TY - JOUR A1 - Scharfenberg, Georg A1 - Mottok, Jürgen A1 - Artmann, Christina A1 - Hobelsberger, Martin A1 - Paric, Ivan A1 - Großmann, Benjamin A1 - Pohlt, Clemens A1 - Wackerbarth, Alena A1 - Pausch, Uli A1 - Heidrich, Christiane A1 - Fadanelli, Martin A1 - Elsner, Michael A1 - Pöcher, Daniel A1 - Pittroff, Lenz A1 - Beer, Stefan A1 - Brückl, Oliver A1 - Haslbeck, Matthias A1 - Sterner, Michael A1 - Thema, Martin A1 - Muggenthaler, Nicole A1 - Lenck, Thorsten A1 - Götz, Philipp A1 - Eckert, Fabian A1 - Deubzer, Michael A1 - Stingl, Armin A1 - Simsek, Erol A1 - Krämer, Stefan A1 - Großmann, Benjamin A1 - Schlegl, Thomas A1 - Niedersteiner, Sascha A1 - Berlehner, Thomas A1 - Joblin, Mitchell A1 - Mauerer, Wolfgang A1 - Apel, Sven A1 - Siegmund, Janet A1 - Riehle, Dirk A1 - Weber, Joachim A1 - Palm, Christoph A1 - Zobel, Martin A1 - Al-Falouji, Ghassan A1 - Prestel, Dietmar A1 - Scharfenberg, Georg A1 - Mandl, Roland A1 - Deinzer, Arnulf A1 - Halang, W. A1 - Margraf-Stiksrud, Jutta A1 - Sick, Bernhard A1 - Deinzer, Renate A1 - Scherzinger, Stefanie A1 - Klettke, Meike A1 - Störl, Uta A1 - Wiech, Katharina A1 - Kubata, Christoph A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. A1 - Dollinger, Markus A1 - Dembianny, Sven A1 - Kölbl, Andreas A1 - Welker, Franz A1 - Meier, Matthias A1 - Thumann, Philipp A1 - Swidergal, Krzysztof A1 - Wagner, Marcus A1 - Haug, Sonja A1 - Vernim, Matthias A1 - Seidenstücker, Barbara A1 - Weber, Karsten A1 - Arsan, Christian A1 - Schone, Reinhold A1 - Münder, Johannes A1 - Schroll-Decker, Irmgard A1 - Dillinger, Andrea Elisabeth A1 - Fuchshofer, Rudolf A1 - Monkman, Gareth J. A1 - Shamonin (Chamonine), Mikhail A1 - Geith, Markus A. A1 - Koch, Fabian A1 - Ühlin, Christian A1 - Schratzenstaller, Thomas A1 - Saßmannshausen, Sean Patrick A1 - Auchter, Eberhard A1 - Kriz, Willy A1 - Springer, Othmar A1 - Thumann, Maria A1 - Kusterle, Wolfgang A1 - Obermeier, Andreas A1 - Udalzow, Anton A1 - Schmailzl, Anton A1 - Hierl, Stefan A1 - Langer, Christoph A1 - Schreiner, Rupert ED - Baier, Wolfgang T1 - Forschungsbericht 2015 T3 - Forschungsberichte der OTH Regensburg - 2015 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-13867 SN - 978-3-00-048589-3 CY - Regensburg ER - TY - CHAP A1 - Boody, F. P. A1 - Bickel, Peter A1 - Kempf, J. A1 - Monkman, Gareth J. A1 - Höpfl, R. A1 - Hora, H. A1 - Laska, L. A1 - Krasa, J. A1 - Pfeifer, M. A1 - Rohlena, K. A1 - Juha, L. A1 - Wolowski, J. A1 - Badziak, J. A1 - Parys, P. A1 - Ryc, L. A1 - Worya, E. A1 - Szydlowski, A. A1 - Torrisi, L. A1 - Gammino S., A1 - Mezzasalma, A. T1 - Flexible laser ion sources for surface modification T2 - Plasma Production by Laser Ablation, PPLA 2003 : Messina and Catania, Italy, 18-19 September 2003 Y1 - 2003 PB - World Scientific Publishing CY - Singapore ER - TY - JOUR A1 - Beimler, Josef A1 - Leißl, Caroline A1 - Ebner, Lena A1 - Elsner, Michael A1 - Mühlbauer, Gerhard A1 - Kohlert, Dieter A1 - Schubert, Martin J. W. A1 - Weiß, Andreas P. A1 - Sterner, Michael A1 - Raith, Thomas A1 - Afranseder, Martin A1 - Krapf, Tobias A1 - Mottok, Jürgen A1 - Siemers, Christian A1 - Großmann, Benjamin A1 - Höcherl, Johannes A1 - Schlegl, Thomas A1 - Schneider, Ralph A1 - Milaev, Johannes A1 - Rampelt, Christina A1 - Roduner, Christian A1 - Glowa, Christoph A1 - Bachl, Christoph A1 - Schliekmann, Claus A1 - Gnan, Alfons A1 - Grill, Martin A1 - Ruhland, Karl A1 - Piehler, Thomas A1 - Friers, Daniel A1 - Wels, Harald A1 - Pflug, Kenny A1 - Kucera, Markus A1 - Waas, Thomas A1 - Schlachetzki, Felix A1 - Boy, Sandra A1 - Pemmerl, Josef A1 - Leis, Alexander A1 - Welsch, Andreas F.X. A1 - Graf, Franz A1 - Zenger, Gerhard A1 - Volbert, Klaus A1 - Waas, Thomas A1 - Scherzinger, Stefanie A1 - Klettke, Meike A1 - Störl, Uta A1 - Heyl, C. A1 - Boldenko, A. A1 - Monkman, Gareth J. A1 - Kujat, Richard A1 - Briem, Ulrich A1 - Hierl, Stefan A1 - Talbot, Sebastian A1 - Schmailzl, Anton A1 - Ławrowski, Robert Damian A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Dams, Florian A1 - Schreiner, Rupert A1 - Valentino, Piergiorgio A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Furgiuele, Franco A1 - Gebbeken, Norbert A1 - Eisenried, Michael A1 - Jungbauer, Bastian A1 - Hutterer, Albert A1 - Bauhuber, Michael A1 - Mikrievskij, Andreas A1 - Argauer, Monika A1 - Hummel, Helmut A1 - Lechner, Alfred A1 - Liebetruth, Thomas A1 - Schumm, Michael A1 - Joseph, Saskia A1 - Reschke, Michael A1 - Soska, Alexander A1 - Schroll-Decker, Irmgard A1 - Putzer, Michael A1 - Rasmussen, John A1 - Dendorfer, Sebastian A1 - Weber, Tim A1 - Al-Munajjed, Amir Andreas A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias A1 - Haug, Sonja A1 - Rudolph, Clarissa A1 - Zeitler, Annika A1 - Schaubeck, Simon A1 - Steffens, Oliver A1 - Rechenauer, Christian A1 - Schulz-Brize, Thekla A1 - Fleischmann, Florian A1 - Kusterle, Wolfgang A1 - Beer, Anne A1 - Wagner, Bernd A1 - Neidhart, Thomas ED - Baier, Wolfgang T1 - Forschungsbericht 2013 T3 - Forschungsberichte der OTH Regensburg - 2013 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7990 CY - Regensburg ER - TY - JOUR A1 - Mauerer, Wolfgang A1 - Rexhepaj, Tanja A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Diermeier, Andreas A1 - Neidhart, Thomas A1 - Wolfrum, Dominik A1 - Sterner, Michael A1 - Heberl, Michael A1 - Nusko, Robert A1 - Maier, Georg A1 - Nagl, Klaus A1 - Reuter, Monika A1 - Hofrichter, Andreas A1 - Lex, Thomas A1 - Lesch, Florian A1 - Kieninger, Bärbel A1 - Szalo, Alexander Eduard A1 - Zehner, Alexander A1 - Palm, Christoph A1 - Joblin, Mitchell A1 - Apel, Sven A1 - Ramsauer, Ralf A1 - Lohmann, Daniel A1 - Westner, Markus A1 - Strasser, Artur A1 - Munndi, Maximilian A1 - Ebner, Lena A1 - Elsner, Michael A1 - Weiß, Nils A1 - Segerer, Matthias A1 - Hackenberg, Rudolf A1 - Steger, Sebastian A1 - Schmailzl, Anton A1 - Dostalek, Michael A1 - Armbruster, Dominik A1 - Koch, Fabian A1 - Hierl, Stefan A1 - Thumann, Philipp A1 - Swidergal, Krzysztof A1 - Wagner, Marcus A1 - Briem, Ulrich A1 - Diermeier, Andreas A1 - Spreitzer, Stefan A1 - Beiderbeck, Sabrina A1 - Hook, Christian A1 - Zobel, Martin A1 - Weber, Tim A1 - Groß, Simon A1 - Penzkofer, Rainer A1 - Dendorfer, Sebastian A1 - Schillitz, Ingo A1 - Bauer, Thomas A1 - Rudolph, Clarissa A1 - Schmidt, Katja A1 - Liebetruth, Thomas A1 - Hamer, Markus A1 - Haug, Sonja A1 - Vernim, Matthias A1 - Weber, Karsten A1 - Saßmannshausen, Sean Patrick A1 - Books, Sebastian A1 - Neuleitner, Nikolaus A1 - Rechenauer, Christian A1 - Steffens, Oliver A1 - Kusterle, Wolfgang A1 - Gömmel, Roland A1 - Wellnitz, Felix A1 - Stierstorfer, Johannes A1 - Stadler, Dominik A1 - Hofmann, Matthias J. A1 - Motschmann, Hubert A1 - Shamonin (Chamonine), Mikhail A1 - Bleicher, Veronika A1 - Fischer, Sebastian A1 - Hackenberg, Rudolf A1 - Horn, Anton A1 - Kawasch, Raphael A1 - Petzenhauser, Michael A1 - Probst, Tobias A1 - Udalzow, Anton A1 - Dams, Florian A1 - Schreiner, Rupert A1 - Langer, Christoph A1 - Prommesberger, Christian A1 - Ławrowski, Robert Damian ED - Baier, Wolfgang T1 - Forschungsbericht 2016 T3 - Forschungsberichte der OTH Regensburg - 2016 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-13840 CY - Regensburg ER - TY - JOUR A1 - Weber, Karsten A1 - Dendorfer, Sebastian A1 - Süß, Franz A1 - Kubowitsch, Simone A1 - Schratzenstaller, Thomas A1 - Haug, Sonja A1 - Mohr, Christa A1 - Kiesl, Hans A1 - Drechsler, Jörg A1 - Westner, Markus A1 - Kobus, Jörn A1 - Schubert, Martin J. W. A1 - Zenger, Stefan A1 - Pietsch, Alexander A1 - Weiß, Josef A1 - Hinterseer, Sebastian A1 - Schieck, Roland A1 - Scherzinger, Stefanie A1 - Klettke, Meike A1 - Ringlstetter, Andreas A1 - Störl, Uta A1 - Bissyandé, Tegawendé F. A1 - Seeburger, Achim A1 - Schindler, Timo A1 - Ramsauer, Ralf A1 - Kiszka, Jan A1 - Kölbl, Andreas A1 - Lohmann, Daniel A1 - Mauerer, Wolfgang A1 - Maier, Johannes A1 - Scorna, Ulrike A1 - Palm, Christoph A1 - Soska, Alexander A1 - Mottok, Jürgen A1 - Ellermeier, Andreas A1 - Vögele, Daniel A1 - Hierl, Stefan A1 - Briem, Ulrich A1 - Buschmann, Knut A1 - Ehrlich, Ingo A1 - Pongratz, Christian A1 - Pielmeier, Benjamin A1 - Tyroller, Quirin A1 - Monkman, Gareth J. A1 - Gut, Franz A1 - Roth, Carina A1 - Hausler, Peter A1 - Bierl, Rudolf A1 - Prommesberger, Christian A1 - Ławrowski, Robert Damian A1 - Langer, Christoph A1 - Schreiner, Rupert A1 - Huang, Yifeng A1 - She, Juncong A1 - Ottl, Andreas A1 - Rieger, Walter A1 - Kraml, Agnes A1 - Poxleitner, Thomas A1 - Hofer, Simon A1 - Heisterkamp, Benjamin A1 - Lerch, Maximilian A1 - Sammer, Nike A1 - Golde, Olivia A1 - Wellnitz, Felix A1 - Schmid, Sandra A1 - Muntschick, Claudia A1 - Kusterle, Wolfgang A1 - Paric, Ivan A1 - Brückl, Oliver A1 - Haslbeck, Matthias A1 - Schmidt, Ottfried A1 - Schwanzer, Peter A1 - Rabl, Hans-Peter A1 - Sterner, Michael A1 - Bauer, Franz A1 - Steinmann, Sven A1 - Eckert, Fabian A1 - Hofrichter, Andreas ED - Baier, Wolfgang T1 - Forschungsbericht 2017 T3 - Forschungsberichte der OTH Regensburg - 2017 KW - Forschung KW - Forschungsbericht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-13835 SN - 978-3-9818209-3-5 CY - Regensburg ER - TY - JOUR A1 - Metsch, P. A1 - Schmidt, Henrik A1 - Sindersberger, Dirk A1 - Kalina, K. A. A1 - Brummund, J. A1 - Auernhammer, Günter A1 - Monkman, Gareth J. A1 - Kästner, Markus T1 - Field-Induced Interactions in Magneto-Active Elastomers BT - A Comparison of Experiments and Simulations JF - Smart Materials and Structures N2 - In this contribution, field-induced interactions of magnetizable particles embedded into a soft elastomer matrix are analyzed with regard to the resulting mechanical deformations. By comparing experiments for two-, three- and four-particle systems with the results of finite element simulations, a fully coupled continuum model for magneto-active elastomers is validated with the help of real data for the first time. The model under consideration permits the investigation of magneto-active elastomers with arbitrary particle distances, shapes and volume fractions as well as magnetic and mechanical properties of the individual constituents. It thus represents a basis for future studies on more complex, realistic systems. Our results show a very good agreement between experiments and numerical simulations—the deformation behavior of all systems is captured by the model qualitatively as well as quantitatively. Within a sensitivity analysis, the influence of the initial particle positions on the systems' response is examined. Furthermore, a comparison of the full three-dimensional model with the often used, simplified two-dimensional approach shows the typical overestimation of resulting interactions in magneto-active elastomers. Y1 - 2020 U6 - https://doi.org/10.1088/1361-665X/ab92dc N1 - Corrigendum: Field-induced interactions in magneto-active elastomers—a comparison of experiments and simulations (2020 Smart Mater. Struct. 29 085026); https://doi.org/10.1088/1361-665X/abb98b VL - 29 IS - 8 SP - 1 EP - 10 PB - IOPscience ER - TY - GEN A1 - Chavez Vega, Jhohan Harvey A1 - Böhm, Valter A1 - Yin, J. A1 - Becker, Tatiana I. A1 - Köhring, Sebastian A1 - Monkman, Gareth J. A1 - Odenbach, Stefan A1 - Zimmermann, Klaus T1 - Field induced plasticity of magneto-sensitive elastomers for gripping technology applications T2 - 6th Colloquium of SPP 1681, Benediktbeuern, 26. - 28.09.2018 : Book of Abstracts Y1 - 2018 SP - 16 EP - 17 ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Prem, Nina T1 - Magnetically enhanced photoconductive high voltage control JF - ISSS Journal of Micro and Smart Systems N2 - The recent surge of interest in electrostatic actuators, particularly for soft robotic applications, has placed increasing demands on high voltage control technology. In this respect, optoelectronic bidirectional switching and analogue regulation of high voltages is becoming increasingly important. One common problem is the leakage current due to dark resistance of the material or device used. Another is the physical size of such elements. However, their ability to provide galvanic separation makes them a very attractive alternative to conventional (wired) semiconductor elements. This paper gives an overview of available methods and devices before introducing a concept based on the combination of photoresistive and magnetoresistive effects in Gallium Arsenide that are potentially applicable to other semiconductor materials. KW - GaAs KW - High voltage actuators KW - Magnetoresistance KW - Opto-sensors KW - Photoconduction KW - Soft robotics Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-30606 N1 - Corresponding author: Gareth J. Monkman VL - 11 SP - 317 EP - 328 PB - Springer Nature ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Striegl, Birgit A1 - Prem, Nina A1 - Sindersberger, Dirk T1 - Electrical Properties of Magnetoactive Boron‐Organo‐Silicon Oxide Polymers JF - Macromolecular Chemistry and Physics N2 - The electrical properties of rheopectic magnetoactive composites comprising boron-organo-silicon oxide dielectric matrices containing carbonyl iron microparticles are presented for the first time. The increase in interfacial magnetocapacitance is seen to greatly exceed that experienced when using conventional elastomeric matrices such as polydimethylsiloxane. In addition to the increase in capacitance, a simultaneous and sharp decrease in the parallel electrical resistance over several orders of magnitude is also observed. The effects are time dependent but repeatable. Potential applications include magnetically controlled frequency dependent devices, magnetic sensor systems, weighting elements for neural networks, etc. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26488 N1 - Corresponding author: Gareth J. Monkman VL - 221 IS - 4 SP - 1 EP - 8 PB - Wiley ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. T1 - Infrared spectral analysis of low concentration magnetoactive polymers JF - Journal of Applied Polymer Science N2 - This work concerns an area of magnetoactive polymer (MAP) research seldom considered. Traditionally only MAP with high concentrations of magnetic filler (typically between 10 and 90 wt%) have been investigated. This article deals with a hitherto neglected aspect of research, namely MAP containing lower magnetic filler concentrations (1 to 3 wt%). This article utilizes a range of spectroscopic analysis methods (Raman and FTIR) and their applicability to MAP characterization at wavelengths ranging from 2.5 to 25 mu m. Particular attention is paid to low carbonyl iron particle (CIP) concentrations in MAP for which the emergence of capillary doublets at a critical 2 wt% concentration is revealed. This results in measurable magnetic field-dependent changes in IR absorption at a wavelength of 4.255 mu m together with a detectable CO2 susceptibility. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48366. KW - ELASTOMERS KW - magnetism and magnetic properties KW - sensors and actuators KW - spectroscopy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-25913 SN - 1097-4628 N1 - Corresponding author: Nina Prem VL - 137 IS - 7 SP - 1 EP - 7 PB - Wiley ER - TY - CHAP A1 - Monkman, Gareth J. A1 - Böse, Holger A1 - Ermert, Helmut A1 - Klein, Dagmar A1 - Freimuth, Herbert A1 - Baumann, Míchael A1 - Egersdörfer, Stefan A1 - Bruhns, Otto T. A1 - Meier, Alexander A1 - Raja, Kashif ED - Nerlich, Michael ED - Schächinger, Ulrich T1 - Technologies for Haptic Systems in Telemedicine T2 - Integration of Health Telematics into Medical Practice N2 - The ability to image the elastic properties of tissue is potentially useful in a variety of applications. The field of elastic imaging has grown in response to the Potential use of such information in medical diagnosis. Real time ultrasound elastography represents a recent development in determining strain and elasticity distributions. Nevertheless, commonly used imaging techniques rely on the interpretation of two dimensional visual data displayed on a video screen. In reality however, physicians often prefer tactile exploration making the simultaneous portrayal of both video and haptic information most desirable. Since the 1970's many alphanumeric to tactile data conversion methods have been investigated, mainly with the ultimate aim of assisting the blind. More recently, interest has been directed toward the display of pictures on haptically explorable surfaces - Tactile imaging. Such a system would allow surgeons to examine hard sectors contained within soft tissue, and thereby assist in operations held remotely. The expansion of ultrasound elastography to 3D formats would mean the ability to haptically explore regions of the body normally inaccessible to human hands. For three-dimensional imaging the acquisition of sequential tomographic slices using Elastography, combined with image segmentation, enables the reconstruction, quantification and visualisation of tumour volumes. In a collaborative project between four research Institutes, the aim is to produce a prototype three dimensional tactile displays comprising electrically switchable micromachined cells, whose mechanical moduli are governed by phase changes experienced by electrorheological and/or magnetorheological fluids. This will be integrated with a sensory ultrasonic elastography in order to present the human fingers with controllable surfaces capable of emulating biological tissue, muscle and bone. Y1 - 2003 U6 - https://doi.org/10.3233/978-1-60750-941-7-83 SP - 83 EP - 93 PB - IOS Press ER - TY - JOUR A1 - Böse, Holger A1 - Baumann, Michael A1 - Monkman, Gareth J. A1 - Egersdörfer, Stefan A1 - Tunayar, A. A1 - Freimuth, Herbert A1 - Ermert, Helmut A1 - Khaled, W. T1 - A new ER fluid based haptic actuator system for virtual reality JF - International journal of modern physics / B Condensed matter physics, statistical physics N2 - The concept and some steps in the development of a new actuator system which enables the haptic perception of mechanically inhomogeneous virtual objects are introduced. The system consists of a two-dimensional planar array of actuator elements containing an electrorheological (ER) fluid. When a user presses his fingers onto the surface of the actuator array, he perceives locally variable resistance forces generated by vertical pistons which slide in the ER fluid through the gaps between electrode pairs. The voltage in each actuator element can be individually controlled by a novel sophisticated switching technology based on optoelectric gallium arsenide elements. The haptic information which is represented at the actuator array can be transferred from a corresponding sensor system based on ultrasonic elastography. The combined sensor-actuator system may serve as a technology platform for various applications in virtual reality, like telemedicine where the information on the consistency of tissue of a real patient is detected by the sensor part and recorded by the actuator part at a remote location. Y1 - 2005 U6 - https://doi.org/10.1142/9789812702197_0129 [Titel anhand dieser DOI in Citavi-Projekt übernehmen] VL - 19 IS - 7-9 SP - 1628 EP - 1634 PB - World Scientific Publ. ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Egersdörfer, Stefan A1 - Meier, Alexander A1 - Böse, Holger A1 - Baumann, Michael A1 - Ermert, Helmut A1 - Kahled, W. A1 - Freimuth, Herbert T1 - Technologies for Haptic Displays in Teleoperation JF - Industrial Robot N2 - Since the 1960s many alphanumeric to tactile data conversion methods have been investigated, mainly with the ultimate aim of assisting the blind. More recently, interest has been directed toward the display of pictures on haptically explorable surfaces – tactile imaging – for a range of medical, remote sensing and entertainment purposes. This paper examines the technologies which have been utilised for haptically explorable tactile displays over the past three decades, focussing on those which appear commercially viable in the immediate future. Y1 - 2003 U6 - https://doi.org/10.1108/01439910310506792 SN - 0143-991x VL - 30 IS - 6 SP - 525 EP - 530 PB - Emerald ER - TY - JOUR A1 - Böse, Holger A1 - Monkman, Gareth J. A1 - Freimuth, Herbert A1 - Tunayar, A. A1 - Khaled, W. A1 - Baumann, Michael A1 - Egersdörfer, Stefan A1 - Ermert, Helmut T1 - A new haptic sensor-actuator system based on electrorheological fluids JF - Actuator 2004 : 9th International Conference on New Actuators & 3rd International Exhibition on Smart Actuators and Drive Systems ; Bremen, Germany, 14 - 16 June 2004 Y1 - 2004 PB - HVG Hanseatische Veranstaltungs-GmbH CY - Bremen ER - TY - CHAP A1 - Böse, Holger A1 - Monkman, Gareth J. A1 - Freimuth, Herbert A1 - Tunayar, A. A1 - Ermert, Helmut A1 - Khaled, W. A1 - Baumann, Michael A1 - Egersdörfer, Stefan T1 - A new ER fluid based haptic actuator system for virtual reality T2 - Proceedings of the Ninth International Conference Electrorheological Fluids and Magnetorheological Suspensions (ERMR 2004) : Beijing, China, 29 August - 3 September 2004 Y1 - 2004 SP - 889 EP - 895 PB - World Scientific CY - Singapore ER - TY - CHAP A1 - Tunayar, A. A1 - Klein, Dagmar A1 - Freimuth, Herbert A1 - Böse, Holger A1 - Baumann, Michael A1 - Monkman, Gareth J. A1 - Egersdörfer, Stefan A1 - Ermert, Helmut A1 - Khaled, W. T1 - A tactile array based on electrorheological fluids T2 - Actuator 2004 : 9th International Conference on New Actuators & 3rd International Exhibition on Smart Actuators and Drive Systems, 14-16 June 2004, Bremen, Germany Y1 - 2004 SP - 601 EP - 604 PB - HVG Hanseatische Veranstaltungs-GmbH CY - Bremen ER - TY - CHAP A1 - Böse, Holger A1 - Ermert, Helmut A1 - Tunayar, A. A1 - Monkman, Gareth J. A1 - Baumann, Michael A1 - Kahled, W. A1 - Reichling, S. A1 - Bruhns, Otto T. A1 - Freimuth, Herbert A1 - Egersdörfer, Stefan T1 - A novel haptic sensor-actuator system for virtual reality T2 - Eurohaptics 2004, Munich, Germany, June 5 - 7, 2004 Proceedings of the 4th International Conference EuroHaptics 2004 ; June 5 - 7, 2004, München, Germany Y1 - 2004 SN - 3-9809614-0-0 PB - Inst. of Automatic Control Engineering CY - München ER - TY - CHAP A1 - Böse, Holger A1 - Ermert, Helmut A1 - Tunayar, A. A1 - Monkman, Gareth J. A1 - Baumann, Michael A1 - Kahled, W. A1 - Reichling, S. A1 - Bruhns, Otto T. A1 - Freimuth, Herbert A1 - Egersdörfer, Stefan T1 - A Novel Haptic Sensor-Actuator System for Applications in Virtual Reality T2 - BMBF-Tagung, Leipzig 19.10 February 2004 Y1 - 2004 ER - TY - CHAP A1 - Böse, Holger A1 - Monkman, Gareth J. A1 - Freimuth, Herbert A1 - Klein, Dagmar A1 - Ermert, Helmut A1 - Baumann, Michael A1 - Egersdörfer, Stefan A1 - Bruhns, Otto T. T1 - ER Fluid Based Haptic System for Virtual Reality T2 - Actuator 2002 : 8th International Conference on New Actuators & 2nd International Exhibition on Smart Actuators and Drive Systems ; Bremen, Germany, 10 - 12 June 2002 Y1 - 2002 SP - 351 EP - 354 ET - CD-ROM ER - TY - CHAP A1 - Khaled, W. A1 - Bruhns, Otto T. A1 - Reichling, S. A1 - Böse, Holger A1 - Baumann, Michael A1 - Monkman, Gareth J. A1 - Egersdörfer, Stefan A1 - Meier, Alexander A1 - Klein, Dagmar A1 - Freimuth, Herbert A1 - Ermert, Helmut T1 - A haptic system for virtual reality applications based on ultrasound elastography and electrorheological fluids T2 - Acoustical Imaging (ACIM) N2 - Mechanical properties of biological tissue represent important diagnostic information and are of histological and pathological relevance. Malignant tumors are significantly stiffer and more immobile than surrounding healthy tissue. Hard calcifications in vessels occur due to arteriosclerosis. The problem is, that such information is usually not available or can only be obtained by manual palpation, which is subjective and limited in sensitivity. It requires intuitive assessment and does not allow quantitative documentation. Unfortunately, none of the established medical imaging equipment such as magnetic resonance imaging (MRI) or X-ray computed tomography (CT) can provide direct measure of tissue elasticity. On the one hand a suitable sensor is required for quantitative measurement of mechanical tissue properties. On the other hand there is also some need for a realistic haptic display of such tissue properties. Suitable actuator arrays with high spatial resolution acting in real time are required. A haptic sensor actuator system is presented in this paper including a sensitive sensor part and an actuator array for different applications. The mechanical consistency of an object is to be locally specified using a sensor system and represented perceptibly in a remote position on an actuator system for the user. The sensor system uses ultrasound (US) elastography, whereas the actuator array is based on electrorheological (ER) fluids. KW - Minimal Invasive Surgery KW - Manual Palpation KW - Tactile Display KW - Virtual Reality Application KW - Ultrasound ELASTOGRAPHY Y1 - 2004 SN - 978-90-481-6652-7 SN - 978-1-4020-2402-3 U6 - https://doi.org/10.1007/978-1-4020-2402-3_85 SN - 0270-5117 SN - 2215-1869 VL - 27 SP - 667 EP - 674 PB - Springer CY - Dordrecht ER - TY - CHAP A1 - Khaled, W. A1 - Bruhns, Otto T. A1 - Reichling, S. A1 - Böse, Holger A1 - Baumann, Michael A1 - Monkman, Gareth J. A1 - Egersdörfer, Stefan A1 - Meier, Alexander A1 - Klein, Dagmar A1 - Freimuth, Herbert A1 - Ermert, Helmut T1 - A haptic sensor-actuator-system based on ultrasound elastography and electrorheological fluids for virtual reality applications in medicine T2 - CARS 2003 : computer assisted radiology and surgery ; proceedings of the 17th International Congress and Exhibition London, June 25 - 28, 2003 N2 - Mechanical properties of biological tissue represent important diagnostic information and are of histological relevance (hard lesions, "nodes" in organs: tumors; calcifications in vessels: arteriosclerosis). The problem is, that such information is usually obtained by digital palpation only, which is limited with respect to sensitivity. It requires intuitive assessment and does not allow quantitative documentation. A suitable sensor is required for quantitative detection of mechanical tissue properties. On the other hand, there is also some need for a realistic mechanical display of those tissue properties. Suitable actuator arrays with high spatial resolution and real-time capabilities are required operating in a haptic sensor actuator system with different applications. The sensor system uses real time ultrasonic elastography whereas the tactile actuator is based on electrorheological fluids. Due to their small size the actuator array elements have to be manufactured by micro-mechanical production methods. In order to supply the actuator elements with individual high voltages a sophisticated switching and control concept have been designed. This haptic system has the potential of inducing real time substantial forces, using a compact lightweight mechanism which can be applied to numerous areas including intraoperative navigation, telemedicine, teaching, space and telecommunication. Y1 - 2003 SP - 1354 PB - Elsevier CY - Amsterdam ER -