TY - CHAP A1 - Herrmann, David A1 - Schaeffer, Leon A1 - Lehmann, Lukas A1 - Böhm, Valter A1 - Rieffel, John T1 - Basic Investigations on a Compliant 2D Tensegrity Grid for the Use in Soft Robotic Applications T2 - 2024 6th International Conference on Reconfigurable Mechanisms and Robots (ReMAR), 23-26 June 2024, Chicago, IL, USA N2 - The use of compliant tensegrity grids in soft robotic applications is a promising research topic. By using these grids, systems with large shape and stiffness change ability can be realized. In this paper, different tensegrity grid variants, consisting of rigid members indirectly connected via compliant tensioned members, are presented. A selected grid variant is analyzed in more detail for shape adaptation. Therefore the use of the grid as end effector in form-fit grippers is selected as a specific application case. Covariance Matrix Adaptation Evolution Strategies are used to optimize actuators for two given shape function variants and an evaluation is carried out. Y1 - 2024 SN - 979-8-3503-9596-9 U6 - https://doi.org/10.1109/ReMAR61031.2024.10619926 SP - 652 EP - 657 PB - IEEE ER - TY - JOUR A1 - Becker, Tatiana I. A1 - Raikher, Yuriy L. A1 - Stolbov, Oleg V. A1 - Böhm, Valter A1 - Zimmermann, Klaus T1 - Magnetoactive elastomers for magnetically tunable vibrating sensor systems JF - Physical Sciences Reviews N2 - Magnetoactive elastomers (MAEs) are a special type of smart materials consisting of an elastic matrix with embedded microsized particles that are made of ferromagnetic materials with high or low coercivity. Due to their composition, such elastomers possess unique magnetic field-dependent material properties. The present paper compiles the results of investigations on MAEs towards an approach of their potential application as vibrating sensor elements with adaptable sensitivity. Starting with the model-based and experimental studies of the free vibrational behavior displayed by cantilevers made of MAEs, it is shown that the first bending eigenfrequency of the cantilevers depends strongly on the strength of an applied uniform magnetic field. The investigations of the forced vibration response of MAE beams subjected to in-plane kinematic excitation confirm the possibility of active magnetic control of the amplitude-frequency characteristics. With change of the uniform field strength, the MAE beam reveals different steady-state responses for the same excitation, and the resonance may occur at various ranges of the excitation frequency. Nonlinear dependencies of the amplification ratio on the excitation frequency are obtained for different magnitudes of the applied field. Furthermore, it is shown that the steady-state vibrations of MAE beams can be detected based on the magnetic field distortion. The field difference, which is measured simultaneously on the sides of a vibrating MAE beam, provides a signal with the same frequency as the excitation and an amplitude proportional to the amplitude of resulting vibrations. The presented prototype of the MAE-based vibrating unit with the field-controlled “configuration” can be implemented for realization of acceleration sensor systems with adaptable sensitivity. The ongoing research on MAEs is oriented to the use of other geometrical forms along with beams, e.g. two-dimensional structures such as membranes. KW - adaptable sensor unit KW - amplification ratio KW - bending vibration KW - eigenfrequency KW - Magnetic field control KW - magnetoactive elastomer Y1 - 2020 U6 - https://doi.org/10.1515/psr-2019-0125 SN - 2365-659X VL - 7 IS - 10 SP - 1 EP - 28 PB - de Gruyter ER - TY - GEN A1 - Herrmann, David A1 - Schaeffer, Leon A1 - Böhm, Valter ED - Flores, Paulo ED - Marques, Filipe ED - Da Rodrigues Silva, Mariana T1 - Theoretical considerations on 2D multistable tensegrity structures based on equilateral triangles T2 - MMT Symposium (Mechanism and Machine Theory Symposium): Book of Abstracts ; June 26-28, 2024. - Guimarães, Portugal Y1 - 2024 SN - 978-989-33-6448-2 IS - 1. edition SP - 403 EP - 404 PB - Departamento de Engenharia Mecânica, Universidade do Minho CY - Guimarães, Portugal ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Striegl, Birgit A1 - Böhm, Valter A1 - Monkman, Gareth J. T1 - Shape memory effects using magnetoactive Boron-organo-silicon oxide polymers JF - Macromolecular Chemistry and Physics N2 - Thermomechanical shape memory materials have certain disadvantages when it comes to 3D volumetric reproduction intended for rapid prototyping or robotic prehension. The need to constantly supply energy to counteract elastic retraction forces in order to maintain the required geometry, together with the inability to achieve conformal stability at elevated temperatures, limits the application of thermal shape memory polymers. Form removal also presents problems as most viscoelastic materials do not ensure demolding stability. This work demonstrates how magnetoactive boron−organo−silicon oxide polymers under the influence of an applied magnetic field can be used to achieve energy free sustainable volumetric shape memory effects over extended periods. The rheopectic properties of boron−organo−silicon oxide materials sustain form removal without mold distortion. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-23205 N1 - Corresponding Author: Gareth J. Monkman VL - 221 IS - 15 SP - 1 EP - 8 PB - Wiley ER - TY - CHAP A1 - Schaeffer, Leon A1 - Herrmann, David A1 - Böhm, Valter T1 - Voruntersuchung einer vorgespannten nachgiebigen Struktur für den Einsatz in dynamischen Handorthesen T2 - 9. IFToMM D-A-CH Konferenz, 16./17. März 2023, Universität Basel N2 - In diesem Beitrag erfolgt die theoretische Untersuchung einer zweidimensionalen nachgiebigen Tensegrity-Struktur in Hinsicht auf ihre potenzielle Eignung als Basisstruktur für eine dynamische Handorthese. Translatorische und rotatorische relative Bewegungsmöglichkeiten zwischen den Drucksegmenten der Struktur sind möglich, da diese Segmente durch nachgiebige Zugsegmente miteinander verbunden sind. Die Form der Struktur und ihre Vorspannung in einer statisch stabilen Gleichgewichtskonfiguration werden mit Hilfe der Minimierung des Kräfte- und Momentenungleichgewichts, der Betrachtung der potentiellen Energie der Struktur und einem Ansatz mittels statischer Finite-Elemente-Methode (FEM) in Abhängigkeit der Segmentparameter untersucht. N2 - This paper presents a theoretical investigation of a two-dimensional compliant tensegrity structure with respect to its potential suitability as a base structure for a dynamic hand orthosis. Translational and rotational relative motion possibilities between the pressure segments of the structure are possible, as these segments are connected by compliant tension segments. The shape of the structure and its preload in a static stable equilibrium configuration are investigated using minimization of force and moment imbalance, consideration of the potential energy of the structure, and a static finite element method (FEM) approach as a function of segment parameters. T2 - Preliminary investigation of a prestressed compliant structure for use in dynamic hand orthoses Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:465-20230314-153711-8 PB - DuEPublico CY - Duisburg-Essen ER - TY - JOUR A1 - Schaeffer, Leon A1 - Herrmann, David A1 - Schratzenstaller, Thomas A1 - Dendorfer, Sebastian A1 - Böhm, Valter T1 - Preliminary theoretical considerations on the stiffness characteristics of a tensegrity joint for the use in dynamic orthoses JF - Journal of Medical Robotics Research N2 - Early motion therapy plays an important role for effective long-term healing of joint injuries. In many cases, conventional dynamic orthoses fail to address the intricate movement possibilities of the underlying joints, limited by their simplistic joint representations, often represented by revolute joints, enabling rotations by only one axis. In this paper, a two-dimensional compliant tensegrity joint for use in biomedical applications is investigated. It consists of two compressed members and five compliant tensioned members. Relative movement possibilities are realized by the intrinsic compliance of the structure. In the development of these systems, the first step is the determination of the static stable equilibrium. This analysis is conducted in this paper by considering the potential energy approach or by using the geometric nonlinear finite element method. The mechanical behavior of the structure is assessed with a specific emphasis on its mechanical compliance. The primary objective of this study is the investigation of the influence of structural parameters on the overall stiffness and movability of the structure. The results underscore the significant effect of member parameters on the stiffness and movability of the compliant tensegrity joint, particularly under varying load magnitudes. These findings provide insights for optimizing the joint’s performance, contributing to its potential application in advanced orthotic and exoskeleton devices. KW - mechanical compliance KW - flexibility ellipsis KW - form-finding KW - tensegrity joint Y1 - 2023 U6 - https://doi.org/10.1142/S2424905X23400081 PB - World Scientific ER - TY - JOUR A1 - Schorr, Philipp A1 - Carrillo Li, Enrique Roberto A1 - Kaufhold, Tobias A1 - Rodriguez Hernandez, Jorge Antonio A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter T1 - Kinematic analysis of a rolling tensegrity structure with spatially curved members JF - Meccanica N2 - In this work, a tensegrity structure with spatially curved members is applied as rolling locomotion system. The actuation of the structure allows a variation of the originally cylindrical shape to a conical shape. Moreover, the structure is equipped with internal movable masses to control the position of the center of mass of the structure. To control the locomotion system a reliable actuation strategy is required. Therefore, the kinematics of the system considering the nonholonomic constraints are derived in this paper. Based on the resulting insight in the locomotion behavior a feasible actuation strategy is designed to control the trajectory of the system. To verify this approach kinematic analyses are evaluated numerically. The simulation data confirm the path following due to an appropriate shape change of the tensegrity structure. Thus, this system enables a two-dimensional rolling locomotion. KW - Tensegrity structure KW - Inverse kinematics KW - Nonholonomic mechanics Y1 - 2021 U6 - https://doi.org/10.1007/s11012-020-01199-x SN - 0025-6455 VL - 56 SP - 953 EP - 961 PB - Springer ER - TY - CHAP A1 - Schorr, Philipp A1 - Schale, Florian A1 - Otterbach, Jean Marc A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter T1 - Investigation of a Multistable Tensegrity Robot applied as Tilting Locomotion System T2 - Proceedings of the 2020 IEEE International Conference on Robotics and Automation (ICRA): 31 May-31 August 2020, Paris N2 - This paper describes the development of a tilting locomotion system based on a compliant tensegrity structure with multiple stable equilibrium configurations. A tensegrity structure featuring 4 stable equilibrium states is considered. The mechanical model of the structure is presented and the according equations of motion are derived. The variation of the length of selected structural members allows to influence the prestress state and the corresponding shape of the tensegrity structure. Based on bifurcation analyses a reliable actuation strategy to control the current equilibrium state is designed. In this work, the tensegrity structure is assumed to be in contact with a horizontal plane due to gravity. The derived actuation strategy is utilized to generate tilting locomotion by successively changing the equilibrium state. Numerical simulations are evaluated considering the locomotion characteristics. In order to validate this theoretical approach a prototype is developed. Experiments regarding to the equilibrium configurations, the actuation strategy and the locomotion characteristics are evaluated using image processing tools and motion capturing. The results verify the theoretical data and confirm the working principle of the investigated tilting locomotion system. This approach represents a feasible actuation strategy to realize a reliable tilting locomotion utilizing the multistability of compliant tensegrity structures. KW - actuators KW - bifurcation KW - mechanical stability KW - mobile robots KW - motion control KW - numerical analysis KW - robot dynamics KW - robot kinematics KW - vibration control Y1 - 2020 U6 - https://doi.org/10.1109/ICRA40945.2020.9196706 SP - 2932 EP - 2938 ER - TY - CHAP A1 - Schorr, Philipp A1 - Böhm, Valter A1 - Zentner, Lena A1 - Zimmermann, Klaus ED - Gusikhin, Oleg ED - Madani, Kurosh T1 - Design of a Vibration Driven Motion System Based on a Multistable Tensegrity Structure T2 - ICINCO 2018: proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics, Porto, Portugal, July 29-31, 2018 N2 - In this paper a novel approach to realize a uniaxial bidirectional vibration driven motion system with controllable direction of motion is investigated. The considered motion system bases on a tensegrity structure with multiple stable equilibrium configurations. The structure is in contact with a horizontal plane due to gravity and the actuation is realized by the harmonic change of the length of a selected member. Beside varying the actuation parameters, the direction of motion can be controlled by changing the equilibrium configuration of the tensegrity structure. In this paper the topology of the tensegrity structure and the parameter values are chosen appropriately to provide two symmetric equilibrium configurations. A change of the equilibrium state yields a novel configuration of the entire motion system which is symmetric to the original state. Utilizing the symmetry of the system the same actuation yields an opposite motion. This approach represents a reliable opportunity to control the direction of motion by changing the equilibrium state for constant actuation parameters. This paper focuses on the parameter selection and the design of the actuation of the vibration driven motion system. The working principle of the vibration driven motion system is verified by numerical simulations. This contribution represents the theoretical investigation for the further development of a prototype. KW - Compliant tensegrity structure KW - Vibration driven motion multistability Y1 - 2020 SN - 978-3-030-31992-2 U6 - https://doi.org/10.1007/978-3-030-31993-9_14 VL - 613 SP - 302 EP - 317 PB - Springer CY - Cham ER - TY - CHAP A1 - Schorr, Philipp A1 - Böhm, Valter A1 - Stepan, G. A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Stépán, G. ED - Uhl, Tadeusz T1 - Multi-mode motion system based on a multistable tensegrity structure T2 - Advances in Mechanism and Machine Science : Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science N2 - This paper presents a multi-mode motion system based on a compliant tensegrity structure with multiple stable equilibrium configurations. The motion system is in contact to an arbitrarily shaped rigid ground due to gravity. The movement is realized by changing successively between different equilibrium states. Depending on the strategy of changing the equilibrium configuration, different motion types occur. The reachable area of the motion system can be enlarged by adapting the motion type depending on the given environmental characteristics. Furthermore, the efficiency of the motion can be improved by choosing the most suitable motion mode. Theoretical studies regarding the change of the equilibrium states are introduced. Moreover, simulation results for the different motion modes tilting, vibration driven and jumping are illustrated. The resulting motion characteristics emphasize the advantageous adaptability of the motion system regarding to varying environmental conditions. KW - bifurcation analysis KW - multimodal motion KW - tensegrity Y1 - 2019 SN - 978-3-030-20130-2 U6 - https://doi.org/10.1007/978-3-030-20131-9_296 VL - 73 SP - 3007 EP - 3016 PB - Springer CY - Cham ER -