TY - GEN A1 - Melekhov, Evgeny A1 - Abb, Valerius A1 - Weidauer, Tobias A1 - Kammler, Martin A1 - Lechner, Alfred T1 - Tunable Nanopillars as Surface Enhanced Raman Scattering (SERS) Active Structure for Optical Quartz Glass Fiber T2 - SMSI 2021 - Sensors and Instrumentation N2 - In this work, a simple cost effective method to create tunable self-assembled three-dimensional nanostructure array-like nanoantennas on a tip of an optical quartz glass fiber is described. The structures are prepared using lithography-less dry etching. Gold nanoparticles are used as an etching mask using a thin metal-film thermal dewetting technique. The structures are applied as sensor for label-free analysis of organic substances in ppb range, such as drug residues in groundwater. The measurements are carried out by means of a Surface-enhanced Raman scattering (SERS) effect, an exchangeable sensor head, and a portable Raman device. This method allows in situ applications. Parathiocresol is used as a model substance to characterize the SERS cells. For metallization, gold and silver are compared. Reproducible SERS enhancement factors up to 10 7 are evaluated. Y1 - 2021 SN - 978-3-9819376-4-0 U6 - https://doi.org/10.5162/SMSI2021/B8.2 SP - 153 EP - 154 PB - AMA Association for Sensors and Measurement ER - TY - JOUR A1 - Melekhov, Evgeny A1 - Penn, Tatjana A1 - Weidauer, Tobias A1 - Abb, Valerius A1 - Kammler, Martin A1 - Lechner, Alfred T1 - Tunable nanopillar array on a quartz-fiber tip for surface enhanced Raman scattering (SERS) detection JF - tm - Technisches Messen N2 - In this work, a simple two-step method to create tunable self-assembled three-dimensional nanostructure array-like nanoantennas directly on the tip of an optical quartz glass fiber is described. The structures are prepared by using dry etching of the fiber tip. For the etching process, gold nanoparticles fabricated by thermal dewetting technique were used as template. The structures are applied as sensors for label-free analysis of organic substances in ppb range, such as drug residues in liquid solutions. The measurements are carried out by a portable Raman device with an exchangeable sensor head utilizing the SERS-effect. This method allows in situ applications. In order to characterize the SERS cells, para-thiocresol and diclofenac sodium are used as model substances. For optimization of the substrate performance, different thicknesses of the dewetting-layer (6, 9, 12 nm), different etching times for formation of the pillars (6, 8, 10 and 12 min), and different thicknesses of SERS-metallization (25, 50, 75 nm) of gold and silver are compared. In order to show the applicability of the structure on the tip of a fiber, measurements from the upper side and from the underside of the substrate on quartz plates are compared. Reproducible SERS enhancement factors up to 10 7 {10^{7}} were achieved. N2 - In dieser Arbeit wird eine zweistufige Methode beschrieben, um einstellbare selbstorganisierte dreidimensionale SERS-aktive Nanostrukturen in Form von Nanosäulen auf der Spitze einer optischen Quarzglasfaser herzustellen. Die Strukturen werden durch trockenchemisches Ätzen der Faserspitze erzeugt. Für den Ätzprozess werden als Maske Goldnanopartikel verwendet, die mittels Thermal Dewetting hergestellt werden. Der Sensor wird für eine markierungsfreie Analyse von organischen Substanzen, wie bspw. Medikamentenrückstände in wässrigen Lösungen, im ppb-Bereich eingesetzt. Die Messungen werden mit einem tragbaren Raman-Gerät mit einem austauschbaren Sensorkopf durchgeführt. Um die SERS-Zellen zu charakterisieren, werden para-Thiocresol und Diclofenac-Natrium als Modellsubstanzen verwendet. Zur Optimierung der Substratleistung werden unterschiedliche Dicken der Dewettinglayer (6, 9, 12 nm), unterschiedliche Ätzzeiten der Nanosäulen (6, 8, 10 und 12 min) und unterschiedliche Schichtdicken der SERS-Metallisierung (25, 50, 75 nm) von Gold und Silber verglichen. Um die Anwendbarkeit der Struktur an der Spitze einer Faser zu zeigen, werden Messungen von der Oberseite und von der Rückseite des Substrats in Form eines Quarzglasplatten verglichen. Diese Struktur liefert einen reproduzierbaren Verstärkungsfaktor von bis zu 107. T2 - Einstellbare Nanosäulenanordnung auf der Spitze einer Quarzglasfaser für oberflächenverstärkte Raman-Spektroskopie (SERS) Y1 - 2022 U6 - https://doi.org/10.1515/teme-2021-0093 VL - 89 IS - 1 SP - 70 EP - 81 PB - de Gruyter ER -