TY - CHAP A1 - Bornmann, Benjamin A1 - Mingels, Stephan A1 - Lützenkirchen-Hecht, Dirk A1 - Müller, Günter A1 - Dams, Florian A1 - Schreiner, Rupert T1 - Field emission spectroscopy studies on photo-sensitive p-doped Si-tip arrays T2 - 24th International Vacuum Nanoelectronics Conference (IVNC), 2011 : 18 - 22 July 2011, Historische Stadthalle Wuppertal, Germany N2 - The influence of laser illumination on the integral as well as on the energy-resolved electron currents from well-defined p-doped Si-tip arrays was investigated. First results have provided stable cathode currents between 100 nA and 500 μA in a field range of 2-20 V/μm. Green laser illumination resulted in an enhanced cathode current and an increased population of the conduction band which can be seen in the spectra. Charging of the cathode surface, however, leads to a shift and broadening of the spectra which complicate their analysis. Therefore, further experiments with a rotatable cathode and a varying number of tips as well as with a tunable laser are planned. KW - cathodes KW - conduction bands KW - electron field emission KW - elemental semiconductors KW - field emission spectroscopy KW - field emitter arrays KW - laser illumination KW - lighting KW - p-doped silicon tips KW - photo sensitivity KW - silicon Y1 - 2011 UR - https://ieeexplore.ieee.org/document/6004582?arnumber=6004582 SN - 978-3-00-035081-8 SN - 978-1-4577-1243-2 SN - 2380-6311 SN - 2164-2370 SP - 101 EP - 102 PB - IEEE ER - TY - CHAP A1 - Prommesberger, Christian A1 - Dams, Florian A1 - Langer, Christoph A1 - Schreiner, Rupert A1 - Rutkowski, S. A1 - Bornmann, Benjamin A1 - Müller, Günter T1 - Simulation of electron trajectories of a field emission electron source in triode configuration by using finite element methods T2 - 24th International Vacuum Nanoelectronics Conference (IVNC), 2011 : 18 - 22 July 2011, Historische Stadthalle Wuppertal, Germany N2 - The finite element simulation program COMSOL Multiphysics® was used to simulate the emission efficiency of a silicon tip electron source in triode configuration for different geometries and electrode potentials. The simulation predicts a maximum emission efficiency of 84% for an optimized structure. In a second simulation a gate electrode was concentrically arranged above a single CNT column. Here, the efficiency was simulated as a function of gate hole geometry, electrode potentials and distances between the electrodes. The simulation shows that a conical shape of the gate hole results in an efficiency up to nearly 100%. KW - carbon nanotubes KW - electron field emission KW - electron source simulation KW - finite element analysis KW - simulation of electron trajectories KW - triodes Y1 - 2011 UR - https://ieeexplore.ieee.org/document/6004589 SN - 978-3-00-035081-8 SN - 978-1-4577-1243-2 SN - 2380-6311 SN - 2164-2370 SP - 144 EP - 145 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Bachmann, Michael A1 - Dams, Florian A1 - Düsberg, F. A1 - Hofmann, Martin A1 - Pahlke, Andreas A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Prommesberger, Christian A1 - Schreiner, Rupert T1 - Stability investigation of high aspect ratio n-type silicon field emitter arrays T2 - 2015 28th International Vacuum Nanoelectronics Conference (IVNC), 13-17 July 2015, Guangzhou, China N2 - Electron sources based on silicon field emitter arrays, produced in processes based on semiconductor technology, are good candidates for a miniaturized X-ray source. A key parameter for this application is the stability of the X-ray photon flux and, thus, the emission current. In the present work we have investigated the influence of the residual gas pressure and a resistor in series on the emission stability of a high aspect ratio n-type silicon emitter array with hybrid extraction electrode. An increase of current fluctuations was found for pressures above 10-6 mbar. High resistances in series to the emitter array alter the emission characteristics, but greatly suppress spikes in the emission current and improve its stability. This, however, strongly depends on the bias point. The field enhancement factor is not affected by the resistance. In a long term measurement the emission current was found to be constant after an initial phase of degradation. KW - Current measurement KW - emission current stability KW - field emitter array KW - Field emitter arrays KW - RESISTANCE KW - Resistors KW - semiconductor field emission KW - silicon KW - silicon tips KW - Stability analysis KW - Thermal stability KW - XRF spectroscopy Y1 - 2015 U6 - https://doi.org/10.1109/IVNC.2015.7225584 SP - 204 EP - 205 PB - IEEE ER - TY - JOUR A1 - Pangerl, Jonas A1 - Moser, Elisabeth A1 - Müller, Max A1 - Weigl, Stefan A1 - Jobst, Simon A1 - Rück, Thomas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A sub-ppbv-level Acetone and Ethanol Quantum Cascade Laser Based Photoacoustic Sensor– Characterization and Multi-Component Spectra Recording in Synthetic Breath JF - Photoacoustics N2 - Trace gas analysis in breath is challenging due to the vast number of different components. We present a highly sensitive quantum cascade laser based photoacoustic setup for breath analysis. Scanning the range between 8263 and 8270 nm with a spectral resolution of 48 pm, we are able to quantify acetone and ethanol within a typical breath matrix containing water and CO2. We photoacoustically acquired spectra within this region of mid-infra-red light and prove that those spectra do not suffer from non-spectral interferences. The purely additive behavior of a breath sample spectrum was verified by comparing it with the independently acquired single component spectra using Pearson and Spearman correlation coefficients. A previously presented simulation approach is improved and an error attribution study is presented. With a 3σ detection limit of 6.5 ppbv in terms of ethanol and 250 pptv regarding acetone, our system is among the best performing presented so far. KW - Acetone KW - Breath analysis KW - Photoacoustic spectroscopy KW - Quantum cascade laser KW - Spectral simulation Y1 - 2023 U6 - https://doi.org/10.1016/j.pacs.2023.100473 SN - 2213-5979 N1 - Corresponding author: Jonas Pangerl VL - 30 SP - 1 EP - 12 PB - Elsevier ER - TY - JOUR A1 - Menzel, Andreas A1 - Kammler, Martin A1 - Conrad, E. H. A1 - Yeh, V. A1 - Hupalo, Myron A1 - Tringides, Michael C. T1 - Kinetics measurements of Pb island growth on Si(111) JF - Physical Review B N2 - We present the results of kinetics experiments on quantum-size-effects (QSE) Pb islands formed on Si(111). We have looked at the evolution of seven-layer Pb islands from five-layer Pb islands due to the transport of Pb atoms from the interisland region, overcoming a barrier at the island edges, and moving to the island tops. By analyzing low-energy electron-diffraction and scanning-tunneling microscopy data, we have estimated the barrier for layer formation in this system to be ∼0.32eV. This energy is much larger than that expected from QSE electronic contributions alone. Y1 - 2003 U6 - https://doi.org/10.1103/PhysRevB.67.165314 VL - 67 IS - 16 PB - American Physical Society ER - TY - CHAP A1 - Serbun, Pavel A1 - Navitski, Aliaksandr A1 - Müller, Günter A1 - Schreiner, Rupert A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Dams, Florian T1 - Scaling of the field emission current from B-doped Si-tip arrays T2 - 25th International Vacuum Nanoelectronics Conference (IVNC) ; Jeju, Korea (South), 09.07.2012 - 13.07.2012 N2 - We have fabricated a test chip with various hexagonal arrays of B-doped Si tips (height ~ 3 μm, apex radius <; 30 nm, number 1-4447, resistivity 4 Ωcm, 100 orientation) in triangular arrangement (pitch 10 μm, density 1.16×10 6 cm -2 ) in order to systematically investigate the field emission current scaling with the number N of tips. Regulated voltage scans for 1 nA revealed rather efficient emission from nearly all tips of the arrays at an average field of 15 V/μm. The expected current plateau was always obtained at fields around 20 V/μm, but its width strongly increased with N. In this carrier depletion range, the single tip provided a much higher stability (<; 5%) of the current (2-3 nA) than at lower (>; 50 %) and higher currents (>; 30%). Integral current measurements of the hexagonal arrays resulted in a statistically improved current stability (<; 1%) but only a weak increase of the total current with N 0.28 yet. These results will be discussed with respect to the remaining inhomogeneity of the tips. KW - Anodes KW - B-doped KW - boron KW - Current measurement KW - current scaling KW - electron field emission KW - elemental semiconductors KW - field emitter arrays KW - Iron KW - Nonhomogeneous media KW - silicon KW - Voltage control Y1 - 2012 SN - 978-1-4673-1984-3 SN - 978-1-4673-1983-6 SN - 978-1-4673-1982-9 U6 - https://doi.org/10.1109/IVNC.2012.6316965 SN - 2380-6311 SN - 2164-2370 SP - 1 EP - 2 PB - IEEE CY - Piscataway, N.J. ER - TY - THES A1 - Zhang, Yunjia T1 - Microcontroller Programming of a Contactless Optical Position Measurement Device N2 - This thesis focuses on programming a microcontroller to receive and process data from a waveguide optic distance sensor, and to visualize the measured distance on a display screen. During the measurement process, LED moves above the 3D-printed D-shaped waveguide. The light transmitted through the waveguide is converted into photocurrents by photodiodes located at both ends of the optical waveguide, which are then converted into voltage signals through specific electronic components. By computing the ratio of the optical power detected at each end, the relative position of the LED along the waveguide can be determined. In this project, a microcontroller is used to acquire the voltage data, correct measurement errors, calculate the LED position, and display the result on screen in real time. Compared to manual calculation of photocurrent values, using a microcontroller for automated data processing greatly improves speed and efficiency. At the same time, real-time visualization enhances the system’s practicality and usability, making it more suitable for future applications. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84647 CY - Regensburg ER - TY - CHAP A1 - Kammler, Martin A1 - Horn- von Hoegen, Michael A1 - Voss, N. A1 - Tringides, Michael C. A1 - Menzel, Andreas A1 - Conrad, E. H. T1 - Surface Dynamics of Stepped Si(001) Studied by Temporal Leed Spectroscopy T2 - Collective Diffusion on Surfaces: Correlation Effects and Adatom Interactions (NATO Science Series II: Mathematics, Physics and Chemistry N2 - We present the first demonstration of Temporal LEED Spectroscopy’s ability to measure surface dynamics as shown by a study of step dynamics on vicinal Si(001). While we measure activation energies consistent with other work, the observed microscopic mechanism driving the fluctuations is inconsistent with previous claims. We exclude evaporation/condensation of atoms from the steps as the rate limiting kinetics in the temperature range of this experiment. Possible reasons for these differences are discussed. Y1 - 2001 U6 - https://doi.org/10.1007/978-94-010-0816-7_3 VL - 29 SP - 23 EP - 32 PB - Springer ER - TY - JOUR A1 - Streubühr, C. A1 - Kalus, Annika A1 - Zhou, Ping A1 - Ligges, Manuel A1 - Hanisch-Blicharski, Anja A1 - Kammler, Martin A1 - Bovensiepen, U. A1 - Horn-von Hoegen, Michael A1 - von der Linde, D. T1 - Comparing ultrafast surface and bulk heating using time-resolved electron diffraction JF - Applied Physics Letters N2 - From measurements of the transient Debye-Waller effect in Bismuth, we determine the buildup time of the random atomic motion resulting from the electronic relaxation after short pulse laser excitation. The surface sensitive reflection high energy electron diffraction and transmission electron diffraction yield a time constant of about 12 ps and 3 ps, respectively. The different energy transfer rates indicate relatively weak coupling between bulk and surface vibrational modes. (C) 2014 AIP Publishing LLC. Y1 - 2014 U6 - https://doi.org/10.1063/1.4872055 VL - 104 SP - 1 EP - 3 PB - American Institute of Physics ER - TY - CHAP A1 - Weigl, Stefan A1 - Müller, Max A1 - Pangerl, Jonas A1 - Rück, Thomas T1 - Scopes and Limits of Photoacoustic Spectroscopy in Modern Breath Analysis T2 - Breath Analysis N2 - Photoacoustic spectroscopy is a viable tool for trace gas detection in various application fields. In recent years, this technique has been exploited more and more for modern breath analysis as well. Within this chapter, a holistic overview of photoacoustic spectroscopy is presented, while maintaining the relationship to breath analysis. Therefore, a concise description of the fundamentals of photoacoustic spectroscopy is provided. This is essential for understanding the scopes and limits of this outstanding measurement technique being described within this chapter. In the past several different types of photoacoustic measurement setups for trace gas detection have emerged, including different light sources, modulation techniques, and detection schemes. These are described shortly and advantages as well as disadvantages, especially in relation to breath analysis, are highlighted. Though being a promising sensor principle, measurement devices based on photoacoustic spectroscopy are still rare on the sensor market, especially when it comes to trace gas detection in complex gas matrices, e.g., human breath exhale. One main reason is due to possible molecular interactions influencing the relaxational behavior of the analyte altering the sensor signal. Recent results shedding light on the intricate relaxational processes within complex gas matrices are discussed in detail, providing approaches to overcome this issue. Finally, various applications of photoacoustic spectroscopy in breath analysis are described demonstrating the great potential of this technology. Y1 - 2022 SN - 978-3-031-18526-7 U6 - https://doi.org/10.1007/11663_2022_22 SP - 101 EP - 159 PB - Springer nature ER - TY - PAT A1 - Olbrich, Florian A1 - Pongratz, Christian A1 - Bierl, Rudolf A1 - Ehrlich, Ingo T1 - Method and System for Evaluating a Structural Integrity of an Aerial Vehicle T2 - Europäisches Patentblatt (09.12.2020) zur Anmeldung: OTH Regensburg, Anmeldenummer: 19179054.2, Patentnummer 1001/3748327, Veröffentlichungsnummer: 3 748 327 Y1 - 2020 SP - 395 EP - 396 ER - TY - JOUR A1 - Ławrowski, Robert Damian A1 - Pirker, Luka A1 - Kaneko, Keita A1 - Kokubo, Hiroki A1 - Bachmann, Michael A1 - Ikuno, Takashi A1 - Remskar, Maja A1 - Schreiner, Rupert T1 - Field emission from nanotubes and flakes of transition metal dichalcogenides JF - Journal of Vacuum Science and Technology B N2 - Transition metal dichalcogenides such as MoS2 and WS2 are low-dimensional semiconductor materials. MoS2 and WS2 nanotubes and flakes were grown by a chemical transport reaction under a temperature gradient. I2 was used as a transport agent for previously synthesized MoS2 and WS2, respectively. These multilayered nanotubes are indirect bandgap semiconductors with a bandgap depending on their diameter. WS2 flakes were prepared by the sulfurization of thin WOx flakes. To increase the field enhancement of such low-dimensional structures by a higher aspect ratio, two approaches were examined: (a) the MoS2 and WS2 nanotubes were attached individually by a focused ion beam with Pt on dry etched n-type Si pillars and (b) the WS2 flakes were grown directly on the surface of the (n-type and p-type) Si pillars. Integral field emission measurements were performed in a diode configuration with a 50 μm mica spacer in a vacuum chamber at pressures of about 10−9 mbar. At a voltage of 900 V (18 MV/m), the integral emission current from the nanotubes is up to 11 μA for the lateral mounted MoS2 and about 1.3 μA (1.0 μA) for the upright mounted WS2 (MoS2). The onset voltage for a current of 1 nA is about 550 V for MoS2 and 500 V for WS2, respectively. The voltage conversion factor is in the range of 6 × 104–8 × 104 cm−1 for the nanotubes. The mounted MoS2 flakes show a field emission current of about 6 μA at 18 MV/m in contrast to the directly grown WS2 flakes, which show a pronounced saturation regime and, therefore, a lower emission current of about 0.5 μA is reached at 1500 V (25 MV/m). The WS2 flakes show a two times higher (1 × 105 cm−1) voltage conversion factor in comparison to the MoS2 flakes (5 × 104 cm−1). The extracted characteristics of the current-limiting part show a difference in the behavior of the extracted current-limiting characteristics between the lateral (linear) and upright mounted (exponential) nanotubes and the MoS2 flakes. In contrast, the WS2 flakes show charge carrier depletion effects. Y1 - 2020 U6 - https://doi.org/10.1116/1.5140474 VL - 38 IS - 3 SP - 032801 PB - AIP Publishing ER - TY - JOUR A1 - Kleshch, Victor I. A1 - Serbun, Pavel A1 - Lützenkirchen-Hecht, Dirk A1 - Orekhov, Anton A1 - Ivanov, Victor E. A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Schreiner, Rupert A1 - Obraztsov, Alexander N. T1 - A Comparative Study of Field Emission from Pristine, Ion-treated and Tungsten Nanoparticle-decorated p-type Silicon Tips JF - Physica Status Solidi B N2 - The field electron emission characteristics of individual tips of a silicon field emitter array are analyzed. The array of conical‐shaped tips is fabricated on a p‐type silicon wafer by using reactive ion etching and sharpening oxidation. The tips are decorated with single tungsten nanoparticles at their apexes. Furthermore, the focused ion beam is also used to increase surface conductivity of some of the tips. Comparative measurements of field emission are performed by using the scanning anode probe field emission microscopy technique. All types of tips demonstrated emission activation consisting of a sudden current increase at a certain value of the applied voltage. Compared to the pristine tips, a noticeable reduction of the saturation effect in the current–voltage characteristics and a smaller light sensitivity for the decorated tips is found. For ion‐treated tips, saturation effects and light sensitivity are completely suppressed. Scanning electron microscopy observations reveal the formation of single nanoscale protrusions extending from the metal particles and from the apexes of bare ion‐treated tips after exposure under strong electric fields during the field emission measurements. The influence of protrusions growth on characteristics of silicon field emitter arrays is discussed. Y1 - 2019 U6 - https://doi.org/10.1002/pssb.201800646 VL - 256 IS - 9 PB - Wiley ER - TY - CHAP A1 - Serbun, Pavel A1 - Porshyn, Vitali A1 - Müller, Günter A1 - Lützenkirchen-Hecht, Dirk A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Schreiner, Rupert T1 - Field emission behavior of single n- and p-type black Si pillar structures T2 - International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan N2 - We have investigated the properties of single n- and p-type black silicon (b-Si) pillars with a height of 20 μ m under strong electric field and halogen lamp or laser illumination. For both type of b-Si pillar structures, I-V measurements revealed strong activation effects, which consisted in sudden current increases during the first up/down voltage sweeps. The maximum reproducible emission current from a single n-type b-Si pillar structure was about 15 μ A. A pronounced saturation region at 240 nA was observed for a single p-type b-Si pillar. The current fluctuation over time showed a standard deviation of 28% and 2.5% for n- and p-type single b-Si pillar structures, respectively. Optical switching under halogen lamp illumination resulted in at least 3 times higher saturation currents and showed a linear dependence of the FE current on the laser power. KW - field emission KW - black silicon KW - photoemission Y1 - 2018 U6 - https://doi.org/10.1109/IVNC.2018.8520292 PB - IEEE ER - TY - JOUR A1 - Mingels, Stephan A1 - Porshyn, Vitali A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Schreiner, Rupert A1 - Lützenkirchen-Hecht, Dirk A1 - Müller, Günter T1 - Photosensitivity of p-type black Si field emitter arrays JF - Journal of Applied Physics N2 - We have investigated the properties of black Si field emitter arrays under strong electric fields and laser illumination. A low onset field of 1.8 MV/m for an emission current of 1 nA was obtained. A pronounced saturation region of the dark and photo-enhanced current was observed, which provided a short-term stability of 0.1% at 0.4 μA and 0.7% at 1.0 μA, respectively. As maximum value for the photosensitivity, an on-off current switching ratio of 43 reaching about 13 μA was achieved at a laser power of 15 mW. Electron spectra in the dark and under laser illumination are presented, showing a current and light-sensitive voltage drop across the emitters as well as hints for hot electron emission. Y1 - 2016 U6 - https://doi.org/10.1063/1.4948328 VL - 119 IS - 16 ER - TY - CHAP A1 - Serbun, Pavel A1 - Porshyn, Vitali A1 - Müller, Günter A1 - Mingels, Stephan A1 - Lützenkirchen-Hecht, Dirk A1 - Bachmann, Michael A1 - Düsberg, Felix A1 - Dams, Florian A1 - Hofmann, Martin A1 - Pahlke, Andreas A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Schreiner, Rupert T1 - Field emission behavior of Au-tip-coated p-type Si pillar structures T2 - 29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada N2 - Precisely aligned high-aspect-ratio (HAR) silicon tip arrays were fabricated using enhanced reactive ion etching with an inductively-coupled-plasma followed by a sharpening oxidation. A gold thin film was then sputtered only on the tips of the HAR structures. Field-emission (FE) properties from Au-coated HAR p-Si tip array cathodes have been systematically investigated by means of field emission scanning microscopy (FESM). A rather high efficiency of the HAR Si structures (71% at 550 V), but limited homogeneous FE with currents of 1-600 nA might be correlated with the varying geometry of the tips and the presence of oxides. I-V measurements of single Au-coated HAR emitters revealed activation effects and the saturation current region at 3 nA. An increase of the saturation current by 4 orders of magnitude was observed during 20 hours of conditioning at constant voltage, which finally resulted in nearly reproducible FN curves with a ß-factor of 473. An excellent stability of the emission current of less than 1 % was obtained during the additional long-time conditioning at constant voltage. Optical switching under halogen lamp illumination resulted in at least 2 times higher saturation currents and showed a linear dependence of the FE current on the light color temperature. KW - field emission KW - p-type Si-pillar array KW - surface oxide effects KW - photoemission Y1 - 2016 U6 - https://doi.org/10.1109/IVNC.2016.7551516 SN - 2380-6311 SP - 181 EP - 182 PB - IEEE ER - TY - CHAP A1 - Serbun, Pavel A1 - Porshyn, Vitali A1 - Lützenkirchen-Hecht, Dirk A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Schreiner, Rupert T1 - Photosensitivity of single silicon high-aspect-ratio tips with different doping levels T2 - International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan N2 - Photosensitivity of single lightly p-doped, highly p-doped, with an integrated p/n junction and intrinsic high-aspect-ratio (HAR) silicon tips was investigated in an ultra-high vacuum environment. The current-voltage characteristics (I-V) of the lightly doped p-type HAR tips showed a characteristic current saturation at around 10-12 nA, whereas the HAR Si tips with p/n junction showed similar saturation phenomena, however, at much smaller current values starting at ~20-30 pA. Optical switching under a halogen lamp illumination resulted in at least 2-4 times higher saturation currents and showed a linear dependence between the illumination power and the FE current, for both types of structures. In case of the highly p-doped HAR tips optical current switching effects, i. e. current saturation, were observed at rather low current levels 1-2 pA. Intrinsic HAR Si-tips showed relative unstable field emission behavior without a clear evidence of the photosensitivity. KW - field emission KW - Si p/n junction KW - p-type Si KW - photosensitivity Y1 - 2018 U6 - https://doi.org/10.1109/IVNC.2018.8520288 PB - IEEE ER - TY - CHAP A1 - Schreiner, Rupert A1 - Langer, Christoph A1 - Prommesberger, Christian A1 - Ławrowski, Robert Damian A1 - Dams, Florian A1 - Bachmann, Michael A1 - Düsberg, F. A1 - Hofmann, Martin A1 - Pahlke, Andreas A1 - Serbun, Pavel A1 - Mingels, Stephan A1 - Müller, Günter T1 - Semiconductor field emission electron sources using a modular system concept for application in sensors and x-ray-sources T2 - 2015 28th International Vacuum Nanoelectronics Conference (IVNC), 13-17 July 2015, Guangzhou, China N2 - Semiconductor field emitters are suitable candidates for applications, which require a very stable field emission (FE) current and a high emission uniformity over the entire emission area. By using different materials and geometries, we are able to vary the FE characteristics within a wide range. Each specific application requires its own optimized design for the cathode as well as for the other parts of the FE electron source. To meet as many of these requirements as possible while using only a limited number of different prefabricated components, we established a modular system concept for our FE electron source. This allows the implementation of almost every cathode material. For first characterizations, we used gated p-type Si cathodes with 16 tips. We obtained stable FE currents of 0.4 μA for a grid-potential of 400 V and a gate potential of 100 V. Almost 100% of the electrons are emitted towards the grid-electrode. Parasitic leakage paths, as well as the electron emission towards the gate-electrode can be neglected. Approximately 10% of the electrons are transmitted through the grid and reach the external anode. This is in good agreement with the optical transmission through the grid-mesh. KW - Anodes KW - CATHODES KW - electron sources KW - GEOMETRY KW - Iron KW - Logic gates KW - semiconductor field emission KW - silicon Y1 - 2015 U6 - https://doi.org/10.1109/IVNC.2015.7225572 SP - 178 EP - 179 PB - IEEE ER - TY - CHAP A1 - Ławrowski, Robert Damian A1 - Langer, Christoph A1 - Prommesberger, Christian A1 - Schreiner, Rupert A1 - Mingels, Stephan A1 - Porshyn, Vitali A1 - Serbun, Pavel A1 - Müller, Günter T1 - Field emission from surface textured GaN with buried double-heterostructures T2 - 2015 28th International Vacuum Nanoelectronics Conference (IVNC), 13-17 July 2015, Guangzhou, China N2 - In this contribution we report on field emission (FE) cathodes based on thin-film LED-technology and surface texturing. The FE cathode can be used both as an n-GaN cathode with an electrical contact at the top side metallization as well as a pn-GaN diode contacting only the p-GaN layer at the bottom side of the structure. The local and integral FE properties of the textured surface of the LED structure were investigated. For n-GaN an integral emission current up to 1.0 μA at an electric field of 19 V/μm was achieved. The pn-GaN diode measurements showed an integral current saturation behavior with two orders of magnitude lower FE currents. Regulated voltage scans obtained by FE scanning microscopy revealed a well-distributed emission over the whole cathode area. Measurements under pulsed tunable laser illumination and moderate electric fields indicated charge carrier generation in the buried double-heterostructures at photon energies below 3.5 eV besides normal photoemission above 4.1 eV. KW - CATHODES KW - Current measurement KW - Electric fields KW - field emission KW - Gallium nitride KW - GaN KW - Iron KW - Light emitting diodes KW - photoemission KW - Surface texture Y1 - 2015 U6 - https://doi.org/10.1109/IVNC.2015.7225548 SP - 106 EP - 107 PB - IEEE ER - TY - CHAP A1 - Bresinsky, Markus A1 - Reusner, Florian T1 - GLOBE – Learn and Innovate Digitization by a Virtual Collaboration Exercise and Living Lab T2 - Interactivity, Game Creation, Design, Learning, and Innovation. 6th International Conference, ArtsIT 2017, and Second International Conference, DLI 2017, Heraklion, Crete, Greece, October 30–31, 2017, Proceedings N2 - This paper presents an advanced interactive learning platform .dot that implements the GLOBE exercise, using innovative information and communication technologies to enhance learning and development of management and leadership skills in a complex organizational setting. GLOBE on the one hand focuses on competences around ICT and virtual collaboration, and on the other hand on digital transformation, technologies and tools at higher education institutions. By this applied science, learning and developing on the real-world platform, analysis and drive of digital innovation and transformation can be fostered. The main goal is to co-create knowledge and solutions in the following focused subjects: Management and leadership of multidisciplinary, multinational and multicultural virtual and real collaboration in a complex organizational environment. GLOBE uses real world scenarios (e.g. United Nations mission) and involves real world actors. This comprehensive educational approach should enhance learning techniques and leverage learning progress with hands-on experiences and applied science in the context of ICT and virtual collaboration, and the embodied dynamics of behavior to support innovation and development. KW - Digitization KW - Experiential learning KW - Human factors KW - ICT KW - Interactive and collaborative learning KW - Living Lab KW - Open innovation KW - Problem-based learning KW - Virtual collaboration Y1 - 2018 U6 - https://doi.org/10.1007/978-3-319-76908-0_26 SP - 273 EP - 281 PB - Springer Nature ER - TY - CHAP A1 - Mingels, Stephan A1 - Porshyn, Vitali A1 - Serbun, Pavel A1 - Lützenkirchen-Hecht, Dirk A1 - Müller, Günter A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Schreiner, Rupert A1 - Lutzenkirchen-Hecht, Dirk T1 - Photo-enhanced field emission properties of p-doped black Si arrays T2 - 2016 29th International Vacuum Nanoelectronics Conference (IVNC), 11-15 July 2016, Vancouver, BC, Canada N2 - We have carried out systematic investigations of p-type black Si field emitter arrays under laser illumination. As expected the current-voltage characteristic revealed a strong saturation providing a high photosensitivity, which had a maximum on-off ratio of 43 at a maximum current of 13 μA. The saturation current was stable in the dark as well as under illumination with fluctuations <;0.7%. Results from time-resolved measurements of the photo-sensitivity showed a rather fast response but a long decay time. Electron spectra in the dark and under laser illumination revealed the origin of the emission. KW - black Si KW - Decision support systems KW - photo-enhanced field emission Y1 - 2016 U6 - https://doi.org/10.1109/IVNC.2016.7551447 SP - 1 EP - 2 PB - IEEE ER -