TY - CHAP A1 - Trost, Marco A1 - Teich, Enrico A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Master Production Scheduling and the relevance of included social criteria T2 - ACC Journal N2 - Folgender Beitrag untersucht die Notwendigkeit einer Berücksichtigung von Mitarbeiterauslastungen und davon abhängiger Bearbeitungszeiten in der Hauptproduktionsprogrammplanung. Zudem wird aufgezeigt, dass dieses Themengebiet aktuell eine Forschungslücke darstellt. Aus diesem Grund wird ein selbst entwickeltes lineares Optimierungsmodell für die Hauptproduktionsprogrammplanung vorgestellt, welches soziale Kriterien und eine geeignete Fallstudie enthält. Die Ergebnisse verdeutlichen, dass erhebliche Abweichungen durch eine Ignoranz von Mitarbeiterauslastungen und davon abhängiger Bearbeitungszeiten entstehen. Deshalb ist eine Integration zu empfehlen. Allerdings wird auch deutlich, dass weitere Forschungen notwendig sind, speziell für die Bestimmung geeigneter Erschöpfungsfunktionen, so wie beispielsweise Funktionen für Lerneffekte existieren. KW - Fertigungsprogrammplanung KW - Personaleinsatz KW - Lineare Optimierung KW - Sustainability KW - Production planning and control KW - Master production scheduling KW - Linear optimization KW - Human fatigue Y1 - 2017 U6 - https://doi.org/10.15240/tul/004/2017-2-011 VL - 23 IS - 3 SP - 146 EP - 154 ER - TY - JOUR A1 - Trost, Marco A1 - Teich, Enrico A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Ein lineares Optimierungsmodell zur Hauptproduktionsprogrammplanung mit Berücksichtigung sozialer Größen JF - uwf UmweltWirtschaftsForum N2 - Aufgrund weniger existenter sozialorientierter Forschungen im Rahmen der Produktionsplanung und -steuerung stellt dieser Beitrag ein lineares Optimierungsmodell für die Hauptproduktionsprogrammplanung vor, welches soziale Kriterien berücksichtigt. Erste Ergebnisse deuten an, dass geringe Kosten nicht durch eine maximierte Mitarbeiterauslastung entstehen sondern durch geringe Kapazitätsschwankungen. KW - Sustainability KW - Social dimension KW - Production planning and control KW - Master production scheduling KW - Linear optimisation KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung KW - Personaleinsatz KW - Lineare Optimierung Y1 - 2017 U6 - https://doi.org/10.1007/s00550-017-0454-7 VL - 25 SP - 71 EP - 80 ER - TY - BOOK A1 - Claus, Thorsten A1 - Herrmann, Frank A1 - Teich, Enrico T1 - Kostensimulation BT - Grundlagen, Forschungsansätze, Anwendungsbeispiele KW - Kostenanalyse KW - Simulation Y1 - 2019 SN - 978-3-658-25167-3 U6 - https://doi.org/10.1007/978-3-658-25168-0 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Trost, Marco A1 - Claus, Thorsten A1 - Teich, Enrico A1 - Selmair, Maximilian A1 - Herrmann, Frank T1 - Social and Ecological Capabilities for a sustainable Hierarchical Production Planning T2 - Proceedings of the 30th EUROPEAN Conference on Modeling and Simulation (ECMS 2016), May 31st - June 3rd, 2016, Regensburg, Germany N2 - Production planning and production control mainly focus on optimising the entire production system of a company. On the basis of hierarchical planning as a suitable method for solving this task, this paper shows - besides the economic dimension taken into account so far - that there are also social and ecological effects which will have to be considered in the process of planning. For this purpose, we would like to indicate here which social and ecological parameters can be or have already been taken into account for master production scheduling, for lot sizing and resource scheduling. As a result, an overview has been created which presents the existing concepts of sustainable production planning and production control as well as the existing deficits regarding the sustainability perspective. KW - Hierarchische Produktionsplanung KW - Soziale Verantwortung KW - Ökologie KW - production planning KW - hierarchical planning KW - social variables KW - ecological variables KW - sustainable hierarchical production planning Y1 - 2016 U6 - https://doi.org/10.7148/2016-0432 ER - TY - CHAP A1 - Selmair, Maximilian A1 - Herrmann, Frank A1 - Claus, Thorsten A1 - Teich, Enrico T1 - Potential of Reducing the Total Energy Consumption by Scheduling a Jobshop Production System T2 - Proceedings of the 16th International Conference on Simulation in Production and Logistics, September 23 - 25, 2015, Dortmund, Germany N2 - This research paper has evaluated the potential of reducing energy consumption by scheduling jobshop production systems with machines using standby modes in free times. The initial introduction of the planning issue is followed by a description of the approach to assess the available potential. Subsequently, the research procedure by means of simulation, a detailed discussion of the results and a perspective on future research is given. Moreover, the notion that scheduling influences the energy consumption in jobshop production systems is supported. The presented simulation research also documents that there is no direct correlation between energy consumption and total lead time, although this was presumed usually. Finally, this paper provides a forecast for a possible optimisation model as well as an exemplary model with an energy-optimised schedule plan. KW - Produktionsplanung KW - Reihenfolgeproblem KW - Energieverbrauch Y1 - 2015 SP - 375 EP - 384 ER - TY - CHAP A1 - Trost, Marco A1 - Claus, Thorsten A1 - Teich, Enrico A1 - Herrmann, Frank T1 - Die soziale Dimension in der nachhaltigen hierarchischen Produktionsplanung – Stand der Forschung und Ansätze zur Weiterentwicklung bestehender Planungsmodelle T2 - Proceedings zur NAMA 2016 (NAMA 2016), October 5th - 7th, 2016, Dresden, Germany N2 - Bei der Produktionsplanung steht die Optimierung des Produktionssystems eines Unternehmens im Vordergrund. In diesem Beitrag wird auf Basis der hierarchischen Produktionsplanung aufgezeigt, dass neben ökonomischen und ökologischen Aspekten insbesondere auch soziale Effekte bei der Entscheidungsfindung zu berücksichtigen sind. Dazu werden für die Hauptproduktionsprogrammplanung, die Losgrößenplanung und die Ressourcenbelegungsplanung dargelegt, welche sozialen Größen berücksichtigt werden können beziehungsweise bereits berücksichtigt sind. Überdies wird ein Modellansatz zur Hauptproduktionsprogrammplanung vorgestellt, der auf die Beseitigung identifizierter Forschungslücken abzielt. KW - Hierarchische Produktionsplanung KW - Nachhaltigkeit KW - Soziale Verantwortung Y1 - 2016 ER - TY - CHAP A1 - Dilefeld, Maximilian A1 - Claus, Thorsten A1 - Teich, Enrico T1 - Robot Task Assignment In Dynamic Factory Environments T2 - Proceedings of the 38th ECMS International Conference on Modeling and Simulation (ECMS 2024): June 4th - June 7th, 2024, Cracow, Poland N2 - Automated Guided Vehicles (AGVs) and Autonomous Mobile Robots (AMRs) are being applied more and more frequently in a wide range of use cases. Following the general trend of decentralisation of control structure in the Industry 4.0 paradigm, this paper analyses the application of auction algorithms to solve the robot task assignment problem. We focus on the use of mobile robots in production environments with a high level of uncertainty which places hight demand on the flexibility of the online scheduling architecture. A sequential single-item (SSI) auction algorithm is validated for a real-world use case where multiple mobile robots supply car bodies to manual rework stations in a paint shop application using simulation. The optimization objective of such an algorithm is discussed in regards to the examined use case. KW - Mobile Robots KW - Auction KW - Simulation Y1 - 2024 SN - 978-3-937436-84-5 U6 - https://doi.org/10.7148/2024-0338 SN - 2522-2422 SP - 338 EP - 344 PB - ECMS ER -