TY - CHAP A1 - Schorr, Philipp A1 - Böhm, Valter A1 - Zentner, Lena A1 - Zimmermann, Klaus ED - Gusikhin, Oleg ED - Madani, Kurosh T1 - Design of a Vibration Driven Motion System Based on a Multistable Tensegrity Structure T2 - ICINCO 2018: proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics, Porto, Portugal, July 29-31, 2018 N2 - In this paper a novel approach to realize a uniaxial bidirectional vibration driven motion system with controllable direction of motion is investigated. The considered motion system bases on a tensegrity structure with multiple stable equilibrium configurations. The structure is in contact with a horizontal plane due to gravity and the actuation is realized by the harmonic change of the length of a selected member. Beside varying the actuation parameters, the direction of motion can be controlled by changing the equilibrium configuration of the tensegrity structure. In this paper the topology of the tensegrity structure and the parameter values are chosen appropriately to provide two symmetric equilibrium configurations. A change of the equilibrium state yields a novel configuration of the entire motion system which is symmetric to the original state. Utilizing the symmetry of the system the same actuation yields an opposite motion. This approach represents a reliable opportunity to control the direction of motion by changing the equilibrium state for constant actuation parameters. This paper focuses on the parameter selection and the design of the actuation of the vibration driven motion system. The working principle of the vibration driven motion system is verified by numerical simulations. This contribution represents the theoretical investigation for the further development of a prototype. KW - Compliant tensegrity structure KW - Vibration driven motion multistability Y1 - 2020 SN - 978-3-030-31992-2 U6 - https://doi.org/10.1007/978-3-030-31993-9_14 VL - 613 SP - 302 EP - 317 PB - Springer CY - Cham ER - TY - JOUR A1 - Schorr, Philipp A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter T1 - Jumping locomotion system based on a multistable tensegrity structure JF - Mechanical systems and signal processing N2 - All known locomotion principles are limited respective to environmental conditions. Often, the occurrence of obstacles or gaps means the break-off for the operating motion systems. For such circumstances, a controllable jumping locomotion is required to cross these barriers. However, this locomotion demands sophisticated requirements to the actuation. The abrupt actuation is commonly realized by high dynamic actuators or complex mechanisms. In this work, a simple solution utilizing the multistability of a compliant tensegrity structure is described. Therefore, a two-dimensional tensegrity structure featuring four stable equilibria is considered. Based on bifurcation analyses a feasible actuation to control the current equilibrium configuration is derived. Changing between selected equilibrium states enables a great difference in potential energy, which yields a jumping motion of the structure. Based on numerical simulations a suitable actuation strategy is chosen to overcome obstacle and steps by jumping forward or backward, respectively. The theoretical approach is examined experimentally with a prototype of the multistable tensegrity structure. (c) 2020 Elsevier Ltd. All rights reserved. All known locomotion principles are limited respective to environmental conditions. Often, the occurrence of obstacles or gaps means the break-off for the operating motion systems. For such circumstances, a controllable jumping locomotion is required to cross these barriers. However, this locomotion demands sophisticated requirements to the actuation. The abrupt actuation is commonly realized by high dynamic actuators or complex mechanisms. In this work, a simple solution utilizing the multistability of a compliant tensegrity structure is described. Therefore, a two-dimensional tensegrity structure featuring four stable equilibria is considered. Based on bifurcation analyses a feasible actuation to control the current equilibrium configuration is derived. Changing between selected equilibrium states enables a great difference in potential energy, which yields a jumping motion of the structure. Based on numerical simulations a suitable actuation strategy is chosen to overcome obstacle and steps by jumping forward or backward, respectively. The theoretical approach is examined experimentally with a prototype of the multistable tensegrity structure. KW - Compliant tensegrity structure KW - Multibody dynamics KW - Multistability KW - Non-classical locomotion Y1 - 2021 U6 - https://doi.org/10.1016/j.ymssp.2020.107384 IS - 152 PB - Elsevier ER - TY - CHAP A1 - Böhm, Valter A1 - Sumi, Susanne A1 - Schorr, Philipp A1 - Zimmermann, Klaus ED - Awrejcewicz, Jan T1 - Dynamic Analysis of a Compliant Tensegrity Structure for the Use in a Gripper Application T2 - Dynamical systems in theoretical perspective (DSTA 2017), Łódź, Poland, December 11-14, 2017 N2 - The use of compliant tensegrity structures in robotic applications offers several advantageous properties. In this work the dynamic behaviour of a planar tensegrity structure with multiple static equilibrium configurations is analysed, with respect to its further use in a two-finger-gripper application. In this application, two equilibrium configurations of the structure correspond to the opened and closed states of the gripper. The transition between these equilibrium configurations, caused by a proper selected actuation method, is essentially dependent on the actuation parameters and on the system parameters. To study the behaviour of the dynamic system and possible actuation methods, the nonlinear equations of motion are derived and transient dynamic analyses are performed. The movement behaviour is analysed in relation to the prestress of the structure and actuation parameters. KW - Compliant tensegrity structure KW - Dynamic behaviour KW - Dynamic system KW - Gripper application KW - Multiple states of self equilibrium Y1 - 2018 SN - 978-3-319-96598-7 U6 - https://doi.org/10.1007/978-3-319-96598-7_26 SP - 323 EP - 334 PB - Springer CY - Cham ER - TY - JOUR A1 - Schorr, Philipp A1 - Böhm, Valter A1 - Zentner, Lena A1 - Zimmermann, Klaus T1 - Motion characteristics of a vibration driven mobile tensegrity structure with multiple stable equilibrium states JF - Journal of Sound and Vibration N2 - A novel type of a vibration driven motion system based on a compliant tensegrity structure with multiple stable equilibrium states is considered. These equilibrium configurations correspond to different prestress states with different dynamical properties. Therefore, the motion characteristics can be varied by changing the equilibrium state. For the application in the fields of mobile robotics, these discrete adjustable dynamics are advantageous. The vibration modes of the structure as well as the corresponding motion characteristics of the system can be adapted to the given environmental conditions in order to ensure a reliable motion. In this paper, dynamical investigations of an exemplary two-dimensional multistable tensegrity structure are considered. For the chosen parameter values the structure features two relevant equilibrium configurations. The resulting motion system is in contact to a horizontal plane due to gravity and the actuation is realized by the harmonic variation of the length of a single tensioned member. The motion of the system is simulated for various actuation frequencies with the different equilibrium states as an initial configuration. A uniaxial or a planar movement occurs depending on the selection of the actuated member within the tensegrity structure. The steady state motion is evaluated regarding motion characteristics like the steady state velocity. Moreover, the influences on the motion behavior caused by the different equilibrium states as an initial condition are emphasized. (C) 2018 Elsevier Ltd. All rights reserved. KW - Compliant tensegrity structure KW - LOCOMOTION KW - Multistability KW - Vibration driven motion Y1 - 2018 U6 - https://doi.org/10.1016/j.jsv.2018.09.019 VL - 437 IS - December SP - 198 EP - 208 PB - Elsevier ER - TY - CHAP A1 - Böhm, Valter A1 - Schorr, Philipp A1 - Feldmeier, T. A1 - Chavez Vega, Jhohan Harvey A1 - Henning, S. A1 - Zimmermann, Klaus A1 - Zentner, Lena T1 - An Approach to Robotic End Effectors Based on Multistable Tensegrity Structures T2 - New Trends in Mechanism and Machine Science: 8th European Conference on Mechanism Science (EuCoMeS), 2020 N2 - In this paper compliant multistable tensegrity structures with discrete variable stiffness are investigated. The different stiffness states result from the different prestress states of these structures corresponding to the equilibrium configurations. Three planar tensegrity mechanisms with two stable equilibrium configurations are considered exemplarily. The overall stiffness of these structures is characterized by investigations with regard to their geometric nonlinear static behavior. Dynamical analyses show the possibility of the change between the equilibrium configurations and enable the derivation of suitable actuation strategies. KW - Compliant tensegrity structure KW - Multiple states of self-equilibrium KW - Variable stiffness Y1 - 2020 U6 - https://doi.org/10.1007/978-3-030-55061-5_53 SP - 470 EP - 478 PB - Springer ER -