TY - CHAP A1 - Hausler, Peter A1 - Roth, Carina A1 - Vitzthumecker, Thomas A1 - Bierl, Rudolf ED - Ribeiro, Paulo ED - Raposo, Maria T1 - Miniaturized Surface Plasmon Resonance Based Sensor Systems BT - Opportunities and Challenges T2 - Optics, Photonics and Laser Technology 2018 N2 - Surface Plasmon Resonance (SPR) is a well-known and established technology in bioanalysis and pharmaceutical sciences. Due to the expensive instrumentation and the need of trained people, it is mainly limited to applications in laboratories. However, there are some areas like environmental monitoring, chemical processing and civil infrastructure, which urgently need new sensor technologies. SPR has the potential to serve these fields. In order to be qualified for a use in these areas SPR has to overcome some hurdles. The instrumentation has to be robust, small in size and cheap. A device, which fits these needs, will be a micro-opto-electro-mechanical system (MOEMS) with integrated intelligent algorithms. In this book chapter, examples of miniaturized SPR devices are introduced, the limitations which have to be overcome as well as the possibilities for future applications are proposed. Due to the manifold advantages of this technology and the dropping prices for imaging sensors, Surface Plasmon Resonance imaging (SPRi) might become one of the leading technologies for SPR smart sensor systems. Y1 - 2019 SN - 978-3-030-30112-5 U6 - https://doi.org/10.1007/978-3-030-30113-2_8 SP - 169 EP - 195 PB - Springer Nature CY - Cham ER - TY - CHAP A1 - Singla, Rashmi A1 - de Ponte, Ulrike ED - Mayer, Claude-Hélène ED - Vanderheiden, Elisabeth T1 - Love in the Context of Transnational Academic Exchanges: Promoting Mental Health and Wellbeing T2 - International Handbook of Love N2 - Educational and cultural dimensions of transnational academic exchange such as student exchanges, double degree programmes, internships have been researched but the romantic dimensions are almost overlooked, especially qualitatively, while Green (EU’s Erasmus study abroad programme is ‘responsible for 1m babies’, 2014) documents that one quarter students on Erasmus exchange scheme met their long-term partner while studying abroad. The chapter explores love, with focus on formation of intimate relations in academic exchanges in the European settings. The method is case-studies drawn from two projects based in Denmark, the first about ethnically intermarried couples (Singla, Intermarriage and mixed parenting: Promoting mental health & wellbeing, crossover love. Palgrave Macmillan, 2015) and the second, an ongoing project about LAT (Living Apart Together) transnational couples (Singla & Varma, LAT (Living Apart Together) transnational couples: Promoting mental health and wellbeing, 2018), moving beyond ‘methodological nationalism and- conjugalism’. The theoretical framework is Cultural Psychology and foreground is a combination of Narrative Psychology, intersectionality, digital emotional reflexivity and transnationalism. Moreover, aspects related to figuring out criteria of the exchange situation abroad, which can underpin explaining the high rate of long-term relationships while studying abroad, are included. Those aspects are based on a framework, in which intercultural and developmental psychological findings are linked. The 3–4 case studies are drawn from empirical research with eight couples in the first study and 20 couples in the second. The narratives are thematically analysed, whereas two themes regarding participants’ motivation for establishing relationship despite differences and long-term sustaining of the relationship are described in the chapter. Preliminary findings nuance the phenomenon of love in academic exchanges, invoking concepts such as educational homogamy, balancing independence and togetherness, diversities of connectivities intersecting social media and intimacies. Furthermore, the significant others’ support and opposition of these couples’ love dynamics are covered, along with considerations linked to the concept of the emotional availability (Saunders, Kraus, Barone & Biringen, Frontiers in Psychology, 2015) based on Bowlby’s attachment theory and the shared third (Benjamin, Psychoanalytic Quarterly, 73(1), 5–46, 2004). Lastly, ‘good practices’ for promoting the mental health and wellbeing of such academic exchange couples are delineated along with suggestions for relevant services for those experiencing psychosocial problems. Educational and cultural dimensions of transnational academic exchange such as student exchanges, double degree programmes, internships have been researched but the romantic dimensions are almost overlooked, especially qualitatively, while Green (EU’s Erasmus study abroad programme is ‘responsible for 1m babies’, 2014) documents that one quarter students on Erasmus exchange scheme met their long-term partner while studying abroad. The chapter explores love, with focus on formation of intimate relations in academic exchanges in the European settings. The method is case-studies drawn from two projects based in Denmark, the first about ethnically intermarried couples (Singla, Intermarriage and mixed parenting: Promoting mental health & wellbeing, crossover love. Palgrave Macmillan, 2015) and the second, an ongoing project about LAT (Living Apart Together) transnational couples (Singla & Varma, LAT (Living Apart Together) transnational couples: Promoting mental health and wellbeing, 2018), moving beyond ‘methodological nationalism and- conjugalism’. The theoretical framework is Cultural Psychology and foreground is a combination of Narrative Psychology, intersectionality, digital emotional reflexivity and transnationalism. Moreover, aspects related to figuring out criteria of the exchange situation abroad, which can underpin explaining the high rate of long-term relationships while studying abroad, are included. Those aspects are based on a framework, in which intercultural and developmental psychological findings are linked. KW - Academic exchange KW - Diversities of connectivities KW - Educational homogamy KW - Emotional availability KW - Intimate relationship KW - Love KW - Narrative psychology Y1 - 2021 SN - 978-3-030-45995-6 U6 - https://doi.org/10.1007/978-3-030-45996-3_32 VL - 67 SP - 599 EP - 620 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Bedi-Visschers, Marion T1 - Von der hilfreichen Kätzin zum Gestiefelten Kater JF - Tierstudien 15/2019 : Tiere erzählen Y1 - 2019 UR - https://download.e-bookshelf.de/download/0012/6113/68/L-O-0012611368-0041192977.pdf VL - 8 IS - 15 SP - 33 EP - 44 PB - Neofelis Verlag ER - TY - JOUR A1 - Rothleitner, Christian A1 - Schlamminger, Stephan T1 - Invited Review Article: Measurements of the Newtonian constant of gravitation, G JF - Review of Scientific Instruments N2 - By many accounts, the Newtonian constant of gravitation G is the fundamental constant that is most difficult to measure accurately. Over the past three decades, more than a dozen precision measurements of this constant have been performed. However, the scatter of the data points is much larger than the uncertainties assigned to each individual measurement, yielding a Birge ratio of about five. Today, G is known with a relative standard uncertainty of 4.7 x 10(-5), which is several orders of magnitudes greater than the relative uncertainties of other fundamental constants. In this article, various methods to measure G are discussed. Alarge array of different instruments ranging from the simple torsion balance to the sophisticated atom interferometer can be used to determine G. Some instruments, such as the torsion balance can be used in several different ways. In this article, the advantages and disadvantages of different instruments as well as different methods are discussed. A narrative arc from the historical beginnings of the different methods to their modern implementation is given. Finally, the article ends with a brief overview of the current state of the art and an outlook. KW - acceleration KW - ADJUSTMENT KW - ATOM KW - BALANCE KW - CODATA RECOMMENDED VALUES KW - FORCE KW - FUNDAMENTAL PHYSICAL CONSTANTS KW - INTERFEROMETRY KW - MASS KW - PRECISION-MEASUREMENT Y1 - 2017 U6 - https://doi.org/10.1063/1.4994619 VL - 88 IS - 11 PB - AIP Publishing ER - TY - JOUR A1 - Dams, Florian A1 - Schreiner, Rupert T1 - Influencing factors on the sensitivity of MEMS-based thermal conductivity vacuum gauges JF - Journal of vacuum science & technology A N2 - The measurement range of thermal conductivity vacuum gauges is mainly influenced by the sensitivity of the sensing element to variations in pressure. An enhanced definition of sensitivity shows its theoretical dependence on the geometric measures of the sensor element at the whole pressure range. This value gives the possibility of direct comparison between different types of sensor structures without the influence of the operating conditions. To study the influencing factors, sensor chips with heated surfaces in the order of some tens of mm 2 were realized by microelectromechanical systems-based fabrication techniques. By a silicon-glass hybrid process two cold planes were formed in a distance of 150 mu m above and below the heated element. The thermal conductance of devices with different geometric measures was determined in constant temperature operating mode by usage of embedded measurement equipment. In this configuration the sensor signals were sensitive to pressure in a region from 10(-5) mbar. The sensitivity was extracted by a fit of the theoretical model to the measurement data and showed the predicted dependencies on the geometric measures. (C) 2014 American Vacuum Society. KW - Pirani Gauge KW - Pressure Sensor Y1 - 2014 U6 - https://doi.org/10.1116/1.4867486 VL - 32 IS - 3 PB - AVS ER - TY - JOUR A1 - Betz, Michael A. A1 - Büchele, Patric A1 - Brünnler, Manfred A1 - Deml, Sonja A1 - Lechner, Alfred T1 - Silicon micro venturi nozzles for cost-efficient spray coating of thin organic P3HT/PCBM layers JF - Journal of micromechanics and microengineering N2 - Improvements on spray coating are of particular interest to different fields of technology as it is a scalable deposition method and processing from solutions offer various application possibilities outside of typical facilities. When it comes to the deposition of expensive and film-forming media such as organic semiconductors, consumption and nozzle cleaning issues are of particular importance. We demonstrate the simple steps to design and fabricate micro venturi nozzles for economical spray coating with a consumption as low as 30-50 mu l.min(-1). For spray coating an active area of 25 cm(2) a 2.45-4.01 fold coating efficiency is observed compared to a conventional airbrush nozzle set. The electrical characterization of first diodes sprayed with an active layer thickness of similar to 750 nm using a single micronozzle at a coating speed of 1.7 cm(2).min(-1) reveals a good external quantum efficiency of 72.9% at 532 nm and a dark current of similar to 7.4.10(-5) mA.cm(-2), both measured at -2 V. Furthermore, the high resistance of the micronozzles against solvents and most acids is provided through realization in a silicon wafer with silicon dioxide encapsulation, therefore allowing easy and effective cleaning. KW - deep reactive ion etching KW - microfluidics KW - organic photodiodes KW - organic semiconductors KW - spray coating KW - venturi nozzles Y1 - 2017 U6 - https://doi.org/10.1088/0960-1317/27/1/015019 VL - 27 IS - 1 PB - IOP Publishing ER - TY - JOUR A1 - Liebherr, Raphaela B. A1 - Hutterer, Albert A1 - Mickert, Matthias J. A1 - Vogl, Franziska C. A1 - Beutner, Andrea A1 - Lechner, Alfred A1 - Hummel, Helmut A1 - Gorris, Hans H. T1 - Three-in-one enzyme assay based on single molecule detection in femtoliter arrays JF - Analytical and bioanalytical chemistry N2 - Large arrays of femtoliter-sized chambers are important tools for single molecule research as well as bioanalytical applications. We have optimized the design and fabrication of two array types consisting of 250 × 250 (62 500) femtoliter chambers either by surface etching of fused silica slides or by polydimethylsiloxane (PDMS) molding. Highly diluted solutions of β-galactosidase were enclosed in such arrays to monitor the fluorogenic reactions of hundreds of individual enzyme molecules in parallel by wide-field fluorescence microscopy. An efficient mechanical sealing procedure was developed to prevent diffusion of the fluorescent reaction product out of the chambers. Different approaches for minimizing non-specific surface adsorption were explored. The signal acquisition was optimized to grant both a large field of view and an efficient signal acquisition from each femtoliter chamber. The optimized femtoliter array has enabled a three-in-one enzyme assay system: First, the concentration of active enzyme can be determined in a digital way by counting fluorescent chambers in the array. Second, the activity of the enzyme bulk solution is given by averaging many individual substrate turnover rates without the need for knowing the exact enzyme concentration. Third-unlike conventional enzyme assays-the distribution of individual substrate turnover rates yields insight into the conformational heterogeneity in an enzyme population. The substrate turnover rates of single β-galactosidase molecules were found to be broadly distributed and independent of the type of femtoliter array. In general, both types of femtoliter arrays are highly sensitive platforms for enzyme analysis at the single molecule level and yield consistent results. KW - ARRAYS KW - Digital concentration readout KW - Enzyme kinetics KW - Fluorescence microscopy KW - Single molecule detection Y1 - 2015 U6 - https://doi.org/10.1007/s00216-015-8910-0 VL - 407 IS - 24 SP - 7443 EP - 7452 PB - Springer ER - TY - JOUR A1 - Ruhl, Guenther A1 - Wittmann, Sebastian A1 - Koenig, Matthias A1 - Neumaier, Daniel T1 - The integration of graphene into microelectronic devices JF - Beilstein Journal of Nanotechnology N2 - Since 2004 the field of graphene research has attracted increasing interest worldwide. Especially the integration of graphene into microelectronic devices has the potential for numerous applications. Therefore, we summarize the current knowledge on this aspect. Surveys show that considerable progress was made in the field of graphene synthesis. However, the central issue consists of the availability of techniques suitable for production for the deposition of graphene on dielectric substrates. Besides, the encapsulation of graphene for further processing while maintaining its properties poses a challenge. Regarding the graphene/metal contact intensive research was done and recently substantial advancements were made towards contact resistances applicable for electronic devices. Generally speaking the crucial issues for graphene integration are identified today and the corresponding research tasks can be clearly defined. KW - BORON-NITRIDE KW - CHEMICAL-VAPOR-DEPOSITION KW - CONTACT-RESISTANCE KW - contacts KW - COPPER FOILS KW - deposition KW - ELECTRODES KW - encapsulation KW - FILMS KW - graphene KW - GROWTH KW - LOW-TEMPERATURE KW - process integration KW - RAMAN-SPECTROSCOPY KW - SUBSTRATE Y1 - 2017 U6 - https://doi.org/10.3762/bjnano.8.107 VL - 8 SP - 1056 EP - 1064 PB - Beilstein-Institut ER - TY - CHAP A1 - Zeitler, Berndt A1 - Hoeller, Christoph A1 - Reinhold, Steffi T1 - Maximum Fast time-weighted levels - When can a transient be seen as a Dirac impulse? T2 - Internoise 2023, 20–23 August 2023, Chiba, Greater Tokyo N2 - It is common practice to use maximum FAST time-weighted sound pressure levels to assess transient impact noise, as these levels correlate well with human perception of impact noise. Maximum FAST time-weighted levels are known to be dependent on the reverberation time of the receiving room. In previous studies, an analytical correction term was developed using a Dirac impulse. The correction term is used to calculate the maximum FAST time-weighted levels from peak sound pressure levels. Peak levels are independent of the reverberation time of the room. Applying the correction term makes it possible to compare measurement results from different rooms. The correction term has been validated in several studies for the standard rubber impact ball. In this paper, the influence of the source signal (Dirac impulse) on the correction term is studied. Analytical and numerical models are employed to investigate the consequences of stretching the impulse in time and of changing its shape. The results are compared with empirical solutions developed in other studies. Y1 - 2023 UR - https://www.researchgate.net/publication/373546707_Maximum_Fast_time-weighted_levels_-_When_can_a_transient_be_seen_as_a_Dirac_impulse ER - TY - CHAP A1 - Blödt, Adrian A1 - Höller, Christoph T1 - Akustische Verbesserungsmaßnahmen an Stoßstellen im Holzbau T2 - Fortschritte der Akustik DAGA 2022: 48. Jahrestagung für Akustik, 21. - 24. März 2022, Stuttgart und Online Y1 - 2022 PB - Deutsche Gesellschaft für Akustik e.V. CY - Berlin ER - TY - RPRT A1 - Höller, Christoph A1 - Zeitler, Berndt A1 - Sabourin, Ivan T1 - Airborne and impact sound insulation data for cold-formed steel-framed walls and floors N2 - This report presents the results of an extensive series of direct sound insulation tests of cold-formed steel-framed walls and floors. The direct airborne sound insulation of 30 walls with cold-formed steel framing was measured in accordance with ASTM E90-09. The walls had steel studs with a depth of 92 mm (3-5/8”) or 152 mm (6”), and with a steel thickness of 1.09 mm (0.043”) or 1.37 mm (0.054”). Other parameters that were investigated included the number of layers and thickness of gypsum board, the cavity insulation, the stud spacing, and the use of resilient channels. The test results for some non-standard wall configurations that were tested for research purposes (e.g. for walls with gypsum board on one side only) are also included in this report. The direct airborne and impact sound insulation of 17 floors with cold-formed steel framing was measured in accordance with ASTM E90-09 and ASTM E492-09, respectively. The floors had steel joists with a depth of 254 mm (10”) or 317 mm (12.5”), and with a steel thickness of 1.37 mm (0.054”). The top surface of the floor/ceiling assemblies was composed of a corrugated steel deck with poured gypsum concrete, while the bottom surface was composed of a gypsum board ceiling on resilient channels. The influence of the joist depth and the number of layers and thickness of the ceiling gypsum board was investigated, as well as the influence of several floor coverings (e.g. laminate or carpet). The report presents the detailed specimen descriptions and specimen properties and the results from the standardized tests according to ASTM E90-09 and ASTM E492-09. Brief analyses of the parameters affecting the sound insulation of the steel-framed assemblies are provided. The tests presented in this report were part of a large research study that also included an investigation into the flanking sound transmission in cold-formed steel-framed buildings. The results of that study are described in the NRC Research Report RR-337, “Apparent Sound Insulation in Cold-Formed Steel-Framed Buildings” [1]. The NRC Research Report RR-337 also includes some of the airborne sound insulation results presented here, albeit without listing the detailed specimen descriptions and specimen properties that are provided in this report. Y1 - 2018 U6 - https://doi.org/10.4224/23002823 PB - National Research Council of Canada. Construction ER - TY - JOUR A1 - Höller, Christoph A1 - Gibbs, Barry M. T1 - Source substitution method for obtaining the power transmission from vibrating sources in buildings JF - Applied Acoustics N2 - This paper describes a method analogous to the airborne sound source substitution method, to estimate the vibrational power injected by a structure-borne sound source into the supporting building element. The injected vibrational power is required for prediction of the structure-borne sound pressure from vibrating equipment in buildings. The paper focuses on high-mobility sources connected to low-mobility receivers, a situation which is commonly encountered in heavyweight construction. The mobility mismatch simplifies the transformation of laboratory measurement data to prediction of transmitted power in-situ. Three case studies were performed. In the first study, the power injected by a simple test source into a resiliently supported aluminium plate was determined using direct and indirect methods. Source substitution was investigated with different calibration options: steady-state excitation, transient excitation, and spatial averaging. The source power could be determined within 4 dB, compared with direct measurements of the injected power. In the second study, the power injected by a second source into a concrete transmission suite floor was determined. The third study was of a combined heating and power unit on a masonry wall. In this study, a reference sound pressure level in a receiver room was calculated and compared with a criterion curve for the assessment of low-frequency noise complaints. The case studies demonstrate that structure-borne sound source substitution is a promising development of the reception plate method. While the latter can be used if a free reception plate is available, the former circumvents problems of determining the transmitted power into coupled plates and therefore has application to real building conditions. The use of the instrumented hammer for the calibration and the use of spatial averaging significantly simplify the method. Y1 - 2018 U6 - https://doi.org/10.1016/j.apacoust.2018.07.014 VL - 141 SP - 240 EP - 249 PB - Elsevier ER - TY - JOUR A1 - Lievens, Matthias A1 - Höller, Christoph A1 - Dietrich, Pascal A1 - Vorländer, Michael T1 - Predicting the Interaction Between Structure-Borne Sound Sources and Receiver Structures from Independently Measured Quantities BT - Case Study of a Washing Machine on a Wooden Joist Floor JF - Acta Acustica united with Acustica N2 - Structure-borne sound sources are usually characterised by their source activity and source mobility. By combining this data with the mobility of receiver structures it is theoretically possible to predict the sound pressure level in a building. In a case study of a washing machine on a wooden joist floor this prediction process was investigated. The prediction was based on the normal force component only. The contact area at the feet of the washing machine was made as small as possible to avoid the influence of moments while the in-plane components were assumed negligible. These conditions proved to allow for accurate predictions in the coupled state in a previous publication [1]. The results show that the prediction from independently measured normal source and receiver quantities yields large errors below 125 Hz as a consequence of the above assumption. Between 125 and 900 Hz the error of the prediction is within ± 5 dB. The case study further investigated two assumptions frequently encountered in practice: low and high-mobility sources and no cross-coupling between the feet Y1 - 2014 U6 - https://doi.org/10.3813/AAA.918688 VL - 100 IS - 1 SP - 79 EP - 92 PB - European Acoustics Association (EAA) ER - TY - RPRT A1 - Höller, Christoph A1 - Mahn, Jeffrey A1 - Quirt, David A1 - Schoenwald, Stefan A1 - Zeitler, Berndt T1 - Apparent sound insulation in cross-laminated timber buildings N2 - This Report presents the results from experimental studies of airborne sound transmission, together with an explanation of calculation procedures to predict the apparent airborne sound transmission between adjacent spaces in a building whose construction is based on cross-laminated timber (CLT) panels. There are several types of CLT constructions which are commercially available in Canada, but this study only focused on CLT panels that have adhesive between the faces of the timber elements in adjacent layers, but no adhesive bonding the adjacent timber elements within a given layer. There were noticeable gaps (up to 3 mm wide) between some of the timber elements comprising each layer of the CLT assembly. These CLT panels could be called “Face-Laminated CLT Panels” but are simply referred to as CLT panels in this Report. Another form of CLT panels has adhesive between the faces of the timber elements in adjacent layers as well as adhesive to bond the adjacent timber elements within a given layer. These are referred to as “Fully-Bonded CLT Panels” in this Report. Because fully-bonded CLT panels have different properties than face-laminated CLT panels, the sound transmission data and predictions in this Report do not apply to fully-bonded CLT panels. Y1 - 2017 U6 - https://doi.org/10.4224/23002009 PB - National Research Council of Canada. Construction ER - TY - JOUR A1 - Höller, Christoph A1 - Gibbs, Barry M. T1 - Indirect determination of the mobility of structure-borne sound sources JF - Journal of Sound and Vibration N2 - Methods are considered for the indirect determination of the mobility of structure-borne sound sources. Instead of performing measurements on the source in the free state, the source mobility is obtained from measurements made in-situ. This approach is beneficial if the source is difficult to suspend, or if it contains nonlinear structural elements. Two formulations for an indirect source mobility are derived theoretically. The first requires measurement of velocities at or near to the contact points. The second involves measurement of remote velocities only. Neither of the methods requires excitation at the contacts in the coupled state. Numerical simulations of coupled beams are used to validate the two methods and investigate their accuracy and reliability with respect to typical measurement errors, such as background noise and inaccuracies in sensor positioning. It is found that these can have a significant effect on the methods considered. Several experimental case studies with single-contact and multi-contact sources are performed. The results confirm the validity of the two methods in principle, but highlight their sensitivity to experimental errors. In a representative case study with a fan unit, average errors range between ±5 dB and ±10 dB, with occasional errors of up to 30 dB. Y1 - 2015 U6 - https://doi.org/10.1016/j.jsv.2015.01.011 VL - 344 SP - 38 EP - 58 PB - Elsevier ER - TY - JOUR A1 - Höller, Christoph A1 - Gibbs, Barry M. T1 - Inverse Method to Obtain Blocked Forces of Vibrating Sound Sources in Buildings JF - Acta Acustica united with Acustica N2 - Vibrating sources, such as building service equipment, are major contributors to noise in buildings. In order to predict and subsequently reduce the sound pressure levels generated by these devices, it is necessary to first predict the total vibrational power injected by them into the supporting building structure. Whilst simplified methods are available for the calculation of the total power through all contacts, it would be beneficial to have more detailed knowledge of the dominant contact powers. For sources on low-mobility building elements, the contact powers are determined by the blocked force, along with the real part of the receiver mobility at each contact. This paper describes a novel inverse method to obtain the blocked forces at each contact. The method employs an instrumented reception plate, which is numerically modelled to allow optimum accelerometer positions to be selected, for any source and any location. The underlying theory and measurement procedure are described, and experimental validations are presented. Y1 - 2017 U6 - https://doi.org/10.3813/AAA.919092 VL - 103 IS - 4 SP - 639 EP - 649 PB - ingenta ER - TY - RPRT A1 - Mahn, Jeffrey A1 - Quirt, David A1 - Höller, Christoph A1 - Müller-Trapet, Markus T1 - Addendum to RR-335: sound transmission through Nail-Laminated Timber (NLT) assemblies N2 - This report is published as an addendum to NRC Research Report RR-335 “Apparent Sound Insulation in Cross-Laminated Timber Buildings." It is intended that this addendum will be merged with RR-335 in the future as a report for predicting the sound insulation in buildings using mass-timber constructions including NLT assemblies. This report presents the results from experimental studies of airborne sound transmission through assemblies of nail-laminated timber (NLT) with various linings. To put the data presented in this report in the proper context, this report begins with a brief explanation of calculation procedures to predict the apparent sound transmission class (ASTC) between adjacent spaces in a building whose structure is a combination of mass-timber assemblies such as nail-laminated timber (NLT) or cross-laminated timber (CLT) panels. Y1 - 2018 U6 - https://doi.org/10.4224/40000417 PB - National Research Council of Canada. Construction ER - TY - RPRT A1 - Höller, Christoph A1 - Müller-Trapet, Markus A1 - King, Frances A1 - Bradley, John T1 - Evaluation of the communication performance of the C4 chemical, biological, radiological and nuclear mask N2 - The Canadian Armed Forces (CAF) are using chemical, biological, radiological and nuclear (CBRN) general service respirators (GSRs) to defend against CBRN threats and hazards to protect personnel and ensure that they can safely and successfully carry out missions. The CBRN GSR currently in use by the CAF is the C4 respirator. The National Research Council of Canada assessed the communication performance of the C4 respirator. This report presents the results of the performance test. The method for assessing the communication performance used in this study was the NIOSH standard test procedure TEB-CBRN-APR-STP-0313 [1]. Other methods exist to evaluate the communication performance of respirators, but historically the NIOSH standard test procedure has been used. This report details the implementation and results of the tests conducted at the National Research Council of Canada, following the NIOSH standard test procedure. Y1 - 2018 U6 - https://doi.org/10.4224/23003981 ER - TY - RPRT A1 - Höller, Christoph A1 - Quirt, David A1 - Zeitler, Berndt A1 - Sabourin, Ivan T1 - Apparent sound insulation in cold-formed steel-framed buildings N2 - This Report presents the results from substantial experimental studies of sound transmission, together with an explanation of calculation procedures to predict the sound transmission between adjacent spaces in a building whose walls and floors have cold-formed steel (CFS) framing. This first edition contains mainly data for loadbearing steel framing formed from sheet steel with thickness from 1.37 mm (16 gauge) to 0.94 mm (20 gauge). Non-loadbearing CFS studs formed from thinner steel (nominally 0.54 mm) are also commonly used but these are not included in the data tables for sound transmission through wall assemblies in this Report. KW - concrete block walls KW - floor KW - sound insulation KW - sound transmission Y1 - 2017 U6 - https://doi.org/10.4224/23001843 PB - National Research Council of Canada. Construction ER - TY - THES A1 - Höller, Christoph T1 - Indirect methods of obtaining activity and mobility of structure-borne sound sources N2 - The work reported in this thesis focuses on the development of indirect methods for the experimental determination of important source parameters for structure-borne sound source characterization. In the first part of the thesis, matrix inversion methods for the determination of blocked forces are investigated. A simplified measurement procedure is proposed which offers a solution to the two major challenges to these methods, namely the acquisition of the FRF matrix and the problems associated with matrix inversion. The proposed procedure involves a free, low-mobility receiver plate which is modelled numerically. Calculated FRFs are used together with measured velocity responses to inversely determine the blocked forces. It is found that while the method has great potential in principle, in practice the accurate modelling of the receiver plate is of critical importance. In the second part of the thesis, three formulations are considered for the indirect determination of source mobility. Instead of performing measurements on the source in the free state, the source mobility is obtained from measurements made in-situ. This approach is beneficial if the source is difficult to suspend, or if it contains non-linear structural elements. The three formulations are validated numerically and experimentally. It is found that the methods can quantify source mobilities of single-contact and multi-contact sources from in-situ measurements. However, typical measurement errors, such as background noise or inaccuracies in sensor positioning, can significantly reduce the accuracy and reliability of the methods. In the final part of the thesis, the reception plate method for the determination of the power injected by a high-mobility source into a low-mobility receiver is reviewed, and a source substitution method proposed as a development. The substitution method circumvents problems that may arise when the reception plate method is applied to coupled walls and floors. A special focus of investigation is on the calibration of the receiver structure. It is found that the calibration can be performed with shaker or hammer, and that an average calibration factor may be used. The source substitution method thus offers a potential alternative to the reception plate method, for application with coupled plates. Y1 - 2013 UR - https://livrepository.liverpool.ac.uk/id/eprint/14233 N1 - University of Liverpool, Dissertation PB - University of Liverpool CY - Liverpool ER - TY - JOUR A1 - Bauhuber, Michael A1 - Mikrievskij, Andreas A1 - Lechner, Alfred T1 - Isotropic wet chemical etching of deep channels with optical surface quality in silicon with HNA based etching solutions JF - Materials Science in Semiconductor Processing N2 - Online trace analysis based on UV/Vis spectroscopy requires long detection paths. Therefore an isotropic wet etch process in silicon is developed to fabricate a 300 µm deep channel with low channel wall roughness for desired light guidance application. Four etchant compositions were compared in terms of etching rate, surface roughness and selectivity in a beaker process. The best fitting mixture was selected. To further increase the surface quality (bubble issue) a spin etcher tool is used for producing the channels. The dependence of homogeneity and defect density on media flux, and rotation velocity was investigated. Results show that high rotation velocity and high media flux lead to great defects in the channel wall. Through rotation of the wafer during etching, the etching rate of silicon rises compared to the beaker process due to the rapid removal of etch products and simultaneous supply of fresh etchant. After 38 min of etching, 300 µm deep semi-circular channels with high optical quality (Rq=10 nm±2 nm) over 3 m were produced. Y1 - 2013 UR - https://www.scopus.com/authid/detail.uri?authorId=22980567700#disabled U6 - https://doi.org/10.1016/j.mssp.2013.05.017 VL - 16 IS - 6 SP - 1428 EP - 1433 PB - Elsevier ER - TY - CHAP A1 - Höller, Christoph A1 - Zeitler, Berndt T1 - Laboratory study on flanking sound transmission in cold-formed steel-framed constructions T2 - Towards a quieter future : 45th International Congress and Exposition on Noise Control Engineering (Internoise 2016) : Hamburg, Germany, 21-24 August 2016, Vol 8 N2 - In a recent study at the National Research Council Canada, the sound transmission in cold-formed steel-framed constructions was investigated. The results of direct sound insulation tests of wall and floor assemblies were reported at EURONOISE 2015 and INTERNOISE 2015. This paper focuses on flanking sound transmission in cold-formed steel-framed constructions. A representative full-scale mock-up specimen was constructed in NRC’s 8-room flanking transmission facility. The specimen consists of four loadbearing walls with 152 mm deep steel studs, four non-loadbearing walls with 92mm deep steel studs, and four floor-ceiling assemblies consisting of steel joists and a composite steel deck with gypsum concrete. Measurements were conducted according to the indirect method described in ISO 10848. The individual flanking paths were measured by a sequence of transmission loss measurements in which other transmission paths were suppressed by shielding. For the bare specimen without linings, the sound transmission for horizontally adjacent rooms with continuous subfloors is dominated by the floor-floor flanking paths. Floor coverings or floor toppings are needed to meet the requirements in the National Building Code of Canada. This paper presents details of the measurements, highlights some of the results and discusses implications. Y1 - 2016 UR - https://www.researchgate.net/publication/307210627_Laboratory_Study_on_Flanking_Sound_Transmission_in_Cold-Formed_Steel-Framed_Constructions SP - 6238 EP - 6249 PB - Curran Associates Inc. ER - TY - JOUR A1 - Hutterer, Albert A1 - Bauhuber, Michael A1 - Hummel, Helmut A1 - Lechner, Alfred T1 - Real-time analyses of metal contaminations in the ppb-range JF - Solid State Phenomena N2 - In high-tech processing even smallest concentrations of metal ions in process media are of the utmost significance because they cause expensive production failures. Currently, cost-intensive equipment, special trained staff and time consuming analyses are necessary to detect these contaminations in order to avoid failures. The Centers of Excellence Nanochem and Sensorics at the University of Applied Sciences Regensburg (owner of patent PCT/EP2010/064833) and their industrial partner Micro-Epsilon GmbH are developing a new miniaturized measurement device which allows cost-effective real-time analysis of fluidic media for the first time. The system is fully automated and can be directly connected to wet-etch benches. Hence it allows continuous real-time surveillance of metal contaminations in the ppb-range through absorption spectroscopy in process media. For this purpose a very small sample amount of the process medium and a specific complexing agent are mixed together. This leads to an increase in the molar extinction coefficients and though even smallest contaminations become visible. The main parts of our development are the simulation of the different system components, their production and chemical analyses with the evaluation model. KW - Absorption KW - Analysis KW - Complexing Agent KW - Light Guidance KW - Liquid-Core Waveguide KW - Metal Ions KW - Online Measurement KW - Real-Time KW - Total Internal Reflection Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/SSP.195 VL - 195 SP - 269 EP - 273 PB - Trans Tech Publications ER - TY - CHAP A1 - Höller, Christoph A1 - Zeitler, Berndt A1 - Mahn, Jeffrey T1 - Direct sound transmission loss of heavy gauge steel stud walls T2 - Proceedings of Euronoise 2015 : 10th European Congress and Exposition on Noise Control Engineering : Maastricht, 31 May - 3 June 2015 Y1 - 2015 SP - 1121 EP - 1126 CY - Maastricht ER - TY - JOUR A1 - Jungnitsch, Georg T1 - Psychotherapeutische Verfahren bei chronischen Schmerzen JF - Fortschritte der Medizin N2 - Psychotherapeutic possibilities of treating chronic pain are employed in two different ways: Firstly in the form of psychotherapy in patients whose strategies for coping with pain and/or pain genesis can be described in terms of psychopathological categories; secondly in the form of pain-coping training, which is generally indicated in the presence of chronic pain, in particular that which is traditionally termed organic. With respect to their effectiveness in achieving, in the first place, mood change, and in the assessment of symptoms, the individual procedures have been well tested. The question as to differential indication, which can most readily be applied to the use of biofeedback, remains largely unanswered. T2 - Psychotherapeutic possibilities of treating chronic pain Y1 - 1990 UR - https://www.researchgate.net/publication/292930409_Psychotherapeutic_possibilities_of_treating_chronic_pain VL - 108 IS - 8 SP - 50 EP - 58 ER - TY - JOUR A1 - Peter, Daniel A1 - Dalmer, Michael A1 - Lechner, Alfred A1 - Gigler, Alexander M. A1 - Stark, Robert W. A1 - Bensch, Wolfgang T1 - Measurement of the mechanical stability of semiconductor line structures in drying liquids with application to pattern collapse JF - Journal of Micromechanics and Microengineering N2 - Enhanced particle removal processes in wet cleaning as well as drying processes of semiconductor wafers can cause significant lateral forces on surface structures. These forces, however, must not exceed the mechanical stability of structures on the wafer. Thus, a mechanical fracture test was used to assess the lateral mechanical stability of polysilicon line structures in relevant process liquids. The mechanical test was based on nanomanipulation with an atomic force microscope. Compared to fracture tests in air, data acquired in liquid isopropanol revealed a stabilizing effect. The differences in fracture forces can be attributed to a stress corrosion process on the surface. The size of the generated damage was influenced by the viscosity of the surrounding media. Y1 - 2011 U6 - https://doi.org/10.1088/0960-1317/21/2/025001 VL - 21 IS - 2 PB - IOP Science ER - TY - CHAP A1 - Peter, Daniel A1 - Dalmer, Michael A1 - Lotnyk, Andriy A1 - Kienle, Lorenz A1 - Lechner, Alfred A1 - Bensch, Wolfgang T1 - Solid bridging during pattern collapse (stiction) studied on silicon nanoparticles T2 - MRS Online Proceedings Library N2 - The high surface to volume ratio of nanoparticles allows a detailed experimental study of the surface phenomena associated with solid bridging. Besides bulk analyses, the local view on the structure and composition via HRTEM is particularly essential. 50 nm core shell particles consisting of a silicon (Si) core and a SiO2 shell were used as model system to understand surface phenomena appearing for Si-based nanostructures. Evaporative drying from de-ionized water shows the most significant bridging effect based on SiO2. There is only a localized deposition of oxides between the particles during the drying process and no overall oxidation. For the deposition material, silicates are the most likely candidates. Y1 - 2011 U6 - https://doi.org/10.1557/opl.2011.397 VL - 1299 SP - 191 EP - 196 PB - Springer Nature ER - TY - CHAP A1 - Zeitler, Berndt A1 - Höller, Christoph A1 - Mahn, Jeffrey T1 - Empirical model of direct sound transmission through lightweight wood-framed construction T2 - Implementing noise control technology : 44th International Congress and Exposition on Noise Control Engineering (Internoise 2015) : San Francisco, California, USA, 9 - 12 August 2015 N2 - Tools to predict sound transmission through building elements are beneficial from both amarketing and a research standpoint. Prediction models can assist with the optimization ofelement performance and often reduce both cost and time in projects. However, the morephysical phenomena are to be included in the model, the more input data that is needed,which in some cases can be quite time-consuming and costly to collect. A balance is neededbetween the input and modeling effort and the output, which is usually delivered in onethird octave frequency bands or single number ratings. Many different types of models arecommonly used, including analytical, numerical, and empirical are used, all of which haveadvantages and disadvantages. In this paper, the latter type is presented using a set ofphysical properties of lightweight wood elements, and the errors made in the prediction arequantified. The disadvantage of empirical compared to analytical modeling is that thephysical phenomena are more difficult to identify. The advantage is often the simplicityand accuracy of the prediction results. Y1 - 2015 UR - https://www.researchgate.net/publication/281065914_Empirical_Model_of_Direct_Sound_Transmission_through_Lightweight_Wood-Framed_Construction PB - Curran CY - Red Hook, NY ER - TY - CHAP A1 - Zeitler, Berndt A1 - Mahn, Jeffrey A1 - Sabourin, Ivan A1 - Höller, Christoph A1 - Schoenwald, Stefan T1 - Apparent airborne sound insulation of hybrid wood-concrete masonry assemblies T2 - Euronoise 2015 : 10th European Congress and Exposition on Noise Control Engineering : Maastricht, 31 May - 3 June 2015 N2 - As part of a research project to develop design solutions for concrete-masonry buildings for the Canadian market, the apparent sound insulation performance of hybrid assemblies with concrete masonry walls and wood joist floors was evaluated. In this paper, the effect of junction coupling is investigated in an ISO 15712 flanking prediction context. Airborne flanking path data predicted according to ISO 15712 are compared to data measured using the indirect ISO 10848 shielding method. Recommendations are made on how appropriate the application of ISO 15712 is for this type of hybrid assembly. Y1 - 2015 UR - https://www.conforg.fr/euronoise2015/proceedings/data/articles/000436.pdf SP - 2515 EP - 2520 CY - Maastricht ER - TY - JOUR A1 - Dams, Florian A1 - Navitski, Aliaksandr A1 - Prommesberger, Christian A1 - Serbun, Pavel A1 - Langer, Christoph A1 - Müller, Günter A1 - Schreiner, Rupert T1 - Homogeneous Field Emission Cathodes With Precisely Adjustable Geometry Fabricated by Silicon Technology JF - IEEE Transactions on Electron Devices N2 - Silicon-based cathodes with precisely aligned field emitter arrays of sharp tips applicable for miniaturized electron sources were successfully fabricated and characterized. This was made possible by an improved fabrication process using wet thermal oxidation, wet etching, and reactive-ion etching steps with adjustable anisotropy. As substrate materials, both p-doped silicon and n-doped silicon were used. The cathode chips contain about 3 × 10 5 Si tips/cm 2 in a triangular array with tip heights of 2.5 μm, tip radii of less than 30 nm, and spacing of 20 μm. Well-aligned field emission (FE) and excellent homogeneity from all tips (i.e., 100% efficiency) and maximum stable currents of typically 0.1 μA (0.6 μA) for p (n)-type Si were reproducibly achieved. The current-voltage characteristics of the p-Si tips exhibit the expected saturation at around 10 nA with around ten times better current stability, whereas the n-Si tips show the usual Fowler-Nordheim behavior. Additional coating of the Si tips with 5-nm Cr and 10-nm Au layers resulted in improved stability and at least five times higher average FE current limits (about 3 μA) at about 30% higher operation voltage. KW - cathodes KW - electron field emission KW - elemental semiconductors KW - Field emission (FE) cathodes KW - field emitter array (FEA) KW - miniaturized electron sources KW - oxidation KW - silicon KW - silicon tips KW - sputter etching Y1 - 2012 U6 - https://doi.org/10.1109/TED.2012.2206598 SN - 0018-9383 SN - 1557-9646 VL - 59 IS - 10 SP - 2832 EP - 2837 PB - IEEE ER - TY - JOUR A1 - Tan, Pi Lin A1 - Yeap, Guan Yeow A1 - Chow, Wen Shyang A1 - Schreiner, Rupert A1 - Cheong, Kuan Yew T1 - Effect of Thickness of Porphyrin on Electrical Properties of Organic Devices JF - Advanced Materials Research (AMR) N2 - The study on electrical properties for both 2,3,7,8,12,13,17,18-octaethyl-21,23H-porphine Cu (II) (Cu-porphyrin) and 2,3,7,8,12,13,17,18-octaethyl-21,23H-porphine (porphyrin) thin film, which were fabricated using spin coating method was conducted. Porphyrins were diluted with chloroform of various concentrations (0.05 mg/ml, 0.1 mg/ml, 0.5 mg/ml, 2.0 mg/ml and 3.0 mg/ml). The solution was spin coated on top of glass substrates. A layer of aluminum was evaporated on top of the organic thin film through thermal evaporation and shadow mask was placed on top of the organic thin film where two electrodes with a gap of 50 μm were formed. Surface morphology of the organic thin film was observed by scanning electron microscope (SEM) and profilometer. Different concentrations of organic solutions greatly affected the molecular packing and arrangement order of the organic thin film and thickness of the organic layer and eventually affected electrical properties of the devices. KW - Porphyrin KW - Electrical Properties KW - Spin Coating Y1 - 2014 U6 - https://doi.org/10.4028/www.scientific.net/AMR.1024.381 SN - 1662-8985 SN - 1022-6680 VL - 1024 SP - 381 EP - 384 PB - Trans Tech Publications Ltd. CY - Baech ER - TY - JOUR A1 - Langer, Christoph A1 - Berndt, Dominik A1 - Schreiner, Rupert T1 - Sensitivity of thermal conductivity vacuum gauges for constant current and constant temperature operation JF - Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics N2 - To optimize the measurement range of thermal conductivity vacuum gauges, an expression for the sensitivity is required that takes into account all geometrical, material-specific, and operating parameters. Therefore, equations of the sensor output signal as a function of the pressure for the constant current and the constant temperature mode have been developed analytically. Based on these equations, the sensitivity of the vacuum gauge and its influencing parameters was investigated and discussed. For comparable conditions, the constant temperature operation shows a significantly higher sensitivity for high pressures, while the constant current operation shows higher sensitivity at low pressures. The sensitivity in both the constant current and the constant temperature mode depends on the ratio of the filament surface area and the parasitic thermal conductance. In addition, for the constant current operation, the sensitivity also depends on the current value and the temperature coefficient of the filament resistor. For the constant temperature operation, the sensitivity additionally depends on the distance of the filament and the reference plane. However, to extend the measurement range of a thermal conductivity vacuum gauge toward low pressures, a reduction of the parasitic thermal conductance is mandatory for both the constant current and the constant temperature mode. Y1 - 2022 U6 - https://doi.org/10.1116/6.0001964 VL - 40 IS - 5 PB - AIP Publishing ER - TY - CHAP A1 - Dams, Florian A1 - Prommesberger, Christian A1 - Schreiner, Rupert T1 - Fabrication process of silicon-tip-arrays for field emission applications T2 - 24th International Vacuum Nanoelectronics Conference (IVNC), 2011 : 18 - 22 July 2011, Historische Stadthalle Wuppertal, Germany N2 - A micromachined process to assemble homogeneous and reproducible tip arrays for field emission applications is developed and characterized. As substrate material p- as well as n-doped silicon is used. Lateral position of the tips is defined by structuring silicon dioxide to discs in a photolithographic process. Vertical structure of the tips is defined by a combination of RIE dry etching with controlled anisotropy and thermally oxidization of silicon in order to sharpen the tips. Hence field emitter arrays (FEAs) can be assembled both as bare and coated cathodes. To assemble field emission diodes, this fabrication process allows placing a metal anode in a micrometer order distance to the tips by a self-aligning procedure. The anode is placed in an evaporation process whereupon sharpening oxide is used as isolator between anode and cathode. Electrical characterization of the cathodes showed very good homogeneity, well alignment and stability over time of emission current from all tips (i.e. 100% efficiency). KW - elemental semiconductors KW - etching KW - fabrication KW - field emission KW - field emitter arrays KW - homogeneity KW - micromachining KW - oxidation, silicon KW - silicon technology Y1 - 2011 UR - https://ieeexplore.ieee.org/document/6004556?arnumber=6004556 SN - 978-3-00-035081-8 SN - 978-1-4577-1243-2 SN - 2380-6311 SN - 2164-2370 SP - 49 EP - 50 PB - IEEE ER - TY - INPR A1 - Rück, Thomas A1 - Müller, Max A1 - Jobst, Simon A1 - Weigl, Stefan A1 - Pangerl, Jonas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - Digital Twin of a Photoacoustic Trace Gas Sensor for Monitoring Methane in Complex Gas Compositions N2 - The digitalization of industrial processes requires smart sensor systems. Photoacoustic spectroscopy is well suited for this purpose as it allows for small-sized and low-cost trace gas analysis. However, the method is susceptible to changes in measurement conditions and standard calibration routines often fail to correct for all changes. We therefore created a Digital Twin (DT) of a photoacoustic trace gas sensor for methane and evaluated it regarding variations in gas composition (CH4, N2, O2, CO2, H2O), temperature and pressure. With a mean absolute percentage error of 0.8 % the accuracy of the sensor after DT compensation significantly exceeds the 24 % achieved based on standard calibration in nitrogen. For the first time, we can fully analytically compute the photoacoustic signal under moderate ambient conditions with an error in the ppbV range by taking a holistic approach. Assuming knowledge of the underlying energy transfer processes, the model of this Digital Twin can be adapted to any microphone based photoacoustic sensor for monitoring any analyte species. Y1 - 2022 U6 - https://doi.org/10.2139/ssrn.4215170 PB - Elsevier / SSRN ER - TY - JOUR A1 - Schüz, B. A1 - Dräger, D. A1 - Richter, Stefanie A1 - Kummer, K. A1 - Kuhlmey, Adelheid A1 - Tesch-Römer, C. T1 - Autonomie trotz Multimorbidität im Alter – Der Berliner Forschungsverbund AMA JF - Zeitschrift für Gerontologie und Geriatrie N2 - Mit zunehmendem Alter steigt der Anteil mehrfach erkrankter Menschen und immer mehr Menschen erreichen ein sehr hohes Lebensalter. Trotz des medizinischen Fortschritts und verbesserter Lebenslagen müssen viele alte Menschen körperliche, psychische und soziale Einschränkungen bewältigen. Es ist eine große gesundheits- und sozialpolitische Herausforderung, diese alten Frauen und Männer mit gesundheitlichen Beeinträchtigungen in ihrem Bestreben nach einer weitestgehend autonomen Lebensgestaltung zu unterstützen und zu stärken. Vor diesem Hintergrund widmete sich der Forschungsverbund „Autonomie trotz Multimorbidität im Alter“ (AMA I) der Leitfrage, inwieweit eine selbstbestimmte Lebensgestaltung alter mehrfach erkrankter Menschen erhalten werden kann. Um der Vielfalt der Lebenswelten älterer Menschen gerecht zu werden, wurden im Alltag wenig eingeschränkte und pflegebedürftige sowie kognitiv beeinträchtigte Personen in die Untersuchung einbezogen. Darunter waren Frauen und Männer, die noch im eigenen Haushalt und solche die im Pflegeheim lebten. Im Fokus der Untersuchungen standen die Ressourcen, die den alten Menschen in ihrer jeweiligen Lebenssituation zur Verfügung standen und die Frage, wie diese gestärkt werden können. Der Beitrag präsentiert Ergebnisse zu dieser Forschungsfrage aus der 1. Förderphase des AMA-Verbundes. Darauf aufbauend werden in einer 2. Förderphase (2011–2013, AMA II) nunmehr nachhaltige praxisrelevante Interventionen zur Mobilisierung von autonomierelevanten Ressourcen mehrfach erkrankter alter Menschen entwickelt und auf ihre Praxistauglichkeit getestet. Y1 - 2011 UR - https://www.springermedizin.de/autonomie-trotz-multimorbiditaet-im-alter-der-berliner-forschung/8375302 IS - Sonderheft 2 SP - 9 EP - 25 PB - Springer ER - TY - JOUR A1 - Scheidt-Nave, Christa A1 - Richter, Stefanie A1 - Fuchs, Judith A1 - Kuhlmey, Adelheid T1 - Herausforderungen an die Gesundheitsforschung für eine alternde Gesellschaft am Beispiel "Multimorbidität" JF - Bundesgesundheitsblatt – Gesundheitsforschung – Gesundheitsschutz N2 - Indem ein wachsender Anteil der Bevölkerung ein hohes Alter erreicht, ändern sich Krankheitsspektrum und Versorgungsbedarf. Besondere Herausforderungen für das Gesundheitssystem ergeben sich durch Mehrfacherkrankung (Multimorbidität) älterer Menschen. Im Gegensatz zu krankheitsspezifischen Endpunkten treten Funktion im Alltag und subjektive Ergebnisdimensionen wie selbstbestimmte Lebensführung (Autonomie), soziale Teilhabe und Lebensqualität als Präventions- und Behandlungsziel in den Vordergrund. Die Gesundheitsforschung hat die Aufgabe, auf die Bedürfnisse spezifischer Zielgruppen alter Menschen abgestimmte Präventions- und Versorgungsmodelle zu entwickeln. Entscheidend dabei ist die Stärkung von personalen, sozialen und organisatorischen Ressourcen. Voraussetzung hierfür sind genaue Kenntnisse zur Entwicklung und zum Verlauf des Krankheitsgeschehens und zu zentralen Einflussfaktoren auf der Grundlage epidemiologischer Beobachtungsstudien. Gezielte Maßnahmen sind in Interventions- und Evaluationsstudien auf Wirksamkeit, Wirkung und Wirtschaftlichkeit zu überprüfen. Der vom Bundesministerium für Bildung und Forschung (BMBF) initiierte Förderungsschwerpunkt „Gesundheit im Alter“ fördert insgesamt sechs Forschungsverbünde zum Thema Multimorbidität, die hier kurz vorgestellt werden. Y1 - 2010 UR - https://edoc.rki.de/handle/176904/857 VL - 53 IS - 5 SP - 441 EP - 450 ER - TY - CHAP A1 - Richter, Stefanie A1 - Kuhlmey, Adelheid ED - Tesch-Römer, Clemens T1 - Alter, Altern und Gesundheit als Herausforderung für Forschung in Verbundzusammenhängen BT - Ressourcen für Selbstständigkeit und Selbstbestimmung im Alter T2 - Autonomie trotz Multimorbidität N2 - Angesichts der zunehmenden Alterung der Bevölkerung wird die Frage nach dem Erhalt von Autonomie alter Menschen trotz Mehrfacherkrankungen immer brisanter. Die Beiträge in diesem Band beschäftigen sich mit der Frage, wie alte Menschen trotz Multimorbidität und Gesundheitseinbußen autonom und selbstbestimmt leben können.Die Autoren präsentieren Befunde, die den Entwicklungsstand altersangemessener, zielgruppenspezifischer Instrumente sowie Zugangswege zur Erfassung von Multimorbidität und Autonomie aufzeigen. Weitere Beiträge thematisieren u.a. personale, preofessionelle und sozial-räumliche Faktoren, die Autonomie angesichts von Multimorbidität unterstützen und als Ressourcen wirken. Wie diese Ressourcen einzeln und in ihrer Wechselbeziehung zum Autonomieerhalt beitragen, wie sie erhalten und gefördert werden können, wird beispielhaft im Kontext komplexer autonomierelevanter Gesundheitsprobleme wie Schmerz, Sturz- und Schlafstörungen gezeigt. Y1 - 2012 UR - https://www.hogrefe.com/de/shop/autonomie-trotz-multimorbiditaet-66162.html SP - 203 EP - 220 PB - Hogrefe ER - TY - JOUR A1 - Richter, Stefanie A1 - Flick, Uwe A1 - Kuhlmey, Adelheid T1 - Alter(n) und Gesundheit. Chancen und Hürden einer disziplinenübergreifenden Zusammenarbeit JF - G+G Wissenschaft N2 - Eine umfassende theoretische und empirische Auseinandersetzung mit Fragestellungen und Problemen des Alter(n)s setzt eine inter- beziehungsweise transdisziplinäre Wissenschaftspraxis voraus. Deren Realisierung stößt allerdings immer wieder an Grenzen, denn eine disziplinenübergreifende Zusammenarbeit steht einem Wissenschaftssystem gegenüber, dem Ausdifferenzierung, Abgrenzung, Spezialisierung und die Bildung disziplinenspezifischer Kulturen anhaften. Hinzu kommen Publikationsstrukturen mit den Regeln eines akademischen Karrieremarktes, der eine enge (sub)disziplinäre Fokussierung belohnt. Der Beitrag beleuchtet die Probleme und Lösungsstrategien der disziplinenübergreifenden Zusammenarbeit in der Gerontologie am Beispiel des Forschungsverbundes "Gesundheit im Alter" KW - Gerontologie KW - Gesundheit im Alter KW - Interdisziplinarität KW - Transdisziplinarität KW - Wissensintegration Y1 - 2011 UR - https://www.wido.de/fileadmin/Dateien/Dokumente/Publikationen_Produkte/GGW/wido_ggw_0211_richter_et_al.pdf VL - 11 IS - 2 SP - 7 EP - 15 PB - GGW ER - TY - CHAP A1 - Müller, Max A1 - Rück, Thomas A1 - Jobst, Simon A1 - Pangerl, Jonas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - Creating a Digital Twin of a Photoacoustic Gas Sensor for Methane Detection in Complex Gas Matrices T2 - Proceedings Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES): 11–15 July 2022, Vancouver, British Columbia, Canada N2 - We present the calculation results from a digital twin (DT) of our photoacoustic (PA) sensor for methane detection, regarding gas composition, temperature and pressure variations. Y1 - 2022 SN - 978-1-957171-10-4 U6 - https://doi.org/10.1364/LACSEA.2022.LW4D.2 PB - Optica Publishing Group ER - TY - JOUR A1 - Peter, Daniel A1 - Holsteyns, Frank A1 - Dalmer, Michael A1 - Kruwinus, Hans A1 - Lechner, Alfred A1 - Bensch, Wolfgang T1 - A Study on the Structure Collapse Mechanisms for High Aspect Ratio Structures with Application to Clean Processing JF - ECS Meeting Abstracts Y1 - 2009 U6 - https://doi.org/10.1149/MA2009-02/24/2084 VL - MA2009-02 IS - 24 PB - IOP Science ER - TY - CHAP A1 - Skornia, Christoph ED - Lang, Michael ED - Löhr, Hans ED - Angermeier, Daniel T1 - Sicherheit in der Cloud T2 - IT-Sicherheit Y1 - 2022 SN - 978-3-446-47223-5 U6 - https://doi.org/10.3139/9783446473478.015 SP - 263 EP - 278 PB - Hanser CY - München ER - TY - CHAP A1 - Schreiner, Rupert A1 - Mulot, M. A1 - Wiedmann, Jörg A1 - Coenning, W. A1 - Porsche, J. A1 - Gentner, Jean-Louis A1 - Berroth, Manfred A1 - Scholz, Ferdinand A1 - Schwizer, H. T1 - Dynamic measurements on narrow linewidth complex coupled 1.55 μm DFB lasers with gain and index grating in antiphase T2 - Conference Proceedings. Eleventh International Conference on Indium Phosphide and Related Materials (IPRM'99), 16-20 May 1999, Davos, Switzerland N2 - We report on dynamic measurements on antiphase complex coupled 1.55 /spl mu/m DFB lasers. The antiphase complex coupling mechanism is realized by periodically etching the active layer and quarternary InGaAsP overgrowth. This new fabrication approach results in very narrow linewidths measured on devices with rather short resonator lengths. The minimum linewidth for a 375 /spl mu/m long ridge waveguide laser was only 250 kHz at an optical output power of 4 mW. The RC-limited 3dB-bandwidth for those devices was /spl sim/6 GHz. Using circuit model corrections, the intrinsic bandwidth limitation of those lasers was found to be 17.4 GHz. KW - Waveguide lasers KW - Optical resonators KW - Optical waveguides KW - Laser modes KW - Optical coupling KW - Etching KW - Optical device fabrication KW - Length measurement KW - Power lasers KW - Power generation Y1 - 1999 SN - 0-7803-5562-8 U6 - https://doi.org/10.1109/ICIPRM.1999.773626 SP - 25 EP - 28 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Schreiner, Rupert A1 - Naegele, Peter A1 - Koerbl, Michael A1 - Groening, Albert A1 - Gentner, Jean-Louis A1 - Schweizer, Heinz C. ED - Mirin, Richard P. ED - Menoni, Carmen S. T1 - Monolithically integrated tunable laterally-coupled distributed feedback lasers with self-aligned Ti/Pt/Au ohmic contacts T2 - Proceedings Volume 4871, Semiconductor Lasers and Optical Amplifiers for Lightwave Communication SystemsSemiconductor Lasers and Optical Amplifiers for Lightwave Communication Systems N2 - We present a new method for fabrication of tunable InGaAsP-InP single mode lasers without epitaxial overgrowth. These devices show the advantage of a considerably simplified fabrication process compared to conventional tunable laser types. The lasers comprise an active Bragg reflector integrated with an uncorrugated separately pumped gain region. To overcome the extensive and expensive overgrowth step we realized a surface grating on both sides of the ridge mesa, which provides DFB operation. By adjusting the current through the Bragg reflector, the wavelength can be tuned between 1590.8 nm and 1595.2 nm. A maximum of 11 wavelength channels with an average spacing of ~0.5 nm and a constant optical output power of ~0.5 mW are addressable. Y1 - 2002 U6 - https://doi.org/10.1117/12.457281 PB - SPIE ER - TY - JOUR A1 - Cheong, Kuan Yew A1 - Aw, Kean A1 - Karimov, Khasan S. A1 - Zhao, Feng A1 - Mahroof-Tahir, Mohammad A1 - Schreiner, Rupert T1 - Advances in Smart Materials and Applications JF - Advances in Materials Science and Engineering N2 - This is one of a series of special issues published in Advances in Materials Science and Engineering, focusing on the latest advances of smart materials and their applications. Evolution of engineering materials is strongly depending on the growing transformation of complexity in engineering products. New materials being designed are required to provide specific properties and demonstrate certain functional characteristics by manipulating their dimension, chemistry, and structure through various advanced technologies. Therefore, “smartness” of a material has become the topic of interest. Properties of smart materials may change accordingly to the applied external stimuli. Under the direction of the editorial team, we showcase advances of organic and inorganic based smart materials and their applications in areas of specific interest such as energy, environment, and health. A total of 9 articles are published in this special issue. Six articles are focused on production, synthesis, and optimization of smart materials; and the remaining are dedicated to application of smart materials. Y1 - 2014 U6 - https://doi.org/10.1155/2014/517342 PB - Hindawi ER - TY - CHAP A1 - Saravanan, Brem Kumar A1 - Gerlach, Philipp A1 - Peschke, Martin A1 - Knoedl, Thomas A1 - Schreiner, Rupert A1 - Hanke, Christian A1 - Stegmueller, Bernhard T1 - Integrated DFB laser electro-absorption modulator based on identical MQW-double stack active layer for high-speed modulation beyond 10 GBIT/S T2 - 16th IPRM. 2004 International Conference on Indium Phosphide and Related Materials, 31 May - 04 June 2004, Kagoshima, Japan N2 - Integrated DFBLD-EAM-SOA devices utilizing an identical MQW active region have been realized in the AlGaInAs/InP material system. A fiber-coupled optical power of >6 mW with a 10 dB static extinction, 44 dB SMSR single-mode spectrum and a 3 dBe cutoff frequency of 25 GHz was measured. KW - Quantum well devices KW - Fiber lasers KW - Indium phosphide KW - Optical materials KW - Optical fiber devices KW - High speed optical techniques KW - Optical modulation KW - Cutoff frequency KW - Power measurement KW - Frequency measurement Y1 - 2004 SN - 0-7803-8595-0 U6 - https://doi.org/10.1109/ICIPRM.2004.1442656 SP - 236 EP - 238 PB - IEEE ER - TY - JOUR A1 - Zahner, Th A1 - Schreiner, Rupert A1 - Stierstorfer, R. A1 - Kus, O. A1 - Li, S. T. A1 - Roessler, R. A1 - Pedarnig, J. D. A1 - Bäuerle, D. A1 - Lengfellner, H. T1 - Off-diagonal Seebeck effect and anisotropic thermopower in Bi2Sr2CaCu2O8 thin films JF - Europhysics Letters N2 - The anisotropy ΔS of the thermopower in thin films of the high-Tc superconductor Bi2Sr2CaCu2O8 is investigated using off–c-axis epitaxial film growth and the off-diagonal Seebeck effect. The measurements represent a new method for the investigation of anisotropic transport properties in solids, taking advantage of the availability of oriented grown crystalline thin films instead of using bulk crystals. First results for the temperature dependence ΔS(T) in Bi2Sr2CaCu2O8 thin films are presented and described within a two-band model. Subjecting the films to heat treatments in different gases at relatively low temperatures, ΔS could reversibly be changed in a wide range. Y1 - 1997 U6 - https://doi.org/10.1209/epl/i1997-00521-4 VL - 40 IS - 6 SP - 673 EP - 678 PB - IOP Sciences ER - TY - CHAP A1 - Knodl, Thomas A1 - Hanke, Christian A1 - Saravanan, Brem Kumar A1 - Peschke, Martin A1 - Schreiner, Rupert A1 - Stegmuller, Bernhard ED - Righini, Giancarlo C. ED - Honkanen, Seppo T1 - Integrated 1.3-μm InGaAlAs-InP laser-modulator with double-stack MQW layer structure T2 - Proceedings Volume 5451, Integrated Optics and Photonic Integrated Circuits N2 - We present first experimental results of the successful transfer of our monolithic integrated double-stack multi quantum well laser-modulator approach from the traditional InGaAsP/InP to the more promising InGaAlAs/InP material system. In continuous wave operation at room temperature, the devices achieved threshold currents of <21 mA, fiber coupled optical power levels up to 570 μW and static extinction ratios in the range of 15 dB/V. The measured small-signal modulation bandwidth of about 10 GHz is capacitance limited due to a conservative device layout. Y1 - 2004 U6 - https://doi.org/10.1117/12.544610 PB - SPIE ER - TY - CHAP A1 - Schreiner, Rupert A1 - Grabeldinger, H. A1 - Wiedmann, J. A1 - Wunstel, K. A1 - Porsche, J. A1 - Scholz, Ferdinand A1 - Schweizer, H. T1 - Complex coupled 1.55 mu m tunable super-grating DFB lasers and photonic filters T2 - Compound semiconductors 1999 : proceedings of the Twenty-Sixth International Symposium on Compound Semiconductors held in Berlin, Germany, 22 - 26 August 1999 N2 - We report on the investigation and realization of photonic filters based on the combination of fractional compositions of a few basic grating periods. Using a minimum set of two basic periods Lambda(1) and Lambda(2) we demonstrate comb-like few mode photonic band gap structures with arbitrary numbers of bands and frequency spacing between the bands. Optically integrated filters of different comb periods result in switchable wavelength filters for channel selection in WDM applications. Y1 - 2000 UR - https://www.researchgate.net/publication/296464112_Complex_coupled_155_mu_m_tunable_super-grating_DFB_lasers_and_photonic_filters SN - 0-7503-0704-8 PB - Inst. of Physics Publ. CY - Bristol [u.a.] ER - TY - CHAP A1 - Schreiner, Rupert A1 - Schweizer, Heinz C. T1 - High frequency operation of 1.57 μm laterally gain coupled DFB lasers with self aligned ohmic contacts and nickel surface gratings T2 - IEEE 18th International Semiconductor Laser Conference; 29 Sept.-3 Oct. 2002, Garmisch, Germany N2 - Laterally coupled DFB lasers with self-aligned ohmic contacts show the advantage of a, considerably simplified fabrication process. Side-mode-suppresion-ratios up to 55 dB and 3 dB-bandwidths beyond 15 GHz were obtained for these devices. KW - Frequency KW - Optical coupling KW - Distributed feedback devices KW - Etching KW - Laser theory KW - Laser modes KW - Nickel KW - Laser feedback KW - Waveguide lasers KW - Laser noise Y1 - 2002 SN - 0-7803-7598-X U6 - https://doi.org/10.1109/ISLC.2002.1041099 SP - 21 EP - 22 PB - IEEE ER - TY - INPR A1 - Müller, Max A1 - Weigl, Stefan A1 - Müller-Williams, Jennifer A1 - Lindauer, Matthias A1 - Rück, Thomas A1 - Jobst, Simon A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - Ambient methane monitoring at Hohenpeißenberg utilizing photoacoustic spectroscopy and cavity ring down spectroscopy N2 - With an atmospheric concentration of approximately 2000 parts per billion (ppbV, 10−9) methane (CH4) is the second most abundant greenhouse gas (GHG) in the atmosphere after carbon dioxide (CO2). The task of long-term and spatially resolved GHG monitoring to verify whether climate policy actions are effective, is becoming more crucial as climate change progresses. In this paper we report the CH4 concentration readings of our photoacoustic (PA) sensor over a five day period at Hohenpeißenberg, Germany. As a reference device a calibrated cavity ringdown spectrometer Picarro G2301 from the meteorological observatory was employed. Trace gas measurements with photoacoustic instruments promise to provide low detection limits at comparably low costs. However, PA devices are often susceptible to cross-sensitivities related to environmental influences. The obtained results show that relaxation effects due to fluctuating environmental conditions, e.g. ambient humidity, are a non-negligible factor in PA sensor systems. Applying algorithm compensation techniques, which are capable of calculating the influence of relaxational effects on the photoacoustic signal, increase the accuracy of the photoacoustic sensor significantly. With an average relative deviation of 1.11 % from the G2301, the photoacoustic sensor shows good agreement with the reference instrument. Y1 - 2023 U6 - https://doi.org/10.5194/egusphere-2023-1010 ER - TY - JOUR A1 - Denk, Alexander A1 - Schüngel, Verena A1 - Weber, Stefka A1 - Kaulen, Corinna T1 - Heimexperiment und Online-Dokumentation : Praktische Ausbildung in den MINT-Fächern JF - Chemie in unserer Zeit N2 - Die Anleitung zum selbständigen wissenschaftlichen Arbeiten ist ein fester Bestandteil in der naturwissenschaftlichen Ausbildung, der im letzten Jahr durch Distanz‐Unterricht stark vernachlässigt wurde. Wir stellen hier einen Ansatz vor, bei dem Studierende zu Hause mit Alltagsgegenständen in Teilaufgaben die Aktivität von Hefe in Abhängigkeit von Temperatur und Substrat untersucht haben. Die Ergebnisse des gesamten Kurses wurden in einem Google‐Dokument gesammelt und zentral ausgewertet. Gleichzeitig fand ein Erfahrungsaustausch unter den Lernenden statt und Probleme konnten öffentlich diskutiert werden. Darüber hinaus wurden grundlegende Fähigkeiten wie Beobachten, Protokollieren und detailgetreues Berichten geübt. Die Online‐Dokumentation und ‐Erfassung der Ergebnisse stellt somit eine geeignete Methode dar, die Durchführung von Heimexperimenten zu aktivieren und zu koordinieren. N2 - Instruction in independent scientific work is an integral part of science education that has been severely neglected in the past year due to distance teaching. Here, we present an approach in which students used everyday objects to investigate the activity of yeast as a function of temperature and substrate in subtasks at home. The results of the whole course were collected in a Google document and centrally analyzed. At the same time, the learners were asked to upload their experimental reports with photos to a wiki. This enabled an exchange of experiences among the learners and problems could be discussed publicly. Furthermore, basic skills like observing, logging and detailed reporting were practiced. Online documentation and recording of results is thus a suitable method to activate and coordinate the implementation of home experiments. Y1 - 2023 U6 - https://doi.org/10.1002/ciuz.202100018 PB - Wiley-VCH ER -