TY - CHAP A1 - Laumer, Tobias A1 - Appel, Peter A1 - Stichel, Thomas A1 - Amend, Philipp T1 - Untersuchungen zum Absorptionsverhalten von Pulverschüttungen für das Laserstrahlschmelzen von Kunststoffen Conference T2 - Rapid.Tech, 2013, Erfurt N2 - Die Energieeinbringung in Form von elektromagnetischer Strahlung in das Pulverbett beim selektiven Laserstrahlschmelzprozess von Kunststoffen wird maßgeblich durch das Absorptionsverhalten der Pulverwerkstoffe bestimmt. Aufgrund von Vielfachreflexionen an den einzelnen Pulverpartikeln in den Poren weisen Pulverwerkstoffe im Vergleich zu makroskopischen Festkörpern andere Absorptionseigenschaften auf. Im vorliegenden Beitrag wird daher ein geeigneter Messaufbau zur Bestimmung der optischen Materialeigenschaften von verschiedenen Pulverwerkstoffen vorgestellt. Mittels eines Ulbricht-Kugel-Messaufbaus wird der Reflexions-, der Transmissions- und der Absorptionsgrad von pulverförmigen Werkstoffen bei einer Wellenlänge von 10,6 µm eines CO2-Lasers und unterschiedlichen Schichtstärken ermittelt. Neben den Werkstoffen Polyamid 12 und Polyethylen im reinen Zustand werden Mischungen mit Additiven, wie beispielsweise Graphit, analysiert und verglichen. Durch die Beimischungen kann eine für den Schmelzprozess zu geringe Absorption des reinen Kunststoffes wie im Fall von Polyethylen-Pulver bei einer Wellenlänge von 10,6 µm gezielt erhöht werden, wodurch die Entwicklung neuer Pulverwerkstoffe erleichtert wird. KW - Additive Fertigung KW - Laserstrahlschmelzen von Kunststoffen KW - Werkstoffqualifizierung Y1 - 2013 UR - https://www.researchgate.net/publication/274250200_Untersuchungen_zum_Absorptionsverhalten_von_Pulverschuttungen_fur_das_Laserstrahlschmelzen_von_Kunststoffen ER - TY - CHAP A1 - Laumer, Tobias A1 - Koopmann, Jonas A1 - Stichel, Thomas A1 - Amend, Philipp T1 - Generation of multi-material parts with alternating material layers by Simultaneous Laser Beam Meltingof polymers T2 - International Conference on Additive Technologies, 15 - 17 Oct 2014, Wien N2 - By using Additive Manufacturing technologies, like Laser Beam Melting (LBM) of polymers, parts can be realized within single days and necessary modifications can be quickly adapted. With increasing complexity, products are often made out of different polymer materials and the need for multi-material parts is an increasing industry requirement, which cannot be fulfilled by the single material parts realizable by LBM. Therefore, Simultaneous Laser Beam Melting (SLBM) as a new Additive Manufacturing technology offers the possibility to build parts consisting of different polymer materials. The realizable parts combine different material properties, like differing stiffness or chemical resistances, within a single part. Up to now, different materials are deposited next to each other on the building platform, thus the boundary surface between the different polymers is orientated perpendicular to the building direction. For this paper, the polymer powders are alternated in building direction. Thus, the boundary surface is orientated horizontally and is larger, both influencing the boundary surface and resulting part properties, which are analyzed by a high-resolution thermal imaging system and by cross sections. KW - additive manufacturing KW - Multi-Material Parts KW - Simultaneous Laser Beam Melting Y1 - 2014 UR - https://www.researchgate.net/publication/274250275_Generation_of_multi-material_parts_with_alternating_material_layers_by_Simultaneous_Laser_Beam_Meltingof_polymers ER - TY - CHAP A1 - Stichel, Thomas A1 - Amend, Philipp A1 - Laumer, Tobias A1 - Roth, Stephan T1 - Electrostatic Multi-Material Powder Deposition for Simultaneous Laser Beam Melting T2 - International Conference on Information, Communication and Automation Technologies (ICAT), 2014, Wien N2 - In this paper, the use of electrostatic polymer powder transfer methods for the preparation of multi-material layers is discussed with respect to the application in Simultaneous Laser Beam Melting (SLBM). Therefore, the basic principles of the single process steps as well as the challenges in combination with SLBM are considered verifying the critical process steps. On that base, process concepts are developed which might enable the fabrication of high quality multi-material parts in the future. Moreover, since the polymer powders typically used with Laser Beam Melting differ strongly from common toners for e. g. electrophotographic printing, an experimental setup was built to study the powder transfer with an electrically chargeable transfer plate using polyamide 12 powder. The results of this study show that transfer of powders usable for Laser Beam Melting can be achieved, but depends on the electric field strength which is a function of the gap between transfer and substrate plate and the intermediate electric potential. Y1 - 2014 UR - https://www.researchgate.net/publication/280154608_Electrostatic_Multi-Material_Powder_Deposition_for_Simultaneous_Laser_Beam_Melting ER - TY - CHAP A1 - Stichel, Thomas A1 - Amend, Philipp A1 - Laumer, Tobias A1 - Roth, Stephan T1 - Multi-material deposition of polymer powders with vibrating nozzles inside laser beam melting machines T2 - 6th International Conference on Additive Technologies - iCAT 2016 : proceedings : Nürnberg, Germany, 29.-30. November 2016 N2 - The generation of multi-material components using Laser beam melting (LBM) is a challenge which requires the invention of new coating devices for the preparation of arbitrary powder patterns. One solution is the usage of vibration-controlled nozzles for selective deposition of polymer powders. Powder flow can be initiated by vibration even when using powders with low flowability. In this report, the selective deposition of polymer powder by vibrating nozzles is investigated with respect to their application in LBM machines. Therefore, a steel nozzle attached to a piezo actor is applied, whereas the nozzle itself features internal channels which allow the precise control of the powder temperature using heat transfer oil. The setup is used to study the influence of temperature on the powder mass flow. The results show that, next to the vibration mode, the temperature strongly influences the powder mass flow which is done by affecting the moisture and thus the particle-particle adhesion forces. This shows that a precise control of the powder temperature inside the nozzle is required in order to achieve a constant mass flow and thus a successful application of vibrating nozzles inside LBM machines. KW - laser beam melting KW - multi-materialdeposition KW - PA12 KW - polyamide 12 KW - vibration-controlled powder nozzle Y1 - 2016 PB - Interesansa - zavod CY - Ljubljana ER - TY - CHAP A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Amend, Philipp A1 - Roth, Stephan A1 - Schmidt, Michael T1 - Analysis of Temperature Gradients during Simultaneous Laser Beam Melting of Polymers T2 - Physics Procedia N2 - By simultaneous laser beam melting (SLBM), different polymer powders can be processed to multi-material parts, which offers the potential to enlarge the field of application for conventional LBM. In a SLBM process, a powder bed consisting of different polymers and therefore with different melting and crystallization temperatures is deposited. Besides the use of infrared emitters for preheating the lower melting polymer, a CO2 laser distributes the necessary preheating temperature of the higher melting polymer. In the last step, a thulium fibre laser distributes the energy necessary for melting the two preheated powders simultaneously. In order to analyze the temperature gradients of the process on the powder surface and in deeper layers, a high-resolution thermal imaging system and thermocouples are used. KW - Additive manufacturing KW - Multi-Material Parts KW - Process Qualification KW - Simultaneous Laser Beam Melting Y1 - 2014 U6 - https://doi.org/10.1016/j.phpro.2014.08.159 VL - 56 SP - 167 EP - 175 PB - Elsevier ER - TY - CHAP A1 - Stichel, Thomas A1 - Laumer, Tobias A1 - Amend, Philipp A1 - Wittmann, Peter T1 - Selective deposition of polymer powder by vibrating nozzles for laser beam melting T2 - Proceedings of Laser in Manfacturing Conference 2015, June 22, 2015 - June 25, 2015, Munich, Germany N2 - In this report, the delivery of polyamide 12 (PA 12) powder and powder layer preparation by vibrating steel nozzles is investigated and discussed with respect to its application for laser beam melting. Therefore, a setup was realized which includes a steel nozzle attached to a piezo actor as well as a positioning system. In order t o investigate the mass flow characteristics in dependency on the applied vibration state, a weighing cell is used enabling time-resolved mass flow measurements. Moreover, single-layer patterns consisting of colored and uncolored polyamide 12 were created and characterized regarding surface homogeneity and selectivity before as well as after the melting of the powder layers by a hot plate. KW - laser beam melting KW - multi-material KW - polyamide 12 KW - vibrating nozzle Y1 - 2015 UR - https://www.wlt.de/lim/Proceedings/Stick/PDF/Contribution241_final.pdf ER - TY - CHAP A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Bock, Thomas A1 - Amend, Philipp A1 - Schmidt, Michael T1 - Characterization of temperature-dependent optical material properties of polymer powders T2 - AIP Conference Proceedings N2 - In former works, the optical material properties of different polymer powders used for Laser Beam Melting (LBM) at room temperature have been analyzed. With a measurement setup using two integration spheres, it was shown that the optical material properties of polymer powders differ significantly due to multiple reflections within the powder compared to solid bodies of the same material. Additionally, the absorption behavior of the single particles shows an important influence on the overall optical material properties, especially the reflectance of the powder bed. Now the setup is modified to allow measurements at higher temperatures. Because crystalline areas of semi-crystalline thermoplastics are mainly responsible for the absorption of the laser radiation, the influence of the temperature increase on the overall optical material properties is analyzed. As material, conventional polyamide 12 and polypropylene as new polymer powder material, is used. By comparing results at room temperature and at higher temperatures towards the melting point, the temperature-dependent optical material properties and their influence on the beam-matter interaction during the process are discussed. It is shown that the phase transition during melting leads to significant changes of the optical material properties of the analyzed powders. KW - laser beam melting KW - material qualification KW - Optical Material Properties KW - Polymers Y1 - 2014 U6 - https://doi.org/10.1063/1.4918508 IS - 1 PB - AIP Publishing ER - TY - CHAP A1 - Amend, Philipp A1 - Mrotzek, Tino A1 - Laumer, Tobias A1 - Wolf, Michel A1 - Roth, Stephan A1 - Gude, Maik A1 - Schmidt, Michael T1 - Experimental Investigations on Laser-based Hot-melt Bonding and Injection Molding for Laser-structured Metal Plastic Hybrids T2 - Laser in Manufacturing (LIM 2017), Munich, Germany N2 - The use of thermoplastics in lightweight construction is continuing to grow. This implies the need for suitable joining techniques to combine thermoplastics with other materials, such as metals, to gain tailored multi-material parts. In this paper latest results of experimental investigations on laser-based hot-melt bonding and injection molding for laser-structured metal plastic hybrids are presented. As materials stainless steel and short-fiber reinforced polyamide are used. The stainless steel surface is structured with a nanosecond pulse laser before joining to improve the mechanical adhesion between the dissimilar materials. Thereby, different structure depths in the range between 16.6 ± 1.2 µm and 66.5 ± 2.5 µm as well as different hatch distances between 70 and 300 µm are realized. The laser-based joining process is carried out irradiating the metallic surface multiple times. Positioned below the metal in T-joint configuration, the thermoplastic melts as a result of heat transfer and acts as hot-melt cohesive. Besides, hybrid joints are manufactured using injection molding. For experiments, the mold temperature as well as the melt temperature are varied. Regardless of the joining process, the hybrid joints are mechanically characterized by tensile tests. The results demonstrate that for both joining processes strong laser-structured metal plastic hybrids can be realized. KW - injection molding KW - laser structuring KW - Laser-based hot-melt bonding KW - multi-material design Y1 - 2017 UR - https://www.researchgate.net/publication/318110636_Experimental_Investigations_on_Laser-based_Hot-melt_Bonding_and_Injection_Molding_for_Laser-structured_Metal_Plastic_Hybrids SN - 978-3-87525-428-0 ER - TY - CHAP A1 - Amend, Philipp A1 - Laumer, Tobias A1 - Roth, Stephan A1 - Baat, Florian A1 - Schmidt, Michael T1 - Investigations on Laser-based Hot-melt Bonding of Additive Manufactured Plastic Parts to Metal Sheets for Strong and Tight Multi-material Joints T2 - Laser in Manufacturing (LIM 2017), Munich, Germany N2 - In this paper, first results regarding the realization of laser-based hot-melt bonding of additive manufactured plastics parts to metal sheets for strong and tight multi-material joints are presented. Compared to earlier investigations, in which nearly solely extruded plastic materials were applied, the use of additive manufactured plastics complements the research field with a promising approach. Besides the typical advantages of multi-material joints regarding weight reduction and high strengths, such parts can meet the needs of constructional freedom and the avoiding of tool costs. Materials used for this paper are aluminum (AlMg3), stainless steel (1.4301) and polyamide 12 (PA12). The performed experiments resulting in multi-material joints between metal and polyamide. The realized specimens undergo a tensile shear test and a tightness test, in which the characteristics of the joints are determined. KW - additive manufacturing KW - Laser-based hot-melt bonding KW - multi-material joint Y1 - 2017 UR - https://www.researchgate.net/publication/318110485_Investigations_on_Laser-based_Hot-melt_Bonding_of_Additive_Manufactured_Plastic_Parts_to_Metal_Sheets_for_Strong_and_Tight_Multi-material_Joint ER - TY - CHAP A1 - Laumer, Tobias A1 - Stichel, Thomas A1 - Amend, Philipp A1 - Schmidt, Michael A1 - Gachot, A. T1 - Simultaneous Energy Deposition for Laser Beam Melting of Polymers T2 - Proceedings of the Polymer Processing Society 29th Annual Meeting, Nürnberg, 2013 Y1 - 2013 PB - American Institute of Physics CY - New York ER - TY - CHAP A1 - Laumer, Tobias A1 - Stichel, T. A1 - Sachs, Marius A1 - Amend, Philipp A1 - Schmidt, Michael ED - Bártolo, Paulo T1 - Qualification and modification of new polymer powders for laser beam melting using Ulbricht spheres T2 - High value manufacturing : Advanced research in virtual and rapid prototyping ; Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, Leiraia, Portugal, 1-5 October, 2013 N2 - The restricted amount of available materials for Laser Beam Melting (LBM) of polymers is one of the main limitations for expanding the technology. Current qualification methods deal with problems like inadequate powder flowability or high part porosities among others but do not offer a detailed analysis of the important beam-matter-interaction between powder particles and electro-magnetic laser radiation. In this paper, polyethylene powder is qualified for the LBM process and specifically analyzed regarding the optical material properties of the powder for a wavelength of 10.6 μm. By admixing graphite as absorption intensifier the change of the optical material properties and the thereby connected processing parameters are analyzed. Furthermore an explanation approach is given to explain the relation between different transmittances of different powder particles and the optical material properties of the polymer powders. Y1 - 2014 UR - https://www.researchgate.net/publication/286311000_Qualification_and_modification_of_new_polymer_powders_for_laser_beam_melting_using_Ulbricht_spheres SN - 978-1-138-00137-4 SN - 1138001376 SP - 255 EP - 260 PB - CRC Press CY - Boca Raton ER -