TY - JOUR A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Drevenšek‐Olenik, Irena A1 - Shamonin (Chamonine), Mikhail T1 - Experimental study of longitudinal, transverse and volume strains of magnetoactive elastomeric cylinders in uniform magnetic fields JF - Journal of Magnetism and Magnetic Materials N2 - Magnetoactive elastomers (MAEs) are promising materials for realization of magnetic field-controlled soft actuators. Herein, a systematic investigation of magnetic field-induced macroscopic deformations of soft MAE cylinders with a diameter of 15 mm in uniform quasi-static magnetic fields directed parallel to the cylinder’s axis is reported. The measurements were based on image processing. Thirty-six MAE samples differing in the weight fraction of the iron filler (70 wt%, 75 wt% and 80 wt%), alignment of filling particles, and the aspect ratio (0.2, 0.4, 0.6, 0.8, 1.0 and 1.2) were fabricated. MAE cylinders exhibited high relative change in height (up to 35% in the field of 485 kA/m) and lateral contraction. The dependence of the maximum extensional strain on the aspect ratio was obtained and compared with theoretical considerations. A concave dent was formed on the free circular base in magnetic fields. This concavity was characterized experimentally. A significant volumetric strain of the order of magnitude of 10% was calculated in MAEs for the first time. In consequently repeated magnetization cycles, the remanent extensional strain significantly increased after each cycle. The results are qualitatively discussed in the framework of the modern views on the magnetically induced macroscopic deformations of MAEs. The directions of further research are outlined. Y1 - 2023 U6 - https://doi.org/10.1016/j.jmmm.2023.170826 SN - 0304-8853 VL - 579 PB - Elsevier ER - TY - JOUR A1 - Hörner, Eduard A1 - Krykanov, Ivan M. A1 - Chashin, Dmitri V. A1 - Fetisov, Yuri K. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Magnetoelectric characteristics of cobalt-iron alloy–lead zirconate titanate bilayer planar structures JF - International Journal of Materials Research N2 - The characteristics of both direct and converse magnetoelectric (ME) interactions in bilayer composite structures comprising layers of a commercially available magnetostrictive permendur CoFe alloy and different piezoelectric PZT ceramics are investigated in detail by the method of harmonic field modulation. It is shown that, given the optimum DC magnetic bias field, a high piezomagnetic coefficient in the alloy leads to increased efficiency of ME interactions. The resonant behavior of frequency dependencies of the magnetoelectric voltage is explained by excitation of bending and planar mechanical oscillations in the structures. The results are of interest for developing highly sensitive AC magnetic field sensors and magnetoelectric transducers for energy harvesting from mechanical vibrations. KW - Composite materials KW - Magnetostriction KW - Piezoelectricity KW - Magnetically ordered materials KW - Magnetoelectric effect Y1 - 2012 U6 - https://doi.org/10.3139/146.110776 VL - 103 IS - 11 PB - De Gruyter ER - TY - JOUR A1 - Straus, Izidor A1 - Kokot, Gašper A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Kriegl, Raphael A1 - Shamonin (Chamonine), Mikhail A1 - Jezeršek, Matija A1 - Drevenšek‐Olenik, Irena T1 - Dynamically tunable lamellar surface structures from magnetoactive elastomers driven by a uniform magnetic field JF - Soft Matter N2 - Stimuli responsive materials are key ingredients for any application that requires dynamically tunable or on-demand responses. In this work we report experimental and theoretical investigation of magnetic-field driven modifications of soft-magnetic elastomers whose surface was processed by laser ablation into lamellar microstructures that can be manipulated by a uniform magnetic field. We present a minimal hybrid model that elucidates the associated deflection process of the lamellae and explains the lamellar structure frustration in terms of dipolar magnetic forces arising from the neighbouring lamellae. We experimentally determine the magnitude of the deflection as a function of magnetic flux density and explore the dynamic response of lamellae to fast changes in a magnetic field. A relationship between the deflection of lamellae and modifications of the optical reflectance of the lamellar structures is resolved. KW - Intelligente Materialien Y1 - 2023 U6 - https://doi.org/10.1039/D3SM00012E VL - Vol. 19 SP - 3357 EP - 3365 PB - Royal Society of Chemistry ER - TY - JOUR A1 - Straus, Izidor A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Kriegl, Raphael A1 - Jezeršek, Matija A1 - Shamonin (Chamonine), Mikhail A1 - Drevenšek‐Olenik, Irena A1 - Kokot, Gašper T1 - Surface Modification of Magnetoactive Elastomers by Laser Micromachining JF - Materials N2 - It has been recently demonstrated that laser micromachining of magnetoactive elastomers is a very convenient method for fabricating dynamic surface microstructures with magnetically tunable properties, such as wettability and surface reflectivity. In this study, we investigate the impact of the micromachining process on the fabricated material’s structural properties and its chemical composition. By employing scanning electron microscopy, we investigate changes in size distribution and spatial arrangement of carbonyl iron microparticles dispersed in the polydimethylsiloxane (PDMS) matrix as a function of laser irradiation. Based on the images obtained by a low vacuum secondary electron detector, we analyze modifications of the surface topography. The results show that most profound modifications occur during the low-exposure (8 J/cm^2) treatment of the surface with the laser beam. Our findings provide important insights for developing theoretical models of functional properties of laser-sculptured microstructures from magnetoactive elastomers. KW - magnetoactive elastomer KW - MAE KW - laser micromachining KW - particle distributions KW - SEM Y1 - 2024 U6 - https://doi.org/10.3390/ma17071550 N1 - This research was funded by the Slovenian Research Agency (ARRS): research programs P1-0192, P2-0392, and research project J1-3006. The work of R.K. and M.S. in Regensburg was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), project number 437391117. VL - 2024 IS - 17 / 7 PB - MDPI AG CY - Basel, Switzerland ER - TY - CHAP A1 - Kriegl, Raphael A1 - Jezeršek, Matija A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Kokot, Gašper A1 - Drevenšek‐Olenik, Irena A1 - Shamonin (Chamonine), Mikhail T1 - Characterization of Tunable Rebound Properties of Microstructured Magnetoactive Elastomers T2 - ASME 2024 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), September 9–11, 2024, Atlanta, Georgia, USA N2 - We present a novel method to control the rebounding behavior of small mm-sized solid balls by employing magnetoactive elastomers (MAEs) with microstructured surfaces. An MAE is a composite material consisting of μm-sized ferromagnetic particles dispersed in a soft elastomer (e.g., polydimethylsiloxane) matrix. In the act of rebounding, the ball hits an MAE surface and bounces back. The MAE samples contained 75 wt.% of iron. This composite material is known to respond to an applied magnetic field with increased stiffness (due to the magnetorheological effect) and plasticity. To adjust the rebound properties, the top layer of the MAE material was additionally modified by micromachining lamellar structures with different dimensions on the 100 μm scale via laser ablation. Due to the resulting high aspect ratio, these surface structures were sensitive to the magnetic field direction. The lamellas could stand up straight or lay down flat. The rebound behavior was evaluated by using a custom build apparatus that facilitates dropping of the balls in a precise and repeatable manner. A ball was dropped from different heights. The ball trajectory was captured with a high-speed camera to investigate the rebound properties. The recorded video was processed using a custom software written in Python. The experimental procedure and data processing algorithms are presented in detail. The results for the samples with different geometrical dimensions are provided as examples. It is made evident that the magnetic field influences the rebound properties of small non-magnetic balls impinging microstructured MAE surfaces. The change in surface topography is an effective way to control the ball rebound. The fabrication flexibility in geometrical dimensions of surface microstructures opens a convenient way to tune the desired response to magnetic fields. The presented idea may find applications in impact mitigation or small-scale sorting machinery, e.g. for recycling. Y1 - 2024 SN - 978-0-7918-8832-2 U6 - https://doi.org/10.1115/SMASIS2024-139154 PB - American Society of Mechanical Engineers CY - New York, USA ER - TY - JOUR A1 - Lovšin, Matija A1 - Brandl, Dominik A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Cmok, Luka A1 - Coga, Lucija A1 - Kalin, Mitjan A1 - Shamonin (Chamonine), Mikhail A1 - Drevenšek‐Olenik, Irena T1 - Reconfigurable Surface Micropatterns Based on the Magnetic Field-Induced Shape Memory Effect in Magnetoactive Elastomers JF - Polymers N2 - A surface relief grating with a period of 30 mu m is embossed onto the surface of magnetoactive elastomer (MAE) samples in the presence of a moderate magnetic field of about 180 mT. The grating, which is represented as a set of parallel stripes with two different amplitude reflectivity coefficients, is detected via diffraction of a laser beam in the reflection configuration. Due to the magnetic-field-induced plasticity effect, the grating persists on the MAE surface for at least 90 h if the magnetic field remains present. When the magnetic field is removed, the diffraction efficiency vanishes in a few minutes. The described effect is much more pronounced in MAE samples with larger content of iron filler (80 wt%) than in the samples with lower content of iron filler (70 wt%). A simple theoretical model is proposed to describe the observed dependence of the diffraction efficiency on the applied magnetic field. Possible applications of MAEs as magnetically reconfigurable diffractive optical elements are discussed. It is proposed that the described experimental method can be used as a convenient tool for investigations of the dynamics of magnetically induced plasticity of MAEs on the micrometer scale. KW - ADHESION KW - friction KW - magnetoactive elastomers KW - magnetorheological elastomer KW - optical diffraction KW - shape memory effect KW - surface microstructuring KW - TEMPERATURE Y1 - 2021 U6 - https://doi.org/10.3390/polym13244422 VL - 13 IS - 24 PB - MDPI ER - TY - CHAP A1 - Holthaus, Carsten A1 - Hagedorn, Oliver A1 - Klank, Michael A1 - Shamonin (Chamonine), Mikhail A1 - Trifonov, A. A1 - Dötsch, Horst T1 - Preparation and Characterization of Sensitive Magnetic Garnet Films for MOI Applications T2 - Magneto-Optical Imaging. Proceedings of the NATO Advanced Research Workshop on Magneto-Optical Imaging, Øystese, Norway, 28 - 30 August 2003 N2 - Magnetic garnet films prepared by liquid phase epitaxy on paramagnetic substrates of gadolinium gallium garnet are currently used for the imaging of magnetic field distributions. This application is based on the Faraday rotation which can be strongly enhanced by bismuth incorporation. For gray scale imaging the plane of the sensor film should be an easy plane of magnetization so that no domains nucleate. However, incorporation of bismuth induces a strong positive uniaxial anisotropy perpendicular to the film plane, especially if films of [111] orientation are used. To counteract this unwanted behavior neodymium and/or praseodymium are substituted in addition to bismuth. These two elements cause a very strong negative anisotropy. This is tested experimentally by growing series of garnet films with gradually changing composition and growth parameters. KW - Magneto-optics KW - Imaging KW - Garnet films Y1 - 2004 U6 - https://doi.org/10.1007/978-94-007-1007-8_42 SP - 329 EP - 336 PB - Kluwer CY - Dodrecht ER - TY - JOUR A1 - Bodnaruk, Andrii V. A1 - Brunhuber, Alexander A1 - Kalita, Viktor M. A1 - Kulyk, Mykola M. A1 - Snarskii, Andrei A. A1 - Lozenko, Albert F. A1 - Ryabchenko, Sergey M. A1 - Shamonin (Chamonine), Mikhail T1 - Temperature-dependent magnetic properties of a magnetoactive elastomer: Immobilization of the soft-magnetic filler JF - Journal of Applied Physics N2 - The magnetic properties of a magnetoactive elastomer (MAE) filled with mu m-sized soft-magnetic iron particles have been experimentally studied in the temperature range between 150 K and 310 K. By changing the temperature, the elastic modulus of the elastomer matrix was modified, and it was possible to obtain magnetization curves for an invariable arrangement of particles in the sample and in the case when the particles were able to change their position within the MAE under the influence of magnetic forces. At low (less than 220 K) temperatures, when the matrix becomes rigid, the magnetization of the MAE does not show a hysteresis behavior, and it is characterized by a negative value of the Rayleigh constant. At room temperature, when the polymer matrix is compliant, a magnetic hysteresis exists where the dependence of the differential magnetic susceptibility on the magnetic field exhibits local maxima. The appearance of these maxima is explained by the elastic resistance of the matrix to the displacement of particles under the action of magnetic forces. KW - BEHAVIOR KW - composites KW - FIELD KW - GELS KW - hysteresis KW - Magnetorheological elastomers KW - MICROSTRUCTURE KW - PERMEABILITY KW - RAYLEIGH LAW KW - STRAIN Y1 - 2018 U6 - https://doi.org/10.1063/1.5023891 VL - 123 IS - 11 PB - AIP Publishing ER - TY - JOUR A1 - Scharfenberg, Georg A1 - Mottok, Jürgen A1 - Artmann, Christina A1 - Hobelsberger, Martin A1 - Paric, Ivan A1 - Großmann, Benjamin A1 - Pohlt, Clemens A1 - Wackerbarth, Alena A1 - Pausch, Uli A1 - Heidrich, Christiane A1 - Fadanelli, Martin A1 - Elsner, Michael A1 - Pöcher, Daniel A1 - Pittroff, Lenz A1 - Beer, Stefan A1 - Brückl, Oliver A1 - Haslbeck, Matthias A1 - Sterner, Michael A1 - Thema, Martin A1 - Muggenthaler, Nicole A1 - Lenck, Thorsten A1 - Götz, Philipp A1 - Eckert, Fabian A1 - Deubzer, Michael A1 - Stingl, Armin A1 - Simsek, Erol A1 - Krämer, Stefan A1 - Großmann, Benjamin A1 - Schlegl, Thomas A1 - Niedersteiner, Sascha A1 - Berlehner, Thomas A1 - Joblin, Mitchell A1 - Mauerer, Wolfgang A1 - Apel, Sven A1 - Siegmund, Janet A1 - Riehle, Dirk A1 - Weber, Joachim A1 - Palm, Christoph A1 - Zobel, Martin A1 - Al-Falouji, Ghassan A1 - Prestel, Dietmar A1 - Scharfenberg, Georg A1 - Mandl, Roland A1 - Deinzer, Arnulf A1 - Halang, W. A1 - Margraf-Stiksrud, Jutta A1 - Sick, Bernhard A1 - Deinzer, Renate A1 - Scherzinger, Stefanie A1 - Klettke, Meike A1 - Störl, Uta A1 - Wiech, Katharina A1 - Kubata, Christoph A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. A1 - Dollinger, Markus A1 - Dembianny, Sven A1 - Kölbl, Andreas A1 - Welker, Franz A1 - Meier, Matthias A1 - Thumann, Philipp A1 - Swidergal, Krzysztof A1 - Wagner, Marcus A1 - Haug, Sonja A1 - Vernim, Matthias A1 - Seidenstücker, Barbara A1 - Weber, Karsten A1 - Arsan, Christian A1 - Schone, Reinhold A1 - Münder, Johannes A1 - Schroll-Decker, Irmgard A1 - Dillinger, Andrea Elisabeth A1 - Fuchshofer, Rudolf A1 - Monkman, Gareth J. A1 - Shamonin (Chamonine), Mikhail A1 - Geith, Markus A. A1 - Koch, Fabian A1 - Ühlin, Christian A1 - Schratzenstaller, Thomas A1 - Saßmannshausen, Sean Patrick A1 - Auchter, Eberhard A1 - Kriz, Willy A1 - Springer, Othmar A1 - Thumann, Maria A1 - Kusterle, Wolfgang A1 - Obermeier, Andreas A1 - Udalzow, Anton A1 - Schmailzl, Anton A1 - Hierl, Stefan A1 - Langer, Christoph A1 - Schreiner, Rupert ED - Baier, Wolfgang T1 - Forschungsbericht 2015 T3 - Forschungsberichte der OTH Regensburg - 2015 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-13867 SN - 978-3-00-048589-3 CY - Regensburg ER - TY - JOUR A1 - Shamonin (Chamonine), Mikhail A1 - Klank, Michael A1 - Hagedorn, Oliver A1 - Dötsch, Horst T1 - Magneto-optical visualization of metal-loss defects in a ferromagnetic plate: experimental verification of theoretical modeling JF - Applied optics N2 - Rare-earth iron garnet films with in-plane magnetic anisotropy grown on [111]-oriented substrates are promising for the visualization of magnetic leakage fields in nondestructive evaluation. Such magneto-optical films have to be specifically engineered, and we give an example of this technology. To assess the validity and accuracy of finite-element calculations of a magnetization assembly combined with the physical modeling of the image formation, comparisons between calculated and experimentally obtained magneto-optical images of metal-loss defects have been made. A convincing quantitative agreement is demonstrated. It is shown that both physical and computer modeling techniques allow for a predictive engineering design of the prospective applications and provide greater insight into the method. Y1 - 2001 U6 - https://doi.org/10.1364/ao.40.003182 VL - 40 IS - 19 SP - 3182 EP - 3189 PB - Optica Publishing Group ER -