TY - CHAP A1 - Putzer, Michael A1 - Penzkofer, Rainer A1 - Ehrlich, Ingo A1 - Rasmussen, John A1 - Gebbeken, Norbert A1 - Dendorfer, Sebastian T1 - Musculoskeletal simulations to investigate the influence of vertebral geometrical parameters on lumbar spine loading T2 - 7th World Congress of Biomechanics, Boston, United States, 04/07/14 -11/07/14 Y1 - 2014 ER - TY - CHAP A1 - Schmid, Vinzent A1 - Jungbauer, Bastian A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Mottok, Jürgen ED - Ziemann, Olaf T1 - The influence of different types of fabrics on the fibre volume content and porosity in basalt fibre reinforced plastics T2 - 2nd Applied Research Conference 2012 - ARC 25./26. June 2012 N2 - High quality semi-finished products with reproducible properties of basaltic fibres are hardly available on the market. In order to examine the properties of basalt fibre reinforced plastics high quality specimens are necessary. The fibre volume content and the porosity of the produced specimen are used as the typical criteria to evaluate the achieved quality of the produced material. The effect of the geometrical properties of the different semi-finished products on the fibre volume contents is relatively small whereas the porosity content is considerably affected. Y1 - 2012 UR - https://www.researchgate.net/publication/268146522_The_influence_of_different_types_of_fabrics_on_the_fibre_volume_content_and_porosity_in_basalt_fibre_reinforced_plastics SP - 162 EP - 165 PB - Shaker ER - TY - CHAP A1 - Schmid, Vinzent A1 - Jungbauer, Bastian A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Mottok, Jürgen ED - Ziemann, Olaf T1 - Diminution of mass of different types of fibre reinforcements due to thermal load T2 - Applied Research Conference 2012 - ARC 2012, 25./26. June 2012 Y1 - 2012 SP - 231 EP - 235 PB - Shaker ER - TY - CHAP A1 - Romano, Marco A1 - Micklitz, Matthias A1 - Olbrich, Florian A1 - Bierl, Rudolf A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Experimental investigation of damping properties of unidirectionally and fabric reinforces plastics by the free decay method T2 - Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014 Y1 - 2014 SP - 665 EP - 679 ER - TY - CHAP A1 - Ottawa, Patrycja A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Wagner, Marcus A1 - Gebbeken, Norbert T1 - The influence of ondulation in fabric reinforced composites on dynamic properties in a mesoscopic scale T2 - 11. LS-DYNA Forum, 9. - 10. Oktober 2012, Ulm N2 - Structural mechanic properties of fiber reinforced plastics depend on the single components’ properties, namely matrix and fiber [5]. Simple micromechanic homogenization theories reach a limit when a laminate consists of fabric reinforced layers instead of unidirectional layers. The ondulations of warp and fill yarn caused by the textile semi-finished product are the reason why the mesoscopic scale, which is in between the microscopic and the macroscopic scale, has to be taken into account when mechanically characterizing fabric reinforced composites [3]. In this scale a mesomechanic kinematic can be derived analytically. Especially, when considering free damped vibrations of structures the repeated acting of the kinematic correlation significantly affects the damping behaviour to higher values compared to theoretically predicted damping ratios. The model is investigated using Finite-Element-Analyses and basically validated experimentally. Y1 - 2012 UR - https://www.dynamore.de/de/download/papers/dynamore/de/download/papers/ls-dyna-forum-2012/documents/materials-5-2 SP - 171 EP - 172 ER - TY - CHAP A1 - Valentino, Piergiorgio A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Furgiuele, Franco A1 - Gebbeken, Norbert ED - Iacovello, F. ED - Risitano, G. ED - Susmel, L. T1 - Mechanical characterization of basalt fibre reinforced plastic with different fabric reinforcements – Tensile tests and FE-calculations with representative volume elements (RVEs) T2 - Acta Fracturae - XXll Convegno Nazionale IGF (Italiano Gruppo Frattura) N2 - This paper describes the results of tensile tests and finite element (FE) calculations with representative volume elements (RVEs) of basalt fibre reinforced plastic with two different types of fabric reinforcements. As fabric reinforcements show repeating ondulations of warp and fill yarn, simple mixtures laws reach their limits. That is the reason why the mesoscopic dimension, lying between the microscopic and the macroscopic dimension, has to be taken into account when a mechanical characterization of fabric reinforced composites is carried out. The aim of this work is to determine the stiffness of a fabric reinforced composite in warp and fill direction with numerical investigations. The simulations are based on FE-calculation with two different RVEs. The tensile tests and the FE-calculations have been carried out for two different types of basalt fabrics, namely twill 2/2 and twill 1/3. The comparison between the experimental data and the results of the FE-calculations are provided in order to support the validity of the proposed model. Y1 - 2013 UR - http://www.gruppofrattura.it/pdf/convegni/22/IGFXXII/index.html#/242/ ER - TY - CHAP A1 - Romano, Marco A1 - Hoinkes, Carl J. J. A1 - Ehrlich, Ingo A1 - Höcherl, Johannes A1 - Gebbeken, Norbert ED - Meran, C. T1 - Influence of the impactor on the experimentally determined energy dissipation properties of fiber-reinforced plastics with hybrid layups under high velocity impact loads T2 - Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014 Y1 - 2014 SP - 650 EP - 664 ER - TY - CHAP A1 - Hoinkes, Carl J. J. A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Höcherl, Johannes A1 - Gebbeken, Norbert ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - Investigation of fibre reinforced plastics with monolithic and hybrid stacking sequences under high-velocity impact loads T2 - Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Eisenried, Michael A1 - Romano, Marco A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Ziemann, Olaf ED - Bogner, Werner ED - Mottok, Jürgen T1 - Influence of parameters of the production process on the material quality of unidirectionally reinforced prepregs T2 - Applied Research Conference 2013, ARC 2013 ; 17th and 18th October 2013, Deggendorf Y1 - 2013 SP - 70 EP - 75 PB - Shaker CY - Aachen ER -