TY - JOUR A1 - Schorr, Philipp A1 - Carrillo Li, Enrique Roberto A1 - Kaufhold, Tobias A1 - Rodriguez Hernandez, Jorge Antonio A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter T1 - Kinematic analysis of a rolling tensegrity structure with spatially curved members JF - Meccanica N2 - In this work, a tensegrity structure with spatially curved members is applied as rolling locomotion system. The actuation of the structure allows a variation of the originally cylindrical shape to a conical shape. Moreover, the structure is equipped with internal movable masses to control the position of the center of mass of the structure. To control the locomotion system a reliable actuation strategy is required. Therefore, the kinematics of the system considering the nonholonomic constraints are derived in this paper. Based on the resulting insight in the locomotion behavior a feasible actuation strategy is designed to control the trajectory of the system. To verify this approach kinematic analyses are evaluated numerically. The simulation data confirm the path following due to an appropriate shape change of the tensegrity structure. Thus, this system enables a two-dimensional rolling locomotion. KW - Tensegrity structure KW - Inverse kinematics KW - Nonholonomic mechanics Y1 - 2021 U6 - https://doi.org/10.1007/s11012-020-01199-x SN - 0025-6455 VL - 56 SP - 953 EP - 961 PB - Springer ER - TY - CHAP A1 - Carrillo Li, Enrique Roberto A1 - Schorr, Philipp A1 - Kaufhold, Tobias A1 - Rodríguez Hernández, Jorge Antonio A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter ED - Awrejcewicz, Jan ED - Kaźmierczak, Markek ED - Olejnik, Paweł T1 - Kinematic analysis of the rolling locomotion of mobile robots based on tensegrity structures with spatially curved compressed components T2 - Applicable Solutions in Non-Linear Dynamical Systems; 15th International Conference "Dynamical Systems - Theory and Applications" (DSTA 2019, 2-5 December, 2019, Lodz, Poland N2 - In this work, a tensegrity structure with spatially curved members is applied as rolling locomotion system. The actuation of the structure allows a variation of the originally cylindrical shape to a conical shape. Moreover, the structure is equipped with internal movable masses to control the position of the center of mass of the structure. To control the locomotion system a reliable actuation strategy is required. Therefore, the kinematics of the system considering the nonholonomic constraints are derived in this paper. Based on the resulting insight in the locomotion behavior a feasible actuation strategy is designed to control the trajectory of the system. To verify this approach kinematic analyses are evaluated numerically. The simulation data confirm the path following due to an appropriate shape change of the tensegrity structure. Thus, this system enables a two-dimensional rolling locomotion. The use of mechanically compliant tensegrity structures in mobile robots is an attractive research topic, due to the possibility to adjust their mechanical properties reversibly during locomotion. In this paper rolling locomotion of mobile robots based on simple tensegrity structures, consisting of three compressed spatially curved members connected to a continuous net of prestressed tensional members, is discussed. Planar locomotion of these robots is induced by the movement of internal masses. The movement direction can be changed by changing the robot's shape between a cylinder and a truncated cone. The paper focuses on the description of the kinematics of these systems with respect to the shape change. KW - Inverse kinematics KW - Nonholonomic mechanics KW - Tensegrity structure Y1 - 2019 UR - http://212.191.87.54:1616/k16/awrejcewicz/publikacje/T2.pdf SN - 978-83-66287-30-3 SP - 335 EP - 344 PB - Wydawnictwo Politechniki Łódzkiej CY - Łódź, Polen ER - TY - CHAP A1 - Böhm, Valter A1 - Schorr, Philipp A1 - Schale, Florian A1 - Kaufhold, Tobias A1 - Zentner, Lena A1 - Zimmermann, Klaus T1 - Worm-Like Mobile Robot Based on a Tensegrity Structure T2 - 2021 IEEE 4th International Conference on Soft Robotics (RoboSoft): 2.04.2021 - 16.04.2021, New Haven, CT, USA N2 - This work presents a novel concept to develop mobile robots enabling crawling locomotion in tubular environment. Chain-like systems are designed by serial cascading a uniform tensegrity module. Inspired by the movement of worms in nature, an undulating shape change of the system is targeted to generate locomotion. The shape changeability of an exemplary tensegrity module due to internal actuation is examined in simulations and experiments. A prototype consisting of these tensegrity modules is manufactured and the locomotion principle is verified in experiments. Comparing to existing prototypes this approach enables an enhanced compliance due to the modular assembly of tensegrity structures. KW - Mobile robots KW - motion control Y1 - 2021 SN - 978-1-7281-7713-7 U6 - https://doi.org/10.1109/robosoft51838.2021.9479193 SP - 358 EP - 363 PB - IEEE ER - TY - JOUR A1 - Chavez Vega, Jhohan Harvey A1 - Schorr, Philipp A1 - Kaufhold, Tobias A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter T1 - Influence of Elastomeric Tensioned Members on the Characteristics of Compliant Tensegrity Structures in Soft Robotic Applications JF - Procedia Manufacturing N2 - The use of mechanically prestressed compliant structures in soft robotics is a recently discussed topic. Tensegrity structures, consisting of a set of rigid disconnected compressed members connected to a continuous net of prestressed elastic tensioned members build one specific class of these structures. Robots based on these structures have manifold shape changing abilities and can adapt their mechanical properties reversibly by changing of their prestress state according to specific tasks. In the paper selected aspects on the potential use of elastomer materials in these structures are discussed with the help of theoretical analysis. Therefore, a selected basic tensegrity structure with elastomer members is investigated focusing on the stiffness and shape changing ability in dependence of the nonlinear hyperelastic behavior of the used elastomer materials. The considered structure is compared with a conventional tensegrity structure with linear elastic tensioned members. Finally, selected criterions for the advantageous use of elastomer materials in compliant tensegrity robots are discussed. KW - compliant tensegrity structures KW - soft robotics KW - elastomers Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.11.048 SN - 2351-9789 VL - 52 SP - 289 EP - 294 PB - Elsevier ER - TY - JOUR A1 - Schümann, Malte A1 - Morich, J. A1 - Kaufhold, Tobias A1 - Böhm, Valter A1 - Zimmermann, Klaus A1 - Odenbach, Stefan T1 - A mechanical characterisation on multiple timescales of electroconductive magnetorheological elastomers JF - Magnetism and Magnetic Materials N2 - Magnetorheological elastomers are a type of smart hybrid material which combines elastic properties of a soft elastomer matrix with magnetic properties of magnetic micro particles. This leads to a material with magnetically controllable mechanical properties of which the magnetorheological effect is the best known. The addition of electroconductive particles to the polymer mix adds electrical properties to the material behaviour. The resulting electrical resistance of the sample can be manipulated by external magnetic fields and mechanical loads. This results in a distinct interplay of mechanical, electrical and magnetic effects with a highly complex time behaviour. In this paper a mechanical characterisation on multiple time scales was conducted to get an insight on the short and long-term electrical and mechanical behaviour of this novel material. The results show a complex resistivity behaviour on several timescales, sensitive to magnetic fields and strain velocity. The observed material exhibits fatigue and relaxation behaviour, whereas the magnetorheological effect appears not to interfere with the piezoresistive properties. Y1 - 2018 U6 - https://doi.org/10.1016/j.jmmm.2018.01.029 VL - 453 IS - May SP - 198 EP - 205 PB - Elsevier ER - TY - JOUR A1 - Zimmermann, Klaus A1 - Böhm, Valter A1 - Becker T.I., A1 - Chavez Vega, Jhohan Harvey A1 - Kaufhold, Tobias A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Diermeier, Andreas A1 - Prem, Nina T1 - Mechanical Characterization of the Field-Dependent Properties of Magnetoactive Polymers and Integrated Electrets for their Application in Soft Robotics JF - International Scientific Journal "Problems of Mechanics" Y1 - 2017 SN - 1512-0740 VL - 69 IS - 4 ER -