1 - Toth, Csaba A1 - Squier, Jeff A. A1 - Barty, C. P. J. A1 - Wilson, K. R. A1 - Sokolowski-Tinten, Klaus A1 - von der Linde, Dietrich A1 - Kammler, Martin A1 - Horn- von Hoegen, Michael T1 - Measurement of harmonic and anharmonic semi-conductor-lattice dynamics with ultrafast x-ray diffraction N2 - Many fundamental processes in solids, such as heat transport and phase transitions involve atomic movement on ultrafast time-scales, but cannot be directly measured with visible light. Using ultrafast x-ray diffraction, atomic motion can be measured on its natural time-scale. Photo-excitation of bulk and layered semiconductors was achieved with 800-nm wavelength femtosecond laser pulses. Optical excitation triggers a chain of relaxation processes, causing rapid lattice heating, generation and propagation of stress/strain waves into the bulk and eventual anharmonic decay of coherent acoustic phonons into the thermal bath of the solid. While the first steps of carrier relaxation, excitation and decay of Raman-active optical phonons have been in the past characterized optically at surfaces, the bulk acoustic dynamics at longer times has not. We measure length scales of lattice excitation, thereby detecting ultrafast heat diffusion via fast electrons, coherent acoustic pulse propagation into the bulk or across buried interfaces and anharmonic damping of non-equilibrium acoustic phonons. The measurement is performed with sensitivity on lattice spacing of 10 femtometers (i.e., 3 nuclear diameters). Y1 - 2000 UR - https://www.researchgate.net/publication/252175863_Measurement_of_harmonic_and_anharmonic_semi-conductor-lattice_dynamics_with_ultrafast_x-ray_diffraction ER - TY - CHAP A1 - Nobre, J. P. A1 - Noster, Ulf A1 - Gibmeier, J. A1 - Altenberger, Igor A1 - Kornmeier, M. A1 - Dias, A. A1 - Scholtes, Berthold ED - Kainer, Karl U. T1 - Mechanical Behavior and Residual Stresses in AZ31 Wrought Magnesium Alloy Subjected to Four Point Bending T2 - Magnesium Alloys and Their Applications N2 - Several specimens of AZ31 magnesium alloy were taken in different directions from a rolled plate and subjected to tensile, compressive and four-point bending tests. Tensile and compressive tests allowed to characterize the mechanical properties of the material in the rolling and cross rolling directions. The bending tests were carried out in four different specimen types to take the effect of the anisotropy induced by the rolling procedure itself into account. Six strain gages per specimen allowed to observe the evolution of the strain with the bending moment during the tests. All bending specimens were bent until a total compressive deformation of 2.5 %. It was observed that the corresponding tensile strain was significant lower and slightly different for each specimen type. In addition, a characteristic non-uniform distribution of deformation twinning was observed. The induced residual stresses after bending were characterized by X-ray diffraction (XRD) and incremental hole-drilling (IHD). Due to the different mechanical behavior in tension and compression, an asymmetric residual stress distribution after bending could be observed. The neutral axis was, in all cases, shifted towards the tensile side. This observation agrees with the strain measurements during bending tests. Y1 - 2006 SN - 9783527607556 U6 - https://doi.org/10.1002/3527607552.ch53 SP - 336 EP - 341 PB - Wiley CY - Hoboken ER - TY - CHAP A1 - Westner, Markus T1 - Antecedents of success in IS offshoring projects BT - Proposal for an empirical research study T2 - Proceedings of the 17th European Conference on Information Systems (ECIS 2009), Verona N2 - The paper presents a research model and a measurement instrument for a research-in-progress study on the antecedents of success in IS offshoring projects. In this empirical-confirmatory study, we intend to analyse the impact of the constructs “offshoring expertise”, “trust in offshore service provider”, “project suitability”, “knowledge transfer”, and “liaison quality” on offshore project success. Constructs and indicators are derived from an extensive literature review. We plan to formulate a structural equation model and to test it using partial least squares (PLS) as an analysis technique. Our research model addresses the paucity of research that quantitatively examines offshoring success. KW - Informationstechnik KW - Offshoring KW - Methode der partiellen kleinsten Quadrate KW - Offshoring KW - Outsourcing KW - Project success KW - Partial least squares Y1 - 2009 UR - https://aisel.aisnet.org/cgi/viewcontent.cgi?article=1272&context=ecis2009 SP - 3104 EP - 3116 ER - TY - BOOK A1 - Westner, Markus T1 - IS offshoring BT - essays on project suitability and success N2 - Information systems (IS) offshoring describes the transfer of IS services to an offshoring service provider in a near or far away country. It has received growing attention in the past and there is a strong momentum in shifting IS services abroad. Markus Westner examines the IS offshoring phenomenon from the perspective of German companies. He first provides an overview of the current literature in the field of IS offshoring. Based on interviews with 47 industry experts, evaluation criteria for selecting projects for offshoring are identified. Finally, the author examines determinants of IS offshore project success in German companies based on a statistical analysis of 304 projects using structural equation modeling (PLS). KW - Informationssystem KW - Offshoring KW - Beschaffung KW - IT Strategie KW - Internationale Arbeitsteilung KW - Nearshoring KW - Offshore KW - Offshoring KW - Modeling Y1 - 2010 SN - 978-3-8349-2046-1 U6 - https://doi.org/10.1007/978-3-8349-8407-4 PB - Gabler CY - Wiesbaden ER - TY - RPRT A1 - Westner, Markus T1 - Information systems offshoring BT - A review of the literature KW - Informationstechnik KW - Offshoring Y1 - 2007 UR - https://fis.tu-dresden.de/portal/de/publications/information-systems-offshoring--a-review-of-the-literature(9fa44cab-24a3-4150-9ed0-cd73bec92d17).html CY - Dresden ER - TY - CHAP A1 - Westner, Markus ED - Picot, Arnold ED - Fischer, Tim T1 - Übersicht über aktuelle Weblog-Skripte und -Services T2 - Weblogs professionell : Grundlagen, Konzepte und Praxis im unternehmerischen Umfeld KW - Kommunikation KW - Unternehmen KW - Weblog KW - Wissensmanagement Y1 - 2007 SN - 978-3898643757 SP - 175 EP - 190 ER - TY - CHAP A1 - Westner, Markus A1 - Strahringer, Susanne T1 - Current state of IS offshoring research BT - A descriptive meta-analysis T2 - Mäkiö, Juho; Betz, Stefanie; Stephan, Rolf (Eds.): Offshoring of software development. Methods and tools for risk management. Karlsruhe: Universitätsverlag Karlsruhe N2 - This paper empirically examines the current state of the IS offshoring phenomenon in Germany regarding project characteristics and success patterns. Relying on a sample of 304 projects conducted at various industry sectors and companies, results show that IS offshoring primarily occurs in sectors Telecommunications and IT at large corporations. Cost reduction is the main reason for going offshore and offshore projects are executed as part of a larger program at companies. Noticeably, most projects are delivered from India. Additionally, neither captive offshoring nor offshore outsourcing dominates as a de-livery option. Comparing different project subgroups regarding project success, the results reveal that projects delivered by an internal or partially owned service provider are more successful. Other project characteristics such as a project’s embedded-ness in a larger offshoring program, a project’s size, or a project’s offshoring degree in terms of relatively offshored labor hours show few significant differences. The paper addresses the paucity of empirical research on the current state of the IS offshoring phenomenon in Germany. KW - Informationsmanagement KW - Offshoring KW - Erfolgsfaktor KW - Offshoring KW - Nearshoring KW - Informations systems sourcing KW - Outcome KW - Project success KW - Success factors Y1 - 2007 UR - http://jitm.ubalt.edu/XXI-1/article4.pdf SP - 7 EP - 22 ER - TY - CHAP A1 - Weber, Karsten ED - Robben, B. ED - Schelhowe, H. T1 - Bottom-Up Mixed-Reality: Emergente Entwicklung, Unkontrollierbarkeit und soziale Konsequenzen T2 - Be-greifbare Interaktionen - Der allgegenwärtige Computer: Touchscreens, Wearables, Tangibles und Ubiquitous Computing Y1 - 2012 UR - https://www.researchgate.net/publication/256474265_Bottom-Up_Mixed-Reality_Emergente_Entwicklung_Unkontrollierbarkeit_und_soziale_Konsequenzen U6 - https://doi.org/10.14361/transcript.9783839420058.347 U6 - https://doi.org/10.35096/othr/pub-434 SP - 347 EP - 366 PB - Transcript CY - Bielefeld ER - TY - JOUR A1 - Orwat, Carsten A1 - Raabe, Oliver A1 - Buchmann, Erik A1 - Anandasivam, Arun A1 - Freytag, Johan-Christoph A1 - Helberger, Natali A1 - Ishii, Kei A1 - Lutterbeck, Bernd A1 - Neumann, Dirk A1 - Otter, Thomas A1 - Pallas, Frank A1 - Reussner, Ralf A1 - Sester, Peter A1 - Weber, Karsten A1 - Werle, Raymund T1 - Software als Institution und ihre Gestaltbarkeit JF - Informatik-Spektrum N2 - Software regelt immer mehr zwischenmenschliche Interaktionen. Üblicherweise werden die Funktionsmechanismen, Wirkungen und Gestaltungsoptionen von Regeln in der Institutionenforschung behandelt. In diesem Artikel soll beleuchtet werden, inwieweit sich Ansätze der Institutionenforschung auf Software anwenden lassen und was sich aus dieser Forschungsperspektive zu den Regelungswirkungen und Gestaltungsoptionen von Software ableiten lässt. Y1 - 2010 U6 - https://doi.org/10.1007/s00287-009-0404-z VL - 33 IS - 6 SP - 626 EP - 633 ER - TY - JOUR A1 - Weber, Karsten T1 - Information Ethics in a Different Voice, Or BT - Back to the Drawing Board of Intercultural Information Ethics JF - IRIE - International Review of Information Ethics N2 - Within the information ethics community one can observe a mainstream discussion including some fundamental presuppositions which appear to be something like dogmas. The most important of these dogmas seems to be that we must create a new kind of intercultural information ethics. It is often argued that (comparative) studies have shown that different cultures, according to culturally determined norms and values, react in different ways to the impacts of ICT; it is stressed that an intercultural information ethics must take these cultural particularities into account. But in the paper at hand it shall be argued that taking cultural differences into consideration does not create a necessity to invent a new intercultural information ethics. On the contrary it shall be claimed that we already know several intercultural ethics which only have to be applied to ICT and its impact to societies. Y1 - 2010 VL - 13 IS - 1 SP - 6 EP - 11 ER - TY - JOUR A1 - Weber, Karsten T1 - New Mobile Devices and Surveillance BT - Questions Concerning Epistemology and Some New Challenges for Privacy and Data Protection JF - Postmodern Openings Journal N2 - Mobile devices help people to stay connected across huge distances and to socially interact while in spatially separated environments. However, compared to faceto-face-interaction, communication and interaction via mobile phones currently are still restricted. Therefore, an idea of Mann, Fung, and Lo concerning cyborglogging with camera phones shall be taken a step further. A scenario is described in which a modified version of their design is used to support social interaction across the borders of spatially separated environments in a new manner. It shall be argued that this might create a new understanding of being present at a certain place while at the same time it raises questions concerning privacy, surveillance and authenticity of experience. Y1 - 2012 VL - 3 IS - 3 ER - TY - JOUR A1 - Weber, Karsten A1 - Bittner, Uta A1 - Manzeschke, Arne A1 - Rother, Elisabeth A1 - Quack, Fredericke A1 - Dengler, Kathrin A1 - Fangerau, Heiner T1 - Taking Patient Privacy and Autonomy More Seriously BT - Why an Orwellian Account Is Not Sufficient JF - American Journal of Bioethics Y1 - 2012 U6 - https://doi.org/10.1080/15265161.2012.699147 VL - 12 IS - 9 SP - 51 EP - 53 ER - TY - JOUR A1 - Rödiger, Karl-Heinz A1 - Weber, Karsten T1 - und noch einmal: Was ist I&G? BT - Ein Blick zurück zur Klärung einer aktuellen Frage JF - FIfF Kommunikation Y1 - 2010 UR - https://www.researchgate.net/publication/263818401_und_noch_einmal_Was_ist_IG_Ein_Blick_zuruck_zur_Klarung_einer_aktuellen_Frage VL - 27 IS - 1 ER - TY - JOUR A1 - Weber, Karsten A1 - Drüeke, Ricarda T1 - Konvergente Medien, Fragmentierung der Öffentlichkeit und medienethische Anmerkungen JF - Zeitschrift für Kommunikationsökologie und Medienethik Y1 - 2010 VL - 12 IS - 1 SP - 1 EP - 7 ER - TY - JOUR A1 - Weber, Karsten T1 - Gewalt in den Medien BT - methodologische, wissenschaftstheoretische und medienethische Reflektionen JF - Ethica Y1 - 2010 VL - 18 IS - 2 SP - 1 EP - 17 ER - TY - JOUR A1 - Bittner, Peter A1 - Capurro, Rafael A1 - Coy, Wolfgang A1 - Hornecker, Eva A1 - Kurz, Constanze A1 - Rödiger, Karl-Heinz A1 - Schinzel, Britta A1 - Twisselmann, Ute A1 - Vollmar, Rainer A1 - Weber, Karsten A1 - Winter, Alfred A1 - Winter, Cornelia T1 - Ethische Leitlinien der GI BT - Entwurf des Arbeitskreises "Verantwortung" JF - Informatik Spektrum N2 - Seit Ihrer Verabschiedung im Jahr 1994 waren die Ethischen Leitlinien der Gesellschaft für Informatik Gegenstand zuweilen kontroverser Diskussionen. Einerseits wurde begrüßt, dass sich die GI verbindlich an ein ethisches Regelwerk bindet und dadurch ihren Mitgliedern einen Leitfaden an die Hand gibt, um in Konfliktsituationen besser entscheiden zu können. Andererseits wurde bemängelt, dass die Ethischen Leitlinien Forderungen stellten, die für professionelles Handeln unabdingbar seien und deshalb keine ethischen Ansprüche darstellten. Des Weiteren wurde kritisiert, dass die Ethischen Leitlinien zu sehr im Abstrakten verharrten und deshalb keine konkrete Handlungsanweisung geben könnten. Die fachlichen und überfachlichen Anforderungen wurden zuweilen als zu anspruchsvoll empfunden. Einige dieser Kritikpunkte sind sicherlich berechtigt. Im November 2001 begann der Arbeitskreis „Informatik und Verantwortung“ im Fachbereich Informatik und Gesellschaft (IuG) mit der Überarbeitung der Ethischen Leitlinien. Der hier vorgelegte Entwurf greift einige dieser Kritikpunkte auf. Seine Publikation soll eine breitere Diskussion innerhalb der GI ermöglichen. Die Autorinnen und Autoren dieses Entwurfs freuen sich auf diese Auseinandersetzung, die in der letzten Sitzung des Arbeitskreises durch den Vertreter der Selbständigen in der GI mit dem Hinweis begonnen wurde, dass den Leitlinien ein Berufsbild zugrunde liegt, in dem die Selbständigen nicht vorkommen. Die anlässlich der Informatik 2003 gegründete Fachgruppe “Informatik und Ethik“ wird sich zu ihrer ersten Aufgabe machen, die Ergebnisse dieser Diskussion in die endgültige Version einfließen zu lassen. Entsprechende Diskussionsbeiträge und Anregungen sollten an Karl-Heinz Rödiger (E-Mail: roediger@informatik.uni-bremen.de), kommissarischer Sprecher der Fachgruppe, gerichtet werden. Y1 - 2003 U6 - https://doi.org/10.1007/s00287-003-0346-9 VL - 26 IS - 6 ER - TY - JOUR A1 - Haug, Sonja A1 - Weber, Karsten T1 - Tauschnetzwerke im Internet und im Freundeskreis: Eine empirische Untersuchung der Wirksamkeit der Reziprozitätsnorm beim Tauschen. Teil II: Ergebnisse der Online-Befragung JF - kommunikation@gesellschaft N2 - Der folgende Beitrag behandelt das Problem der Reziprozität beim Tausch. Dabei wird ausgehend von der Rational-Choice-Theorie argumentiert, dass Vor- und Gegenleistungen beim generalisierten Tausch riskant sind und die Entstehung und Aufrechterhaltung eines Tauschsystems einem Trittbrettfahrerproblem unterliegt. Demzufolge wäre der Tausch unter Freunden wahrscheinlicher als der Tausch unter Bedingungen der (relativen) Anonymität, wie sie im Internet und den dort existierenden File-Sharing-Systmen vorliegen. Nichtsdestotrotz treten Tauschhandlungen in File-Sharing-Systemen im Internet häufig auf. Das Ziel liegt in einer Erklärung dieses Phänomens. Teil I umfasst den theoretischen Hintergrund einer empirischen Studie zu Bestimmungsfaktoren der Reziprozität beim Tausch unter Freunden und in Internet-Tauschbörsen. In einem zweiten Teil des Beitrags (Haug/Weber 2003b) wird eine Einführung in die Funktionsweise von Internet-Tauschbörsen gegeben sowie die Ergebnisse der Online-Befragung vorgestellt. KW - Tausch KW - soziales Netzwerk KW - soziales Dilemma KW - Musik KW - Rational-Choice-Theorie KW - Reziprozität KW - Ethik KW - Gruppe KW - Freundschaft KW - virtuelle Gemeinschaft KW - Hacker Y1 - 2003 UR - https://www.ssoar.info/ssoar/handle/document/12806 VL - 4 SP - 1 EP - 23 ER - TY - JOUR A1 - Haug, Sonja A1 - Weber, Karsten T1 - Tauschnetzwerke im Internet und im Freundeskreis: Eine empirische Untersuchung der Wirksamkeit der Reziprozitätsnorm beim Tauschen. Teil I: Bestimmungsfaktoren der Reziprozität beim Tauschen JF - kommunikation@gesellschaft N2 - Der folgende Beitrag behandelt das Problem der Reziprozität beim Tausch. Dabei wird aus-gehend von der Rational-Choice-Theorie argumentiert, dass Vor- und Gegenleistungen beim generalisierten Tausch riskant sind und die Entstehung und Aufrechterhaltung eines Tauschsystems einem Trittbrettfahrerproblem unterliegt. Demzufolge wäre der Tausch unter Freunden wahrscheinlicher als der Tausch unter Bedingungen der (relativen) Anonymität, wie sie im Internet und den dort existierenden File-Sharing-Systmen vorliegen. Nichtsdestotrotz treten Tauschhandlungen in File-Sharing-Systemen im Internet häufig auf. Das Ziel liegt in einer Erklärung dieses Phänomens. Teil I umfasst den theoretischen Hintergrund einer empirischen Studie zu Bestimmungsfaktoren der Reziprozität beim Tausch unter Freunden und in Internet-Tauschbörsen. In einem zweiten Teil des Beitrags (Haug/Weber 2003b) wird eine Einführung in die Funktionsweise von Internet-Tauschbörsen gegeben sowie die Ergebnisse der Online-Befragung orgestellt. KW - Tausch KW - soziales Netzwerk KW - soziales Dilemma KW - Musik KW - Ethik KW - Reziprozität KW - Rational-Choice-Theorie KW - Hacker KW - Gruppe Y1 - 2003 UR - https://www.ssoar.info/ssoar/handle/document/12805 VL - 4 SP - 1 EP - 14 ER - TY - CHAP A1 - Weber, Karsten T1 - Von den Grenzen der "grenzenlosen" Freiheit der elektronischen Möglichkeiten - Wo bleibt der Mensch? T2 - Informationes Theologiae Europae - Internationales ökumenisches Jahrbuch der Theologie N2 - Sowohl in öffentlichen Debatten wie auch in wissenschaftlichen Diskussionen wird Informationsund Kommunikationstechnologie häufig als eine Gefahr für unser Leben angesehen. Insbesondere wird vor der Erosion der Privatsphäre, vor Autonomie- und Freiheitsverlusten gewarnt. Informations- und Kommunikationstechnologie, so wird behauptet, wird unbegrenzte Möglichkeiten allgegenwärtiger Überwachung und Kontrolle bieten und zur Wandlung der Menschen vom Subjekt der Technikgestaltung zum durch Technik determinierten Objekt beitragen. Um dies zu verhindern, wird häufig nach mehr order minder restriktiver Regulierung gerufen. Im Folgenden soll jedoch gezeigt werden, dass gerade eine solche Regulierung jene Ängste wahr werden lassen könnte. Y1 - 2006 UR - https://www.researchgate.net/publication/256474441_Von_den_Grenzen_der_grenzenlosen_Freiheit_der_elektronischen_Moglichkeiten_-_Wo_bleibt_der_Mensch VL - 15 SP - 83 EP - 99 ER - TY - JOUR A1 - Weber, Karsten T1 - Social Aspects of Non-Proprietary Software JF - IJIE, International Journal of Information Ethics N2 - This paper shall give a brief history of Free Software and Open Source, then shall describe the background philosophy of these social movements and the social aspects of the non-proprietary software community in more detail, and address possible problems which could arise, for instance, for public funding of non-proprietary software development or for concepts of responsibility in the ethics of technology. Finally, a possible future of non-proprietary software shall be outlined, which strongly differs from the bright forecasts of the mainstream Open Source and Free Software supporters. Y1 - 2004 UR - http://www.i-r-i-e.net/inhalt/002/ijie_002_full.pdf SN - 1614-1687 VL - 2 IS - 11 SP - 1 EP - 8 ER - TY - CHAP A1 - Weber, Karsten ED - Lingner, Stephan ED - Lutterbeck, Bernd ED - Pallas, Frank T1 - Reichweite und Grenzen der Technikfolgenabschätzung und Technikgestaltung T2 - Die Zukunft der Räume. Gesellschaftliche Fragen auf dem Weg zur Ambient Intelligence Y1 - 2010 UR - https://www.researchgate.net/publication/260824266_Die_Zukunft_der_Raume_Gesellschaftliche_Fragen_auf_dem_Weg_zur_Ambient_Intelligence SP - 53 EP - 65 PB - Europäische Akademie zur Erforschung von Folgen wissenschaftlich-technischer Entwicklungen Bad Neuenahr-Ahrweiler GmbH CY - Bad Neuenahr-Ahrweiler ER - TY - JOUR A1 - Nagenborg, Michael A1 - Weber, Karsten T1 - Der Wandel der Medienanbieter und die Notwendigkeit eines Paradigmenwechsels in der Medienethik JF - Zeitschrift für Kommunikationsökologie und Medienethik Y1 - 2005 SN - 1861-2687 VL - 7 IS - 1 ER - TY - JOUR A1 - Nagenborg, Michael A1 - Weber, Karsten T1 - Wer und wo bist Du, wenn Du über das Internet sprichst? JF - Information: Wissenschaft und Praxis Y1 - 2004 VL - 55 IS - 8 SP - 489 EP - 490 ER - TY - JOUR A1 - Weber, Karsten T1 - Die Schließung der digitalen Spaltung BT - Anspruch und Wirklichkeit JF - Ethica Y1 - 2004 SN - 1021-8122 VL - 12 IS - 2 SP - 115 EP - 136 ER - TY - CHAP A1 - Weber, Karsten ED - Gaycken, Sandro ED - Kurz, Constanze T1 - Informationsethik und technisierte Überwachung T2 - 1984.exe - Gesellschaftliche, politische und juristische Aspekte moderner Überwachungstechnologien Y1 - 2008 UR - https://content-select.com/de/portal/media/view/56d4235b-7c14-45ce-b9a9-6642b0dd2d03?forceauth=1 SP - 283 EP - 302 PB - Transcript CY - Bielefeld ER - TY - CHAP A1 - Weber, Karsten ED - Daub, H. T1 - Erkenntniswege in der Wissenschaft T2 - Grenzen menschlicher Existenz. Klimawandel - Menschenwürde - Unschärferelation Y1 - 2008 UR - https://www.researchgate.net/publication/256474612_Erkenntniswege_in_der_Wissenschaft PB - Michael-Imhof CY - Fulda ER - TY - CHAP A1 - Weber, Karsten ED - Lehner, C. ED - Ohly, Heinz Peter ED - Rahnstorf, G. T1 - Aufgaben für eine globale Wissensgesellschaft oder "Welcome to the new IT?" T2 - Wissensorganisation und Edutainment: Wissen im Spannungsfeld von Gesellschaft, Gestaltung und Industrie N2 - Nicht nur in der wissenschaftlichen, sondern auch oder gerade in der öffentlichen Diskussion wird viel von der „Wissensgesellschaft“ gesprochen. Einmal davon abgesehen, dass dieser Ausdruck oftmals mit ganz verschiedenen Intentionen benutzt wird – so im Hinblick auf die Notwendigkeit, in der Arbeitswelt lebenslang zu lernen, auf die Wissensgeladenheit vieler neuer Produkte oder auf die Verlagerung von Bildungsprozessen von Schulen und Universitäten ins Internet –, ist bei genauerer Betrachtung nicht klar, wo Wissensgesellschaften existieren, im Entstehen begriffen sind oder entstehen könnten, d. h. welche Gesellschaften den Transformationsprozess von der XYZ- zur Wissensgesellschaft in der Vergangenheit schon vollzogen haben, gerade vollziehen oder in Zukunft vollziehen werden. Es ist auch nicht klar, ob es nur eine oder viele Wissensgesellschaften gibt, geben soll oder geben wird. Schon aus diesen wenigen Bemerkungen wird ersichtlich, dass die Rede von der (globalen) Wissensgesellschaft ähnlich wie jene von der Globalisierung alles andere als klar ist. In einem Überblick soll im Folgenden deshalb versucht werden, diese Unklarheiten zumindest ein wenig zu beseitigen. Es wird dabei deutlich, dass sich selbst nur lokale Wissensgesellschaften im Grunde allenfalls in statu nascendi befinden und eine globale Wissensgesellschaft noch in weiter Ferne liegt oder gar eine nicht zu realisierende Utopie darstellt. Zunächst wird der status quo beschrieben, also die große Ungleichheit in der Möglichkeit der Internetnutzung, global und auf das geografische Europa bezogen. Danach wird versucht, anzudeuten, welche Probleme gelöst werden müssten, damit diese Ungleichgewichtung abgebaut werden kann oder doch zumindest nicht noch größer wird. Zuletzt soll der Entwurf einiger Grundsätze aufgezeigt werden, die für die Gestaltung lokaler Wissensgesellschaften handlungsleitend sein sollten und meines Erachtens notwendige Bedingungen der Möglichkeit sowohl lokaler als auch globaler Wissensgesellschaften darstellen. Der damit verbundene normative Anspruch wird dabei mit der Annahme begründet, dass sich Informationen, Wissen und Bildung in der immer komplexer werdenden Welt zu Grundgütern entwickelt haben, ohne die auf der personalen Ebene ein gelungenes Leben kaum noch zu führen ist und ohne die auf der Ebene der Gemeinwesen eine Entwicklung ökonomisch benachteiligter Länder und Regionen beeinträchtigt oder gar verunmöglicht wird bzw. die schon hochindustrialisierten Staaten den bisher erreichten Lebensstandard nicht halten werden können. Y1 - 2004 UR - https://www.researchgate.net/publication/263818607_Aufgaben_fur_eine_globale_Wissensgesellschaft_oder_Welcome_to_the_new_IT PB - Ergon CY - Würzburg ER - TY - CHAP A1 - Weber, Karsten ED - Dittrich, Klaus T1 - Ethische Leitlinien: inhaltlich oder prozedural? T2 - Informatik 2003 - Innovative Informatikanwendungen, Band 2 der Beiträge der 33. Jahrestagung der Gesellschaft für Informatik e.V. (GI), 29. September - 2. Oktober 2003 in Frankfurt am Main N2 - Der neue Entwurf der ethischen Leitlinien nimmt in der Präambel Bezug auf die Allgemeine Erklärung der Menschenrechte der Vereinten Nationen; außerdem wird mit Artikel 11 die soziale Verantwortung von Informatikerinnen und Informatikern inhaltlich ausformuliert. Infrage steht nun, ob die Explizierung solcher moralischer Forderungen in den ethischen Leitlinien akzeptabel ist oder ob damit nicht deren Möglichkeiten überdehnt werden. Anders ausgedrückt: Sollen die ethischen Leitlinien rein prozedural ausgerichtet sein oder stattdessen konkrete Zielvorgaben formuliert werden? Um diese Frage zu beantworten, werden zunächst die genannten Alternativen der Formulierung dargestellt. Dem folgt eine kritische Auseinandersetzung mit dem neuen Artikel 11 und dem Bezug auf die Allgemeine Erklärung der Menschenrechte. Zuletzt werden Gründe und Bedingungen für die Akzeptabilität dieser und gegen eine Aufnahme weitergehender moralischer Forderungen genannt. Y1 - 2003 UR - https://dl.gi.de/handle/20.500.12116/29682 SP - 188 EP - 193 PB - Gesellschaft für Informatik e.V. CY - Bonn ER - TY - CHAP A1 - Weber, Karsten ED - Frank, Ulrich T1 - Der wissenschaftstheoretische Status von Simulationen T2 - Wissenschaftstheorie in Ökonomie und Wirtschaftsinformatik. Theoriebildung und -bewertung, Ontologien, Wissensmanagement N2 - Computersimulationen — hier wird häufig nur noch von Simulationen gesprochen — haben sich in vielen wissenschaftlichen und technischen Bereichen zu unverzichtbaren Werkzeugen für Forschung und Entwicklung entwickelt. Sie stellen ein mächtiges Werkzeug zur Untersuchung von Abläufen in ganz verschiedenen Disziplinen dar — von der Kosmologie bis zur Ökonomie — und scheinen die Grenzen der Wissenschaft weiter hinauszuschieben. Allerdings muss konstatiert werden, dass die Verwendung von Simulationen im Forschungsprozess häufig unkritisch geschieht und wichtige wissenschaftstheoretische Einwände nicht beachtet werden. Diese sollen zunächst allgemein dargestellt sowie kritisch diskutiert und danach Konsequenzen für die Wirtschaftsinformatik genannt werden*. KW - Computersimulation KW - Wissenschaftstheorie Y1 - 2004 U6 - https://doi.org/10.1007/978-3-322-81127-1_9 PB - DUV CY - Wiesbaden ER - TY - CHAP A1 - Weber, Karsten ED - Scheule, Rupert M. ED - Capurro, Rafael ED - Hausmanninger, Thomas T1 - Non-proprietäre Software und Geschenkökonomie: Lösungen für die digitale Spaltung? T2 - Vernetzt gespalten. Der Digital Divide in ethischer Perspektive Y1 - 2004 UR - https://digi20.digitale-sammlungen.de/de/fs1/object/goToPage/bsb00042699.html?pageNo=188 SP - 189 EP - 197 PB - Fink CY - München ER - TY - CHAP A1 - Weber, Karsten ED - Aleksandrowicz, Dariusz ED - Czapara, M. T1 - Vom Nutzen und Schaden der Religion für freiheitliche Gesellschaften T2 - Religion, Ethics and Public Education - Religion, Ethik und öffentliche Bildung - Religia, etyka i edukacja publiczna T2 - On Benefits and Burdens of Religion for Free Societies Y1 - 2012 UR - https://www.researchgate.net/publication/263818662_Vom_Nutzen_und_Schaden_der_Religion_fur_freiheitliche_Gesellschaften IS - 4 SP - 1 EP - 22 PB - Peter Lang CY - Frankfurt am main ER - TY - CHAP A1 - Weber, Karsten ED - Lutterbeck, Bernd ED - Gehring, Robert A. T1 - Philosophische Grundlagen und mögliche Entwicklungen der Open Source- und Free Software-Bewegung T2 - Open Source Jahrbuch 2004. Zwischen Softwareentwicklung und Gesellschaftsmodell Y1 - 2004 UR - http://www.opensourcejahrbuch.de/download/jb2004/chapter_05/V-4-Weber.pdf PB - Lehmanns Media CY - Berlin ER -