TY - JOUR A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Energy-Oriented Production Planning in Industry BT - A Systematic Literature Review and Classification Scheme JF - Sustainability N2 - Scarcity of resources, structural change during the further development of renewable energy sources, and their corresponding costs, such as increasing resource costs or penalties due to dirty production, lead industrial firms to adapt ecological actions. In this regard, research on energy utilization in production planning has received increased attention in the last years, resulting in a large number of research articles so far. With the paper at hand, we review the literature on energy-oriented production planning. The aim of this study is to derive similar core issues and related properties along energy-oriented models within hierarchical production planning. For this, we carry out a systematic literature review and analyze and synthesize 375 research articles. We classify the underlying literature with a novel two-dimensional classification scheme and identify three key topics and five frequently found characteristics, which are presented in detail throughout this article. Based on these results, we state several potentials for further research. KW - BI-OBJECTIVE OPTIMIZATION KW - EFFICIENT MULTIOBJECTIVE OPTIMIZATION KW - ELECTRICITY DEMAND RESPONSE KW - energy KW - FLEXIBLE JOB-SHOP KW - GREEN SCHEDULING OPTIMIZATION KW - HYBRID FLOW-SHOP KW - literature review KW - LOT-SIZING PROBLEM KW - MANUFACTURING SYSTEM KW - MULTIPURPOSE BATCH PLANTS KW - production planning KW - RENEWABLE ENERGY Y1 - 2021 U6 - https://doi.org/10.3390/su132313317 VL - 13 IS - 23 SP - 1 EP - 32 PB - MDPI CY - Basel ER - TY - JOUR A1 - Malovanij, Julian A1 - Herrmann, Frank T1 - Implementierung eines Treibers zur Anbindung von Mikrocontroller-basierten Maschinen über OPC-UA an das Konfigurations- und Inbetriebnahme-Tool von SSI Schäfer JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Das Thema „Implementierung eines Treibers zur Anbindung von Mikrocontroller-basierten Maschinen über OPC-UA an das Konfigurations- und Inbetriebnahme-Tool von SSI Schäfer“ soll zu einem Gerätetreiber für das Konfigurations- und Inbetriebnahme-Tool CPM führen, welcher den Anschluss von neuen Maschinen an ebendieses ermöglicht. Aktuell befinden sich diese noch in Entwicklung, jedoch sollen sie, von den Vorteilen des CPM-Tools profitieren, welches unter anderem den Inbetriebnahmeprozess einfacher und schneller gestalten kann. Ziel ist somit die Anbindung dieser Maschinen durch die Spezifikation einer Schnittstelle und der Implementierung dieser auf Basis der Schnittstellen des CPM-Tools, in welches sich der Gerätetreiber nahtlos einfügen soll. KW - Gerätetreiber KW - Mikrokontroller-basierte Maschinen KW - SPS KW - OPC-UA Y1 - 2024 U6 - https://doi.org/10.26034/lu.akwi.2024.6210 SN - 2296-4592 IS - 20 SP - 54 EP - 66 PB - AKWI ER - TY - CHAP A1 - Herrmann, Frank A1 - Manitz, Michael ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Ein hierarchisches Planungskonzept zur operativen Produktionsplanung und -steuerung T2 - Produktionsplanung und -steuerung N2 - Ausgangspunkt für die operative Produktionsplanung und -steuerung ist eine Infrastruktur aus Produktionsressourcen mit definierten Produktionskapazitäten, auf denen jeweils die Produktion eines oder mehrerer verschiedener Produkte erfolgen kann. Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-662-64291-7_2 SP - 9 EP - 25 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - CHAP A1 - Herrmann, Frank A1 - Lange, Frederick ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Belastungsorientierte Ansätze in der Produktionsplanung T2 - Produktionsplanung und -steuerung N2 - Unter Berücksichtigung aller Steuergrößen, Restriktionen und Bedingungen kann durch einen simultanen Planungsansatz ein optimaler Produktionsplan erstellt werden. Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-662-64291-7_9 SP - 159 EP - 182 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - CHAP A1 - Claus, Thorsten A1 - Herrmann, Frank A1 - Manitz, Michael ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Knappe Kapazitäten und Unsicherheit - Analytische Ansätze und Simulation in der Produktionsplanung und -steuerung T2 - Produktionsplanung und -steuerung Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-662-64291-7_1 SP - 3 EP - 7 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - CHAP A1 - Herrmann, Frank A1 - Englberger, Julian ED - Claus, Thorsten ED - Herrmann, Frank ED - Manitz, Michael T1 - Robuste Optimierung zur Produktionsprogrammplanung T2 - Produktionsplanung und -steuerung Y1 - 2021 SN - 978-3-662-64290-0 U6 - https://doi.org/10.1007/978-3-662-64291-7_4 SP - 39 EP - 61 PB - Springer Gabler CY - Berlin, Heidelberg ER - TY - JOUR A1 - Herrmann, Frank T1 - Using Optimization Models for Scheduling in Enterprise Resource Planning Systems JF - Systems N2 - Companies often use specially-designed production systems and change them from time to time. They produce small batches in order to satisfy specific demands with the least tardiness. This imposes high demands on high-performance scheduling algorithms which can be rapidly adapted to changes in the production system. As a solution, this paper proposes a generic approach: solutions were obtained using a widely-used commercially-available tool for solving linear optimization models, which is available in an Enterprise Resource Planning System (in the SAP system for example) or can be connected to it. In a real-world application of a flow shop with special restrictions this approach is successfully used on a standard personal computer. Thus, the main implication is that optimal scheduling with a commercially-available tool, incorporated in an Enterprise Resource Planning System, may be the best approach. KW - scheduling KW - optimization model KW - real world application KW - enterprise resource planning system KW - material requirements planning II KW - priority rules Y1 - 2016 U6 - https://doi.org/10.3390/systems4010015 VL - 4 IS - 1 SP - 1 EP - 15 PB - MDPI CY - Basel ER - TY - CHAP A1 - Trost, Marco A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Established production planning and control and its enhancement with sustainability T2 - Proceedings of the 37th ECMS International Conference on Modeling and Simulation (ECMS 2023): June 20th - June 23rd, 2023, Florence, Italy N2 - Against the background of the energy crisis, shortage of skilled workers, demographic change and other drivers, sustainable development is also becoming increasingly important for industrial companies. In this respect, production planning and control has an enormous influence on relevant objectives. In classical approaches of production planning and control as presented in this paper, economic-oriented objectives are taken into account to a large extent in decision making. This paper demonstrates that besides these classical models, a variety of approaches exist to influence ecological and social targets through production planning. These different models are assigned to sustainability areas and outlined by exemplary literature sources. Further research is needed, for instance, in the joint consideration of sustainability criteria along different planning levels and sustainable dimensions. KW - Sustainability KW - Social KW - Ecological KW - Hierarchical Production Planning Y1 - 2023 SN - 978-3-937436-80-7 U6 - https://doi.org/10.7148/2023-0320 SN - 2522-2422 SP - 320 EP - 327 PB - ECMS ER - TY - JOUR A1 - Trost, Marco A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Social Sustainability in Production Planning: A Systematic Literature Review JF - Sustainability N2 - Sustainable production includes economic, environmental, and social aspects. However, social sustainability has received less attention, especially compared to the economic aspects. Next to technical and organizational measures, social improvements within supply chains can also be achieved through suitable production planning. Within production planning, production programs are determined, and the assignment of available resources (e.g., employees) is specified. Thus, the utilization and workload of employees are defined. This systematic literature review investigates to what extent such employee-related social aspects are reflected in production planning and discusses whether economic aspects dominate them. For this, a Scopus database search was carried out and 76 identified approaches were analyzed and categorized regarding the occurring employee-related social aspects and their implementation. Thus far, the approaches mainly consider single aspects on single planning levels. A consideration of a broad set of aspects along the entire production planning has rarely been studied. In particular, health and safety aspects are considered on the levels of assembly line balancing and job rotation. However, their impact is primarily determined by the specific settings of the decision-maker. To support decision-makers, only a few studies have investigated the effects based on real application scenarios. Further potential might be an extended modeling of social and economic interdependencies and a consideration of employee-related social aspects in medium- to long-term production planning. KW - ASSEMBLY-LINE KW - employee KW - ERGONOMIC RISKS KW - FATIGUE KW - FLOWSHOP SCHEDULING PROBLEM KW - JOB ROTATION SCHEDULES KW - LINE BALANCING PROBLEM KW - literature review KW - MODEL KW - MUSCULOSKELETAL DISORDERS KW - production planning KW - social sustainability KW - SUPPLY CHAIN KW - WORKER ASSIGNMENT Y1 - 2022 U6 - https://doi.org/10.3390/su14138198 VL - 14 IS - 13 SP - 1 EP - 31 PB - MDPI CY - Basel ER - TY - BOOK A1 - Herrmann, Frank T1 - Lineare Optimierung unter Unsicherheit BT - eine Einführung N2 - Modellierungsalternativen werden mathematisch exakt formuliert; Stärken und Schwächen der derzeit eingesetzten Modellierungstechniken werden demonstriert; Leicht nachrechenbare Fallstudien Y1 - 2022 SN - 978-3-658-34580-8 U6 - https://doi.org/10.1007/978-3-658-34581-5 PB - Springer Fachmedien CY - Wiesbaden ER -