TY - CHAP A1 - Nübler, S. A1 - Schmid, Vinzent A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Stolle, Reinhard T1 - FEM-Simulation of a Tube to Flange Joint under Bending Load T2 - Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016 Y1 - 2016 PB - Pro Business Verlag CY - Berlin ER - TY - CHAP A1 - Steinmann, Sven A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Stolle, Reinhard T1 - Investigation of transverse impact stress in fiber reinforced plastics under high-velocity impact and determination of the experimental procedure T2 - Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016 Y1 - 2016 PB - Pro Business Verlag CY - Berlin ER - TY - CHAP A1 - Bohmann, T. A1 - Schlamp, Matthias A1 - Ehrlich, Ingo ED - Klippel, Clemens ED - Mottok, Jürgen ED - Reichenberger, Marcus T1 - Analysis of the Acoustic Emission Failure Frequencies of Glass Fiber Reinforced Composite Components T2 - Applied Research Conference 2017 - ARC, 7 July 2017, München Y1 - 2017 SP - 369 EP - 373 PB - Book-on-demand Verlag CY - Norderstedt ER - TY - CHAP A1 - Nonn, Aida A1 - Kalwa, Christoph T1 - Simulation of ductile crack propagation in high-strength pipeline steel using damage models T2 - 9th International Pipeline Conference 2012 (IPC 2012), Calgary, Canada N2 - The performance of engineering design of high-strength steel pipelines has revealed the necessity to revise current design procedures. Therefore, an improved and detailed comprehension of fracture mechanisms and development of failure prediction tools are required in order to derive new design criteria. In last decades the most successful failure prediction tools for steel structures subjected to various type of loading can be encountered in the field of damage mechanics. This paper aims to describe ductile fracture behavior of high-strength steel pipelines by applying three different damage models, Gurson-Tvergaard-Needelman (GTN), Fracture Locus Curve (FLC) and Cohesive Zone (CZ). These models are evaluated regarding their capability to estimate ductile crack propagation in laboratory specimens and linepipe components without adjusting the calibrated parameters. It can be shown that appropriate parameter sets can be identified to reproduce load-deformation and fracture resistance curves accurately. The strain rate effect on the fracture behavior is examined by dynamic tests on the BDWT specimens. Finally, the shortcomings of the applied models are pointed out with the reference to possible extensions and modifications. Y1 - 2012 U6 - https://doi.org/10.1115/IPC2012-90653 ER - TY - CHAP A1 - Keim, Vincent A1 - Nonn, Aida A1 - Lenz, D. A1 - Brinnel, Viktoria A1 - Münstermann, Sebastian T1 - Simulation of the ductile fracture behaviour of high toughness pipeline steels using combined damage models T2 - Proceedings of the conference on Technology for future and ageing piplines, Ghent, Belgium Y1 - 2018 ER - TY - CHAP A1 - Schmid, Vinzent A1 - Jungbauer, Bastian A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Mottok, Jürgen ED - Ziemann, Olaf T1 - Diminution of mass of different types of fibre reinforcements due to thermal load T2 - Applied Research Conference 2012 - ARC 2012, 25./26. June 2012 Y1 - 2012 SP - 231 EP - 235 PB - Shaker ER - TY - CHAP A1 - Schmid, Vinzent A1 - Jungbauer, Bastian A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Mottok, Jürgen ED - Ziemann, Olaf T1 - The influence of different types of fabrics on the fibre volume content and porosity in basalt fibre reinforced plastics T2 - 2nd Applied Research Conference 2012 - ARC 25./26. June 2012 N2 - High quality semi-finished products with reproducible properties of basaltic fibres are hardly available on the market. In order to examine the properties of basalt fibre reinforced plastics high quality specimens are necessary. The fibre volume content and the porosity of the produced specimen are used as the typical criteria to evaluate the achieved quality of the produced material. The effect of the geometrical properties of the different semi-finished products on the fibre volume contents is relatively small whereas the porosity content is considerably affected. Y1 - 2012 UR - https://www.researchgate.net/publication/268146522_The_influence_of_different_types_of_fabrics_on_the_fibre_volume_content_and_porosity_in_basalt_fibre_reinforced_plastics SP - 162 EP - 165 PB - Shaker ER - TY - THES A1 - Wiedemann, Matthias T1 - Datenmodelle in der Abwasserableitung BT - Ansatz zur Konvertierung von ISYBAU-XML-Daten nach IFC N2 - Das Bauwesen erfährt zurzeit eine zunehmende Digitalisierung von Planungs- und Bauprozessen. Ein Begriff, der dabei zwingend fallen muss, ist Building Information Modeling (BIM). Es handelt sich dabei um eine kooperative Arbeitsmethode mit dem Ziel einer höheren Planungs-, Kosten- und Terminsicherheit. Wesentlicher Bestandteil von BIM ist das digitale Modell des Bauwerks, das über dessen gesamten Lebenszyklus von der Planung über die Ausführung bis zum Unterhalt und Rückbau mit Informationen ergänzt wird. Der gewünschte Effekt ist dabei eine größere Informationsdichte, auf welche die Projektbeteiligten über die Projektphasen hinweg zugreifen und somit einem Informationsverlust vorbeugen können. KW - Abwasserableitung KW - Building Information Modeling KW - Datenmodell Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-8157 CY - Regensburg ER - TY - CHAP A1 - Schmid, Vinzent A1 - Bruland, Matthias A1 - Ehrlich, Ingo A1 - Kastenmeier, Andreas ED - Rahman, Jamal ED - Heinze, Ronald T1 - Entwicklung und Regelung eines hydraulischen Biegeprüfstands T2 - Virtuelle Instrumente in der Praxis 2015 - Begleitband zum 20. VIP-Kongress. Y1 - 2015 PB - VDE-Verlag CY - Berlin/Offenbach ER - TY - CHAP A1 - Weber, Karsten ED - Fischer, Peter ED - Hubig, Christoph ED - Koslowski, Peter T1 - Soziale Aspekte non-proprietärer Software T2 - Wirtschaftsethische Fragen der E-Economy N2 - Non-proprietäre Software1entsteht in einer eher lockeren Form der Kooperation; deshalb ist die Zuordnung von Verantwortung für Folgen des Einsatzes entsprechender Software problematisch. Hinzu kommt, dass die GNU2General Public License (GPL3) und die Open Source-Definition4(dies gilt auch für andere Lizenzen non-proprietärer Software) explizit die Ablehnung der Verantwortung für Folgen des Softwareeinsatzes beinhalten. Nichtsdestotrotz ist die Welt non-proprietärer Software mitnichten so homogen, wie dies in vielen Darstellungen unterstellt wird, die inzwischen eine weitere Öffentlichkeit als nur jene der Computerfreaks erreicht haben. Sie zerfällt in sehr unterschiedliche Fraktionen oder — vielleicht besser —Sekten.Wir finden die Free Software Foundation (FSF) und ihre Anhänger rund um Richard Stallman, die Open Source-Bewegung, die stark von Eric S. Raymond bestimmt wird, außerdem die Linux-Gemeinde mit ihrem Frontmann Linus Torvalds und weiter im Hintergrund die verschiedenen BSD-Entwicklungszweige5. Ein wenig gleicht die Situation jener der verschiedenen Befreiungsbewegungen im Monty-Python-Film „The Life of Brian“: Alle beschimpfen sich gegenseitig als „Spalter“ und sind damit beschäftigt, sich gegen die jeweils anderen Gruppen abzugrenzen. Weniger komödiantisch ist jedoch, dass die Bewegungen rund um non-proprietärer Software Tendenzen zeigen, ins Ideologische6und Religiöse abzugleiten: hier stoßen Gläubige aufeinander — fundamentalistisch, kompromisslos, unbeirrbar. Sie verehren ihre Heiligen, besitzen ihr Glaubensbekenntnis und haben einen Gegner. Y1 - 2002 U6 - https://doi.org/10.1007/978-3-642-57345-3_12 SP - 202 EP - 213 PB - Physica CY - Heidelberg ER - TY - CHAP A1 - Haug, Sonja A1 - Weber, Karsten T1 - Kaufen oder Tauschen? Reziprozität und rationales Handeln bei Tauschvorgängen unter Freunden und in Internet-Tauschbörsen T2 - Jahrbuch für Handlungs- und Entscheidungstheorie 2/2002 N2 - Im Internet haben sich eine Reihe von Tauschringen etabliert, die den nichtkommerziellen Tausch von Musik und Software ermöglichen — und sich dabei in einer rechtlichen Grauzone oder in der Illegalität bewegen. Die Teilnehmer, die zur Entstehung und Aufrechterhaltung dieser Art von „Kollektivgut“ beitragen, nehmen Kosten und Risiken auf sich, obwohl keinerlei finanzielle Anreize und keine Sanktionsmöglichkeiten bei Verletzung der Reziprozität existieren. Diese Entwicklung stellt in vielfacher Hinsicht eine besondere Tatsache dar. Das Internet kann als prototypisch für eine faktisch anonyme Begegnungsstätte gesehen werden, innerhalb derer die Lösung des Vertrauensproblems beim Tausch zwischen unbekannten Akteuren oder die Verhinderung von Trittbrettfahrern besonders unwahrscheinlich ist. Modernitätskritiker behaupten deshalb, dass eine Gefahr für die Gesellschaft besteht, wenn im Internet zwischenmenschliche Kontakte vermehrt durch unpersönliche Transaktionen ohne jeden Verpflichtungscharakter ersetzt werden, da Treffen in elektronischen Foren nicht mit realen Kontakten gleichzusetzen seien (Putnam 1999: 67). Die Vertreter der Free Speech-Bewegung halten dagegen, dass gerade das Internet zur Entstehung von Gemeinschaften beiträgt, da es die engen Grenzen herkömmlicher Normen- und Kontrollsysteme überwindet. Können moderne Tauschringe im Internet als ein Indikator für die Entstehung von einer neuen Art von Kooperation und Gemeinschaftlichkeit betrachtet werden, wie dies von Enthusiasten der „Virtual Community“ (Rheingold 2000) oder Betrachtern der „Community in Cyberspace“ (Smith, Kollock 1999) postuliert wird? Entstehen bei den Beteiligten moralische Einstellungen und Normen wie die sogenannte „Hackerethik“ (Himanen 2001), die das Verhalten im Internet leiten und so zum Beispiel Trittbrettfahrertum erfolgreich verhindern? Oder zeigen die weitgehend oder völlig auf Anonymität basierenden sozialen Netzwerke im Internet, dass Interaktions- und Tauschsysteme mit rationalen Akteuren auch ohne jegliche moralische Unterfütterung funktionieren können, wie dies von Vertretern der Rational-Choice-Theorie postuliert und innerhalb des theoretischen Rahmens der Spieltheorie experimentell untersucht wird? Wie lassen sich die Handlungen von Teilnehmern an Internet-Tauschbörsen beschreiben und was motiviert sie? Diese Fragen sollen im folgenden Beitrag anhand eines empirischen Beispiels, dem Musik-Tausch per kopierter CD und per MP3 im Internet, untersucht werden. Y1 - 2003 U6 - https://doi.org/10.1007/978-3-322-97555-3_4 SP - 53 EP - 90 PB - Leske+Budrich CY - Opladen ER - TY - CHAP A1 - Weber, Karsten ED - Beyer, Lothar ED - Frick, D. ED - Gadatsch, Andreas ED - Maucher, I. ED - Paul, H. T1 - E-Society – Sie werden es erleben ... T2 - Vom E-Business zur E-Society. New Economy im Wandel Y1 - 2003 UR - https://www.researchgate.net/publication/263822044_E-Society_-_Sie_werden_es_erleben SP - 195 EP - 217 PB - Hampp CY - München ER - TY - CHAP A1 - Weber, Karsten ED - Debatin, B. ED - Funiok, R. T1 - Medienethik und politische Ethik - der Versuch einer Grundlegung T2 - Kommunikations- und Medienethik. Grundlagen - Ansätze - Anwendungen Y1 - 2003 UR - https://www.researchgate.net/publication/263822273_Medienethik_und_politische_Ethik_-_der_Versuch_einer_Grundlegung SP - 97 EP - 110 PB - UVK-Verl.-Ges. CY - Konstanz ER - TY - CHAP A1 - Weber, Karsten ED - Busch, D. ED - Panasiuk, I. ED - Schröder, Hartmut T1 - Ethnische Minderheiten und das Recht auf freie Meinungsäußerung T2 - Medientransformationsprozesse, Gesellschaftlicher Wandel und Demokratisierung in Osteuropa, Dokumentation der Jahrestagung des Center for Advanced Central European Studies am 16., 17. und 18. Mai 2001 in Frankfurt (Oder) ; Wie sich die Bilder (an-)gleichen Y1 - 2003 SP - 57 EP - 71 PB - Peter Lang CY - Frankfurt/Main ER - TY - CHAP A1 - Weber, Karsten ED - Dittrich, Klaus T1 - Ethische Leitlinien: inhaltlich oder prozedural? T2 - Informatik 2003 - Innovative Informatikanwendungen, Band 2 der Beiträge der 33. Jahrestagung der Gesellschaft für Informatik e.V. (GI), 29. September - 2. Oktober 2003 in Frankfurt am Main N2 - Der neue Entwurf der ethischen Leitlinien nimmt in der Präambel Bezug auf die Allgemeine Erklärung der Menschenrechte der Vereinten Nationen; außerdem wird mit Artikel 11 die soziale Verantwortung von Informatikerinnen und Informatikern inhaltlich ausformuliert. Infrage steht nun, ob die Explizierung solcher moralischer Forderungen in den ethischen Leitlinien akzeptabel ist oder ob damit nicht deren Möglichkeiten überdehnt werden. Anders ausgedrückt: Sollen die ethischen Leitlinien rein prozedural ausgerichtet sein oder stattdessen konkrete Zielvorgaben formuliert werden? Um diese Frage zu beantworten, werden zunächst die genannten Alternativen der Formulierung dargestellt. Dem folgt eine kritische Auseinandersetzung mit dem neuen Artikel 11 und dem Bezug auf die Allgemeine Erklärung der Menschenrechte. Zuletzt werden Gründe und Bedingungen für die Akzeptabilität dieser und gegen eine Aufnahme weitergehender moralischer Forderungen genannt. Y1 - 2003 UR - https://dl.gi.de/handle/20.500.12116/29682 SP - 188 EP - 193 PB - Gesellschaft für Informatik e.V. CY - Bonn ER - TY - CHAP A1 - Bittner, Peter A1 - Hornecker, Eva A1 - Twisselmann, Ute A1 - Weber, Karsten ED - Dittrich, Klaus T1 - Die berufliche Situation informatisch Handelnder in der ethischen Reflexion T2 - Informatik 2003 - Innovative Informatikanwendungen, Band 2 der Beiträge der 33. Jahrestagung der Gesellschaft für Informatik e.V. (GI), 29. September - 2. Oktober 2003 in Frankfurt am Main N2 - Ausgehend von einer Betrachtung des Einflusses von InformatikerInnen und ihren Handlungsmustern auf Arbeitsprozesse und vor dem Hintergrund einer kritischen Auseinandersetzung mit bisherigen berufsethischen Leitlinien wollen wir einen neuen Ansatz wagen, über Informatik und Verantwortung nachzudenken. Eine Rekonstruktion des Begriffs Verantwortung bietet uns ein reichhaltiges begriffliches Instrumentarium zur Reflexion des Verhältnisses von Verantwortung und informatischer Praxis. Wir plädieren dafür, dass informatisch Handelnde lernen müssen, ethische Probleme zu erkennen, implizite Annahmen von Arbeitskulturen zu durchschauen und ein Bewusstsein für die Veränderbarkeit dieser Arbeitskulturen entwickeln sollten. Zusätzlich bedarf es kollektiver und rechtlicher Veränderungen der Rahmenbedingungen für verantwortliches Handeln. Y1 - 2003 UR - https://dl.gi.de/handle/20.500.12116/29680 SP - 176 EP - 181 ER - TY - CHAP A1 - Käsbauer, Johannes A1 - Schmailzl, Anton A1 - Prehm, Jens A1 - Loose, Tobias A1 - Hierl, Stefan T1 - Simulation of Quasi-Simultaneous Laser Transmission Welding of Plastics BT - Optimization of Material Parameters in Broad Temperature Range T2 - Procedia CIRP N2 - Thermo-mechanical simulation offers great opportunities to optimize welding processes of plastics. For realistic simulation, the temperature dependent mechanical properties need to be implemented from ambient temperature to temperatures above the flow temperature. Standard test methods are insufficient for characterization in the entire temperature range because close to the flow temperature the material is too soft for tensile tests and too stiff for rheometry. Therefore, an optimization strategy is developed, that determines unknown material parameters by testing in welding simulations. The unknown parameters are iteratively adjusted to minimize the mismatch between computed and measured set-paths. Thus, important process characteristics are calculated realistically, enabling the computer aided assessment of the weld quality. KW - plastics welding KW - simulation KW - material modelling KW - optimization KW - parameterization KW - Kunststoffschweißen KW - Thermomechanische Eigenschaft KW - Simulation Y1 - 2020 U6 - https://doi.org/10.1016/j.procir.2020.09.136 VL - 94 SP - 737 EP - 741 PB - Elsevier ER - TY - CHAP A1 - Maiwald, Frederik A1 - Englmaier, Stephan A1 - Hierl, Stefan T1 - Online pyrometry for weld seam localization in absorber-free laser transmission welding of transparent polymers T2 - 21st International Symposium on Laser Precision Microfabrication: Dresden, 26.06.2020 N2 - Optical and medical devices made of transparent polymers are gaining popularity because of its cost advantages. The manufacturing technology must be able to meet the high demands of these applications. Advantages of laser transmission welding – contactless input of energy, precision, no adhesives and no particle formation – can be exploited here. For absorber-free welding, lasers emitting in the polymers‘ intrinsic absorption spectrum are used. Focusing the laser beam with high NA enables selective fusing of the joining zone. Since a molten upper surface leads to visible and palpable irregularities, the lateral expansion of the weld seam is monitored in this work. Welding tests with 1 mm thick plates of COC are performed and monitored by pyrometry. Distances between seam and surface measured in thin cuts and are compared with the pyrometer signal. This shows that the localization of the weld seam is possible and proper and faulty parts can be distinguished by pyrometry. KW - Laserdurchstrahlschweissen KW - Kunststoff KW - Transparenz KW - Schweißnaht KW - Wärmestrahlung KW - Pyrometrie KW - Prozessüberwachung Y1 - 2020 UR - http://www.jlps.gr.jp/en/proc/lpm/20/073.pdf PB - Japan Laser Processing Society ER - TY - CHAP A1 - Weber, Karsten ED - Schulz, W. K. T1 - Wissensarbeitsteilung in der Wissenschaftskommunikation T2 - Aspekte und Probleme der didaktischen Wissensstrukturierung Y1 - 1999 UR - https://www.researchgate.net/publication/263820155_Wissensarbeitsteilung_in_der_Wissenschaftskommunikation PB - Peter Lang CY - Frankfurt/Main ER - TY - CHAP A1 - Weber, Karsten ED - Aleksandrowicz, Dariusz ED - Ruß, H. T1 - Falsifizierbarkeit als Kriterium erfolgreicher interdisziplinärer Forschung T2 - Realismus - Disziplin - Interdisziplinarität Y1 - 2001 UR - https://www.researchgate.net/publication/263820381_Falsifizierbarkeit_als_Kriterium_erfolgreicher_interdisziplinarer_Forschung PB - Rodopi CY - Amsterdam, Atllanta ER - TY - CHAP A1 - Weber, Karsten ED - Weber, Karsten ED - Nagenborg, Michael ED - Spinner, Helmut F. T1 - Technikregime und (Gegen-)Information – Warum es nicht ausreicht, die "richtige" Architektur zu haben T2 - Wissensarten, Wissensordnung, Wissensregime. Beiträge zum Karlsruher Ansatz der integrierten Wissensforschung N2 - Glaubt man den Gazetten, so leben wir in einer Informations- bzw. in einer Wissensgesellschaft und nicht mehr in einer Agrar-, Industrie- oder Dienstleistungsgesellschaft. Letztere konnten jeweils daran erkannt werden, dass die Mehrheit der Beschäftigen entweder in der Landwirtschaft, in Industriebetrieben oder im Dienstleistungsgewerbe arbeiteten. Im Falle der Informations- bzw. Wissensgesellschaft ist es nicht so leicht, einen verlässlichen Indikator zu finden, der uns dazu berechtigen würde, bspw. im Falle der bundesrepublikanischen Gesellschaft eben von einer Informations- oder Wissensgesellschaft zu sprechen. Zwar ist der Anteil derer, die in Unternehmen der Informations- und Kommunikationstechnologie-Branche arbeiten, bezogen auf die Gesamtzahl der Beschäftigten in der Bundesrepublik Deutschland, nicht gering zu werten, doch die Mehrheit stellen sie kaum. Y1 - 2002 U6 - https://doi.org/10.1007/978-3-663-14883-8_8 PB - Leske+Budrich CY - Opladen ER - TY - CHAP A1 - Weber, Karsten ED - Capurro, Rafael ED - Hausmanninger, Thomas T1 - Grundlagen der Informationsethik BT - Politische Philosophie als Ausgangspunkt informationsethischer Reflexion T2 - Netzethik - Grundlegungsfragen der Internetethik Y1 - 2002 UR - https://www.researchgate.net/publication/263821719_Grundlagen_der_Informationsethik SP - 141 EP - 156 PB - Fink CY - München ER - TY - CHAP A1 - Weber, Karsten ED - Rötzer, Florian T1 - Gewalt und Medien, Gewalt durch Medien, Gewalt ohne Medien? T2 - Virtuelle Welten - reale Gewalt N2 - Der Amoklauf und Massenmord in Erfurt hat viele Auswirkungen. Neben dem unsäglichen Leid der direkt Betroffenen finden Medien und Politiker in den Ereignissen ein quotenträchtiges Thema. Was nicht verwundert, weil es lange eingeübten Regeln und Ritualen folgt, ist die schnelle Findung der letztlich Schuldigen: Film, Fernsehen, Musik, Computerspiele bzw. allgemeiner Gewaltinhalte der Medien. So liegt es wohl nahe, jene Inhalte aus dem Verkehr zu ziehen: durch Indizierung, durch Gesetze, durch technische Maßnahmen im Internet. Doch bei genauerem Hinschauen stellt sich die Frage, auf welcher Basis solche Schuldsprüche eigentlich aufbauen. Gibt es gesicherte Erkenntnisse über den Zusammenhang von Medien und Gewalt? Sind Maßnahmen, wie sie nun geplant werden, überhaupt wirksam? Können sie Gewalt verhindern? KW - Medien KW - Gewaltdarstellung KW - Jugend KW - Wirkung Y1 - 2003 UR - https://www.researchgate.net/publication/263820852_Gewalt_und_Medien_Gewalt_durch_Medien_Gewalt_ohne_Medien SP - 36 EP - 43 PB - Heise CY - Hannover ER - TY - JOUR A1 - Lauer, Norina T1 - Promotionsunterstützung in den Therapieberufen JF - Therapie Lernen KW - Promotion KW - Therapeut Y1 - 2020 VL - 9 IS - 9 SP - 122 PB - Ed. HarVe CY - Bremen ER - TY - JOUR A1 - Maiwald, Frederik A1 - Hierl, Stefan T1 - Pyrometerbasierte Prozessüberwachung beim Laserkunststoffschweißen JF - Photonik KW - Laserschweissen KW - Kunststoff KW - Prozessüberwachung KW - Pryrometer Y1 - 2020 IS - 52 SP - 22 EP - 25 PB - AT-Fachverl. CY - Fellbach ER - TY - JOUR A1 - Maiwald, Frederik A1 - Englmaier, Stephan A1 - Hierl, Stefan T1 - Online pyrometry for weld seam localization in absorber-free laser transmission welding of transparent polymers JF - Journal of Laser Micro/Nanoengineering N2 - Production of optical and medical devices makes high demands on cleanliness, precision, visual appearance and reliability. Advantages of laser transmission welding – contactless input of energy, high precision, no adhesives and no particle formation – can be fully exploited for this use. For absorber-free welding, lasers emitting in the polymers’ intrinsic absorption spectrum between 1.6 μm and 2 μm are used. Focusing the laser beam with high NA provides large intensity gradients inside the specimen and enables selective fusing of the joining zone without affecting the surface. Since a molten upper surface leads to visible and palpable irregularities and causes warpage, the verticalexpansion of the weld seam is crucial. To meet the high quality and reliability required in the medical and optical industry, online monitoring of the seam is necessary. The aim of this work is the localization and evaluation of the weld seam using pyrometry. First, the emitted thermal radiation is computed, enabling signal analysis regarding origin and spectrum. Thus, assessment of measurement spectrum and forecast of the signal in dependence on seam shape and position is possible. Finally, welding tests with Topas 8007-04 are performed at 200 mm/s feed rate and monitored with 100 kHz. The comparison of tracked data with thin-cuts demonstrates that weld seam localization by pyrometry is possible, enabling online assessment of the process. KW - Laserdurchstrahlschweissen KW - Kunststoff KW - Transparenz KW - Schweißnaht KW - Wärmestrahlung KW - Pyrometrie KW - Prozessüberwachung Y1 - 2021 U6 - https://doi.org/10.2961/jlmn.2021.01.2002 SN - 1880-0688 VL - Vol. 16 IS - 1 SP - 8 EP - 13 PB - Japan Laser Processing Society ER - TY - GEN A1 - Meussling-Sentpali, Annette T1 - "Perspektiven für Pflegekräfte im Hinblick auf ethische Fallbesprechungen" Vortrag beim Ethikrat des DiCV München am 2.12.2019 T2 - Vortrag beim Ethikrat des DiCV München am 2.12.2019 Y1 - 2019 ER - TY - CHAP A1 - Meussling-Sentpali, Annette T1 - "Wer pflegt in Zukunft?" T2 - Vortrag beim Altenpflegekongress Regensburg am 19.4.2018 Y1 - 2018 ER - TY - CHAP A1 - Meussling-Sentpali, Annette T1 - "Gender, Pflege und Technik" T2 - Vortrag und Workshop an der HS Landshut am 23.11.2017 Y1 - 2017 ER - TY - GEN A1 - Meussling-Sentpali, Annette T1 - "Vom Glauben und Pflegen" T2 - Kanzelrede in der Studierendengemeinde Regensburg am 13.11.2016 Y1 - 2016 ER - TY - CHAP A1 - Meussling-Sentpali, Annette T1 - "Sorge als Gegenstand von Pflege" T2 - Hauptvortrag beim Netzwerk Existenzielle Kommunikation und Spiritualität in der Pflege in Berlin am 14.6.2016 Y1 - 2016 ER - TY - JOUR A1 - Meussling-Sentpali, Annette T1 - "Medizin und Pflege 4.0" JF - Beitrag in der Mittelbayerischen Zeitung April 2017 Y1 - 2017 ER - TY - GEN A1 - Meussling-Sentpali, Annette T1 - "Pflege als heilsame Sorge für sich und den Anderen" T2 - Festvortrag zum Jubiläum im Caritasverband Augsburg am 17.6.2016 Y1 - 2016 ER - TY - GEN A1 - Meussling-Sentpali, Annette T1 - Ich rede gut über dich - Die Sprache(n) der Pflege – vom miteinander Reden und übereinander Denken T2 - Workshop beim Deutschen Katholischen Pflegekongress in Berlin am 27.3.2020 Y1 - 2020 ER - TY - CHAP A1 - Meussling-Sentpali, Annette T1 - "Zeichen der Veränderung – Die Sicht der Pflege" T2 - 5. Christlicher Gesundheitskongress 14.-16. April 2016 Y1 - 2016 ER - TY - GEN A1 - Meussling-Sentpali, Annette T1 - "Altenhilfe wohin?" Entwicklungen und Herausforderungen zwischen ambulant und stationär BT - Impulsvortrag bei Vorstand und Geschäftsführungen im Caritasverband München und Freising 10.2.2016 Y1 - 2016 ER - TY - JOUR A1 - Hellwig, Michael A1 - Bradshaw, Marco A1 - Schroll-Decker, Irmgard T1 - Evaluierung von nachhaltiger Wirksamkeit in der wissenschaftlichen Weiterbildung BT - Erfahrungen und Empfehlungen für die Weiterbildungspraxis aus dem Projekt OTH mind JF - ZHWB - Zeitschrift Hochschule und Weiterbildung N2 - Evaluationen können einen wichtigen Beitrag für die professionelle Entwicklung der wissenschaftlichen Weiterbildung leisten. Voraussetzung hierfür ist die Berücksichtigung von nachhaltiger Wirksamkeit als Evaluationsziel und Gegenstand, denn daraus lassen sich wichtige Informationen für das professionelle Handeln der Beteiligten am Weiterbildungsgeschehen ableiten. Der Beitrag greift Erfahrungen aus der begleitenden Evaluations- und Wirksamkeitsforschung im Projekt OTH mind auf. Anhand der Evaluationsstandards der Deutschen Gesellschaft für Evaluation (DeGEval-Standards) werden das Vorgehen und die ergriffenen Maßnahmen in Hinblick auf die Qualität der Planung und Durchführung bewertet. Insgesamt werden fünf zentrale Empfehlungen für die Evaluationspraxis formuliert: für (1) die Einbindung von Beteiligten im Evaluationsprozess, (2) eine Nutzenevaluation auf verschiedenen Ebenen, (3) Ziele und Gegenstände einer professionalisierungsbezogenen Evaluation, (4) eine zielbezogene Messung sowie (5) die Nutzung/Rückkopplung der Ergebnisse an Weiterbildungsverantwortliche. Weiterbildungspraktiker*innen an Hochschulen dienen die Empfehlungen als Impulse für eigene zukünftige Evaluationsanliegen. KW - Wissenschaftliche Weiterbildung KW - Evaluation KW - Nachhaltigkeit KW - OTH mind Y1 - 2020 U6 - https://doi.org/10.11576/zhwb-3391 IS - 2 SP - 59 EP - 67 PB - Deutsche Gesellschaft für wissenschaftliche Weiterbildung und Fernstudium e.V. (DGWF) ER - TY - JOUR A1 - Hellwig, Michael A1 - Schroll-Decker, Irmgard T1 - Wirksamkeit wissenschaftlicher Weiterbildung aus Sicht von Stakeholdern BT - Kriterien zur Erfolgsbestimmung und den wahrgenommenen Bedingungsfaktoren JF - ZHWB - Zeitschrift Hochschule und Weiterbildung N2 - Die Weiterbildung an Hochschulen ist an evidenzbasierten Daten interessiert, um Aussagen über die Wirksamkeit von eigenen Angeboten treffen zu können. Oftmals unklar ist, was unter Wirksamkeit verstanden werden kann und welche Voraussetzungen gegeben sein müssen, damit die Weiterbildungen Wirkung entfalten. Der Beitrag stellt eine Studie vor, die beide Aspekte adressiert und Aussagen unterschiedlicher Beteiligter am Weiterbildungsgeschehen wiedergibt. Angebotsseitig wurden Weiterbildungsverantwortliche sowie Lehrpersonen der Hochschule befragt. Nachfrageseitig wurden Teilnehmende berufsbegleitender Studiengänge und Unternehmensvertreter*innen aus ausgewählten Branchen einbezogen. Die erhobenen qualitativen Daten wurden inhaltsanalytisch analysiert und induktiv zu Kategorien zusammengefasst. Die Ergebnisse zeigen insgesamt fünf Oberkategorien auf, die die Wirksamkeit abbilden: (1) Erfolgreicher Praxistransfer; (2) Erwerb von Kenntnissen, Fähigkeiten und Kompetenzen; (3) Strategischer Nutzen; (4) Sozialer/kultureller Nutzen und (5) Resonanz der Teilnehmenden auf die wissenschaftliche Weiterbildung. Die Voraussetzungen lassen sich ebenfalls in fünf Kategorien abbilden: (a) teilnehmenden-, (b) unternehmens-, (c) angebots-, (d) hochschul- und (e) markt-/umfeldbezogene Faktoren. Im Beitrag werden nach der Darstellung der Studienergebnisse Schlussfolgerungen für die Weiterbildungspraxis in Hinblick auf die Themen Evaluation, Theorie-Praxis-Transfer und Marketing/Zielgruppenspezifische Kommunikation diskutiert. KW - Wissenschaftliche Weiterbildung KW - Nachhaltigkeit KW - Stakeholder Y1 - 2019 U6 - https://doi.org/10.4119/zhwb-2369 IS - 2 SP - 22 EP - 31 ER - TY - CHAP A1 - Dorschner, Stephan A1 - Meussling-Sentpali, Annette ED - Dorschner, Stephan ED - Meussling-Sentpali, Annette T1 - "Alles hat seine Zeit" - Aufbruch zu einem neuen Pflegeverständnis T2 - "Alles hat seine Zeit ..." - Aufbruch zu einem neuen Pflegeverständnis: Tagungsband zum 2. Christlichen Pflegekongress vom 30. Oktober bis 1. November in Bingen Y1 - 2009 SN - 978-3-9812008-3-6 SP - 187 EP - 207 PB - Jenaer Akademische Verlagsgesellschaft CY - Jena ER - TY - CHAP A1 - Dorschner, Stephan A1 - Meussling-Sentpali, Annette A1 - Schaefer, Iris ED - Stemmer, Renate T1 - "Wir tun unser Bestes..." - Pflegeprozess und Pflegequalität im subjektiven Erleben beruflich Pflegender T2 - Qualität in der Pflege - trotz knapper Ressourcen Y1 - 2009 SN - 978-3-89993-216-4 SP - 29 EP - 55 PB - Schlütersche CY - Hannover ER - TY - CHAP A1 - Dorschner, Stephan A1 - Meussling-Sentpali, Annette ED - Dorschner, Stephan ED - Meussling-Sentpali, Annette T1 - "Christlich pflegen in unserer Gesellschaft?" T2 - Elisabeth bewegt - Christen in der Pflege: Tagungsband zum 1. Christlichen Pflegekongress vom 30. Oktober bis 1. November 2007 in Eisenach Y1 - 2008 SN - 9783981200805 SP - 20 EP - 37 PB - Jenaer Akademische Verlagsgesellschaft CY - Jena ER - TY - RPRT A1 - Dorschner, Stephan A1 - Meussling-Sentpali, Annette T1 - Forschungs- und Entwicklungsprojekt Optimierung des Pflegeprozesses in der Pflegepraxis und der Pflegedokumentation BT - Zwischenbericht 1/2007 an die teilnehmenden Pflegeeinrichtungen Y1 - 2007 UR - https://docplayer.org/31102771-Forschungs-und-entwicklungsprojekt-optimierung-des-pflegeprozesses-in-der-pflegepraxis-und-der-pflegedokumentation.html CY - Jena ER - TY - BOOK A1 - Dorschner, Stephan A1 - Meussling-Sentpali, Annette T1 - Christlich pflegen. Eine Annäherung Y1 - 2007 SN - 9783981200812 PB - Jenaer Akademische Verlagsgesellschaft CY - Jena ER - TY - BOOK A1 - Rösl, Gerhard A1 - Seitz, Franz A1 - Tödter, Karl-Heinz T1 - Besser ohne Bargeld? – Gesamtwirtschaftliche Wohlfahrts-verluste der Bargeldabschaffung N2 - To broaden the operational scope of monetary policy, several authors suggest cash abolishment as an appropriate means of breaking through the zero lower bound. The key question in this respect is: What are the costs of such a proposal? We argue that the welfare costs of bypassing the zero lower bound can be dealt with analytically and empirically by assuming negative interest rates on cash holdings. Adopting a money-in-the-utility-function (MIU) model, we measure the welfare loss in terms of theamount needed to compensate consumers (compensated variation), and as excess burden (deadweight loss) imposed on the economy. Firstly, we gauge the welfare effects of abolishing cash, both, for the Euro area and for Germany, and we perform several robustness checks. Secondly, we broaden the analysis by taking into account the liquidity services of assets included in the monetary aggregates M1 and M3, and we contrast the results for the year 2015 with those for the pre-crisis period 2005. Our findings suggest that the welfare losses of negative interest rates incurred by consumers and society are large, notably if implemented in a low interest rate environment. Imposing a negative interest rate of 3 percent on cash holdings and reducing the interest on all assets included in M3 creates a deadweight loss of € 62bn for euro area and of €18bn for Germany. The annual compensation required by consumers in the euro area as well as in Germany is equivalent to 2.2 percent of GDP or about €700 per capita. Thus, stepping into deep negative interest rates turns out to be a very costly economic experiment, leaving aside the potential risks and negative side effects of protracted and intensified unconventional monetary policy. T3 - REGENSBURG PAPERS IN MANAGEMENT AND ECONOMICS - 1 KW - zero lower bound KW - cash abolishment KW - negative interest rates KW - welfare loss KW - compensated variation KW - deadweight loss Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7937 SN - 978-3-96256-000-3 CY - Regensburg ER - TY - BOOK A1 - Doll, Jens A1 - Rosenthal, Beatrice A1 - Volkenand, Jonas A1 - Hamella, Sandra T1 - Nowcasting des deutschen BIP N2 - Obgleich es zahlreiche Institutionen gibt, die das deutsche Bruttoinlandsprodukt vorhersagen, mangelt es aktuell an sogenannten „Nowcasting“-Modellen, deren Prognosegüte mit jedem neu verfügbaren, das deutsche Bruttoinlandsprodukt beeinflussenden Datenpunkt verbessert wird. In der folgenden Arbeit wird ein Konzept entwickelt und getestet, das auf Basis einer Bottom-up-Modellierung Nowcasting-Prognosen für das deutsche Bruttoinlandsprodukt ermöglicht. Hierbei bringt es mit der verwendeten Kombination von Modellen einen neuen Ansatz in die aktuelle Literatur des Nowcasting für das deutsche Bruttoinlandsprodukt ein. Durch die diversifizierte Vorhersage der einzelnen Komponenten ist neben einer verbesserten Prognosegüte ebenfalls eine dezidierte Interpretation des wirtschaftlichen Geschehens möglich. Das vorgestellte Prognosemodell zeigt in einem Pseudo Out of Sample Test eine gute Prognoseleistung im Vergleich zu Benchmark-Modellen und kann insbesondere in Krisenzeiten mit geringen Prognosefehlern überzeugen. T3 - REGENSBURG PAPERS IN MANAGEMENT AND ECONOMICS - 2 KW - Nowcasting KW - Bruttoinlandsprodukt KW - kurzfristige Konjunkturprognose KW - Wachstum KW - Bottom-up KW - Brückengleichungen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7947 SN - 978-3-96256-001-0 ER - TY - BOOK A1 - Landstorfer, Elke A1 - Groll, Thomas T1 - Sustainability in Business – What drives Corporate Social Responsibility? N2 - This article analyzes what drives companies to implement sustainable practices in business. A description of how sustainability affects business shall give an exemplified picture of sustainable corporate behavior. The term ‘sustainability’ is described. The approach of the three dimensions of sustainability shall serve as a basic understanding to evaluate the possibilities of an implementation of sustainability in business. The concepts of environmental management, sustainable management and Corporate Social Responsibility are described. The meaning of the driver ‘ethical responsibility’ in business is analyzed as a framework for Corporate Social Responsibility. This can be implemented in business through a code of ethics, for example. Studies and current findings confirm that Corporate Social Responsibility has become an evolving trend and is of growing importance in business today. Conclusively, the driver ‘ethical responsibility’ was found to motivate companies towards sustainable business practices. T3 - REGENSBURG PAPERS IN MANAGEMENT AND ECONOMICS - 3 KW - Sustainability KW - Corporate Social Responsibility KW - Ethical Responsibility Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7955 SN - 978-3-96256-002-7 CY - Regensburg ER - TY - BOOK A1 - Bauer, Theresa A1 - Groll, Thomas T1 - Digitalization of Collaboration and Communication in German SMEs BT - Using Design Thinking Methods to Develop Strategic Thrust for a Digital Transformation N2 - The effective use of digital technology and disruptive innovations are increasingly shaping the way companies survive in today’s markets. Consequently, the need for German Small and Medium Enterprises (SMEs) to perform a digital transformation, which implies the creation of a new business model through sophisticated technologies, is gaining significance for succeeding in the digital age. While most German SMEs have already accomplished a digitization of their collaboration and communication,a profound digital transformation is still imminent for the majority. Based on the investigation of existing literature on the subject, this paper demonstrates the suitability of design thinking methods to develop strategic thrust for a digital transformation. The key potential of design thinking is rooted in its ability to creatively solve problems and reinforce skills needed to address dynamic environments. An exemplary result of using design thinking to develop strategic thrust is presented with the fictional business model GreenCube. The concept aims to assist German SMEs in performing a digital transformation by simplifying the incorporation of sophisticated digital technologies and providing opportunities for networking and thus integrating into an ecosystem. Despite their potential, design thinking activities involve several challenges including the incongruence of pre-defined specifications and designed concepts, the gap between a focus on time-reduction and a focus on experimentation, and the lack of measurability of design thinking gains. Nevertheless, the nature of businesses’internal and external environment is becoming ever more fast-paced, making the ability to manage change increasingly critical for German SMEs to establish competitive advantage. T3 - REGENSBURG PAPERS IN MANAGEMENT AND ECONOMICS - 4 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7961 SN - 978-3-96256-003-4 CY - Regensburg ER - TY - BOOK A1 - Rösl, Gerhard A1 - Seitz, Franz T1 - SARS-Cov-2 und Bargeld: Wie ein Virus die weltweite Bargeldnachfrage fördert N2 - Wir zeigen, dass die gängige These, Bargeld würde wegen des zunehmenden Einsatzes elektronischer Zahlungsmittel generell immer stärker an Bedeutung verlieren, sowohl im weltweiten Maßstab als auch in den Emissionsländern der international nachfragten Sorten(USD, EUR,CHF, GBPund JPY) als klar widerlegt angesehen werden kann.Besonderes Augenmerk legen wir dabeiauf die Entwicklung der Bargeldnachfrage in Krisenphasen. Hierunterscheiden wir zwischen drei verschiedenen Typen von Krisen (technologische Krisen, Finanzmarktkrisen, Naturkatastrophen) und untersuchen jeweils die krisenbedingte Nachfrage nach großen und kleinen Denominationen von Banknotenseit 1990. Dabei zeigt sich als generelles Krisen-Charakteristikum, dassin derartigenunsicheren Zeiten die Bargeldnachfrage unabhängig von der speziellen Art der Krise immer ansteigt. Dahinterstehen sowohl Transaktions - als auch Hortungsmotive. Die völlig elastische Befriedigung dieser Nachfrage durch die Zentralbanken hilft die jeweilige Situation zu beruhigen und die Unsicherheit zu reduzieren. Vor diesem Hintergrund sind Forderungen nach der Abschaffung von Bargeld äußerst kritisch zu sehen. T3 - REGENSBURG PAPERS IN MANAGEMENT AND ECONOMICS - 5 KW - Bargeld KW - Banknoten KW - Krisen KW - Corona Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7979 SN - 978-3-96256-004-1 CY - Regensburg ER - TY - BOOK A1 - Secaida, Kristina T1 - Die Steuererklärung für Studierende - Eine Übersicht der aktuellen Rechtslage und Hilfestellung zur Erstellung N2 - Diese Arbeit verfolgt das Ziel, die aktuell geltende Rechtslage darzustellen und soll zusätzlich als Hilfestellung für die Erstellung von Steuererklärungen für Studierende dienen. Zunächst wird auf die Unterscheidung von Erst- und Zweitausbildung, sowie auf den damit verbundenen steuerlichen Ansatz eingegangen. Im weiteren Verlauf richtet sich der Fokus auf die im Rahmen eines Studiums typischerweise anfallen-den Aufwendungen und Einkünfte. Die aktuelle Gesetzeslage wird stets berücksichtigt. T3 - REGENSBURG PAPERS IN MANAGEMENT AND ECONOMICS - 6 KW - Student KW - Steuererklärung KW - Steuerrecht Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-7987 SN - 978-3-96256-005-8 CY - Regensburg ER - TY - CHAP A1 - Andersen, Michael Skipper A1 - de Zee, Mark A1 - Dendorfer, Sebastian A1 - MacWilliams, Bruce A1 - Rasmussen, John T1 - Validation of a detailed lower extremity model based on the Klein Horsman data set T2 - Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics (ISB 2009), July 2nd - 4th 2009, Cape Town, South Africa Y1 - 2009 SP - 27 EP - 28 ER - TY - CHAP A1 - Dendorfer, Sebastian A1 - Rasmussen, John T1 - The influence of in-vivo muscle forces on the stress distribution in a vertebral body during activities of daily living T2 - Eurospine Warsaw, Poland 2009 Y1 - 2009 ER - TY - CHAP A1 - Dendorfer, Sebastian A1 - Englert, Carsten T1 - Forces on a clavicles midshaft fracture and influence of fracture type T2 - AO Symposium, Regensburg, 2009 Y1 - 2009 ER - TY - CHAP A1 - Dendorfer, Sebastian A1 - Carbes, S. A1 - Rasmussen, John T1 - The influence of muscle forces on biomechanical fracture fixation simulations – from in-vivo forces to tissue strains T2 - World Congress on Medical Physics and Biomedical Engineering, 7 - 12, 2009, Munich Y1 - 2009 ER - TY - CHAP A1 - Robie, Bruce A1 - Rasmussen, John A1 - Christensen, Soeren Toerholm A1 - Dendorfer, Sebastian T1 - Herniation Induces 55% Increase in Load of Key Stabilizing Muscle – Impact on Herniation Treatment Devices? T2 - Spine Arthoplasty Society Meeting, New Orleans, 2010 Y1 - 2010 ER - TY - CHAP A1 - Dendorfer, Sebastian A1 - Rasmussen, John A1 - Christensen, Soeren Toerholm A1 - Robie, Bruce T1 - The Effect of Spinal Disc Herniation on Multifidus Muscles T2 - 56th Orthopaedic Research Society Meeting, New Orleans, USA, 2010 Y1 - 2010 UR - https://www.ors.org/Transactions/56/1487.pdf ER - TY - CHAP A1 - Englert, Carsten A1 - Müller, F. A1 - Dendorfer, Sebastian T1 - Einfluss der Muskelkräfte, des Bewegungsausmaßes und der Bruchform auf die Kraftübertragung des Implantat-Knochenverbundes am Beispiel der Claviculafraktur im mittleren Drittel T2 - 17. Jahreskongress der Deutschen Vereinigung für Schulter- und Ellenbogenchirurgie (DVSE), Rosenheim 2010 N2 - Fragestellung Es soll in dieser Computersimulationsstudie untersucht werden, wie der Osteosyntheseverbund Platte mit Schrauben im Verbund mit einer im mittleren Drittel gebrochenen Clavicula durch das Bewegungsausmaß in vivo belastet ist. Was sind die grundlegenden Kräfte die auf Clavicula und Implantat wirken und welchen Einfl uss hat die Bruchform. Methodik Die Muskel- und Gelenkkräfte sowie die Belastung des Implantatverbundes wurden mit einer muskuloskelletalen Simulationssoftware (AnyBody Technology, V.4) berechnet. Hierfür wurden mit einem komplexen Model des menschlichen Körpers folgende Bewegungen analysiert: eine Flexion von 160° und Abduktion 160° mit einem Gewicht von 2 kg in der Hand. Aus CT-Patientendaten wurden zwei dreidimensionale Modelle des Clavicula-Implantat Verbundes gebildet, die sich in der Frakturform unterscheiden (Querfraktur und vertikale Fraktur). In beiden Modellen wurde eine Claviculaosteosynthese in superiorer Position mit einer 6 Loch LCP mit 2 Schrauben pro Hauptfragment verwendet. Die Materialeigenschaften wurden aus der Dichte des Materials sowie aus Literaturdaten verwendet. Die Muskel- und Gelenkkräfte aus der muskuloskelletalen Berechnung wurden auf das Finite Elemente Modell übertragen und die Spannungen und Dehnungen des Implantat-Knochenverbundes wurden berechnet. Ergebnisse Es zeigte sich, dass die simulierte in vivo Belastung stark abhängig vom Flexionswinkel ist. Das Implantat ist in der superioren Lage auf Biegung belastet, welche maximale Werte im Überschulterniveau erreicht. Die Bruchform mit anatomischer Reposition und Kontakt der Hauptfragmente zueinander führt zu einer deutlichen Entlastung des Osteosyntheseverbundes im Vergleich zu einer Bruchform mit vertikaler Fraktur. Schlussfolgerung Aus den Analysen ist eine Positionierung der Plattenosteosynthese für die im mittleren Drittel frakturierte Clavicula in anterior-superiorer Lage wünschenswert. Die anatomische Reposition entlastet den Osteosyntheseverbund und sollte möglichst erreicht werden. Die Nachbehandlung sollte ein Bewegungsausmaß für den Arm für 4 Wochen für einfache Bruchformen auf 70° Flexion und Abduktion limitieren und für komplexe Bruchformen diese Limitierung ausgedehnt werden. Y1 - 2010 ER - TY - CHAP A1 - Horner, Marc A1 - Dendorfer, Sebastian A1 - Kiis, Arne A1 - Lawrenchuk, Mike A1 - Verma, Gunjan T1 - A Patient based simulation workflow for orthopedic device design and analysis T2 - SBC Ortho Workshop, June 2011 Y1 - 2011 ER - TY - CHAP A1 - Robie, Bruce A1 - Dendorfer, Sebastian A1 - Rasmussen, John A1 - Christensen, Soeren Toerholm T1 - Axial Rotation Requires Greatest Load in Multifidus Muscle – Potential Association with Low Back Pain? T2 - Annual Meeting of the AANS/CNS Section on Disorders of the Spine and Peripheral Nerves, 2011, Phoenix, Arizona Y1 - 2011 UR - https://paperpile.com/shared/o0LQEG ER - TY - CHAP A1 - Rasmussen, John A1 - Bichler, R. A1 - Christensen, Soeren Toerholm A1 - Wirix-Speetjens, Roel A1 - Dendorfer, Sebastian A1 - Renkawitz, Tobias T1 - Subject-specific Musculoskeletal Simulation of Hip Dislocation Risk in Activities of Daily Living T2 - Proceedings of the 2011 ORS Annual Meeting, Long Beach, CA. Y1 - 2011 UR - http://www.ors.org/Transactions/57/0306.pdf IS - Paper No. 306 ER - TY - CHAP A1 - Galibarov, Pavel E. A1 - Dendorfer, Sebastian A1 - Christensen, Soeren Toerholm T1 - On modelling spine curvature dependent on muscular and external forces in multibody dynamics system T2 - International Society of Biomechanics (ISB), 13th congress, 2011, Brussels, Belgium N2 - This paper presents a computational approach for investigating effect of muscular and external forces on curvature of the lumbar spine. Multibody dynamics system is used to compute the lumbar spine curvature using a force-dependent kinematics facility, e.g. this method allows releasing some degrees of freedom in order to be computed based on the current load configuration. Y1 - 2011 UR - https://paperpile.com/shared/63VCBY/download/2608c6d1-adef-0330-86f8-7996e623c627 SP - 2 ER - TY - CHAP A1 - Galibarov, Pavel E. A1 - Al-Munajjed, Amir Andreas A1 - Dendorfer, Sebastian A1 - Christensen, Soeren Toerholm A1 - Rasmussen, John T1 - The effect of varying the stiffness of spinal fusion devices on the adjacent levels using multibody dynamics simulation T2 - Orthopaedic Proceedings N2 - INTRODUCTION Several clinical studies demonstrated long-term adjacent-level effects after implantation of spinal fusion devices[1]. These effects have been reported as adjacent joint degeneration and the development of new symptoms correlating with adjacent segment degeneration[2] and the trend has therefore gone to motion preservation devices; however, these effects have not been understood very well and have not been investigated thoroughly[3]. The aim of this study is to investigate the effect of varying the stiffness of spinal fusion devices on the adjacent vertebral levels. Disc forces, moments and facet joint forces were analyzed. METHODS The AnyBody Modeling System was used to compute the in-vivo muscle and joint reaction forces of a musculoskeletal model. The full body model used in this study consists of 188 muscle fascicles in the lumbar spine and more than 1000 individual muscle branches in total. The model has been proposed by de Zee et al.[3], validated by Rasmussen et al.[4] and by Galibarov et al.[5]. The new model[5] determines the individual motions between vertebrae based on the equilibrium between forces acting on the vertebrae from muscles and joints and the passive stiffness in disks and ligaments, figure 1a. An adult of 1.75 m and 75 kg with a spinal implant in L4L5 was modeled. This model was subjected to a flexion-extension motion using different elastic moduli to analyze and compare to a non-implanted scenario. The analyzed variables were vertebral motion, the disc reaction forces and moments, as well as facet joint forces in the treated and the adjacent levels: L2L3, L3L4, L4L5 and L5-Sacrum. RESULTS When introducing a spinal fusion device in the L4L5 joint the reaction forces and moments decreased in this joint with stiffer devices leading to lower joint loads. However, in the adjacent joints, L3L4 and L5Sacrum, an increase was observed when implanting stiffer devices. Similar trends could be found for the L2L3 joint. The loads in the facet joints showed the same trends. While introducing a spinal fusion device reduced the facet joint forces in the treated joint, the loads in the adjacent facet joints were increased according to the stiffness of the implanted device, figure 1b. DISCUSSION While the treated disc joint showed reduced motion and loads, the adjacent levels demonstrated a significant increase. In particular, the increased facet joint forces in the adjacent levels can lead to adjacent level facet pain or accelerated facet joint degeneration. Introducing a device resulted in preventing facet contact and therefore facet joint loads, even using the device with the lowest stiffness. CONCLUSION The presented model shows that clinical complications such as facet joint degeneration in adjacent levels after implantation of spinal fusion device are consistent with the change in the mechanical-stimulus distribution in the system. Y1 - 2011 VL - 94-B IS - SUPP_XL01 Sep 2012 SP - 2 ER - TY - CHAP A1 - Galibarov, Pavel E. A1 - Dendorfer, Sebastian A1 - Rasmussen, John T1 - Two Computational Models of the Lumbar Spine: BT - Comparison and Validation T2 - Proceedings of the 2011 ORS Annual Meeting, Long Beach, CA, vol. Marie Curie Initial Training Network "SpineFX" Y1 - 2011 UR - http://www.ors.org/Transactions/57/0786.pdf ER - TY - CHAP A1 - Putzer, Michael A1 - Weber, Tim A1 - Dendorfer, Sebastian T1 - Design studies on hip prosthesis using patient specific data T2 - Simpleware Users meeting, November 9th 2011, Bristol, UK Y1 - 2011 ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Renkawitz, Tobias A1 - Dullien, Silvia A1 - Grifka, Joachim T1 - Clinical gait analysis combined with musculoskeletal modelling – coding a new generation of evaluation instruments T2 - Deutsche Gesellschaft für Biomechanik, Murnau, 2011 Y1 - 2011 ER - TY - CHAP A1 - Dendorfer, Sebastian T1 - The effect of multifidus muscles atrophy following disc herniation on disc loading T2 - Deutsche Gesellschaft für Biomechanik, Murnau, 2011 Y1 - 2011 ER - TY - CHAP A1 - Spreiter, G. A1 - Galibarov, Pavel E. A1 - Dendorfer, Sebastian A1 - Ferguson, Stephen J. T1 - Influence of kyphosis on spinal loading T2 - 10th International Symposium Computer Methods in Biomechanics and Biomedical Engineering (CMBBE) Meeting, 11. - 14. April 2012, Berlin Y1 - 2012 ER - TY - CHAP A1 - Weber, Tim A1 - Stezowski, P. A1 - Dullien, Silvia A1 - Dendorfer, Sebastian T1 - Eine biomechanische Bewertung verschiedener Belastungsszenarios nach der Implantierung einer Hüft-Totalendoprothese T2 - 89. Jahrestagung der Vereinigung der Bayerischen Chirurgen e.V., 25. - 27. Juli 2012, Regensburg T2 - A biomechanical evaluation of different load scenarios after implantation of a total hip replacement Y1 - 2012 ER - TY - JOUR A1 - Weber, Tim A1 - Dullien, Silvia A1 - Grifka, Joachim A1 - Renkawitz, Tobias A1 - Dendorfer, Sebastian T1 - Validation of a Motion Capture Laboratory and a new marker-placement protcol for clinical applications JF - Gait & Posture Y1 - 2013 U6 - https://doi.org/10.1016/j.gaitpost.2013.07.229 VL - 38 IS - Suppl. 1 SP - 113 EP - 114 ER - TY - CHAP A1 - Weber, Tim A1 - Stezowski, P. A1 - Dullien, Silvia A1 - Putzer, Michael A1 - Dendorfer, Sebastian T1 - Eine biomechanische Bewertung verschiedener Belastungsszenarien nach Implantierung einer Hüft-Totalendoprothese T2 - GAMMA Workshop, Hannover, 2012 Y1 - 2012 ER - TY - CHAP A1 - Weber, Tim A1 - Dullien, Silvia A1 - Putzer, Michael A1 - Dendorfer, Sebastian A1 - Renkawitz, Tobias T1 - Biomechanical outcome after computer-assisted vs. conventional THR – study concept and preliminary gait analysis results T2 - GAMMA Workshop, Hannover, 2012 Y1 - 2012 ER - TY - CHAP A1 - Putzer, Michael A1 - Galibarov, Pavel E. A1 - Dendorfer, Sebastian T1 - Influence of vertebral parameters on lumbar spine loading T2 - Pre-meeting SpineFX, Eurospine 2013, Liverpool, UK Y1 - 2013 ER - TY - CHAP A1 - Dendorfer, Sebastian T1 - Einführung in die Mechanik T2 - Biomechanik Workshop, Klinikum Bad Abbach, Nov. 2013 Y1 - 2013 ER - TY - CHAP A1 - Dendorfer, Sebastian A1 - Penzkofer, Rainer T1 - Experimentelle Untersuchung der Belastungen im Kopf beim Treten T2 - Fachsymposium "Treten gegen den Kopf", April 2013, Nürnberg Y1 - 2013 ER - TY - CHAP A1 - Dendorfer, Sebastian T1 - Innovationen in der Medizintechnik T2 - Oberpfalztag Weiherhammer, Nov. 2013 Y1 - 2013 ER - TY - CHAP A1 - Putzer, Michael A1 - Penzkofer, Rainer A1 - Ehrlich, Ingo A1 - Rasmussen, John A1 - Gebbeken, Norbert A1 - Dendorfer, Sebastian T1 - Musculoskeletal simulations to investigate the influence of vertebral geometrical parameters on lumbar spine loading T2 - 7th World Congress of Biomechanics, Boston, United States, 04/07/14 -11/07/14 Y1 - 2014 ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Bulstra, Sjoerd K. A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias T1 - Biomechanical Outcome after computer-assisted vs. Conventional THR T2 - ANSYS Conference & 32th CADFEM Users' Meeting 2014, 04.-06. Juni, Nürnberg Y1 - 2014 UR - https://www.researchgate.net/publication/264547774_Biomechanical_outcome_after_computer-assisted_vs_conventional_THR ER - TY - CHAP A1 - Al-Munajjed, Amir Andreas A1 - Nolte, Daniel A1 - Rasmussen, John A1 - Dendorfer, Sebastian T1 - Force distribution in the foot during braking – a musculoskeletal approach T2 - Human Modeling Symposium 2014, Munich, Germany N2 - High loads can appear in the individual joints of the human foot while the driver uses the pedals, in particular, during breaking. Measuring these internal forces is very difficult or almost impossible; therefore, advanced models are necessary to perform musculoskeletal simulations. The objective of this investigation was to see what loads are acting in the individual foot joints from the phalanges to calcaneus and talus during different brake scenarios. The Glasgow-Maastricht AnyBody Foot Model with 26 separate segments, connected by joints, ligaments and muscles was used inside the AnyBody Modeling System to compute individual mid foot joint loads. The amount, the direction of the force and additionally also the load insertion point was varied for several simulations. Figure 1: Seated musculoskeletal body model with applied brake force and forces for the lateral, intermediate and medial cuneiform-navicular joint for two different brake forces. The simulation showed that for the different brake scenarios, different muscles will be activated in the human and therefore different loads are apply in the fore-and mid-foot, respectively. The torso of the subject was assumed to be fixed in the seat. Further studies are ongoing to simulate the seat as an elastic element that allows different H-point locations according to the different loadings in the foot from the brake pedal using a new inverse dynamics analysis method called force-dependent kinematics. Y1 - 2014 UR - https://www.researchgate.net/publication/281229902_Force_distribution_in_the_foot_during_braking_-a_musculoskeletal_approach ER - TY - CHAP A1 - Striegl, B. A1 - Kujat, Richard A1 - Dendorfer, Sebastian T1 - Quantitative analysis of cartilage surface by confocal laser scanning microscopy T2 - Biomedizinische Technik Y1 - 2014 U6 - https://doi.org/10.1515/bmt-2014-4012 VL - 59 IS - s1-A SP - 24 ER - TY - CHAP A1 - Dendorfer, Sebastian T1 - Mechanobiology – Impact on regeneration and degradation T2 - Translations in Regenerative Medicine, TIRM and FIFA Symposium, Regensburg, 2015 Y1 - 2015 ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Bulstra, Sjoerd K. A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias T1 - Musculoskeletal modeling for orthopedic surgery – Applications and chances T2 - Orthopedics meets Engineering, Regensburg, 2015 Y1 - 2015 ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Bulstra, Sjoerd K. A1 - Grifka, Joachim A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tim T1 - Navigated Femur First Total Hip Arthroplasty leads to improved Biomechanical Outcome after surgery T2 - ORS annual meeting, Las Vegas, USA, 2015 Y1 - 2015 ER - TY - CHAP A1 - Süß, Franz A1 - Putzer, Michael A1 - Dendorfer, Sebastian T1 - Numerische und experimentelle Untersuchungen an der Wirbelsäule T2 - Forschungssymposium Bad Abbach, Germany, 2015 Y1 - 2015 ER - TY - CHAP A1 - Billing, A. A1 - Götz, J. A1 - Weber, Tim A1 - Dendorfer, Sebastian T1 - Positionsanalyse von winkelstabilen Plattenosteosynthesesystemen zur Versorgung von Metatarsalfrakturen mit Hilfe von patientenspezifischen biomechanischen Modellen T2 - Vereinigung Süddeutscher Orthopäden und Unfallchirurgen Jahrestagung 2015, Baden-Baden, Germany Y1 - 2015 ER - TY - CHAP A1 - Putzer, Michael A1 - Dendorfer, Sebastian T1 - Sensitivity of lumbar spine loading to anatomical parameters T2 - International Workshop on Spine Loading and Deformation: From Loading to Recovery, 2-4 July 2015, Julius Wolff Institute, Charité-Universitatsmedizin Berlin, Germany Y1 - 2015 ER - TY - CHAP A1 - Ignasiak, Dominika A1 - Dendorfer, Sebastian A1 - Ferguson, Stephen J. T1 - Thoracolumbar spine model with articulated rigcage for the prediction of dynamic spinal loading T2 - International Workshop on Spine Loading and Deformation: From Loading to Recovery, 2-4 July 2015, Julius Wolff Institute, Charité-Universitatsmedizin Berlin, Germany Y1 - 2015 ER - TY - CHAP A1 - Weber, Tim A1 - Renkawitz, Tobias A1 - Bulstra, Sjoerd K. A1 - Grifka, Joachim A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian T1 - Biomechanics of computer-assisted vs. conventional THR after one year follow up T2 - XXV Congress of the International Society of Biomechanics, Glasgow, UK, 12th-16th July 2015 Y1 - 2015 ER - TY - CHAP A1 - Penzkofer, Rainer A1 - Grechenig, S. A1 - Kujat, Richard A1 - Angele, Peter A1 - Dendorfer, Sebastian T1 - Biomechanical comparison of the dorsal femur condyles and the iliac crest in terms of failure behavior T2 - XXV Congress of the International Society of Biomechanics, Glasgow, UK, 12th-16th July 2015 Y1 - 2015 ER - TY - CHAP A1 - Weber, Tim A1 - Renkawitz, Tobias A1 - Grifka, Joachim A1 - Bulstra, Sjoerd K. A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian T1 - The musculoskeletal load scenario of computer-assisted Femur-First THR up to one year after surgery T2 - VI International Conference on Computational Bioengineering, Barcelona, Sept. 2015 Y1 - 2015 UR - https://www.researchgate.net/publication/281745827_The_musculoskeletal_load_scenario_of_computer-assisted_Femur-First_THR_up_to_one_year_after_surgery ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Grifka, Joachim A1 - Weber, Markus A1 - Wörner, Michael A1 - Dullien, Silvia A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias T1 - Verbessert die computerassistierte Femur First Operationstechnik für die Hüftendoprothetik den muskuloskelettalen Lastfall auf das Hüftgelenk? T2 - DKOU 2015, Deutscher Kongress für Orthopädie und Unfallchirurgie 2015 Y1 - 2015 UR - https://www.researchgate.net/publication/283259007_Verbessert_die_computerassistierte_Femur_First_Operationstechnik_fur_die_Huftendoprothetik_den_muskuloskelettalen_Lastfall_auf_das_Huftgelenk ER - TY - CHAP A1 - Dendorfer, Sebastian T1 - Biomechanik des Alterns T2 - Kolpingfortbildung Lambach, April 2016 Y1 - 2016 ER - TY - CHAP A1 - Dendorfer, Sebastian T1 - Virtuelle Menschmodelle – von der Bewegung zur Belastung T2 - Medbo Bezirksklinikum Regensburg, April 2016 Y1 - 2016 ER - TY - CHAP A1 - Gross, Simon A1 - Süß, Franz A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian T1 - Simulating fatigue in musculoskeletal models using surface electromyography, ECCOMAS Congress, Crete, Greece, 201 T2 - ECCOMAS Congress, Crete, Greece, 2016 Y1 - 2016 ER - TY - JOUR A1 - Dendorfer, Sebastian T1 - Älterwerden muss auch mal wehtun! JF - Gesunde Hochschule, OTH Regensburg, 4.7.2016 Y1 - 2016 ER - TY - CHAP A1 - Süß, Franz A1 - Kubowitsch, Simone A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian T1 - The influence of stress on spinal loading T2 - ESEM webconference, Dez. 2017 Y1 - 2016 ER - TY - CHAP A1 - Muehling, M. A1 - Englert, Carsten A1 - Dendorfer, Sebastian T1 - Influence of biceps tenotomy and tenodesis on post-operative shoulder strength T2 - Jahrestagung der Deutschen Gesellschaft für Biomechanik, March 2017, Hannover, Germany Y1 - 2017 ER - TY - CHAP A1 - Kubowitsch, Simone A1 - Süß, Franz A1 - Jansen, Petra A1 - Dendorfer, Sebastian T1 - Muscular imbalances during experimentally induced stress T2 - 23th Congress of the European Society of Biomechanics, Sevilla, Spain, 2017 Y1 - 2017 ER - TY - CHAP A1 - Süß, Franz A1 - Kubowitsch, Simone A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian T1 - The influence of mental stress on spinal disc loading and muscle activity T2 - 23th Congress of the European Society of Biomechanics, Sevilla, Spain, 2017 Y1 - 2017 ER - TY - CHAP A1 - Gross, Simon A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian T1 - Investigation of external load dependent static and dynamic muscle fatigue T2 - 23th Congress of the European Society of Biomechanics, Sevilla, Spain, 2017 Y1 - 2017 ER - TY - JOUR A1 - Klotz, Stefan A1 - Kopper, Andreas A1 - Westner, Markus A1 - Strahringer, Susanne T1 - Von Schatten-IT zu Business-managed IT: Fachbereichs-IT gezielt gestalten JF - Wirtschaftsinformatik & Management N2 - Fachbereichs-IT, Schatten-IT, Business-managed IT. All diese Begriffe beschreiben IT, die neben den eigentlichen, regulären IT-Systemen oder -Prozessen in Unternehmen existieren und von Mitarbeiterinnen und Mitarbeitern der Fachbereiche genutzt werden. Im Fall von„Schatten-IT“ handelt es sich um IT-Systeme und -Prozesse (IT-Instanzen), die sich ohne Kenntnis der IT-Verantwortlichen etabliert haben; im Fall von„Business-managed IT“ entstehen die IT-Systeme und -Prozesse in Kenntnis der bzw. in Abstimmung mit den IT-Verantwortlichen im Unternehmen.„Fachbereichs-IT“ subsumiert Schatten-IT und Business-managed IT. Welche Ursachen führen zu solchen IT-Instanzen, welche Potenziale und Risiken haben diese IT-Instanzen und wie lassen sie sich steuern? KW - Business-managed IT KW - Fachbereichs IT KW - IT Governance KW - Schatten IT KW - Shadow IT Y1 - 2022 U6 - https://doi.org/10.1365/s35764-022-00421-7 SN - 1867-5913 SN - 1867-5905 VL - 14 IS - 4 SP - 282 EP - 287 PB - Springer Nature ER - TY - CHAP A1 - Pilling, A. A1 - Süß, Franz A1 - Kubowitsch, Simone A1 - Dendorfer, Sebastian T1 - Experimental workflow for determining psychological stress from physiological biosignals T2 - Jahrestagung der BIOMEDIZINISCHEN TECHNIK und Dreiländertagung der MEDIZINISCHEN PHYSIK, Dresden, Germany, 2017 Y1 - 2017 ER - TY - CHAP A1 - Jungtäubl, Dominik A1 - Aurbach, Maximilian A1 - Melzner, Maximilian A1 - Spicka, Jan A1 - Süß, Franz A1 - Dendorfer, Sebastian T1 - EMG-Based Validation of Musculoskeletal Models Considering Crosstalk T2 - International Conference BIOMDLORE, June 28 - 30 2018, Białystok, Poland N2 - BACKGROUND: Validation and verification of multibody musculoskeletal models sEMG is a difficult process because of the reliability of sEMG data and the complex relationship of muscle force and sEMG. OBJECTIVE: This work aims at comparing experimentally recorded and simulated muscle activities considering a numerical model for crosstalk. METHODS: For providing an experimentally derived reference data set, subjects were performing elevations of the arm, where the activities of the contemplated muscle groups were measured by sEMG sensors. Computed muscle activities were further processed and transformed into an artificial electromyographical signal, which includes a numerical crosstalk model. In order to determine whether the crosstalk model provides a better agreement with the measured muscle activities, the Pearson correlation coefficient has been computed as a qualitative way of assessing the curve progression of the data sets. RESULTS: The results show an improvement in the correlation coefficient between the experimental data and the simulated muscle activities when taking crosstalk into account. CONCLUSIONS: Although the correlation coefficient increased when the crosstalk model was utilized, it is questionable if the discretization of both, the crosstalk and the musculoskeletal model, is accurate enough. KW - musculoskeletal modeling KW - validation KW - surface electromyography KW - crosstalk Y1 - 2018 U6 - https://doi.org/10.1109/BIOMDLORE.2018.8467211 ER -