TY - CHAP A1 - Xue, Lufeng A1 - Paredes, Marcelo A1 - Nonn, Aida A1 - Wierzbicki, Tomasz T1 - Modeling of Crack Propagation in Defective X100 Line Pipes T2 - ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering: August 3-7, 2020, virtual, online N2 - A comprehensive experimental program is carried out to determine material parameters for fracture initiation and propagation in X100 pipeline steels. The quadratic Hill’48 yield function along with an isotropic hardening are used to describe plastic flow at large deformation and a phenomenological fracture criterion to predict fracture initiation. Fracture mechanics SENT specimens are used to calibrate post-initiation softening parameters necessary for ductile crack propagation in thick components. Once the material model parameters set is complete a final comparison is conducted with ring expansion test on same material. KW - Berg KW - Bruchmechanik KW - Pipeline KW - plastisches Fließen KW - Rissausbreitung KW - Versuchsprogramm KW - Werkstoffmodell KW - Werkstoffparameter Y1 - 2020 SN - 978-0-7918-8434-8 U6 - https://doi.org/10.1115/OMAE2020-18048 PB - American Society of Mechanical Engineers CY - New York ER - TY - CHAP A1 - Nonn, Aida A1 - Paredes, Marcelo A1 - Nordhagen, H. O. A1 - Munkejord, S. T. A1 - Wierzbicki, Tomasz T1 - Challenges in fluid-structure modeling of crack propagation and arrest in modern steel pipelines T2 - 14th International Congress on Fracture (ICF14), 18-23 June 2017, Rhodes, Greece Y1 - 2017 SP - 1351 EP - 1352 ER - TY - CHAP A1 - Paredes, Marcelo A1 - Keim, Vincent A1 - Nonn, Aida A1 - Wierzbicki, Tomasz T1 - Effect of plasticity parameter on the crack propagation in steel pipelines T2 - Proceedings of the conference on Technology for future and ageing piplines, Ghent, Belgium Y1 - 2018 ER - TY - CHAP A1 - Nonn, Aida A1 - Paredes, Marcelo A1 - Keim, Vincent A1 - Wierzbicki, Tomasz T1 - Comparison of Fracture Models to Quantify the Effects of Material Plasticity on the Ductile Fracture Propagation in Pipelines T2 - Proceedings of the 2018 12th International Pipeline Conference, Volume 3: Operations, Monitoring, and Maintenance, Materials and Joining, September 24-28, 2018, Calgary, Alberta, Canada N2 - Various numerical approaches have been developed in the last years aimed to simulate the ductile fracture propagation in pipelines transporting CO2 or natural gas. However, a reliable quantification of the influence of material plasticity on the fracture resistance is still missing. Therefore, more accurate description of the material plasticity on the ductile fracture propagation is required based on a suitable numerical methodology. In this study, different plasticity and fracture models are compared regarding the ductile fracture propagation in X100 pipeline steel with the objective to quantify the influence of plasticity parameters on the fracture resistance. The plastic behavior of the investigated material is considered by the quadratic yield surface in conjunction with a non-associated quadratic plastic flow potential. The strain hardening can be appropriately described by the mixed Swift-Voce law. The simulations of ductile fracture are conducted by an uncoupled, modified Mohr-Coulomb (MMC) and the micromechanically based Gurson-Tvergaard-Needleman (GTN) models. In contract to the original GTN model, the MMC model is capable of describing ductile failure over wide range of stress states. Thus, ductile fracture resistance can be estimated for various load and fracture scenarios. Both models are used for the simulation of fracture propagation in DWTT and 3D pressurized pipe sections. The results from the present work can serve as a basis for establishing the correlation between plasticity parameters and ductile fracture propagation. Y1 - 2018 U6 - https://doi.org/10.1115/IPC2018-78366 ER - TY - JOUR A1 - Keim, Vincent A1 - Paredes, Marcelo A1 - Nonn, Aida A1 - Münstermann, Sebastian T1 - FSI-simulation of ductile fracture propagation and arrest in pipelines BT - Comparison with existing data of full-scale burst tests JF - International Journal of Pressure Vessels and Piping N2 - The fracture propagation and arrest control for pipelines transporting rich natural gases and high vapor pressure liquids is based on the Battelle Two-Curve Model (BTCM). Distinct limitations of this model were demonstrated for past and modern steels and gas mixtures. These can be related to the insufficient description of individual physical processes and interactions between the pipe material and transported mixture during the running ductile fracture. In the past, fluid-structure interaction (FSI) models enabled a more sophisticated, coupled analysis of the failure scenario. To quantify their capability of describing the multi-physical processes, the FSI models need to be verified by experimental data from full-scale burst tests (FSBT). Therefore, this paper deals with the simulation of five FSBTs from the literature on API grade X65 pipes with different pipe geometries, mixtures and initial conditions. The FSI is modeled by the coupled Euler-Lagrange (CEL) method. The modified Mohr-Coulomb (MMC) model is implemented in the CEL framework to describe the deformation and ductile fracture in the X65/L450 pipes. 3D Euler equations are used to calculate the mixture decompression with the GERG-2008 equation of state defining the volumetric behavior of a CO2-rich mixture, CH4 and H2. The extended model considers the effect of soil backfill on the pipe deformation and inertia. The numerical predictions agree well with the experimental findings in terms of the crack propagation speed and arrest length underlining the capability of the developed numerical tool. KW - Running ductile fracture KW - Crack arrest KW - Fluid-structure interaction KW - MMC model KW - CO2 decompression KW - Bruchmechanik KW - Fluid-Struktur-Wechselwirkung KW - Pipeline KW - Simulation Y1 - 2020 U6 - https://doi.org/10.1016/j.ijpvp.2020.104067 VL - 182 IS - May PB - Elsevier ER -