TY - CHAP A1 - Herrmann, David A1 - Kunze, Julian A1 - Kobes, Julian A1 - Seelecke, Stefan A1 - Motzki, Paul A1 - Rizzello, Gianluca A1 - Böhm, Valter T1 - A mobile tensegrity robot driven by rolled dielectric elastomer actuators T2 - 2025 IEEE 8th International Conference on Soft Robotics (RoboSoft), 22-26.April 2025, Lausanne N2 - This paper presents a tensegrity-based mobile robot powered by dielectric elastomer actuators (DEAs), which provide high compliance and adaptability. The design consists of two V-shaped members linked by DEAs, enabling both symmetrical and asymmetrical actuation for varied movement patterns. Modal analysis and simulations show that uniform DEA actuation supports efficient linear motion, while asymmetrical actuation enables controlled circular paths. Experimental testing highlights the influence of voltage waveforms, frequencies, and surface types on speed, with optimal performance achieved using rectangular waveforms on low-friction surfaces. The robot reaches a top speed of 188 mm/s, among the highest reported for DEA-driven robots. KW - Vibrations KW - Surface waves KW - Modal analysis KW - Resonant frequency KW - Soft robotics KW - Mobile robots KW - Rubber KW - Transient analysis KW - Dielectric elastomer actuators KW - Testing Y1 - 2025 U6 - https://doi.org/10.1109/RoboSoft63089.2025.11020974 PB - IEEE ER - TY - CHAP A1 - Schaeffer, Leon A1 - Schmaußer, Theresa A1 - Herrmann, David A1 - Lehmann, Lukas A1 - Dendorfer, Sebastian A1 - Böhm, Valter T1 - Multi-Body Simulation of a Dynamic Hand Orthosis based on a Prestressed Compliant Structure Incorporating the Human Hand T2 - 2025 International Symposium on Medical Robotics (ISMR), May 14-16, 2025, Atlanta, GA, USA, N2 - Many dynamic hand orthoses use one degree of freedom joints, such as hinge joints. Therefore, these orthoses can only partially replicate the complex, multi-axis movement of the hand. A possible solution for this is the use of prestressed compliant structures as the basis for orthoses. Determining the joint forces in the wrist and optimizing the dynamic orthosis to influence these forces as well as acting muscle forces are important steps in the development of these orthoses. For this reason, in this work multi-body simulation models of an orthosis with human hand models are presented. Based on these theoretical investigations, more detailed orthosis models as well as initial prototypes of prestressed compliant dynamic hand orthoses can be developed. KW - Hands KW - Wrist KW - Systematics KW - Simulation KW - Dynamics KW - Refining KW - Prototypes KW - Usability KW - Research and development KW - Testing Y1 - 2025 U6 - https://doi.org/10.1109/ISMR67322.2025.11025982 SP - 80 EP - 86 PB - IEEE ER - TY - GEN A1 - Merker, Lukas A1 - Böhm, Valter A1 - Zentner, Lena T1 - A tensegrity-based elastic joint element T2 - IFToMM WC 2023 - The 16th World Congress of the International Federation for the Promotion of Mechanism and Machine Science, 5-10 November, Tokyo, Japan Y1 - 2023 ER - TY - CHAP A1 - Lehmann, Lukas A1 - Herrmann, David A1 - Schaeffer, Leon A1 - Albaik, Mohammed A1 - Müller, Emily A1 - Rizzello, Gianluca A1 - Böhm, Valter T1 - Biomimetic Auxetic Compliant Tensegrity Metamaterial with Tunable Poisson's Ratio for the Application as a Soft Robotic Skin T2 - 2025 IEEE International Conference on Cyborg and Bionic Systems (CBS), Beijing, China ;10/17/2025 - 10/19/2025 N2 - The use of compliant tensegrity grids offers significant potential for adaptive and lightweight systems for applications in soft robotics. This paper presents foundational investigations into a new class of auxetic tensegrity metamaterials. This work demonstrates that the auxetic behavior of a tensegrity grid can be realized and tuned solely through the mechanical properties of tensioned members, without altering the equilibrium geometry, offering a key advantage over conventional auxetic structures with fixed topologies. To validate the concept, 3D-printed demonstrators are manufactured, tested and a possible application as a cylindrically shaped soft robotic skin is shown. Y1 - 2025 SN - 979-8-3315-9742-9 U6 - https://doi.org/10.1109/CBS65871.2025.11267590 SP - 188 EP - 193 PB - IEEE ER - TY - CHAP A1 - Schaeffer, Leon A1 - Liebrecht, Melanie A1 - Schmaußer, Theresa A1 - Herrmann, David A1 - Lehmann, Lukas A1 - Böhm, Valter T1 - Finite element analysis of a tensegrity joint model for the use in dynamic hand orthoses T2 - 2025 9th International Conference on Biomedical Engineering and Applications (ICBEA), Seoul, Republic of Korea, February 27 - March 2, 2025 N2 - Many current dynamic hand orthoses use single degree of freedom joints, such as hinge joints. Consequently, these orthoses can only partially replicate the complex, multi-axis range of motion of the hand. To overcome this limitation, one approach is to use prestressed compliant structures as the basis for orthoses. In order to be able to map the dynamic influences on the orthosis as well as to simulate everyday use, this article provides an overview of this orthosis concept and the most important aspects in the development of such an orthosis including the results of the modal analysis. Based on these theoretical investigations, the presented methodological approach can be used to develop initial prototypes of tensegrity-based hand orthoses. KW - Hand orthosis KW - Modal Analysis KW - Tensegrity Joint Y1 - 2025 UR - https://ieeexplore.ieee.org/document/11018707 SN - 979-8-3315-3571-1 U6 - https://doi.org/10.1109/ICBEA66055.2025.00016 SP - 41 EP - 48 PB - IEEE ER -