TY - CHAP A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Amend, Philipp A1 - Roth, Stephan A1 - Schmidt, Michael T1 - Analysis of Temperature Gradients during Simultaneous Laser Beam Melting of Polymers T2 - Physics Procedia N2 - By simultaneous laser beam melting (SLBM), different polymer powders can be processed to multi-material parts, which offers the potential to enlarge the field of application for conventional LBM. In a SLBM process, a powder bed consisting of different polymers and therefore with different melting and crystallization temperatures is deposited. Besides the use of infrared emitters for preheating the lower melting polymer, a CO2 laser distributes the necessary preheating temperature of the higher melting polymer. In the last step, a thulium fibre laser distributes the energy necessary for melting the two preheated powders simultaneously. In order to analyze the temperature gradients of the process on the powder surface and in deeper layers, a high-resolution thermal imaging system and thermocouples are used. KW - Additive manufacturing KW - Multi-Material Parts KW - Process Qualification KW - Simultaneous Laser Beam Melting Y1 - 2014 U6 - https://doi.org/10.1016/j.phpro.2014.08.159 VL - 56 SP - 167 EP - 175 PB - Elsevier ER - TY - CHAP A1 - Laumer, Tobias A1 - Roth, Stephan A1 - Stichel, Thomas A1 - Schmidt, Michael T1 - Strategien zur Erzeugung von dreidimensionalen Multi-Material-Bauteilen T2 - 4. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 814, 2015, Nürnberg Y1 - 2015 UR - https://www.researchgate.net/publication/295860904_Strategien_zur_Erzeugung_von_dreidimensionalen_Multi-Material-Bauteilen SN - 978-3931864651 SN - 3931864650 ER - TY - CHAP A1 - Amend, Philipp A1 - Mrotzek, Tino A1 - Laumer, Tobias A1 - Wolf, Michel A1 - Roth, Stephan A1 - Gude, Maik A1 - Schmidt, Michael T1 - Experimental Investigations on Laser-based Hot-melt Bonding and Injection Molding for Laser-structured Metal Plastic Hybrids T2 - Laser in Manufacturing (LIM 2017), Munich, Germany N2 - The use of thermoplastics in lightweight construction is continuing to grow. This implies the need for suitable joining techniques to combine thermoplastics with other materials, such as metals, to gain tailored multi-material parts. In this paper latest results of experimental investigations on laser-based hot-melt bonding and injection molding for laser-structured metal plastic hybrids are presented. As materials stainless steel and short-fiber reinforced polyamide are used. The stainless steel surface is structured with a nanosecond pulse laser before joining to improve the mechanical adhesion between the dissimilar materials. Thereby, different structure depths in the range between 16.6 ± 1.2 µm and 66.5 ± 2.5 µm as well as different hatch distances between 70 and 300 µm are realized. The laser-based joining process is carried out irradiating the metallic surface multiple times. Positioned below the metal in T-joint configuration, the thermoplastic melts as a result of heat transfer and acts as hot-melt cohesive. Besides, hybrid joints are manufactured using injection molding. For experiments, the mold temperature as well as the melt temperature are varied. Regardless of the joining process, the hybrid joints are mechanically characterized by tensile tests. The results demonstrate that for both joining processes strong laser-structured metal plastic hybrids can be realized. KW - injection molding KW - laser structuring KW - Laser-based hot-melt bonding KW - multi-material design Y1 - 2017 UR - https://www.researchgate.net/publication/318110636_Experimental_Investigations_on_Laser-based_Hot-melt_Bonding_and_Injection_Molding_for_Laser-structured_Metal_Plastic_Hybrids SN - 978-3-87525-428-0 ER - TY - CHAP A1 - Amend, Philipp A1 - Laumer, Tobias A1 - Roth, Stephan A1 - Baat, Florian A1 - Schmidt, Michael T1 - Investigations on Laser-based Hot-melt Bonding of Additive Manufactured Plastic Parts to Metal Sheets for Strong and Tight Multi-material Joints T2 - Laser in Manufacturing (LIM 2017), Munich, Germany N2 - In this paper, first results regarding the realization of laser-based hot-melt bonding of additive manufactured plastics parts to metal sheets for strong and tight multi-material joints are presented. Compared to earlier investigations, in which nearly solely extruded plastic materials were applied, the use of additive manufactured plastics complements the research field with a promising approach. Besides the typical advantages of multi-material joints regarding weight reduction and high strengths, such parts can meet the needs of constructional freedom and the avoiding of tool costs. Materials used for this paper are aluminum (AlMg3), stainless steel (1.4301) and polyamide 12 (PA12). The performed experiments resulting in multi-material joints between metal and polyamide. The realized specimens undergo a tensile shear test and a tightness test, in which the characteristics of the joints are determined. KW - additive manufacturing KW - Laser-based hot-melt bonding KW - multi-material joint Y1 - 2017 UR - https://www.researchgate.net/publication/318110485_Investigations_on_Laser-based_Hot-melt_Bonding_of_Additive_Manufactured_Plastic_Parts_to_Metal_Sheets_for_Strong_and_Tight_Multi-material_Joint ER - TY - JOUR A1 - Laumer, Tobias A1 - Wudy, Katrin A1 - Drexler, Maximilian A1 - Amend, Philipp A1 - Roth, Stephan A1 - Drummer, Dietmar A1 - Schmidt, Michael T1 - Fundamental investigation of laser beam melting of polymers for additive manufacture JF - Journal of Laser Applications N2 - By selective laser sintering (SLS), polymer powders are molten layer by layer to build conventional prototypes or parts in small series with geometrical freedom that cannot be achieved by other manufacturing technologies. The SLS process is mainly defined by the beam–matter interaction between powder material, laser radiation and different material characteristics by itself. However the determination of these different material characteristics is problematic because powder material imposes certain requirements that cannot sufficiently be provided by conventional measurement methods. Hence new fundamental investigation methods to determine the optical and thermal material characteristics like the thermal diffusivity, thermal conductivity, or the influence of different heating rates on the melting behavior are presented in this paper. The different analysis methods altogether improve the process of understanding to allow recommendations for the future process controlling. Y1 - 2014 U6 - https://doi.org/10.2351/1.4892848 SN - 1938-1387 SN - 1042-346X VL - 26 IS - 4 PB - AIP Publishing ER -