TY - JOUR A1 - Snarskii, Andrei A. A1 - Zhenirovskyy, M. I. A1 - Shamonin (Chamonine), Mikhail T1 - The effective properties of macroscopically nonuniform ferromagnetic composites: Theory and numerical experiment JF - Journal of Experimental and Theoretical Physics N2 - Various theoretical models (self-consistent field, local linearization, and percolation theory methods and an analytic solution of the linear problem for an ordered medium) for calculating the magnetostatic properties of two-phase composites containing one ferromagnetic phase were considered. The concentration and field dependences of the effective magnetic permeability were found. A method for determining the coercive force and remanent magnetization as functions of the ferromagnetic phase concentration was suggested. Numerical experiments were performed for composites with a periodic distribution of circular inclusions. The results were compared with the analytically calculated effective magnetic permeability. KW - Numerical Experiment KW - Remanent Magnetization KW - Field Dependence KW - Coercive Force KW - Magnetic Permeability Y1 - 2003 U6 - https://doi.org/10.1134/1.1545385 VL - 96 SP - 66 EP - 77 PB - Springer ER - TY - JOUR A1 - Sorokin, Vladislav V. A1 - Stepanov, Gennady V. A1 - Shamonin (Chamonine), Mikhail A1 - Monkman, Gareth J. A1 - Khokhlov, Alexei R. A1 - Kramarenko, Elena Yu T1 - Hysteresis of the viscoelastic properties and the normal force in magnetically and mechanically soft magnetoactive elastomers: Effects of filler composition, strain amplitude and magnetic field JF - Polymer N2 - Hysteresis in dynamic modulus, loss factor and normal forces of magnetoactive elastomers (MAEs) comprising various proportions of small (3-5 mu m) and large (50-60 mu m) ferromagnetic particles are experimentally studied using dynamic torsion performed at a fixed oscillation frequency in varying DC magnetic fields. It is shown that hysteresis is a characteristic feature of MAEs observed both under increasing/decreasing magnetic field strength and increasing/decreasing strain amplitude. This hysteresis is attributed to the specific rearrangement of the magnetic filler network under simultaneously applied magnetic field and shear deformation. Rheological properties of the magnetic filler network formed in the magnetic field and, therefore, the rheological properties of MAEs depend strongly on the filler composition and the magnetic field magnitude. Larger magnetic particles and higher magnetic fields provide stronger magnetic networks. Both factors result in the extension of the linear viscoelastic regime to larger strain amplitudes and lead to higher values of shear storage and loss moduli. It is found that the hysteresis width maximises at an intermediate magnetic field where it is attributed to the balance between elastic and magnetic particle interactions. This is apparently where the most significant restructuring of the magnetic network occurs. The hysteresis width decreases with increasing fraction of large particles in the magnetic filler. The loss factor grows significantly when the magnetic network is physically broken by large strains gamma > 1%. A huge (more than one order of magnitude) increase of normal force at maximum magnetic field strengths is observed. It is predicted that any physical quantity depending on the internal structuring of the magnetic filler should demonstrate hysteresis either with a changing magnetic field and constant deformation amplitude or under variable deformation in a constant magnetic field. (C) 2015 Elsevier Ltd. All rights reserved. KW - BEHAVIOR KW - COMPRESSION KW - Dynamic modulus KW - GELS KW - hysteresis KW - Magnetorheological elastomers KW - magnetostriction KW - MODULUS KW - PARTICLES KW - POLYMER COMPOSITES KW - shear Y1 - 2015 U6 - https://doi.org/10.1016/j.polymer.2015.08.040 VL - 76 SP - 191 EP - 202 PB - Elsevier ER - TY - JOUR A1 - Filippov, O. A1 - Ringhofer, K. H. A1 - Shamonin (Chamonine), Mikhail A1 - Shamonina, Ekaterina A1 - Kamshilin, A. A. A1 - Nippolainen, E. A1 - Sturman, B. I. T1 - Polarization properties of light-induced scattering in Bi12TiO20 crystals: theory and experiment for diagonal geometry JF - Journal of the Optical Society of America B N2 - Illumination of ac-biased photorefractive Bi12TiO20 crystals with a coherent light beam results in the development of strong nonlinear scattering. Theoretically and experimentally we investigate the angular and polarization characteristics of the scattered light for the diagonal ([1̲1̲1]) optical configuration and different polarization states of the pump. A satisfactory understanding of the observed scattering properties is achieved for most of the cases investigated. Y1 - 2003 U6 - https://doi.org/10.1364/JOSAB.20.000677 VL - 20 IS - 4 SP - 677 EP - 684 PB - Optica Publishing Group ER - TY - JOUR A1 - Filippov, O. A1 - Ringhofer, K. H. A1 - Shamonin (Chamonine), Mikhail A1 - Shamonina, Ekaterina A1 - Kamshilin, A. A. A1 - Nippolainen, E. A1 - Sturman, B. I. T1 - Polarization properties of light-induced scattering in Bi_12TiO_20 crystals BT - theory and experiment for diagonal geometry JF - Journal of the Optical Society of America B N2 - Illumination of ac-biased photorefractive Bi12TiO20 crystals with a coherent light beam results in the development of strong nonlinear scattering. Theoretically and experimentally we investigate the angular and polarization characteristics of the scattered light for the diagonal ([1̲1̲1]) optical configuration and different polarization states of the pump. A satisfactory understanding of the observed scattering properties is achieved for most of the cases investigated. Y1 - 2003 U6 - https://doi.org/10.1364/josab.20.000677 VL - 20 IS - 4 PB - Optica Publishing Group ER - TY - JOUR A1 - Kriegl, Raphael A1 - Kovalev, Alexander A1 - Shamonin (Chamonine), Mikhail A1 - Gorb, Stanislav T1 - Tunable contact angle hysteresis on compliant magnetoactive elastomers JF - Extreme Mechanics Letters N2 - It is shown that the advancing (ACA) and receding (RCA) contact angles of water on extremely soft (shear modulus of the order of 10 kPa) magnetoactive elastomer (MAE) films significantly depend on the applied magnetic field. The difference between these angles, known as the contact angle hysteresis, is examined. The roles of the filler concentration and material softness are elaborated. The highest change in the contact angle hysteresis (CAH) from 34° in the absence of magnetic field to 76° in a magnetic field of 0.4 T is achieved for the softest sample with the lowest mass fraction of iron particles (70 wt%). The dependence of the CAH on magnetization history (“magnetic hysteresis”) is observed. This magnetic hysteresis is clearly pronounced for the ACA and has little effect on the RCA. Magnetic field-induced changes of the surface roughness exhibit qualitatively the same hysteresis behavior with regard to the external magnetic field as the ACA. The results are promising for the development of smart surfaces for applications where the dynamic wetting has to be controlled. KW - Magnetoactive elastomers KW - Dynamic wetting KW - Magnetic hysteresis KW - Contact angle hysteresis Y1 - 2023 U6 - https://doi.org/10.1016/j.eml.2023.102049 SN - 2352-4316 VL - 63 PB - Elsevier ER - TY - JOUR A1 - Radkovskaya, Anna A. A1 - Shamonin (Chamonine), Mikhail A1 - Stevens, Chris J. A1 - Faulkner, Grahame A1 - Edwards, David J. A1 - Shamonina, Ekaterina A1 - Solymar, L. T1 - Resonant frequencies of a combination of split rings: Experimental, analytical and numerical study JF - Microwave and Optical Technoly Letters N2 - The resonant frequencies of five different ring resonators are measured with the aid of a network analyser within the frequency range of about 1.5 to 2.8 GHz. The resonant frequencies for those configurations are also determined from numerical calculations using the commercially available MICRO-STRIPES package. The experimental and numerical results are shown to be very close to each other. Analytical results from various authors, available for three of the configurations, are also compared with the experimental results; one of them leads to a large discrepancy, but the other analytical approximations are shown to be not too far off. Y1 - 2005 U6 - https://doi.org/10.1002/mop.21021 VL - 46 IS - 5 SP - 473 EP - 476 PB - Wiley ER - TY - JOUR A1 - Dechant, Eduard A1 - Fedulov, Feodor A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Bandwidth Widening of Piezoelectric Cantilever Beam Arrays by Mass-Tip Tuning for Low-Frequency Vibration Energy Harvesting JF - Applied Science N2 - Wireless sensor networks usually rely on internal permanent or rechargeable batteries as a power supply, causing high maintenance efforts. An alternative solution is to supply the entire system by harvesting the ambient energy, for example, by transducing ambient vibrations into electric energy by virtue of the piezoelectric effect. The purpose of this paper is to present a simple engineering approach for the bandwidth optimization of vibration energy harvesting systems comprising multiple piezoelectric cantilevers (PECs). The frequency tuning of a particular cantilever is achieved by changing the tip mass. It is shown that the bandwidth enhancement by mass tuning is limited and requires several PECs with close resonance frequencies. At a fixed frequency detuning between subsequent PECs, the achievable bandwidth shows a saturation behavior as a function of the number of cantilevers used. Since the resonance frequency of each PEC is different, the output voltages at a particular excitation frequency have different amplitudes and phases. A simple power-transfer circuit where several PECs with an individual full wave bridge rectifier are connected in parallel allows one to extract the electrical power close to the theoretical maximum excluding the diode losses. The experiments performed on two- and three-PEC arrays show reasonable agreement with simulations and demonstrate that this power-transfer circuit additionally influences the frequency dependence of the harvested electrical power. KW - array KW - BAND-PASS FILTERS KW - bandwidth KW - BIMORPH KW - Optimization KW - OUTPUT KW - PERFORMANCE KW - piezoelectric cantilever KW - POWER KW - vibration energy harvesting Y1 - 2017 U6 - https://doi.org/10.3390/app7121324 N1 - Corresponding Author: Mikhail Shamonin VL - 7 IS - 12 PB - MDPI ER - TY - JOUR A1 - Kreitmeier, Florian A1 - Chashin, Dmitri V. A1 - Fetisov, Yuri K. A1 - Fetisov, Leonid Y. A1 - Schulz, Irene A1 - Monkman, Gareth J. A1 - Shamonin (Chamonine), Mikhail T1 - Nonlinear Magnetoelectric Response of Planar Ferromagnetic-Piezoelectric Structures to Sub-Millisecond Magnetic Pulses JF - Sensors N2 - The magnetoelectric response of bi- and symmetric trilayer composite structures to pulsed magnetic fields is experimentally investigated in detail. The structures comprise layers of commercially available piezoelectric (lead zirconate titanate) and magnetostrictive (permendur or nickel) materials. The magnetic-field pulses have the form of a half-wave sine function with duration of 450 µs and amplitudes ranging from 500 Oe to 38 kOe. The time dependence of the resulting voltage is presented and explained by theoretical estimations. Appearance of voltage oscillations with frequencies much larger than the reciprocal pulse length is observed for sufficiently large amplitudes (~1-10 kOe) of the magnetic-field pulse. The origin of these oscillations is the excitation of bending and planar acoustic oscillations in the structures. Dependencies of the magnetoelectric voltage coefficient on the excitation frequency and the applied magnetic field are calculated by digital signal processing and compared with those obtained by the method of harmonic field modulation. The results are of interest for developing magnetoelectric sensors of pulsed magnetic fields as well as for rapid characterization of magnetoelectric composite structures. Y1 - 2012 U6 - https://doi.org/10.3390/s121114821 N1 - Corresponding author: Mikhail Shamonin VL - 12 IS - 11 SP - 14821 EP - 14837 PB - MDPI CY - Basel ER - TY - JOUR A1 - Apelsmeier, Andreas A1 - Gleixner, Ramona A1 - Mayer, Matthias A1 - Shamonin (Chamonine), Mikhail A1 - Schmauss, Bernhard T1 - Intensity referencing in an extrinsic optical fiber temperature sensor JF - Procedia Engineering N2 - Optical fiber sensors based on intensity measurement require some form of intensity referencing to avoid errors arising from parasitic losses. Known techniques of referencing such as balanced bridge, divided beam systems or two-wavelength referencing are not suitable for low-cost applications since they use relatively complicated optical components such as multiple LED sources, couplers, filters etc. In this work a novel method of referencing in an extrinsic optical fiber sensor system utilizing temperature dependence of absorption edge in a semiconductor crystal is described. The sensor system comprises a single LED source and no optical fiber junctions. The emission spectrum of an LED depends on its temperature. The reference is provided by controlling the temperature of an LED source and transmission measurements with different emission spectra. The entire process is controlled by a microprocessor unit. Performance of a sensor system is investigated and it is shown that the losses in connectors may be compensated for. KW - Extrinsic optical fiber sensor KW - Intensity referencing KW - Temperature measurement KW - Absorption edge KW - Semiconductor KW - Hot-spot measurement Y1 - 2010 U6 - https://doi.org/10.1016/j.proeng.2010.09.301 VL - 5 SP - 1095 EP - 1098 PB - Elsevier ER - TY - JOUR A1 - Snarskii, Andrei A. A1 - Shamonin (Chamonine), Mikhail A1 - Zhenirovskyy, M. I. A1 - Trautner, Ralph T1 - Effect of disorder on the conductivity of two-phase strongly inhomogeneous highly filled composites JF - Theoretical and Mathematical Physics N2 - The effect of the “stir” of a structure (small deviations from strict periodicity) on effective conductivity is considered. For determinate and random deviations, concentration and field dependences of the effective conductivity are found. Numerical experiments with determinate deviations are carried out for the cases of linear (with respect to the field) inclusions embedded in both a linear and nonlinear matrix. The numerical results are compared with the effective conductivity calculated analytically. KW - Small Deviation KW - Numerical Experiment KW - Field Dependence KW - Effective Conductivity KW - Random Deviation Y1 - 2005 U6 - https://doi.org/10.1134/1.1854818 VL - 50 SP - 11 EP - 18 PB - Springer ER - TY - JOUR A1 - Radkovskaya, Anna A. A1 - Shamonin (Chamonine), Mikhail A1 - Stevens, Chris J. A1 - Faulkner, Grahame A1 - Edwards, David J. A1 - Shamonina, Ekaterina A1 - Solymar, L. T1 - An experimental study of the properties of magnetoinductive waves in the presence of retardation JF - Journal of Magnetism and Magnetic Materials N2 - Magnetoinductive (MI) waves owe their existence to the magnetic coupling between metamaterial elements. First experiments confirming the existence of MI waves were carried out on capacitively loaded loops and Swiss Rolls about three orders of magnitude smaller than the operating wavelengths (5–15 m) so that the radiation effects did not play any significant role. In the present paper MI waves are studied experimentally on various types of split ring resonators of about 1 cm diameter operating in the microwave region between 1 and 2 GHz. Our results prove that retardation has a significant effect upon the propagation of MI waves. Y1 - 2006 U6 - https://doi.org/10.1103/physrevb.73.224406 VL - 300 IS - 1 SP - 29 EP - 32 PB - Elsevier ER - TY - JOUR A1 - Snarskii, Andrei A. A1 - Shamonin (Chamonine), Mikhail A1 - Yuskevich, Pavel T1 - Effect of magnetic-field-induced restructuring on the elastic properties of magnetoactive elastomers JF - Journal of Magnetism and Magnetic Materials N2 - Composite materials where magnetic micrometer-sized particles are embedded into a compliant polymer matrix are known as magnetorheological (or magnetoactive) elastomers (MAEs). They are distinguished by huge variations in their physical properties, when in a magnetic field, which is commonly attributed to the restructuring of the filler. The process of the magnetic-field-induced restructuring in a magnetorheological elastomer is interpreted as progression towards percolation. Such a physical model was previously used to explain the dependence of the magnetic permeability and dielectric permittivity of MAEs on the magnetic field strength. Based on this hypothesis, the magnetorheological effect in MAEs is considered theoretically. The theoretical approach is built upon a self-consistent effective-medium theory for the elastic properties, extended to the variable (field dependent) percolation threshold. The proposed model allows one to describe the large variations (over several orders of magnitude) of the effective elastic moduli of these composite materials, known as the giant magnetorheological (MR) and field-stiffening effects. The existence of a giant magnetic Poisson effect is predicted. The relation of the proposed model to the existing theories of the MR effect in MAEs is discussed. The results can be useful for applications of MAEs in magnetic-field-controlled vibration dampers and isolators. Y1 - 2021 U6 - https://doi.org/10.1016/j.jmmm.2020.167392 IS - 517, January PB - Elsevier ER - TY - JOUR A1 - Snarskii, Andrei A. A1 - Shamonin (Chamonine), Mikhail A1 - Yuskevich, Pavel T1 - Effective medium theory for the elastic properties of composite materials with various percolation thresholds JF - Materials N2 - It is discussed that the classical effective medium theory for the elastic properties of random heterogeneous materials is not congruous with the effective medium theory for the electrical conductivity. In particular, when describing the elastic and electro-conductive properties of a strongly inhomogeneous two-phase composite material, the steep rise of effective parameters occurs at different concentrations. To achieve the logical concordance between the cross-property relations, a modification of the effective medium theory of the elastic properties is introduced. It is shown that the qualitative conclusions of the theory do not change, while a possibility of describing a broader class of composite materials with various percolation thresholds arises. It is determined under what conditions there is an elasticity theory analogue of the Dykhne formula for the effective conductivity. The theoretical results are supported by known experiments and show improvement over the existing approach. The introduction of the theory with the variable percolation threshold paves the way for describing the magnetorheological properties of magnetoactive elastomers. A similar approach has been recently used for the description of magneto-dielectric and magnetic properties. KW - elastic properties KW - effective medium approximation KW - self-consistent KW - random heterogeneous medium KW - two-phase composite material KW - percolation threshold Y1 - 2020 U6 - https://doi.org/10.3390/ma13051243 VL - 13 IS - 5 SP - 1 EP - 19 PB - MPDI CY - Basel ER - TY - JOUR A1 - Kahl, Matthias A1 - Krause, Veronika A1 - Hackenberg, Rudolf A1 - Ul Haq, Anwar A1 - Horn, Anton A1 - Jacobsen, Hans-Arno A1 - Kriechbaumer, Thomas A1 - Petzenhauser, Michael A1 - Shamonin (Chamonine), Mikhail A1 - Udalzow, Anton T1 - Measurement system and dataset for in-depth analysis of appliance energy consumption in industrial environment JF - tm - Technisches Messen N2 - To support a rational and efficient use of electrical energy in residential and industrial environments, Non-Intrusive Load Monitoring (NILM) provides several techniques to identify state and power consumption profiles of connected appliances. Design requirements for such systems include a low hardware and installations costs for residential, reliability and high-availability for industrial purposes, while keeping invasive interventions into the electrical infrastructure to a minimum. This work introduces a reference hardware setup that allows an in depth analysis of electrical energy consumption in industrial environments. To identify appliances and their consumption profile, appropriate identification algorithms are developed by the NILM community. To enable an evaluation of these algorithms on industrial appliances, we introduce the Laboratory-measured IndustriaL Appliance Characteristics (LILAC) dataset: 1302 measurements from one, two, and three concurrently running appliances of 15 appliance types, measured with the introduced testbed. To allow in-depth appliance consumption analysis, measurements were carried out with a sampling rate of 50 kHz and 16-bit amplitude resolution for voltage and current signals. We show in experiments that signal signatures, contained in the measurement data, allows one to distinguish the single measured electrical appliances with a baseline machine learning approach of nearly 100% accuracy. KW - appliance monitoring KW - DAQ KW - NILM Y1 - 2019 U6 - https://doi.org/10.1515/teme-2018-0038 VL - 86 IS - 1 SP - 1 EP - 13 PB - De Gruyter ER - TY - JOUR A1 - Kostrov, Sergei A. A1 - Shamonin (Chamonine), Mikhail A1 - Stepanov, Gennady V. A1 - Kramarenko, Elena Yu T1 - Magnetodielectric Response of Soft Magnetoactive Elastomers: Effects of Filler Concentration and Measurement Frequency JF - International Journal of Molecular Sciences N2 - The magnetodielectric response of magnetoactive elastomers (MAEs) in its dependence on filler concentration, magnetic field, and test frequency is studied experimentally. MAEs are synthesized on the basis of a silicone matrix filled with spherical carbonyl iron particles characterized by a mean diameter of 4.5 mu m. The concentration of the magnetic filler within composite materials is equal to 70, 75, and 80 mass%. The effective lossless permittivity epsilon as well as the dielectric loss tan grow significantly when the magnetic field increases. The permittivity increases and the dielectric loss decreases with increasing filler concentration. In the measurement frequency range between 1 kHz and 200 kHz, the frequency hardly affects the values of epsilon and tan in the absence of a magnetic field. However, both parameters decrease considerably with the growing frequency in a constant magnetic field. The more strongly the magnetic field is applied, the larger the change in permittivity and loss tangent at the same test frequency is observed. An equivalent circuit formulation qualitatively describes the main tendencies of the magnetodielectric response. KW - dielectric loss KW - magnetic filler KW - MAGNETIC-FIELD KW - magnetoactive elastomers KW - magnetodielectric effect KW - permittivity Y1 - 2019 U6 - https://doi.org/10.3390/ijms20092230 VL - 20 IS - 9 SP - 1 EP - 13 PB - MDPI CY - Basel ER - TY - JOUR A1 - Kurzweil, Peter A1 - Shamonin (Chamonine), Mikhail T1 - State-of-Charge Monitoring by Impedance Spectroscopy during Long-Term Self-Discharge of Supercapacitors and Lithium-Ion Batteries JF - Batteries N2 - Frequency-dependent capacitance C(ω) is a rapid and reliable method for the determination of the state-of-charge (SoC) of electrochemical storage devices. The state-of-the-art of SoC monitoring using impedance spectroscopy is reviewed, and complemented by original 1.5-year long-term electrical impedance measurements of several commercially available supercapacitors. It is found that the kinetics of the self-discharge of supercapacitors comprises at least two characteristic time constants in the range of days and months. The curvature of the Nyquist curve at frequencies above 10 Hz (charge transfer resistance) depends on the available electric charge as well, but it is of little use for applications. Lithium-ion batteries demonstrate a linear correlation between voltage and capacitance as long as overcharge and deep discharge are avoided. KW - aging KW - capacitance KW - self-discharge KW - state-of-charge monitoring KW - supercapacitor Y1 - 2018 U6 - https://doi.org/10.3390/batteries4030035 VL - 4 IS - 3 SP - 1 EP - 13 PB - MPDI ER - TY - JOUR A1 - Baumer, Johannes A1 - Shamonin (Chamonine), Mikhail T1 - Abstandsensorsystem basierend auf dem Prinzip der optischen Reflektion für Anwendungen im Bereich Weiße Ware: Intensitätsreferenzierung und Linearisierung des Ausgnagssignals JF - TM - Technisches Messen N2 - Ein auf optischer Reflektion basierendes Abstandssensorsystem für die „Weiße Ware“ wird hier vorgestellt. Die technische Lösung greift auf ein allseits bekanntes Intensitätsreferenzierungsprinzip – die optische Brücke – zurück. Der Einfluss der Umgebungstemperatur kann kompensiert werden. Störeffekte wie alterungsbedingte Drift der optischen Elemente oder Systemvariationen der Empfindlichkeit verursacht durch die Streuung der einzelnen Komponenten können erfolgreich gehandhabt werden. Ein Algorithmus zur Ausgangslinearisierung und dessen Optimierung in Hinblick auf einen kostengünstigen Mikrokontroller wird beschrieben. Zum Schluss wird ein Prototyp eines Fertigungsautomaten, der zur Herstellung dieses Sensors dient, und dessen grundlegende Funktion vorgestellt. A reflective optical sensor system for distance measurements in white-goods applications is presented. The technical solution implements a well-known intensity referencing principle - the optical bridge - in a low-cost design. The influence of the ambient temperature can be compensated for. The spurious effects such as slow output drift caused by aging of optical components or the variation of the system sensitivity due to the parameter spreading of system components can be successfully overcome as well. An algorithm for linearizing the system response is described and optimized for a low-cost microcontroller. Finally, a prototype of an assembly line, which is used for producing this sensor system, is described and its basic funcionallity is demonstrated. T2 - Optical-reflection-based distance sensor system for white-goods applications: intensity referencing and response linearization KW - Fertigungskonzept KW - Kompensation von Störeffekten KW - Kostengünstiger Abstandssensor KW - Liearisierung der Sensorantwort KW - optische Reflektion Y1 - 2014 U6 - https://doi.org/10.1515/teme-2014-1014 VL - 81 IS - 2 SP - 62 EP - 69 PB - de Gruyter ER - TY - JOUR A1 - Stadler, Dominik A1 - Hofmann, Matthias J. A1 - Motschmann, Hubert A1 - Shamonin (Chamonine), Mikhail T1 - Automated system for measuring the surface dilational modulus of liquid-air interfaces JF - Measurement Science and Technology N2 - The surface dilational modulus is a crucial parameter for describing the rheological properties of aqueous surfactant solutions. These properties are important for many technological processes. The present paper describes a fully automated instrument based on the oscillating bubble technique. It works in the frequency range from 1 Hz to 500 Hz, where surfactant exchange dynamics governs the relaxation process. The originality of instrument design is the consistent combination of modern measurement technologies with advanced imaging and signal processing algorithms. Key steps on the way to reliable and precise measurements are the excitation of harmonic oscillation of the bubble, phase sensitive evaluation of the pressure response, adjustment and maintenance of the bubble shape to half sphere geometry for compensation of thermal drifts, contour tracing of the bubbles video images, removal of noise and artefacts within the image for improving the reliability of the measurement, and, in particular, a complex trigger scheme for the measurement of the oscillation amplitude, which may vary with frequency as a result of resonances. The corresponding automation and programming tasks are described in detail. Various programming strategies, such as the use of MATLAB (R) software and native C++ code are discussed. An advance in the measurement technique is demonstrated by a fully automated measurement. The instrument has the potential to mature into a standard technique in the fields of colloid and interface chemistry and provides a significant extension of the frequency range to established competing techniques and state-of-the-art devices based on the same measurement principle. KW - automated measurements KW - dilational modulus KW - graphical user interfaces KW - Image processing KW - oscillating bubble technique KW - signal processing KW - STABILITY KW - surface rheology Y1 - 2016 U6 - https://doi.org/10.1088/0957-0233/27/6/065301 VL - 27 IS - 6 PB - IOP PUBLISHING ER - TY - JOUR A1 - Burdin, Dmitrii A. A1 - Chashin, Dmitri V. A1 - Ekonomov, Nikolai A. A1 - Fetisov, Leonid Y. A1 - Fetisov, Yuri K. A1 - Shamonin (Chamonine), Mikhail T1 - DC magnetic field sensing based on the nonlinear magnetoelectric effect in magnetic heterostructures JF - Journal of physics D: Applied physics N2 - Recently, highly sensitive magnetic field sensors using the magnetoelectric effect in composite ferromagnetic-piezoelectric layered structures have been demonstrated. However, most of the proposed concepts are not useful for measuring dc magnetic fields, because the conductivity of piezoelectric layers results in a strong decline of the sensor's sensitivity at low frequencies. In this paper, a novel functional principle of magnetoelectric sensors for dc magnetic field measurements is described. The sensor employs the nonlinear effect of voltage harmonic generation in a composite magnetoelectric structure under the simultaneous influence of a strong imposed ac magnetic field and a weak dc magnetic field to be measured. This physical effect arises due to the nonlinear dependence of the magnetostriction in the ferromagnetic layer on the magnetic field. A sensor prototype comprising of a piezoelectric fibre transducer sandwiched between two layers of the amorphous ferromagnetic Metglas (R) alloy was fabricated. The specifications regarding the magnetic field range, frequency characteristics, and noise level were studied experimentally. The prototype showed the responsivity of 2.5 V mT(-1) and permitted the measurement of dc magnetic fields in the range of similar to 10 nT to about 0.4 mT. Although sensor operation is based on the nonlinear effect, the sensor response can be made linear with respect to the measured magnetic field in a broad dynamic range extending over 5 orders of magnitude. The underlying physics is explained through a simplified theory for the proposed sensor. The functionality, differences and advantages of the magnetoelectric sensor compare well with fluxgate magnetometers. The ways to enhance the sensor performance are considered. KW - composite KW - magnetic field sensors KW - magnetic heterostructures KW - magnetoelectric effect KW - nonlinear magnetostriction KW - Sensors KW - voltage harmonic generation Y1 - 2016 U6 - https://doi.org/10.1088/0022-3727/49/37/375002 VL - 49 IS - 37 PB - IOP Publishing ER - TY - JOUR A1 - Kalita, Viktor M. A1 - Snarskii, Andrei A. A1 - Shamonin (Chamonine), Mikhail A1 - Zorinets, Denis T1 - Effect of single-particle magnetostriction on the shear modulus of compliant magnetoactive elastomers JF - Physical review E N2 - The influence of an external magnetic field on the static shear strain and the effective shear modulus of a magnetoactive elastomer (MAE) is studied theoretically in the framework of a recently introduced approach to the single-particle magnetostriction mechanism [V. M. Kalita et al., Phys. Rev. E 93, 062503 (2016)]. The planar problem of magnetostriction in an MAE with magnetically soft inclusions in the form of a thin disk (platelet) having the magnetic anisotropy in the plane of this disk is solved analytically. An external magnetic field acts with torques on magnetic filler particles, creates mechanical stresses in the vicinity of inclusions, induces shear strain, and increases the effective shear modulus of these composite materials. It is shown that the largest effect of the magnetic field on the effective shear modulus should be expected in MAEs with soft elastomer matrices, where the shear modulus of the matrix is less than the magnetic anisotropy constant of inclusions. It is derived that the effective shear modulus is nonlinearly dependent on the external magnetic field and approaches the saturation value in magnetic fields exceeding the field of particle anisotropy. It is shown that model calculations of the effective shear modulus correspond to a phenomenological definition of effective elastic moduli and magnetoelastic coupling constants. The obtained theoretical results compare well with known experimental data. Determination of effective elastic coefficients in MAEs and their dependence on magnetic field is discussed. The concentration dependence of the effective shear modulus at higher filler concentrations has been estimated using the method of Pade approximants, which predicts that both the absolute and relative changes of the magnetic-field-dependent effective shear modulus will significantly increase with the growing concentration of filler particles. KW - BEHAVIOR KW - composites KW - DEPENDENCE KW - FERROGELS KW - MECHANICAL-PROPERTIES KW - MICROSTRUCTURE KW - Polymer KW - PURE SHEAR KW - RHEOLOGY KW - SENSITIVE ELASTOMERS Y1 - 2017 U6 - https://doi.org/10.1103/PhysRevE.95.032503 VL - 95 IS - 3 PB - American Physical Society ER -