TY - JOUR A1 - Heese, Carl A1 - Wiederer, Ralf T1 - Neue Rollenverteilung in der Arztassistenz JF - Führen und Wirtschaften im Krankenhaus: F & W KW - Krankenhausmanagement Y1 - 2007 VL - 24 IS - 5 SP - 500 EP - 502 PB - Bibliomed-Medizinische Verlagsges. CY - Melsungen ER - TY - JOUR A1 - Schmidt, Oliver G. A1 - Denker, Ullrich A1 - Dashiell, Michael W. A1 - Jin-Phillipp, Neng Yun A1 - Eberl, Karl A1 - Schreiner, Rupert A1 - Gräbeldinger, Hedwig A1 - Schweizer, Heinz C. A1 - Christiansen, Silke H. A1 - Ernst, Frank T1 - Laterally aligned Ge/Si islands: a new concept for faster field-effect transistors JF - Materials Science and Engineering B N2 - Self-assembled and coherently strained Ge dots were grown on a Si/SiGe superlattice, which was deposited on a flat Si(001) substrate surface patterned with a regular array of straight trenches. The superlattice translates the surface modulation of the substrate into a strain-field modulation, which causes the Ge dots on its surface to form along straight lines above the buried trenches. This approach provides self-assembled Ge dots with excellent lateral periodicity, which might be useful for fabricating dot-based field-effect-transistors (DotFETs). Here, we propose the concept of a modulation-doped p-channel DotFET (p-MOD-DotFET). The p-MOD-DotFET relies on embedded Ge-rich nanostructures, which provide p-channels through the Ge-rich dots. A high Ge concentration in the dots is desirable in order to exploit the high hole mobility of Ge-rich material. We show that the commonly observed Si–Ge intermixing during Si capping of Ge dots can be suppressed by overgrowing the islands at low temperature. KW - Field-effect transistor KW - Self-assembly islands KW - CMOS KW - MOSFET KW - MOFDET alignment KW - Modulation Y1 - 2002 U6 - https://doi.org/10.1016/S0921-5107(01)00810-8 SN - 1873-4944 SN - 0921-5107 VL - 89 IS - 1-3 SP - 101 EP - 105 PB - Elsevier CY - New York, NY ER - TY - CHAP A1 - Morales, Juan A. A1 - Baumann, Timo A1 - Pérez, José L. A1 - Peinado, Antonio M. A1 - Gómez, Ángel M. T1 - Implementaciòn de un reconocedor distribuido de voz en tiempo real sobre IP T2 - Actas de las IV Jornadas en Tecnologías del Habla N2 - En este trabajo se presenta una implementación de unsistema de reconocimiento distribuido del habla en tiem-po real para su aplicación en un entorno de Internet. Desa-rrollado como una aplicación cliente-servidor, el clien-te hace uso del front-end estándar definido por la ETSI.Incluye un detector de voz para sólo enviar informacióncuando el locutor habla y la transmisión de la informaciónse hace de acuerdo al RFC 3557. El servidor realiza el re-conocimiento utilizando programación dinámica, incluyea su vez un detector de voz y utiliza la técnica de mitiga-ción de pérdida de paquetes propuesta en el estándar de laETSI. La modularidad del diseño permite la utilización decualquier otro reconocedor sin que por ello se vean afec-tados los clientes. Las pruebas reales de funcionamientopara la aplicación particular desarrollada han demostradouna alta fiabilidad en varias condiciones de transmisión. Y1 - 2006 UR - https://www.researchgate.net/publication/319702803_IMPLEMENTACION_DE_UN_RECONOCEDOR_DISTRIBUIDO_DE_VOZ_EN_TIEMPO_REAL_SOBRE_IP ER - TY - JOUR A1 - Nigel G. Ward, A1 - Vega, Alejandro A1 - Baumann, Timo T1 - Prosodic and Temporal Features for Language Modeling for Dialog JF - Speech Communication N2 - If we can model the cognitive and communicative processes underlying speech, we should be able to better predict what a speaker will do. With this idea as inspiration, we examine a number of prosodic and timing features as potential sources of information on what words the speaker is likely to say next. In spontaneous dialog we find that word probabilities do vary with such features. Using perplexity as the metric, the most informative of these included recent speaking rate, volume, and pitch, and time until end of utterance. Using simple combinations of such features to augment trigram language models gave up to a 8.4% perplexity benefit on the Switchboard corpus, and up to a 1.0% relative reduction in word error rate (0.3% absolute) on the Verbmobil II corpus. KW - Dialog dynamics KW - Dialog state KW - Prosody KW - Interlocutor behavior KW - Word probabilities KW - Prediction KW - Perplexity KW - Speech recognition KW - Switchboard corpus KW - Verbmobil corpus Y1 - 2012 U6 - https://doi.org/10.1016/j.specom.2011.07.009 VL - 54 IS - 2 SP - 161 EP - 174 PB - ELSEVIER ER - TY - CHAP A1 - Lohmann, Kris A1 - Eichhorn, Ole A1 - Baumann, Timo T1 - Generating Situated Assisting Utterances to Facilitate Tactile-Map Understanding: A Prototype System T2 - Proceedings of the Third Workshop on Speech and Language Processing for Assistive Technologies (SLPAT), Montreal, Canada, June 7–8, 2012 N2 - Tactile maps are important substitutes for visual maps for blind and visually impaired people and the efficiency of tactile-map reading can largely be improved by giving assisting utterances that make use of spatial language. In this paper, we elaborate earlier ideas for a system that generates such utterances and present a prototype implementation based on a semantic conceptualization of the movements that the map user performs. A worked example shows the plausibility of the solution and the output that the prototype generates given input derived from experimental data. Y1 - 2012 UR - https://aclanthology.org/W12-2908.pdf SP - 56 EP - 65 PB - Association for Computational Linguistics ER - TY - CHAP A1 - Altenberger, Igor A1 - Noster, Ulf A1 - Scholtes, Berthold A1 - Ritchie, Robert O. ED - Wagner, Lothar T1 - High Temperature Fatigue of Mechanically Surface Treated Materials T2 - Shot peening N2 - Introduction The most well known effect of mechanical surface treatments on metallic materials is the improvement in fatigue properties. It is therefore not surprising that most of the archival literature on mechanical surface treatments, such as shot peening, deep rolling and laser shock peening, deals with the effect of near-surface properties on fatigue behavior. Most of these studies, however, are confined to room temperature fatigue behavior; in comparision, the effect of mechanical surface treatment on fatigue behavior at high temperatures has been rarely investigated [1-5]. The reason for this disparity can be found in the popular belief that fatigue strength improvement by mechanical surface treatments is mainly due to the presence of compressive residual stresses, and since such stresses should anneal out at elevated temperatures, mechanical surface treatments for high temperature applications would appear questionable. However, this view may be over simplistic as there is always a possibility that the residual stresses may be at least partially stable at elevated temperatures [6]; in addition, other factors may be involved, such as the nature of the near-surface microstructure. Accordingly, it is the objective of this study to examine the role of mechanical surface treatments on the high temperature fatigue behavior of several metallic engineering materials. Moreover, it is the aim of this work to clarify what are the critical temperature "thresholds' at which near-surface microstructures and residual stresses become unstable and whether this can explain the observed fatigue behavior. Y1 - 2003 SN - 9783527606580 U6 - https://doi.org/10.1002/3527606580.ch62 SP - 483 EP - 489 PB - Wiley-VCH CY - Weinheim; [Cambridge] ER - TY - BOOK A1 - Altenberger, Igor A1 - Wagner, Lothar A1 - Mhaede, Mansour A1 - Juijerm, Patiphan A1 - Noster, Ulf T1 - Effect of Deep Rolling on the Cyclic Performance of Magnesium and Aluminium Alloys in the Temperature Range 20-250°C T3 - The 10th International Conference on Shot Peening (ICSP), Conference Proceedings, Tokyo Japan, 15th to 18th September, 2008 N2 - Mechanical surface treatments such as deep rolling or laser-shock peening can markedly affect the cyclic performance of light-weight alloys, especially if significant thick work hardened surface regions are induced. At room temperature, the cyclic deformation behaviour is strongly influenced by the nature of the induced near-surface microstructures provided that they remain stable during fatigue loading. At elevated temperatures, the stability of near-surface work hardening and local microstructures plays an even more important role since the process-induced residual compressive stresses are likely to anneal out partially or completely. This overview illustrates to what extent deep rolling can effect the cyclic performance of various wrought light alloys being fatigue loaded in stress control at ambient and elevated temperatures. KW - Deep Rolling KW - Aluminum Alloys KW - Magnesium Alloys KW - High Temperature Fatigue Y1 - 2008 UR - https://www.researchgate.net/publication/273319235_Effect_of_Deep_Rolling_on_the_Cyclic_Performance_of_Magnesium_and_Aluminium_Alloys_in_the_Temperature_Range_20-250C ER - TY - CHAP A1 - Noster, Ulf A1 - Altenberger, Igor A1 - Ritchie, Robert O. A1 - Scholtes, Berthold ED - Wagner, Lothar T1 - Isothermal Fatigue Behavior and Residual Stress States of Mechanically Surface Treated Ti-6Al-4V: Laser Shock Peening vs. Deep Rolling T2 - Shot peening N2 - In this paper, the high-temperature fatigue behavior and residual stress states of a Ti-6Al-4V alloy are investigated after mechanical surface treatment. In particular, the two surface treatments investigated, laser shock peening and deep rolling, were observed to result in significantly different residual stress states. The consequent isothermal fatigue behavior at elevated temperatures, characterized using cyclic deformation curves, are discussed in terms of the stability of the near-surface work hardening and compressive residual stresses. Despite pronounced relaxation of the residual stresses, both laser shock peening and deep rolling led to a significant improvement in the cyclic deformation behavior and, hence, increased fatigue lifetimes at elevated temperatures as compared to untreated materials states. Y1 - 2003 SN - 9783527606580 U6 - https://doi.org/10.1002/3527606580.ch57 SP - 447 EP - 453 PB - Wiley-VCH CY - Weinheim; [Cambridge] ER - TY - JOUR A1 - Noster, Ulf A1 - Scholtes, Berthold T1 - Isothermal strain-controlled quasi-static and cyclic deformation behavior of magnesium wrought alloy AZ31 JF - International Journal of Materials Research / Zeitschrift für Metallkunde N2 - The low-cycle and high-cycle fatigue behavior of the Mg-base wrought alloy AZ31 is investigated in the temperature range 20– 300 °C using total-strain-controlled push – pull tests. It is shown that the mechanical properties of the material are substantially influenced by the direction dependent formation of deformation twins and resulting deformation asymmetry. As a consequence tensile mean stresses develop during total-strain-controlled fatigue tests without mean strain. Y1 - 2003 U6 - https://doi.org/10.1515/ijmr-2003-0098 VL - 94 IS - 5 SP - 559 EP - 563 ER - TY - JOUR A1 - Bitsche, Robert A1 - Noster, Ulf A1 - Peterlechner, Christian T1 - Fügepartner schlüssig zu Leichtbaukomponenten verbinden? JF - Lightweight Design N2 - Kombinationen aus kraft- und formschlüssigen Verbindungen erhöhen die Leistung bei im Hybridguss verbundenen Gussteilen mit Anbau- oder Einlegeteilen und machen separate Fügeprozesse überflüssig. Simulations-Methoden unterstützen das Design kraft- und formschlüssiger Verbindungen. Ergebnisse eines Ausdrückversuchs zeigen eine relativ gute Übereinstimmung zwischen gemessenen und mittels Simulation ermittelten Kraft-Weg-Kurven. Y1 - 2008 U6 - https://doi.org/10.1007/BF03223528 VL - 1 IS - 2 SP - 30 EP - 34 PB - Springer ER - TY - CHAP A1 - Billinger, Wolfgang A1 - Noster, Ulf ED - Degischer, Hans Peter T1 - Bauteilfertigung T2 - Leichtbau Y1 - 2009 SN - 9783527628247 U6 - https://doi.org/10.1002/9783527628247.ch4 SP - 247 EP - 278 PB - Wiley-VCH CY - Weinheim ER - TY - BOOK A1 - Schildbach, Ina T1 - Armut als Unrecht : Zur Aktualität von Hegels Perspektive auf Selbstverwirklichung, Armut und Sozialstaat N2 - Seit den Anfängen der bürgerlichen Gesellschaft gibt es »künstlich produzierte Armut« (Marx) – künstlich, weil sie, wie Hegel analysiert hat, nicht auf natürlichem Mangel beruht, sondern ihre Notwendigkeit im Recht auf Eigentum liegt. Auch wusste der Philosoph: Ohne materielle Mittel gibt es keine Selbstverwirklichung. Die von Hegel theoretisch vorweggenommenen Konsequenzen wie der Zusammenhang mit geringerer Bildung, kürzerer Lebenserwartung und politischer Apathie sind heutzutage empirisch belegt. Ina Schildbach liest Hegel neu und stellt fest: Erkenntnisbringend sind nicht nur seine Einsichten zu Ursachen und Konsequenzen der Armut – auch die staatsfunktionale Perspektive auf Armut als Problem der Obrigkeit offenbart frappierende Ähnlichkeit zum heutigen Diskurs. KW - Armut KW - Armutsforschung KW - Hegel KW - Politik KW - Politikwissenschaft KW - Politische Philosophie KW - Politische Theorie KW - Selbstverwirklichung KW - Sozialpolitik KW - Sozialstaat Y1 - 2018 SN - 978-3-8376-4443-2 U6 - https://doi.org/10.14361/9783839444436 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Braun, Carina N. T1 - Wenn uns unsere eigene Innovationskraft ausbremst JF - changement! N2 - Unternehmen stehen unter dem stetigen Druck, innovativ zu sein. Das gelingt nur, wenn Mitarbeiterinnen und Mitarbeiter die neuen Ideen auch umsetzen. Gerade in Zeiten, in denen eine Innovation auf die nächste folgt, wird das aber immer schwieriger. Denn die Frequenz und die Erfolgsrate von Innovationen werden von der Belegschaft bewertet und bestimmen über das Engagement in nachfolgenden Innovationsprozessen. Y1 - 2019 IS - 2 SP - 40 EP - 41 PB - HANDELSBLATT MEDIA GROUP CY - Hamburg ER - TY - JOUR A1 - Schildbach, Ina T1 - Rezension vom 08.06.2018 zu: Tanja Munk: Armut als Gegenstand der Ethik. Eine Rechte- und Pflichtenanalyse. Duncker & Humblot GmbH (Berlin) 2018. ISBN 978-3-428-15075-5 JF - sozialnet Rezensionen N2 - In Deutschland stellte Armut vor allem dann ein größeres öffentliches Thema dar, wenn die Bundesregierung den neuen Bericht über „Lebenslagen in Deutschland“, also den landläufig sogenannten „Armuts- und Reichtumsbericht“, herausbrachte. Das hat sich in den letzten Jahren geändert: Mit dem Auftreten von „Patriotische Europäer gegen die Islamisierung des Abendlandes“ (Pegida) und der „Alternative für Deutschland“ (AfD) sind prekäre Lebenslagen in Politik und den Medien ein zentrales Thema, das vor allem unter dem Schlagwort „die Sorgen und Ängste der Menschen ernst nehmen“ diskutiert wird. Im Frühjahr schließlich erreichte diese Debatte ihren (vorläufigen) Höhepunkt als Reaktion auf den Beschluss der Essener Tafel, vorerst keine Migranten/innen mehr aufzunehmen. Grund genug also, sich aus wissenschaftlicher Perspektive mit dem Phänomen auseinanderzusetzen. Die Dissertationsschrift „Armut als Gegenstand der Ethik. Eine Rechte- und Pflichtenanalyse“ behandelt das Thema aus philosophischer Sicht. Ziel ist die Entwicklung von „Kriterien und Anforderungen […], denen jedwede Ausgestaltung eines menschenwürdigen sozialen Minimums gerecht werden muss“ (S. 12). Anhand dieser soll schließlich beurteilt werden können, „inwieweit ein in der Sozialpolitik und -gesetzgebung oder in der empirischen Sozialforschung verwendetes Armutsverständnis einer kritischen moralischen Überprüfung standhält oder sich als korrektur- und ergänzungsbedürftig erweist“ (ebd.). Y1 - 2018 UR - https://www.socialnet.de/rezensionen/24122.php SN - 2190-9245 PB - socialnet GmbH ER - TY - JOUR A1 - Braun, Carina N. A1 - Voußem, Ludwig T1 - Auszubildende erfolgreich an Land ziehen JF - Personalwirtschaft N2 - Forschungsfragen: Wie rekrutieren Unternehmen Auszubildende? Wie offen sind sie für Innovationen? Was sind wesentliche Faktoren für einen erfolgreichen Bewerbungsprozess? Forschungsansatz: Im Rahmen einer Studie hat die OTH Regensburg die Merkmale des Bewerbungsprozesses entlang der Candidate Journey erfasst – von der ersten Berufswahl und Stellensuche bis zur Einstellung. Die insgesamt 160 befragten Ausbildungsbetriebe repräsentieren einen breiten Mix unterschiedlicher Unternehmensgrößen und -branchen. Zentrale Ergebnisse: Unternehmen nutzen Rekrutierungskanäle nicht in voller Breite und schöpfen auch das Potenzial technischer Innovationen noch nicht umfassend aus. Klarheit bezüglich der erwarteten Anforderungen sowie Schnelligkeit, Transparenz und Einfachheit im Bewerbungsprozess sind empirisch nachweisbare Erfolgsfaktoren. Wertschätzung ist ein Aspekt, der (noch stärker) an jedem Touchpoint im Bewerbungsprozess beachtet werden sollte. Y1 - 2018 IS - 11 SP - 58 EP - 61 PB - F.A.Z. BUSINESS MEDIA CY - Frankfurt ER - TY - JOUR A1 - Schildbach, Ina T1 - Was ist der ‚angemessene’ Armutsbegriff? Eine sozialethische Kritik der Debatte JF - Sozialmagazin N2 - Nach dem Erscheinen des "5. Armuts- und Reichtumsbericht" der Bundesregierung im April 2017 stellt sich erneut die häufig debattierte Frage nach der "angemessenen" Definition von Armut. Darüber lässt sich trefflich streiten. Sie geht jedoch am Kern des Themas vorbei: Mit der Fokussierung auf das vermeintlich richtige Messen geht eine Verwandlung des Armutsbegriffes einher, die die eigentlichen Fragen ausblendet. Y1 - 2017 UR - https://content-select.com/de/portal/media/view/5936970e-43c8-4bc7-b216-1502b0dd2d03 SN - 0340-8469 VL - 42 IS - 5-6 SP - 50 EP - 55 PB - Beltz Juventa ER - TY - JOUR A1 - Schildbach, Ina T1 - Rezension vom 20.04.2020 zu: Margrit Stamm (Hrsg.): Arbeiterkinder und ihre Aufstiegsangst. Probleme und Chancen von jungen Menschen auf dem Weg nach oben. Verlag Barbara Budrich GmbH (Opladen, Berlin, Toronto) 2019. ISBN 978-3-8474-2291-4 JF - Socialnet Rezensionen Y1 - 2019 UR - https://www.socialnet.de/rezensionen/26208.php SN - 2190-9245 PB - socialnet GmbH ER -