TY - CHAP A1 - Chow, Rosan ED - Verbeke, Johan ED - Jakimowicz, Adam T1 - Abduction Revisited T2 - Proceedings of the colloquium ‘Communicating (by) Design’, Sint-Lucas Brussels, 15th - 17th April 2009 Y1 - 2009 UR - https://arch.kuleuven.be/onderzoek/publicaties/communicating-by-design SN - 9789081323802 SP - 193 EP - 197 PB - Chamlers University of Technology & Hogeschool voor Wetenshcp & Kunst CY - Brussels ER - TY - CHAP A1 - Chow, Rosan A1 - Bredies, Katharina ED - Lam, Felix T1 - Some Student-Driven Activities in Design Research in Germany T2 - cltad’s 5th international conference Challenging the curriculum: exploring discipline boundaries in art, design and media - 12th & 13th April, 2010 Novotel Tiergarten, Berlin Y1 - 2010 CY - Berlin ER - TY - CHAP A1 - Chow, Rosan ED - Chow, Rosan ED - Sasse, Wolfgang T1 - Dewey’s Aesthetic, Logic and the Project of our Time T2 - Dock of Learning: Design von, als & jenseits von Wissen; Klel; 2014 N2 - This paper is based on the talk of the same title delivered at the “Dock of Learning” Symposium. I reflect on design research with an eye on the critical issues of our time. Design research has the potential to take on these issues; however, there are challenges. A threatening one, I see, is the divergence of design research and art research. I attempt to tackle this by examining Jonas’ Research through Design and Borgdorff’s Artistic Research with help from John Dewey’s philosophy. Y1 - 2015 UR - https://www.academia.edu/24650729/Deweys_Aesthetic_Logic_and_the_Project_of_our_Time SN - 978-3-943763-40-9 SP - 44 EP - 49 PB - Muthesius Academy of Fine Arts and Design CY - Kiel ER - TY - CHAP A1 - Chow, Rosan ED - Mareis, Claudia ED - Joost, Gesche ED - Kimpel, Kora T1 - What Should be done with the Different Versions of Research Through Design T2 - Entwerfen - Wissen - Produzieren: Designforschung im Anwendungskontext Y1 - 2014 SN - 9783839414637 U6 - https://doi.org/10.1515/transcript.9783839414637 SP - 145 EP - 158 PB - transcript Verlag ER - TY - JOUR A1 - Mennicken, Max A1 - Peter, Sophia Katharina A1 - Kaulen, Corinna A1 - Simon, Ulrich A1 - Karthäuser, Silvia T1 - Impact of device design on the electronic and optoelectronic properties of integrated Ru-terpyridine complexes JF - Beilstein journal of nanotechnology N2 - The performance of nanoelectronic and molecular electronic devices relies strongly on the employed functional units and their addressability, which is often a matter of appropriate interfaces and device design. Here, we compare two promising designs to build solid-state electronic devices utilizing the same functional unit. Optically addressable Ru-terpyridine complexes were incorporated in supramolecular wires or employed as ligands of gold nanoparticles and contacted by nanoelectrodes. The resulting small-area nanodevices were thoroughly electrically characterized as a function of temperature and light exposure. Differences in the resulting device conductance could be attributed to the device design and the respective transport mechanism, that is, thermally activated hopping conduction in the case of Ru-terpyridine wire devices or sequential tunneling in nanoparticle-based devices. Furthermore, the conductance switching of nanoparticle-based devices upon 530 nm irradiation was attributed to plasmon-induced metal-to-ligand charge transfer in the Ru-terpyridine complexes used as switching ligands. Finally, our results reveal a superior device performance of nanoparticle-based devices compared to molecular wire devices based on Ru-terpyridine complexes as functional units. KW - Ru-terpyridine wires KW - conductance switching KW - gold nanoparticles KW - nanoelectronic devices KW - optical addressing Y1 - 2022 U6 - https://doi.org/10.3762/bjnano.13.16 VL - 13 SP - 219 EP - 229 PB - Beilstein-Institut zur Förderung der Chemischen Wissenschaften ER - TY - BOOK A1 - Busen, Tobias A1 - Knechtel, Miriam A1 - Knobling, Clemens A1 - Nagel, Elke A1 - Schuller, Manfred A1 - Todt, Birte T1 - Measured building survey N2 - The precisely measured documentation of historical buildings by means of drawings – the building survey – serves several purposes: it is not only an important part of the scientific study of architecture, but also an essential basis for building measures in existing contexts. It is the only way to undertake well-founded research respectively detailed architectural planning, from structural improvement to conservation and restoration measures. In addition to a historical overview of building surveying as a method, this volume mainly offers practical assistance regarding the different methods for documenting historic buildings – starting from manual methods of measuring up to electronic and computer-aided utilities available today. The content is complemented by many illustrations and examples as well as an introduction to methods, that go beyond the mere graphic documentation and thus represent ways of conducting thorough building examinations. The book offers easy access to the topic of building surveying, both for students as well as for anyone dealing professionally with historic buildings KW - Technical University of Munich KW - historic architecture KW - building history KW - building archaeology KW - heritage conservation KW - building documentation KW - architectural drawing KW - building survey KW - measurement KW - surveying Y1 - 2022 SN - 978-3-95884-038-6 U6 - https://doi.org/10.14459/2021md1636474 PB - TUM University Press ER - TY - JOUR A1 - Richter, Stefanie T1 - Bewohner nehmen an einem Forschungsprojekt zur Verbesserung der Lebensqualität im Alter teil JF - KWA Journal Y1 - 2009 SN - 1868-5218 IS - 1 PB - KWA CY - Unterhaching ER - TY - BOOK A1 - Scheid, Sandro A1 - Vogl, Stefanie T1 - Data Science: Grundlagen, Methode und Modelle der Statistik KW - Big Data KW - Data Mining KW - Data Science Y1 - 2021 SN - 978-3-446-46663-0 SN - 978-3-446-47001-9 U6 - https://doi.org/10.3139/9783446470019 PB - Hanser ER - TY - CHAP A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Amend, Philipp A1 - Schmidt, Michael A1 - Gachot, A. T1 - Simultaneous Energy Deposition for Laser Beam Melting of Polymers T2 - Proceedings of the Polymer Processing Society 29th Annual Meeting, Nürnberg, 2013 Y1 - 2013 PB - American Institute of Physics CY - New York ER - TY - GEN A1 - Kempf, Sabrina A1 - Bieber, Claudia A1 - Corsten, Sabine A1 - Lutz-Kopp, Matthias A1 - Heim, Stefan A1 - Lauer, Norina T1 - Mitbetroffen von Aphasie: Die subjektiv empfundene Lebensqualität der Angehörigen von Menschen mit Aphasie BT - Poster T2 - Jahrestagung der Gesellschaft für Aphasieforschung und -behandlung (GAB), Tagungsband N2 - Als Systemerkrankung beeinflusst die neurologische Sprachstörung Aphasie nicht nur die Betroffenen sondern in vergleichbarem Maße auch die Angehörigen. Es zeigt sich, dass die Lebensqualität der Angehörigen beeinträchtigt ist. Ziel der qualitativen Studie ist es, die subjektive Perspektive der Angehörigen auf die eigene Situation näher zu betrachten. Y1 - 2016 U6 - https://doi.org/10.13140/RG.2.2.20665.77922 SP - 62 EP - 63 CY - Osnabrück ER - TY - CHAP A1 - Ulbrich, Alexander A1 - Galka, Stefan A1 - Günthner, Willibald A. T1 - Secure planning of order picking systems with the aid of simulation T2 - Proceedings of th 43rd Hawaii International Conference on System Sciences (HICSS), 5-8 Jan. 2010, Koloa, Kauai, Hawaii N2 - Planning a new logistics center is a quite difficult job. Depending on the requirements there are a great number of possible design versions. The planner has to consider not only the present but also the future requirements. Up to now, the planner decides on the basis of experience which system will perform the requested services best. This paper illustrates the redesign of a new order-picking system in industry supported by a simulation tool of our institute designed especially for the rough planning. With the described project the road capability of the applied simulation concept is underlined. Several versions based on the requirements were investigated and evaluated. Key figures are calculated and a recommendation depending on performance and arising expenses is given. Y1 - 2010 SN - 978-0-7695-3869-3 SN - 076953869X U6 - https://doi.org/10.1109/HICSS.2010.326 SN - 1530-1605 SP - 1 EP - 7 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Dendorfer, Sebastian A1 - Englert, Carsten T1 - Forces on a clavicles midshaft fracture and influence of fracture type T2 - AO Symposium, Regensburg, 2009 Y1 - 2009 ER - TY - CHAP A1 - Stadler, Sebastian A1 - Cornet, Henriette A1 - Mazeas, Damien A1 - Chardonnet, Jean-Remy A1 - Frenkler, Fritz T1 - IMPRO: IMMERSIVE PROTOTYPING IN VIRTUAL ENVIRONMENTS FOR INDUSTRIAL DESIGNERS T2 - Proceedings of the Design Society: DESIGN Conference 2020 N2 - Computer-Aided Design (CAD) constitutes an important tool for industrial designers. Similarly, Virtual Reality (VR) has the capability to revolutionize how designers work with its increased sense of scale and perspective. However, existing VR CAD applications are limited in terms of functionality and intuitive control. Based on a comparison of VR CAD applications, ImPro, a new application for immersive prototyping for industrial designers was developed. The user evaluations and comparisons show that ImPro offers increased usability, functionality, and suitability for industrial designers. KW - immersive prototyping KW - industrial design KW - virtual reality (VR) KW - human-computer interaction KW - computer-aided design (CAD) Y1 - 2020 U6 - https://doi.org/10.1017/dsd.2020.81 SP - 1375 EP - 1384 PB - Cambridge University Press ER - TY - CHAP A1 - Galka, Stefan A1 - Günthner, Willibald A. A1 - Ulbrich, Alexander T1 - Planning of order-picking-systems with support of discrete simulation T2 - Logistics and Supply Chain Management: Deutsch-Russische Perspektiven. Proceedings of the 5th German-Russian Logistics Workshop (DR-LOG10) Y1 - 2010 ER - TY - JOUR A1 - Galka, Stefan A1 - Klenk, Eva Marianne A1 - Günthner, Willibald A. T1 - Einfluss von Artikeleigenschaften auf die Entnahmezeit in Kommissioniersystemen JF - Logistics Journal / Proceedings N2 - Das Kommissionieren zählt zu den arbeitsintensivsten Aufgaben in der Logistik. Aus diesem Grund ist es wichtig, möglichst genau die erwarteten Prozesszeiten für diese Aufgabe zu bestimmen. Ein verbreiteter Ansatz für die Bestimmung von Prozesszeiten für manuelle Tätigkeiten beim Kommissionieren ist die Methods-Time-Measurement (MTM). Um eine Vorgabezeit mittels MTM zu bestimmen, müssen Einflussfaktoren spezifiziert werden. Dieser Beitrag zeigt anhand der Greifzeit auf, wie diese Einfluss-faktoren auf Grundlage von Artikelstammdaten bestimmt werden können. Weiterhin wird der Unterschied zwischen einer für jeden Artikel individuell bestimmten Greifzeit und der Greifzeit basierend auf repräsentativen Eigenschaften von Artikelgruppen verglichen. Wesentlich wird dabei die mittels MTM bestimmte Greifzeit durch das Gewicht und die Abmessungen (Sperrigkeit) beeinflusst. T2 - Impact of items characteristics on picking time in order picking systems systems Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-14-44540 SN - 2192-9084 PB - WGTL, Wissenschaftliche Gesellschaft für Technische Logistik e. V. CY - Stuttgart ; Dortmund ER - TY - JOUR A1 - Galka, Stefan A1 - Rammelmeier, Tobias A1 - Günthner, Willibald A. T1 - Fehlervermeidung in der kommissionierung JF - Logistics Journal N2 - Manuelle Kommissioniersysteme sind aufgrund ihrer Flexibilität weit verbreitet, jedoch treten bei diesen auch vermehrt Kommissionierfehler auf, die weitreichende Folgen haben können. Deshalb werden zu Beginn des Beitrags die Auswirkungen und Ursachen von Kommissionierfehlern betrachtet. Der Fokus des Beitrags liegt auf der Darlegung von Möglichkeiten zur Fehlervermeidung. Dabei wird ein ganzheitlicher Ansatz verfolgt, der Maßnahmen aus den Handlungsfeldern Technik, Prozess, Organisation und Motivation umfasst. Als Ausblick auf zukünftige technische Hilfsmittel zur Fehlervermeidung wird das Augmented-Reality-unterstützte System Pick-by-Vision aus der Forschung vorgestellt, das wesentliche Vorteile existierender Techniken der Informationsbereitstellung vereinigt. T2 - Error prevention in manual order picking KW - Kommissionierfehlervermeidung KW - Kommissionierung KW - Pick-by-Vision KW - augmented reality KW - order picking KW - picking error Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-14-34494 SN - 2192-9084 N1 - https://www.logistics-journal.de/proceedings/2012/3449 Jedermann darf dieses Werk unter den Bedingungen der freien Digital Peer Publishing Lizenz elektronisch über­mitteln und zum Download bereit­stellen. Der Lizenztext ist im Internet unter der Adresse http://www.dipp.nrw.de/lizenzen/dppl/fdppl/f-DPPL_v1_de_11-2004.html abrufbar. SP - 1 EP - 8 PB - WGTL, Wissenschaftliche Gesellschaft für Technische Logistik e. V. CY - Stuttgart ; Dortmund ER - TY - CHAP A1 - Jonas, Wolfgang A1 - Chow, Rosan A1 - Bredies, Katharina A1 - Vent, Kathrin ED - Durling, David ED - Chen, Lin-Lin ED - Poldma, T. ED - Roworth-Stokes, S. ED - Stolterman, E. T1 - Far Beyond Dualisms in Methodology - An Integrative Design Research Medium MAPS T2 - Design & Complexity - Proceedings of the Design Research Society Conference (DRS 2010), Montreal, 7 - 9 July, 2010 N2 - Design research is an academic issue and increasingly a success factor for industrial,organizational and social innovation. Efficient methodical support is crucial. The fiercerejection of 1st generation design methods in the early 1970s resulted in thepostmodernist attitude of "no methods", and subsequently in the strong adoption ofscientific ways of thinking for design research. The situation regarding methodologyhas been characterized by unproductive dualisms such as scientific vs. designerlymethods, normative vs. descriptive methods, research vs. design. The potential of theearly (1st generation) methods is neglected and the practical usefulness of designresearch is impeded. The suggestion for 2nd generation methods, conceived asdiscursive instruments, as discussed by Rittel and others has hardly been taken up indesign. The development of MAPS is aimed at the support of practice-oriented design,innovation and research processes. The long-term aim is the development of anintegrated knowledge and communication platform for research through design. MAPSis based upon the idea of a productive reconciliation of the strong dualisms between"scientific" and "designerly" modes of inquiry and supports the emerging concept ofdesign thinking. The paper reports on the ongoing research and development processfrom MAPS1.0 towards MAPS2.0 and beyond. KW - research through design KW - methodology KW - MAPS KW - integrative design research medium Y1 - 2010 UR - https://dl.designresearchsociety.org/conference-volumes/7/ SN - 978-2-9811985-2-5 PB - DRS Digtial Library CY - Montreal, Canada ER - TY - JOUR A1 - Brandstetter, Manuela ED - Wagner, Raphael ED - Kerzendorfer, Simone T1 - Wirkungsfeststellung in der Sozialen Arbeit BT - Erfolgsmessung oder paradoxe Effekte in einer Meta-Studie JF - Deutsches Zentralinstitut für Soziale Fragen N2 - In verschiedenen Feldern der Sozialen Arbeit in Österreich wird durch soziometrische Leistungsbeschreibungen starker Druck ausgeübt. Dieser soziale Druck wird nicht erst seit der „Global Third Way Debate“ (Giddens 1999) diskutiert und steht im Fokus dieses Beitrags. Paradoxe Effekte, welche die eigentlichen Wirkungen geleisteter Hilfen beeinträchtig sowie mögliche Exit-Strategien werden unter Bezug auf die Erkenntnisse aus zwei ideal-typischen Evaluierungsstudien dargelegt. KW - Wirkungsanalyse, Evaluation KW - qualitative Evaluationsforschung Y1 - 2018 U6 - https://doi.org/10.5771/0490-1606-2018-7-262 IS - 7 SP - 262 EP - 268 PB - Nomos elibrary CY - Berlin ER - TY - JOUR A1 - Klenk, Eva Marianne A1 - Galka, Stefan T1 - Analysis of real-time tour building and scheduling strategies for in-plant milk-run systems with volatile transportation demand JF - IFAC - PapersOnLine N2 - In modern manufacturing systems, milk run (MR) systems represent route-based, cyclic material-handling systems that are used widely and enable frequent deliveries of containerized parts in small lot sizes from a central storage area to multiple points of use on the factory floor. Usually, deliveries take place at predetermined, constant time intervals. As in real-world MR systems, the number of containers to deliver in each interval varies in the short term, peaks in the number of deliveries may lead to capacity bottlenecks and late deliveries. In this paper, we develop three alternative strategies to determine starting times of MR cycles in real-time based on the current number of delivery orders in the system aiming to better handle variations in the number of orders. We evaluate the three strategies for different system load scenarios with respect to delivery service levels, order lead times, systems utilization and necessary number of MR trains using a discrete-event simulation model. KW - Control algorithms KW - Logistics KW - Material handling KW - Milk-run systems KW - Production systems KW - Real-time decision making KW - Transportation control Y1 - 2019 U6 - https://doi.org/10.1016/j.ifacol.2019.11.517 VL - 52 IS - 13 SP - 2110 EP - 2115 PB - Elsevier ER - TY - GEN A1 - Kempf, Sabrina A1 - Bieber, Claudia A1 - Corsten, Sabine A1 - Lutz-Kopp, Matthias A1 - Heim, Stefan A1 - Lauer, Norina T1 - Mitbetroffen von Aphasie: Die subjektiv empfundene Lebensqualität der Angehörigen von Menschen mit Aphasie BT - Poster T2 - Jahrestagung des Deutschen Bundesverbands für Logopädie, Mainz Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-8661 SP - 49 ER - TY - CHAP A1 - Englert, Carsten A1 - Müller, F. A1 - Dendorfer, Sebastian T1 - Einfluss der Muskelkräfte, des Bewegungsausmaßes und der Bruchform auf die Kraftübertragung des Implantat-Knochenverbundes am Beispiel der Claviculafraktur im mittleren Drittel T2 - 17. Jahreskongress der Deutschen Vereinigung für Schulter- und Ellenbogenchirurgie (DVSE), Rosenheim 2010 N2 - Fragestellung Es soll in dieser Computersimulationsstudie untersucht werden, wie der Osteosyntheseverbund Platte mit Schrauben im Verbund mit einer im mittleren Drittel gebrochenen Clavicula durch das Bewegungsausmaß in vivo belastet ist. Was sind die grundlegenden Kräfte die auf Clavicula und Implantat wirken und welchen Einfl uss hat die Bruchform. Methodik Die Muskel- und Gelenkkräfte sowie die Belastung des Implantatverbundes wurden mit einer muskuloskelletalen Simulationssoftware (AnyBody Technology, V.4) berechnet. Hierfür wurden mit einem komplexen Model des menschlichen Körpers folgende Bewegungen analysiert: eine Flexion von 160° und Abduktion 160° mit einem Gewicht von 2 kg in der Hand. Aus CT-Patientendaten wurden zwei dreidimensionale Modelle des Clavicula-Implantat Verbundes gebildet, die sich in der Frakturform unterscheiden (Querfraktur und vertikale Fraktur). In beiden Modellen wurde eine Claviculaosteosynthese in superiorer Position mit einer 6 Loch LCP mit 2 Schrauben pro Hauptfragment verwendet. Die Materialeigenschaften wurden aus der Dichte des Materials sowie aus Literaturdaten verwendet. Die Muskel- und Gelenkkräfte aus der muskuloskelletalen Berechnung wurden auf das Finite Elemente Modell übertragen und die Spannungen und Dehnungen des Implantat-Knochenverbundes wurden berechnet. Ergebnisse Es zeigte sich, dass die simulierte in vivo Belastung stark abhängig vom Flexionswinkel ist. Das Implantat ist in der superioren Lage auf Biegung belastet, welche maximale Werte im Überschulterniveau erreicht. Die Bruchform mit anatomischer Reposition und Kontakt der Hauptfragmente zueinander führt zu einer deutlichen Entlastung des Osteosyntheseverbundes im Vergleich zu einer Bruchform mit vertikaler Fraktur. Schlussfolgerung Aus den Analysen ist eine Positionierung der Plattenosteosynthese für die im mittleren Drittel frakturierte Clavicula in anterior-superiorer Lage wünschenswert. Die anatomische Reposition entlastet den Osteosyntheseverbund und sollte möglichst erreicht werden. Die Nachbehandlung sollte ein Bewegungsausmaß für den Arm für 4 Wochen für einfache Bruchformen auf 70° Flexion und Abduktion limitieren und für komplexe Bruchformen diese Limitierung ausgedehnt werden. Y1 - 2010 ER - TY - CHAP A1 - Börsch-Supan, Axel A1 - Düzgün, Ismail A1 - Weiss, Matthias ED - Broeders, Dirk ED - Eijffinger, Sylvester C.W. ED - Houben, Aerdt T1 - Labor Productivity in an Aging Society T2 - Frontiers in Pension Finance N2 - How to deliver adequate pension benefits at reasonable costs is a huge challenge confronting our ageing societies. This book delivers a comprehensive overview of the latest insights into pension finance, pension system design, pension governance and risk based supervision. It combines state-of-the-art analyses with innovative policy proposals to increase the efficiency and resilience of pension systems and to advance these systems’ contribution to global financial stability. Renowned pension experts offer cutting-edge guidance for future decision making and the development of best practices. This exciting exploration of the frontiers in pension finance highlights key aspects of securing long term retirement provisions. Y1 - 2008 U6 - https://doi.org/10.4337/9781847209924.00013 SP - 83 EP - 98 PB - Edward Elgar CY - Cheltenham ER - TY - BOOK A1 - Lieb, Christian A1 - Klenk, Eva Marianne A1 - Galka, Stefan A1 - Keuntje, Christopher T1 - Einsatz von Routenzugsystemen zur Produktionsversorgung : Studie zu Planung Steuerung und Betrieb KW - Effizienz KW - Produktion KW - Routenzug Y1 - 2017 SN - 978-3-941702-79-0 PB - fml - Lehrstuhl für Fördertechnik Materialfluß Logistik Technische Universität München CY - Garching b. München ER - TY - JOUR A1 - Galka, Stefan T1 - Operating strategies for in-plant milk-run systems JF - IFAC-Papers OnLine N2 - In-plant milk-run systems are transportation systems, where materials are delivered from a central storage area to several points of use on defined routes and in short intervals. Milk-run systems generally enable frequent deliveries in smaller lot sizes with short lead times and low inventory at the points of use. In real milk-run systems, the number of deliveries per interval varies due to, e.g., variations in the production program. To enable efficient and stable milk-run system operations, these systems therefore must be able to cope with peaks in the number of deliveries. We develop different strategies for handling these delivery peaks and evaluate them with respect to delivery cost, lead time and service level using real material consumption data from two large companies from the automotive industry. KW - Automobile industry KW - Control algorithms KW - Lean manufacturing KW - Logistics KW - Mulk-run systems KW - Production systems KW - Transportation control Y1 - 2015 U6 - https://doi.org/10.1016/j.ifacol.2015.06.361 VL - 48 IS - 3 SP - 1882 EP - 1887 PB - Elsevier CY - Frankfurt ER - TY - CHAP A1 - Galka, Stefan A1 - Klenk, Eva Marianne A1 - Günthner, Willibald A. T1 - Planning of production supermarkets for production supply T2 - Proceedings of 2013 IEEE International Conference on Service Operations and Logistics, and Informatics, 28-30 July 2013, Dongguan, China N2 - Production supermarkets are a system to ensure high-frequency, demand-oriented, in-plant production supply with low lot sizes. The paper presents methods to design and dimension these systems using qualitative design criteria and quantitative approaches based on well-known analytical methods for conventional order picking systems. The methods help to design layout, provision type and path strategy and to derive space consumption and the number of supermarket employees required to fulfill a defined demand. Y1 - 2013 SN - 978-1-4799-0530-0 U6 - https://doi.org/10.1109/SOLI.2013.6611458 SP - 456 EP - 461 PB - IEEE CY - Piscataway, NJ ER - TY - JOUR A1 - Galka, Stefan A1 - Klenk, Eva Marianne A1 - Günthner, Willibald A. T1 - Potenziale einer flexiblen Routenzugsteuerung: Strategien zum besseren Umgang mit schwankenden Transportbedarfen JF - Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb : ZWF T2 - Potentials of a in-plant milk run control Y1 - 2015 U6 - https://doi.org/10.3139/104.111444 SN - 2511-0896 SN - 0947-0085 VL - 110 IS - 12 SP - 805 EP - 809 PB - de Gruyter CY - Berlin ER - TY - CHAP A1 - Galka, Stefan ED - Britzke, Bernd T1 - Planung und Auswahl von Kommissioniersystemen T2 - MTM in einer globalisierten Wirtschaft : Arbeitsprozesse systematisch gestalten und optimieren Y1 - 2010 SN - 978-3-86880-091-3 SN - 978-3-86416-195-7 SP - 201 EP - 220 PB - mi-Wirtschaftsbuch Finanzbuch-Verl. CY - München ER - TY - JOUR A1 - Sokolowski-Tinten, Klaus A1 - Blome, Christian A1 - Blums, Juris A1 - Dietrich, Clemens A1 - Tarsevitch, Alexander A1 - Horn-von Hoegen, Michael A1 - von der Linde, Dietrich A1 - Cavalleri, Andrea A1 - Kammler, Martin A1 - Uschmann, Ingo A1 - Foerster, Eckhart T1 - Femtosecond X-ray Diffraction Study of Large Amplitude Coherent Optical Phonons in Laser-Excited Bismuth JF - Conference on Lasers and Electro-Optics, 1–6 June 2003, Baltimore, Maryland N2 - Femtosecond time-resolved X-ray diffraction was used to directly study optical phonons in laser-excited Bismuth. A periodic modulation of the diffraction efficiency reveals initially coherent lattice distortions with atomic displacements of nearly 10% of the nearest- neighbor-distance. Y1 - 2003 UR - https://opg.optica.org/abstract.cfm?uri=cleo-2003-CMZ6 PB - Optical Society of America ER - TY - JOUR A1 - Wall, Simone A1 - Krenzer, Boris A1 - Wippermann, Stefan A1 - Sanna, Simone A1 - Klasing, Friedrich A1 - Hanisch-Blicharski, Anja A1 - Kammler, Martin A1 - Schmidt, Wolf Gero A1 - Horn-von Hoegen, Michael T1 - Atomistic picture of charge density wave formation at surfaces JF - Physical review letters N2 - We used ultrafast electron diffraction and density-functional theory calculations to gain insight into the charge density wave (CDW) formation on In/Si(111). Weak excitation by a femtosecond-laser pulse results in the melting of the CDW. The immediate freezing is hindered by a barrier for the motion of atoms during the phase transition: The melted CDW constitutes a long-lived, supercooled phase and is strong evidence for a first-order transition. The freezing into the CDW is triggered by preexisting adsorbates. Starting at these condensation nuclei, the CDW expands one dimensionally on the In/Si(111) surface, with a constant velocity of more than 80 m/s. Y1 - 2012 U6 - https://doi.org/10.1103/PhysRevLett.109.186101 VL - 109 IS - 18 PB - APS ER - TY - JOUR A1 - Möllenbeck, Simone A1 - Hanisch-Blicharski, Anja A1 - Schneider, Paul A1 - Ligges, Manuel A1 - Zhou, Ping A1 - Kammler, Martin A1 - Krenzer, Boris A1 - Horn-von Hoegen, Michael T1 - Ultra-fast Time-Resolved Electron Diffraction of Strongly Driven Phase Transitions on Silicon Surfaces JF - MRS Online Proceedings Library N2 - The dynamics of strongly driven phase transitions at surfaces are studied by ultra-fast time-resolved reflection high energy electron diffraction. The surfaces are excited by an intense fs-laser pulse (pump) and probed by an ultra-short electron pulse with variable time delay. The order-disorder phase transition from a c(4 × 2) to a(2 × 1) of the bare Si(001) surface shows a transient decrease of the intensity of the c(4 × 2) spots which recovers on a time scale of a few hundred picoseconds indicating the excitation of the phase transition. On Si(111) a monolayer of Indium induces a (4 × 1) reconstruction which undergoes a Peierls like phase transition to a (8 × "2") reconstruction below 100 K. Upon laser excitation with a fluence of 3.4 mJ/cm 2 at a temperature of 72 K the phase transition was strongly driven. The (8 × "2")-diffraction spots instantaneously disappears, while the intensity of the (4 × 1)-spots increases. This increase of the (4 × 1) spot intensity excludes an explanation by the Debye-Waller-Effect and is evidence for a true structural phase transition at a surface. © 2010 Materials Research Society. Y1 - 2009 U6 - https://doi.org/10.1557/PROC-1230-MM03-09 PB - Springer ER - TY - JOUR A1 - Lu, Wei A1 - Nicoul, Matthieu A1 - Shymanovich, Uladzimir A1 - Tarsevitch, Alexander A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael A1 - von der Linde, Dietrich A1 - Sokolowski-Tinten, Klaus T1 - Extreme Phonon Softening in Laser-excited Bismuth - Towards an Inverse Peierls-transition JF - MRS Online Proceedings Library N2 - Large amplitude coherent optical phonons have been investigated in laser-excited Bismuth by means of femtosecond time-resolved X-ray diffraction. For absorbed laser fluences above 2 mJ/cm2, the experimental data reveal an extreme softening of the excited A1g-mode down to frequencies of about 1 THz, only 1/3 of the unperturbed A1g-frequency. At even stronger excitation the measured diffraction signals no longer exhibit an oscillatory behavior presenting strong indication that upon intense laser-excitation the Peierls-distortion, which defines the equilibrium structure of Bismuth, can be transiently reversed. Y1 - 2009 U6 - https://doi.org/10.1557/PROC-1230-MM03-05 VL - 1230 PB - Springer ER - TY - JOUR A1 - Hanisch-Blicharski, Anja A1 - Krenzer, Boris A1 - Möllenbeck, Simone A1 - Ligges, Manuel A1 - Zhou, Ping A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael T1 - Transient Cooling of Ultrathin Epitaxial Bi(111)-Films on Si(111) Upon Femtosecond Laser Excitation Studied by Ultrafast Reflection High Energy Electron Diffraction JF - MRS Online Proceedings Library N2 - With time resolved ultrafast electron diffraction the cooling process across the interface between a thin film and the underlying substrate was studied after excitation with short laser pulses. From the exponential decay of the surface temperature evolution a thermal boundary conductance of 1430 W/(cm2K) is determined for a 9.7 nm thin Bi(111) film on Si(111). A linear dependence between laser fluence and initial temperature rise was measured for film-thicknesses between 2.5 nm and 34.5 nm. The ratio of initial temperature rise and laser fluence for different film-thicknesses is compared to a model taking multilayer optics into account. The data agree well with this model. Y1 - 2009 U6 - https://doi.org/10.1557/PROC-1172-T04-08 SP - 1 EP - 6 PB - Springer ER - TY - JOUR A1 - Al-Falou, A. A. A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael T1 - Strain state analysis of hetero-epitaxial systems JF - Europhysics Letters N2 - We present a new method to analyze the strain state of epitaxial hetero structures by high-resolution spot profile analysis low-energy electron diffraction. From the variation of the spot profiles with the vertical scattering vector we determine the hetero film roughness, the change of interlayer spacing due to tetragonal distortion, and the variation of the interlayer distance due to partial relaxation of the strained rough film. The practical implementation of this method is simple and can be used to determine the onset of strain-relieving defects during the growth process. Y1 - 2005 U6 - https://doi.org/10.1209/epl/i2004-10399-6 VL - 69 IS - 4 SP - 570 EP - 576 PB - IOP ER - TY - JOUR A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael T1 - Low energy electron diffraction of epitaxial growth of bismuth on Si(111) JF - Surface Science N2 - The epitaxial growth of Bi on Si(1 1 1) studied by spot profile analyzing low energy electron diffraction shows for low coverage rotationally disordered Bi cluster with preferred orientations following the threefold symmetry of the Si substrate. With further deposition the Bi cluster coalesces and the surface orientation changes from the pseudo cubic Bi(1 1 0) surface orientation of the Bi cluster into the hexagonal Bi(1 1 1) surface of the resulting Bi film. KW - Bismuth KW - Epitaxial growth KW - LEED KW - low energy electron diffraction KW - Silicon KW - Structural transition Y1 - 2005 U6 - https://doi.org/10.1016/j.susc.2004.11.033 VL - 576 IS - 1-3 SP - 56 EP - 60 PB - Elsevier ER - TY - CHAP A1 - Siders, C. W. A1 - Cavalleri, Andrea A1 - Tóth, Csaba A1 - Wilson, K. R. A1 - Squier, Jeff A. A1 - Barty, C. P. J. A1 - Kammler, Martin A1 - Sokolowski-Tinten, Klaus A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. T1 - Femtosecond X-ray diffraction of short-pulse irradiated semiconductors T2 - Summaries of Papers Presented at the Lasers and Electro-Optics. CLEO '02. Technical Diges, 24-24 May 2002, Long Beach, CA, USA N2 - Summary form only given, as follow. Ultrafast optical-pump, X-ray diffraction probe experiments are providing new ways to study transient processes including the direct observation of the atomic motion by which many solid-state processes and chemical and biochemical reactions take place. Current table-top-terawatt femtosecond laser systems provide an attractive source of few-hundred femtosecond duration bursts of angstrom-scale X-ray radiation with fluxes comparable to standard rotating anode sources. Their compact size enables time resolved structural dynamics to be studied in the small laboratory with temporal resolution better than typical molecular vibrational periods. Ultrafast structural dynamics in crystalline samples are readily studied with such systems and experiments to be discussed in this talk include ultrafast non-thermal solid-to-liquid transition in thin single-crystal Ge-111 films grown on Si-111 substrates; ultrafast non-thermal solid-to-solid transitions in bulk vanadium dioxide from a low temperature insulating phase to a high temperature metallic phase; and harmonic and anharmonic coherent acoustic dynamics in layered Ge-111/Si-111 and bulk GaAs-111 samples. Future improvements in high-average power short-pulse lasers will enable the study of a wider class of materials such as amorphous solids or liquid-phase dynamics of simple molecules, while proposed 4th generation light sources based upon single-pass X-ray free-electron lasers will permit singleshot structural determination of complex biomolecules. KW - high-speed techniques KW - X-ray diffraction KW - laser beam effects KW - semiconductor materials KW - solid-liquid transformations KW - solid-state phase transformations KW - metal-insulator transition Y1 - 2002 U6 - https://doi.org/10.1109/CLEO.2002.1033997 SP - 297 EP - 298 PB - IEEE ER - TY - JOUR A1 - Sokolowski-Tinten, Klaus A1 - Blome, Christian A1 - Blums, Juris A1 - Cavalleri, Andrea A1 - Dietrich, Clemens A1 - Tarasevitch, Alexander A1 - Uschmann, Ingo A1 - Förster, Eckhard A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael A1 - von der Linde, Dietrich T1 - Femtosecond X-ray measurement of coherent lattice vibrations near the Lindemann stability limit JF - Nature N2 - The study of phase-transition dynamics in solids beyond a time-averaged kinetic description requires direct measurement of the changes in the atomic configuration along the physical pathways leading to the new phase. The timescale of interest is in the range 10(-14) to 10(-12) s. Until recently, only optical techniques were capable of providing adequate time resolution, albeit with indirect sensitivity to structural arrangement. Ultrafast laser-induced changes of long-range order have recently been directly established for some materials using time-resolved X-ray diffraction. However, the measurement of the atomic displacements within the unit cell, as well as their relationship with the stability limit of a structural phase, has to date remained obscure. Here we report time-resolved X-ray diffraction measurements of the coherent atomic displacement of the lattice atoms in photoexcited bismuth close to a phase transition. Excitation of large-amplitude coherent optical phonons gives rise to a periodic modulation of the X-ray diffraction efficiency. Stronger excitation corresponding to atomic displacements exceeding 10 per cent of the nearest-neighbour distance-near the Lindemann limit-leads to a subsequent loss of long-range order, which is most probably due to melting of the material. Y1 - 2003 U6 - https://doi.org/10.1038/nature01490 VL - 422 IS - 6929 SP - 287 EP - 289 PB - Springer ER - TY - JOUR A1 - Hild, R. A1 - Seifert, C. A1 - Kammler, Martin A1 - Meyer zu Heringdorf, Frank-Joachim A1 - Horn-von Hoegen, Michael A1 - Zhachuk, R.A A1 - Olshanetsky, B.Z T1 - Kinetics of Au induced faceting of vicinal Si(111) JF - Surface Science N2 - Au induced faceting of vicinal Si(1 1 1) has been studied during adsorption at elevated temperature by spot profile analyzing of low energy electron diffraction and after quenching to room temperature by scanning tunneling microscopy. On the surfaces inclined towards five different types of facets form with increasing Au coverage at adsorption temperatures Tads below 800 °C. They are (4 4 3), (7 7 5), (5 5 3), a stepped (2 2 1), and the (3 3 1) facets. Atomic models for the (5 5 3) and (7 7 5) facet planes are proposed on the basis of high resolution STM images. At C we found the formation of an ordered step train which covers the entire surface. With further increasing Au coverage the stepped surface decomposes again into (1 1 1) terraces and step bunches. Driving force is the formation of the Si(1 1 1)-(5×2)–Au reconstruction. KW - Low energy electron diffraction (LEED) KW - Scanning tunneling microscopy KW - Silicon KW - Gold KW - Faceting KW - Adsorption kinetics KW - Step formation and bunching Y1 - 2002 U6 - https://doi.org/10.1016/S0039-6028(02)01666-7 VL - 512 IS - 1-2 SP - 117 EP - 127 PB - Elsevier ER - TY - JOUR A1 - Sokolowski-Tinten, Klaus A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. A1 - Cavalleri, Andrea A1 - Siders, C. W. A1 - Brown, F. L. H. A1 - Leitner, D. M. A1 - Tóth, Csaba A1 - Squier, Jeff A. A1 - Barty, C. P. J. A1 - Wilson, K. R. A1 - Kammler, Martin T1 - Transient lattice dynamics in fs-laser-excited semiconductors probed by ultrafast X-ray diffraction JF - Journal de Physique IV N2 - A study of lattice dynamics in fs-laser-excited crystalline bulk Ge and Ge/Si-heterostructures, using time-resolved x-ray diffraction, was presented. Fast energy transport deep into the bulk of the material, coherent acoustic phonon dynamics, lattice anharmonicity, and vibrational transport across a buried interfaces were observed. Graphs showing time-dependent shifts of the centroid of the measured rocking curves in the Ge-overlayer and in the Si-substrate for different fluences, were presented. Y1 - 2001 U6 - https://doi.org/10.1051/jp4:2001290 VL - 11 IS - Pr2 SP - 473 EP - 477 PB - EDP ER - TY - JOUR A1 - Sokolowski-Tinten, Klaus A1 - Cavalleri, Andrea A1 - Siders, C. W. A1 - Brown, F. L. H. A1 - Leitner, D. M. A1 - Tóth, Csaba A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. A1 - Squier, Jeff A. A1 - Barty, C. P. J. A1 - Wilson, K. R. T1 - Time-resolved x-ray diffraction study of ultrafast acoustic phonon dynamics in Ge/Si-heterostructures JF - Chemical Physics N2 - Using time-resolved x-ray diffraction the ultafast strain dynamics in fs-laserexcited Ge/Si-heterostructures has been studied. A fluence dependent, anharmonic damping of the impulsively generated acoustic phonons and vibrational transport across the buried Ge/Si-interface are observed. Y1 - 2001 U6 - https://doi.org/10.1007/978-3-642-56546-5_81 VL - 66 SP - 281 EP - 283 PB - Springer ER - TY - CHAP A1 - Sokolowski-Tinten, Klaus A1 - Blome, Christian A1 - Dietrich, Clemens A1 - Blums, Juris A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. A1 - Cavalleri, Andrea A1 - Squier, Jeff A. A1 - Kammler, Martin T1 - Structural dynamics in laser-excited solids investigated with femtosecond x-ray diffraction T2 - 2002 Summaries of Papers Presented at the Quantum Electronics and Laser Science Conference, 19-24 May 2002, Long Beach, CA, USA N2 - Summary form only given. Ultrashort x-ray pulses offer a unique combination of atomic-scale spatial and temporal resolution, which permits direct measurements of structural transients on an ultrafast time scale. Using time-resolved X-ray diffraction with femtosecond, multi-keV X-ray pulses we have studied transient lattice dynamics in optically excited semiconductors. Y1 - 2002 U6 - https://doi.org/10.1109/QELS.2002.1031182 SP - 115 EP - 116 PB - IEEE ER - TY - JOUR A1 - Sokolowski-Tinten, Klaus A1 - Blome, Christian A1 - Dietrich, Clemens A1 - Tarasevitch, A. A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. A1 - Cavalleri, Andrea A1 - Squier, Jeff A. A1 - Kammler, Martin T1 - Femtosecond x-ray measurement of ultrafast melting and large acoustic transients JF - Physical review letters N2 - Time-resolved x-ray diffraction with ultrashort ( approximately 300 fs), multi-keV x-ray pulses has been used to study the femtosecond laser-induced solid-to-liquid phase transition in a thin crystalline layer of germanium. Nonthermal melting is observed to take place within 300-500 fs. Following ultrafast melting we observe strong acoustic perturbations evolving on a picosecond time scale. Y1 - 2001 U6 - https://doi.org/10.1103/PhysRevLett.87.225701 VL - 87 PB - APS ER - TY - JOUR A1 - Sokolowski-Tinten, Klaus A1 - Blome, Christian A1 - Dietrich, Clemens A1 - Tarasevitch, A. A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. A1 - Cavalleri, Andrea A1 - Squier, Jeff A. A1 - Kammler, Martin T1 - Femtosecond time-resolved X-ray diffraction study of ultrafast structural dynamics in laser-excited solids JF - International Conference on Ultrafast Phenomena, 12 May 2002, Vancouver Canada N2 - Time-resolved x-ray diffraction with sub-300 fs, multi-keV x-ray pulses was used to study ultrafast lattice dynamics in laser-irradiated germanium and bismuth. In bismuth strong excitation of optical phonons is observed prior to disordering of the material. Y1 - 2002 U6 - https://doi.org/10.1007/978-3-642-59319-2_10 VL - 71 SP - 36 EP - 38 PB - Optica Publishing Grou ER - TY - INPR A1 - Tringides, Michael C. A1 - Conrad, E. H. A1 - Menzel, Andreas A1 - Voss, Neil R. A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael T1 - Dynamics of atomic steps on Si(001) studied by temporal LEED spectroscopy [Poster] N2 - While surface kinetics measurements for single atom diffusion have proliferated, little work exists attempting to measure surface dynamics under equilibrium conditions. We will present our recent work on developing Temporal LEED Spectroscopy (TLS) as a dynamic probe of surfaces capable of kinetics measurements at both high temperatures and surface coverages. By tuning the diffraction to specific structural entities such as steps, islands, etc., and monitoring the diffracted signal as a function of time, dynamics information about these structures can be obtained. As an example we will present TLS results for the dynamics of step fluctuations on Si(001) [1]. We have measured activation energies and identified step-edge diffusion as the rate limiting process for 950K < T < 1130K. Although this result is in apparent disagreement with earlier work, a careful analysis, considering crossover temperatures between different microscopic processes, can reconcile the differences. 1. M. Kammler, et al., Phys. Rev. B (in press). Y1 - 2002 UR - https://www.researchgate.net/publication/252546721_Dynamics_of_atomic_steps_on_Si001_studied_by_temporal_LEED_spectroscopy_poster ER - TY - JOUR A1 - Horn-von Hoegen, Michael A1 - Meyer zu Heringdorf, Frank-Joachim A1 - Kammler, Martin A1 - Schaeffer, C. A1 - Reinking, D. A1 - Hofmann, K. R. T1 - Bi surfactant mediated epitaxy of Ge on Si(111) JF - Thin Solid Films N2 - We have tested Bi for the surfactant mediated epitaxy of Ge on Si(111). Islanding of Ge is prevented and a 2D layer growth of smooth and continuous Ge films is observed. The lattice mismatch is accommodated by a periodic array of dislocations confined to the Si/Ge interface. The large covalent radius of Bi reduces the binding energy, allowing Very efficient segregation and low doping levels even at low growth temperatures. Unfortunately, this results also in a high Bi desorption flux limiting the possible growth temperatures below 600 degrees C. Consequently the Ge films show a high defect density in the order of 10(8) cm(-2) for stacking faults and 10(9) cm(-2) for dislocations which limit electron Hall mobility to values below 700 cm(2)/V s at room temperature. KW - Hall mobility KW - Heteroepitaxial growth KW - Surfactants KW - Doping KW - Molecular beam epitaxy KW - Silicon KW - Germanium KW - Bismuth KW - Low energy electron diffraction KW - Scanning electron microscopy Y1 - 1999 U6 - https://doi.org/10.1016/S0040-6090(98)01659-9 VL - 343-344 SP - 579 EP - 582 PB - Elsevier ER - TY - JOUR A1 - Cavalleri, Andrea A1 - Siders, C. W. A1 - Brown, F. L. H. A1 - Leitner, D. M. A1 - Tóth, Csaba A1 - Squier, Jeff A. A1 - Barty, C. P. J. A1 - Wilson, K. R. A1 - Sokolowski-Tinten, Klaus A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. A1 - Kammler, Martin T1 - Anharmonic lattice dynamics in germanium measured with ultrafast x-ray diffraction JF - Physical review letters N2 - Damping of impulsively generated coherent acoustic oscillations in a femtosecond laser-heated thin germanium film is measured as a function of fluence by means of ultrafast x-ray diffraction. By simultaneously measuring picosecond strain dynamics in the film and in the unexcited silicon substrate, we separate anharmonic damping from acoustic transmission through the buried interface. The measured damping rate and its dependence on the calculated temperature of the thermal bath is consistent with estimated four-body, elastic dephasing times (T2) for 7-GHz longitudinal acoustic phonons in germanium. Y1 - 2000 U6 - https://doi.org/10.1103/PhysRevLett.85.586 VL - 85 IS - 3 SP - 586 EP - 589 PB - APS ER - TY - JOUR A1 - Sokolowski-Tinten, Klaus A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. A1 - Cavalleri, Andrea A1 - Siders, C. W. A1 - Brown, F. L. H. A1 - Tóth, Csaba A1 - Squier, Jeff A. A1 - Barty, C. P. J. A1 - Wilson, K. R. A1 - Kammler, Martin T1 - Time-resolved x-ray diffraction study of ultrafast acoustic phonon dynamics in Ge/Si-heterostructures JF - International Conference on Ultrafast Phenomena , 9 July 2000, Charleston N2 - Using time-resolved x-ray diffraction the ultafast strain dynamics in fs-laserexcited Ge/Si-heterostructures has been studied. A fluence dependent, anharmonic damping of the impulsively generated acoustic phonons and vibrational transport across the buried Ge/Si-interface are observed. KW - Acoustic Phonon KW - Acoustic Transmission KW - Carrier Diffusion KW - Homogenous Expansion KW - Lattice Anharmonicity Y1 - 2000 UR - https://opg.optica.org/abstract.cfm?uri=UP-2000-MF43 PB - Optica ER - TY - JOUR A1 - Siders, C. W. A1 - Cavalleri, Andrea A1 - Sokolowski-Tinten, Klaus A1 - Tóth, Csaba A1 - Guo, T. A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael A1 - Wilson, K. R. A1 - von der Linde, D. A1 - Barty, C. P. J. T1 - Detection of nonthermal melting by ultrafast X-ray diffraction JF - Science N2 - Using ultrafast, time-resolved, 1.54 angstrom x-ray diffraction, thermal and ultrafast nonthermal melting of germanium, involving passage through nonequilibrium extreme states of matter, was observed. Such ultrafast, optical-pump, x-ray diffraction probe measurements provide a way to study many other transient processes in physics, chemistry, and biology, including direct observation of the atomic motion by which many solid-state processes and chemical and biochemical reactions take place. Y1 - 1999 U6 - https://doi.org/10.1126/science.286.5443.1340 VL - 286 IS - 5443 SP - 1340 EP - 1342 ER - TY - JOUR A1 - Reinking, D. A1 - Kammler, Martin A1 - Hoffmann, N. A1 - Horn-von Hoegen, Michael A1 - Hofmann, K. R. T1 - Fabrication of high-mobility Ge p-channel MOSFETs on Si substrates JF - Electronics Letters N2 - The first fabrication of Ge p-channel MOSFETs (p-MOSFETs) on Si substrates is reported. A CMOS compatible process based on relaxed Ge layers grown on Si(111) substrates by surfactant mediated epitaxy (SME) was used. The non-optimised low temperature process yielded normally-off Ge p-MOSFETs with record channel drift mobilities of 430 cm2/Vs KW - silicon KW - CMOS integrated circuits KW - germanium KW - carrier mobility KW - epitaxial growth KW - integrated circuit technology KW - elemental semiconductors KW - semiconductor growth KW - MOSFET KW - Insulated gate field effect transistors KW - Thin film growth and epitaxy Y1 - 1999 U6 - https://doi.org/10.1049/el:19990349 VL - 35 IS - 6 SP - 503 EP - 504 PB - IET ER - TY - JOUR A1 - Siders, C. W. A1 - Cavalleri, Andrea A1 - Sokolowski-Tinten, Klaus A1 - Tóth, Csaba A1 - Guo, T. A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael A1 - Wilson, K. R. A1 - von der Linde, D. A1 - Barty, C. P. J. T1 - Direct Observation of Ultrafast Non-thermal Melting by Ultrafast X-ray Diffraction JF - Ultrafast Phenomena XII N2 - Ultrafast nonthermal melting of femtosecond laser-irradiated germanium was observed directly for the first time using sub-picosecond, 1.54-angstrom x-ray diffraction. Such measurements allow the study of transient atomic motion fundamental to many processes in physics, chemistry, and biology. Y1 - 2000 U6 - https://doi.org/10.1007/978-3-642-56546-5_80 VL - 66 SP - 276 EP - 280 PB - Springer ER - TY - CHAP A1 - Schliermann, Rainer A1 - Heydenreich, Patrick A1 - Scheuer, Tanja A1 - Anneken, Volker T1 - Lebensqualität, Erwerbstätigkeit und körperliche Aktivität bei Menschen mit Sehschädigungen: Eine Befragung ehemaliger Rehabilitanden von Berufsförderungs- und Berufsbildungswerken T2 - 23. Rehabilitationswissenschaftliches Kolloquium - Deutscher Kongress für Rehabilitationsforschung: Arbeit - Gesundheit - Rehabilitation vom 10. bis 12. März 2014 in Karlsruhe Y1 - 2014 UR - https://www.deutsche-rentenversicherung.de/SharedDocs/Downloads/DE/Experten/reha_forschung/reha_kolloquium/TB-23Reha-Koll.html SN - 978–3–00–045196–6 SP - 106 EP - 108 CY - Berlin ER - TY - CHAP A1 - Sokolowski-Tinten, Klaus A1 - von der Linde, D. A1 - Siders, C. W. A1 - Cavalleri, Andrea A1 - Tóth, Csaba A1 - Guo, T. A1 - Wilson, K. R. A1 - Barty, C. P. J. A1 - Kammler, Martin A1 - Horn-von Hoegen, Michael T1 - Lattice dynamics of femtosecond laser-excited semiconductors probed by ultrafast x-ray diffraction T2 - Applications of High Field and Short Wavelength Sources VIII N2 - The present knowledge of the atomic structure of matter is to a large extent due to x-ray spectroscopies. Y1 - 1999 U6 - https://doi.org/10.1364/HFSW.1999.PD3 PB - Optica ER - TY - GEN A1 - Schliermann, Rainer A1 - Scheuer, Tanja A1 - Heydenreich, Patrick A1 - Anneken, Volker ED - Stoll, Oliver ED - Lau, Andreas ED - Moczall, Simone T1 - Sport und Lebensqualität von Personen mit Sehschädigungen T2 - Angewandte Sportpsychologie : 45. Jahrestagung der Arbeitsgemeinschaft für Sportpsychologie (asp) vom 09. - 11. Mai 2013 in Halle (Saale) Y1 - 2013 SN - 978-3-88020-597-0 SP - 91 PB - Feldhaus, Ed. Czwalina CY - Hamburg ER - TY - GEN A1 - Schliermann, Rainer A1 - Heydenreich, Patrick A1 - Bungter, Tanja A1 - Anneken, Volker T1 - Physical Activity and Quality of Life in People with Visual Impairments T2 - Journal of Rehabilitation Medicine / Supplement Y1 - 2015 SN - 1650-1969 IS - Supplement 54 SP - 26 EP - 26 PB - Taylor & Francis CY - Stockholm ER - TY - JOUR A1 - Cerrone, Albert R. A1 - Wawrzynek, Paul A1 - Nonn, Aida A1 - Paulino, Glaucio H. A1 - Ingraffea, Anthony R. T1 - Implementation and verification of the Park–Paulino–Roesler cohesive zone model in 3D JF - Engineering Fracture Mechanics N2 - The Park–Paulino–Roesler (PPR) potential-based model is a cohesive constitutive model formulated to be consistent under a high degree of mode-mixity. Herein, the PPR’s generalization to three-dimensions is detailed, its implementation in a finite element framework is discussed, and its use in single-core and high performance computing (HPC) applications is demonstrated. The PPR model is shown to be an effective constitutive model to account for crack nucleation and propagation in a variety of applications including adhesives, composites, linepipe steel, and microstructures. KW - Cohesive zone modeling KW - Cohesive element KW - Intergranular fracture KW - Finite element analysis KW - PPR potential-based model Y1 - 2014 U6 - https://doi.org/10.1016/j.engfracmech.2014.03.010 VL - 120 SP - 26 EP - 42 ER - TY - JOUR A1 - Schmidt, Thomas A1 - Kröger, Roland A1 - Flege, Jan Ingo A1 - Horn-von Hoegen, Michael A1 - Clausen, T. A1 - Falta, J. A1 - Janzen, Andreas A1 - Zahl, P. A1 - Kury, P. A1 - Kammler, Martin T1 - Less strain energy despite fewer misfit dislocations: the impact of ordering JF - Physical review letters N2 - The average strain state of Ge films grown on Si(111) by surfactant mediated epitaxy has been compared to the ordering of the interfacial misfit dislocation network. Surprisingly, a smaller degree of average lattice relaxation was found in films grown at higher temperature. On the other hand, these films exhibit a better ordered dislocation network. This effect energetically compensates the higher strain at higher growth temperature, leading to the conclusion that, apart from the formation of misfit dislocations, their ordering represents an important channel for lattice-strain energy relaxation. Y1 - 2006 U6 - https://doi.org/10.1103/PhysRevLett.96.066101 VL - 96 IS - 6 PB - APS ER - TY - CHAP A1 - Bäuml, T. A1 - Haumer, Anton A1 - Kapeller, Hansjörg A1 - Starzinger, J. A1 - Farzi, P. T1 - Impact of inverter pulse inhibition on the high-voltage supply system of an electric vehicle — A simulative approach T2 - 2011 IEEE Vehicle Power and Propulsion Conference (VPPC 2011) : Powering sustainable transportation ; Chicago, Illinois, USA, 06. - 09.09.2011 N2 - This paper deals with a simulative approach for investigating the impact of inverter pulse inhibition during field weakening operation of permanent magnet synchronous machines and asynchronous induction machines. The modelling and simulation language Modelica is used to design models for the vehicle, the electric machine and the inverter in different abstraction levels. It is shown that when using a permanent magnet synchronous machine, a sudden breakdown of the field weakening current causes induction of high voltages in the stator windings. Hence, the electric system of the vehicle has to be protected against the resulting high currents. Furthermore precautions have to be taken to avoid dangerous driving conditions because of high braking torques in an inverter fault operation mode. In the case of the asynchronous induction machine an inverter pulse inhibition poses no big problem, neither for the electric system of the vehicle, nor the driver. KW - asynchronous machines KW - Connectors KW - electric vehicles KW - Inverters KW - invertors KW - Mathematical model KW - Object oriented modeling KW - permanent magnet machines KW - power engineering computing KW - Rotors KW - synchronous machines KW - Torque KW - Vehicles Y1 - 2011 SN - 978-1-61284-248-6 SN - 978-1-61284-247-9 SN - 978-1-61284-246-2 U6 - https://doi.org/10.1109/VPPC.2011.6043159 SP - 1 EP - 5 PB - IEEE CY - Piscataway, NJ ER -