TY - JOUR A1 - Sýkora, Miroslav A1 - Diamantidis, Dimitris A1 - Holický, Milan A1 - Marková, Jana A1 - Rózsás, Árpád T1 - Assessment of compressive strength of historic masonry using non-destructive and destructive techniques JF - Construction and Building Materials N2 - Masonry structures were built by various techniques using different materials, the properties of which exhibit a considerable scatter dependent on periods of construction and region-specific conditions. For historic structures with a heritage value, various non- or minor-destructive tests (NDTs) are commonly applied, while the application of destructive tests (DTs) is minimized. The contribution is based on investigations of 15 historic stone and clay brick masonry structures, for which NDT strengths of masonry units are verified by DTs. The proposed operational approach makes it possible to account for statistical uncertainty due to a limited number of DTs used to calibrate NDTs. KW - Calibration KW - Clay bricks KW - Compressive strength KW - Mortar KW - Non-destructive test KW - Statistical analysis KW - Stone masonry KW - Uncertainty Y1 - 2018 U6 - https://doi.org/10.1016/j.conbuildmat.2018.10.180 VL - 193 IS - December SP - 196 EP - 210 PB - Elsevier ER - TY - CHAP A1 - Sýkora, Miroslav A1 - Holický, Milan A1 - Rózsás, Árpád A1 - Barnardo-Viljoen, Celeste A1 - Retief, Johan Verster A1 - Diamantidis, Dimitris T1 - Risk Based Design of Infrastructures under Extreme Actions due to Environmental Change T2 - Life-cycle of engineering systems: emphasis on sustainable civil infrastructure, Symposium of the International Association for Life-Cycle Civil Engineering (IALCCE), 2016, Delft N2 - Environmental and climate change is a global issue that will and has already impacted the frequency and intensity of natural hazards in many regions throughout the world. Consequently, the actions on structures will be changing and present design practices will need to be adapted to provide for reliable structures with service lifetimes spanning over decades and centuries. A submitted review of present environmental and climate change information is focused on the distinct, but complementary climatic conditions of Central Europe and South Africa. An outline of the basis of structural design accounting for extreme wind and snow loads is presented and recommendations for future risk-based design procedures are discussed. Issues to consider include: a) use of extreme value models; b) implementation of changes in distribution parameters to obtain extremes with long return periods; c) consideration of the rate of the change. The example of a representative structure illustrates the effects of climatic actions on structural reliability. It appears that uncertainties related to the lack of observations hinder drawing strong conclusions concerning appropriate modifications of design procedures due to environmental and climate change. Uncertainties in the prediction of environmental and climate change have a direct bearing on optimal levels of reliability and the subsequent derivation of design values. Y1 - 2018 PB - Taylor & Francis ER -