TY - JOUR A1 - Wohanka, Christian A1 - Herrmann, Frank T1 - Anbindung von Halbleiter Fertigungsautomaten an die SAP NetWeaver Plattform JF - Industrie-Management KW - Fertigung KW - Automation KW - Halbleiterbauelement KW - SAP NetWeaver Y1 - 2008 IS - 2 SP - 39 EP - 42 PB - Gito Verlag CY - Bremen ER - TY - JOUR A1 - Heindl, Martina A1 - Herrmann, Frank T1 - Verkürzung von Ein- und Auslagerzeiten in Lagerprozessen JF - PPS-Management KW - Lagerhaltung KW - Lagerplanung Y1 - 2007 VL - 12 IS - 4 SP - 47 EP - 50 PB - GITO Verlag CY - Berlin ER - TY - BOOK A1 - Herrmann, Frank T1 - Operative Planung in IT-Systemen für die Produktionsplanung und -steuerung BT - Wirkung, Auswahl und Einstellhinweise von Verfahren und Parametern N2 - Die operative Planung in der Produktionslogistik besteht im Kern aus der Prognose von Bedarfen, dem Management von Lagerbeständen, der Planung des Produktionsprogramms, der Materialbedarfsplanung und der Fertigungssteuerung. Kommerziell verfügbare Enterprise Resource Planning-Systeme oder Produktionsplanungs- und -steuerungssysteme bieten hierfür sehr viele Verfahren mit vielen Einstellungsmöglichkeiten an, die in diesem Buch detailliert erläutert werden. Die ausführlichen Beispiele und Fallstudien erleichtern das Nachvollziehen der Einzelschritte dieser Verfahren. Die Alternativen haben zum Teil signifikante Auswirkungen auf Parameter wie Termineinhaltung, Durchlaufzeit und Kapitalbindung, die das Erreichen der Unternehmensziele maßgeblich beeinflussen. Zur Unterstützung von Anwendern wird die Wirkung dieser Einstellungsmöglichkeiten analysiert und es werden Hinweise bzw. Leitfäden zu ihrer Einstellung gegeben. KW - Enterprise-Resource-Planning KW - Operative Planung KW - PPS Y1 - 2011 SN - 978-3-8348-8172-4 U6 - https://doi.org/10.1007/978-3-8348-8172-4 PB - Vieweg+Teubner ER - TY - CHAP A1 - Vitzthum, Thorsten A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Can Aggregate Production Planning (APP) be modified to be as good as Master Production Scheduling (MPS) T2 - ACC Journal N2 - In diesem Beitrag wird anhand einer Fallstudie die Bedeutung der Hauptproduktionsprogrammplanung (HPPLAN) für die hierarchische Produktionsplanung herausgearbeitet werden. Dazu wird versucht das Ergebnis der aggregierten Gesamtplanung (AGGRPLAN) durch Veränderung einzelner Paramater so zu verbessern, dass es dem Ergebnis der HPPLAN entspricht. Im Rahmen der Untersuchungen konnten dabei Verbesserungen für einzelne Planungssituationen erzielt werden, eine generelle Lösung konnte jedoch nicht gefunden werden. Insbesondere der Einsatz eines geeigneten Kapazitätsreduktionsfaktors in Verbindung mit der Berücksichtigung der Durchlaufzeit führt zu einer Verbesserung der Lösung. Bei der Planung von mehr als einem Produkt ist allerdings schwierig einen geeigneten Kapazitätsreduktionsfaktor zu finden, da dieser abhängig von der Nachfrage ist. KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung KW - Fallstudie KW - Hierarchical production planning KW - Aggregate production planning (APP) KW - Master production scheduling (MPS) KW - Material requirement planning KW - Resource profiles Y1 - 2017 U6 - https://doi.org/10.15240/tul/004/2017-2-012 VL - 23 IS - 2 SP - 155 EP - 162 ER - TY - BOOK A1 - Herrmann, Frank T1 - Logik der Produktionslogistik N2 - Für kosteneffiziente und flexible Produktionsprozesse wurden und werden zunehmend ausgefeilte Verfahren eingesetzt. Sie entstammen dem Operations Research, der, deswegen, nach wie vor eine hohe Produktivität aufweist. Diese Verfahren berufen sich auf grundlegende Resultate der Produktionslogistik, die sich beweisen lassen und daher zeitlos gültig sind. Ihre Kenntnis ist für das Verständnis und die Einsatzmöglichkeiten, insbesondere die Grenzen, dieser Verfahren erforderlich. Es erlaubt auch die grundlegenden Stärken und Schwächen von manchen aktuell diskutierten Ansätzen zu analysieren. Die Konzepte und Verfahren werden im Detail begründet bzw. hergeleitet; dies schließt die Beweise ein, die überwiegend aus dem Internet heruntergeladen werden können. Zum schrittweisen Nachvollziehen der Konzepte und der Einzelschritte der Verfahren dienen die ausführlich erläuterten Beispiele. Das Buch richtet sich an Studierende der Wirtschaftswissenschaften, der Wirtschaftsinformatik und dem Operations Research sowie an Experten und Wissenschaftler, die sich für die Theorie zur Produktionslogistik interessieren. Stärken und Schwächen von aktuell diskutierten Ansätzen aufdecken. KW - Fertigungslogistik Y1 - 2009 SN - 978-3-486-84856-4 PB - Oldenbourg ER - TY - CHAP A1 - Trost, Marco A1 - Teich, Enrico A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Master Production Scheduling and the relevance of included social criteria T2 - ACC Journal N2 - Folgender Beitrag untersucht die Notwendigkeit einer Berücksichtigung von Mitarbeiterauslastungen und davon abhängiger Bearbeitungszeiten in der Hauptproduktionsprogrammplanung. Zudem wird aufgezeigt, dass dieses Themengebiet aktuell eine Forschungslücke darstellt. Aus diesem Grund wird ein selbst entwickeltes lineares Optimierungsmodell für die Hauptproduktionsprogrammplanung vorgestellt, welches soziale Kriterien und eine geeignete Fallstudie enthält. Die Ergebnisse verdeutlichen, dass erhebliche Abweichungen durch eine Ignoranz von Mitarbeiterauslastungen und davon abhängiger Bearbeitungszeiten entstehen. Deshalb ist eine Integration zu empfehlen. Allerdings wird auch deutlich, dass weitere Forschungen notwendig sind, speziell für die Bestimmung geeigneter Erschöpfungsfunktionen, so wie beispielsweise Funktionen für Lerneffekte existieren. KW - Fertigungsprogrammplanung KW - Personaleinsatz KW - Lineare Optimierung KW - Sustainability KW - Production planning and control KW - Master production scheduling KW - Linear optimization KW - Human fatigue Y1 - 2017 U6 - https://doi.org/10.15240/tul/004/2017-2-011 VL - 23 IS - 3 SP - 146 EP - 154 ER - TY - CHAP A1 - Trost, Marco A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Adapted Master Production Scheduling: Potential for Improving Human Working Conditions T2 - Proceedings of the 33th European Conference on Modelling and Simulation 2019 (ECMS), Caserta, Italy N2 - This article illustrates the problem of deficient working conditions like high work intensity and underlines the possibilities of production planning and control to improve them. However, an included literature search presents that previous approaches have predominantly considered social aspects within a short planning horizon and that there is a need for a long-term consideration. To address this research gap a linear optimization model for Master Production Scheduling is presented, which has been extended by basic aspects of personnel requirements planning and a control of personnel work intensity. The results show that improvements in working conditions can be achieved through adapted production planning without an automatically increase in costs. However , challenges in quantifying the corresponding social correlations are identified as well. KW - Produktionsplanung KW - Personalbedarfsplanung KW - Lineare Optimierung KW - Master Production Scheduling KW - Sustainability KW - Work Intensity KW - Workload Y1 - 2019 U6 - https://doi.org/10.7148/2019 VL - 33,1 SP - 310 EP - 316 ER - TY - CHAP A1 - Vitzthum, Thorsten A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Einfluss von Mitarbeiterqualifikationszeiten im Rahmen nachhaltiger Produktionsplanung T2 - Simulation in Produktion und Logistik 2017, Kassel, 20.-22. September N2 - This research paper evaluates the potential of reducing shortages and costs that are created by training measures as an example for measurement of extended qualification of key employees in sustainable production planning. Capacity planning with standard methods in Enterprise Resource Planning Systems, namely priority rules, are used. Almost always, the optimal solution is not found, although there is one. In addition, unnecessarily high stocks are built up. In real business situations, this causes lost profits. T2 - Influence of Employee Qualification Times in the Context of Sustainable Production Planning KW - Enterprise-Resource-Planning KW - Produktionsplanung KW - Betriebliche Fortbildung Y1 - 2017 UR - http://www.asim-fachtagung-spl.de/asim2017/papers/Proof_111_Vitzthum.pdf SP - 315 EP - 324 ER - TY - CHAP A1 - Forstner, Robert A1 - Stauber, Stephan A1 - Herrmann, Frank T1 - Simulationsstudie zur sequentiellen Behälterversorgung in der automatischen Intralogistik T2 - Simulation in Produktion und Logistik 2017, September 20 - 22, 2017, Kassel, Germany N2 - After explaining the necessity of sequential sorting processes within branched conveyor systems and introducing basic sequential controlling principles, this paper analyses with a simulation study different ways of implementing sequential supply processes for small load carriers in an abstracted automated intralogistics system. Simulation results show that a layout with sequencing systems with explicit buffer places can ensure much higher sequential throughput performances than a layout with a loop for sequencing or a layout which implements sequencing processes just with the control of carrier sources. Because of sequential control dependencies in the layout with buffer places, further experiments for sequential supply processes with different layouts forms have to be assessed. KW - Förderanlage KW - Sortieranlage KW - Materialflusssteuerung KW - Transportbehälter KW - Simulation Y1 - 2017 UR - http://www.asim-fachtagung-spl.de/asim2017/papers/Proof_124_Forstner.pdf SP - 489 EP - 498 ER - TY - JOUR A1 - Janssen, Larissa A1 - Diabat, Ali A1 - Sauer, Jürgen A1 - Herrmann, Frank T1 - A stochastic micro-periodic age-based inventory replenishment policy for perishable goods JF - Transportation Research Part E: Logistics and Transportation N2 - In this paper, we propose a micro-periodic inventory replenishment policy for quickly perishable goods with fixed and known lifetime of items, deterministic lead time, fixed given order cycle, mixed issuing policies (FIFO and LIFO), age-based stock, imperfect items and target customer service level under random demand. The inventory policy is based on time of day (morning, midday, afternoon or evening). The results of our simulation study show that the proposed micro-periodic inventory policy leads to waste reduction of 66% as well as a partial decrease in cost compared to inventory policy with planning on a daily basis. KW - Frischware KW - Bestandsmanagement KW - Bestellmengenplanung KW - Stochastisches Modell KW - Inventory KW - Micro-periodic KW - Perishable goods KW - Stochastic demand KW - Waste reduction KW - Simulation study KW - Simulation Y1 - 2018 U6 - https://doi.org/10.1016/j.tre.2018.08.009 VL - 118 IS - October SP - 445 EP - 465 PB - Elsevier ER - TY - JOUR A1 - Trost, Marco A1 - Teich, Enrico A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Ein lineares Optimierungsmodell zur Hauptproduktionsprogrammplanung mit Berücksichtigung sozialer Größen JF - uwf UmweltWirtschaftsForum N2 - Aufgrund weniger existenter sozialorientierter Forschungen im Rahmen der Produktionsplanung und -steuerung stellt dieser Beitrag ein lineares Optimierungsmodell für die Hauptproduktionsprogrammplanung vor, welches soziale Kriterien berücksichtigt. Erste Ergebnisse deuten an, dass geringe Kosten nicht durch eine maximierte Mitarbeiterauslastung entstehen sondern durch geringe Kapazitätsschwankungen. KW - Sustainability KW - Social dimension KW - Production planning and control KW - Master production scheduling KW - Linear optimisation KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung KW - Personaleinsatz KW - Lineare Optimierung Y1 - 2017 U6 - https://doi.org/10.1007/s00550-017-0454-7 VL - 25 SP - 71 EP - 80 ER - TY - BOOK A1 - Claus, Thorsten A1 - Herrmann, Frank A1 - Teich, Enrico T1 - Kostensimulation BT - Grundlagen, Forschungsansätze, Anwendungsbeispiele KW - Kostenanalyse KW - Simulation Y1 - 2019 SN - 978-3-658-25167-3 U6 - https://doi.org/10.1007/978-3-658-25168-0 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Trost, Marco A1 - Claus, Thorsten A1 - Teich, Enrico A1 - Selmair, Maximilian A1 - Herrmann, Frank T1 - Social and Ecological Capabilities for a sustainable Hierarchical Production Planning T2 - Proceedings of the 30th EUROPEAN Conference on Modeling and Simulation (ECMS 2016), May 31st - June 3rd, 2016, Regensburg, Germany N2 - Production planning and production control mainly focus on optimising the entire production system of a company. On the basis of hierarchical planning as a suitable method for solving this task, this paper shows - besides the economic dimension taken into account so far - that there are also social and ecological effects which will have to be considered in the process of planning. For this purpose, we would like to indicate here which social and ecological parameters can be or have already been taken into account for master production scheduling, for lot sizing and resource scheduling. As a result, an overview has been created which presents the existing concepts of sustainable production planning and production control as well as the existing deficits regarding the sustainability perspective. KW - Hierarchische Produktionsplanung KW - Soziale Verantwortung KW - Ökologie KW - production planning KW - hierarchical planning KW - social variables KW - ecological variables KW - sustainable hierarchical production planning Y1 - 2016 U6 - https://doi.org/10.7148/2016-0432 ER - TY - CHAP A1 - Janssen, Larissa A1 - Herrmann, Frank A1 - Claus, Thorsten T1 - Beitrag zur Abfallreduktion mittels mathematischer Optimierung und simulationsbasierter Validierung BT - A contribution to the waste reduction by mathematical optimisation and simulation-based validation T2 - Proceedings of the 16th International Conference on Simulation in Production and Logistics, September 23 - 25, 2015, Dortmund, Germany N2 - Perishable goods with a shelf life of 3-5 days require frequent inventory controls in the food retail trade. Maintaining a high service level for these products in stores is difficult due to demand uncertainty. A high service level often leads to a lot of stock in stores. In case it is not sold, it is waste. As an approach towards waste volume reduction, the economic order quantity (EOQ) problem is optimised in combination with the delivery frequency problem on the basis of the microperiods, i.e. morning, midday, afternoon, and evening. The presented model is designed for multiple stores with one regional warehouse. The simulation model measures the waste volume in stores. Experiments show that the combined optimisation of both problems leads to a reduction of total costs and waste volume. KW - Bestandsmanagement KW - Bestellmengenplanung KW - Optimierung KW - Frischware Y1 - 2015 UR - http://www.asim-fachtagung-spl.de/asim2015/papers/Proof_127_Janssen-V2.pdf ER - TY - CHAP A1 - Selmair, Maximilian A1 - Herrmann, Frank A1 - Claus, Thorsten A1 - Teich, Enrico T1 - Potential of Reducing the Total Energy Consumption by Scheduling a Jobshop Production System T2 - Proceedings of the 16th International Conference on Simulation in Production and Logistics, September 23 - 25, 2015, Dortmund, Germany N2 - This research paper has evaluated the potential of reducing energy consumption by scheduling jobshop production systems with machines using standby modes in free times. The initial introduction of the planning issue is followed by a description of the approach to assess the available potential. Subsequently, the research procedure by means of simulation, a detailed discussion of the results and a perspective on future research is given. Moreover, the notion that scheduling influences the energy consumption in jobshop production systems is supported. The presented simulation research also documents that there is no direct correlation between energy consumption and total lead time, although this was presumed usually. Finally, this paper provides a forecast for a possible optimisation model as well as an exemplary model with an energy-optimised schedule plan. KW - Produktionsplanung KW - Reihenfolgeproblem KW - Energieverbrauch Y1 - 2015 SP - 375 EP - 384 ER - TY - CHAP A1 - Selmair, Maximilian A1 - Claus, Thorsten A1 - Trost, Marco A1 - Bley, Andreas A1 - Herrmann, Frank T1 - Job Shop Scheduling with Flexible Energy Prices T2 - Proceedings of the 30th EUROPEAN Conference on Modeling and Simulation, May 31st - June 3rd, 2016, Regensburg, Germany N2 - The rising energy prices – particularly over the last decade – pose a new challenge for the manufacturing industry. Reactions to climate change, such as the advancement of renewable energies, raise the expectation of further price increases and variations. Regarding the manufacturing industry, production planning and controlling can have a significant influence on the in-plant energy consumption. In this paper, we develop a scheduling method as a linear optimization model with the objective to minimize energy costs in a job shop production system. KW - Job Shop Scheduling KW - Flexible Energy Prices KW - Energy Efficient Production Planning KW - Energy Consumption KW - Standby Y1 - 2016 U6 - https://doi.org/10.7148/2016-0488 ER - TY - CHAP A1 - Herrmann, Frank A1 - Lange, Frederick A1 - Manitz, Michael T1 - Order release within hierarchical production planning and control using product specific clearing functions T2 - Proceedings of the International Annual Conference of the German Operations Research Society 2014 (OR 2014), Aachen, September 2 - 5, 2014, Germany KW - Hierarchische Produktionsplanung KW - Auftragsabwicklung KW - clearing functions Y1 - 2014 ER - TY - CHAP A1 - Herrmann, Frank T1 - Schrittweise Verbesserung des Realbetriebs einer Produktionslinie mit simultanem Produktionsfortschritt T2 - Tagungsband zu "Wissenstransfer in der Wirtschaftsinformatik" im Rahmen der MKWI 2016; vom 09. bis 11. März 2016 an der Technischen Universität Ilmenau in Thüringen KW - Produktionslinie KW - Produktionsfortschritt Y1 - 2016 SP - 19 EP - 26 ER - TY - CHAP A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Some remarks to the shape of Clearing Functions T2 - Proceedings of the International Annual Conference of the German Operations Research Society 2015 (OR 2015) Wien, September 1 - 4 KW - clearing functions KW - production planning Y1 - 2015 ER - TY - CHAP A1 - Herrmann, Frank T1 - Observations to Clearing Functions T2 - Proceedings of the 28th EURO Conference on Operations Research, July 12 - 15, 2015, Glasgow, Scotland KW - clearing functions Y1 - 2015 ER - TY - BOOK A1 - Herrmann, Frank T1 - Übungsbuch - Losbildung und Fertigungssteuerung BT - Aufgaben zur operativen Produktionsplanung und -steuerung N2 - Das Aufgabenbuch ergänzt die in Lehrbüchern erläuterten Verfahren der Losbildung und Fertigungssteuerung durch sehr detaillierte und präzise Lösungen. Losbildung und Fertigungssteuerung sind zentrale Kernelemente der operativen Produktionsplanung und -steuerung, insbesondere in kommerziell verfügbaren IT-Systemen. Daher sind diese Verfahren integrale Bestandteile von Veranstaltungen zur Produktion und Logistik, Produktionsplanung und -steuerungsysteme, Supply Chain Management usw. in Bachelor- und Masterstudiengängen an Hochschulen und Universitäten. Zu Beginn einer Lösung wird die verwendete Methodik soweit dargestellt, dass diese mit den in entsprechenden Vorlesungen gelehrten Inhalten ohne weitere Literatur verständlich ist. Einige Themen, wie die Betrachtung von knappen Kapazitäten und von schwankenden Durchlaufzeiten, gehen über den Inhalt von Standardlehrbüchern hinaus und dürften auch für Doktoranden interessant sein. KW - Produktionsplanung KW - Produktionssteuerung KW - PPS KW - Losgröße KW - Operative Planung KW - Aufgabensammlung Y1 - 2018 SN - 978-3-658-21567-5 U6 - https://doi.org/10.1007/978-3-658-21567-5 PB - Springer Fachmedien CY - Wiesbaden ER - TY - BOOK A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Materialbedarfsplanung und Ressourcenbelegungsplanung BT - Durchführung in Produktionsplanungs- und -steuerungssystemen und ihre Analyse KW - Materialbedarf KW - Produktionsplanung KW - Produktionssteuerung KW - PPS Y1 - 2017 SN - 978-3-658-12543-1 U6 - https://doi.org/10.1007/978-3-658-12543-1 PB - Springer Gabler CY - Wiesbaden ER - TY - JOUR A1 - Herrmann, Frank T1 - SIM-R/3: Softwaresystem zur Simulation der Regelung produktionslogistischer Prozesse durch das R/3-System der SAP AG JF - Wirtschaftsinformatik N2 - State of the art in enterprises is the control of business processes by enterprise resource planning systems (ERP systems) such as the R/3 system of SAP AG. A typical task in the implementation phase of ERP systems consists in the choice of an appropriate lot sizing procedure and the setup of its parameters. The existing procedures do not deliver the best results for each business process. So, a business specific setup is required. Unfortunately, there is no knowledge of good parameter settings for typical business processes. Therefore, different parameter settings have to be tested out on real business processes over long periods (e. g. over several years). Of course, such an approach fails due to time restrictions. In addition, the literature argues that an automated software process — contrary to a physical process — is often never called in question or further optimized. An alternative offers a simulation of business processes which is controlled by an ERP system. In the laboratory of information science and production logistics (LIP) at the University of Applied Sciences, Regensburg, a pilot implementation of a system for simulating the control of production processes by the SAP R/3-System (SIM-R/3) was developed. SIM-R/3 allows such a simulation over long periods. KW - Fertigungslogistik KW - Enterprise-Resource-Planning KW - Simulation KW - SAP R/3 KW - eM-Plant KW - Regelung produktionslogistischer Prozesse KW - Planungsverfahren und-parameter in ERP-Systemen Y1 - 2007 U6 - https://doi.org/10.1007/s11576-007-0034-5 VL - 49 IS - 2 SP - 127 EP - 133 ER -