TY - JOUR A1 - Herrmann, Frank A1 - Büttner, Simon T1 - Automatische Qualitätskontrolle mittels Maschinellem Lernen und SAP Leonardo JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - In vielen Unternehmen werden von Menschen durch Ansehen von Produkten Produktionsfehler identifiziert. Die übersehenen Produktionsfehler führen zunehmend häufiger zu teuren Kundenreklamationen. Für die Produktion von Fußbällen wird in dieser Arbeit diese manuelle Qualitätssicherung analysiert. Als Alternative werden die Fußbälle durch einen Roboter fotografiert u nd durch maschinelles Lernen werden Produktionsfehler auf diesen digitalen Fotos identifiziert. Dieser Prüfprozess wird in SAP Leonardo implementiert und damit wird der bereits in einem SAP System implementierte Produktionsprozess (bzw. Unternehmensprozess) erweitert, wodurch ein durchgängig digitalisierter Gesamtprozess implementiert wird. Dadurch werden signifikant bessere Prüfergebnisse erreichtb und die Durchlaufzeit des Prüfprozesses wird substantiell reduziert. KW - Industrie 4.0 KW - SAP Leonardo KW - SAP S/4HANA KW - ERP - System KW - Machine Learning KW - durchgängig digitalisierter Produktionsprozess Y1 - 2019 UR - https://akwi.hswlu.ch/issue/view/376/431 SN - 2296-4592 IS - 10 SP - 46 EP - 53 PB - AKWI ER - TY - CHAP A1 - Herrmann, Frank ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Grundlagen der Optimierung T2 - Produktionsplanung und -steuerung N2 - Seit vielen Jahrzehnten und in den letzten mit zunehmender Intensität werden Probleme als Optimierungsprobleme dargestellt. Beispiele sind die optimale Nutzungsdauer eines Investitionsobjekts, die Produktionsplanung, die Lagerhaltung bei zufälliger Nachfrage, die Beladung von Lastwagen und die Festlegung von deren (Fahr-) Routen. Dies führte vor allem in amerikanische Literatur zur ökonomischen Ausbildung zur Verwendung von Optimierungsmodelle zur Erläuterung von Sachverhalten – als Beispiel möge das Buch Hillier und Hillier (2011) dienen, welches auch viele Fallstudien aus konkreten industriellen Anwendungen enthält. Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-658-25168-0_4 SP - 61 EP - 87 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - CHAP A1 - Trost, Marco A1 - Claus, Thorsten A1 - Herrmann, Frank ED - Antlová, Klara ED - Semerádová, Tereza T1 - Limitation of Temporary Employment in the Master Production Scheduling T2 - Liberec Economic Forum 2021: Proceedings of the 15th International Conference Y1 - 2021 SN - 978-80-7494-578-6 SP - 201 EP - 209 CY - Liberec, Czech Republic ET - 1. Aufl. ER - TY - JOUR A1 - Herrmann, Frank T1 - Human Experience Versus Rule Decision at Krones AG JF - Biomedical Journal of Scientific & Technical Research N2 - Final assembly at Krones AG must make the best possible use of its production space and meeting the specified customer due dates is critical. Via a self developed simulation tool, the present scheduling procedure is compared with the one by priority rule shortest slack. As a consequence slack should have a higher importance in the planning KW - Simulation of Scheduling KW - Tardiness KW - Unused Area Y1 - 2022 UR - https://biomedres.us/pdfs/BJSTR.MS.ID.006691.pdf U6 - https://doi.org/10.26717/BJSTR.2022.42.006691 SN - 2574 -1241 N1 - Corressponding author: Frank Herrmann VL - 42 IS - 1 SP - 33255 EP - 33260 PB - Biomedical Research Network+ ER - TY - CHAP A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Götz, Matthias A1 - Herrmann, Frank A1 - Selmair, Maximilian ED - Franke, Jörg ED - Schuderer, Peter T1 - Analyse von konventionellen Prioritätsregeln zur Reduktion von CO2-Emissionen durch den Einsatz von Photovoltaikanlagen T2 - Simulation in Produktion und Logistik 2021: Erlangen, 15.-17. September 2021 Y1 - 2021 UR - http://www.asim-fachtagung-spl.de/asim2021/papers/Proof_171.pdf SN - 978-3736974791 SP - 75 EP - 84 PB - Cuvillier Verlag CY - Göttingen ER - TY - JOUR A1 - Herrmann, Frank T1 - Die Smart Factory und ihre Risiken JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - In dieser Arbeit werden die Risiken einer Smart Factory untersucht und strukturiert dargestellt, um den Status der Smart Factory zu sondieren. Somit dient die Arbeit als Überblick über die technischen Komponen-ten einer Smart Factory und die damit verbundenen Risiken und nimmt eine ganzheitliche Sichtweise der Smart Factory ein. Die Ergebnisse zeigen, dass der größte Handlungsbedarf im technologischen Bereich liegt. Folglich wurden die Themen Standardisierung, Informationssicherheit, Verfügbarkeit der IT-Infrastruktur, Verfügbarkeit von schnellem Internet und komplexen Systemen priorisiert. Die organisato-rischen und finanziellen Risiken, welche ebenfalls eine wichtige Rolle bei einer Smart Factory Transfor-mation spielen, werden dabei adressiert. KW - Industrie 4.0 KW - Smart Factory KW - Risiken Y1 - 2020 UR - https://akwi.hswlu.ch/article/view/3277 IS - 12 SP - 70 EP - 83 PB - AKWI ER - TY - CHAP A1 - Herrmann, Frank ED - Makul, Natt T1 - Generic Scheduling by an optimization model demonstrated for a partly automated production line T2 - Recent Advances in Science and Technology Research Vol. 7 Y1 - 2020 UR - https://paparesearch.com/generic-scheduling-by-an-optimization-model-demonstrated-for-a-partly-automated-production-line/ SN - 978-93-90431-52-6 SP - 13 EP - 27 PB - Book Publisher International (a part of SCIENCEDOMAIN International) ER - TY - JOUR A1 - Herrmann, Frank A1 - Horkovics-Kovats, Robert A1 - Sultanow, Eldar T1 - Ein paralleler Algorithmus für API Mining von C# Code JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Konformitätsanalyse ist eine Technik der statischen Code-Analyse (SCA) zur Software-Qualitätssicherung. Ihr Kernproblem ist, dass Werkzeuge nicht aus bereits eingetretenen Fehlern automatisiert dazulernen. Zur Lösung wurde in dieser Arbeit das maschinelle Lernen (ML) evaluiert, indem ein wissenschaftlich fundierter und praktisch erprobter Ansatz zur unüberwachten Lerntechnik angewandt und das Ergebnis analysiert wurde. Es wurde festgestellt, dass zur Anwendung auf verschiedene Programmiersprachen nur ein sprachspezifisches API Mining-Tool notwendig ist. Ein derartiges Tool durchsucht in parallelisierter Form Codezeilen und normalisiert sie für maschinelle Lernprozesse. Dieses System wurde für die Programmiersprache C# implementiert, da viele Industrieprojekte in dieser Sprache entwickelt werden. Zur funktionalen Validierung wurde in einer Fallstudie gezeigt, dass Regeln mit einem positiven Effekt auf Software-Qualität gelernt wurden. Konkret wurde der Wartungsaufwand eines Code-Smells in einem Beispielprojekt durch das Auslagern einer gelernten Assoziation in eine gemeinsame Methode um den Faktor 30 reduziert. Die Laufzeit des Algorithmus wurde empirisch in acht open-source Repositorys evaluiert. Durch Parallelisierung kann eine durchschnittliche Laufzeitverbesserung von 45,16% erwartet werden. Allerdings wurden bei der Anwendung auch Grenzen deutlich: Viele Assoziationen sind nutzlos, die Regelbewertung ist von einem subjektiven Faktor abhängig und die Wirtschaftlichkeit des Tools ist deshalb nicht transparent. Dennoch belegt diese Arbeit, dass ein ML-basiertes SCA-Tool als ergänzende Qualitätssicherungsmaßnahme im Software-Engineering möglich ist. KW - Paralleler Algorithmus KW - API Mining KW - C# Code Y1 - 2022 U6 - https://doi.org/10.26034/lu.akwi.2022.3454 SN - 2296-4592 VL - 16 SP - 48 EP - 56 PB - Technische Hochschule Wildau ER - TY - JOUR A1 - Herrmann, Frank T1 - Der Einsatz von ITK zur Abfallreduktion im Lebensmitteleinzelhandel JF - Russian Journal of Applied Sciences N2 - Die Abfallproblematik in Nahrungsketten ist ein weltweit wichtiges Thema, worüber in vielen Medien häufig berichtet wird. Dieser Beitrag diskutiert die Verwendung der Informations- und Kommunikationstechnologien zum Lösen der Abfallproblematik im Lebensmitteleinzelhandel. Zuerst präsentieren wir existierende methodische Lösungsansätze zur Abfallreduktion im Lebensmitteleinzelhandel. Anschließend zeigen wir, dass die Informations- und Kommunikationstechnologien sowohl bei diesen Lösungsansätzen als auch bei vielen anderen methodisch ähnlichen Problemstellungen eine wichtige Rolle spielen. Y1 - 2018 UR - https://libr.msu.by/bitstream/123456789/9843/1/897n.pdf SP - 100 EP - 104 ER - TY - CHAP A1 - Forstner, Robert A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Anwendung eines Energieabnahmekorridors auf der Ebene der Hauptproduktionsprogrammplanung T2 - Russian Journal of Applied Sciences Y1 - 2018 SP - 95 EP - 98 PB - A. A. Kuleshov MSU CY - Mogilev ER - TY - JOUR A1 - Trost, Marco A1 - Herrmann, Frank T1 - Necessity and application advantages of linked master production scheduling and human resources requirements planning JF - Problems of sustainable development of the regions of the Republic of Belarus and neighbouring countries : proceedings of the VII International Scientific-Practical Conference (Internet-conference), Mogilev, 1 May - 1 August 2018. N2 - The following article considers the need to integrate social aspects into the Master Production Scheduling. This is justified by the demand for sustainable business processes and the previously neglected social dimension, which is also reflected in the development of working conditions. The linear optimization model for Master Production Scheduling outlined in connection with aspects of Human Resource Requirements Planning offers an approach to reduce this research gap and underlines the urgency of long-term planning and control of employee burdens. For companies, this results in a Decision Support System through the evaluation of measures to improve working conditions. Y1 - 2019 SP - 108 EP - 113 PB - A. A. Kuleshov Moskauer Staatliche Universität CY - Mogilev ER - TY - JOUR A1 - Herrmann, Frank T1 - Principles of Business Forecasting JF - Interfaces N2 - In Book Reviews, we review an extensive and diverse range of books. They cover theory and applications in operations research, statistics, management science, econometrics, mathematics, computers, and information systems. In addition, we include books in other fields that emphasize technical applications. The editor will be pleased to receive an e-mail from those willing to review a book, with an indication of specific areas of interest. If you are aware of a specific book that you would like to review, or that you think should be reviewed, please contact the editor. KW - BUSINESS forecasting KW - FILDES KW - Keith KW - NONFICTION KW - ORD KW - PRINCIPLES of Business Forecasting (Book) KW - Robert Y1 - 2014 U6 - https://doi.org/10.1287/inte.2014.0734 VL - 44 IS - 2 SP - 244 EP - 245 PB - Institute for Operations Research ER - TY - CHAP A1 - Herrmann, Frank A1 - Savasci, Faruk ED - Franke, Jörg ED - Schuderer, Peter T1 - Simulation der Einplanung der terminkritischen Montage von Abfüllanlagen am Beispiel der Krones AG T2 - Simulation in Produktion und Logistik 2021: Erlangen, 15.-17.September 2021 N2 - Many companies need to make the best possible use of their production areas. For others, meeting predetermined customer due dates is critical. Few companies have to meet both requirements simultaneously. One example is the final assembly at Krones AG. An extensive simulation study identified potential for improvement. In some planning problems, preferring orders due to buffer time proves to be advantageous. In others, avoiding unused space is better. This project is to be continued with the development of a simulation-based planning program. T2 - Simulation of planning of time-critical assembly of bottling maschines based on example of Krones AG Y1 - 2021 UR - http://www.asim-fachtagung-spl.de/asim2021/papers/Proof_139.pdf SN - 978-3736974791 SP - 653 EP - 662 PB - Cuvillier Verlag CY - Göttingen ER - TY - CHAP A1 - Herrmann, Frank ED - Herrmann, Frank ED - Popescu, Manuela ED - Audette, Michel A. T1 - Simulative Comparison of Scheduling at Krones AG with Shortest Slack T2 - SIMUL 2021: the Thirteenth International Conference on Advances in System Simulation, October 3-7, 2021, Barcelona, Spain N2 - Final assembly at Krones AG must make the best possible use of its production space, and meeting the specified customer due dates is critical. Via a self developed simulation tool, the present scheduling procedure is compared with the one by priority rule shortest slack. As a consequence slack should have a higher importance in the planning. Y1 - 2021 UR - https://www.thinkmind.org/download_full.php?instance=SIMUL+2021 SN - 978-1-61208-898-3 SP - 20 EP - 24 PB - IARIA CY - Wilmington, DE, USA ER - TY - JOUR A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Energy-Oriented Production Planning in Industry BT - A Systematic Literature Review and Classification Scheme JF - Sustainability N2 - Scarcity of resources, structural change during the further development of renewable energy sources, and their corresponding costs, such as increasing resource costs or penalties due to dirty production, lead industrial firms to adapt ecological actions. In this regard, research on energy utilization in production planning has received increased attention in the last years, resulting in a large number of research articles so far. With the paper at hand, we review the literature on energy-oriented production planning. The aim of this study is to derive similar core issues and related properties along energy-oriented models within hierarchical production planning. For this, we carry out a systematic literature review and analyze and synthesize 375 research articles. We classify the underlying literature with a novel two-dimensional classification scheme and identify three key topics and five frequently found characteristics, which are presented in detail throughout this article. Based on these results, we state several potentials for further research. KW - BI-OBJECTIVE OPTIMIZATION KW - EFFICIENT MULTIOBJECTIVE OPTIMIZATION KW - ELECTRICITY DEMAND RESPONSE KW - energy KW - FLEXIBLE JOB-SHOP KW - GREEN SCHEDULING OPTIMIZATION KW - HYBRID FLOW-SHOP KW - literature review KW - LOT-SIZING PROBLEM KW - MANUFACTURING SYSTEM KW - MULTIPURPOSE BATCH PLANTS KW - production planning KW - RENEWABLE ENERGY Y1 - 2021 U6 - https://doi.org/10.3390/su132313317 VL - 13 IS - 23 SP - 1 EP - 32 PB - MDPI CY - Basel ER - TY - JOUR A1 - Malovanij, Julian A1 - Herrmann, Frank T1 - Implementierung eines Treibers zur Anbindung von Mikrocontroller-basierten Maschinen über OPC-UA an das Konfigurations- und Inbetriebnahme-Tool von SSI Schäfer JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Das Thema „Implementierung eines Treibers zur Anbindung von Mikrocontroller-basierten Maschinen über OPC-UA an das Konfigurations- und Inbetriebnahme-Tool von SSI Schäfer“ soll zu einem Gerätetreiber für das Konfigurations- und Inbetriebnahme-Tool CPM führen, welcher den Anschluss von neuen Maschinen an ebendieses ermöglicht. Aktuell befinden sich diese noch in Entwicklung, jedoch sollen sie, von den Vorteilen des CPM-Tools profitieren, welches unter anderem den Inbetriebnahmeprozess einfacher und schneller gestalten kann. Ziel ist somit die Anbindung dieser Maschinen durch die Spezifikation einer Schnittstelle und der Implementierung dieser auf Basis der Schnittstellen des CPM-Tools, in welches sich der Gerätetreiber nahtlos einfügen soll. KW - Gerätetreiber KW - Mikrokontroller-basierte Maschinen KW - SPS KW - OPC-UA Y1 - 2024 U6 - https://doi.org/10.26034/lu.akwi.2024.6210 SN - 2296-4592 IS - 20 SP - 54 EP - 66 PB - AKWI ER - TY - CHAP A1 - Herrmann, Frank A1 - Manitz, Michael ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Ein hierarchisches Planungskonzept zur operativen Produktionsplanung und -steuerung T2 - Produktionsplanung und -steuerung N2 - Ausgangspunkt für die operative Produktionsplanung und -steuerung ist eine Infrastruktur aus Produktionsressourcen mit definierten Produktionskapazitäten, auf denen jeweils die Produktion eines oder mehrerer verschiedener Produkte erfolgen kann. Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-662-64291-7_2 SP - 9 EP - 25 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - CHAP A1 - Herrmann, Frank A1 - Lange, Frederick ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Belastungsorientierte Ansätze in der Produktionsplanung T2 - Produktionsplanung und -steuerung N2 - Unter Berücksichtigung aller Steuergrößen, Restriktionen und Bedingungen kann durch einen simultanen Planungsansatz ein optimaler Produktionsplan erstellt werden. Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-662-64291-7_9 SP - 159 EP - 182 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - CHAP A1 - Claus, Thorsten A1 - Herrmann, Frank A1 - Manitz, Michael ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Knappe Kapazitäten und Unsicherheit - Analytische Ansätze und Simulation in der Produktionsplanung und -steuerung T2 - Produktionsplanung und -steuerung Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-662-64291-7_1 SP - 3 EP - 7 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - CHAP A1 - Herrmann, Frank A1 - Englberger, Julian ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Robuste Optimierung zur Produktionsprogrammplanung T2 - Produktionsplanung und -steuerung Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-662-64291-7_4 SP - 39 EP - 61 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - JOUR A1 - Herrmann, Frank T1 - Using Optimization Models for Scheduling in Enterprise Resource Planning Systems JF - Systems N2 - Companies often use specially-designed production systems and change them from time to time. They produce small batches in order to satisfy specific demands with the least tardiness. This imposes high demands on high-performance scheduling algorithms which can be rapidly adapted to changes in the production system. As a solution, this paper proposes a generic approach: solutions were obtained using a widely-used commercially-available tool for solving linear optimization models, which is available in an Enterprise Resource Planning System (in the SAP system for example) or can be connected to it. In a real-world application of a flow shop with special restrictions this approach is successfully used on a standard personal computer. Thus, the main implication is that optimal scheduling with a commercially-available tool, incorporated in an Enterprise Resource Planning System, may be the best approach. KW - scheduling KW - optimization model KW - real world application KW - enterprise resource planning system KW - material requirements planning II KW - priority rules Y1 - 2016 U6 - https://doi.org/10.3390/systems4010015 VL - 4 IS - 1 SP - 1 EP - 15 PB - MDPI CY - Basel ER - TY - CHAP A1 - Trost, Marco A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Established production planning and control and its enhancement with sustainability T2 - Proceedings of the 37th ECMS International Conference on Modeling and Simulation (ECMS 2023): June 20th - June 23rd, 2023, Florence, Italy N2 - Against the background of the energy crisis, shortage of skilled workers, demographic change and other drivers, sustainable development is also becoming increasingly important for industrial companies. In this respect, production planning and control has an enormous influence on relevant objectives. In classical approaches of production planning and control as presented in this paper, economic-oriented objectives are taken into account to a large extent in decision making. This paper demonstrates that besides these classical models, a variety of approaches exist to influence ecological and social targets through production planning. These different models are assigned to sustainability areas and outlined by exemplary literature sources. Further research is needed, for instance, in the joint consideration of sustainability criteria along different planning levels and sustainable dimensions. KW - Sustainability KW - Social KW - Ecological KW - Hierarchical Production Planning Y1 - 2023 SN - 978-3-937436-80-7 U6 - https://doi.org/10.7148/2023-0320 SN - 2522-2422 SP - 320 EP - 327 PB - ECMS ER - TY - JOUR A1 - Trost, Marco A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Social Sustainability in Production Planning: A Systematic Literature Review JF - Sustainability N2 - Sustainable production includes economic, environmental, and social aspects. However, social sustainability has received less attention, especially compared to the economic aspects. Next to technical and organizational measures, social improvements within supply chains can also be achieved through suitable production planning. Within production planning, production programs are determined, and the assignment of available resources (e.g., employees) is specified. Thus, the utilization and workload of employees are defined. This systematic literature review investigates to what extent such employee-related social aspects are reflected in production planning and discusses whether economic aspects dominate them. For this, a Scopus database search was carried out and 76 identified approaches were analyzed and categorized regarding the occurring employee-related social aspects and their implementation. Thus far, the approaches mainly consider single aspects on single planning levels. A consideration of a broad set of aspects along the entire production planning has rarely been studied. In particular, health and safety aspects are considered on the levels of assembly line balancing and job rotation. However, their impact is primarily determined by the specific settings of the decision-maker. To support decision-makers, only a few studies have investigated the effects based on real application scenarios. Further potential might be an extended modeling of social and economic interdependencies and a consideration of employee-related social aspects in medium- to long-term production planning. KW - ASSEMBLY-LINE KW - employee KW - ERGONOMIC RISKS KW - FATIGUE KW - FLOWSHOP SCHEDULING PROBLEM KW - JOB ROTATION SCHEDULES KW - LINE BALANCING PROBLEM KW - literature review KW - MODEL KW - MUSCULOSKELETAL DISORDERS KW - production planning KW - social sustainability KW - SUPPLY CHAIN KW - WORKER ASSIGNMENT Y1 - 2022 U6 - https://doi.org/10.3390/su14138198 VL - 14 IS - 13 SP - 1 EP - 31 PB - MDPI CY - Basel ER - TY - BOOK A1 - Herrmann, Frank T1 - Lineare Optimierung unter Unsicherheit BT - eine Einführung N2 - Modellierungsalternativen werden mathematisch exakt formuliert; Stärken und Schwächen der derzeit eingesetzten Modellierungstechniken werden demonstriert; Leicht nachrechenbare Fallstudien Y1 - 2022 SN - 978-3-658-34580-8 U6 - https://doi.org/10.1007/978-3-658-34581-5 PB - Springer Fachmedien CY - Wiesbaden ER - TY - JOUR A1 - Davendra, Donald A1 - Herrmann, Frank A1 - Bialic-Davendra, Magdalena T1 - Chaotic Flower Pollination Algorithm for scheduling tardiness-constrained flow shop with simultaneously loaded stations JF - Neural computing & applications N2 - This paper introduces a novel chaotic flower pollination algorithm (CFPA) to solve a tardiness-constrained flow-shop scheduling problem with simultaneously loaded stations. This industrial manufacturing problem is modeled from a filter basket production line in Germany and has been generally solved using standard deterministic algorithms. This research develops a metaheuristic approach based on the highly efficient flower pollination algorithm coupled with different chaos maps for stochasticity. The objective function targeted is the tardiness constraint of the due dates. Fifteen different experiments with thirty scenarios are generated to mimic industrial conditions. The results are compared with the genetic algorithm and with the four standard benchmark priority rule-based deterministic algorithms of First In First Out, Raghu and Rajendran, Shortest Processing Time and Slack. From the obtained results and analysis of the relative difference, percentage relative difference and t tests, CFPA was found to be significantly better performing than the deterministic heuristics and the GA algorithm. KW - Flower pollination algorithm KW - Chaos maps KW - Flow shop with tardiness Y1 - 2022 U6 - https://doi.org/10.1007/s00521-022-08044-0 PB - Springer Nature ER - TY - JOUR A1 - Herrmann, Frank A1 - Engl, Fabian A1 - Trubjansky, Philipp T1 - Ein funktionaler Vergleich der SAP Analytics Cloud und Microsoft Power BI zur Verwendung im Bereich People Analytics bei Vitesco Technologies JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Aufgrund leistungsbedingter Einschränkungen durch die aktuelle Business-Intelligence-Software PowerBI vergleicht die People-Analytics-Abteilung von Vitesco Technologies diese mit der Alternativsoftware SAP Analytics Cloud. Dafür wurden zunächst aktuelle Herausforderungen im People-Analytics-Umfeld identifiziert und basierend darauf Vergleichskriterien erarbeitet. Als Vergleichsmodell kommt das Kano-Modell zum Einsatz. Die durchgeführte Evaluation favorisiert aus funktionaler Sicht einen Umstieg auf die SAP Analytics Cloud, identifiziert allerdings eine Reihe an Herausforderungen, die einen sofortigen Wechsel einschränken. Zu diesen gehören sowohl die Verfügbarkeit als auch die Qualität der HR-Daten. KW - Business Intelligence KW - SAP Analytics Cloud KW - SAC KW - Power BI KW - Cloud Computing KW - Kano-Modell KW - Vergleich KW - People Analytics KW - HR Y1 - 2022 U6 - https://doi.org/10.26034/lu.akwi.2022.3337 SN - 2296-4592 IS - 15 SP - 8 EP - 21 PB - Hochschule Luzern ER - TY - JOUR A1 - Herrmann, Frank A1 - Ruf, Elena A1 - Dittert, Oliver T1 - Robotic Process Automation als Enabler der Digitalen Transformation der OSRAM Continental GmbH JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Der vorliegende Artikel befasst sich mit der Automa-tisierung von Unternehmensprozessen mit Hilfe von Robotic Process Automation (RPA). Um die zentrale Frage nach den Potentialen von RPA zu beantworten, wurde gemeinsam mit der OSRAM Continental GmbH eine Fallstudie in der Einkaufsabteilung durchgeführt. In dieser Fallstudie werden die Fähigkeiten von Attended RPA sowie die Unterschiede im Vergleich zu einem bereits im Unternehmen beste-henden Workflow-Automation-Systems untersucht. Die Automatisierung hat gezeigt, dass mittels RPA das Automatisierungspotential eindeutig erweitert werden kann. Jedoch wurden ebenso deutlich, dass die Technologie auf bestimmte Aufgaben begrenzt ist und daher ein hybrider Automatisierungsansatz mit beiden Technologien die vielversprechendste Lösung darstellt. Y1 - 2022 U6 - https://doi.org/10.26034/lu.akwi.2022.3329 SN - 2296-4592 IS - 15 SP - 44 EP - 56 PB - Hochschule Luzern ER - TY - JOUR A1 - Englberger, Julian A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Master production scheduling with scenario-based capacity-load factors in a rolling planning environment JF - Logistics Research, Special Issue “Supply Chain Analytics in the 2020s” N2 - This paper proposes two stochastic programming models for master production scheduling with capacity-load factor scenarios. In contrast to other work on production planning with load-dependent lead times or dynamic capacity loads, we iteratively build a set of realistic capacity-load factor scenarios by simulating the realization of the master production schedules in a rolling horizon environment. Therefore, we integrate the models into a hierarchical production planning and control system that is common in industrial practice and measure the effective capacity-load factors. With these factors, we resolve the master production scheduling problem. Toa evaluate the performance of the proposed models, we compare the stochastic models with the common approach to reduce the nominally available capacity for master production scheduling. In our experiments, the stochastic models significantly reduce the tardiness of production orders caused by capacity bottlenecks. Y1 - 2022 U6 - https://doi.org/10.23773/2022_12 VL - 15 SP - 1 EP - 16 PB - Bundesvereinigung Logistik (BVL) e.V. CY - Bremen ER - TY - CHAP A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Herrmann, Frank ED - Grothe, Oliver ED - Nickel, Stefan ED - Rebennack, Steffen ED - Stein, Oliver T1 - Addressing Energy Consumption and Energy-related Emissions by Single Machine Scheduling T2 - Operations Research Proceedings 2022, Abstracts of the Annual International Conference of the German Operations Research Society (Gor): Karlsruhe, Germany, September 6-9, 2022 Y1 - 2022 ER - TY - CHAP A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Emission reduction through production scheduling by priority rules and energy onsite generation T2 - Proceedings of the 36th ECMS International Conference on Modelling and Simulation (ECMS 2022), May 30th - June 3rd, 2022, Ålesund, Norway N2 - This article describes primary findings of various simulation runs on job shop scheduling dealing with energy consumption and emission pollution. By two combinations of priority rules, production is linked to the generation output of a renewable energy source installed onsite. The resulting schedules show a reduction of energy-related emissions and makespan compared to several conventional priority rules often used in industrial practice. KW - Sustainable Production Planning KW - Energy-related Emissions KW - Job Shop Scheduling KW - Simulation Y1 - 2022 SN - 978-3-937436-77-7 U6 - https://doi.org/10.7148/2022-0114 SN - 2522-2414 SP - 114 EP - 120 PB - ECMS ER - TY - JOUR A1 - Herrmann, Frank A1 - Riedl, Nadine A1 - Janoschek, Stefan T1 - Konzeptionierung und Implementierung einer standardisierten RPA-Schnittstelle für eine Analytics-On-Demand-Self-Service-Lösung zur Bereitstellung von einkaufsbezogenen Daten in der Krones AG JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Hohe Bearbeitungs- und Antwortzeiten von Tickets, die diverse Aufgaben aus dem Bereich Analytics inkludieren, führten Corporate Procurement (CP) Processes and Systems zur Konzeptionierung und Implementierung einer standardisierten RPA-Schnittstelle, um einen Analytics-On-Demand-Self-Service zur Bereitstellung von einkaufsbezogenen Daten zu realisieren. Dafür wurde zunächst ein Anforderungskatalog erarbeitet, der als Basis für die Konzeptionierung und Implementierung aller zur Prüfung der Funktionsfähigkeit der RPA-Schnittstelle erforderlichen Komponenten diente. Als Proof-of-Concept fungieren die Analytics-Use-Cases der Orderbuchabfrage und Abfrage von Einkaufsinfosätzen mit Konditionen. Die durchgeführte Evaluation bescheinigt aus technischer und prozessualer Sicht den Erfolg des Projekts, wobei im Vordergrund die zukünftig nach Einführung des Analytics-On-Demand-Self Service gewonnen zeitlichen Kapazitäten und verringerten Wartezeiten bei den Mitarbeitenden des Einkaufs der Krones AG stehen. KW - Robotic Process Automation KW - Standardisierung KW - Analytics-On-Demand-Self-Service Y1 - 2024 U6 - https://doi.org/10.26034/lu.akwi.2024.5510 SN - 2296-4592 IS - 19 SP - 51 EP - 63 PB - AKWI ER - TY - JOUR A1 - Engl, Fabian A1 - Herrmann, Frank T1 - A Machine Learning based Approach on Employee Attrition Prediction with an Emphasize on predicting Leaving Reasons JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Using Vitesco Technologies as an example, this article examines whether machine learning models are suitable for detecting employee attrition at an early stage, with the aim of uncovering underlying reasons for leaving. Nine different machine learning algorithms were examined: K-nearest-neighbors, Naive Bayes, logistic regression, a support vector machine, a neural network, a random forest, adaptive boosting, and two gradient boosting models. A three-way-holdout validation method was implemented to assess the quality of the results and measure both the f-score and the degree of model generalization. Initially, it was found that tree-based methods are best suited for classifying employees. A multiclass classification approach showed that under certain conditions it is even possible to predict the underlying leaving reasons. KW - Machine Learning KW - Employee Attrition Prediction KW - Fluctuation Prediction KW - Employee Attrition KW - Leaving Reasons KW - AI Y1 - 2023 U6 - https://doi.org/10.26034/lu.akwi.2023.4488 SN - 2296-4592 IS - 18 SP - 30 EP - 40 PB - AKWI ER - TY - JOUR A1 - Herrmann, Frank A1 - Kerschbaum, Andreas T1 - Auswahl und Anwendung einer geeigneten Software zur standardisierten und automatisierten Berichterstellung im Service am Beispiel der Maschinenfabrik Reinhausen GmbH JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Berichterstattung ist ein wichtiger Bestandteil der Aufgaben der MR. Aktuell fehlen zur Erledigung dieser Aufgabe festgelegte Standards, sowie ein Programm, das sich umfangreich für diese Aufgabenstellung eignet. Im Rahmen der vorliegenden Arbeit wird die Prozessstrecke des Prozesses zur Erstellung eines Ölberichts aufgenommen und auf Schwachstellen untersucht. Anschließend erfolgt die Verbesserung der Schwachstellen durch die Einführung einer neuen Software. Dise wird in einem phasenbasierten Prozess,in Anlehnung an das Phasenmodell zur Softwareauswahl nach Gronau, unter Einbezug festgelegter Kriterien sorgfältig ausgewählt. Das Ergebnis dieser Arbeit ist die Verbesserung des betrachteten Prozesses, sowie die Einführung der Software DevExpress und die Erstellung eines ersten Entwurfsberichts welcher als Vorlage für die zukünftigen Berichte dient. KW - Standardisierung KW - Berichtswesen KW - Softwareauswahl Y1 - 2024 U6 - https://doi.org/10.26034/lu.akwi.2024.5946 SN - 2296-4592 IS - 19 SP - 39 EP - 50 PB - AKWI ER - TY - JOUR A1 - Herrmann, Frank A1 - Janker, Sebastian A1 - Laubmeier, Franz T1 - Integration eines Support-Ticketsystems in die Prozesse des Geschäftsbereichs Informatik + Systeme JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Eine effiziente Bearbeitung von Kundenanliegen und organisierte Hilfe zu einem digitalen Produkt sind für ein modernes Unternehmen wie die F.EE GmbH unabdingbar. Ein zentraler Bestandteil für ein Support-Team beim Bereitstellen dieser Dienstleistungen ist ein SupportTicketsystem mit Optionen zur Automatisierung von Arbeitsabläufen. Der Geschäftsbereich Informatik + Systeme des Unternehmens F.EE GmbH verwendet zurzeit ein Ticketsystem, das aufgrund eines endenden Supportzeitraums ersetzt werden muss. Ohne Supportunterstützung dürften unter anderem Sicherheitslücken auftreten. Von den vielen am Markt verfügbaren Systemen wurde das Open-Source-Ticketsystem ausgewählt. Zur effektiven Nutzung musste es signifikant erweitert werden. KW - Ticketsystem KW - Systemintegration Y1 - 2024 U6 - https://doi.org/10.26034/lu.akwi.2024.6211 SN - 2296-4592 IS - 20 SP - 67 EP - 75 PB - AKWI ER - TY - BOOK A1 - Herrmann, Frank T1 - Produktionsplanung BT - Übungsbuch Band 1 N2 - Eine operative Produktionsplanung und -steuerung ist zentral für eine effektive und effiziente Produktion in Unternehmen und daher eine wesentliche Komponente von Enterprise Ressource Planning Systemen zur Regelung von Unternehmensprozessen. Die implementierten Verfahren sind integraler Bestandteil von Veranstaltungen zur Produktion und Logistik, zu Produktionsplanungs- und -steuerungsystemen, zum Supply Chain Management usw. in Bachelor- und Masterstudiengängen an Hochschulen und Universitäten. Die Aufgaben in diesem Übungsbuch ergänzen die in diesen Veranstaltungen und auch in den entsprechenden Standardlehrbüchern erläuterten Verfahren durch sehr detaillierte Lösungen – über die angegebene Literatur dürften diese sich im Selbststudium erarbeiten lassen. Die Wiederholungsfragen vertiefen das Verständnis über den Einsatz dieser Verfahren, insbesondere in der industriellen Praxis. Aufgrund ihres Umfangs und ihres Schwierigkeitsgrads sind die Aufgaben und Fragenals Klausuraufgaben geeignet. Folglich wendet sich das Buch an Studierende (und mit Einschränkungen an Doktoranden) mit ausgeprägtem Interesse an der Lösung von Produktionsplanungsproblemen. Ferner wendet es sich an Wissenschaftler und Experten in Unternehmen, die einen Eindruck von lösbaren Produktionsplanungsproblemen gewinnen wollen. KW - Prognose KW - Lineare Optimierung KW - ILOG KW - Losbildung KW - Produktionssteuerung Y1 - 2023 SN - 978-3-658-40218-1 U6 - https://doi.org/10.1007/978-3-658-40218-1 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Dai, Chenghao A1 - Schön, Maximilian A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Multi-Site Aggregate Production Planning With Resilience Consideration T2 - Proceedings of the 38th ECMS International Conference on Modeling and Simulation (ECMS 2024): June 4th - June 7th, 2024, Cracow, Poland N2 - The recent years have shown a high frequency of disruptions like natural disasters or manmade disruptions, leading, for example, to transport routes or production facilities being unavailable for extended periods. Many manufacturing companies, which nowadays operate in a global production network, are heavily exposed to these disruptions. This results in both significant costs and substantial exceeding of promised deadlines. If it concerns the first company in a supply chain, it causes correspondingly significant delays in promised deadlines for subsequent companies in the supply chain, including a correspondingly significant increase in costs. Both are exemplified in this paper through a case study. This case study demonstrates that through resilience, both implications can be significantly reduced. KW - Production Planning and Control KW - Aggregate Production Planning KW - Linear Programming KW - Multi-Site Production Planning and Control KW - Supply Chain Resilience Y1 - 2024 SN - 978-3-937436-84-5 U6 - https://doi.org/10.7148/2024-0345 SN - 2522-2422 SP - 345 EP - 351 PB - ECMS ER - TY - JOUR A1 - Trost, Marco A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Master Production Scheduling with Consideration of Utilization-Dependent Exhaustion and Capacity Load JF - Sustainability N2 - A large number of researchers have addressed social aspects in hierarchical production planning. This article responds to research gaps identified in our previous literature review. Accordingly, consideration of social aspects and the economic implications of social improvements are required in a longer term planning approach. For this, we integrate work intensity as employee utilization in a general mixed-integer programming model for master production scheduling. Following existing fatigue functions, we represent the relationship between work intensity and exhaustion through an employee-utilization-dependent exhaustion function. We account for the economic implications through exhaustion-dependent capacity load factors. We solve our model with a CPLEX standard solver and analyze a case study based on a realistic production system and numerical data. We demonstrate that the consideration of economic implications is necessary to evaluate social improvements. Otherwise, monetary disadvantages are overestimated, and social improvements are, thus, negatively affected. Moreover, from a certain level of work-intensity reduction, demand peaks are smoothed more by pre-production, which requires more core employees, while temporary employment is reduced. Further potential may arise from considering and quantifying other interdependencies, such as employee exhaustion and employee days off. In addition, the relationship between social working conditions and employee turnover can be integrated. KW - capacity load KW - employee utilization KW - exhaustion KW - linear optimization KW - master productionscheduling KW - ocial aspects Y1 - 2023 U6 - https://doi.org/10.3390/su15086816 VL - 15 PB - MDPI ER - TY - CHAP A1 - Herrmann, Frank ED - Herrmann, Frank T1 - Performance of Storage Strategies in a Highbay Warehouse T2 - SIMUL 2022, the 14th International Conference on Advances in System Simulation: October 16-20, 2022, Lisbon, Portugal N2 - Storage and retrieval times of goods in inventory processes determine the efficiency of highbay warehouses in companies. These times are highly dependent on the performance of rack feeders. Storage strategies have the greatest influence. The paper shows the impact of an efficient control of rack feeders through storage strategies. Storage strategies which are typically used in industrial inventory processes are analysed. For the analysis a simulation system is implemented, so that the real process times are similar to the simulated ones. This results in recommendations for the use of storage strategies in companies. KW - highbay warehouse KW - storage strategies KW - simulation of storages and retrievals of goods KW - Inventory processes Y1 - 2022 UR - https://www.thinkmind.org/index.php?view=article&articleid=simul_2022_1_120_58002 SN - 2308-4537 SP - 69 EP - 73 PB - IARIA ER -