TY - JOUR A1 - Launhardt, M. A1 - Wörz, A. A1 - Loderer, A. A1 - Laumer, Tobias A1 - Drummer, Dietmar A1 - Hausotte, Tino A1 - Schmidt, M. T1 - Detecting surface roughness on SLS parts with various measuring techniques JF - Polymer Testing N2 - Selective Laser Sintering (SLS) is an additive manufacturing technique whereby a laser melts polymer powder layer by layer to generate three-dimensional parts. It enables the fabrication of parts with high degrees of complexity, nearly no geometrical restrictions, and without the necessity of a tool or a mold. Due to the orientation in the building space, the processing parameters, and the powder properties, the resulting parts possess an increased surface roughness. In comparison to other manufacturing techniques, e.g. injection molding, the surface roughness of SLS parts results from partially melted powder particles on the surface layer. The actual surface roughness must thus be characterized with respect to the part's eventual application. At the moment, there is no knowledge regarding which measuring technique is most suitable for detecting and quantifying SLS parts' surface roughness. The scope of this paper is to compare tactile profile measurement methods, as established in industry, to optical measurement techniques such as Focus Variation, Fringe Projection Technique (FPT), and Confocal Laser Scanning Microscope (CLSM). The advantages and disadvantages of each method are presented and, additionally, the effect of tactile measurement on a part's surface is investigated. KW - Selective Laser Sintering (SLS) KW - PA12 KW - Surface roughness KW - Measuring technique Y1 - 2016 SN - 0142-9418 U6 - https://doi.org/10.1016/j.polymertesting.2016.05.022 SN - 1873-2348 VL - 53 SP - 217 EP - 226 PB - Elsevier CY - Amsterdam ER -