TY - CHAP A1 - Karamara, Merve A1 - Bogdanski, Moritz-Ole A1 - Zöller, Raphael A1 - Albrecht, Sophie Viktoria A1 - Linner, Thomas A1 - Bock, Thomas A1 - Braml, Thomas T1 - Increasing efficiency and sustainability: A comparative analysis of concrete 3D printing and traditional methods based on case studies T2 - MATEC Web of Conferences N2 - At the forthcoming Concrete Solutions 2025 conference, the subject of concrete 3D printing will be explored in the “Case Studies” category, with a comparison to traditional methods. Concrete 3D printing offers several significant advantages, including the ability to create complex geometries, increased material efficiency, faster build times and cost savings. These are particularly important in the context of the current skilled labour shortage and emphasis on resource efficiency in construction. Nevertheless, challenges persist in the areas of machine reliability, process integration, and material adaptation to meet the requirements of 3D printing. The case studies will present modular and design-engineering-based strategies for the development of efficient, scalable automation solutions that integrate 3D printing into existing processes and allow for project-specific customisation through selective automation. These findings provide a robust framework for industrial applications that enhance efficiency and adaptability. By comparing concrete 3D printing to conventional methods, the insights offer a foundation for advancing automated production in construction, promoting scalable, resource-efficient, and economically sustainable practices that address the industry’s evolving demands. Y1 - 2025 U6 - https://doi.org/10.1051/matecconf/202540913005 N1 - Corresponding author der OTH Regensburg: Merve Karamara VL - 409 PB - EDP Sciences ER - TY - JOUR A1 - Linner, Thomas A1 - Seelinger, Anja A1 - Vogt Lydia, A1 - Schäpers Barbara, A1 - Steinböck, Martina A1 - Krewer, Carmen A1 - Bock, Thomas T1 - REACH: Solutions for Technology-Based Prevention and Empowerment for Older People and their Caregivers JF - Journal of Population Ageing: Special Issue on responsive engagement of older persons promoting activity and customized healthcare N2 - REACH stands for “Responsive Engagement of the Elderly Promoting Activity and Customized Healthcare”. Sustained physical activity matters greatly to the health and well-being of older people and significantly improves their chance of maintaining independent living. It can make a difference across the whole care continuum as well as in almost every setting. Therefore, REACH solutions focus on the systematic, target-oriented increase of physical activity of older people, and tackle the whole prevention spectrum (primary, secondary, and tertiary). It seeks to empower older people and their formal and informal caregivers, and works towards viable solutions for both the formal and in-formal care sector. Technology-based personalization of prevention, activation, and care services provided in various living and care settings is at the center of the developed solutions. Ideally toolkit approach would allow for the tailoring of solutions that create value for end-users, care providers and health care payers alike through the combination, integration and adaptation/re-design elements towards the different contexts of different countries, different payment and reimbursement structures. This Special Issue sheds light on such solutions, their conception, their development, and their testing. Y1 - 2020 U6 - https://doi.org/10.1007/s12062-020-09268-5 VL - 13 IS - 1 SP - 131 EP - 137 PB - Springer Nature ER - TY - JOUR A1 - Ng, Ming Shan A1 - Hall, Daniel A1 - Schmailzl, Marc A1 - Linner, Thomas A1 - Bock, Thomas T1 - Identifying enabler and relational ontology networks in design for digital fabrication JF - Automation in construction N2 - As use of digital fabrication increases in architecture, engineering and construction, the industry seeks appropriate management and processes to enable the adoption during the design/planning phase. Many enablers have been identified across various studies; however, a comprehensive synthesis defining the enablers of design for digital fabrication does not yet exist. This work conducts a systematic literature review of 59 journal articles published in the past decade and identifies 140 enablers under eight categories: actors, resources, conditions, attributes, processes, artefacts, values and risks. The enablers’ frequency network is illustrated using an adjacency matrix. Through the lens of actor-network theory, the work creates a relational ontology to demonstrate the linkages between different enablers. Three examples are presented using onion diagrams: circular construction focus, business model focus and digital twin in industrialisation focus. Finally, this work discusses the intersection of relational ontology with process modelling to design future digital fabrication work routines. KW - digital fabrication KW - relational ontology network KW - actor-network theory KW - process modelling Y1 - 2022 U6 - https://doi.org/10.1016/j.autcon.2022.104592 VL - 144 IS - December SP - 1 EP - 20 PB - Elsevier ER - TY - JOUR A1 - Ng, Ming Shan A1 - Hall, Daniel A1 - Schmailzl, Marc A1 - Linner, Thomas A1 - Bock, Thomas T1 - Identifying enablers and relational ontology networks in design for digital fabrication JF - Automation in Construction N2 - As use of digital fabrication increases in architecture, engineering and construction, the industry seeks appropriate management and processes to enable the adoption during the design/planning phase. Many enablers have been identified across various studies; however, a comprehensive synthesis defining the enablers of design for digital fabrication does not yet exist. This work conducts a systematic literature review of 59 journal articles published in the past decade and identifies 140 enablers under eight categories: actors, resources, conditions, attributes, processes, artefacts, values and risks. The enablers' frequency network is illustrated using an adjacency matrix. Through the lens of actor-network theory, the work creates a relational ontology to demonstrate the linkages between different enablers. Three examples are presented using onion diagrams: circular construction focus, business model focus and digital twin in industrialisation focus. Finally, this work discusses the intersection of relational ontology with process modelling to design future digital fabrication work routines. KW - Digital fabrication KW - Enablers KW - Relational ontology network KW - Actor-Network Theory (ANT) KW - Process modelling Y1 - 2022 U6 - https://doi.org/10.1016/j.autcon.2022.104592 SN - 0926-5805 VL - 144 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Iturralde, Kepa A1 - Feucht, Malte A1 - Illner, Daniel A1 - Hu, Rongbo A1 - Pan, Wen A1 - Linner, Thomas A1 - Bock, Thomas A1 - Eskudero, Ibon A1 - Rodriguez, Mariola A1 - Gorrotxategi, Jose A1 - Izard, Jean-Baptizste A1 - Astudillo, Julen A1 - Cavalcanti Santos, João. A1 - Gouttefarde, Marc A1 - Fabritius, Marc A1 - Martin, Christoph A1 - Henninge, Tomas A1 - Normes, Stein M. A1 - Jacobsen, Yngve A1 - Pracucci, Alessandro A1 - Cañada, Jesus A1 - Jimenez-Vicaria, Jose David A1 - Alonso, Rubén A1 - Elia, Lorenzo T1 - Cable-driven parallel robot for curtain wall module installation JF - Automation in Construction N2 - A cable-driven parallel robot (CDPR) was developed for the installation of curtain wall modules (CWM). The research addressed the question of whether the CDPR was capable installing CWMs with sufficient accuracy while being competitive compared to conventional manual methods. In order to develop and test such a system, a conceptual framework that consisted of three sub-systems was defined. The tests, carried out in two close-to-real demonstration buildings, revealed an absolute accuracy of the CWM installation of 4 to 23 mm. The working time for installing a CWM was reduced to 0.51 h. The results also show that the system is competitive for a workspace greater than 96 m2 compared to conventional manual methods. However, improvements such as reducing the hours for setting up the CDPR on the one hand and achieving a faster and more robust MEE on the other hand will be still necessary in the future. KW - Accuracy KW - Cable-robot KW - Facade KW - On-site Y1 - 2022 U6 - https://doi.org/10.1016/j.autcon.2022.104235 VL - 138 IS - June PB - Elsevier ER - TY - CHAP A1 - Bulgakov, Alexey A1 - Bock, Thomas A1 - Otto, Jens A1 - Buzalo, Natalia A1 - Linner, Thomas ED - Tateyama, Kazuyoshi ED - Ishii, Kazuo ED - Inoue, Fumihiro T1 - Requirements for Safe Operation and Facility Maintenance of Construction Robots T2 - Proceedings of the 37th International Symposium on Automation and Robotics in Construction (ISARC 2020): From Demonstration to Practical Use, To New Stage of Construction Robot, October 27-28, 2020, Kitakyushu, Japan N2 - Construction robots are devices of increased danger and, under certain conditions, can become a source of injuries to maintenance personnel, as well as lead to the failure of technological equipment. Most of the accidents are associated with the presence of maintenance personnel in the working area during programming, configuration, training, repair and maintenance of robots. The article describes measures to ensure safety during the maintenance of robots and manipulators. The stages of preparing the construction industry for the use of manipulators, robots and robotic complexes are presented. A system of measures for preparing equipment for use and its maintenance during operation is proposed. KW - Construction Manipulators and Robots KW - Maintenance of Robotic Systems KW - Operation KW - Safety KW - Service Y1 - 2020 SN - 978-952-94-3634-7 U6 - https://doi.org/10.22260/ISARC2020/0053 SP - 369 EP - 376 PB - The International Association for Automation and Robotics in Construction (I.A.A.R.C.) ER - TY - JOUR A1 - Hu, Rongbo A1 - Iturralde, Kepa A1 - Linner, Thomas A1 - Zhao, Charlie A1 - Pan, Wen A1 - Pracucci, Alessandro A1 - Bock, Thomas T1 - A Simple Framework for the Cost–Benefit Analysis of Single-Task Construction Robots Based on a Case Study of a Cable-Driven Facade Installation Robot JF - Buildings, Architecture: Integration of Art and Engineering N2 - Single-task construction robots (STCRs) have become a popular research topic for decades. However, there is still a gap in the ubiquitous application of STCRs for onsite construction due to various reasons, such as cost concerns. Therefore, cost–benefit analysis (CBA) can be used to measure the net economic benefit of the STCRs, compared to traditional construction methods, in order to boost the implementation of STCRs. This paper presents a simple and practical framework for the economic evaluation of STCRs and conducts a case study of a cable-driven facade installation robot to verify the method. The results show that the cable-driven robot for facade installation is worth investing in in the UK, as well as in the majority of G20 countries. Furthermore, other socioenvironmental implications of STCRs and the limitations of the study are also discussed. In conclusion, the proposed method is highly adaptable and reproducible. Therefore, researchers, engineers, investors, and policy makers can easily follow and customize this method to assess the economic advantages of any STCR systems, compared to traditional construction technologies. KW - cable-driven parallel robot KW - construction robot KW - cost–benefit analysis KW - curtain wall modules KW - economic evaluation KW - facade installation Y1 - 2021 U6 - https://doi.org/10.3390/buildings11010008 VL - 11 IS - 1 SP - 1 EP - 8 PB - MDPI CY - Basel ER - TY - CHAP A1 - Ng, Ming Shan A1 - Bock, Thomas A1 - Linner, Thomas T1 - Robotization: Design for Fabrication, Assembly, Disassembly and the Circular Built Environment with Robot-Oriented Design T2 - 22th Symposium on Construction Robotics in Japan - Ongoing commitment to construction robot technology needed for a sustainable society N2 - Robotics has been gradually adopted in the construction sector to improve productivity and efficiency through automation. Recent scholars study design for automation to facilitate robotization in design and planning. Besides, it has the potential to enable circularity to assist in the current resource crisis. This article explores how robotization can foster the circular built environment with design for fabrication, assembly and disassembly in current practice. This article first presents the industry adoption of robotization through design for fabrication, assembly and disassembly (Design for X) and Robot-Oriented Design (ROD) in Japan and abroad. Secondly, based on the concept of ROD, this work investigates how this fosters the circular built environment through industry review and literature review. It is concluded with three takeaways of robotization for the circular built environment with ROD and future directions in research. The work contributes to the body of knowledge in automation in construction, construction management, technology and innovation. Y1 - 2024 UR - https://www.researchgate.net/publication/384440651_Robotization_Design_for_Fabrication_Assembly_Disassembly_and_the_Circular_Built_Environment_with_Robot-Oriented_Design ER - TY - JOUR A1 - Iturralde, Kepa A1 - Linner, Thomas A1 - Bock, Thomas T1 - Matching kit interface for building refurbishment processes with 2D modules JF - Automation in Construction N2 - A need exists for faster installation of prefabricated modules in the refurbishment market. Current solutions for installing and fitting prefabricated modules on existing buildings are time consuming. The objective of this research is to reduce the time currently required for the installation of timber-based 2D modules by using innovative technologies while improving placement accuracy. A novel installation concept was proposed based on a digitally produced matching kit interface that corrects existing building’s irregularities and connector placement deviations. This solution was tested, validated, and compared in several manufacturing contexts. The tests recorded measurable variables such as the manufacturing time and placement accuracy of the modules. The results demonstrate decreases up to 73% in installation time and placement deviations of less than 2 mm. KW - Customization KW - installation KW - prefabrication KW - Refurbishing Y1 - 2020 U6 - https://doi.org/10.1016/j.autcon.2019.103003 VL - 110 IS - February PB - Elsevier ER - TY - RPRT A1 - Ehrari, Humira A1 - Andersen, Henning Boje, A1 - Valk, Carlijn A1 - Lu, Yuan A1 - Visser, Thomas A1 - Larsen, Rasmus Tolstrup A1 - Korfitsen, Christoffer Bruun A1 - Langberg, Henning A1 - Randriambelonoro, Mirana E. A1 - Schäpers, Barbara A1 - Linner, Thomas T1 - User acceptance and motivational strategies BT - Deliverable submitted as part of the EU H2020 research project REACH (Responsive Engagement of the Elderly promoting Activity and Customized Healthcare), Grant Agreement No. 690425 (Report number: REACH2020 Deliverable D30) N2 - This deliverable describes the results and reflections by the partners’ efforts on user acceptance and motivation strategies. The report presents the outcome of an identification and detailing of user acceptance and motivation strategies for the overall system (REACH, Touchpoints & Engine concept) and subsystems (Touchpoints, REACH toolkit elements), providing full consideration and detailing of ethical, privacy, legal and usability/accessibility aspects. The REACH system incorporates two strands of technological elements; on the one hand, sensing and monitoring elements, and, on the other hand, motivational and physical engagement elements. For both types, user acceptance is critical allowing for a user experience that leads to (intrinsic, extrinsic, etc.) motivation to more physical activity. The remainder of this Deliverable is structured as follows. First, we introduce the REACH-specific interplay of the concept “user acceptance” with the linked concepts “behaviour change/motivation” and “personalization” in the context of (early) physical activation of elderly persons, and outline the related work and activities conducted in REACH (overall and per TP). Second, we present an analysis and structuring of acceptability drivers (ethical, privacy/security, legal, and accessibility considerations) per Touchpoint. From this we developed an integrated view that represents REACH specific know-how about how to use these acceptability drivers to integrate advanced ICT-driven technology for early detection and intervention use cases seamlessly into age inclusive communities. Third, we present our findings in the context of the development of acceptability drivers for the use of sensing and monitoring elements. We conclude the deliverable by outlining acceptability related evidence and examples from REACH trials (based on Deliverable D27 findings), and by summarizing the overall findings of this deliverable. Y1 - 2019 U6 - https://doi.org/10.13140/RG.2.2.20619.64800 N1 - REACH2020: Responsive Engagement of the Elderly promoting Activity and Customized Healthcare (Horizon 2020, PHC track) ER - TY - CHAP A1 - Hu, Rongbo A1 - Kabouteh, Amir A1 - Pawlitza, Katja A1 - Güttler, Jörg A1 - Linner, Thomas A1 - Bock, Thomas ED - Al-Hussein, Mohamed T1 - Developing Personalized Intelligent Interior Units to Promote Activity and Customized Healthcare for Aging Society T2 - Proceedings of the 36th International Symposium on Automation and Robotics in Construction (ISARC 2019), 21.05.2019-24.05.2019, Banff, Canada N2 - The world’s population is aging at an unprecedented pace. Aging society is not only a severe crisis in the developed world such as Germany and Japan, but also a rigorous challenge in emerging economies such as China. Many age-related diseases are fostered by the lack of physical, cognitive, and social activities. Increasing the activity level has many benefits for the elderly and can improve their independence. The research project REACH (funded by European Union’s Horizon 2020 Research and Innovation Program under grant agreement No. 690425) aims to develop a service system that will turn clinical and care environments into personalized modular sensing, prevention, and intervention systems that encourage the elderly to become healthy through activities (e.g., physical, cognitive, socializing, personalized food, etc.). As a core research partner, the Chair of Building Realization and Robotics at Technical University of Munich developed a series of Personalized Intelligent Interior Units (PI²Us), which are a special type of smart furniture, that materialize the REACH concepts and functionality seamlessly into the different REACH use case settings. Specifically, the design and functions of the PI²Us, which consist of the PI²U-SilverArc, PI²U-MiniArc, PI²U-Bed, and PI²U-iStander, will be described in detail. In addition, a modular apartment integrating all PI²Us and key technologies in REACH is designed and simulated to create a total interior living and care environment for elderly users. Due to its modularity, parts of the apartment can be easily adapted and rapidly deployed in different REACH use case settings in four European countries, which will then help the REACH consortium execute a series of testing activities. In conclusion, this research project provides a systematic and innovative example for the world to mitigate the impact of aging society. Y1 - 2019 SN - 978-952-69524-0-6 U6 - https://doi.org/10.22260/ISARC2019/0032 SP - 234 EP - 241 PB - The International Association for Automation and Robotics in Construction ER - TY - CHAP A1 - Pan, Wen A1 - Hu, Rongbo A1 - Linner, Thomas A1 - Bock, Thomas T1 - Developing a roadmap for implementing on-site construction automation and robotics in Hong Kong T2 - CIB World Building Congress 2019 "Constructing Smart Cities" ; 17.06.2019-21.06.2019, Hong Kong, China N2 - For a long time, the conventional construction sector in Hong Kong has been perceived as old-fashioned and lagging behind compared to many other industrial sectors. Numerous challenges are facing the construction industry, such as diminishing productivity, unstable quality, increasing demand, as well as population aging and shortage in the local labor market. One possible solution is to identify and deploy the state-of-the-art technologies that could potentially be implemented in the Hong Kong construction industry. Many studies have been documented about the design and development of a specific construction robotic system. However, there is limited literature on how to investigate the implementation and integration of a range of proposed systems in a specific, local context, and to evaluate the process and impact from short-term, mid-term, and long-term perspectives. Based on the ongoing consultancy project commissioned by the Construction Industry Council (CIC) in Hong Kong, this paper demonstrates the method adopted in proposing a systematic approach as well as the development of a comprehensive roadmap for implementing on-site construction automation and robotic technologies in the context of Hong Kong. In general, the proposed roadmap, which is structured based on the reviews of the current situation in Hong Kong's construction industry, will evaluate short-term and mid-term practical strategies and action plans. Furthermore, it will forecast a long-term perspective, aspirations, and potential business strategy. The activity of road-mapping is extended with the objective to mitigate existing risks and barriers, and to plan ahead. Eventually, it will serve as a guideline for the construction industry in Hong Kong and beyond to execute similar types of projects in the future. KW - Consultancy KW - Hong Kong KW - On-site KW - roadmap KW - Construction automation and robotics Y1 - 2019 UR - https://www.researchgate.net/publication/335149370_Developing_a_roadmap_for_implementing_on-site_construction_automation_and_robotics_in_Hong_Kong ER - TY - CHAP A1 - Iturralde, Kepa A1 - Feucht, Malte A1 - Hu, Rongbo A1 - Pan, Wen A1 - Schlandt, Marcel A1 - Linner, Thomas A1 - Bock, Thomas A1 - Izard, Jean-Baptizste A1 - Eskudero, Ibon A1 - Rodriguez, Mariola A1 - Gorrotxategi, Jose A1 - Astudillo, Julen A1 - Cavalcanti Santos, João. A1 - Gouttefarde, Marc A1 - Fabritius, Marc A1 - Martin, Christoph A1 - Henninge, Tomas A1 - Stein, M. Nornes A1 - Normes, Stein M. A1 - Jacobsen, Yngve A1 - Pracucci, Alessandro A1 - Cañada, Jesus A1 - Jimenez-Vicaria, Jose David A1 - Paulotto, Carlo A1 - Alonso, Rubén A1 - Elia, Lorenzo ED - Tateyama, Kazuyoshi ED - Ishii, Kazuo ED - Inoue, Fumihiro T1 - A Cable Driven Parallel Robot with a Modular End Effector for the Installation of Curtain Wall Modules (Best Paper Award) T2 - Proceedings of the 37th International Symposium on Automation and Robotics in Construction (ISARC 2020): From Demonstration to Practical Use, To New Stage of Construction Robot, October 27-28, 2020, Kitakyushu, Japan N2 - The installation of curtain wall modules (CWMs) is a risky activity carried out in the heights and often under unfavorable weather conditions. CWMs are heavy prefabricated walls that are lifted normally with bindings and cranes. High stability is needed while positioning in order not to damage the fragile CWMs. Moreover, this activity requires high precision while positioning brackets, the modules, and for that reason, intensive survey and marking are necessary. In order to avoid such inconveniences, there were experiences to install façade modules in automatic mode using robotic devices. In the research project HEPHAESTUS, a novel system has been developed in order to install CWMs automatically. The system consists of two subsystems: a cable driven parallel robot (CDPR) and a set of robotic tools named as Modular End Effector (MEE). The platform of the CDPR hosts the MEE. This MEE performs the necessary tasks of installing the curtain wall modules. There are two main tasks that the CDPR and MEE need to achieve: first is the fixation of the brackets onto the concrete slab, and second is the picking and placing of the CWMs onto the brackets. The first integration of the aforementioned system was carried out in a controlled environment that resembled a building structure. The results of this first test show that there are minor deviations when positioning the CDPR platform. In future steps, the deviations will be compensated by the tools of the MEE and the installation of the CWM will be carried out with the required accuracy automatically. KW - automation KW - Façade KW - On-site KW - Robotics Y1 - 2020 SN - 978-952-94-3634-7 U6 - https://doi.org/10.22260/ISARC2020/0204 SP - 1472 EP - 1479 PB - The International Association for Automation and Robotics in Construction (I.A.A.R.C.) ER - TY - CHAP A1 - Hu, Rongbo A1 - Linner, Thomas A1 - Wang, Suting A1 - Cheng, Wenting A1 - Liu, Xiaolong A1 - Güttler, Jörg A1 - Zhao, Charlie A1 - Lu, Yuan A1 - Bock, Thomas ED - Feng, Chen ED - Linner, Thomas ED - Brilakis, Ioannis T1 - Towards a Distributed Intelligent Home Based on Smart Furniture for China's Aging Population BT - A survey T2 - Proceedings of the 38th International Symposium on Automation and Robotics in Construction (ISARC): 02.11.2021 - 04.11.2021, Dubai, United Arab Emirates N2 - Population aging is one of the major challenges facing the world. In particular, the advent of China's aging society caused by various factors will be a major threat to its future development. Therefore, serious measures need to be taken to achieve its demographic sustainability. Smart furniture can be considered as a novel subcategory of gerontechnology. One of the main outcomes of the EU-funded REACH project was a variety of smart furniture named Personalized Intelligent Interior Units (PI2Us) which served as the key component of a distributed intelligent home to promote the health and activity level of older adults. This outcome can potentially be a solution to mitigate the consequences caused by population aging. In order to understand the attitudes and opinions of Chinese older adults towards the relevant technologies, the authors conducted an opinion survey using the PI2Us as an example, which sampled more than 380 older adults in 26 out of 34 provincial-level administrative divisions of China. The survey showed that Chinese older adults in general have a highly positive attitude towards smart furniture and smart home technologies. Several other insights also can be revealed from the survey. Based on further analyses, the paper summarized why the elderly-oriented smart furniture and distributed intelligent home has the potential to thrive in China's market soon. Finally, a three-year project action plan for implementing localized solutions in cooperation with a large Chinese furniture manufacturer was presented. KW - Chinese older adults KW - Distributed intelligent home KW - Gerontechnology KW - Population aging KW - Smart furniture KW - Survey Y1 - 2021 SN - 978-952-69524-1-3 U6 - https://doi.org/10.22260/ISARC2021/0008 SP - 41 EP - 48 PB - International Association for Automation and Robotics in Construction (IAARC) ER - TY - CHAP A1 - Linner, Thomas A1 - Hu, Rongbo A1 - Iturralde, Kepa A1 - Bock, Thomas ED - Ghaffar, Seyed Hamidreza ED - Mullett, Paul ED - Pei, Eujin ED - Roberts, John T1 - A Procedure Model for the Development of Construction Robots T2 - Innovation in Construction : a Practical Guide to Transforming the Construction Industry N2 - Due to a constantly growing interest in construction robots, guidance on the design and management for its development process is needed to employ the best practice know-how and accelerate efficient development and marketisation. The development of construction robots usually involves stakeholders from the construction sector, non-construction sectors, and investors. A systematic design management method can help to integrate the needs and aims of different stakeholders and team members during the development process. Therefore, a procedure model for the development of construction robots is proposed as an integrative guidance on how to systematically conceptualise engineer requirements and to design, develop, implement, evaluate, manage, and mature the designs of construction robots. Several recent projects have been used by the authors to test and verify parts of the proposed cyclic method. In addition, the authors explain how the proposed model has been composed of an adapted set of proven principles and methodologies from the systems engineering and management field and highlight the specific concepts for developing and testing the construction robots. The application of the procedure model revealed that the concept and method are feasible and, in principle, can provide a comprehensive and practical guide on the steps forward. A unique characteristic of the proposed procedure model is the core principle which allows the evolvement over time with each cycle of use. In addition, interchangeable elements can be inserted into the procedure model depending on the region, type of robot, and technical readiness level. KW - Affordable robots KW - Construction automation KW - Construction robotics KW - Modular robotics KW - Modular/multitask construction robots KW - Procedure model KW - Systems engineering KW - Technology management Y1 - 2022 SN - 978-3-030-95798-8 U6 - https://doi.org/10.1007/978-3-030-95798-8_14 SP - 321 EP - 352 PB - SpringerNature CY - Berlin ER - TY - CHAP A1 - Iturralde, Kepa A1 - Pan, Wen A1 - Linner, Thomas A1 - Bock, Thomas ED - Gasparri, Eugenia ED - Brambilla, Arianna ED - Lobaccaro, Gabriele ED - Goia, Francesco T1 - Automation and robotic technologies in the construction context: research experiences in prefabricated façade modules T2 - Rethinking building skins : Transformative technologies and research trajectories N2 - In recent years, there has been an increase in robots that perform activities in the built environment. In this chapter, projects were featured as case studies to demonstrate the potential of using automation and robotic technologies to facilitate building façade installation tasks. The Building Energy Renovation Through Timber-Prefabricated Modules (BERTIM) and the Highly automatEd PHysical Achievements and performancES using cable roboTs Unique Systems (HEPHAESTUS) research projects consist of researching, developing and prototyping different automated solutions for the handling of building envelopes in various processes of the installation sequence. The BERTIM research project focuses on building envelope upgrading, automated building façade manufacturing, while the HEPHAESTUS research project is focused on the cable-driven parallel robot for the installation of curtain wall modules. Both projects have proved the potential use of new technologies for the installation of prefabricated envelopes and reduced working time and costs during installation. KW - automation KW - end-effector KW - installation KW - prefabrication KW - robot KW - time-reduction Y1 - 2022 SN - 9780128224779 U6 - https://doi.org/10.1016/B978-0-12-822477-9.00009-7 SP - 475 EP - 493 PB - Elsevier CY - Cambridge, MA ER - TY - RPRT A1 - Andersen, Henning Boje, A1 - Bardram, Jakob E. A1 - Maxhuni, Alban A1 - Larsen, Rasmus Tolstrup A1 - Schäpers Barbara, A1 - Krewer, Carmen A1 - Steinböck, Martina A1 - Sprengel, D. A1 - Linner, Thomas A1 - Schlandt, Marcel A1 - Kabouteh, Amir A1 - Güttler, Jörg A1 - Hu, Rongbo A1 - Lu, Yuan A1 - Bock, Thomas T1 - Detailed set of privacy guidelines and schemata: Summarization of the outcome of the development of necessary data privacy and security schemata to (1) protect sensed data; (2) ascertain computational anonymity; (3) ensure privileged intervention access BT - Deliverable submitted as part of the EU H2020 research project REACH (Responsive Engagement of the Elderly promoting Activity and Customized Healthcare), Grant Agreement No. 690425 N2 - Deliverable D32: Detailed set of privacy guidelines and schemata Responsive Engagement of the Elderly promoting Activity and Customized Healthcare 2 Deliverable D32: Detailed set of privacy guidelines and schemata: Summarization of the outcome of the development of necessary data privacy and security schemata to (1) protect sensed data; (2) ascertain computational anonymity; (3) ensure privileged intervention access (associated with task T.7.5). Abstract: This deliverable report examines the outcomes of the REACH research project with regard to data privacy and data security, associated with Task T7.5. This document gives an overview of our analyses involving ethics and privacy concerns in terms of the individual touchpoints and shows how these findings guided the project towards the determination of the medical purpose and intended use-cornerstones to on the path to market entry. In addition, we provide a brief overview of how the guidelines regarding data protection and encryption influenced the technical design and implementation of project components. Furthermore, we provide an update on the management of legal implications (and the implications resulting from this for system requirements and business strategy) of the use of machine learning and artificial intelligence in the context of REACH solutions, incorporating an external expert opinion. Finally, this deliverable report contains a summary of our approach towards risk gov-ernance and standardization in this regard: our work in REACH on privacy and security schemata, culminated in a CEN Workshop Agreement (guideline) that generalizes REACH outcomes and makes them accessible and usable beyond the REACH consortium . Y1 - 2020 UR - https://www.researchgate.net/publication/341355713_Detailed_set_of_privacy_guidelines_and_schemata_Summarization_of_the_outcome_of_the_development_of_necessary_data_privacy_and_security_schemata_to_1_protect_sensed_data_2_ascertain_computational_anony N1 - REACH2020: Responsive Engagement of the Elderly promoting Activity and Customized Healthcare (Horizon 2020, PHC track) ER - TY - JOUR A1 - Hu, Rongbo A1 - Linner, Thomas A1 - Trummer, Julian A1 - Güttler, Jörg A1 - Kabouteh, Amir A1 - Langosch, Katharina A1 - Bock, Thomas T1 - Developing a Smart Home Solution Based on Personalized Intelligent Interior Units to Promote Activity and Customized Healthcare for Aging Society JF - Journal of Population Ageing: Special Issue on responsive engagement of older persons promoting activity and customized healthcare N2 - The world’s population is aging at an unprecedented pace. Aging society is not only a severe crisis in the developed world, but also a rigorous challenge in emerging economies. Many age-related diseases are fostered by the lack of physical, cognitive, and social activities. Increasing the activity level has many benefits for the elderly and can improve their independence. Based on the analysis of the state-of-the-art and shortcomings of the current smart home solutions, the EU-funded research project REACH aims to develop a service system that will turn clinical and care environments into personalized modular sensing, prevention, and intervention systems that encourage the elderly to become healthy through various activities. To achieve that goal, the research team developed a series of smart furniture (PI2Us) that materialize the research concepts and functionality seamlessly into the various environments. Specifically, the development process and the functionality testing results of the PI2Us are reported in detail. In addition, a simulated smart home solution concept (TRACK) integrating key assistive technologies developed is proposed to create a comprehensive interior living and care environment for elderly users. Due to its modularity and flexibility, the partial or entire solution can be easily adapted and rapidly deployed in different use case settings in Europe, which allows the project consortium to execute different testing activities. In the next phase, the research team will focus on enhancing the usability and performance of the prototypes in order to eventually push them to the market. In conclusion, this research provides an innovative smart home solution for the industry to mitigate the impact of aging society. KW - Assistive technology KW - Personalized intelligent interior units KW - Sensing technology KW - Smart furniture KW - Smart home Y1 - 2020 U6 - https://doi.org/10.1007/s12062-020-09267-6 VL - 13 IS - 1 SP - 257 EP - 280 PB - Springer Nature ER - TY - JOUR A1 - Linner, Thomas A1 - Pan, Wen A1 - Hu, Rongbo A1 - Zhao, Charlie A1 - Iturralde, Kepa A1 - Taghavi, Meysam A1 - Trummer, Julian A1 - Schlandt, Marcel A1 - Bock, Thomas T1 - A technology management system for the development of single-task construction robots JF - Construction Innovation N2 - Purpose: Because of the sharply growing interest worldwide of “hard” physical-mechanical robot systems for the execution of on-site construction tasks [i.e. single-task construction robots (STCRs)], the purpose of this study is to equip development projects with a systematic design-management system model that allows to integrate the different needs and aims of stakeholders. Design/methodology/approach: This paper proposes a STCR-technology management system (STCR-TMS) for the complete development cycle of STCR designs. The STCR-TMS is based on established principles from systems engineering and management and STCR-specific activities developed and tested by the authors as standalone elements in previous research work. Findings: The application of the STCR-TMS revealed the practicability of the method and the underlying concepts to provide practical guidance for the development process. Additional findings indicate that the method is sufficiently generic and flexible for application to different types of robots and indifferent world regions. This research has also shown that key activities need to be addressed to increase the practicability of the STCR-TMS. Originality/value:  A unique characteristic of this method is the evolution with each utilization cycle. In addition, individual elements are interchangeable and can be adapted based on external circumstances. These properties allow the TMS to be applied to other fields in construction robotics. With the progression of the verification and validation of the method, know-how and certain elements can be fed into standardization activities (e.g. establishing a management system standard). KW - Construction robotics KW - Construction technology KW - Robotics KW - Systems analysis and design KW - Systems engineering KW - Technology management Y1 - 2019 U6 - https://doi.org/10.1108/CI-06-2019-0053 VL - 20 IS - 1 SP - 96 EP - 111 PB - Emerald ER - TY - JOUR A1 - Pan, Mi A1 - Linner, Thomas A1 - Pan, Wei A1 - Cheng, Huimin A1 - Bock, Thomas T1 - Structuring the context for construction robot development through integrated scenario approach JF - Automation in Construction N2 - The technological development of construction robots is underway globally. However, current development activities face significant uncertainties, particularly in terms of the definition and management of system requirements, which are primarily based on vague assumptions about the future. Thus, a new tool is required to grasp how construction robots—and their surrounding ecosystems—will be used. This research adopts an unprecedented scenario-based approach to develop and analyze future alternatives for construction robotics in a systematic manner. Hong Kong “toward 2035” is used as an initial test case, and four scenarios of the robot ecosystem, i.e., “Bottleneck,” “Age of Iron Worker,” “Dynamic Co-evolution of Robotization and Modularization,” and “Rise of the Robots,” are developed from evidence-based analysis. Scenarios highlight the crucial role of workers for construction robot utilization. Driving forces, opportunities, and challenges are identified for elaborating strategies under each scenario. The integrated scenario approach and findings lay an important foundation for systems engineering processes in construction robotics to develop a new tool for structuring system context and specifying system requirements. KW - Construction robotics KW - Construction technology KW - Scenario techniques KW - Systems engineering KW - Technology forecasting Y1 - 2020 U6 - https://doi.org/10.1016/j.autcon.2020.103174 VL - 114 IS - June PB - Elsevier ER -