TY - JOUR A1 - Hornberger, Helga A1 - Virtanen, Sannakaisa A1 - Boccaccini, Aldo R. T1 - Biomedical coatings on magnesium alloys BT - a review JF - Acta Biomaterialia N2 - This review comprehensively covers research carried out in the field of degradable coatings on Mg and Mg alloys for biomedical applications. Several coating methods are discussed, which can be divided, based on the specific processing techniques used, into conversion and deposition coatings. The literature review revealed that in most cases coatings increase the corrosion resistance of Mg and Mg alloys. The critical factors determining coating performance, such as corrosion rate, surface chemistry, adhesion and coating morphology, are identified and discussed. The analysis of the literature showed that many studies have focused on calcium phosphate coatings produced either using conversion or deposition methods which were developed for orthopaedic applications. However, the control of phases and the formation of cracks still appear unsatisfactory. More research and development is needed in the case of biodegradable organic based coatings to generate reproducible and relevant data. In addition to biocompatibility, the mechanical properties of the coatings are also relevant, and the development of appropriate methods to study the corrosion process in detail and in the long term remains an important area of research. KW - Magnesium alloyn KW - Biodegradable materials KW - Coatings KW - Conversion KW - Deposition Y1 - 2012 U6 - https://doi.org/10.1016/j.actbio.2012.04.012 VL - 8 IS - 7 SP - 2442 EP - 2455 ER - TY - JOUR A1 - Gebhardt, F. A1 - Seuss, Sigrid A1 - Turhan, Metehan C. A1 - Hornberger, Helga A1 - Virtanen, Sannakaisa A1 - Boccaccini, Aldo R. T1 - Characterization of electrophoretic chitosan coatings on stainless steel JF - Materials Letters N2 - Electrophoretic chitosan deposits on stainless steel AISI 316 L were produced and characterized. The coating quality (thickness, defectiveness, corrosion protection ability) was seen to depend on the electric field used for EPD. Corrosion studies in concentrated simulated body fluid (SBF5) demonstrated that the surface characteristics of AISI 316 L can be positively influenced by the chitosan coating. KW - Chitosan KW - Electrophoretic deposition KW - Biomaterials KW - Electrochemistry Y1 - 2012 U6 - https://doi.org/10.1016/j.matlet.2011.08.088 VL - 66 IS - 1 SP - 302 EP - 304 ER -