TY - JOUR A1 - Haynack, Alexander A1 - Sekandar, Zadran A1 - Jithender, J. Timothy A1 - Gambarelli, Serena A1 - Kränkel, Thomas A1 - Thiel, Charlotte A1 - Ozbolt, Josko A1 - Gehlen, Christoph T1 - Can a Hend-Held 3D Scanner Capture Temperature-Induced Strain of Mortar Samples? Comparison between Experimental Measurements and Numerical Simulations JF - mathematics N2 - The expected lifespan of cement-based materials, particularly concrete, is at least 50 years. Changes in the pore structure of the material need to be considered due to external influences and associated transport processes. The expansion behaviour of concrete and mortar during freeze–thaw attacks, combined with de-icing salt agents, is crucial for both internal and external damage. It is essential to determine and simulate the expansion behaviour of these materials in the laboratory, as well as detect the slow, long-term expansion in real structures. This study measures the expansion of mortar samples during freeze–thaw loading using a high-resolution hand-held 3D laser scanner. The specimens are prepared with fully or partially saturated pore structures through water storage or drying. During freeze–thaw experiments, the specimens are exposed to pure water or a 3% sodium chloride solution (NaCl). Results show contraction during freezing and subsequent expansion during thawing. Both test solutions exhibit similar expansion behaviour, with differences primarily due to saturation levels. Further investigations are required to explore the changing expansion behaviour caused by increasing microcracking resulting from continuous freeze–thaw cycles. A numerical analysis using a 3D coupled hygro-thermo-mechanical (HTM) model is conducted to examine the freeze–thaw behaviour of the mortar. The model accurately represents the freezing deformation during the freeze–thaw cycle. KW - concrete KW - mortar KW - durability KW - freeze–thaw and de-icing salt resistance KW - strain KW - 3D laser scanning KW - numerical simulation KW - 3D FE numerical model KW - hygro-thermo-mechanical coupling Y1 - 2023 U6 - https://doi.org/10.3390/math11173672 VL - 11 IS - 17 PB - MDPI CY - Basel ER - TY - CHAP A1 - Haynack, Alexander A1 - Schneider, Alexander A1 - Timothy, Jithender J. A1 - Kränkel, Thomas A1 - Gehlen, Christoph A1 - Thiel, Charlotte T1 - Effect of Chloride Concentration on the Freeze-Thaw Resistance of Concrete T2 - International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures, SynerCrete’23 - Volume 2 N2 - Performance test methods intend to provide a fast, accurate and precise determination of a particular building material property and thus determine the associated material performance. In concrete, various performance tests are used to classify existing or to approve new materials, to compare concrete compositions or to determine causes of damage in existing structures. The challenge of such test methods is to accelerate natural (very slow) mechanisms to determine the material performance precisely within a short time. However, the attack on the material must not be unrealistically intensive, but must represent reality, just in fast motion. The performance tests used to demonstrate the freeze-thaw resistance of concrete employ a 3% NaCl solution, with literature data ranging from 1% to 10% showing that low concentrations can result in higher surface scaling. In this paper, mortar and concrete specimens are tested at 0, 1, 3, 6, and 9% NaCl solution following the CDF procedure (DIN CEN/TS 12390-9:2017-05). The results are discussed against the background of the existing literature and show that the damage is critically dependent on the pore system and thus also on the effect of the micro-ice lens pump. With increasing freeze-thaw exposition, the pessimum in the external damage shifts towards a de-icing salt concentration of 6%. Furthermore, a novel test methodology based on 3D-laserscanning is presented to determine scaling accurately by eliminating side effects that are typically present in current standards. KW - Concrete KW - durability KW - freeze-thaw resistance KW - chloride concentration KW - 3D laser scanning Y1 - 2023 U6 - https://doi.org/10.1007/978-3-031-33187-9_83 SP - 911 EP - 921 PB - Springer CY - Cham ER -