TY - CHAP A1 - Carrillo Li, Enrique Roberto A1 - Schorr, Philipp A1 - Kaufhold, Tobias A1 - Rodríguez Hernández, Jorge Antonio A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter ED - Awrejcewicz, Jan ED - Kaźmierczak, Markek ED - Olejnik, Paweł T1 - Kinematic analysis of the rolling locomotion of mobile robots based on tensegrity structures with spatially curved compressed components T2 - Applicable Solutions in Non-Linear Dynamical Systems; 15th International Conference "Dynamical Systems - Theory and Applications" (DSTA 2019, 2-5 December, 2019, Lodz, Poland N2 - In this work, a tensegrity structure with spatially curved members is applied as rolling locomotion system. The actuation of the structure allows a variation of the originally cylindrical shape to a conical shape. Moreover, the structure is equipped with internal movable masses to control the position of the center of mass of the structure. To control the locomotion system a reliable actuation strategy is required. Therefore, the kinematics of the system considering the nonholonomic constraints are derived in this paper. Based on the resulting insight in the locomotion behavior a feasible actuation strategy is designed to control the trajectory of the system. To verify this approach kinematic analyses are evaluated numerically. The simulation data confirm the path following due to an appropriate shape change of the tensegrity structure. Thus, this system enables a two-dimensional rolling locomotion. The use of mechanically compliant tensegrity structures in mobile robots is an attractive research topic, due to the possibility to adjust their mechanical properties reversibly during locomotion. In this paper rolling locomotion of mobile robots based on simple tensegrity structures, consisting of three compressed spatially curved members connected to a continuous net of prestressed tensional members, is discussed. Planar locomotion of these robots is induced by the movement of internal masses. The movement direction can be changed by changing the robot's shape between a cylinder and a truncated cone. The paper focuses on the description of the kinematics of these systems with respect to the shape change. KW - Inverse kinematics KW - Nonholonomic mechanics KW - Tensegrity structure Y1 - 2019 UR - http://212.191.87.54:1616/k16/awrejcewicz/publikacje/T2.pdf SN - 978-83-66287-30-3 SP - 335 EP - 344 PB - Wydawnictwo Politechniki Łódzkiej CY - Łódź, Polen ER - TY - JOUR A1 - Schorr, Philipp A1 - Carrillo Li, Enrique Roberto A1 - Kaufhold, Tobias A1 - Rodriguez Hernandez, Jorge Antonio A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter T1 - Kinematic analysis of a rolling tensegrity structure with spatially curved members JF - Meccanica N2 - In this work, a tensegrity structure with spatially curved members is applied as rolling locomotion system. The actuation of the structure allows a variation of the originally cylindrical shape to a conical shape. Moreover, the structure is equipped with internal movable masses to control the position of the center of mass of the structure. To control the locomotion system a reliable actuation strategy is required. Therefore, the kinematics of the system considering the nonholonomic constraints are derived in this paper. Based on the resulting insight in the locomotion behavior a feasible actuation strategy is designed to control the trajectory of the system. To verify this approach kinematic analyses are evaluated numerically. The simulation data confirm the path following due to an appropriate shape change of the tensegrity structure. Thus, this system enables a two-dimensional rolling locomotion. KW - Tensegrity structure KW - Inverse kinematics KW - Nonholonomic mechanics Y1 - 2021 U6 - https://doi.org/10.1007/s11012-020-01199-x SN - 0025-6455 VL - 56 SP - 953 EP - 961 PB - Springer ER -