TY - JOUR A1 - Steindl, Florian R. A1 - Mittermayr, Florian A1 - Sakoparnig, Marlene A1 - Juhart, Joachim A1 - Briendl, Lukas G. A1 - Lindlar, Benedikt A1 - Ukrainczyk, Neven A1 - Dietzel, Martin A1 - Kusterle, Wolfgang A1 - Galan, Isabel T1 - On the porosity of low-clinker shotcrete and accelerated pastes JF - Construction and Building Materials N2 - Although the number and size of interconnected pores have been identified as the most important aspects of concrete microstructure, comprehensive datasets on shotcrete porosity and pore size distributions are still scarce and their key controls are poorly investigated. In this study we investigate the effects of the spraying process, setting accelerator addition and mix design on the microstructure of real-scale dry- and wet-mix shotcrete and hand-mixed and sprayed accelerated pastes. A newly proposed deconvolution analysis of the pore size distributions, measured by mercury intrusion porosimetry, offers increased precision in determining the critical and median pore diameter parameters. In total >50 samples were analysed. Results show that the dry-mix shotcrete exhibits a shift towards coarser pore sizes (∼100–1 μm) than wet-mix shotcrete. Combinations of different supplementary cementitious materials are favourable for producing wet-mix shotcretes with refined pore structures. The addition of setting accelerators, up to 10 wt-% of binder mass, and the spraying process cause systematic variations in the pore volume and pore structure of (sprayed) paste and shotcrete. KW - Porosity KW - Shotcrete KW - Mercury Intrusion KW - Durability KW - SCMs Y1 - 2023 U6 - https://doi.org/10.1016/j.conbuildmat.2023.130461 SN - 0950-0618 VL - 368 PB - Elsevier CY - 14 ER - TY - CHAP A1 - Thumann, Maria A1 - Juhart, Joachim A1 - Röck, Rudolf A1 - Saxer, Andreas A1 - Galan, Isabel A1 - Mittermayr, Florian A1 - Kusterle, Wolfgang T1 - Entwicklung neuer, dauerhafter und nachhaltiger Spritzbetone T2 - Kolloquium Forschung & Entwicklung für Zement und Beton 2018 Y1 - 2018 UR - https://zement.at/downloads/downloads_2018/Kolloquium_Kurzbeitraege_2018_neu.pdf SP - 65 EP - 69 ER - TY - CHAP A1 - Juhart, Joachim A1 - Briendl, Lukas G. A1 - Mittermayr, Florian A1 - Röck, Rudolf A1 - Thumann, Maria A1 - Kusterle, Wolfgang T1 - Mischungsentwicklung von nachhaltigem Spritzbeton mit kombinierten Zusatzstoffen T2 - Beton Graz '18 : 4. Grazer Betonkolloquium : 20./21. September 2018 N2 - Spritzbeton ist nachhaltig, wenn er sowohl umweltfreundlich als auch dauerhaft ist. Traditionelle Mischungszusammensetzungen für Spritzbeton enthalten einen hohen Anteil an fein gemahlenem Portlandzement und an Erstarrungsbeschleunigern. Beide Komponenten sind für eine sehr schnelle Festigkeitsentwicklung, aber auch hohe Umweltauswirkungen (wie CO2-Emissionen, Primärenergiebedarf) verantwortlich. Portlandzement ist ein hervorragendes Bindemittel, bringt aber ein hohes Versinterungspotenzial und bei normaler Zusammensetzung einen geringen Widerstand gegen chemischen Angriff, wie zum Beispiel den Sulfatangriff aus dem Bergwasser, mit sich. Hingegen können latent hydraulische und puzzolanische Zusatzstoffe die Dauerhaftigkeit erhöhen, sind aber auch für eine langsame Festigkeitsentwicklung bekannt. Im Beitrag wird ein neues Konzept des Mischungsentwurfs vorgestellt, das auf der Auswahl geeigneter Zusatzstoffe (i.e. feinste Kalksteinmehle, die die Hydratation beschleunigen, kombiniert mit gemahlenem Hüttensand und Puzzolanen), der Optimierung von Packungsdichte und Wasserbedarf sowie einem optimalen Mischungsverhältnis aller Feinstoffe beruht. Es wird an exemplarischen Mischungszusammensetzungen gezeigt, welche Eigenschaften bzw. Leistungsmerkmale in Labortests sowie in großmaßstäblichen Spritzversuchen erreicht werden können. KW - Bindemittel KW - chemischer Angriff KW - CO2-Emission KW - Dauerhaftigkeit KW - Hüttensand KW - Hydratation KW - Kalkstein KW - Labortest KW - Mischungsverhältnis KW - Packungsdichte KW - Portlandzement KW - Primärenergie KW - Spritzbeton KW - Wasserbedarf KW - Zusatzstoff Y1 - 2018 SN - 978-3-85125-621-5 SP - 139 EP - 152 PB - Verlag der Technischen Universität Graz CY - Graz ER -