TY - JOUR A1 - Herrmann, Frank T1 - Einstellung von Dispositionsarten in ERP- und PPS-Systemen JF - Productivity Management Y1 - 2011 IS - 3 SP - 45 EP - 47 PB - GITO-Verlag CY - Berlin ER - TY - JOUR A1 - Englberger, Julian A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Two-stage stochastic master production scheduling under demand uncertainty in a rolling planning environment JF - International Journal of Production Research N2 - This paper proposes a scenario-based two-stage stochastic programming model with recourse for master production scheduling under demand uncertainty. We integrate the model into a hierarchical production planning and control system that is common in industrial practice. To reduce the problem of the disaggregation of the master production schedule, we use a relatively low aggregation level (compared to other work on stochastic programming for production planning). Consequently, we must consider many more scenarios to model demand uncertainty. Additionally, we modify standard modelling approaches for stochastic programming because they lead to the occurrence of many infeasible problems due to rolling planning horizons and interdependencies between master production scheduling and successive planning levels. To evaluate the performance of the proposed models, we generate a customer order arrival process, execute production planning in a rolling horizon environment and simulate the realisation of the planning results. In our experiments, the tardiness of customer orders can be nearly eliminated by the use of the proposed stochastic programming model at the cost of increasing inventory levels and using additional capacity. KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung KW - Nachfrageverhalten KW - Stochastische Optimierung KW - Master production scheduling KW - Demand uncertainty KW - Two-stage stochastic programming KW - Scenario-based stochastic programming with recourse KW - Hierarchical production planning Y1 - 2016 U6 - https://doi.org/10.1080/00207543.2016.1162917 VL - 54 IS - 20 SP - 6192 EP - 6215 PB - Taylor & Francis ER - TY - JOUR A1 - Herrmann, Frank T1 - Automatisierte Durchführung von Bestandsmanagement-Projekten JF - wt Werkstattstechnik online N2 - Ein effizientes und effektives Bestandsmanagement ist wichtig, um die Auswirkungen etwa durch fehlende Produkte gering zu halten und die Lagerhaltungskosten zu minimieren. Die für viele Unternehmen geeigneten Formeln zum Bestandsmanagement und seine produktspezifische Anwendung werden in einem Leitfaden zusammengefasst und anhand eines realen Anwendungsfalls in diesem Fachbeitrag beschrieben. Eine manuelle Durchführung ist besonders aufwendig. Deshalb wird erläutert, welche Schritte des Leitfadens effektiv durch ein entsprechendes Programm durchgeführt werden können. KW - Bestandsmanagement Y1 - 2010 UR - https://www.werkstattstechnik.de/wt/article.php?data[article_id]=57155 IS - 10 SP - 819 EP - 824 CY - Berlin ER - TY - JOUR A1 - Herrmann, Frank A1 - Burgmayr, Georg T1 - Verknüpfung von Software zu einem IT-Logistiknetzwerk JF - MaschinenMarkt online N2 - Softwaresysteme sind für den Betrieb moderner Logistik- und Herstellungsbetriebe essenziell. Doch kaum eine auf dem Markt angebotene Lösung kann alle Anforderungen in Lager und Montage lückenlos abdecken. Kleine und mittlere IT-Unternehmen schließen sich zusammen - und damit diese Marktlücke. KW - Logistikunternehmen KW - Software Y1 - 2011 UR - https://www.mm-logistik.vogel.de/verknuepfung-von-software-zu-einem-it-logistiknetzwerk-a-297008/ PB - Vogel Business Media CY - Würzburg ER - TY - CHAP A1 - Herrmann, Frank ED - Fuchs, Gerhard ED - Müller, Christian ED - Ritz, Harald ED - Saint-Mont, Uwe T1 - Evaluierung von Standardsoftware zur Abbildung von Geschäftsprozessen T2 - Herausforderungen an die Wirtschaftsinformatik: Wissensmanagement, E-Business und ereignisgesteuerte Geschäftsprozesse in Echtzeit Y1 - 2007 U6 - https://doi.org/10.15771/978-3-936527-10-0 SP - 52 EP - 69 PB - Verlag News & Media CY - Berlin ER - TY - CHAP A1 - Herrmann, Frank A1 - Stumvoll, Ulrike T1 - Einstellung von Losgrößenheuristiken in ERP- bzw. PPS-Systemen T2 - Proceedings zu den 7. Wismarer Wirtschaftsinformatik-Tagen vom 3.-4. Juni 2010 an der Hochschule Wismar KW - PPS KW - Enterprise-Resource-Planning KW - Losgrößenplanung KW - Heuristik Y1 - 2010 ER - TY - CHAP A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Simulation als betriebliche Entscheidungshilfe T2 - Ergänzungsband zu den Proceedings zur 14. ASIM Fachtagung "Simulation in Produktion und Logistik", vom 6. bis 8. Oktober 2010 am Karlsruher Institut für Technologie, Karlsruhe KW - Produktion KW - Logistik KW - Simulation KW - Entscheidungsprozess Y1 - 2010 ER - TY - CHAP A1 - Herrmann, Frank T1 - Berechnung des Werts von Informationen im Supply Chain Management T2 - Tagungsband zum 100. MNU-Bundeskongress ; Regensburg, 5. bis 9. April 2009 KW - Supply Chain Management KW - Informationsmanagement Y1 - 2009 ER - TY - JOUR A1 - Wohanka, Christian A1 - Herrmann, Frank T1 - Anbindung von Halbleiter Fertigungsautomaten an die SAP NetWeaver Plattform JF - Industrie-Management KW - Fertigung KW - Automation KW - Halbleiterbauelement KW - SAP NetWeaver Y1 - 2008 IS - 2 SP - 39 EP - 42 PB - Gito Verlag CY - Bremen ER - TY - JOUR A1 - Heindl, Martina A1 - Herrmann, Frank T1 - Verkürzung von Ein- und Auslagerzeiten in Lagerprozessen JF - PPS-Management KW - Lagerhaltung KW - Lagerplanung Y1 - 2007 VL - 12 IS - 4 SP - 47 EP - 50 PB - GITO Verlag CY - Berlin ER - TY - BOOK A1 - Herrmann, Frank T1 - Operative Planung in IT-Systemen für die Produktionsplanung und -steuerung BT - Wirkung, Auswahl und Einstellhinweise von Verfahren und Parametern N2 - Die operative Planung in der Produktionslogistik besteht im Kern aus der Prognose von Bedarfen, dem Management von Lagerbeständen, der Planung des Produktionsprogramms, der Materialbedarfsplanung und der Fertigungssteuerung. Kommerziell verfügbare Enterprise Resource Planning-Systeme oder Produktionsplanungs- und -steuerungssysteme bieten hierfür sehr viele Verfahren mit vielen Einstellungsmöglichkeiten an, die in diesem Buch detailliert erläutert werden. Die ausführlichen Beispiele und Fallstudien erleichtern das Nachvollziehen der Einzelschritte dieser Verfahren. Die Alternativen haben zum Teil signifikante Auswirkungen auf Parameter wie Termineinhaltung, Durchlaufzeit und Kapitalbindung, die das Erreichen der Unternehmensziele maßgeblich beeinflussen. Zur Unterstützung von Anwendern wird die Wirkung dieser Einstellungsmöglichkeiten analysiert und es werden Hinweise bzw. Leitfäden zu ihrer Einstellung gegeben. KW - Enterprise-Resource-Planning KW - Operative Planung KW - PPS Y1 - 2011 SN - 978-3-8348-8172-4 U6 - https://doi.org/10.1007/978-3-8348-8172-4 PB - Vieweg+Teubner ER - TY - CHAP A1 - Vitzthum, Thorsten A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Can Aggregate Production Planning (APP) be modified to be as good as Master Production Scheduling (MPS) T2 - ACC Journal N2 - In diesem Beitrag wird anhand einer Fallstudie die Bedeutung der Hauptproduktionsprogrammplanung (HPPLAN) für die hierarchische Produktionsplanung herausgearbeitet werden. Dazu wird versucht das Ergebnis der aggregierten Gesamtplanung (AGGRPLAN) durch Veränderung einzelner Paramater so zu verbessern, dass es dem Ergebnis der HPPLAN entspricht. Im Rahmen der Untersuchungen konnten dabei Verbesserungen für einzelne Planungssituationen erzielt werden, eine generelle Lösung konnte jedoch nicht gefunden werden. Insbesondere der Einsatz eines geeigneten Kapazitätsreduktionsfaktors in Verbindung mit der Berücksichtigung der Durchlaufzeit führt zu einer Verbesserung der Lösung. Bei der Planung von mehr als einem Produkt ist allerdings schwierig einen geeigneten Kapazitätsreduktionsfaktor zu finden, da dieser abhängig von der Nachfrage ist. KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung KW - Fallstudie KW - Hierarchical production planning KW - Aggregate production planning (APP) KW - Master production scheduling (MPS) KW - Material requirement planning KW - Resource profiles Y1 - 2017 U6 - https://doi.org/10.15240/tul/004/2017-2-012 VL - 23 IS - 2 SP - 155 EP - 162 ER - TY - BOOK A1 - Herrmann, Frank T1 - Logik der Produktionslogistik N2 - Für kosteneffiziente und flexible Produktionsprozesse wurden und werden zunehmend ausgefeilte Verfahren eingesetzt. Sie entstammen dem Operations Research, der, deswegen, nach wie vor eine hohe Produktivität aufweist. Diese Verfahren berufen sich auf grundlegende Resultate der Produktionslogistik, die sich beweisen lassen und daher zeitlos gültig sind. Ihre Kenntnis ist für das Verständnis und die Einsatzmöglichkeiten, insbesondere die Grenzen, dieser Verfahren erforderlich. Es erlaubt auch die grundlegenden Stärken und Schwächen von manchen aktuell diskutierten Ansätzen zu analysieren. Die Konzepte und Verfahren werden im Detail begründet bzw. hergeleitet; dies schließt die Beweise ein, die überwiegend aus dem Internet heruntergeladen werden können. Zum schrittweisen Nachvollziehen der Konzepte und der Einzelschritte der Verfahren dienen die ausführlich erläuterten Beispiele. Das Buch richtet sich an Studierende der Wirtschaftswissenschaften, der Wirtschaftsinformatik und dem Operations Research sowie an Experten und Wissenschaftler, die sich für die Theorie zur Produktionslogistik interessieren. Stärken und Schwächen von aktuell diskutierten Ansätzen aufdecken. KW - Fertigungslogistik Y1 - 2009 SN - 978-3-486-84856-4 PB - Oldenbourg ER - TY - CHAP A1 - Trost, Marco A1 - Teich, Enrico A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Master Production Scheduling and the relevance of included social criteria T2 - ACC Journal N2 - Folgender Beitrag untersucht die Notwendigkeit einer Berücksichtigung von Mitarbeiterauslastungen und davon abhängiger Bearbeitungszeiten in der Hauptproduktionsprogrammplanung. Zudem wird aufgezeigt, dass dieses Themengebiet aktuell eine Forschungslücke darstellt. Aus diesem Grund wird ein selbst entwickeltes lineares Optimierungsmodell für die Hauptproduktionsprogrammplanung vorgestellt, welches soziale Kriterien und eine geeignete Fallstudie enthält. Die Ergebnisse verdeutlichen, dass erhebliche Abweichungen durch eine Ignoranz von Mitarbeiterauslastungen und davon abhängiger Bearbeitungszeiten entstehen. Deshalb ist eine Integration zu empfehlen. Allerdings wird auch deutlich, dass weitere Forschungen notwendig sind, speziell für die Bestimmung geeigneter Erschöpfungsfunktionen, so wie beispielsweise Funktionen für Lerneffekte existieren. KW - Fertigungsprogrammplanung KW - Personaleinsatz KW - Lineare Optimierung KW - Sustainability KW - Production planning and control KW - Master production scheduling KW - Linear optimization KW - Human fatigue Y1 - 2017 U6 - https://doi.org/10.15240/tul/004/2017-2-011 VL - 23 IS - 3 SP - 146 EP - 154 ER - TY - CHAP A1 - Trost, Marco A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Adapted Master Production Scheduling: Potential for Improving Human Working Conditions T2 - Proceedings of the 33th European Conference on Modelling and Simulation 2019 (ECMS), Caserta, Italy N2 - This article illustrates the problem of deficient working conditions like high work intensity and underlines the possibilities of production planning and control to improve them. However, an included literature search presents that previous approaches have predominantly considered social aspects within a short planning horizon and that there is a need for a long-term consideration. To address this research gap a linear optimization model for Master Production Scheduling is presented, which has been extended by basic aspects of personnel requirements planning and a control of personnel work intensity. The results show that improvements in working conditions can be achieved through adapted production planning without an automatically increase in costs. However , challenges in quantifying the corresponding social correlations are identified as well. KW - Produktionsplanung KW - Personalbedarfsplanung KW - Lineare Optimierung KW - Master Production Scheduling KW - Sustainability KW - Work Intensity KW - Workload Y1 - 2019 U6 - https://doi.org/10.7148/2019 VL - 33,1 SP - 310 EP - 316 ER - TY - CHAP A1 - Vitzthum, Thorsten A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Einfluss von Mitarbeiterqualifikationszeiten im Rahmen nachhaltiger Produktionsplanung T2 - Simulation in Produktion und Logistik 2017, Kassel, 20.-22. September N2 - This research paper evaluates the potential of reducing shortages and costs that are created by training measures as an example for measurement of extended qualification of key employees in sustainable production planning. Capacity planning with standard methods in Enterprise Resource Planning Systems, namely priority rules, are used. Almost always, the optimal solution is not found, although there is one. In addition, unnecessarily high stocks are built up. In real business situations, this causes lost profits. T2 - Influence of Employee Qualification Times in the Context of Sustainable Production Planning KW - Enterprise-Resource-Planning KW - Produktionsplanung KW - Betriebliche Fortbildung Y1 - 2017 UR - http://www.asim-fachtagung-spl.de/asim2017/papers/Proof_111_Vitzthum.pdf SP - 315 EP - 324 ER - TY - CHAP A1 - Forstner, Robert A1 - Stauber, Stephan A1 - Herrmann, Frank T1 - Simulationsstudie zur sequentiellen Behälterversorgung in der automatischen Intralogistik T2 - Simulation in Produktion und Logistik 2017, September 20 - 22, 2017, Kassel, Germany N2 - After explaining the necessity of sequential sorting processes within branched conveyor systems and introducing basic sequential controlling principles, this paper analyses with a simulation study different ways of implementing sequential supply processes for small load carriers in an abstracted automated intralogistics system. Simulation results show that a layout with sequencing systems with explicit buffer places can ensure much higher sequential throughput performances than a layout with a loop for sequencing or a layout which implements sequencing processes just with the control of carrier sources. Because of sequential control dependencies in the layout with buffer places, further experiments for sequential supply processes with different layouts forms have to be assessed. KW - Förderanlage KW - Sortieranlage KW - Materialflusssteuerung KW - Transportbehälter KW - Simulation Y1 - 2017 UR - http://www.asim-fachtagung-spl.de/asim2017/papers/Proof_124_Forstner.pdf SP - 489 EP - 498 ER - TY - JOUR A1 - Janssen, Larissa A1 - Diabat, Ali A1 - Sauer, Jürgen A1 - Herrmann, Frank T1 - A stochastic micro-periodic age-based inventory replenishment policy for perishable goods JF - Transportation Research Part E: Logistics and Transportation N2 - In this paper, we propose a micro-periodic inventory replenishment policy for quickly perishable goods with fixed and known lifetime of items, deterministic lead time, fixed given order cycle, mixed issuing policies (FIFO and LIFO), age-based stock, imperfect items and target customer service level under random demand. The inventory policy is based on time of day (morning, midday, afternoon or evening). The results of our simulation study show that the proposed micro-periodic inventory policy leads to waste reduction of 66% as well as a partial decrease in cost compared to inventory policy with planning on a daily basis. KW - Frischware KW - Bestandsmanagement KW - Bestellmengenplanung KW - Stochastisches Modell KW - Inventory KW - Micro-periodic KW - Perishable goods KW - Stochastic demand KW - Waste reduction KW - Simulation study KW - Simulation Y1 - 2018 U6 - https://doi.org/10.1016/j.tre.2018.08.009 VL - 118 IS - October SP - 445 EP - 465 PB - Elsevier ER - TY - JOUR A1 - Trost, Marco A1 - Teich, Enrico A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Ein lineares Optimierungsmodell zur Hauptproduktionsprogrammplanung mit Berücksichtigung sozialer Größen JF - uwf UmweltWirtschaftsForum N2 - Aufgrund weniger existenter sozialorientierter Forschungen im Rahmen der Produktionsplanung und -steuerung stellt dieser Beitrag ein lineares Optimierungsmodell für die Hauptproduktionsprogrammplanung vor, welches soziale Kriterien berücksichtigt. Erste Ergebnisse deuten an, dass geringe Kosten nicht durch eine maximierte Mitarbeiterauslastung entstehen sondern durch geringe Kapazitätsschwankungen. KW - Sustainability KW - Social dimension KW - Production planning and control KW - Master production scheduling KW - Linear optimisation KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung KW - Personaleinsatz KW - Lineare Optimierung Y1 - 2017 U6 - https://doi.org/10.1007/s00550-017-0454-7 VL - 25 SP - 71 EP - 80 ER - TY - BOOK A1 - Claus, Thorsten A1 - Herrmann, Frank A1 - Teich, Enrico T1 - Kostensimulation BT - Grundlagen, Forschungsansätze, Anwendungsbeispiele KW - Kostenanalyse KW - Simulation Y1 - 2019 SN - 978-3-658-25167-3 U6 - https://doi.org/10.1007/978-3-658-25168-0 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Trost, Marco A1 - Claus, Thorsten A1 - Teich, Enrico A1 - Selmair, Maximilian A1 - Herrmann, Frank T1 - Social and Ecological Capabilities for a sustainable Hierarchical Production Planning T2 - Proceedings of the 30th EUROPEAN Conference on Modeling and Simulation (ECMS 2016), May 31st - June 3rd, 2016, Regensburg, Germany N2 - Production planning and production control mainly focus on optimising the entire production system of a company. On the basis of hierarchical planning as a suitable method for solving this task, this paper shows - besides the economic dimension taken into account so far - that there are also social and ecological effects which will have to be considered in the process of planning. For this purpose, we would like to indicate here which social and ecological parameters can be or have already been taken into account for master production scheduling, for lot sizing and resource scheduling. As a result, an overview has been created which presents the existing concepts of sustainable production planning and production control as well as the existing deficits regarding the sustainability perspective. KW - Hierarchische Produktionsplanung KW - Soziale Verantwortung KW - Ökologie KW - production planning KW - hierarchical planning KW - social variables KW - ecological variables KW - sustainable hierarchical production planning Y1 - 2016 U6 - https://doi.org/10.7148/2016-0432 ER - TY - CHAP A1 - Janssen, Larissa A1 - Herrmann, Frank A1 - Claus, Thorsten T1 - Beitrag zur Abfallreduktion mittels mathematischer Optimierung und simulationsbasierter Validierung BT - A contribution to the waste reduction by mathematical optimisation and simulation-based validation T2 - Proceedings of the 16th International Conference on Simulation in Production and Logistics, September 23 - 25, 2015, Dortmund, Germany N2 - Perishable goods with a shelf life of 3-5 days require frequent inventory controls in the food retail trade. Maintaining a high service level for these products in stores is difficult due to demand uncertainty. A high service level often leads to a lot of stock in stores. In case it is not sold, it is waste. As an approach towards waste volume reduction, the economic order quantity (EOQ) problem is optimised in combination with the delivery frequency problem on the basis of the microperiods, i.e. morning, midday, afternoon, and evening. The presented model is designed for multiple stores with one regional warehouse. The simulation model measures the waste volume in stores. Experiments show that the combined optimisation of both problems leads to a reduction of total costs and waste volume. KW - Bestandsmanagement KW - Bestellmengenplanung KW - Optimierung KW - Frischware Y1 - 2015 UR - http://www.asim-fachtagung-spl.de/asim2015/papers/Proof_127_Janssen-V2.pdf ER - TY - CHAP A1 - Selmair, Maximilian A1 - Herrmann, Frank A1 - Claus, Thorsten A1 - Teich, Enrico T1 - Potential of Reducing the Total Energy Consumption by Scheduling a Jobshop Production System T2 - Proceedings of the 16th International Conference on Simulation in Production and Logistics, September 23 - 25, 2015, Dortmund, Germany N2 - This research paper has evaluated the potential of reducing energy consumption by scheduling jobshop production systems with machines using standby modes in free times. The initial introduction of the planning issue is followed by a description of the approach to assess the available potential. Subsequently, the research procedure by means of simulation, a detailed discussion of the results and a perspective on future research is given. Moreover, the notion that scheduling influences the energy consumption in jobshop production systems is supported. The presented simulation research also documents that there is no direct correlation between energy consumption and total lead time, although this was presumed usually. Finally, this paper provides a forecast for a possible optimisation model as well as an exemplary model with an energy-optimised schedule plan. KW - Produktionsplanung KW - Reihenfolgeproblem KW - Energieverbrauch Y1 - 2015 SP - 375 EP - 384 ER - TY - CHAP A1 - Selmair, Maximilian A1 - Claus, Thorsten A1 - Trost, Marco A1 - Bley, Andreas A1 - Herrmann, Frank T1 - Job Shop Scheduling with Flexible Energy Prices T2 - Proceedings of the 30th EUROPEAN Conference on Modeling and Simulation, May 31st - June 3rd, 2016, Regensburg, Germany N2 - The rising energy prices – particularly over the last decade – pose a new challenge for the manufacturing industry. Reactions to climate change, such as the advancement of renewable energies, raise the expectation of further price increases and variations. Regarding the manufacturing industry, production planning and controlling can have a significant influence on the in-plant energy consumption. In this paper, we develop a scheduling method as a linear optimization model with the objective to minimize energy costs in a job shop production system. KW - Job Shop Scheduling KW - Flexible Energy Prices KW - Energy Efficient Production Planning KW - Energy Consumption KW - Standby Y1 - 2016 U6 - https://doi.org/10.7148/2016-0488 ER - TY - CHAP A1 - Herrmann, Frank A1 - Lange, Frederick A1 - Manitz, Michael T1 - Order release within hierarchical production planning and control using product specific clearing functions T2 - Proceedings of the International Annual Conference of the German Operations Research Society 2014 (OR 2014), Aachen, September 2 - 5, 2014, Germany KW - Hierarchische Produktionsplanung KW - Auftragsabwicklung KW - clearing functions Y1 - 2014 ER - TY - CHAP A1 - Herrmann, Frank T1 - Schrittweise Verbesserung des Realbetriebs einer Produktionslinie mit simultanem Produktionsfortschritt T2 - Tagungsband zu "Wissenstransfer in der Wirtschaftsinformatik" im Rahmen der MKWI 2016; vom 09. bis 11. März 2016 an der Technischen Universität Ilmenau in Thüringen KW - Produktionslinie KW - Produktionsfortschritt Y1 - 2016 SP - 19 EP - 26 ER - TY - CHAP A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Some remarks to the shape of Clearing Functions T2 - Proceedings of the International Annual Conference of the German Operations Research Society 2015 (OR 2015) Wien, September 1 - 4 KW - clearing functions KW - production planning Y1 - 2015 ER - TY - CHAP A1 - Herrmann, Frank T1 - Observations to Clearing Functions T2 - Proceedings of the 28th EURO Conference on Operations Research, July 12 - 15, 2015, Glasgow, Scotland KW - clearing functions Y1 - 2015 ER - TY - BOOK A1 - Herrmann, Frank T1 - Übungsbuch - Losbildung und Fertigungssteuerung BT - Aufgaben zur operativen Produktionsplanung und -steuerung N2 - Das Aufgabenbuch ergänzt die in Lehrbüchern erläuterten Verfahren der Losbildung und Fertigungssteuerung durch sehr detaillierte und präzise Lösungen. Losbildung und Fertigungssteuerung sind zentrale Kernelemente der operativen Produktionsplanung und -steuerung, insbesondere in kommerziell verfügbaren IT-Systemen. Daher sind diese Verfahren integrale Bestandteile von Veranstaltungen zur Produktion und Logistik, Produktionsplanung und -steuerungsysteme, Supply Chain Management usw. in Bachelor- und Masterstudiengängen an Hochschulen und Universitäten. Zu Beginn einer Lösung wird die verwendete Methodik soweit dargestellt, dass diese mit den in entsprechenden Vorlesungen gelehrten Inhalten ohne weitere Literatur verständlich ist. Einige Themen, wie die Betrachtung von knappen Kapazitäten und von schwankenden Durchlaufzeiten, gehen über den Inhalt von Standardlehrbüchern hinaus und dürften auch für Doktoranden interessant sein. KW - Produktionsplanung KW - Produktionssteuerung KW - PPS KW - Losgröße KW - Operative Planung KW - Aufgabensammlung Y1 - 2018 SN - 978-3-658-21567-5 U6 - https://doi.org/10.1007/978-3-658-21567-5 PB - Springer Fachmedien CY - Wiesbaden ER - TY - BOOK A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Materialbedarfsplanung und Ressourcenbelegungsplanung BT - Durchführung in Produktionsplanungs- und -steuerungssystemen und ihre Analyse KW - Materialbedarf KW - Produktionsplanung KW - Produktionssteuerung KW - PPS Y1 - 2017 SN - 978-3-658-12543-1 U6 - https://doi.org/10.1007/978-3-658-12543-1 PB - Springer Gabler CY - Wiesbaden ER - TY - JOUR A1 - Herrmann, Frank T1 - SIM-R/3: Softwaresystem zur Simulation der Regelung produktionslogistischer Prozesse durch das R/3-System der SAP AG JF - Wirtschaftsinformatik N2 - State of the art in enterprises is the control of business processes by enterprise resource planning systems (ERP systems) such as the R/3 system of SAP AG. A typical task in the implementation phase of ERP systems consists in the choice of an appropriate lot sizing procedure and the setup of its parameters. The existing procedures do not deliver the best results for each business process. So, a business specific setup is required. Unfortunately, there is no knowledge of good parameter settings for typical business processes. Therefore, different parameter settings have to be tested out on real business processes over long periods (e. g. over several years). Of course, such an approach fails due to time restrictions. In addition, the literature argues that an automated software process — contrary to a physical process — is often never called in question or further optimized. An alternative offers a simulation of business processes which is controlled by an ERP system. In the laboratory of information science and production logistics (LIP) at the University of Applied Sciences, Regensburg, a pilot implementation of a system for simulating the control of production processes by the SAP R/3-System (SIM-R/3) was developed. SIM-R/3 allows such a simulation over long periods. KW - Fertigungslogistik KW - Enterprise-Resource-Planning KW - Simulation KW - SAP R/3 KW - eM-Plant KW - Regelung produktionslogistischer Prozesse KW - Planungsverfahren und-parameter in ERP-Systemen Y1 - 2007 U6 - https://doi.org/10.1007/s11576-007-0034-5 VL - 49 IS - 2 SP - 127 EP - 133 ER - TY - CHAP A1 - Herrmann, Frank A1 - Lange, Frederick A1 - Almeder, Christian T1 - Capacity estimation based on clearing functions for the capacitated lot-sizing problem T2 - Proceedings of the 5th International Workshop on Lot-Sizing, August 26th - 29th, 2014, Porto, Portugal N2 - Single-stage capacitated lot-sizing problems (CLSP) are essential for manyplanning tasks in production systems. Due to the hierarchical planning approach, which is widely used in industrial practice and implemented in commercial enterprise resource planning as well as production planning and controlsystems, a subsequent scheduling is necessary to gain executable productionplans. Capacity consumption depends on many factors as, for example, systems workload, machine availability, or yield. Thus, a feasible and optimalsolution of the CLSP may lead to unplanned delays after sequencing and processing the orders on the shop floor. Using a so called clearing function (CF),which represents the relationship between the workload and the output of a production system, this capacity consumption in a CLSP is improved in various ways and tested on a real-world application. KW - Hierarchische Produktionsplanung KW - Kapazitätsplanung KW - Losgröße KW - clearing functions Y1 - 2014 UR - https://www.emse.fr/~absi/IWLS2014/proceedings_IWLS_2014.pdf ER - TY - CHAP A1 - Herrmann, Frank T1 - Genetic algorithm with simulation for scheduling of a flow shop with simultaneously loaded stations T2 - Proceedings of the 28th EUROPEAN Conference on Modeling and Simulation, May 27th - 30th, 2014, Brescia, Italy N2 - In this study, a real world flow shop with a transportation restriction is regarded. This restriction reduces the set of feasible schedules even more than the no-buffer restrictions discussed in the literature in the case of limited storage. Still this problem is NP-hard. Since this scheduling problem is integrated in the usual hierarchical planning, the tardiness is minimised. Compared to even specific priority rule for this class of problems the suggested genetic algorithm delivers significant better results. The specific structure of this class of problems complicates the calculation of the performance criteria. This is solved by a simulation algorithm. Proceedings 28th European Conference on Modelling and Simulation. KW - Ablaufplanung KW - Hierarchische Produktionsplanung KW - Flow-shop-Problem KW - Reihenfolgeproblem KW - Genetischer Algorithmus KW - simulation of restrictions KW - scheduling KW - flow-shop KW - no-buffer (blocking) KW - no-wait KW - genetic algorithm KW - real world application Y1 - 2014 UR - http://www.scs-europe.net/dlib/2014/ecms14papers/simo_ECMS2014_0076.pdf ER - TY - JOUR A1 - Herrmann, Frank T1 - Simulation der Regelung von Unternehmensprozessen durch ein Enterprise Ressource Planning System am Beispiel von SAP R/3 Y1 - 2007 UR - https://www.hs-nordhausen.de/fileadmin/_migrated/content_uploads/FHN_Schriftenreihe_Heft_3_Herrmann_08_06_2007_01.pdf PB - Verlag der Hochschule Nordhausen ER - TY - JOUR A1 - Herrmann, Frank A1 - Tsakpinis, Athanassios A1 - Wiedermann, Wolfgang T1 - Praxisnahe Ausbildung an der FH-Regensburg mit dem Schwerpunkt SAP JF - Krcmar, Helmut; Rautenstrauch, Claus; Wittges, Holger und Schrader; Heino (Hrsg.): Wirtschaftsinformatik-Ausbildung mit SAP®-Software KW - Hochschulstudium KW - Wirtschaftsinformatik KW - Praxisbezug Y1 - 2006 PB - Josef Eul Verlag CY - Lohmar – Köln ER - TY - RPRT A1 - Wohanka, Christian A1 - Helmstreit, Herbert A1 - Herrmann, Frank T1 - Anbindung von Halbleiter Fertigungsautomaten an die SAP NetWeaver Plattform T2 - Forschungsbericht der Hochschule Regensburg KW - Fertigung KW - Automation KW - Halbleiterbauelement KW - SAP NetWeaver Y1 - 2006 SP - 51 EP - 58 PB - Weka Info Verlag CY - Regensburg ER - TY - CHAP A1 - Herrmann, Frank T1 - Simulated Determination and Usage of a Clearing Function for Leadtime Estimation T2 - Proceedings of the 27th EURO Conference on Operations Research, July 13 - 18, 2014, Barcelona, Spain KW - clearing functions KW - lead time estimation Y1 - 2014 ER - TY - RPRT A1 - Herrmann, Frank A1 - Kreutz, Michael T1 - Simulations-System für das R/3-System (SIM-R/3) der SAP AG T2 - Forschungsbericht der Hochschule Regensburg KW - SAP R/3 KW - Simulation Y1 - 2006 SP - 46 EP - 50 PB - Weka Info Verlag CY - Regensburg ER - TY - RPRT A1 - Heindl, Martina A1 - Herrmann, Frank A1 - Juraske, Erich T1 - Simulation von Einlagerstrategien T2 - Forschungsbericht der Hochschule Regensburg KW - Lagerhaltung KW - Raumbedarf KW - Simulation Y1 - 2007 SP - 30 EP - 39 PB - Weka Info Verlag CY - Regensburg ER - TY - JOUR A1 - Herrmann, Frank T1 - Scheduling a flow shop with simultaneously loaded stations: A real world application JF - Journal of Control Science and Engineering N2 - Companies use special designed flow shops, in order to satisfy specific demands. Products need to be transported (from one station to the next station) by a crane and the way of working of this crane excludes the intermediate storage (of a work piece). In addition, the way of working restricts the set of feasible schedules even more than the no-buffer restriction discussed in the literature in the case of limited storage. Since this scheduling problem is integrated in the usual hierarchical planning, the tardiness is minimised. A linear optimisation model is presented to provide a formal description of this NP-hard problem. It is also used to explain the performance of priority rule based heuristic solutions on small test problems. In detail, priority rules as well as a priority rule based branch and bound procedure are analysed; priority rules are regarded, because a priority rule is still the standard procedure for on-line scheduling in industrial practise. Out of successful priority rules in the literature the best one is identified by an extensive simulative investigation. An improved look-ahead is realised by a restricted search over all possible schedules. KW - Fließfertigung KW - Flow-shop-Problem KW - Scheduling KW - Real world flow shop with restrictions KW - No buffer and no wait KW - Minimising tardiness KW - Optimisation model KW - Priority rules KW - Priority rule based branch and bound procedure Y1 - 2015 U6 - https://doi.org/10.17265/2328-2231/2015.03.004 VL - 3 SP - 147 EP - 163 ER - TY - CHAP A1 - Vitzthum, Thorsten A1 - Herrmann, Frank T1 - Evidence of the Relevance of Master Production Scheduling for Hierarchical Production Planning. T2 - Proceedings, 31st European Conference on Modelling and Simulation (ECMS) 2017, 23rd - May 26th, Budapest, Hungary N2 - This paper deals with the significance of master production scheduling for hierarchical production planning. Production planning in a typical manufacturing organization is a sequence of complex decisions which depends on a number of factors, such as number of products, complexity of products, number of production sites, and number of work centres in each production site. The main idea in hierarchical production planning is to break down larger problems into smaller, more manageable sub problems. Starting with aggregate production planning, the benefits of using master production scheduling for material requirements planning will be conveyed. The main benefit of master production scheduling is more detailed planning. The production groups are thereby disaggregated into final products and the production site disaggregated into work centres. In order to plan capacities, resource profiles are used. By working with resource profiles production lead time data are taken into account to provide time-phased projections of the capacity requirements for each work centre (Vollmann et al. 2005). The case study will show that more accurate planning and consideration of production lead time through master production scheduling results in a demand program that can be realized without shortages or delays. KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung Y1 - 2017 SN - 978-0-9932440-4-9 U6 - https://doi.org/10.7148/2017-0475 ER - TY - CHAP A1 - Amann, Matthias A1 - Herrmann, Frank A1 - Lutz, Christian A1 - Meier, Markus ED - Barton, Thomas ED - Erdlenbruch, Burkhard ED - Herrmann, Frank ED - Müller, Christian T1 - Grad der Zerstörung für eine lokale Suche bei einer taktgetriebenen Fließfertigung T2 - Prozesse, Technologien, Anwendungen, Systeme und Management. Angewandte Forschung in der Wirtschaftsinformatik. Tagungsband zur 27. AKWI-Fachtagung vom 07. bis 10.09.2014 an der Oberbayerischen Technischen Hochschule Regensburg N2 - Unternehmen produzieren oftmals viele Varianten für ein kleines Kundensegment und in kleinen Stückzahlen auf sehr teuren Produktionsanlagen. Deren effiziente und effektive Nutzung erfordert eine möglichst gute Planung der Belegung der Stationen mit Aufträgen. Sehr wirkungsvoll bei Fertigungslinien sind lokale Suchverfahren. Sie erzielen ein lokales Optimum. Um ein globales Optimum zu erreichen, wird die Suche von einem anderen Punkt des Suchraums fortgesetzt. Dabei sollte kein willkürlicher Punkt gewählt werden, sondern nur ein Teil des lokalen Optimums zerstört werden. Unterschiedlich starke Zerstörungen werden für eine taktgetriebene Fließfertigung analysiert. KW - Fließvertigung KW - Fertigungsplanung KW - Optimierung Y1 - 2014 UR - http://www.akwi.de/documents/AKWI_Tagungsband2014.pdf SP - 44 EP - 54 PB - Verlag News & Media CY - Berlin ER - TY - CHAP A1 - Lange, Frederick A1 - Herrmann, Frank A1 - Claus, Thorsten T1 - Simulation based capacity estimation for a model of order release planning under the consideration of service levels T2 - Proceedings of the 15th International Conference on Simulation in Production and Logistics, October 9 - 11, 2013, Paderborn, Germany N2 - Clearing Functions describe the nonlinear relationship between the orders which are in process and the output in capacitated productions systems under high utilization. These Clearing Function can be derived analytical by using steady-state queuing models or empirical by using simulation. We show how to estimate a Clearing Function for a single-level multi-product production system by using a simulation model. This non-linear Clearing Function is integrated into a model of order release planning. We extend this model to consider the uncertainty of the demand by using a Beta service level. We compare our model with an inventory management policy under different demand conditions. KW - Clearing function KW - linear programming KW - order release planning KW - simulation Y1 - 2013 UR - http://www.scs-europe.net/conf/ecms2013/ecms2013proceedings.pdf SN - 978-0-9564944-6-7 SP - 741 EP - 747 ER - TY - CHAP A1 - Herrmann, Frank T1 - Simulation based priority rules for scheduling of a flow shop with simultaneously loaded stations T2 - Proceedings of the 27th EUROPEAN Conference on Modeling and Simulation, May 27th - 30th, 2013, Ålesund, Norway N2 - In this study, a real world flow shop with a transportation restriction is regarded. This restriction reduces the set of feasible schedules even more than the no-buffer restrictions discussed in the literature in the case of limited storage. Since this scheduling problem is integrated in the usual hierarchical planning, the tardiness is minimised. This NP-hard problem is solved by priority rules, because of the addressed dynamic environment (and a high number of jobs) at the company site. Due to the technological restrictions the real duration of a job is significantly larger than its net processing time. By a simulation of the processing time many priority rules are improved and some even significantly. With extensive simulations successful priority rules in the literature are analysed. KW - simulation of processing time KW - scheduling KW - flow-shop KW - no-buffer (blocking) KW - no-wait KW - priority rules KW - real world application KW - Hierarchische Produktionsplanung KW - Flow-shop-Problem KW - Reihenfolgeproblem Y1 - 2013 U6 - https://doi.org/10.7148/2013-0775 SP - 775 EP - 781 ER - TY - CHAP A1 - Metlicka, Magdalena A1 - Davendra, Donald A1 - Herrmann, Frank A1 - Meier, Markus A1 - Amann, Matthias T1 - GPU accelerated NEH algorithm T2 - Proceedings of the 2014 IEEE Symposium on Computational Intelligence in Production and Logistics Systems (CIPLS), Orlando, FL, 09.-12. Dec. 2014 N2 - This research aims to develop a CUDA accelerated NEH algorithm for the permutative flowshop scheduling problem with makespan criterion. NEH has been shown in the literature as the best constructive heuristic for this particular problem. The CUDA based NEH aims to speed up the processing time by utilising the GPU cores for parallel evaluation. In order to show the versatility and scalability of the CUDA based NEH, four new higher dimensional Taillard sets are generated. The experiments are conducted on the CPU and GPU and pairwise compared. Percentage relative difference and paired t-test both confirm that the GPU based NEH significantly improves on the execution time compared to the sequential CPU version for all the high dimensional problem instances. KW - Flow-shop-Problem KW - CUDA KW - Graphics processing units KW - Instruction sets KW - Kernel KW - Parallel processing KW - Synchronization KW - Algorithm design and analysis KW - Arrays KW - Parallelverarbeitung Y1 - 2014 U6 - https://doi.org/10.1109/CIPLS.2014.7007169 SP - 114 EP - 119 ER - TY - CHAP A1 - Herrmann, Frank T1 - Perturbation in Local Search for Scheduling T2 - Proceedings of the 29th EUROPEAN Conference on Modeling and Simulation, May 26th - 29th, 2015, Albena, Bulgaria N2 - Local search is an established meta heuristic for scheduling problems. To avoid of getting stucked in a local optimum, the achieved solution is destroyed. Usually, this is done randomly. Here, two problem specific procedures are suggested. One focuses on jobs with the highest difference between the actual processing time and the net processing time of the job and the other one tries to remove jobs which causes the highest idle time for themselves or other jobs. Comprehensive simulations of test scheduling problems as well as a real world application show that both problem specific procedures outperform a random procedure. KW - Ablaufplanung KW - Lokales Suchverfahren KW - Local search KW - Perturbation KW - Scheduling KW - Flow shop KW - Flow-shop-Problem Y1 - 2015 U6 - https://doi.org/10.7148/2015-0446 ER - TY - CHAP A1 - Herrmann, Frank T1 - Simulation of a stochastic model for master production scheduling in a hierarchical production planning system used in industrial practise to cope with demand uncertainty T2 - Proceedings of the 26th EURO Conference on Operations Research, July 1 - 4, 2013, Rome, Italy N2 - Demand uncertainty for master production scheduling is addressed over the last years by approaches of stochastic or robust optimisation. In this contribution a more detailed model is regarded. Instead of analysing the planning results by a cost function, and so implicitly assume that the plans are realizable, here the effects of robust master production scheduling are evaluated using a planning hierarchy that is common in industrial applications. The primary objective is to minimise tardiness of customer order deliveries, and the secondary objective is to minimise inventory of end products. Y1 - 2013 ER - TY - CHAP A1 - Englberger, Julian A1 - Herrmann, Frank T1 - Estimating Capacity Load Factors in Master Production Scheduling by the use of Stochastic Optimization T2 - Tagungsband zu der Tagung Logistikmanagement 2013, 10. - 13. Oktober 2013, Bremen, Deutschland KW - Produktionsplanung KW - Ablaufplanung KW - Kapazitätsplanung KW - Stochastische Optimierung Y1 - 2013 ER - TY - CHAP A1 - Davendra, Donald A1 - Herrmann, Frank A1 - Bialic-Davendra, Magdalena T1 - Scheduling tardiness constrained flow shop with simultaneously loaded stations using Genetic Algorithm T2 - Proceedings of the 4th International Conference on Intelligent Systems, Metaheuristics & Swarm Intelligence (ISMSI 2020): Thimphu, Kingdom of Bhutan during March 21-22, 2020 N2 - In this study, a real world flow shop with a transportation restriction is regarded. This restriction reduces the set of feasible schedules even more than the no-buffer restrictions discussed in the literature in the case of limited storage. Still this problem is NP-hard. Since this scheduling problem is integrated in the usual hierarchical planning, the tardiness is minimised. Compared to even specific priority rule for this class of problems the suggested genetic algorithm delivers significant better results. The specific structure of this class of problems complicates the calculation of the performance criteria. This is solved by a simulation algorithm. KW - simulation of restrictions KW - scheduling, KW - flow-shop KW - no-buffer (blocking) KW - no-wait KW - genetic algorithm KW - real world application KW - Ablaufplanung KW - Hierarchische Produktionsplanung KW - Flow-shop-Problem KW - Reihenfolgeproblem KW - Genetischer Algorithmus Y1 - 2020 U6 - https://doi.org/10.1145/3396474.3396475 PB - ACM ER - TY - CHAP A1 - Trost, Marco A1 - Claus, Thorsten A1 - Teich, Enrico A1 - Herrmann, Frank T1 - Die soziale Dimension in der nachhaltigen hierarchischen Produktionsplanung – Stand der Forschung und Ansätze zur Weiterentwicklung bestehender Planungsmodelle T2 - Proceedings zur NAMA 2016 (NAMA 2016), October 5th - 7th, 2016, Dresden, Germany N2 - Bei der Produktionsplanung steht die Optimierung des Produktionssystems eines Unternehmens im Vordergrund. In diesem Beitrag wird auf Basis der hierarchischen Produktionsplanung aufgezeigt, dass neben ökonomischen und ökologischen Aspekten insbesondere auch soziale Effekte bei der Entscheidungsfindung zu berücksichtigen sind. Dazu werden für die Hauptproduktionsprogrammplanung, die Losgrößenplanung und die Ressourcenbelegungsplanung dargelegt, welche sozialen Größen berücksichtigt werden können beziehungsweise bereits berücksichtigt sind. Überdies wird ein Modellansatz zur Hauptproduktionsprogrammplanung vorgestellt, der auf die Beseitigung identifizierter Forschungslücken abzielt. KW - Hierarchische Produktionsplanung KW - Nachhaltigkeit KW - Soziale Verantwortung Y1 - 2016 ER -