TY - JOUR A1 - Beimler, Josef A1 - Leißl, Caroline A1 - Ebner, Lena A1 - Elsner, Michael A1 - Mühlbauer, Gerhard A1 - Kohlert, Dieter A1 - Schubert, Martin J. W. A1 - Weiß, Andreas P. A1 - Sterner, Michael A1 - Raith, Thomas A1 - Afranseder, Martin A1 - Krapf, Tobias A1 - Mottok, Jürgen A1 - Siemers, Christian A1 - Großmann, Benjamin A1 - Höcherl, Johannes A1 - Schlegl, Thomas A1 - Schneider, Ralph A1 - Milaev, Johannes A1 - Rampelt, Christina A1 - Roduner, Christian A1 - Glowa, Christoph A1 - Bachl, Christoph A1 - Schliekmann, Claus A1 - Gnan, Alfons A1 - Grill, Martin A1 - Ruhland, Karl A1 - Piehler, Thomas A1 - Friers, Daniel A1 - Wels, Harald A1 - Pflug, Kenny A1 - Kucera, Markus A1 - Waas, Thomas A1 - Schlachetzki, Felix A1 - Boy, Sandra A1 - Pemmerl, Josef A1 - Leis, Alexander A1 - Welsch, Andreas F.X. A1 - Graf, Franz A1 - Zenger, Gerhard A1 - Volbert, Klaus A1 - Waas, Thomas A1 - Scherzinger, Stefanie A1 - Klettke, Meike A1 - Störl, Uta A1 - Heyl, C. A1 - Boldenko, A. A1 - Monkman, Gareth J. A1 - Kujat, Richard A1 - Briem, Ulrich A1 - Hierl, Stefan A1 - Talbot, Sebastian A1 - Schmailzl, Anton A1 - Ławrowski, Robert Damian A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Dams, Florian A1 - Schreiner, Rupert A1 - Valentino, Piergiorgio A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Furgiuele, Franco A1 - Gebbeken, Norbert A1 - Eisenried, Michael A1 - Jungbauer, Bastian A1 - Hutterer, Albert A1 - Bauhuber, Michael A1 - Mikrievskij, Andreas A1 - Argauer, Monika A1 - Hummel, Helmut A1 - Lechner, Alfred A1 - Liebetruth, Thomas A1 - Schumm, Michael A1 - Joseph, Saskia A1 - Reschke, Michael A1 - Soska, Alexander A1 - Schroll-Decker, Irmgard A1 - Putzer, Michael A1 - Rasmussen, John A1 - Dendorfer, Sebastian A1 - Weber, Tim A1 - Al-Munajjed, Amir Andreas A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias A1 - Haug, Sonja A1 - Rudolph, Clarissa A1 - Zeitler, Annika A1 - Schaubeck, Simon A1 - Steffens, Oliver A1 - Rechenauer, Christian A1 - Schulz-Brize, Thekla A1 - Fleischmann, Florian A1 - Kusterle, Wolfgang A1 - Beer, Anne A1 - Wagner, Bernd A1 - Neidhart, Thomas ED - Baier, Wolfgang T1 - Forschungsbericht 2013 T3 - Forschungsberichte der OTH Regensburg - 2013 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7990 CY - Regensburg ER - TY - RPRT A1 - Gerhards, Christoph A1 - Weber, Urban A1 - Klafka, Peter A1 - Golla, Stefan A1 - Hagedorn, Gregor A1 - Baumann, Franz A1 - Brendel, Heiko A1 - Breyer, Christian A1 - Clausen, Jens A1 - Creutzig, Felix A1 - Daub, Claus-Heinrich A1 - Helgenberger, Sebastian A1 - Hentschel, Karl-Martin A1 - von Hirschhausen, Christian A1 - Jordan, Ulrike A1 - Kemfert, Claudia A1 - Krause, Harald A1 - Linow, Sven A1 - Oei, Pao-Yu A1 - Pehnt, Martin A1 - Pfennig, Andreas A1 - Präger, Fabian A1 - Quaschning, Volker A1 - Schneider, Jens A1 - Spindler, Uli A1 - Stelzer, Volker A1 - Sterner, Michael A1 - Wagener-Lohse, Georg A1 - Weinsziehr, Theresa T1 - Klimaverträgliche Energieversorgung für Deutschland – 16 Orientierungspunkte T2 - Diskussionsbeiträge der Scinetists for Future ; 7 N2 - Als fairer Beitrag Deutschlands zur Einhaltung der globalen 1,5-Grad-Grenze werden 16 Orientierungspunkte für eine klimaverträgliche Energieversorgung vorgestellt. Es wird davon ausgegangen, dass hierfür die deutschen energiebedingten CO2-Emissio­nen in etwa 15 Jahren weitgehend auf Null sinken müssen. Energieeinsparung hilft, den notwendigen Ausbau von regenerativen Erzeugungskapazitäten zu verringern. Der Verkehrssektor kann ebenso wie die Bereiche Prozess- und Gebäudewärme hier­zu wesentlich beitragen. Die Kernenergie ist mit großen Risiken belastet und kann nicht hinreichend schnell aufgebaut werden. Biomasse in Form von Energie­pflan­zen zu nutzen, ist ineffizient und steht im Konflikt mit anderen Arten der Land­nut­zung. Importe klimaneutral erzeugter Energieträger in sehr großem Umfang er­for­dern extrem große Investitionen im Ausland. Sie sind eine ungesicherte Option auf die Zukunft. Entscheidend ist daher der ausreichend schnelle Ausbau von Photovoltaik (PV) und Wind­kraft in Deutschland. Schätzungsweise kann der Elektrizitätsbedarf im Jahr 2030 z.B. durch den Ausbau auf ca. 350 GW PV und ca. 150 GW Windkraft nahe­zu voll­ständig regenerativ gedeckt werden. Damit ließe sich eine zum großen Teil elek­tri­fizierte Mobilität und Wärmeversorgung betreiben und ein Teil des benö­tig­ten "grü­nen" Wasserstoffs in Deutschland bereitstellen. Hierfür ist ein jähr­licher Zu­bau von durchschnittlich ca. 30 GW PV und ca. 9 GW Windkraft nötig. Dies ist ca. sechs- (PV) bzw. dreimal (Wind) so hoch wie bisher vorgesehen und verlangt eine ge­sell­schaft­liche Kraftanstrengung. Ein weiter verzögerter Ausbau müsste mit noch deut­lich größeren gesellschaftlichen Anstrengungen für drastische Energieeinspa­run­gen oder Importe erneuerbarer Energie ausgeglichen werden. Insgesamt könnte dies noch deutlich schwieriger zu realisieren sein, als ein ambitionierter Ausbau. Da der Auf­bau der Kapazitäten mehrere Jahre erfordert, ist es möglich nachzusteuern, z. B. wenn erkennbar wird, dass sich ein ausreichend großer globaler Markt für Importe ent­wi­ckelt. Bis dahin ist es aus Verantwortung gegen­über der Zukunft und im Sinne des Pariser Vertrages empfehlenswert, die hier genannten Ausbauziele zu verfol­gen. Grüner, also aus erneuerbaren Energien hergestellter Wasserstoff und daraus abge­lei­tete Syntheseprodukte sind für die Dekarbonisierung von Industrieprozessen, den Flug- und Schiffsverkehr sowie für die Absicherung der Energieversorgung bei Dun­kel­flauten nötig. Ohne die genannten Ausbauziele für Wind und Solar noch drastisch weiter zu erhöhen, stehen diese Produkte für Straßenverkehr und Wärmeversor­gung jedoch nicht in ausreichenden Mengen zur Verfügung. Techniken zum Aus­gleich zwischen Elektrizitätsangebot und -nachfrage sind verfügbar und sollten recht­zeitig auf- bzw. ausgebaut werden. Hierzu gehören: Stromaustausch mit den Nach­barländern, Flexibilisierung des Verbrauchs und Energiespeicherung. Für deren Inte­gration sowie den Ausbau der Netze sollten zügig verbesserte rechtliche Rah­men­bedingungen geschaffen werden. Die Kosten eines klimaverträglichen Energiesystems sind mittel- bis langfristig nicht hö­her als im derzeitigen System. Gleichzeitig entstehen Arbeitsplätze und Export­chan­cen durch Aufbau, Betrieb und Wartung einer regenerativen Energieversorgung in Deutschland und die energetische Gebäudesanierung. Die politischen Rahmenbe­din­gungen entscheiden, ob eine klimaverträgliche Energieversorgung Deutschlands ge­lingt. T2 - Climate-friendly energy supply for Germany - 16 points of orientation KW - Climate KW - Energy System KW - Renewable Energies Y1 - 2021 U6 - https://doi.org/10.5281/zenodo.4409334 ER - TY - CHAP A1 - Mottok, Jürgen A1 - Krämer, Stefan A1 - Deubzer, Michael A1 - Hobelsberger, Martin A1 - Martin, Felix T1 - Hardware Based Tracing of Embedded Multi-Core Systems T2 - 4th Applied Research Conference, 5th July 2014, Ingolstadt Y1 - 2014 SN - 978-3-8440-2875-1 ER - TY - JOUR A1 - Schecklmann, Martin A1 - Schmausser, Maximilian A1 - Klinger, Felix A1 - Kreuzer, Peter M. A1 - Krenkel, Lars A1 - Langguth, Berthold T1 - Resting motor threshold and magnetic field output of the figure-of-8 and the double-cone coil JF - scientific reports N2 - The use of the double-cone (DC) coil in transcranial magnetic stimulation (TMS) is promoted with the notion that the DC coil enables stimulation of deeper brain areas in contrast to conventional figure-of-8 (Fo8) coils. However, systematic comparisons of these two coil types with respect to the spatial distribution of the magnetic field output and also to the induced activity in superficial and deeper brain areas are limited. Resting motor thresholds of the left and right first dorsal interosseous (FDI) and tibialis anterior (TA) were determined with the DC and the Fo8 coil in 17 healthy subjects. Coils were orientated over the corresponding motor area in an angle of 45 degrees for the hand area with the handle pointing in posterior direction and in medio-lateral direction for the leg area. Physical measurements were done with an automatic gantry table using a Gaussmeter. Resting motor threshold was higher for the leg area in contrast to the hand area and for the Fo8 in contrast to the DC coil. Muscle by coil interaction was also significant providing higher differences between leg and hand area for the Fo8 (about 27%) in contrast to the DC coil (about 15%). Magnetic field strength was higher for the DC coil in contrast to the Fo8 coil. The DC coil produces a higher magnetic field with higher depth of penetration than the figure of eight coil. KW - ANTERIOR CINGULATE CORTEX KW - CONNECTIVITY KW - Depression KW - FRONTAL-CORTEX KW - PREDICTOR KW - RTMS KW - STIMULATION KW - TMS Y1 - 2020 U6 - https://doi.org/10.1038/s41598-020-58034-2 VL - 10 IS - 1 PB - Nature ER - TY - JOUR A1 - Thema, Martin A1 - Weidlich, Tobias A1 - Hörl, Manuel A1 - Bellack, Annett A1 - Mörs, Friedemann A1 - Hackl, Florian A1 - Kohlmayer, Matthias A1 - Gleich, Jasmin A1 - Stabenau, Carsten A1 - Trabold, Thomas A1 - Neubert, Michael A1 - Ortloff, Felix A1 - Brotsack, Raimund A1 - Schmack, Doris A1 - Huber, Harald A1 - Hafenbradl, Doris A1 - Karl, Jürgen A1 - Sterner, Michael T1 - Biological CO2-Methanation: An Approach to Standardization JF - Energies N2 - Power-to-Methane as one part of Power-to-Gas has been recognized globally as one of the key elements for the transition towards a sustainable energy system. While plants that produce methane catalytically have been in operation for a long time, biological methanation has just reached industrial pilot scale and near-term commercial application. The growing importance of the biological method is reflected by an increasing number of scientific articles describing novel approaches to improve this technology. However, these studies are difficult to compare because they lack a coherent nomenclature. In this article, we present a comprehensive set of parameters allowing the characterization and comparison of various biological methanation processes. To identify relevant parameters needed for a proper description of this technology, we summarized existing literature and defined system boundaries for Power-to-Methane process steps. On this basis, we derive system parameters providing information on the methanation system, its performance, the biology and cost aspects. As a result, three different standards are provided as a blueprint matrix for use in academia and industry applicable to both, biological and catalytic methanation. Hence, this review attempts to set the standards for a comprehensive description of biological and chemical methanation processes. KW - Biological methanation KW - bubble column reactor KW - CO2-methanation KW - CSTR KW - membrane reactor KW - methanation KW - Power-to-Gas KW - Power-to-Methane KW - standardization KW - Trickle-bed reactor Y1 - 2019 U6 - https://doi.org/10.3390/en12091670 N1 - Corresponding author: Martin Thema VL - 12 IS - 9 SP - 1 EP - 32 PB - MDPI ER - TY - CHAP A1 - Martin, Felix A1 - Sailer, Andreas A1 - Deubzer, Michael A1 - Mottok, Jürgen T1 - Automatische Multicore-Echtzeitvalidierung – Ein Prozess für modellbasierte Softwareentwicklung T2 - Tagungsband 8th Embedded Software Engineering Kongress (ESE), 30.11. - 04.12.2015, Sindelfingen Y1 - 2015 ER - TY - CHAP A1 - Martin, Felix A1 - Sailer, Andreas A1 - Deubzer, Michael A1 - Mottok, Jürgen T1 - Automation of a Closed Loop Model-Based Development Process T2 - Applied Research Conference 2015 (ARC 2015), 3rd July 2015, Nürnberg Y1 - 2015 ER - TY - JOUR A1 - Mauerer, Wolfgang A1 - Rexhepaj, Tanja A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Diermeier, Andreas A1 - Neidhart, Thomas A1 - Wolfrum, Dominik A1 - Sterner, Michael A1 - Heberl, Michael A1 - Nusko, Robert A1 - Maier, Georg A1 - Nagl, Klaus A1 - Reuter, Monika A1 - Hofrichter, Andreas A1 - Lex, Thomas A1 - Lesch, Florian A1 - Kieninger, Bärbel A1 - Szalo, Alexander Eduard A1 - Zehner, Alexander A1 - Palm, Christoph A1 - Joblin, Mitchell A1 - Apel, Sven A1 - Ramsauer, Ralf A1 - Lohmann, Daniel A1 - Westner, Markus A1 - Strasser, Artur A1 - Munndi, Maximilian A1 - Ebner, Lena A1 - Elsner, Michael A1 - Weiß, Nils A1 - Segerer, Matthias A1 - Hackenberg, Rudolf A1 - Steger, Sebastian A1 - Schmailzl, Anton A1 - Dostalek, Michael A1 - Armbruster, Dominik A1 - Koch, Fabian A1 - Hierl, Stefan A1 - Thumann, Philipp A1 - Swidergal, Krzysztof A1 - Wagner, Marcus A1 - Briem, Ulrich A1 - Diermeier, Andreas A1 - Spreitzer, Stefan A1 - Beiderbeck, Sabrina A1 - Hook, Christian A1 - Zobel, Martin A1 - Weber, Tim A1 - Groß, Simon A1 - Penzkofer, Rainer A1 - Dendorfer, Sebastian A1 - Schillitz, Ingo A1 - Bauer, Thomas A1 - Rudolph, Clarissa A1 - Schmidt, Katja A1 - Liebetruth, Thomas A1 - Hamer, Markus A1 - Haug, Sonja A1 - Vernim, Matthias A1 - Weber, Karsten A1 - Saßmannshausen, Sean Patrick A1 - Books, Sebastian A1 - Neuleitner, Nikolaus A1 - Rechenauer, Christian A1 - Steffens, Oliver A1 - Kusterle, Wolfgang A1 - Gömmel, Roland A1 - Wellnitz, Felix A1 - Stierstorfer, Johannes A1 - Stadler, Dominik A1 - Hofmann, Matthias J. A1 - Motschmann, Hubert A1 - Shamonin (Chamonine), Mikhail A1 - Bleicher, Veronika A1 - Fischer, Sebastian A1 - Hackenberg, Rudolf A1 - Horn, Anton A1 - Kawasch, Raphael A1 - Petzenhauser, Michael A1 - Probst, Tobias A1 - Udalzow, Anton A1 - Dams, Florian A1 - Schreiner, Rupert A1 - Langer, Christoph A1 - Prommesberger, Christian A1 - Ławrowski, Robert Damian ED - Baier, Wolfgang T1 - Forschungsbericht 2016 T3 - Forschungsberichte der OTH Regensburg - 2016 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-13840 CY - Regensburg ER - TY - JOUR A1 - Prommesberger, Christian A1 - Bachmann, Michael A1 - Düsberg, Felix A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Hofmann, Martin A1 - Pahlke, Andreas A1 - Schreiner, Rupert T1 - Regulation of the Transmitted Electron Flux in a Field-Emission Electron Source Demonstrated on Si Nanowhisker Cathodes JF - IEEE Transactions on Electron Devices N2 - We report on a method to stabilize the transmitted electron flux in a field-emission electron source using an external regulation circuit. The electron source was realized with an array of silicon (Si) nanowhiskers on the top of elongated pillar structures, a mica spacer, and an extraction grid made of Si. As for most applications, the emitted electron current from the cathode is not as crucial as the transmitted electron flux through the extraction grid toward the anode. We investigated a method which allows the regulation directly by the emitted electron flux and not merely on the cathode current. By using this method, we were able to stabilize the emitted electron flux of our electron source down to values below 1%. Simultaneously, it was shown that there is the possibility to stabilize the influencing value in the real application as well. The effectiveness of this method was demonstrated successfully with an X-ray source setup. The measured X-ray photon count rate was stabilized to a standard deviation of 0.30% at a pressure of 1 × 10 -7 mbar. Even in harsh environment of 2 × 10 -5 mbar, a stabilization of the X-ray photon count rate down to a value of 0.63% was achieved. KW - Cathodes KW - Nanostructured devices KW - Current measurement KW - Photonics KW - Electron sources KW - Emissions KW - Voltage measurement Y1 - 2017 U6 - https://doi.org/10.1109/TED.2017.2763239 SN - 5128-5133 VL - 64 IS - 12 PB - IEEE ER - TY - JOUR A1 - Edler, Simon A1 - Bachmann, Michael A1 - Breuer, Janis A1 - Dams, Florian A1 - Düsberg, Felix A1 - Hofmann, Martin A1 - Jakšič, Jasna A1 - Pahlke, Andreas A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Prommesberger, Christian A1 - Schreiner, Rupert T1 - Influence of adsorbates on the performance of a field emitter array in a high voltage triode setup JF - Journal of Applied Physics N2 - In the present work, black-silicon field emitter arrays (FEAs) are investigated regarding the influence of residual gas pressure on the characteristics and lifetime in the high voltage triode setup. Current-voltage-characteristics at different pressure levels are recorded and show a decreasing emission current with rising pressure. This decrease can be explained by an increase of the work function and charging of the emitter surface caused by adsorbates. The emission current can be restored to its initial value by heating of the FEA up to 110 °C during active emission. With this regeneration procedure, an extended lifetime from about 20 h to 440 h at a residual gas pressure of 10−5 mbar is achieved. Y1 - 2017 U6 - https://doi.org/10.1063/1.4987134 VL - 122 ER -