TY - RPRT A1 - Siegl, Marco A1 - Ehrlich, Ingo A1 - Siegl, Marco A1 - Ehrlich, Ingo ED - Baier, Wolfgang T1 - Einfluss von Prozessparametern auf die Schmelzimprägnierung zur Herstellung von faserverstärkten Thermoplasten T2 - Forschung 2018 / Ostbayerische Technische Hochschule Regensburg N2 - Die Erforschung von faserverstärkten Kunststoffen (FVK) mit thermoplastischer Matrix ist aufgrund der Schweißeignung als Verbindungstechnologie, der thermischen Umformbarkeit, der Recyclebarkeit sowie der verkürzten Prozesszeiten im Vergleich zu den vorwiegend eingesetzten faserverstärkten Duroplasten erstrebenswert. Die Wechselwirkung zwischen den physikalischen, mechanischen und geometrischen Parametern erhöht den Komplexitätsgrad des Herstellungsprozesses. Ziel ist daher die Entwicklung einer Imprägniertechnik, die eine Fasertränkung mittels eines Thermoplastschmelzbades ermöglicht. Y1 - 2018 UR - https://doi.org/10.35096/othr/pub-1382 SP - 72 EP - 73 PB - VMK Verlag für Marketing & Kommunikation GmbH & Co. KG ER - TY - JOUR A1 - Putzer, Michael A1 - Ehrlich, Ingo A1 - Rasmussen, John A1 - Gebbeken, Norbert A1 - Dendorfer, Sebastian T1 - Sensitivity of lumbar spine loading to anatomical parameters JF - Journal of Biomechanics N2 - Musculoskeletal simulations of lumbar spine loading rely on a geometrical representation of the anatomy. However, this data has an inherent inaccuracy. This study evaluates the influence of defined geometrical parameters on lumbar spine loading utilising five parametrised musculoskeletal lumbar spine models for four different postures. The influence of the dimensions of vertebral body, disc, posterior parts of the vertebrae as well as the curvature of the lumbar spine was studied. Additionally, simulations with combinations of selected parameters were conducted. Changes in L4/L5 resultant joint force were used as outcome variable. Variations of the vertebral body height, disc height, transverse process width and the curvature of the lumbar spine were the most influential. These parameters can be easily acquired from X-rays and should be used to morph a musculoskeletal lumbar spine model for subject-specific approaches with respect to bone geometry. Furthermore, the model was very sensitive to uncommon configurations and therefore, it is advised that stiffness properties of discs and ligaments should be individualised. KW - Musculoskeletal simulation KW - Lumbar spine KW - Parameter study KW - Vertebra KW - Wirbelsäule KW - Belastung KW - Simulation Y1 - 2015 U6 - https://doi.org/10.1016/j.jbiomech.2015.11.003 VL - 49 IS - 6 SP - 953 EP - 958 PB - Elsevier Science ER - TY - CHAP A1 - Putzer, Michael A1 - Penzkofer, Rainer A1 - Ehrlich, Ingo A1 - Rasmussen, John A1 - Gebbeken, Norbert A1 - Dendorfer, Sebastian T1 - Musculoskeletal simulations to investigate the influence of vertebral geometrical parameters on lumbar spine loading T2 - 7th World Congress of Biomechanics, Boston, United States, 04/07/14 -11/07/14 Y1 - 2014 ER - TY - CHAP A1 - Schmid, Vinzent A1 - Jungbauer, Bastian A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Mottok, Jürgen ED - Ziemann, Olaf T1 - The influence of different types of fabrics on the fibre volume content and porosity in basalt fibre reinforced plastics T2 - 2nd Applied Research Conference 2012 - ARC 25./26. June 2012 N2 - High quality semi-finished products with reproducible properties of basaltic fibres are hardly available on the market. In order to examine the properties of basalt fibre reinforced plastics high quality specimens are necessary. The fibre volume content and the porosity of the produced specimen are used as the typical criteria to evaluate the achieved quality of the produced material. The effect of the geometrical properties of the different semi-finished products on the fibre volume contents is relatively small whereas the porosity content is considerably affected. Y1 - 2012 UR - https://www.researchgate.net/publication/268146522_The_influence_of_different_types_of_fabrics_on_the_fibre_volume_content_and_porosity_in_basalt_fibre_reinforced_plastics SP - 162 EP - 165 PB - Shaker ER - TY - CHAP A1 - Ladewig, Sven A1 - Siegl, Marco A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Bogner, Werner T1 - Discussion about Viscosity Theories for Fibre-Reinforced Thermoplastics T2 - Applied Research Conference 2018 - ARC 2018, 10 July, Deggendorf N2 - The effect of process variables such as shear rate and temperature on the viscosity of polypropylene during the processing of thermoplastic based composites was investigated in this study. The melt impregnation is used in the process of continuous glass fibre reinforced thermoplastic composites. To develop a mathematical model for roving impregnation, it's essential to know about the viscous behaviour of the matrix system. Therefore, this paper will discuss rheological models to describe these phenomena, based on the gathered viscosity data from the partner laboratory at the University of West Bohemia in Pilsen. Y1 - 2018 SP - 144 EP - 149 PB - Pro Business Verlag CY - Berlin ER - TY - CHAP A1 - Steinmann, Sven A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Stolle, Reinhard T1 - Investigation of transverse impact stress in fiber reinforced plastics under high-velocity impact and determination of the experimental procedure T2 - Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016 Y1 - 2016 PB - Pro Business Verlag CY - Berlin ER - TY - CHAP A1 - Schmid, Vinzent A1 - Jungbauer, Bastian A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Mottok, Jürgen ED - Ziemann, Olaf T1 - Diminution of mass of different types of fibre reinforcements due to thermal load T2 - Applied Research Conference 2012 - ARC 2012, 25./26. June 2012 Y1 - 2012 SP - 231 EP - 235 PB - Shaker ER - TY - CHAP A1 - Bohmann, T. A1 - Schlamp, Matthias A1 - Ehrlich, Ingo ED - Klippel, Clemens ED - Mottok, Jürgen ED - Reichenberger, Marcus T1 - Analysis of the Acoustic Emission Failure Frequencies of Glass Fiber Reinforced Composite Components T2 - Applied Research Conference 2017 - ARC, 7 July 2017, München Y1 - 2017 SP - 369 EP - 373 PB - Book-on-demand Verlag CY - Norderstedt ER - TY - CHAP A1 - Schmid, Vinzent A1 - Bruland, Matthias A1 - Ehrlich, Ingo A1 - Kastenmeier, Andreas ED - Rahman, Jamal ED - Heinze, Ronald T1 - Entwicklung und Regelung eines hydraulischen Biegeprüfstands T2 - Virtuelle Instrumente in der Praxis 2015 - Begleitband zum 20. VIP-Kongress. Y1 - 2015 PB - VDE-Verlag CY - Berlin/Offenbach ER - TY - CHAP A1 - Nübler, S. A1 - Schmid, Vinzent A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Stolle, Reinhard T1 - FEM-Simulation of a Tube to Flange Joint under Bending Load T2 - Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016 Y1 - 2016 PB - Pro Business Verlag CY - Berlin ER - TY - CHAP A1 - Romano, Marco A1 - Micklitz, Matthias A1 - Olbrich, Florian A1 - Bierl, Rudolf A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Experimental investigation of damping properties of unidirectionally and fabric reinforces plastics by the free decay method T2 - Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014 Y1 - 2014 SP - 665 EP - 679 ER - TY - JOUR A1 - Romano, Marco A1 - Eisenried, Michael A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Influence of parameters of the production process on the material quality of unidirectionally reinforced prepregs JF - Journal of Achievements in Materials and Manufacturing Engineering (JAMME) N2 - Purpose: A prepreg production device in laboratory scale is used to develop the production process of unidirectionally reinforced prepregs. Design/methodology/approach: The aim of the prepreg production device is to impregnate different types of reinforcement fibers with an arbitrarily selectable thermoset matrix system that completely satisfies the requirements for autoclave processing. As the prepreg production device is designed and built up modularly every module corresponds one step in the process. Findings: To identify the parameters of the production process and investigate its sensitivity on the material quality of both the prepreg as an uncured semi-finished product and the composite as the cured material experimental investigations regarding the resin flow, fiber volume content, mass per unit area and void content are carried out. Overall four material combinations have been investigated, where in each case the selected impregnation temperature and the width of the impregnation gap has been reproducibly varied in selected steps. Research limitations/implications: The experimental characterization of the prepregs and of the composite material is carried out according to German standards. Y1 - 2015 UR - http://jamme.acmsse.h2.pl/vol68_1/6815.pdf VL - 68 IS - 1 SP - 32 EP - 44 ER - TY - JOUR A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Parametric characterization of a mesomechanic kinematic caused by ondulation in fabric reinforced composites: analytical and numerical investigations JF - Frattura ed Integrità Strutturale (Fracture and Structural Integrity) N2 - A parametric characterization of a mesomechanic kinematic caused by ondulation in fabric reinforced composites is investigated by analytical and numerical investigations. Due to the definition of plain representative sequences of balanced plain-weave fabric reinforced single layers based on sines the variable geometric parameters are the amplitude and the length of the ondulation. The mesomechanic kinematic can be observed in both the analytic model and the FE-analyses. The analytic model yields hyperbolic correlations due to the strongly simplifying presumptions that neglect elasticity. In contrast the FE-analyses yield linear correlations in much smaller amounts due to the consideration of elastic parts, yet distinctly. Y1 - 2017 U6 - https://doi.org/10.3221/IGF-ESIS.39.22 VL - 11 IS - 39 SP - 226 EP - 247 ER -