TY - GEN A1 - Katsilieri, Zaira A1 - Maerz, Manuel A1 - Löschel, Rainer A1 - Kölbl, Oliver A1 - Dobler, Barbara T1 - Error detection sensitivity of a commercially available system for 3D plan verifications T2 - Physica Medica - European Journal of Medical Physics N2 - Purpose The complexity of the treatment techniques IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc Therapy) introduced the requirement of an individual plan verification. The latest development is 3D verification which allows evaluation in terms of 3D gamma values but also a judgment based on differences in dose distributions on individual patient CT data and in dose volume histograms. For a verification tool the error detection sensitivity is important. The purpose of this work is to evaluate the accuracy and the sensitivity of the gamma evaluation of the 3D verification software MobiusFx when a systematic error in one parameter is applied. The results are compared to an established 2D-measurement based method. Methods 11 IMRT and 11 VMAT plans were selected as reference plans. For every reference plan a systematic offset of 1 mm, 2 mm and 3 mm in the same direction was applied to the Multi-Leaf-Collimator (MLC) positions. All plans were irradiated and verified simultaneously with MobiusFx and MatriXX Evolution 2D array measurement. For both verification systems the applied dose distributions were evaluated using the gamma method based on the reference plans. In MobiusFx additionally the MLC position errors were evaluated. Results Regarding the gamma evaluation results, MobiusFx and MatriXX Evolution 2D measurements have almost the same sensitivity: The gamma evaluation of both systems detected shifts of 1 mm in VMAT plans and shifts of 2 mm and larger in IMRT plans. The information of the MLC position error provided by MobiusFx allows further to detect errors down to a shift of 1 mm in IMRT plans, giving an advantage over the MatriXX measurement. Conclusions MobiusFx shows a high error detection sensitivity, comparable to MatriXX Evolution. Through the gamma calculation and the MLC position error it is possible to detect errors down to a shift in MLC positions of 1 mm. It is recommended to inspect all the above parameters during plan verification. Y1 - 2018 U6 - https://doi.org/10.1016/j.ejmp.2018.06.106 VL - 52 PB - Elsevier ER - TY - JOUR A1 - Herrmann, Frank A1 - Nangmo Wanko, Merveille A1 - Zeller, Bernhard T1 - Digitale Transformation in Echtzeit: Die Ziele von morgen basierend auf dem Datenmodell von gestern JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Digitale Transformation fordert Unternehmen aller Couleur. Ironischer Weise sind es gerade die bisher verwendeten IT-Systeme mit ihren starren Strukturen, die Unternehmen in Ihrer digitalen Trans-formation oft ausbremsen. Auch wenn die Soft-warehersteller längst reagiert haben und neue, flexib-lere Versionen ihrer Produkte anbieten, so ist ein größerer Softwarewechsel immer noch eine Heraus-forderung für Unternehmen und ein Schritt der wohl-überlegt und geplant sein will. In dieser Arbeit wird deshalb ein Vorgehen vorge-stellt, um mittels In-Memory Technologie und Vir-tualisierung zumindest die wichtigsten Ergebnisse der Transformation bereits auf den bestehenden Da-tenmodellen in Echtzeit zu generieren. Dadurch wird genug Zeit gewonnen, um die eigentliche Transfor-mation der IT-Landschaft geplant und mit der not-wendigen Sorgfalt durchzuführen. KW - Digitale Transformation KW - Strategie KW - ALV-GRID KW - Dynpro Y1 - 2022 U6 - https://doi.org/10.26034/lu.akwi.2022.3453 SN - 2296-4592 VL - 16 SP - 37 EP - 47 PB - Technische Hochschule Wildau ER - TY - GEN A1 - Ramsauer, Ralf A1 - Bulwahn, Lukas A1 - Lohmann, Daniel A1 - Mauerer, Wolfgang T1 - The Sound of Silence: Mining Security Vulnerabilities from Secret Integration Channels in Open-Source Projects T2 - MiniDebConf Regensburg (MDC) 2021 Y1 - 2021 UR - https://gemmei.ftp.acc.umu.se/pub/debian-meetings/2021/MiniDebConf-Regensburg/sound-of-silence.webm CY - Regensburg ER - TY - GEN A1 - Treutwein, Marius A1 - Hipp, Matthias A1 - Löschel, Rainer A1 - Kölbl, Oliver A1 - Dobler, Barbara T1 - Second cancer risk after radiation of localized prostate cancer with and without flattening filter T2 - Radiotherapy and oncology Y1 - 2017 U6 - https://doi.org/10.1016/S0167-8140(17)32050-9 VL - 123 IS - 1 PB - Elsevier ER - TY - GEN A1 - Meyer-Sickendiek, Burkhard A1 - Baumann, Timo A1 - Hussein, Hussein T1 - Requirements on the Punctuation Reconstruction for the Translation of Post-modern Poetry T2 - DHd 2020 ; Spielräume ; Digital Humanities zwischen Modellierung und Interpretation ; Konferenzabstracts ; Universität Paderborn 02. bis 06. März 2020 Y1 - 2020 SN - 978-3-945437-07-0 U6 - https://doi.org/10.5281/zenodo.4621722 PB - Universität Paderborn CY - Paderborn ER - TY - GEN A1 - Baumann, Timo ED - Devillers, Laurence ED - Kawahara, Tatsuya ED - Moore, Roger K. ED - Scheutz, Matthias T1 - Ubiquity of Computing and SLIVAR BT - Towards Effective and Ethical Interaction T2 - Spoken Language Interaction with Virtual Agents and Robots (SLIVAR): Towards Effective and Ethical Interaction KW - human-robot interaction KW - spoken language processing KW - virtual agents Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0030-drops-124009 VL - 10 PB - Schloss Dagstuhl ‐ Leibniz-Zentrum für Informatik CY - Dagstuhl, Germany ER - TY - GEN A1 - Meyer-Sickendiek, Burkhard A1 - Hussein, Hussein A1 - Baumann, Timo T1 - From Fluency To Disfluency: Ranking Prosodic Features Of Poetry By Using Neural Networks T2 - Proceedings of the International Conference on Digital Humanities (DH 2019), Utrecht, the Netherlands 9-12 July, 2019 Y1 - 2019 U6 - https://doi.org/10.34894/EGZNMI ER - TY - GEN A1 - Schildgen, Johannes T1 - Sprachkurs Java BT - Das Hörbuch über objektorientierte Programmierung N2 - Java ist eine der populärsten Programmiersprachen überhaupt. Lerne in diesem Hörbuch die Sprache Java und die Konzepte der objektorientierten Programmierung kennen, egal ob bei der Autofahrt, beim Putzen oder Kochen. Wir beginnen mit den Grundlagen übers Programmieren im Allgemeinen. Ein Vorwissen in einer Programmiersprache ist zwar hilfreich, aber absolut nicht notwendig. Du lernst, was Variablen, Schleifen, Klassen und Methoden sind und wie du sie verwendest. Eines der wichtigsten Konzepte der objektorientierten Programmierung nennt sich Vererbung. Daher wirst du alles dazu lernen, was du wissen musst. Auch den Umgang mit Exceptions und mit Dateien will ich dir ans Herz legen. Du lernst zudem die verschiedenen Collection-Types, Generics und Lambda-Ausdrücke kennen. Außerdem gibt's am Ende noch einen Ausblick, der zeigt, was du mit Java alles programmieren kannst: Android-Apps, GUI-Anwendungen, Web-Apps und vieles mehr. Programmieren lernen mit einem Hörbuch ist ein innovatives Format und bietet interaktive Möglichkeiten der Lernkontrolle in Form von Quiz-Fragen, bei denen du als Hörer aktiv mitmachen kannst. Y1 - 2022 SN - 9783944787404 N1 - MP3 Audio CD PB - oomoxx media e.K. CY - Cuxhafen ET - 1. Aufl. ER - TY - JOUR A1 - Weber, Karsten T1 - Smart JF - Der blaue reiter - Journal für Philosophie Y1 - 2018 SN - 0947-6563 VL - 41 IS - 1 SP - 88 EP - 89 PB - Verl. für Philosophie Reusch ER - TY - CHAP A1 - Windbühler, Anna A1 - Okkesim, Sükrü A1 - Christ, Olaf A1 - Mottaghi, Soheil A1 - Rastogi, Shavika A1 - Schmuker, Michael A1 - Baumann, Timo A1 - Hofmann, Ulrich G. T1 - Machine Learning Approaches to Classify Anatomical Regions in Rodent Brain from High Density Recordings T2 - 44th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2022): 11-15 July 2022, Glasgow, Scotland, United Kingdom N2 - Identifying different functional regions during a brain surgery is a challenging task usually performed by highly specialized neurophysiologists. Progress in this field may be used to improve in situ brain navigation and will serve as an important building block to minimize the number of animals in preclinical brain research required by properly positioning implants intraoperatively. The study at hand aims to correlate recorded extracellular signals with the volume of origin by deep learning methods. Our work establishes connections between the position in the brain and recorded high-density neural signals. This was achieved by evaluating the performance of BLSTM, BGRU, QRNN and CNN neural network architectures on multisite electrophysiological data sets. All networks were able to successfully distinguish cortical and thalamic brain regions according to their respective neural signals. The BGRU provides the best results with an accuracy of 88.6 % and demonstrates that this classification task might be solved in higher detail while minimizing complex preprocessing steps. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-35296 SP - 3530 EP - 3533 PB - IEEE ER - TY - GEN A1 - Mauerer, Wolfgang T1 - Embedded Linux Quality Assurance: How to Not Lie with Statistics T2 - Embedded Linux Conference North America ; OpenIoTSummit North America N2 - Embedded Linux drives an every-increasing number of appliances in many domains and applications, some even real-time and/or safety critical. Traditional quality assurance of such systems is based on testing and formal verification, but the huge amount of code and the rapid dynamics of the Linux ecosystem, as well as fundamental limitations of formal methods make these approaches unsatisfactory. Statistical quality assurance for reliability, error rates, maximal latencies etc. is needed. We will discuss current best practises, how to design and run automated statistical tests that capture relevant information, and how to properly evaluate the resulting data. Practical real-world examples and recipes are played through using the open source R language. Most importantly, we identify common mistakes in (over-)interpreting statistical results and predictions that may eventually harm people. Y1 - 2018 UR - https://www.youtube.com/watch?v=8671RYrsAj4 ER - TY - GEN A1 - Ramsauer, Ralf A1 - Kiszka, Jan A1 - Mauerer, Wolfgang T1 - Building Mixed Criticality Linux Systems with the Jailhouse Hypervisor T2 - Embedded Lunux Conference + OpenIoTSummit, Portland, OR, 21.-23.02.2017 N2 - The partitioning hypervisor Jaihouse allows us to run safety critical and uncritical applications in parallel on a single SoC. We present our experiences when porting a safety and real-time critical existing application as a Jailhouse guest. It shows a novel and promising approach for implementing mixed-criticality applications with real-time requirement while not loosing the benefits of Linux. This is done by static partitioning of hardware resources; guests do not interfere. We will present a multicopter platform running the real-time critical flight stack in an isolated Jailhouse guest. This proves the practicability of Jailhouse as well as the suitability for real-time safety critical systems by porting an existing application to a Jailhouse cell. We stress its concept and show up current hardware limitations, like undesired behaviour and present possible workarounds and solutions. Y1 - 2017 UR - https://www.youtube.com/watch?v=pvs0fv-gnvw ER - TY - GEN A1 - Ramsauer, Ralf A1 - Duda, Sebastian A1 - Bulwahn, Lukas A1 - Mauerer, Wolfgang T1 - The list is our process! An analysis of the kernel’s email-based development process T2 - Embedded Linux Conference Europe, Lyon 28.10.2019 Y1 - 2019 UR - https://elinux.org/images/0/09/Pasta-elce19.pdf ER - TY - GEN A1 - Ramsauer, Ralf A1 - Duda, Sebastian A1 - Mauerer, Wolfgang A1 - Bulwahn, Lukas T1 - The list is our process: An analysis of the kernel’s email-based development process T2 - Linux Plumbers Conference, Lisbon September 9, 2019 Y1 - 2019 UR - https://www.youtube.com/watch?v=QG1YDQ1HOKE ER - TY - GEN A1 - Ramsauer, Ralf A1 - Kiszka, Jan A1 - Lohmann, Daniel A1 - Mauerer, Wolfgang T1 - Implementierung gemischt kritischer Systeme durch statische Hardwarepartitionierung T2 - Frühjahrstreffen der Fachgruppen Betriebssysteme, Hannover, 2. März 2018 Y1 - 2018 UR - https://www.betriebssysteme.org/wp-content/uploads/2018/04/fgbs18-169.pdf ER - TY - GEN A1 - Mauerer, Wolfgang T1 - Safety, Security, Quality: Artificial Intelligence versus Common Sense T2 - Open Source Summit North America and Embedded Linux Conference North America 2020 Y1 - 2020 UR - https://www.youtube.com/watch?v=Ow_tMneQlH4 UR - https://elinux.org/images/7/7d/Wolfgang_Mauerer.pdf ER - TY - GEN A1 - Ramsauer, Ralf A1 - Kiszka, Jan A1 - Mauerer, Wolfgang T1 - Spectre and Meltdown vs. Real-Time: How Much do Mitigations Cost? T2 - Embedded Linux Conference Europe 2018, October 22 - 24, 2018, Edinburgh, UK Y1 - 2018 UR - https://www.youtube.com/watch?v=nqU4j2M_Ul4 ER - TY - GEN A1 - Mauerer, Wolfgang T1 - Open Source in Research and Reality T2 - Open Source Summit North America and Embedded Linux Conference North America 2020 Y1 - 2020 UR - https://www.youtube.com/watch?v=L2iubyD1e7U ER - TY - GEN A1 - Ramsauer, Ralf A1 - Lohmann, Daniel A1 - Mauerer, Wolfgang T1 - Quantifying Upstream Integration with PaStA T2 - LTSI Workshop @ ELC17 Y1 - 2017 ER - TY - GEN A1 - Herrmann, Frank T1 - Simulation and Modelling in Supply Chains T2 - 13th International Conference on Advances in System Simulation, SIMUL 2021, October 03 - 07, 2021 in Barcelona, Spain Y1 - 2021 PB - IARIA XPS Press ER - TY - GEN A1 - Mauerer, Wolfgang T1 - Approaches to Ultra Long-Term System Maintenance T2 - Embedded Linux Conference Europe (Berlin), 2016 Y1 - 2016 UR - https://www.youtube.com/watch?v=SAbrQqSC61M ER - TY - GEN A1 - Mauerer, Wolfgang T1 - Socio-Technical Aspects of Long Term Embedded Systems Maintenance T2 - Embedded Linux Conference, April 4-6, 2016, San Diego Y1 - 2016 ER - TY - GEN A1 - Englberger, Julian A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Berücksichtigung stochastischer Einflüsse bei der Hauptproduktionsprogrammplanung T2 - Im Mix der Methoden - Neue Perspektiven der Produktionswirtschaft. 1. Doktorandenworkshop der Wissenschaftlichen Kommission für Produktionswirtschaft, 19./20. März 2021, Berlin Y1 - 2021 PB - TU Berlin ER - TY - GEN A1 - Tsai, Vivian A1 - Baumann, Timo A1 - Pecune, Florian A1 - Cassell, Justine T1 - Faster Responses are Better Responses: Introducing Incrementality into Sociable Virtual Personal Assistants Y1 - 2018 UR - https://colips.org/conferences/iwsds2018/wp/wp-content/uploads/2018/05/IWSDS-2018_paper_42_presentation.pdf ER - TY - GEN A1 - Frikel, Jürgen A1 - Göppel, Simon A1 - Haltmeier, Markus T1 - Combining reconstruction and edge detection in CT T2 - BVM Workshop 2023, 02.-04. Juli 2023, Braunschweig N2 - We present two methods that combine image reconstruction and edge detection in computed tomography (CT) scans. Our first method is as an extension of the prominent filtered backprojection algorithm. In our second method we employ ℓ1-regularization for stable calculation of the gradient. As opposed to the first method, we show that this approach is able to compensate for undersampled CT data. Y1 - 2021 UR - https://www.bvm-workshop.org/wp-content/uploads/2021/02/3091_poster.pdf ER - TY - GEN A1 - Frikel, Jürgen T1 - Adapted curvelet sparse regularization in limited angle tomography T2 - Summer School: New Trends and Directions in Harmonic Analysis, Fractional Operator Theory, and Image Analysis, Inzell, Germany, September 17 - 21, 2012 Y1 - 2012 UR - https://www.fim.uni-passau.de/fileadmin/dokumente/fakultaeten/fim/lehrstuhl/forster-heinlein/Inzell2012/Inzell_Frikel_2012_small.pdf ER - TY - GEN A1 - Mintel, Mario A1 - Ramsauer, Ralf A1 - Lohmann, Daniel A1 - Scherzinger, Stefanie A1 - Mauerer, Wolfgang T1 - Fork à la carte für In-Memory-Datenbanken T2 - Frühjahrstreffen der Fachgruppen Betriebssysteme, Hamburg, 17. März 2022 Y1 - 2022 UR - https://www.lfdr.de/Publications/2022/FGBS_Spring22_Mintel.pdf ER - TY - JOUR A1 - Herrmann, Frank T1 - Effiziente und effektive Lagerhaltung - IT-gestützte Durchführung von Bestandsmanagementprojekten JF - Anwendungen und Konzepte der Wirtschaftsinformatik (AKWI) N2 - Ein effizientes und effektives Bestandsmanagement ist zentral für geringe Auswirkungen durch fehlende Produkte und geringe Lagerhaltungskosten. Die für viele Unternehmen geeigneten Formeln zum Bestandsmanagement und seine produktspezifische Anwendung werden in einem Leitfaden zusammengefasst und anhand eines realen Anwendungsfalls erläutert. Seine manuelle Durchführung ist sehr aufwendig. Es wird erläutert, welche Schritte des Leitfadens wie durch ein Programm durchgeführt werden können. KW - Bestandsmanagement KW - Einführung KW - Lagerhaltungsverfahren KW - Leitfaden KW - durch Softwaresystem umsetzbar industrielle Anwendung KW - industrielle Anwendung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1940 UR - https://ojs-hslu.ch/ojs302/index.php/AKWI/article/view/29 VL - 2 SP - 1 EP - 16 ER - TY - JOUR A1 - Muck, Christina A1 - Dietz, Fabian A1 - Herrmann, Frank T1 - Vereinheitlichung materialkennzeichnender Etiketten am Beispiel der Krones AG JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Krones AG verwendet zur Materialidentifikation Haftetiketten, die die produktbezogenen Informationen beinhalten. Aufgrund eines fehlenden Unternehmensstandards in Bezug auf die Gestaltung des Etikettenlayouts soll im Zuge eines Projektes die Vereinheitlichung der Materialetiketten thematisiert werden. Neben der Gestaltung eines einheitlichen Layouts erfolgt die Festlegung der Form der Informationen. Durch maschinenlesbare Abbildung der Informationen wird die automatische systemseitige Informationsverarbeitung möglich. Dies führt einerseits zu kürzeren Prozesszeiten, da der Eingabeaufwand entfällt. Gleichzeitig garantiert man so die fehlerfreie Datenübertragung, da manuelle Eingabefehler verhindert werden. Im Rahmen dieser Ausarbeitung wird aufgezeigt, welche Vorgaben und Richtlinien bezüglich einer Standardisierung existieren und wie diese am Beispiel der Krones AG umgesetzt werden. Nach umfassender Aufnahme und Analyse des derzeitigen Ist-Zustandes folgen Festlegungen für die zukünftige Struktur. Somit wird die Basis für die systemseitige Implementierung des Änderungsvorhabens geschaffen. Weiter werden alternative Möglichkeiten zur Warenidentifikation und -nachverfolgbarkeit aufgezeigt und erläutert, welche Herausforderungen es dabei im Zeitalter von Industrie 4.0 zu meistern gilt. KW - Warenidentifikation KW - Standardisierung KW - Digitalisierung KW - Identifikation KW - Ware KW - Standardisierung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1919 IS - 6 SP - 66 EP - 75 PB - AKWI ER - TY - JOUR A1 - Seck, Veronika A1 - Buchschmid, Johann A1 - Herrmann, Frank T1 - Edelmetallcontrolling in einer Halbleiterfabrik BT - Analyse und Planung der Umsetzung in der SAP-Umgebung JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Beim Edelmetallcontrolling von Infineon sind Fehler nur mit hohem Aufwand analysierbar und es bewirkt widersprechende Berechnungshinweise. Alle vier Perspektiven des Edelmetallcontrollings werden verbessert und als einzige Datenquelle wird die von SAP festgesetzt. Weitere Verbesserungen werden durch die Umwandlung einer monatlichen Kursänderungserhebung in eine jährliche, durch die Verwendung des Marktwerts für den Bestandswert sowie durch Ermittlung eines Normwerts für eine jährliche Recyclingquote erzielt. KW - Edelmetall KW - Rohstoff KW - Controlling KW - Controlling KW - Edelmetalle KW - Kontrollsystem KW - SAP Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1892 IS - 9 SP - 12 EP - 24 PB - AKWI ER - TY - JOUR A1 - Tran, Phong A1 - Herrmann, Frank T1 - Teilautomatisierung der Testspezifikation einer Blasmaschine der Krones AG JF - Anwendungen und Konzepte der Wirtschaftsinformatik (AKWI) N2 - In der Krones AG werden alle Blasmaschinen eines neuen Kundenauftrags ¬ sowohl als Teil einer Komplettanalage als auch einzeln – Vortests unterzogen, um sicherzustellen, dass die Maschine die kundenspezifischen Anforderungen an die speziellen Konfigurationen der Flaschenform erfüllt. Diese Prüfungen erfordern Testmaterialien, bei denen es sich im Fall der Blasmaschinen um Behälter ¬– auch Preforms genannt – handelt, die als Ausgangsprodukt für die Herstellung der eigentlichen Flaschen verwendet werden. Aus diesem Grund müssen mit jedem neuen Kundenauftrag, der eine Blasmaschine beinhaltet, Testmaterialien in ausreichender Anzahl angefordert werden. Diese werden firmenintern produziert und müssen je nach Maschinenkonfiguration in der benötigten Anzahl bereitgestellt werden, um ausführliche Tests durchzuführen. Die Bestellungen erfolgen bisher stets mittels Formulare in Form von Word-Dokumenten, auch Flaschenanforderungen genannt, die manuell vom Vertrieb ausgefüllt werden. Dieser Vorgang erfordert viel Zeit und Ressourcen und soll aus diesem Grund automatisierter ablaufen. Ziel dieses Projekts ist eine Konzeption und Umsetzung einer neuen Funktion, die den alten Prozess ablöst und durch eine effizientere Lösung ersetzt. Hierbei soll zunächst die Funktionalität als eigenständiges Programm entwickelt werden. Benötigt wird eine Konzeption und Implementierung einer geeigneten graphischen Oberfläche sowie ein Programm, das automatisch die benötigten Daten zusammenfasst und diese in übersichtlicher Form darstellt. KW - Produkttest KW - Spezifikation KW - Anlagenbau KW - Digitalisierung KW - Prozessverbesserung KW - SAP-Transaktion Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1923 IS - 5 SP - 13 EP - 23 PB - AKWI ER - TY - JOUR A1 - Herrmann, Frank T1 - Using Optimization Models for Scheduling in Enterprise Resource Planning Systems JF - Systems N2 - Companies often use specially-designed production systems and change them from time to time. They produce small batches in order to satisfy specific demands with the least tardiness. This imposes high demands on high-performance scheduling algorithms which can be rapidly adapted to changes in the production system. As a solution, this paper proposes a generic approach: solutions were obtained using a widely-used commercially-available tool for solving linear optimization models, which is available in an Enterprise Resource Planning System (in the SAP system for example) or can be connected to it. In a real-world application of a flow shop with special restrictions this approach is successfully used on a standard personal computer. Thus, the main implication is that optimal scheduling with a commercially-available tool, incorporated in an Enterprise Resource Planning System, may be the best approach. KW - Enterprise-Resource-Planning KW - Produktionsplanung KW - Lineare Optimierung KW - Scheduling KW - Optimization model KW - Real world application KW - Enterprise resource planning system KW - Material requirements planning II KW - Priority rules Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2036 VL - 4 IS - 1 ER - TY - JOUR A1 - Rueck, Philip A1 - Herrmann, Frank A1 - Schuierer, Maximilian T1 - Automatisierung von Akzeptanztests im Bereich der Web-Entwicklung JF - Anwendungen und Konzepte der Wirtschaftsinformatik (AKWI) N2 - Jede Art von Software muss heutzutage höchsten Anforderungen genügen. Das Testen von Software bildet demnach einen wesentlichen und zunehmend wichtigeren Teil des Softwareentwicklungszyklus. In Zeiten der Digitalisierung ist in vielen Softwareprojekten mittlerweile eine Form der Testautomatisierung integriert. Testautomatisierung ermöglicht die Überprüfung von Anforderungen in hohen Tempo und reduziert zudem den manuellen Prüfungsaufwand auf ein Minimum. Diese Arbeit untersucht die Möglichkeit einer Automatisierung von Akzeptanztests im Rahmen der Webentwicklung in einem agilen Umfeld. Anhand eines Anwendungsbeispiels wird dargestellt, wie mithilfe der Werkzeuge Cucumber und Selenium ein erster Ansatz zur Testautomatisierung umgesetzt werden kann. KW - Softwaretest KW - Webentwicklung KW - Automatisches Prüfen KW - Agile Softwareentwicklung KW - Testautomatisierung KW - Scrum KW - Akzeptanztest KW - Selenium KW - Cucumber KW - SpecFlow KW - Behavior Driven Development Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1885 IS - 8 SP - 37 EP - 45 PB - AKWI ER - TY - JOUR A1 - Galardo, Enrico Antonio A1 - Herrmann, Frank A1 - Scheubeck, Fabian T1 - Aufbau eines Templates zur Definition von Layout und Report-Anforderungen an einen internationalen ERP-Rollout BT - am Beispiel eines Shared Service Center Projekts der Krones Gruppe JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Im Rahmen des Asian-Pacific-Shared-Service-(APSS)-Projekts der Krones Gruppe soll der Standort Thailand bis 2020 als ein Shared Service Center (SSC) etabliert werden und zentrale Back-Office Aufgaben für sechs neue Service- und Vertriebsniederlassungen im Raums Asien-Pazifik (APAC) übernehmen. Um das Konzept eines SSCs technisch umzusetzen, sollen voneinander unabhängige ERP-Systeme für jede einzelne der neu gegründeten Niederlassungen implementiert werden. Bisher basierte der Inhalt solcher ERP Rollout-Projekte für Tochtergesellschaften der Krones AG auf keinerlei Standard. Deshalb sollte durch die Schaffung eines softwaregestützten Templates zur Definition von Layout und Report Anforderungen die Implementierung internationaler ERP-Systeme nicht nur vereinfacht werden, sondern ebenfalls ein Standardfragenkatalog zur Abwicklung solcher Projekte innerhalb des Krones Konzerns eingeführt werden. Davon erhoffte man sich eine beschleunigte Implementierung der weiteren ERP-Systeme für das APSS-Projekt. KW - Enterprise-Resource-Planning KW - Dienstleistungszentrum KW - Implementation KW - Shared Service KW - Business One KW - Template KW - ERP Rollout KW - SharePoint Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1907 UR - https://akwi.hswlu.ch/article/view/3235 IS - 9 SP - 1 EP - 11 PB - AKWI ER - TY - JOUR A1 - Schütz, Michael Maximilian A1 - Herrmann, Frank T1 - Aufbau eines Konzeptes zur Erkennung von unterschiedlichen Leistungen von verschiedenen Teilnehmern im Auslieferprozess durch die Analyse des Reklamationsverhaltens JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Im vorliegenden Artikel wird ein Konzept zur Erkennung von Problematiken vorgestellt, welches bei einem führenden Automobilproduzenten umgesetzt wurde. Mit Hilfe dieses Konzeptes, werden Auffälligkeiten anhand der Reklamationsquote bei Standorten, Touren, Händlern und Materialnummern aufgedeckt. Das übergeordnete Ziel, das mit einer effizienten Ursachenanalyse erreicht werden soll, besteht in der langfristigen Senkung der Reklamationsquote. Basis dieses Konzeptes bilden dabei die Reklamationen der einzelnen Händler. Anhand von statistischen Methoden wird eine Grundlage geschaffen, um die Ursachen und Auffälligkeiten der jeweiligen Akteure zu ermitteln. Dabei wird auch die Struktur der Auslieferung näher betrachtet, um Standorte, Touren und Händler zu identifizieren, die bei gleichen Auslieferbedingungen unterschiedliche Werte aufweisen.In den folgenden Ausführungen wird eine Methodik erläutert, die eine Abbildung der „normalen“ Reklamationsquote ermöglicht und gleichzeitig Fahrgebiete, Touren und Händler kennzeichnet, die von dieser Reklamationsquote „auffällig“ abweichen. Des Weiteren wird ein Konzept vorgestellt, welches Materialnummern, die plötzlich häufig reklamiert werden und in diesem Sinn auffällig sind, identifizieren kann. Bei dem Automobilproduzenten wurde durch beide aufgezeigt, wo die Ursachenanalyse am effektivsten anzusetzen ist, um damit eine konstante Senkung der Reklamationsquote und eine Steigerung der Kundenzufriedenheit zu erreichen. KW - Reklamation KW - Distribution KW - Statistik KW - Reklamationsmanagement KW - Distributionsstruktur KW - Ausreißer-Erkennung KW - Analyse-Tool Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1935 IS - 5 SP - 24 EP - 31 PB - AKWI ER - TY - CHAP A1 - Selmair, Maximilian A1 - Hanfeld, Marc A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Exploring Opportunities BT - Optimizing Production Planning by Factoring in Energy Procurement and Trading Options T2 - Simulation Notes Europe (SNE), Special Issue: Simulation in Production and Logistics: Impact of Energetic Factors N2 - Motivated by the increasing share of renewable energy in the markets for energy commodities, this study has evaluated the potential for optimizing production planning by taking into account disposable options for procuring energy, in this case electricity. For this purpose, a material flow simulation study extended by an electricity price simulation has been executed to examine possible cost scenarios. Our findings support the notion of a potential for further research in new optimization models involving energy procurement as well as energy trading options KW - Materialflussplanung KW - Energiebedarf KW - Optimierung KW - Simulation Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2007 VL - 27 IS - 2 SP - 97 EP - 103 ER - TY - INPR A1 - Bock, Sebastian A1 - Weiß, Martin Georg T1 - Local Convergence of Adaptive Gradient Descent Optimizers N2 - Adaptive Moment Estimation (ADAM) is a very popular training algorithm for deep neural networks and belongs to the family of adaptive gradient descent optimizers. However to the best of the authors knowledge no complete convergence analysis exists for ADAM. The contribution of this paper is a method for the local convergence analysis in batch mode for a deterministic fixed training set, which gives necessary conditions for the hyperparameters of the ADAM algorithm. Due to the local nature of the arguments the objective function can be non-convex but must be at least twice continuously differentiable. Then we apply this procedure to other adaptive gradient descent algorithms and show for most of them local convergence with hyperparameter bounds. KW - ADAM Optimizer KW - Convergence KW - momentum method KW - dynamical system KW - fixed point Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7546 ER - TY - CHAP A1 - Wulf, Frederik A1 - Lindner, Tobias A1 - Strahringer, Susanne A1 - Westner, Markus T1 - IaaS, PaaS, or SaaS? The Why of Cloud Computing Delivery Model Selection BT - Vignettes on the Post-Adoption of Cloud Computing T2 - Proceedings of the 54th Hawaii International Conference on System Sciences, 2021 N2 - Most large-scale organizations adopted Cloud Computing (CC) on a company level in recent years. Managers now face the challenge to appropriately implement CC "operationally", i.e., for information systems (ISs). We refer to this as post-adoption, addressing the extent of technology usage after adoption. Specifically, managers need to choose among the CC delivery models Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS), and Software-asa-Service (SaaS). We differentiate the determinants of this post-adoption decision for IaaS, PaaS, and SaaS. Based on this analysis, we derive criteria that guide managers' delivery model selection: Adopt 1) IaaS for ISs requiring flexibility and reduced time to market, 2) PaaS to access specialized resources, and 3) SaaS to focus on core competencies. Moreover, we analyze the impact on the CC strategy and postulate them as recommendations: I) acknowledge the interplay between governance and time-to-market, II) realize cost savings on company level, and III) consider strategically important ISs for CC. KW - Cloud Computing KW - IT Sourcing Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7913 UR - https://aisel.aisnet.org/hicss-54/os/practice-based_research/5/ SN - 978-0-9981331-4-0 SP - 6285 EP - 6294 ER - TY - INPR A1 - Bock, Sebastian A1 - Weiß, Martin Georg T1 - Rotation Detection of Components with Convolutional Neural Networks N2 - The main issues in many image processing applications are object recognition and detection of objects, which answers the questions whether an object is present and if it is present, where it is located. Popular object detection algorithms like YOLO use a regression formulation for the whole problem, especially for the bounding box parameters. In production industry the setting usually is different: One usually knows the object type and rather wants to know with high precision where the object is. We study a prototype application in this area where we identify the rotation of an object in a plane. To solve this problem use a regression approach with a CNN architecture as a function approximator. We compare our results to standard image processing algorithms, which do not use neural networks, and present quantitative results on the accuracy. CNNs seem at least competitive to classical image processing. KW - Neural networks KW - Network Architecture KW - CNN KW - Functionapproximation KW - Image orientation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-4120 ER - TY - CHAP A1 - Schwertsik, Andreas A1 - Westner, Markus T1 - Produktorientierte IT-Leistungsverrechnung als Brückenschlag zwischen IT-Leistungserstellung und -verwendung BT - Fallstudie anhand eines international führenden Industriegüterunternehmens T2 - Prozesse, Technologie, Anwendungen, Systeme und Management : Tagungsband zur 27. AKWI-Fachtagung vom 07. bis 10.09.2014 an der Oberbayerischen Technischen Hochschule Regensburg / hrsg. von Thomas Barton N2 - Das vorliegende Paper untersucht anhand einer Fallstudie die Implementierung einer produktorientierten Leistungsverrechnung für IT-Services im Kontext eines international führenden Industriegüterunternehmens. Zunächst werden die ökonomischen und regulatorischen Anforderungen, die zur Ein-führung des Systems geführt haben, skizziert. Danach wird der Aufbau und Ablauf des Verrechnungsverfahrens geschildert: auf IT-Leistungserstellungs-seite werden die angefallenen Kosten über die Bildung sogenannter modularer „Service-Bausteine“ den organisatorisch verantwortlichen Stellen als auch IT-Services zugeordnet. Auf Basis der geplanten Nachfragemenge werden diese IT-Services bepreist und in einem IT-Servicekatalog verzeichnet. Dort können sie von den Fachbereichen nachgefragt werden. Im Sinne von Vorteilen werden u.a. eine verursachungsgerechte Kostenverteilung ermöglicht, Kostentransparenz und -vergleichbarkeit geschaffen sowie das Kostenbewusstsein bei Leistungsempfängern und -erstellern gefördert. Als Nachteil erweist sich der administrative Aufwand zur Durchführung der Kalkulation und in der Folge eine gewisse Statik des Systems, da unterjährige Änderungen nur unter Inkaufnahme von Zusatzaufwand nachgesteuert werden können. KW - IT-Abteilung KW - Innerbetriebliche Leistungsverrechnung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-928 UR - https://www.oth-regensburg.de/fileadmin/media/fakultaeten/im/akwi/AKWI_TAGUNG_2014_Tagungsband.pdf SP - 78 EP - 91 ER - TY - GEN A1 - Mauerer, Wolfgang A1 - Ramsauer, Ralf A1 - Kölbl, Andreas T1 - The Many Approaches to Real-Time and Safety-Critical Linux T2 - Open Source Summit Japan 2017 Y1 - 2017 UR - http://events17.linuxfoundation.org/sites/events/files/slides/talk_10.pdf ER - TY - GEN A1 - Westner, Markus A1 - Fuhrmann, Thomas T1 - Applied Learning through Industry Collaboration BT - The Case of German Universities of Applied Sciences T2 - Applied Learning Conference, 2020, Singapur N2 - Purpose In 1969, Germany founded a new type of tertiary education institution, the so-called “Universities of Applied Sciences” (UAS). In contrast to traditional universities, UAS are supposed to educate their students based on scientific methods but with a high degree of application orientation (Wissenschaftsrat, 2010). The goal was to generate highly employable graduates. Since then the number of UAS in Germany has risen to 216 in 2018/2019 (Statistisches Bundesamt, 2019). ~45% of all German students start their tertiary education at a UAS (Autorengruppe Bildungsberichterstattung, 2018). UAS graduates are well perceived by domestic employers, enjoy high recruiting rates and attractive salary levels. The educational model has proven so successful that its approach and underlying philosophy has been replicated under terms such as “cooperative education” or “applied learning” in a vast number of different countries and educational systems around the globe (Altbach, Reisberg, & Rumbley, 2011). This talk critically describes the key aspects that constitute German UAS’ approaches to industry-oriented applied learning. The findings are relevant for academics, policy makers, and industry representatives to generate ideas on how to improve study curricula, policies, or collaboration between academia and industry. Method The approach taken consists of a descriptive and structured account of the key aspects that constitute the study curricula of a UAS from an applied learning perspective. By building on their own experiences as teaching professors and part of a German UAS’ managerial team, the research method taken resembles an action research-oriented approach. Key Findings German UAS have numerous application-oriented learning elements in their curricula. These elements are performed inside the university like lab courses but many of these learning elements are carried out in cooperation with industry. Bachelor programs span over seven semesters. Fundamentals are taught in the first two semesters and from the third semester on, more and more application-oriented lectures and labs become part of the curricula. In the fifth semester, a mandatory internship is integrated in the study program. This internship is carried out either at companies in Germany or abroad. It is the goal of the internship that the students gain first practical experience in a real work environment. The work tasks in internship should be similar to the later professional demands and should contain a project. The students themselves are responsible for finding an appropriate job and organize the administrative aspects around the internship, thus their self-organization skills are advanced. The UAS teaching staff supervises the internships from an academic perspective. This mandatory internship has numerous advantages: students experience real industry environment and they build contacts to later employers thus forming a potential pathway to future employment. Bachelor and master courses each finish with thesis work. The majority of theses is carried out in companies under university supervision. This is a second chance for the students to accomplish a company project, to gain practical experience and to get in touch with potential employers. In addition to undergraduate and postgraduate education, German UAS do a lot of applied research together with companies. This applied research can also be the basis for the work of Ph.D students. Industry representatives are also involved when designing new study programs as consultants and give advice for accreditation and reaccreditation of programs. All these activities of German universities of applied sciences lead to a high practical relevance of education programs and to a high degree of employability of UAS graduates. KW - Applied Learning KW - UAS KW - Industry collaboration Y1 - 2020 ER - TY - GEN A1 - Westner, Markus A1 - Fuhrmann, Thomas T1 - Entwicklung eines Programms für internationale Gastdozierende als Good Practice Modell für die Hochschulinternationalisierung T2 - Internationalisierung der Curricula in den MINT-Fächern (ICM 2018), Berlin N2 - Der Freistaat Bayern finanziert seit einigen Jahren ein Hochschulprogramm zur Förderung von internationalen Gastprofessorinnen und Gastprofessoren an seinen Hochschulen. Mit diesen Finanzmitteln fördert die OTH Regensburg unter anderem internationale Gastvorlesungen. In der Fakultät Informatik und Mathematik wurde seit 2015 eine Zusammenstellung internationaler Gastvorlesungen entwickelt, die als Wahlpflichtfächer systematisch in ein bestehendes Curriculum integriert sind. So werden den heimischen Studierenden internationale Erfahrungen ermöglicht ("internationalization at home"), die fachliche Breite des Curriculums wird erhöht und es können auf Basis persönlicher Kontakte internationale Hochschulpartnerschaften neu geknüpft und weiter entwickelt werden. Jede Vorlesung in diesem Programm besteht aus mehreren Teilen. Zum Vorlesungsbeginn werden die geplanten Inhalte und Anforderung den Studierenden in einer Videokonferenz erläutert. Die Studierenden erhalten Unterlagen, um sich in Selbstlerneinheiten auf die Präsenzvorlesungen des Gastes vorzubereiten. Im Präsenzteil verbringt die/der Gastdozierende ca. 2 bis 3 Wochen in Regensburg und hält an der Hochschule Blockvorlesungen. So ist es möglich, Veranstaltungen mit 5 ECTS Credits in einem "blended learning" Lehr-/Lernformat durchzuführen. Studierende schätzen das Programm sehr und äußern sich in Evaluationen äußerst positiv über die fachliche und didaktische Erweiterung des Fächerspektrums. Dieses Programm wird als "good practice" innerhalb der Hochschule angesehen und soll in anderen technischen Fakultäten verbreitet werden, u.a. wurde ein "Prozesshandbuch" mit konkreten Beispielen und Handreichungen erstellt. Der Vortrag geht auf diese und weitere Umsetzungsaspekte sowie zugehörige Herausforderungen ein. KW - Hochschule KW - Internationalisierung KW - MINT-Fächer KW - Gastdozent KW - Curriculum KW - Benchmarking Y1 - 2018 ER - TY - GEN A1 - Englberger, Julian A1 - Herrmann, Frank A1 - Claus, Thorsten T1 - A simulation analysis of Independent Requirements Consumption in Master Production Scheduling T2 - ASIM Workshop, Trends in Computational Science and Engineering (ASIM TCSE 2012), February 13-14, 2012, Vienna University of Technology, Austria N2 - This poster presents purpose and function of the Independent Requirements Consumption in Master Production Scheduling and gives recommendations for its application. The approach of hierarchical production planning and its planning problems are explained. The problem of new customer requirements information between planning periods and solving options are shown. The solving option of Independent Requirements Consumption is focus of this poster. The algorithm of the Independent Requirements Consumption that is implemented in commercial Enterprise Resource Planning (ERP) systems like the SAP system is analyzed. The methods for analyzing the effects of the Independent Requirements Consumption are outlined. The scenarios for simulation studies are stated and compared to similar investigations. The simulation studies were performed on a simulation system at IPF that contains both a production planning and control system and a production. The extent of simulation analyses outreaches similar investigations, especially because of the variety of scenarios. For scenarios in which capacity is available to a sufficient extent, advice for setting the Independent Requirements Consumption parameters is given. It is pointed out that with production constrained scenarios, the necessity to level out production leads to problems. An algorithm to determine necessary inventory levels is presented. It is stated that straight advice for Independent Requirements Consumption parameter settings might not be possible with production constrained scenarios. Further analyses with production constrained scenarios as well as investigations concerning safety stocks in combination with Independent Requirements Consumption are current and future research topics at the Innovation Center for Production Logistics and Factory Planning. KW - Produktonsplanung KW - Simulation analysis KW - Independent Requirements Consumption KW - Master Production Scheduling KW - Enterprise-Resource-Planning KW - Kundenorientierung Y1 - 2012 ER - TY - GEN A1 - Bielmeier, Benno A1 - Mauerer, Wolfgang T1 - Semi-Formal Verification of Embedded Linux Systems Using Trace-Based Models T2 - Semi-Formal Verification of Embedded Linux Systems Using Trace-Based Models Y1 - 2023 UR - https://www.lfdr.de/Publications/2022/bielmeier_ossj22.pdf UR - https://www.youtube.com/watch?v=w42ab8-CH1o ER - TY - GEN A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - An Optimization Model for Production Scheduling with Energy Consumption and Energy-related Emissions T2 - OR 2022, International Conference on Operations Research 2022, September 6-9, 2022, Karlsruhe N2 - Due to the scarcity of resources, rising costs as well as the further need for ecological improvement in industrial production, firms are increasingly motivated to take into account energy consumption in production planning. Associated with this, the consideration of energy-related emissions is becoming an additional point of interest for decisionmakers in both, economic and ecological terms. Based on an extensive systematic literature review, the study at hand presents a multicriterial scheduling problem that addresses tardiness, energy consumption and energy-related emissions in production scheduling. A model is introduced that takes into account job release dates, multiple machine states, a power demand threshold as well as time-varying emission conversion factors. Multiple case studies are analysed and the effects of different technological implementations as energy onsite generation and energy storage systems are evaluated. Furthermore, several price mechanisms regarding energy procurement and emission trading are discussed. Moreover, by coupling the optimization model to a discrete event simulation model, we are able to compare the model results to real case scenarios. First computational experiments have demonstrated that the model and its extensions can effectively reduce the environmental impact associated with production while simultaneously considering corresponding economic objectives. Based on the proposed approach, our research aims on answering the question with which economic trade-offs an ecological improvement in terms of energy consumption and emission output can be achieved in production. KW - Optimization KW - Production Scheduling KW - Energy Consumption Y1 - 2022 ER - TY - GEN A1 - Herrmann, Frank A1 - Dilefeld, Maximilian T1 - Improving the scheduling of AGV and AMR using simulation T2 - OR23, International Conference on Operations Research, August 29 to September 1, 2023, Hamburg N2 - Automated Guided Vehicles (AGV) and intelligent Autonomous Mobile Robots (AMR) are an important tool for designing a flexible Industry 4.0 shopfloor. Both types of Mobile Robots are usually deployed with a Fleet Management software to manage (transport) orders and vehicles together with other superordinate control systems. The planning tasks in the superordinate control system used by both AGVs and AMRs can be divided into Material Flow Management, Job Management, Vehicle Dispatching and Job Processing. Requests for supply and removal of material is issued by the stations and has to be combined to transport jobs. Alternatively, more complex system often user external Material Flow Controllers (e.g. MES). Jobs are collected in a queue and their execution order is determined. Vehicles which can execute the next job have to be identified and the best one is selected. Jobs are split into smaller tasks which are sent to the Mobile Robot and executed. For AGVs navigation functions are mostly integrated into the Fleet Manager as part of the Job Processing, while AMRs perform lower-level navigation functions directly on the vehicle and use the superordinate control system for implementing restrictions and traffic control functions. A need for further research and development was identified especially for decision-making algorithms within the Fleet Management. The goal is to compare existing and develop new strategies to solve the different planning problems. For the individual planning tasks different techniques have been discussed and used in research and practice. However, there is no universal best solution and different options must be compared in the context of the specific use case. KW - Simulation KW - Automated Guided Vehicles KW - Autonomous Mobile Robots Y1 - 2023 ER - TY - GEN A1 - Herrmann, Frank A1 - Schoen, Maximilian A1 - Claus, Thorsten A1 - Dai, Chenghao T1 - Aggregate Production Planning under Risk of Disruption T2 - OR 2024, International Conference on Operations Research 2024, September 3-6, 2024, Munich N2 - In recent years, large scale disruptions to global supply chains, like the Covid pandemic, a ship blocking the Suez canal or sanctions against Russia, have caused production to slow down or even to stand still, causing shortages and massive losses for affected businesses. Even if only specific companies were originally affected, shortages and delays rippled along the supply network. The established approach to deal with disruptions is to utilize safety stock and capacity to compensate for fluctuations in uncertain quantities like customer demand. This approach is tried and tested for small fluctuations. To address larger disruptions, like the above given, very high safety stock and capacity would be needed, which would lead to unnecessarily high costs. Resilience has often been viewed as an expensive capability that drives costs. Recent studies however advocate for the development of lean resilience concepts, creating new capabilities, which enable resilience and can deal with large fluctuations, reimagining resilience from the perspectives of efficiency and value creation. This contribution identifies gaps in current research and establishes structural deficits of approaches discussed in the literature regarding supply chains. Firstly, the need for rigorous, quantitative definitions of resilience and relevant disruptions is justified. Then, a stochastic model for aggregate production planning that includes capabilities to compensate for such large fluctuations along several dimensions is proposed. Lastly, this model is then applied to a case study pertaining to a realistic supply chain under the risk of large scale disruptions and the results of this approach are evaluated. KW - Supply Chain Resiliance KW - Aggregate Production Planning KW - Supply Chain Disruption Y1 - 2024 ER - TY - GEN A1 - Paetzel, Maike A1 - Schlesinger, Philipp A1 - Pricop, Mircea A1 - Comaneci, Radu A1 - Baumann, Timo A1 - Menzel, Wolfgang T1 - Inkrementelle und zustandsbasierte Verarbeitung in einem hybriden Sprachdialogsystem BT - Postersession der Sektion Computerlinguistik Y1 - 2013 UR - https://www.researchgate.net/publication/236879516_Inkrementelle_und_zustandsbasierte_Verarbeitung_in_einem_hybriden_Sprachdialogsystem UR - https://www.timobaumann.de/work/uploads/Main/pentomino2013dgfsposter.pdf ER - TY - GEN A1 - Altenbuchner, Amelie A1 - Haug, Sonja A1 - Mohr, Christa A1 - Scorna, Ulrike A1 - Weber, Karsten T1 - The impact of nurse advisors and online advice services on treatment adherence in multiple sclerosis (MS) T2 - 7th Joint European Committee for Treatment and Research in Multiple Sclerosis - Americas Committee for Treatment and Research in Multiple Sclerosis (ECTRIMS-ACTRIMS), 25.-27.10.2017, Paris Y1 - 2017 UR - https://onlinelibrary.ectrims-congress.eu/ectrims/2017/ACTRIMS-ECTRIMS2017/199863/amelie.altenbuchner.the.impact.of.nurse.advisors.and.online.advice.services.on.html ER - TY - GEN A1 - Mohr, Christa A1 - Altenbuchner, Amelie A1 - Haug, Sonja A1 - Scorna, Ulrike A1 - Weber, Karsten T1 - Der Einfluss von pflegerischer Fachberatung und Onlineberatung auf die Therapietreue (Compliance) bei der Behandlung von Multipler Sklerose (MS) BT - eine Längsschnittuntersuchung T2 - Forschungswelten 2018. 9. Internationaler wissenschaftlicher Kongress für Pflege- und Gesundheitsforschung, 19.-20.04.2018, St. Gallen KW - Multiple Sklerose KW - pflegerische Fachberatung KW - Therapietreue KW - Compliance KW - Online-Beratung Y1 - 2018 ER - TY - GEN A1 - Waas, Thomas ED - Ahmet, Yavuz Oral ED - Zehra, Banu Oral ED - Mehmet, Sezer ED - Mehmet, Emre Aköz ED - Seda, Kol ED - Onur, Alp ED - Aksan, Vala ED - Can, Aşkan ED - Gamze, Sekicek T1 - Energy Monitoring and Saving in Medium-Sized Companies T2 - 5th International Congress on Energy Efficiency & Energy Related Materials (ENEFM 2019), Gebze Technical University, Turkey, Book of Abstracts Y1 - 2019 ER - TY - GEN A1 - Haug, Sonja A1 - Weber, Karsten T1 - Soziale Ungleichheit und Wohn‐ und Energiekosten – welche Auswirkungen hat die Energiewende? T2 - Wachsende Ungleichheit - gespaltene Gesellschaft? Aktuelle Beiträge der empirisch-analytischen Soziologie. Erster Kongress der Akademie für Soziologie, 04.04.-06.04.2018, München Y1 - 2018 ER - TY - GEN A1 - Herrmann, Frank ED - Herrmann, Frank ED - Parra, Lorena ED - Popescu, Manuela T1 - Scheduling of a real world filter production with lot-size 1 T2 - SIMUL 2020: The Twelfth International Conference on Advances in System Simulation, 18.-22.10.2020 in Porto, Portugal N2 - In industrial practice, a travelling crane on the ceiling of a factory hall transports products in process from one station to the next one in a production line. Due to space restrictions, there is no buffer between the stations. The production line at Fiedler Andritz, Regensburg in Germany, can be seen as an example of such a problem class. Such restrictions reduce the set of feasible schedules even more than the no-buffer restrictions discussed in the literature in the case of limited storage. Since this scheduling problem is integrated in the usual hierarchical planning, the tardiness is minimised. Due to the high number of jobs as well as the goal of a simple algorithm, scheduling is always done by priority rules at the company site. The standard approach of using the net processing time causes poor results. A simulation of the processing time is suggested. In addition, several very relevant priority rules from the literature are modified by this simulated processing and significantly better results are obtained. Keywords-Simulation of processing time; scheduling, flowshop; no-buffer (blocking); no-wait; priority rules; real world application; filter production Y1 - 2020 UR - https://www.iaria.org/conferences2020/filesSIMUL20/SIMUL_58001.pdf UR - https://www.thinkmind.org/index.php?view=instance&instance=SIMUL+2020 SN - 978-1-61208-831-0 SP - 1 EP - 6 PB - IARIA XPS Press CY - Wilmington, DE, USA ER - TY - GEN A1 - Kratzer, Simon A1 - Strahringer, Susanne A1 - Westner, Markus T1 - Fractional CIOs in SMEs BT - Study Results on an Emerging IT Leadership Model T2 - 2024 2nd International Conference on Management Information Systems (ICMIS 2024), September 28-30, 2024, Tokyo, Japan N2 - To remain competitive, small and medium-sized enterprises (SMEs) need to man-age information technology (IT) effectively. Unlike larger organisations, SMEs often face limited resources and challenges in attracting talent, and typically lack the need for a full-time Chief Information Officer (CIO). In response, a growing number of professionals around the world are offering CIO services on a part-time, shared basis to multiple clients. This model provides SMEs with affordable and flexible access to experienced IT leadership. Known as 'fractional CIOs', these professionals deliver significant value, yet there has been little academic re-search into this phenomenon. Our study, conducted between 2020 and 2023 with 62 Fractional CIOs in 10 countries, aims to fill this gap. It provides a clear defini-tion of fractional CIOs, outlines their engagement models and identifies the key factors that contribute to their success. The findings are intended to enlighten both academics and industry professionals. KW - Fractional CIO KW - Strategic IT Management KW - SME Y1 - 2024 VL - 2 ER - TY - GEN A1 - Renner, Sebastian A1 - Pozzobon, Enrico T1 - SIM SIMulator T2 - IT Security Conference Troopers19, 2019, Heidelberg, Germany N2 - Der Vortrag präsentierte ein Tool, das die Simulation einer SIM-Karte durch einen Standard-Mikrocontroller ermöglicht. Mit diesem Täuschungsmanöver kann die Authentifizierung des 3G-Mobilfunkstandards seitens der SIM-Karte umgangen werden. Tritt zusätzliche Hardware hinzu, die eine 3G-Basisstation vortäuscht, lässt sich eine Man-in-the-Middle-Attacke im 3G-Netz durchführen. In diesem Szenario ist es möglich, die sensiblen Kommunikationsdaten, also den gesamten Datenverkehr beispielsweise zwischen einem Pkw und den Backend-Servern des Herstellers, auszulesen und zu untersuchen. Zudem eignet sich das Tool zum Pentesten von Modems oder SIM- beziehungsweise Smartcard-Applikationen. Der komplette Aufbau des sogenannten SIMulators ist als Open-Source-Software frei verfügbar und auf GitHub abrufbar. Y1 - 2019 UR - https://www.youtube.com/watch?v=FC8UsCy4zVE UR - https://intra.fh-regensburg.de/en/our-university/aktuelles/detail/news/einbruchsicherheit-fuer-die-vernetzte-zukunft.html ER - TY - GEN A1 - Weiss, Nils A1 - Pozzobon, Enrico T1 - IOT Backdoors in Cars T2 - IT Security Conference Troopers19, 2019, Heidelberg, Germany N2 - Connecting cheap IoT devices to the safety-critical network of a car can be an extremely bad idea, but at least it allows us to hack together our own automotive gadget. This talk explains the complete procedure involved in transforming a cheap OBD GSM dongle designed for fleet management into a open source automotive hacking tool. First, the hardware reverse engineering is demonstrated, showing how each component is interconnected and working together. With this knowledge, it was possible to capture the communication of the GSM module and understand the OTA protocol used by this dongle, which can be used to extract the firmware. A quick reverse engineering of the software will show that no cryptographic authentication is used for the OTA updates, and therefore a pirate GSM BTS can be used to obtain remote code execution. After that, a new open source firmware is written for the device, which can easily be extended and controlled remotely with the LUA scripting language. Examples on how hacking this dongle remotely can affect the safety of the driver will be also given. Y1 - 2019 UR - https://troopers.de/troopers19/agenda/mud7fn/ ER - TY - GEN A1 - Weiss, Nils A1 - Pozzobon, Enrico T1 - Automotive Penetration Testing with Scapy T2 - IT Security Conference Troopers19, 2019, Heidelberg, Germany N2 - This talk will provide a general overview on how Scapy can be used for automotive penetration testing. All present features of Scapy for automotive penetration will be introduced and explained. Also an overview of higher level automotive protocols will be given. As automotive penetration testing becomes more important, the lack of free tools for automotive network penetration testing led us to integrate new features in Scapy. Scapy is a well established framework for packet manipulation. The flexibility of Scapy allowed us to implement automotive interfaces (CAN) and automotive protocols (ISOTP, GMLAN, UDS, DoIP, OBD-II). This talk explains the basics of these automotive protocols, the workflow with Scapy for automotive network penetration testing. A live demonstration with some embedded hardware will be given. Y1 - 2019 UR - https://www.youtube.com/watch?v=7D7uNqPWrXw UR - https://troopers.de/downloads/troopers19/TROOPERS19_NGI_RT_Automotive_PenTesting_with_Scapy.zip ER - TY - GEN A1 - Altenbuchner, Amelie A1 - Haug, Sonja A1 - Mohr, Christa A1 - Scorna, Ulrike A1 - Weber, Karsten T1 - Methodenbericht einer Evaluation der Multiprofessionalität in der Behandlung von MS T2 - Forschungswelten 2018. 9. Internationaler wissenschaftlicher Kongress für Pflege- und Gesundheitsforschung, 19.-20.04.2018, St. Gallen Y1 - 2018 UR - https://www.researchgate.net/profile/Julian-Hirt/publication/322701321_RefHunter_-_Manual_zur_Literaturrecherche_in_Fachdatenbanken/links/5adf19dcaca272fdaf8919c7/RefHunter-Manual-zur-Literaturrecherche-in-Fachdatenbanken.pdf ER - TY - GEN A1 - Mauerer, Wolfgang A1 - Wagner, Daniel T1 - Cyclic Tests Unleashed: Large-Scale RT Analysis with Jitterdebugger T2 - Open Source Summit Japan (Tokio) and OSSNA 17.07.2019 Y1 - 2019 UR - https://events19.linuxfoundation.org/wp-content/uploads/2018/07/talk.pdf ER - TY - CHAP A1 - Selgrad, Kai A1 - Lier, Alexander A1 - Köferl, Franz A1 - Stamminger, Marc A1 - Lohmann, Daniel ED - Kästner, Christian ED - Gokhālé, Anirüddhā T1 - Lightweight, Generative Variant Exploration for High-performance Graphics Applications T2 - GPCE'15 : Proceedings of the 2015 ACM SIGPLAN International Conference on Generative Programming: Concepts and Experiences ; October 26-27, 2015, Pittsburgh, PA, USA N2 - Rendering performance is an everlasting goal of computer graphics and significant driver for advances in both, hardware architecture and algorithms. Thereby, it has become possible to apply advanced computer graphics technology even in low-cost embedded appliances, such as car instruments. Yet, to come up with an efficient implementation, developers have to put enormous efforts into hardware/problem-specific tailoring, fine-tuning, and domain exploration, which requires profound expert knowledge. If a good solution has been found, there is a high probability that it does not work as well with other architectures or even the next hardware generation. Generative DSL-based approaches could mitigate these efforts and provide for an efficient exploration of algorithmic variants and hardware-specific tuning ideas. However, in vertically organized industries, such as automotive, suppliers are reluctant to introduce these techniques as they fear loss of control, high introduction costs, and additional constraints imposed by the OEM with respect to software and tool-chain certification. Moreover, suppliers do not want to share their generic solutions with the OEM, but only concrete instances. To this end, we propose a light-weight and incremental approach for meta programming of graphics applications. Our approach relies on an existing formulation of C-like languages that is amenable to meta programming, which we extend to become a lightweight language to combine algorithmic features. Our method provides a concise notation for meta programs and generates easily sharable output in the appropriate C-style target language. KW - exploratory programming KW - general purpose code generation KW - prototyping KW - ray tracin Y1 - 2015 UR - https://selgrad.org/publications/2015_gpce_SLKSL.pdf SN - 978-1-4503-3687-1 SP - 141 EP - 150 PB - ACM CY - New York, USA ER - TY - CHAP A1 - Lier, Alexander A1 - Martinek, Magdalena A1 - Stamminger, Marc A1 - Selgrad, Kai T1 - A High-Resolution Compression Scheme for Ray Tracing Subdivision Surfaces with Displacement T2 - Proceedings of the ACM on Computer Graphics and Interactive Techniques N2 - Subdivision surfaces, especially with displacement, are one of the key modeling primitives used in high-quality rendering environments, such as, e.g., movie production. While their use easily maps to rasterization-based frameworks, they pose a significant challenge for ray tracing environments. This is due to the fact that incoherent access patterns require storing or caching fully tessellated and displaced meshes for efficient intersection computations. In this paper we use a two-tier hierarchy built on a scene's patches. It relies on compressed and quantized bounding volumes on the second tier to reduce the size of the BVH itself. Based on this acceleration structure, we propose a quantized, compact approximation for leaf nodes while being faithful to the underlying patch-geometry. We build on recent advances and present a system that shows competitive performance regarding run-time speed, which is close to full-resolution pre-tessellation methods as well as to previous compression approaches. Ultimately, we provide strong compression of up to a factor of 5: 1 compared to state-of-the-art methods while maintaining high geometrical fidelity surpassing similarly compact approximations and getting close to uncompressed geometry. KW - Displacement Mapping KW - omputing methodologies KW - Parametric curve and surface models KW - Production Rendering KW - ray tracing KW - Subdivision Surfaces Y1 - 2018 U6 - https://doi.org/10.1145/3233308 VL - 1 IS - 2 SP - 1 EP - 17 PB - The Association for Computers in Mathematics and Science Teaching ER - TY - JOUR A1 - Bary, Benedikt von A1 - Westner, Markus A1 - Strahringer, Susanne T1 - How decision maker's personal preferences influence the decision to backsource IT services JF - Journal of Information Technology Management (JITM) N2 - To prepare their IT landscape for future business challenges, companies are changing their IT sourcing arrangements by using selective sourcing approaches as well as multi-sourcing with more but smaller sourcing contracts. Companies therefore have to reconsider and re-evaluate their IT sourcing setup more frequently. Collecting data from 251 global experts, we empirically tested the effect of service quality, relationship quality, and switching costs on IT sourcing decisions using partial least squares (PLS) analysis. Drawing on previously conducted expert interviews, our model extends previous studies and introduces a decision maker’s sourcing preferences as a not yet examined moderator on IT sourcing decisions. This allows us to investigate the influence of the decision maker’s beliefs on the decision process. We were able to confirm the negative effect of switching costs on a decision in favor of backsourcing, however we could not find significant support for the remaining hypotheses. We further discuss potential reasons for our findings and suggest future research opportunities based on our contribution. KW - Outsourcing KW - Backsourcing KW - back-in-house KW - information technology KW - partial least squares Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-233 UR - https://jitm.ubalt.edu/XXX-3/article1.pdf VL - 30 IS - 3 SP - 1 EP - 22 ER - TY - JOUR A1 - Haug, Sonja A1 - Schnell, Rainer A1 - Scharf, Anna A1 - Altenbuchner, Amelie A1 - Weber, Karsten T1 - Bereitschaft zur Impfung mit einem COVID-19-Vakzin - Risikoeinschätzung, Impferfahrungen und Einstellung zu Behandlungsverfahren JF - Prävention und Gesundheitsförderung N2 - Hintergrund Impfungen stellen eine bedeutende Präventionsmaßnahme dar. Grundlegend für die Eindämmung der Coronapandemie mittels Durchimpfung der Gesellschaft ist eine ausgeprägte Impfbereitschaft. Ziel der Arbeit Die Impfbereitschaft mit einem COVID‑19-Vakzin (Impfstoff gegen das Coronavirus) und deren Einflussfaktoren werden anhand einer Zufallsstichprobe der Gesamtbevölkerung in Deutschland untersucht. Material und Methoden Die Studie basiert auf einer telefonischen Zufallsstichprobe und berücksichtigt ältere und vorerkrankte Personen ihrem Bevölkerungsanteil entsprechend. Die Ein-Themen-Bevölkerungsbefragung zur Impfbereitschaft (n = 2014) wurde im November/Dezember 2020 durchgeführt. Ergebnisse Die Impfbereitschaft in der Stichprobe liegt bei rund 67 %. Vorerfahrungen mit Impfungen moderieren die Impfbereitschaft. Sie steigt bei Zugehörigkeit zu einer Risikogruppe. Der Glaube an die Wirksamkeit alternativer Heilmethoden und Befürwortung alternativer Behandlungsverfahren geht mit geringerer Impfbereitschaft einher. Ältere Menschen sind impfbereiter, kovariierend mit ihrer Einschätzung höherer Gefährdung bei Erkrankung. Ebenso ist die Ablehnung einer Impfung mit der Überschätzung von Nebenwirkungen assoziiert. Schlussfolgerung Die Impfbereitschaft hängt mit Impferfahrungen und Einstellungen zu Gesundheitsbehandlungsverfahren allgemein zusammen. Die Überschätzung der Häufigkeit ernsthafter Nebenwirkungen bei Impfungen weist auf weit verbreitete Fehlinformationen hin. T2 - Willingness to be vaccinated with a COVID‑19 vaccine—risk assessment, vaccination experiences and towards treatment procedures KW - Coronavirus-Impfung KW - Risikogruppe KW - Impfnebenwirkungen KW - Einstellung zu Medizin KW - Arztbesuche Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-154 N1 - Corresponding Author: Sonja Haug VL - 17 IS - 4 SP - 537 EP - 544 PB - Springer Nature ER - TY - JOUR A1 - Altenbuchner, Amelie A1 - Haug, Sonja A1 - Schnell, Rainer A1 - Scharf, Anna A1 - Weber, Karsten T1 - Impfbereitschaft von Eltern mit einem COVID-19-Vakzin BT - Die Rolle von Elternschaft und Geschlecht JF - Pädiatrie & Pädologie. Österreichische Zeitschrift für Kinder- & Jugendheilkunde N2 - Hintergrund: Eltern stehen im Rahmen der eigenen Impfung und der Kinderimpfung mit einem COVID-19-Vakzin vor einer Impfentscheidung. Zum aktuellen Zeitpunkt gibt es keine (vollständige) Impfempfehlung. Fragestellung: Die Studie untersucht die Impfbereitschaft von Eltern minderjähriger Kinder und Personen ohne minderjährige Kinder, wobei insbesondere Geschlechtsunterschiede überprüft werden. Methoden: Die Studie basiert auf einer Zufallsstichprobe (Telefon-Survey, n = 2014, Erhebung zwischen 12.11.2020 und 10.12.2020). Die Auswertung stützt sich insbesondere auf die Teilstichprobe von Personen mit minderjährigen Kindern im Haushalt (n = 461). Ergebnisse: Eltern weisen durchgängig eine geringere Impfbereitschaft mit einem COVID-19-Vakzin auf als Befragte ohne minderjährige Kinder (54,1 % vs. 71,1 %). Väter weisen eine stärker ausgeprägte eigene Impfbereitschaft auf als Mütter. Darüber hinaus sind Männer eher als Frauen bereit, das eigene Kind mit einem COVID-19-Vakzin impfen zu lassen. Schlussfolgerungen: Bei Eltern und insbesondere Müttern ist eine erhebliche Fehleinschätzung von Impfrisiken und häufiger Glaube an Impfverschwörungstheorien zu beobachten. Empfohlen werden anschauliche und leicht verständliche Informationen über die Wirkung und Nebenwirkungen der Impfung mit einem COVID-19-Vakzin durch zuständige Institutionen und Ärzte. T2 - Parentsʼ Willingness to Vaccinate with a COVID-19 Vaccine KW - Nebenwirkungen KW - Impfstoffverschwörungsglaube KW - Einstellung zu Homöopathie KW - Risikokommunikation KW - Impfberatung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-196 N1 - Corresponding Author: Sonja Haug VL - 56 IS - 5 SP - 230 EP - 234 PB - Springer Nature ER - TY - CHAP A1 - Bock, Sebastian A1 - Weiß, Martin Georg T1 - Non-Convergence and Limit Cycles in the Adam Optimizer T2 - Proceedings of the 28th International Conference on Artificial Neural Networks, 2019, Munich, Germany, September 17-19 N2 - One of the most popular training algorithms for deep neural networks is the Adaptive Moment Estimation (Adam) introduced by Kingma and Ba. Despite its success in many applications there is no satisfactory convergence analysis: only local convergence can be shown for batch mode under some restrictions on the hyperparameters, counterexamples exist for incremental mode. Recent results show that for simple quadratic objective functions limit cycles of period 2 exist in batch mode, but only for atypical hyperparameters, and only for the algorithm without bias correction. We extend the convergence analysis to all choices of the hyperparameters for quadratic functions. This finally answers the question of convergence for Adam in batch mode to the negative. We analyze the stability of these limit cycles and relate our analysis to other results where approximate convergence was shown, but under the additional assumption of bounded gradients which does not apply to quadratic functions. The investigation heavily relies on the use of computer algebra due to the complexity of the equations. KW - Adam optimizer KW - Convergence KW - Computer algebra KW - Dynamical system KW - Limit cycle KW - Neuronales Netz KW - Maschinelles Lernen KW - Optimierungsalgorithmus KW - Konvergenz 〈Informationstechnik〉 KW - Computeralgebra Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-490 UR - https://doi.org/10.1007/978-3-030-30484-3_20 SP - 232 EP - 243 ER - TY - CHAP A1 - Strasser, Artur A1 - Westner, Markus T1 - Knowledge Transfer in IS Offshoring BT - Processes, Roles, and Success Factors T2 - Proceedings of the 19th Pacific Asia Conference on Information Systems (PACIS 2015) Singapore, July 5-9 N2 - IS offshoring research regarding knowledge transfer processes, roles involved, as well as influencing factors is characterized by its diverse and heterogeneous nature. Covering the last fifteen years of IS offshoring research, this paper provides a consolidated view of the field of study. It presents a generic knowledge transfer process consisting of four stages and five milestones. These stages are characterized and evaluated according to their relevance for knowledge transfer, the types of knowledge transferred, the main activities and methods for transfer and testing, as well as the goals pursued. Furthermore, we aggregate the diverse literature findings relating to individuals who facilitate knowledge transfer processes into a general role. We label this role “offshore coordinator” and present its core tasks and necessary skills. In addition, we identify and cluster core factors that influence success or failure of knowledge transfer. In summary, our study answers calls to discontinue with empirically derived definitions in favor of theory-based conceptualization of the IS offshoring research field with respect to knowledge transfer processes, roles, and success factors. Future studies can build on these results and examine questions with respect to particular characteristics of knowledge transfer processes and their influencing success and failure factors. KW - Offshoring KW - Knowledge transfer KW - Knowledge management KW - Information systems KW - Betriebliches Informationssystem KW - Offshoring KW - Wissensmanagement Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-835 UR - https://aisel.aisnet.org/cgi/viewcontent.cgi?article=1046&context=pacis2015 SP - 1 EP - 15 ER - TY - JOUR A1 - Loshaj, Albion A1 - Herrmann, Frank T1 - Entwicklung einer systemgestützten Stellplatzorganisation für die Werksversandstellen unter Berücksichtigung von variablen Märkten JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Gestaltung der Distributionsflächen der Werksversandstellen bei der BMW Group resultiert aus unterschiedlichen und meist werksspezifischen Gegebenheiten. Im Zuge eines Referenzprojektes sollen einheitliche Standards und Vorgehensweisen für die Entwicklung einer Stellplatzorganisation untersucht und festgelegt werden. Im Rahmen dieses Projekts wird analysiert, worauf bei einer Lagergestaltung im Allgemeinen zu achten ist und wie diese Kriterien im Falle der Werksversandstellen im Speziellen umgesetzt werden können. Zusätzlich behandelt dieses Projekt auch die computerunterstützte Betrachtung der Lager- bzw. Stellplatzverwaltung. KW - Distributionslogistik KW - Lagerplanung KW - Stellplatzorganisation KW - Stellplatzverwaltung KW - Stellplatzverwaltungssystem Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1848 IS - 6 SP - 53 EP - 65 PB - AKWI ER - TY - JOUR A1 - Weikmann, Benjamin A1 - Laubmeier, Franz A1 - Herrmann, Frank T1 - Erweiterung des Workflow-Moduls des ERP-Systems FactWork um Möglichkeiten zur Benutzerinteraktion JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Durch Workflow-Systeme computergestützt abgewickelte Geschäftsprozesse benötigen neben den Aktivitäten, die sie komplett automatisiert ausführen können, von Zeit zu Zeit Feedback durch einen oder mehrere Benutzer. Dazu muss es geeignete Formen der Kommunikation und Interaktion der Workflow-Engine mit dem Benutzer geben. Der folgende Artikel beschreibt die Erweiterung des bestehenden Workflow-Moduls eines Enterprise Resource Planning (ERP)-Systems, welches um solche Fähigkeiten ergänzt wird. KW - ERP-Systeme KW - Geschäftsprozesse KW - Workflows KW - UI-Design KW - Betriebliches Informationssystem KW - Mensch-Maschine-Kommunikation KW - Faktor Mensch Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1858 IS - 7 SP - 19 EP - 31 PB - AKWI ER - TY - JOUR A1 - Herrmann, Frank T1 - The Smart Factory and Its Risks JF - Systems N2 - In this paper, the risks of a Smart Factory are to be examined and structured in order to be able to evaluate the status of the Smart Factory. This thesis thus serves as an overview of the technical components of a Smart Factory and the associated risks. The study takes a holistic view of the smart factory. The results show that the greatest need for action lies in the technological field. Thus, the topics of standardization, information security, availability of IT infrastructure, availability of fast internet and complex systems were prioritized. The organizational and financial risks, which also play an important role in a Smart Factory transformation, are addressed. KW - Smart Factory KW - Datensicherung KW - Infrastruktur KW - Industry 4.0 KW - Smart Factory KW - Risks Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1793 VL - 6 IS - 4 SP - 1 EP - 15 PB - MDPI ER - TY - JOUR A1 - Herrmann, Frank A1 - Heuberger, Nadine T1 - SAP S/4HANA als Enabler zur Smart Factory der AUDI AG JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die zunehmende Digitalisierung der Fertigung führt zu einer zunehmenden Vernetzung von Maschinen, Werkstücken, Werkzeugen, Transporteinrichtungen usw. mit dem Ziel einer weitgehenden Selbstorganisation. Dies stellt zwangsläufig Anforderungen an die bisher verwendeten IT-Systemen zur Steuerung von Unternehmen. Enterprise Ressource Planning Systeme (ERP-Systeme) sind wegen ihres Einflusses auf Produktionsprozesse davon besonders betroffen. Zugleich sind sie wegen ihrer umfangreichen Unterstützung von anderen Unternehmensbereichen wie Controlling für Unternehmen sehr relevant. Dies führt bei ERP-System-Herstellern wie der SAP SE zu umfangreichen Erweiterungen. Mit diesem Projekt wird untersucht, in wie weit sich die neue Produktgeneration von SAP SE (SAP S/4HANA) als Enabler zur Smart Factory der AUDI AG eignet. KW - Enterprise-Resource-Planning KW - Digitalisierung KW - Industrie 4.0 KW - Smart Factory KW - Industrie 4.0 KW - SAP HANA KW - SAP S/4HANA KW - Smart Factory Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1867 IS - 8 SP - 21 EP - 27 PB - AKWI ER - TY - JOUR A1 - Adam, Tilman Josef A1 - Herrmann, Frank A1 - Haberl, Bernhard T1 - Wirtschaftlichkeitsanalyse der bereichsübergreifenden Personalsteuerung und Einführung eines IT-Tools zur Vermeidung von Über-/ Unterkapazitäten JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Dieses Projekt beschäftigt sich mit der bereichsübergreifenden Personalsteuerung in Form von Leihungen und Verleihungen, einem Teilbereich der monatlichen Personalplanung. Durch diese Thematik entstandene Über-/Unterkapazitäten sollen durch die Einführung eines IT-Tools vermieden werden. Leihungen bzw. Verleihungen dienen dem kurzfristigen Ausgleich von Personalüberdeckungen bzw. Personalunterdeckungen. In der Montage des BMW Werks Regensburg wird üblicherweise auch aus anderen Gründen wie beispielsweise der Hilfe bei dem Anlauf eines neuen Modells geliehen. KW - Personalbedarfsermittlung KW - Computerunterstütztes Verfahren Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1876 SN - 2296-4592 IS - 8 SP - 66 EP - 76 PB - AKWI ER - TY - CHAP A1 - Bock, Sebastian A1 - Weiß, Martin Georg T1 - A Proof of Local Convergence for the Adam Optimizer T2 - Proceedings of the 2019 International Joint Conference on Neural Networks (IJCNN), 2019, Budapest, Hungary, July 14-19 N2 - Adaptive Moment Estimation (Adam) is a very popular training algorithm for deep neural networks, implemented in many machine learning frameworks. To the best of the authors knowledge no complete convergence analysis exists for Adam. The contribution of this paper is a method for the local convergence analysis in batch mode for a deterministic fixed training set, which gives necessary conditions for the hyperparameters of the Adam algorithm. Due to the local nature of the arguments the objective function can be non-convex but must be at least twice continuously differentiable. KW - Non-convex optimization KW - Adam optimizer KW - Convergence KW - Momentum method KW - Dynamical system KW - Fixed point KW - Neuronales Netz KW - Maschinelles Lernen KW - Optimierungsalgorithmus KW - Konvergenz 〈Informationstechnik〉 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-501 UR - https://doi.org/10.1109/IJCNN.2019.8852239 VL - 2019 SP - 1 EP - 8 ER - TY - JOUR A1 - Könning, Michael A1 - Strahringer, Susanne A1 - Westner, Markus T1 - Unraveling the impact of cultural distance on IT outsourcing success BT - Insights from three major sourcing reconfigurations JF - Journal of Enterprise Information Management N2 - PURPOSE IT outsourcing (ITO) has developed into an established practice for organizations but the interorganizational and oftentimes international collaboration it involves comes at a price: Reports from academia and practice suggest that more than 25% of all ITO projects fail, many because of cultural differences between client and provider organizations. Against this background, this paper analyzes the complex nature of cultural distance and its multi-faceted effect on ITO success. DESIGN/METHODOLOGY/APPROACH This paper builds upon extant literature on culture on the national, organizational and team level, conceptualizes its effect on relationship quality and ITO success, and hypothesizes a model on potential moderators and management techniques to offset culture-induced challenges. It then evaluates and refines the model by means of an interpretive qualitative research design for an in-depth single-case study of ProSiebenSat.1 Media SE (P7S1), a leading European media company that reconfigured its IT sourcing model three times in 10 years. FINDINGS The results from interviews with top managers from client and provider organizations represent one of the first integrated views on the critical importance of cultural compatibility on multiple levels, provide manifold examples for its complex effect on ITO success, as well as moderators and potential management techniques to promote ITO success. RESEARCH LIMITATIONS/IMPLICATIONS This paper contributes relevant empirical insights to the growing body of literature on culture and its underestimated role in ITO success. It builds on tentative theory that is confirmed and refined. PRACTICAL IMPLICATIONS The paper helps in substantiating the complex and intangible nature of culture and demonstrates means for its effective management. ORIGINALITY/VALUE The results from interviews with top managers from client and provider organizations represent one of the first integrated views on the critical importance of cultural compatibility on multiple levels, provide manifold examples for its complex effect on ITO success, as well as moderators and potential management techniques to promote ITO success. KW - IT outsourcing KW - Offshoring KW - ITO Success KW - Cultural distance KW - Relationship quality KW - National culture KW - Organizational culture Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-8708 VL - 34 IS - 3 SP - 811 EP - 837 PB - Emerald ER - TY - JOUR A1 - Altenbuchner, Amelie A1 - Haug, Sonja A1 - Weber, Karsten T1 - Die ersten Schritte nach einer hüftnahen Fraktur BT - Sensorbasierte Bewegungsexploration bei geriatrischen Traumapatient/-innen JF - Zeitschrift für Gerontologie und Geriatrie N2 - Nach einer Fraktur ist Mobilisierung Behandlungsziel und Therapiesäule. Das Festlegen von Outcomes basiert jedoch auf vielen Unsicherheiten, da Assessments nicht für alle Patient/-innen geeignet sind. Sie können agesabhängig beeinflusst und subjektiv geprägt sein. Sensorbasiertes Bewegungsmonitoring bietet eine Ergänzung zur Operationalisierung der Gehfähigkeit. Für Längsschnittuntersuchungen, die auch im häuslichen Umfeld durchgeführt werden, eignet sich die tägliche Schrittzahl als Variable. Sie kann durch einen handelsüblichen Fitnesstracker beobachtet werden. T2 - The first steps after a proximal femoral fracture: Sensor-based mobility exploration in geriatric trauma patients KW - Schrittzahlen KW - Rehabilitation KW - Mobilität KW - Motion-Tracker KW - Alterstraumatologie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-14251 SN - 0948-6704 N1 - Corresponding author: Amelie Altenbuchner VL - 54 SP - 555 EP - 560 PB - Springer Nature ER - TY - RPRT A1 - Andratschke, Christin A1 - Ceullo, Laura A1 - Dawoud, Belal A1 - Draeger, Susan A1 - Gerdes, Thorsten A1 - Giebisch, Matthias A1 - Grießhammer, Peter A1 - Haas, Katharina A1 - Haug, Sonja A1 - Helling, Dominik A1 - Kominis, Lena A1 - Lang, Christian A1 - Malz, Sebastian A1 - Melzl, Johannes A1 - Michlbauer, David A1 - Mühlberger, Thomas A1 - Nagl, Klaus A1 - Preis, Michael A1 - Rechenauer, Christian A1 - Riederer, Michael A1 - Rückerl, Alexander A1 - Saller, Tobias A1 - Schnabl, Andreas A1 - Stadler, Michael A1 - Steffens, Oliver A1 - Steininger, Peter A1 - Stelzl, André A1 - Toutouly, Lovis A1 - Trauner, Matthias A1 - Vetter, Miriam A1 - Walbrunn, Johannes A1 - Weber, Karsten A1 - Zielbauer, Lukas ED - Steffens, Oliver T1 - MAGGIE: Energetische Modernisierung des genossenschaftlichen Wohnquartiers Margaretenau in Regensburg BT - Musterlösungen für solaroptimiertes Wohnen mit innovativen solaraktiven Baustoffen und einem KI-gestützten Energiemanagement für eine netzdienliche, emissionsarme Strom- und Wärmelogistik; Ergebnisbericht N2 - Im Projekt MAGGIE wurden für das genossenschaftliche historische Stadtquartier „Margaretenau“ in Regensburg Musterlösungen für energieoptimiertes Wohnen mit innovativen Wandaufbauten aus solaraktiven Baukonstruktionen und einer vorhersagebasierten Versorgungstechnologie erforscht. Dazu wurde ein bestehendes Wohngebäude als Demonstrations- und Versuchsobjekt mit einem neuartigen, besonders effizienten Hybridsystem aus Wärmepumpentechnologie und Kraft- Wärme-Kopplung ausgestattet und untersucht, ergänzt durch eine dynamische Wärmelogistik zur Verringerung von Verteilungsverlusten. Das System wurde durch ein neu entwickeltes, allgemein einsetzbares Planungs-, Optimierungs- und Steuerungstool ausgelegt und im Betrieb geregelt. Die in Echtzeit laufende Nachoptimierung des Systems während des Betriebs greift dabei auf reale Monitoringdaten zu. Die Einbindung von Nutzerbedarfsprofilen, Strombörse und Wetterdaten in die Steuerung gestattet einen dynamischen und perspektivischen Anlagenbetrieb zur Maximierung der Solar- und Umweltwärme-Anteile der Energieversorgung und leistet damit einen wirksamen Beitrag zu einem emissionsarmen, klimafreundlichen Gebäudebetrieb. Für die denkmalgerechte Modernisierung der historischen Fassaden wurde ein solaraktives und solaradaptives Außenputzsystem entwickelt und in der Realität getestet. Am Bestandsgebäude kam anstelle eines Wärmedämmverbundsystems ein innovativer Dämmputz mit Mikrohohlglaskugeln zum Einsatz. Die Skalierbarkeit erlaubt eine abschnittsweise Modernisierung des gesamten Ensembles über mehrere Jahre. Durch die hohe Energieeffizienz wird die Warmmiete für die Bewohner der genossenschaftlichen Siedlung durch die Modernisierungsmaßnahmen nicht erhöht, so dass auch nach der Modernisierung ein bezahlbares Wohnen sichergestellt wird. KW - Altbaumodernisierung KW - Energieeinsparung KW - Energiebewusstes Bauen KW - Haus Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-59011 SN - 978-3-96256-100-0 N1 - Gefördert durch einen Beschluss des Bundestages durch das Bundesministerium für Wirtschaft und Klimaschutz (BMWK); Projektlaufzeit Oktober 2017 bis Juni 2022; Förderkennzeichen 03SBE0007A–E CY - Regensburg ER - TY - JOUR A1 - Schönberger, Manuel A1 - Scherzinger, Stefanie A1 - Mauerer, Wolfgang T1 - Ready to Leap (by Co-Design)? Join Order Optimisation on Quantum Hardware JF - Proceedings of the ACM on Management of Data, PACMMOD N2 - The prospect of achieving computational speedups by exploiting quantum phenomena makes the use of quantum processing units (QPUs) attractive for many algorithmic database problems. Query optimisation, which concerns problems that typically need to explore large search spaces, seems like an ideal match for the known quantum algorithms. We present the first quantum implementation of join ordering, which is one of the most investigated and fundamental query optimisation problems, based on a reformulation to quadratic binary unconstrained optimisation problems. We empirically characterise our method on two state-of-the-art approaches (gate-based quantum computing and quantum annealing), and identify speed-ups compared to the best know classical join ordering approaches for input sizes that can be processed with current quantum annealers. However, we also confirm that limits of early-stage technology are quickly reached. Current QPUs are classified as noisy, intermediate scale quantum computers (NISQ), and are restricted by a variety of limitations that reduce their capabilities as compared to ideal future quantum computers, which prevents us from scaling up problem dimensions and reaching practical utility. To overcome these challenges, our formulation accounts for specific QPU properties and limitations, and allows us to trade between achievable solution quality and possible problem size. In contrast to all prior work on quantum computing for query optimisation and database-related challenges, we go beyond currently available QPUs, and explicitly target the scalability limitations: Using insights gained from numerical simulations and our experimental analysis, we identify key criteria for co-designing QPUs to improve their usefulness for join ordering, and show how even relatively minor physical architectural improvements can result in substantial enhancements. Finally, we outline a path towards practical utility of custom-designed QPUs. KW - Hardware KW - Quantum cmputation KW - Informations systems KW - Join algorithms Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-56634 N1 - Corresponding author: Manuel Schönberger VL - 1 IS - 1 SP - 1 EP - 27 PB - ACM CY - New York, NY, ER - TY - JOUR A1 - Käss, Sebastian A1 - Strahringer, Susanne A1 - Westner, Markus T1 - Practitioners’ Perceptions on the Adoption of Low Code Development Platforms JF - IEEE Access N2 - Organizations are under increasing pressure to develop applications within budget and time at high quality. Therefore, multiple organizations adopt Low Code Development Platforms (LCDP) to develop applications faster and cheaper compared to traditional application development. However, current research on LCDP adoption lacks empirical grounding as well as a deeper understanding of the importance of adoption drivers and inhibitors. We conducted semi-structured interviews and a Delphi study with seventeen experts to address these gaps. As a result, we identified twelve drivers and nineteen inhibitors for adopting LCDPs. We show that the experts have a consensus on the most and the least important drivers and inhibitors for LCDP adoption. Yet, the ranking of the drivers and inhibitors between the most and least important is highly context dependent. For some drivers and inhibitors, the experts’ ranking is similar to academic literature, whereas, for others, it differs. In conclusion, the study at hand empirically validates drivers and inhibitors for LCDP adoption, adds six new drivers and six new inhibitors to the body of knowledge, and analyses the importance of these factors. KW - Low code KW - Delphi Study KW - Software Development KW - Inhibitor KW - Driver Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-59170 SN - 2169-3536 N1 - Corresponding author: Markus Westner PB - IEEE ER - TY - CHAP A1 - Baumann, Timo A1 - Paetzel, Maike A1 - Schlesinger, Philipp A1 - Menzel, Wolfgang T1 - Using Affordances to Shape the Interaction in a Hybrid Spoken Dialogue System T2 - Elektronische Sprachsignalverarbeitung 2013 : Tagungsband der 24. Konferenz, Bielefeld, 26. - 28.3.2013 ; [ESSV 2013] N2 - Affordances manifest possibilities of interaction with a spoken dialogsystem. For example, the act of asking a question affords to the recipient thepossibility of answering. In the system we present, the observable act of maneuveringaffords the possibility of controlling a motion. Our system thus uses the affordanceprinciple to shape the interaction: to trigger the usage of instructions that are easyto understand and process, the system gives immediate visual feedback to afforduser commands that can then be reacted upon. This tightening of the interactionloop requires an incremental processing paradigm to allow fast reactions and to beable to alter ongoing system actions. Our system is a hybrid of incremental andnon-incremental processing components, combining conventional, state graph-basedprocessing, which has the advantage of widely available toolkits and well-understooddialog management, with incremental dialog processing which allows for the tightfeedback loop that provides for quick reactions. We tested our approach in a smalluser study and found that users used simpler and setting-independent commandsmore often and were more efficient when faced with the affordance-based version ofour system. Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:18-228-7-1836 UR - https://edoc.sub.uni-hamburg.de//informatik/volltexte/2013/183/ SN - 978-3-94431-03-4 SP - 12 EP - 19 PB - TUDpress ER - TY - BOOK A1 - Baumann, Timo T1 - Incremental Spoken Dialogue Processing: Architecture and Lower-level Components Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:361-25819101 SN - 9783848200221 N1 - Bielefeld, Univ., Diss., 2013 PB - Bielefeld University ER - TY - THES A1 - Großmann, Christoph T1 - Extending SQL for Machine Learning N2 - As machine learning becomes ever more popular, the question of how to enable it on ever more platforms becomes more important. This thesis explores the extension of SQL and extension databases for machine learning. For this purpose, a framework for extending the Exasol database for machine learning is created. This framework uses the existing support for scripting languages and the in-database file system of the Exasol database to integrate existing machine-learning libraries into SQL. Currently, only Scikit-Learn was integrated. The focuses of our framework are simplicity, usability, smooth integration in SQL, and expressive power, while runtime efficiency and speed are only secondary focuses. Further benefits of the framework are reduction of communication overhead, increased data security, simplification of data synchronization, and the usage of core database strengths. Compared to other in-database machine learning approaches, Apache MADlib and Oracle Machine Learning, our framework most likely has inferior speed and efficiency, while having the advantage of using well-integrated and tested libraries. This thesis also provides an overview of related work on extending SQL and databases for machine learning. Furthermore, future directions for our framework are discussed. The created framework is freely available at https://github.com/christoph-grossmann/Exasol_DB_ML_Framework. KW - SQL KW - Machine Learning KW - Database KW - Exasol KW - Maschinelles Lernen KW - SQL KW - Datenbank Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-60595 CY - Regensburg ER - TY - RPRT A1 - Vetter, Miriam A1 - Haug, Sonja A1 - Baumann, Lukas A1 - Dotter, Caroline A1 - Weber, Karsten T1 - EVEKT - Erhöhung der Verbraucherpartizipation an der Energiewende durch KI-Technologien und datenbasierte Mehrwertdienste. 2. Arbeitspapier: Identifikation von Motivatoren BT - Was motiviert Verbraucherinnen und Verbraucher zum Stromsparen? N2 - Viele Länder setzen auf den Einbau digitaler Messtechnologien für Privathaushalte, die als zentraler Bestandteil von Smart-Grids, intelligenter Stromnetze installiert werden, um Stromnetzstabilität zu gewährleisten. Die Messung des Stromverbrauchs kann an die Verbraucher*innen mithilfe von Apps oder anderer Smart-Meter-Plattformen rückgemeldet werden. Dabei zeigt sich, dass nicht nur die Anzeige bzw. die Sichtbarmachung des Stromverbrauchs zu einer möglichen Reduktion des Energieverbrauchs führt, sondern dass die individuelle Ansprache von Haushalten und soziale, finanzielle sowie ideelle Anreize die Haushalte langfristig zur Energiereduktion bewegen. Der Überblick über Motivatoren im Zusammenhang mit einer Energieverbrauchsrückmeldung bietet Hinweise für eine geplante Bevölkerungsbefragung sowie die Entwicklung einer Web-App im Rahmen des Projekts EVEKT. KW - Smart-Meter KW - Verbraucherforschung KW - Stromverbrauch KW - Energie-Feedback KW - Motivatoren Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-60357 ER - TY - RPRT A1 - Haug, Sonja A1 - Dotter, Caroline A1 - Baumann, Lukas A1 - Weber, Karsten T1 - EVEKT - Erhöhung der Verbraucherpartizipation an der Energiewende durch KI-Technologien und datenbasierte Mehrwertdienste. 1. Arbeitspapier: Determinanten des Stromverbrauchs von Privathaushalten im Kontext von Smart Meter N2 - Seit dem Beginn des russischen Angriffskriegs und der Ukraine-Krise im Februar 2022 wurden massive Preissteigerungen auf dem Energiesektor beobachtet. Die Unsicherheiten auf dem Energiemarkt sowie die angespannte Lage der Gasversorgung führten zu erheblich höheren Strompreisen für Privathaushalte. Welche Faktoren den Stromverbrauch determinieren, wird im vorliegenden Arbeitspapier genauer untersucht. Der Zusammenhang zwischen Haushaltsmerkmalen und deren Stromverbrauch ist in der sozialwissenschaftlichen Energieforschung bekannt. Eine Möglichkeit der Verbrauchserfassung von Strom sind Smart-Meter, digitale Stromzähler. Projektziel von EVEKT ist die Untersuchung von Möglichkeiten zur Reduktion des Stromverbrauchs von privaten Haushalten. Ziel dieses Arbeitspapiers ist es, verschiedene Gruppen von Haushalten und deren Charakteristik bei Strombezug und Smart-Meter-Nutzung zu differenzieren. Damit dokumentiert es einen Arbeitsschritt im Rahmen eines EVEKT-Teilprojekts zur Untersuchung sozialer und ethischer Aspekte von KI-Technologie in Privathaushalten. Es wurde ein Scoping Review zu Stromverbrauchsindikatoren in Bezug auf Smart-Meter durchgeführt. In einer systematischen Suche in der Datenbank Web of Science wurden 477 Treffer gefunden. Von den 477 Treffern konnten nach Durchsicht 12 passende Studien analysiert werden. Die untersuchten Arbeiten unterteilen Haushalte in verschiedene Kategorien bzw. Cluster. Einige Studien gruppieren nach soziodemografischen Aspekten, während andere die Verbrauchsmuster analysieren. Als Ergebnis des Scoping Reviews empfehlen wir, beide Ansätze zu kombinieren, um verschiedene Haushaltstypen angemessen anzusprechen. Bedeutung für die weiteren Projektschritte (Bevölkerungsumfrage) Inwieweit die Zugehörigkeit zu bestimmten Haushaltstypen die Akzeptanz von KI-Technologie und feedback-basierter Apps determinieren, wird im Rahmen einer eigenen Befragung überprüft werden. Dazu wird aktuell ein Fragebogen entwickelt. Die Feldphase der deutschlandweiten Bevölkerungsbefragung ist für 2024 geplant. KW - Smart-Meter KW - Partizipation KW - Verbraucher KW - Scoping Review KW - Stromverbrauch Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-60348 ER - TY - RPRT A1 - Vetter, Miriam A1 - Weber, Karsten A1 - Haug, Sonja A1 - Dotter, Caroline T1 - EVEKT - Erhöhung der Verbraucherpartizipation an der Energiewende durch KI-Technologien und datenbasierte Mehrwertdienste. 3. Arbeitspapier: Die Gefahr des Rebound-Effektes BT - Rückkopplungseffekte als Hindernis bei der Smart-Meter-Implementation in Privathaushalten N2 - Politische Energieeffizienzprogramme und gesetzliche Vorgaben fordern einen Emissionsrückgang in Deutschland. Dieser soll auch durch die verstärkte Digitalisierung des Energiesektors erreicht werden. Häufig werden bei Einführung effizienzsteigernder technischer Systeme Rebound-Effekte beobachtet, die Energieeinsparungen verringern. Worin Rebound-Effekte bestehen, wie sie entstehen und wie sie mit Entwicklungen der Stromnutzung in Privathaushalten zusammenhängen, wird in diesem Arbeitspapier behandelt. KW - Rebound-Effekt KW - Spillover-Effekt KW - technische Innovation KW - Smart-Meter KW - Digitalisierung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-60382 ER - TY - GEN ED - Barton, Thomas ED - Erdlenbruch, Burkhard ED - Herrmann, Frank ED - Müller, Christian T1 - Angewandte Forschung in der Wirtschaftsinformatik: Prozesse, Technologien, Anwendungen, Systeme und Management BT - Tagungsband zur 27. AKWI-Fachtagung am 8.9.2014 an der Ostbayerischen Technischen Hochschule Regensburg N2 - Die Wirtschaftsinformatik, die von den Mitgliedern des Arbeitskreises Wirtschaftsinformatik an Fachhochschulen im deutschsprachigen Raum vertreten wird, basiert auf drei Säulen, nämlich der Informatik, der Betriebswirtschaft und der Wirtschaftsinformatik selbst, worunter Systeme zur Steuerung betriebswirtschaftlicher Prozesse verstanden werden – dies entspricht auch der Empfehlung der Gesellschaft für Informatik und liegt den Evaluierungen der Akkreditierungsverfahren zugrunde. Diese Säulen inkludieren fast zwangsläufig eine substantielle Heterogenität an Projekten mit der industriellen Praxis wie auch in der Forschung. Die Einreichungen zur Tagung bestätigten diese Erwartung. Beispiele sind mehrere Arbeiten zur „Datenbank SAP HANA“, zu (allgemeinen) Entwicklungsthemen wie zum „Datenbank-Join“ oder der „Internetsuche“ und zu IT-Systemen wie beispielsweise „Fünf Jahre produktiver Einsatz eines man- dantenfähigen Data-Warehouse-Systems“. Andere Arbeiten befassen sich mit eher technischen Themen wie mobilen (End-)Geräten wie „Plattformunabhängiges, mobiles, integriertes Hochwassermeldesystem für Mittelhessen“ oder „Electronic vs. Mobile Banking“ und der Nutzung von Cloud wie beim „Aufbau einer ‚Private Cloud‘ mit OpenStack“. Mehrere Arbeiten befassen sich mit der IT-Unterstützung logistischer Fragestellungen wie die „Ermittlung von prognoserelevanten Absatzzahlen in der Praxis eines großen Lebensmittelkonzerns“, mit Prozessen wie „Business Process Excellence und der Zusammenhang mit dem Unternehmenserfolg“ sowie mit Management wie „Faktoren für nachhaltigen Unternehmenserfolg“. KW - Wirtschaftsinformatik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2660 PB - Verlag News & Media CY - Berlin ER - TY - GEN ED - Barton, Thomas ED - Erdlenbruch, Burkhard ED - Herrmann, Frank ED - Müller, Christian T1 - Logistische Anwendungen in der Wirtschaftsinformatik BT - Herausforderungen an die Wirtschaftsinformatik; Tagungsband zur AKWI-Fachtagung am 15.9.2010 an der Technische Hochschule Wildau (FH) N2 - Seit jeher zeichnet sich die Wirtschaftsinformatik durch eine große thematische Breite aus, da sie ihre Aufgabe in der Entwicklung und Anwendung von Theorien, Konzepten, Modellen, Methoden und Werkzeugen für die Analyse, Gestaltung und Nutzung von Informationssystemen sieht. Dabei greift die Wirtschaftsinformatik auch auf Ansätze der Betriebswirtschaftslehre sowie der Informatik zurück, die sie erweitert, integriert und um eigene spezifische Ansätze ergänzt. Es freut uns mit diesem Tagungsband Forschungs- und Entwicklungsarbeiten vorstellen zu dürfen, die belegen, dass und wie an Fachhochschulen an dieser Aufgabe der Wirtschaftsinformatik im Rahmen der Logistik gearbeitet wird. Eine grundlegende Aufgabe von Wirtschaftsinformatikern ist die Integration heterogener Softwaresysteme zur Unterstützung von Unternehmensprozessen. Ausgehend von einer Anforderungsspezifikation werden für Unternehmen geeignete Softwaresysteme beschafft. In dem Beitrag „Verknüpfung von Softwarelösungen in einem IT-Logistiknetzwerk“ wird quasi der umgekehrten Aufgabestellung nachgegangen, wie nämlich heterogene Systeme so verknüpft werden können, dass mit ihnen gemeinsam Unternehmensprozesse unterstützt werden können. Während in diesem Beitrag die technische Verknüpfung über eine dedizierte Architektur nicht im Detail vorgestellt wird, ist sie Gegenstand in dem Beitrag „Ein Informationssystem für das RFID-gestützte Behältermanagement“. Konkret handelt es sich um den Architekturstil REST (Representational State Transfer). Prozessverbesserungen lassen sich durch die Nutzung von Simulations- und Optimierungsmodellen erreichen. Typischerweise werden diese als „stand-alone“- Systeme betrieben, und sie erhalten ihre Daten von einem ERP-, PPS- oder allgemein von einem „Decision Support“-System. Dies erfordert eine Schnittstelle. Einen Vorschlag enthält der Beitrag „Konzeption einer Datenschnittstelle für Klassen von Simulations- und Optimierungsmodellen“. Beispiele für die Lösung von Optimierungsproblemen werden in den Beiträgen „Einfuhrzollmanagement – neue Chancen und Herausforderungen für die Standortoptimierung“ und „Gestaltung von Logistiknetzen mit der EDA-Heuristik“ beschrieben. Kern des ersten Beitrags ist die Formulierung eines geeigneten Optimierungsmodells, welches mit einem rechnergestützter Optimierungssystem gelöst wird. Im zweiten Beitrag wird die Lösung von einem sehr anspruchsvollen Optimierungsproblem durch ein heuristisches Verfahren angenähert. Ein wichtiges Themengebiet der Wirtschaftsinformatik ist die Verbindung von Geschäftsprozessmodellierung und Softwareentwicklung. Einen Ansatz dazu beschreibt der Beitrag „Modellgetriebene Softwareentwicklung auf der Grundlage realer Geschäftsprozessoptimierung“. Generell zunehmende Bedeutung in der Wirtschaftsinformatik hat das Wissensmanagement. In dem Beitrag „Konzept, Methoden und offene Fragen für einen Web-Service zur Analyse des Wissensmanagement-Reifegrades in Logistikunternehmen“ wird die Relevanz dieses Themas und sein Umsetzungsgrad bei Logistikunternehmen aus verschiedenen Ländern erläutert, und es wird ein Rahmenkonzept für ein Wissensmanagement in Logistikunternehmen in Form einer webbasierten Infrastruktur dargestellt. KW - Informationstechnik KW - Logistik Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2448 SN - 978-3-936527-24-7 PB - Verlag News & Media CY - Berlin ER - TY - CHAP ED - Fuchs, Gerhard ED - Herrmann, Frank ED - Müller, Christian ED - Wirtz, Klaus Werner T1 - Anwendungen und Techniken zur Analyse großer Datenbestände BT - Tagungsband zur AKWI-Fachtagung am 11. bis 12.09.2008 an der Hochschule Niederrhein ; [Beiträge der Fachtagung "Anwendungen und Techniken zur Analyse Großer Datenbestände" im Rahmen der 21. Jahrestagung des Arbeitskreises Wirtschaftsinformatik an Fachhochschulen (AKWI)] N2 - Mit dem Vorliegen großer Datenbestände steigen natürlich auch die Wünsche und Anforderungen zur Analyse dieser Daten. Aus diesen Gründen widmet sich die AKWI Tagung 2008 mit den hier dokumentierten Beiträgen und Diskussionen diesem Thema unter dem Titel: Herausforderungen an die Wirtschaftsinformatik: Anwendungen und Techniken zur Analyse großer Datenbestände. Mit dem analytischen Customer Relationship Management (CRM) wird von Frick und Iversen das Ziel verfolgt, die Analyse der verfügbaren Informationen für die Kundenbedürfnisse einzusetzen. Das kann beträchtlich die Qualität der Kundenbeziehungen verbessern. Es erfordert aber auch eine Weiterqualifizierung aller Beteiligten. Das Supply Chain Management (SCM) dient zur Unternehmensübergreifenden Betrachtung und Modifikation der Geschäftsprozesse. Die ständige Weiterentwicklung der Geschäftsprozesse in den Unternehmen erfordert auch permanent Anpassung bei den davon in der Supply Chain betroffenen Unternehmen. Die Erweiterung der klassischen Sichtweise der Kostenfunktion im Rahmen der Produktionsplanung um die Einfuhrzollproblematik wird von Szymanski mit einem Ansatz zur Optimierung der Supply Chain mit mathematischen Optimierungsmodellen aufgezeigt. Die Gründe dafür liegen in den immer globaleren Gegebenheiten der Beschaffungs-, Produktions- und Distributionslogistik. Für die umfangreichen Aufgaben im Umgang mit den Enterprise Ressource Planning (ERP) Systemen und deren Implementierung werden heute entsprechende Tools benötigt. Von SAP wird dafür der SAP Solution Manager angeboten. Von Frick und Lankes wird der SAP Solution Manager als ein Projektmanagement Werkzeug eingesetzt. Unternehmen jeder Größenordnung sehen sich zunehmend mit der Herausforderung konfrontiert, die betrieblichen Daten für die unterschiedlichsten Zielsetzungen zur Verfügung zu stellen. Neben den betrieblichen Anforderungen rücken hier aber auch die Änderung der Abgabenordnung (AO) und damit der Datenzugriff durch die Finanzbehörden, die Einhaltung von Compliance Richtlinien und damit das Erkennen von Unterschlagungshandlungen als auch die Bestätigung der Ordnungsmäßigkeit des Jahresabschlusses durch die Wirtschaftsprüfer immer stärker in den Fokus der digitalen Aufbereitung von Unternehmensdaten. Wirtschaftsprüfer, Interne Revisoren und Betriebsprüfer der Finanzverwaltung haben die gleichen Probleme zu bewältigen, indem sie sich mit einer gewachsenen, heterogenen und durch Firmenzukäufe und Ausgliederungen stetig ändernden IT Infrastruktur auseinander zu setzen haben. Von Herde wird ein Ansatz zur Extraktion betrieblicher Massendaten in ein analysefähiges Format, unabhängig von operativen Systemen, kostengünstig realisiert. Der Umgang mit großen Mengen von Daten, auch aus unterschiedlichen Unternehmensbereichen, einer großen Anzahl von Benutzern erfordert heute ein Data Warehouse mit konsolidierten Daten. Ohne eine ausreichende Konsolidierung, d. h. ohne eine einheitliche Darstellung der Daten, kann keine sinnvolle Auswertung erfolgen. Erst mit einem Data Warehouse können die Mitarbeiter auch erkennen, was das Unternehmen zu speziellen Fragen eigentlich alles weiß. Von Stegemerten wird aufgezeigt, wie aus einer bestehenden Unternehmensstrategie eine Strategie zum Aufbau eines Data Warehouses abgeleitet werden kann und eine Organisationsstruktur beschrieben, die diese Umsetzung gewährleistet. Die Bedeutung des Controllings wird in dem Beitrag von Frank Weymerich mit der Entwicklung eines entsprechenden Cockpits deutlich. Hier werden die für das Controlling nützlichen Informationen in einem individuell bedienbaren Cockpit für die betrieblichen Entscheider sinnvoll zusammengestellt. In allen Beiträgen werden unterschiedliche spezielle Aspekte der Analyse und Organisation großer Datenbestände aus der Sicht der Wirtschaftsinformatik mit dem ihr eigenen Blick auf die Gesamtheit aller Einflussgrößen aufgezeigt. KW - Controlling KW - Customer Relationship Management KW - Data Warehouse KW - SAP Solution Manager KW - Supply Chain Management KW - Business Computing KW - CRM Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2489 PB - Verlag News & Media CY - Berlin ER - TY - CHAP A1 - Englberger, Julian A1 - Herrmann, Frank A1 - Claus, Thorsten T1 - Simulation-based determination of capacity load factors for master production scheduling T2 - Proceedings of the 15th International Conference on Simulation in Production and Logistics, October 9 - 11, 2013, Paderborn, Germany N2 - This paper deals with the problem of varying capacity load factors in master production scheduling. A simulation system of a production planning and control system and of a production system is described and an approach to compute the capacity loads from the simulation results is developed. This approach is used to measure period-specific capacity load factors for master production scheduling. The measured capacity load factors vary over time and show that the common assumption of the load factors being period-independent is inappropriate. A stochastic programming model to cope with this variation is described. This model is compared to a common linear programming model for master production scheduling in a simulation experiment. The results show that the use of the measured capacity load factor scenarios improves the quality of the estimation of the capacity load factors significantly. KW - PPS KW - Kapazitätsplanung KW - Stochastisches Modell Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2610 SP - 631 EP - 640 ER - TY - CHAP A1 - Herrmann, Frank A1 - Stumvoll, Ulrike T1 - Überwachung und Verbesserung von Losgrößenmodifikatoren eines PPS-Systems im laufenden Betrieb T2 - Proceedings zur 14. ASIM Fachtagung "Simulation in Produktion und Logistik" vom 6. bis 8. Oktober 2010 am Karlsruher Institut für Technologie, Karlsruhe KW - PPS KW - Losgrößenplanung Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2435 SP - 45 EP - 65 ER - TY - CHAP A1 - Herrmann, Frank A1 - Burgmayr, Georg T1 - Verknüpfung von Softwarelösungen in einem IT-Logistiknetzwerk T2 - Logistische Anwendungen in der Wirtschaftsinformatik. Tagungsband zur AKWI-Fachtagung am 15.9.2010 an der Technische Hochschule Wildau (FH) KW - Logistik KW - Netzwerk KW - Software Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2453 SP - 9 EP - 28 PB - Verlag Vogel Business Media CY - Würzburg ER - TY - GEN ED - Frommeld, Debora ED - Scorna, Ulrike ED - Haug, Sonja ED - Weber, Karsten T1 - Gute Technik für ein gutes Leben im Alter? BT - Akzeptanz, Chancen und Herausforderungen altersgerechter Assistenzsysteme N2 - Längst gibt es altersgerechte digitale Assistenzsysteme. Doch sind Umfang und Geschwindigkeit ihrer Verbreitung sowohl in Pflegeeinrichtungen als auch in privaten Haushalten weitgehend unbekannt. Informationen zu tatsächlich eingesetzten Systemen, realisierten Umsätzen und Marktvolumen sind kaum zu finden. Obwohl es viele Vermutungen hinsichtlich der Hindernisse bei der Einführung altersgerechter Assistenzsysteme gibt, sind auch hier verlässliche Aussagen rar. Die Beiträge des Bandes liefern auf Basis empirischer Untersuchungen und theoretischer Überlegungen Antworten und zeigen auf, wie vielgestaltig die Faktoren sind, die die Diffusion altersgerechter Assistenzsysteme hemmen oder fördern. KW - Alter KW - Altenpflege KW - Assistenzsystem KW - Künstliche Intelligenz KW - Medizintechnik KW - Arbeitshilfe Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-149 SN - 978-3-8376-5469-1 PB - transcript Verlag CY - Bielefeld ER - TY - CHAP ED - Barton, Thomas ED - Erdlenbruch, Burkhard ED - Herrmann, Frank ED - Müller, Christian ED - Marfurt, Konrad ED - Seel, Christian T1 - Angewandte Forschung in der Wirtschaftsinformatik: Prozesse, Technologien, Anwendungen, Systeme und Management BT - Tagungsband zur 28. AKWI-Fachtagung am 7.9.2015 an der Hochschule Luzern N2 - Der Titel unseres Tagungsbands „Prozesse, Technologie, Anwendungen, Systeme und Management 2015“ unterstreicht erneut die fachliche Breite der Beiträge der forschenden Kollegen an Fachhochschulen. Im Rahmen eines zweistufigen Begutachtungsverfahrens – zunächst wurde von den Mitgliedern des Programmkomitees ein Abstract begutachtet und danach der vollständige Beitrag – wurden die vorliegenden 31 Beiträge für die Tagung ausgewählt. Diese hohe Zahl an Beiträgen widerspiegelt den großen Aufwand, den unsere Kollegen zusätzlich zu ihren Lehrdeputaten in die Forschung investieren. Zugleich erforderte sie auf Grund der limitierten Seitenzahl des Tagungsbandes da und dort Kürzungen, welche den Autorinnen und Autoren sicherlich nicht immer leicht fielen. Ungekürzte Versionen der Beiträge können auch jederzeit in unserem online Journal (http://ojs.hslu.ch/index.php/AKWI) eingereicht werden. Wir haben die Beiträge wiederum in drei Tracks angeordnet, welche zugleich die Überschriften der Abschnitte des Tagungsbandes bilden. Der Track „Geschäftsprozesse" hat die Schwerpunkte „Modellierung und Simulation von Geschäftsprozessen" sowie „Referenz-und Reifegradmodelle". Der Track „Management und IT-Systeme" liefert interessante Einblicke u.a. in die Themen Digitalisierung, Akzeptanz von IT-Systemen, agile Methoden, Nutzenanalyse einer In-Memory Datenbank im Umfeld Business Intelligence, Einführung von ERP-Systemen auch in KMU, Datenqualität und modellgetriebene Softwareentwicklung. Cloud-Lösungen von Standardsoftwareherstellern, Mobilität, virtuelle Labore, Private Cloud, Sicherheit und mobile Applikationen sind die Themen im Track „Cloud – Mobile – Security“. Die Reihenfolge der Beiträge innerhalb der Tracks (und damit der Kapitel des Tagungsbandes) folgt keinem speziellen Aufbau, sondern den planungstechnischen Randbedingungen. Zu letzteren gehört auch die Tatsache, dass dieses Jahr erfreulicherweise zum ersten Mal ein Doktorandenkolloquium in die wissenschaftliche Fachtagung integriert werden konnte. Herrn Prof. Dr. Christian Seel sei an dieser Stelle noch einmal ganz herzlich dafür gedankt. Trotz ihrer Kürze weisen alle vorliegenden Beiträge ein hohes Niveau auf und belegen das große Engagement der Kolleginnen und Kollegen, die sich im Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI) zusammengefunden haben. Die Herausgeber danken allen Autorinnen und Autoren für die eingereichten Beiträge und der gastgebenden Hochschule Luzern für die zur Verfügung gestellten Räumlichkeiten im Zentrum von Luzern und die Unterstützung des Drucks unseres Tagungsbandes. KW - Wirtschaftsinformatik Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2068 SN - 978-3-944330-47-1 PB - mana-Buch CY - Heide ER - TY - GEN ED - Barton, Thomas ED - Erdlenbruch, Burkhard ED - Herrmann, Frank ED - Müller, Christian ED - Schuler, Joachim T1 - Management und IT. Tagungsband zur AKWI-Fachtagung vom 16. bis 18.09.2012 an der Hochschule Pforzheim (FH) N2 - Wirtschaftsinformatik befasst sich mit allen Themen, die an der Schnittstelle zwischen Informatik und Betriebswirtschaft anzutreffen sind. So geht es in der Wirtschaftsinformatik – basierend auf dem Wissen und dem Verstehen der betriebswirtschaftlichen Konzepte und Anwendungen – insbesondere darum, IT-Systeme für die betriebliche Praxis zu entwickeln, einzuführen und zu betreiben. Eine wissenschaftliche Fachtagung, die den Titel „Management und IT“ trägt, setzt an einer solchen Beschreibung der Wirtschaftsinformatik an. KW - Wirtschaftsinformatik Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2225 SN - 978-3-936527-30-8 PB - Verlag News & Media CY - Berlin ER - TY - GEN ED - Barton, Thomas ED - Erdlenbruch, Burkhard ED - Guckert, Michael ED - Herrmann, Frank ED - Müller, Christian T1 - Herausforderungen an die Wirtschaftsinformatik: Integration und Konnexion BT - Tagungsband zur 26. AKWI-Fachtagung am 16.9.2013 an der Hochschule Friedberg (FH) N2 - Das aufgerufene Thema „Herausforderungen an die Wirtschaftsinformatik: Integration und Konnexion“ provozierte Beiträge, die thematisch ein sehr breites Spektrum abdecken. Neben theoretischen Betrachtungen und Definitionen des sicher noch nicht final geprägten Begriffs der Konnexion gab es auch sehr praktische Beiträge wie die Darstellung von konkreten prototypischen Entwicklungsvorhaben. Auch das ist ein Indiz für die lebendige Landschaft der Wirtschaftsinformatik an den deutschsprachigen Hochschulen für Angewandte Wissenschaften. KW - Wirtschaftsinformatik Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2165 SN - 978-3-936527-36-0 PB - Verlag News & Media CY - Berlin ER - TY - GEN ED - Barton, Thomas ED - Erdlenbruch, Burkhard ED - Herrmann, Frank ED - Müller, Christian T1 - Betriebliche Anwendungssysteme BT - Tagungsband zur AKWI-Fachtagung am 13.9.2011 an der Fachhochschule Worms (FH) N2 - In heutigen Unternehmen werden im Kern alle Aufgaben durch Anwendungssysteme direkt oder durch diese unterstützt erledigt. Folglich beschreiben betriebliche Anwendungssysteme heute im Grunde, welche Aufgaben in Unternehmen überhaupt zu lösen sind und welche davon automatisiert und somit durch Software erledigt bzw. unterstützt werden können. Die Arbeit an und mit Betrieblichen Anwendungssystemen ist gekennzeichnet durch eine große thematische Breite und demonstriert die für die Wirtschaftsinformatik charakteristische Nutzung von Ansätzen der Betriebswirtschaftslehre sowie der Informatik. Deswegen erwarteten die Herausgeber sehr heterogene Themenvorschläge und sie wurden nicht enttäuscht. Die letztlich ausgewählten Themen stellen aktuelle Entwicklungs- und anwendungsorientierte Forschungsprojekte zu Geschäftsprozessen, Standardsoftware, Softwareentwicklung und Betrieb von Anwendungssystemen vor. Dadurch beschreiben sie das heute existierende Berufsbild von Wirtschaftsinformatikern und -innen in der industriellen Praxis. Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2333 SN - 978-3-936527-26-1 PB - Verlag News & Media CY - Berlin ER - TY - CHAP A1 - Herrmann, Frank T1 - Simulation of the control of exponential smoothing by methods used in industrial practice T2 - Proceedings of the 26th EUROPEAN Conference on Modeling and Simulation, May 29th - June 1st, 2012, Koblenz, Germany N2 - Demands of customers for products and of the production for parts are being forecasted quite often in companies. The results are used extensively within the operational production planning and control by IT Systems like the SAP system. Hereby preferably methods based on exponential smoothing are being applied. Especially, in industrial practice it is expected that the pattern of the data change over time in such a way, that the parameters of the exponential smoothing have to be changed. In some companies thousands of items require forecasting, which is very laborious. With an adaptive method the parameters are modified in a controlled manner, as changes in the pattern occur. Two adaptive methods used in industrial practice are explained. Simulation experiments over a huge number of periods show when they should be used. KW - PPS KW - Nachfrage KW - Prognose KW - Exponentielle Glättung KW - forecast of demands in industrial practice KW - Simulation experiment KW - Enterprise Resource Planning (ERP) system KW - Production Planning and Control (PPS) system, KW - Adaptive method KW - Exponential smoothing Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2262 ER - TY - CHAP A1 - Lange, Frederick A1 - Herrmann, Frank A1 - Claus, Thorsten T1 - Simulation based clearing functions for a model of order release planning T2 - Proceedings of the 27th EUROPEAN Conference on Modeling and Simulation, May 27th - 30th, 2013, Ålesund, Norway N2 - In capacitated production systems at high utilization there exists a nonlinear relationship between the orders which are in process and the output. This nonlinear relationship can be described by nonlinear Clearing Functions. We show how a Clearing function will be estimated and integrate it into a model of order releases planning. We compare our model with two inventory management policies under different demand conditions. KW - clearing function KW - linear programming KW - order release planning KW - simulation KW - Auftragsabwicklung KW - Clearing function Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2205 SP - 741 EP - 747 ER - TY - CHAP A1 - Herrmann, Frank ED - Barton, Thomas ED - Erdlenbruch, Burkhard ED - Herrmann, Frank ED - Müller, Christian ED - Schuler, Joachim T1 - Unterstützung einer selbststeuernden Planung durch eine geeignete Erweiterung des SAP Systems. T2 - Management und IT. Tagungsband zur AKWI-Fachtagung am 16.9.2012 an der Hochschule Pforzheim (FH) KW - Enterprise-Resource-Planning KW - PPS KW - Auftragsabwicklung KW - SAP R/3 Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2231 SP - 65 EP - 76 PB - News & Media CY - Berlin ER - TY - JOUR A1 - Hauser, Christian A1 - Herrmann, Frank T1 - Optimierung der Materialbereitstellung in der Fertigung nach Lean-Methoden in Anlehnung an das Kanban-Prinzip JF - Anwendungen und Konzepte der Wirtschaftsinformatik (AKWI) N2 - Lean Management wurde in den letzten Jahren in den deutschen Produktionsbetrieben immer populärer. Die daraus resultierende Umstrukturierung bringt meist eine höhere Wirtschaftlichkeit, Produktivität und große Einsparpotenziale mit sich. Im Zuge dessen sollen bei der Produktion der Kühlbehälter (IsoTec) der Gebhardt Logistic Solutions GmbH in Cham Potenziale und Maßnahmen aufgedeckt werden, um die Prozesse zu verbessern. Großes Augenmerk liegt dabei, in der Anwendung eines der bekanntesten Methode des Lean Managements, dem Kanban-Prinzip, zur Optimierung der Materialbereitstellung, den Lagerbeständen und den Durchlaufzeiten. Damit verbunden ist die Verkürzung der Lieferzeiten gegenüber dem Kunden. Durch die Nutzung der eigenen Kompetenzen rund um die Transportbehälterfertigung wird die Bereitstellung und der Transport der benötigten Materialien für die Montage neu geplant und umgesetzt. KW - Lean Management KW - Kanban-System KW - Kanban KW - Lean Management KW - Optimierung KW - Wertstrom Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2049 UR - https://ojs-hslu.ch/ojs302/index.php/AKWI/article/view/44 VL - 4 SP - 50 EP - 54 ER - TY - CHAP A1 - Herrmann, Frank T1 - Simulative analysis of the performance in the handling of goods for a small sized highbay warehouse by storage strategies T2 - Grundlagen, Methoden und Anwendungen in Modellbildung und Simulation : ASIM 2011, 21. Symposium Simulationstechnik ; 7. - 9. September 2011, ZHAW, Winterthur, Schweiz ; Abstractband ; [Tagungsband] KW - Hochregallager KW - Lagerplanung Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2355 UR - https://www.asim-gi.org/fileadmin/user_upload_asim/ASIM_Publikationen_OA/AM137/fullpapers/0086.pdf ER - TY - CHAP A1 - Brosig, Christoph A1 - Westner, Markus A1 - Strahringer, Susanne ED - Borštnar, Mirjana Kljajić T1 - Linking IT assets and competitive advantage - IT capabilities of servitized business models T2 - 34th Bled eConference Digital Support from Crisis to Progressive Change: June 27 - 30, 2021, Online: Conference Proceedings N2 - This paper connects research from business model innovation and information systems by exploring critical IT capabilities for servitized business models. The adoption of servitized business models is a major business model innovation strategy. At the same time, digitalization drives the evolution of IT capabilities at these business models. Scholars argue that it remains unclear how IT capabilities enable servitized business models to build a competitive advantage by achieving cost advantages or differentiation. This paper explores IT capabilities that enable building a competitive advantage for servitized business models based on a qualitative analysis of multiple published case studies. The authors identify configurations of IT capabilities among servitized business models. The findings contribute to servitization research by exploring IT capabilities and how they are combined among servitized business models. The insights help practitioners deploy digital technologies and IT assets effectively as building blocks of IT capabilities to advance their servitized business model. KW - resource-based view KW - IT capability KW - digital servitization KW - competitive advantage KW - Geschäftsmodell KW - Innovation KW - Hybrides Leistungsbündel KW - Informationstechnik Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-20158 UR - https://press.um.si/index.php/ump/catalog/book/581 SN - 978-961-286-485-9 SP - 111 EP - 123 ER -