TY - JOUR A1 - Ding, Yining A1 - Kusterle, Wolfgang T1 - Bemessungsmodell für Stahlfaserbeton JF - Beton- und Stahlbetonbau N2 - Die Bemessungsrichtlinien für Stahlfaserbeton folgen je nach Land unterschiedlichen Ansätzen. Generell kann festgehalten werden, daß das Niveau dieser Bemessungsrichtlinien i. d. R. nicht mit den entsprechenden Normen für Stahlbeton vergleichbar ist. Die Richtlinien erreichen oft nur den Stand von Empfehlungen. Da die Bemessungstheorie des Stahlfaserbetons weit hinter der praktischen Anwendung zurückliegt, bedeutet dies in der Praxis, daß der Stahlfaserbeton oft nur für Bauteile, deren Tragfähigkeit als untergeordnet betrachtet wird, zum Einsatz kommt. Eine gute Bemessungsgrundlage für Faserbetone findet sich im DBV-Merkblatt "Bemessungsgrundlagen für Stahlfaserbeton im Tunnelbau". Für die praktische Anwendung ist sie jedoch etwas zu kompliziert. Der Beitrag stellt ein neues Bemessungsmodell vor, das auf den Ergebnissen zahlreicher Biegezugversuche beruht, die für den verwendeten Stahlfasertyp statistisch ausgewertet wurden. KW - Stahlfaserbeton KW - Bemessung KW - Rißbildung KW - Biegezugfestigkeit Y1 - 2000 U6 - https://doi.org/10.1002/best.200000390 SN - 1437-1006 VL - 95 IS - 4 SP - 225 EP - 231 PB - Ernst & Sohn ER - TY - JOUR A1 - Bulenda, Thomas A1 - Knippers, Jan T1 - Stability behaviour of grid shells JF - Computers&Structures N2 - Grid shells exhibit different modes of stability failure. This paper explains some parameters influencing the failure load of domes and barrel vaults and makes suggestions for the imperfection shape which has to be assumed in an analysis. All computations are carried out with a commercial FE-program. KW - Finite Elemente KW - Gitterschalen KW - Nichtlinearität KW - Stabilität Y1 - 2001 U6 - https://doi.org/10.1016/S0045-7949(01)00011-6 VL - 79 IS - 12 SP - 1161 EP - 1174 PB - Elsevier ER - TY - JOUR A1 - Zilch, Konrad A1 - Finckh, Wolfgang A1 - Niedermeier, Roland A1 - Wiens, Udo T1 - DAfStb-Richtlinie: Verstärken von Betonbauteilen mit geklebter Bewehrung – Teil 1: Bemessung und Konstruktion JF - Bauingenieur Y1 - 2011 VL - 86 IS - 5 SP - 197 EP - 206 PB - VDI-Verlag ER - TY - JOUR A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Bauteilspezifische Effekte auf die Verbundkraftübertragung von mit aufgeklebten CFK-Lamellen verstärkten Betonbauteilen JF - Bauingenieur Y1 - 2010 VL - 85 IS - 2 SP - 97 EP - 104 PB - Springer-VDI-Verlag ER - TY - JOUR A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Strengthening and Rehabilitation of Reinforced Concrete Slabs with Carbon-Fiber Reinforced Polymers Using a Refined Bond Model JF - Computer-Aided Civil and Infrastructure Engineering N2 - Slabs are one of the main load-bearing elements in nearly every structure. Because of additional live loads or modifications of the building structure these slabs often have to be strengthened. Using externally bonded carbon-fiber reinforced polymer (CFRP) strips to strengthen existing concrete structures has become common practice. One of the main failure modes is the loss of the composite action between the concrete and the CFRP strip making the bond force transfer very important. This bond force transfer depends on many parameters including the concrete strength, the ratio between shear force, and bending moment. A new parameter recently discovered by the Technische Universität München (TUM) is the deflection of the structural elements themselves. Because of this deflection self-inducted contact pressure occurs. This contact pressure affects a higher bond transfer. The lower effective depth of slabs compared to beams causes higher deflections. In this article, first a few principles on the strengthening with adhesive-bonded CFRP strips and the characteristics of the bond are explained. Then, the basics of the bond force transfer, at the end anchorage and in the rest of the element, are summarized. Based on these essentials, as well as numerous experiments, the change in the bond force transfer at the structural element caused by the curvature is then derived. With these findings, a complete verification concept is presented, which is ideal for computerized calculations. This verification concept is finally compared to several full-scale test results presented in pertinent literature. Y1 - 2012 U6 - https://doi.org/10.1111/j.1467-8667.2011.00752.x VL - 27 IS - 5 SP - 333 EP - 346 PB - Wiley ER - TY - THES A1 - Finckh, Wolfgang T1 - Einfluss bauteilspezifischer Effekte auf die Bemessung von mit CFK-Lamellen verstärkten Stahlbetonbauteilen N2 - Die vorliegende Arbeit beschäftigt sich mit dem Tragverhalten von mit kohlenstofffaserverstärkter Kunststoff Lamellen (CFK-Lamellen) biegeverstärkten Betonbauteilen. Ein wesentlicher Fokus dieser Arbeit liegt dabei auf dem Verbundverhalten aufgeklebter CFK-Lamellen und der damit verbundenen Verbundkraftübertragung am Bauteil. Dazu werden auf Grundlage von zahlreichen eigenen experimentellen Untersuchungen verschiedene bekannte Modelle miteinander kombiniert und um bauteilspezifische Effekte erweitert. Dadurch kann erstmals ein geschlossenes, realitätsnahes sowie vollständig mechanisch begründetes Bemessungsmodell für mit aufgeklebten CFK-Lamellen biegeverstärkte Betonbauteile angegeben werden. Im Rahmen der Arbeit wird gezeigt, dass das so entwickelte Bemessungsmodell das Tragverhalten von zahlreichen Bauteilversuchen an unterschiedlichen statischen Systemen mit unterschiedlichsten Bauteilabmessungen und Bewehrungsführungen gut beschreiben kann. Aufbauend auf dem entwickelten Bemessungsmodell werden mithilfe von Simulationen auf der sicheren Seite liegende vereinfachte Ingenieurmodelle für eine schnelle und einfache Bemessung angegeben. Neben der Verbundkraftübertragung der aufgeklebten CFK-Lamellen, welche erstmals in Abhängigkeit der Bauteilverformungen und der Querkrafteinflüsse beschrieben wird, werden in der Arbeit auch das Querkrafttragverhalten, die Rissbildung sowie die Schnittgrößenumlagerung von mit aufgeklebten und in Schlitze ver- klebten CFK-Lamellen verstärkten Betonbauteilen betrachtet. Somit steht mit dieser Arbeit ein vollständiges Bemessungskonzept für mit CFK-Lamellen biegeverstärkten Betonbauteilen unter statischer Belastung zur Verfügung. Y1 - 2012 UR - https://mediatum.ub.tum.de/doc/1083989/1083989.pdf N1 - Technische Universität München, Dissertation CY - München ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Verankerung von aufgeklebten Stahllaschen im Bereich von Biegemomenten mit wechselnden Vorzeichen N2 - Bei durchlaufenden verstärkten Stahlbetonkonstruktionen kann es aufgrund der ungünstigen Anordnung der Verkehrslasten im Bereich der Verankerung der aufgeklebten Bewehrung zu einem Vorzeichenwechsel des Momentes bei unterschiedlichen Lastfällen kommen. Dies führt dazu, dass die aufgeklebte Verstärkung in einem bestimmten Bereich sowohl Zug- wie auch Druckkräften ausgesetzt ist. Im Rahmen dieses Forschungsberichtes werden zunächst bisherige Untersuchungen, welche diese Problemstellung tangieren, betrachtet. Darauf aufbauend werden Verbunddruckversuche mit unterschiedlich dicken Stahllaschen durchgeführt, um das Verhalten des Verbundes unter Druckbeanspruchung zu untersuchen. Zur Verifizierung der Versuchsergebnisse sowie zur Erfassung weiterer bauteilspezifischer Effekte werden zwei Versuche an einem Durchlaufträger durchgeführt in welchem die Stahllaschen bis weit in den Druckbereich verankert waren. Aufgrund der durchgeführten experimentellen Untersuchungen werden abschließend Empfehlungen für den Umgang mit dieser Problemstellung in der Bemessung gegeben. Y1 - 2012 SN - 978-3-8167-8821-8 PB - Fraunhofer IRB Verlag CY - Stuttgart ER - TY - BOOK A1 - Fingerloos, Frank A1 - Finckh, Wolfgang A1 - Hochreither, Heinrich A1 - Ignatiadis, Anett A1 - Jenisch, Franz-Michael A1 - Landgraf, Markus A1 - Prietz, Frank A1 - Schmitt, Walter A1 - Schuster, Konrad A1 - Schwabach, Enrico T1 - Verbesserung der Praxistauglichkeit der Baunormen durch pränormative Arbeit - Teilantrag 2: Betonbau Y1 - 2015 UR - https://www.irbnet.de/daten/rswb/15089002957.pdf PB - Fraunhofer IRB Verlag CY - Stuttgart ER - TY - JOUR A1 - Bulenda, Thomas A1 - Winzinger, Thomas T1 - Verfeinerte Berechnung von Gitterschalen JF - Stahlbau N2 - In dieser Arbeit wird eine gegenüber früheren Veröffentlichungen genauere Berechnung von Gitterschalen gezeigt. Dabei werden die Einflüsse einer feineren Diskretisierung der Einzelstäbe, der Seilexzentrizität und der Knotennachgiebigkeit auf Traglast und Tragverhalten der Schalen untersucht. T2 - Enhanced computation of grid shells KW - Finite Elemente KW - Gitterschalen KW - Nichtlinearität KW - Stabilität Y1 - 2005 U6 - https://doi.org/10.1002/stab.200490253 VL - 74 IS - 1 SP - 33 EP - 38 PB - Ernst & Sohn, a Wiley brand ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Praxisgerechte Bemessungsansätze für das wirtschaftliche Verstärken von Betonbauteilen mit geklebter Bewehrung BT - Querkrafttragfähigkeit KW - Stahlbetonbauteil KW - Bewehrung KW - Bemessung KW - Verbundverhalten KW - Kohlenstofffaserverstärkter Kunststoff KW - Tragfähigkeit KW - Lamelle Y1 - 2012 SN - 978-3-410-65205-2 PB - Beuth CY - Berlin ER - TY - THES A1 - Bulenda, Thomas T1 - Behandlung nichtlinearer Lösungspfade in der Statik mit Hybriden Krylov-Newton-Verfahren KW - Finite Elemente KW - Kurvenverfolgung KW - Nichtlinearität KW - Schalen KW - Stabilität KW - Strukturmechanik KW - Nichtlineares Phänomen KW - Krylov-Verfahren Y1 - 1993 N1 - Technische Universität München, Dissertation CY - München ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Praxisgerechte Bemessungsansätze für das wirtschaftliche Verstärken von Betonbauteilen mit geklebter Bewehrung BT - Verbundtragfähigkeit unter statischer Belastung Y1 - 2012 SN - 978-3-410-65202-1 PB - Beuth CY - Berlin ER - TY - JOUR A1 - Knippers, Jan A1 - Bulenda, Thomas A1 - Stein, M. T1 - Zum Entwurf und zur Berechnung von Stabschalen JF - Stahlbau KW - Finite Elemente KW - Gitterschalen KW - Nichtlinearität KW - Stabilität Y1 - 1997 VL - 66 IS - 1 SP - 31 EP - 37 ER - TY - JOUR A1 - Keller, Helena A1 - Greim, Markus A1 - Kusterle, Wolfgang T1 - 27th Conference and Workshop on Rheology of Building Materials, Ostbayerische Technische Hochschule (OTH) Regensburg, Germany, March 7 – 8, 2018 BT - Conference report JF - Applied Rheology Y1 - 2018 U6 - https://doi.org/10.1515/arh-2018-0005 VL - 28 IS - 2 SP - 56 EP - 58 PB - De Gruyter ER - TY - JOUR A1 - Greim, Markus A1 - Kusterle, Wolfgang T1 - 23rd Conference and Workshop Rheology of Building Materials. Ostbayerische Technische Hochschule Regensburg, Germany March 12–13, 2014 JF - Applied Rheology Y1 - 2014 U6 - https://doi.org/10.3933/ApplRheol-24-3-61 VL - 24 IS - 3 SP - 61 EP - 62 PB - Kerschensteiner ER - TY - JOUR A1 - Fuersattel, Peter A1 - Plank, Claus A1 - Maier, Andreas A1 - Riess, Christian T1 - Accurate laser scanner to camera calibration with application to range sensor evaluation JF - IPSJ Transactions on Computer Vision and Applications N2 - Multi-modal sensory data plays an important role in many computer vision and robotics tasks. One popular multi-modal pair is cameras and laser scanners. To overlay and jointly use the data from both modalities, it is necessary to calibrate the sensors, i.e., to obtain the spatial relation between the sensors. Computing such a calibration is challenging as both sensors provide quite different data: cameras yield color or brightness information, laser scanners yield 3-D points. However, several laser scanners additionally provide reflectances, which turn out to make calibration to a camera well feasible. To this end, we first estimate a rough alignment of the coordinate systems of both modalities. Then, we use the laser scanner reflectances to compute a virtual image of the scene. Stereo calibration on the virtual image and the camera image are then used to compute a refined, high-accuracy calibration. It is encouraging that the accuracies in our experiments are comparable to camera-camera stereo setups and outperform another of other target-based calibration approach. This shows that the proposed algorithm reliably integrates the point cloud with the intensity image. As an example application, we use the calibration results to obtain ground-truth distance images for range cameras. Furthermore, we utilize this data to investigate the accuracy of the Microsoft Kinect V2 time-of-flight and the Intel RealSense R200 structured light camera. KW - Kinect V2 KW - Laser scanner KW - Range camera KW - RealSense R200 Y1 - 2017 U6 - https://doi.org/10.1186/s41074-017-0032-5 VL - 9 IS - 1 PB - Springer Nature ER - TY - JOUR A1 - Schermer, Detleff T1 - Design according to Eurocode 6 in practice JF - Mauerwerk N2 - For the structural design of masonry according to Eurocode 6 with the associated German national annex, the simplified method and the further simplified calculation method in Annex A are available. These procedures provide tools that can be used in practice to design standard cases quickly and easily. One feature of the verification of masonry walls under compressive loading is that no bending moments in the walls have to be determined as part of the determination of section forces and moments since the verification of the load-bearing capacity of the wall is based solely on the acting vertical force. The effects of floor end restraint and buckling are dealt with by simple equations. One new feature of verification according to Eurocode 6 is that the effect of partially supported floors on the load-bearing capacity of the wall can be included directly. The code is compact and simple to use and the further simplified calculation method is predestined for verification by manual calculation. T2 - Bemessung nach Eurocode 6 in der Praxis KW - buckling KW - calculation method KW - construction detailing KW - Eurocode 6 KW - masonry KW - structural design KW - floor bearing depth KW - further simplified Y1 - 2017 U6 - https://doi.org/10.1002/dama.201700719 SN - 1432-3427 SN - 1437-1022 VL - 21 IS - 1 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Schermer, Detleff T1 - Bemessungsbeispiele - Nachweisführung nach dem vereinfachten Verfahren JF - Mauerwerk N2 - Die Regelungen im vereinfachten Verfahren von Eurocode 6, Teil 3 [4] mit dem zugehörigen Nationalen Anhang erlauben es, in wenigen Schritten rechnerische Nachweise von Mauerwerksbauteilen durchzuführen. Anhand mehrerer Bauteilnachweise aus der Praxis wird im Folgenden die Nachweisführung nach dem vereinfachten Verfahren dargestellt. Es ist erkennbar, dass bei Einhaltung der Anforderungen an das vereinfachte Verfahren sich die rechnerische Nachweisführung sehr einfach gestaltet und der größte Zeitaufwand in der Lastermittlung der einzelnen Bauteile liegt. Eine weitere Vereinfachung, die jedoch etwas stärkere Einschränkungen des Anwendungsbereiches bedingt, ist durch das im Anhang A angegebene sog. stark vereinfachte Verfahren gegeben. Y1 - 2014 U6 - https://doi.org/10.1002/dama.201400638 SN - 1432-3427 VL - 18 IS - 6 SP - 365 EP - 370 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Steenbergen, Raphael D. J. M., A1 - Sýkora, Miroslav A1 - Diamantidis, Dimitris A1 - Holicky, Milan A1 - Vrouwenvelder, Ton T1 - Economic and human safety reliability levels for existing structures JF - Structural concrete N2 - Specifying the target reliability levels is one of the key issues in the assessment of existing structures. For a majority of existing buildings and infrastructures, the design life has been reached or will be reached in the near future. These structures need to be reassessed in order to verify their safety. Eurocodes provide a general basis primarily intended for the design of new structures, but the basic principles can be used for assessing existing buildings, too. Reliability levels are generally based on both economic optimization and criteria for human safety. In this study, both methods are elaborated for existing structures. It appears that the requirement for the same target reliability for existing and new structures is uneconomical. Further, cost optimization seems to yield rather low reliability levels and human safety criteria often become the critical factor. The study concludes with practical guidelines for establishing reliability indices for existing structures linked to Eurocode principles. KW - existing structures KW - reliability KW - safety Y1 - 2015 U6 - https://doi.org/10.1002/suco.201500022 VL - 16 IS - 3 SP - 323 EP - 332 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Schermer, Detleff A1 - Nagler, Florian A1 - Schwabe, Almut T1 - Archäologisches Haus am Petriplatz – massive Außenwandkonstruktion JF - Mauerwerk N2 - Petriplatz in Berlin is one of the earliest settlement sites in Berlin dating back to the 12th century. The Archaeological House is currently being built in this area on behalf of the Berlin Senate, which will integrate the finds associated with the site and make them directly accessible to visitors. The above-ground floors will serve as archaeological workshops and collection rooms and will feature a lecture hall. The chosen construction of the seven-storey building adapts to the local boundary conditions: Thus, the foundation is made on piles to minimize the intervention in the site and at the same time to create elements for geothermal energy. The static function as well as the fire protection requirements and the protection against external noise made it necessary to design the supporting structure-solidly in reinforced concrete. As a quasi-monolithic exterior wall structure in the standard area, a new system was developed by means of a load-bearing reinforced concrete inner shell and non-load-bearing infill of highly heat-insulating plane clay brick masonry. In addition to load transfer, particular -attention had to be paid to the issues of crack resistance, -execution and the interaction of concrete and masonry. T2 - Archaeological House at Petriplatz - massive outer wall-construction KW - archaeology KW - concrete KW - crack resistance KW - execution KW - masonry KW - multi-layer Y1 - 2021 U6 - https://doi.org/10.1002/dama.202100010 SN - 1437-1022 VL - 25 IS - 4 SP - 151 EP - 155 PB - Ernst & Sohn, a Wiley Brand ER -