TY - CHAP A1 - Ławrowski, Robert Damian A1 - Schreiner, Rupert A1 - Linghu, Shuangyi A1 - Gu, Fuxing T1 - Field Emission Behaviour of Single-Crystal Pd Nanowires T2 - 33rd International Vacuum Nanoelectronics Conference (IVNC): 6-10 July 2020, Lyon, France N2 - Single-crystal Pd nanowires with typically 100 nm diameters and lengths from several micrometers to tens of micrometers were grown on Al 2 O 3 substrates in a furnace with Ar atmosphere. Integral field emission measurements of such samples after Pd coating (~10 nm) were performed in a diode configuration with a 50 μm mica spacer in a vacuum chamber at pressures of about 10 -9 mbar. The IV measurement of the sample shows an integral emission current up to 2 μA at a voltage of 500 V (10 MV/m) and an onset voltage for a current of 1 nA of about 275 V. The corresponding Fowler-Nordheim plot show a linear behavior, like expected for a metal needle. Y1 - 2020 SN - 978-1-7281-9454-7 U6 - https://doi.org/10.1109/IVNC49440.2020.9203510 SP - 1 EP - 2 PB - IEEE ER - TY - CHAP A1 - Ławrowski, Robert Damian A1 - Hausladen, Matthias A1 - Schreiner, Rupert T1 - Individually Addressable Fully Integrated Field Emission Electron Source Fabricated by Laser Micromachining of Silicon T2 - 33rd International Vacuum Nanoelectronics Conference (IVNC): 6-10 July 2020, Lyon N2 - A cathode with individually addressable Si tips allows the observation of the activation procedure and emission behaviour of each field emission emitter at any time of the measurement. The cathode consists of an array of 2x2 conically shaped emitter structures, which were fabricated by laser micromachining and wet etching of a Si substrate bonded on a glass carrier. Using the same process, a Si extractions grid was fabricated and mounted onto the emitter. Integral field emission measurements were performed in a diode configuration in a vacuum chamber at pressures of about 10- 9 mbar. The emitters show an onset voltage between 200 V and 300 V. The emission current for each emitter on the cathode was regulated to a given value (1.0 μA, 2.5μA, 5.0μA) by an external regulating circuit and was recorded individually during the measurement. With such approach, the relation between the emission behaviour and the geometry of emitters can be studied in detail. In addition, the current stabilization of each emitters of an array can be investigated, which led to a current stability of better than 0.5%. Y1 - 2020 SN - 978-1-7281-9454-7 U6 - https://doi.org/10.1109/IVNC49440.2020.9203470 SP - 1 EP - 2 PB - IEEE ER - TY - GEN A1 - Düsberg, Felix A1 - Bachmann, Michael A1 - Edler, Simon A1 - Pahlke, Andreas A1 - Langer, Christoph A1 - Prommesberger, Christian A1 - Schreiner, Rupert A1 - Bunert, Erik A1 - Wendt, Cornelius A1 - Zimmermann, Stefan T1 - Novel Non-Radiative Electron Source T2 - 43rd International Symposium of Capillary Chromatography & 16h GC x GC Symposium 2019 N2 - Recently a non-radioactive electron capture detector based on a thermionic electron emitter has been demonstrated [1]. Using field emitter arrays (FEAs) would yield non-radioactive portable low power devices with fast switching capability. By combining FEAs with a vacuum-sealed housing and an electron transparent membrane window, such electron sources can be operated in an ambient pressure environment. Y1 - 2019 ER - TY - JOUR A1 - Langer, Christoph A1 - Prommesberger, Christian A1 - Ławrowski, Robert Damian A1 - Schreiner, Rupert A1 - Serbun, Pavel A1 - Müller, Günter A1 - Düsberg, Felix A1 - Hofmann, Martin A1 - Bachmann, Michael A1 - Pahlke, Andreas T1 - Field emission properties of p-type black silicon on pillar structures JF - Journal of Vacuum Science & Technology B N2 - Arrays of black silicon field emission pillar structures were fabricated on p-type silicon substrates. Two types of samples with the same number of pillars (arrays of 10 × 10) but different pillar heights (8 and 20 μm) were prepared as well as a black silicon reference sample without pillars. The field emission properties of these cathodes were investigated both by means of integral current-voltage measurements and by field emission scanning microscopy. Samples with a pillar height of 20 μm revealed onset fields as low as 6.4 V/μm, field enhancement factors up to 800, and emission currents up to 8 μA at an applied field of 20 V/μm. Due to the p-type material, a saturation of the emission current for fields above 11 V/μm was observed. This saturation leads to a stable operation with a current fluctuation of less than ±8%. It was found that samples with a pillar height of 20 μm showed improved emission characteristics compared to samples with a pillar height of 8 μm or without pillars. The voltage maps revealed an increased emission homogeneity after a “burn-in” sequence of the sample. The current map showed that a few of the pillars dominate the emission. Integral current stability measurements were performed under different vacuum pressures, in order to investigate altered emission behavior and a potential degradation of the emitters. At pressures above 10−6 mbar, the sample starts to degrade irreversibly. Nevertheless, even after a harsh treatment over 30 min at 5 × 10−5 mbar and at an applied field of 23 V/μm, the cathode was still operating, and did not fail during further operation over 20 h at 5 × 10−8 mbar and at an applied field of 28 V/μm. Y1 - 2016 U6 - https://doi.org/10.1116/1.4943919 VL - 34 IS - 2 ER - TY - JOUR A1 - Mingels, Stephan A1 - Porshyn, Vitali A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Schreiner, Rupert A1 - Lützenkirchen-Hecht, Dirk A1 - Müller, Günter T1 - Photosensitivity of p-type black Si field emitter arrays JF - Journal of Applied Physics N2 - We have investigated the properties of black Si field emitter arrays under strong electric fields and laser illumination. A low onset field of 1.8 MV/m for an emission current of 1 nA was obtained. A pronounced saturation region of the dark and photo-enhanced current was observed, which provided a short-term stability of 0.1% at 0.4 μA and 0.7% at 1.0 μA, respectively. As maximum value for the photosensitivity, an on-off current switching ratio of 43 reaching about 13 μA was achieved at a laser power of 15 mW. Electron spectra in the dark and under laser illumination are presented, showing a current and light-sensitive voltage drop across the emitters as well as hints for hot electron emission. Y1 - 2016 U6 - https://doi.org/10.1063/1.4948328 VL - 119 IS - 16 ER - TY - JOUR A1 - Bachmann, Michael A1 - Dams, Florian A1 - Düsberg, Felix A1 - Hofmann, Martin A1 - Pahlke, Andreas A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Prommesberger, Christian A1 - Schreiner, Rupert A1 - Serbun, Pavel A1 - Lützenkirchen-Hecht, Dirk A1 - Müller, Günter T1 - Extraction of the characteristics of current-limiting elements from field emission measurement data JF - Journal of Vacuum Science & Technology B N2 - In this contribution, the authors will present an algorithm to extract the characteristics of nonideal field emission circuit elements from saturation-limited field emission measurement data. The method for calculating the voltage drop on current-limiting circuit elements is based on circuit theory as well as Newton's method. Since the only assumption the authors make on the current-limiting circuit is a connection in series, this method is applicable to most field emission data showing saturation. To be able to determine the significance of any parameter output, the uncertainties of data and extracted parameters as well as the parameter correlations are fully taken into account throughout the algorithm. N-type silicon samples with varying external serial resistors are analyzed. All results show a good agreement to the nominal resistor values. Additionally, several p-type samples are analyzed, showing a diodelike behavior. The extracted current-limiting characteristics of the p-type samples are in good agreement with a pn-junction model. The stability of the emission current of the p-type samples is measured by constant voltage measurements and compared to the extracted current-limiting characteristics. The application of the algorithm to measurement data shows that the given algorithm is a valuable tool to analyze field emission measurement data influenced by nonemissive processes. Y1 - 2017 U6 - https://doi.org/10.1116/1.4971768 VL - 35 IS - 2 ER - TY - JOUR A1 - Prommesberger, Christian A1 - Bachmann, Michael A1 - Düsberg, Felix A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Hofmann, Martin A1 - Pahlke, Andreas A1 - Schreiner, Rupert T1 - Regulation of the Transmitted Electron Flux in a Field-Emission Electron Source Demonstrated on Si Nanowhisker Cathodes JF - IEEE Transactions on Electron Devices N2 - We report on a method to stabilize the transmitted electron flux in a field-emission electron source using an external regulation circuit. The electron source was realized with an array of silicon (Si) nanowhiskers on the top of elongated pillar structures, a mica spacer, and an extraction grid made of Si. As for most applications, the emitted electron current from the cathode is not as crucial as the transmitted electron flux through the extraction grid toward the anode. We investigated a method which allows the regulation directly by the emitted electron flux and not merely on the cathode current. By using this method, we were able to stabilize the emitted electron flux of our electron source down to values below 1%. Simultaneously, it was shown that there is the possibility to stabilize the influencing value in the real application as well. The effectiveness of this method was demonstrated successfully with an X-ray source setup. The measured X-ray photon count rate was stabilized to a standard deviation of 0.30% at a pressure of 1 × 10 -7 mbar. Even in harsh environment of 2 × 10 -5 mbar, a stabilization of the X-ray photon count rate down to a value of 0.63% was achieved. KW - Cathodes KW - Nanostructured devices KW - Current measurement KW - Photonics KW - Electron sources KW - Emissions KW - Voltage measurement Y1 - 2017 U6 - https://doi.org/10.1109/TED.2017.2763239 SN - 5128-5133 VL - 64 IS - 12 PB - IEEE ER - TY - CHAP A1 - Lindner, Matthias A1 - Berndt, Dominik A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Schreiner, Rupert A1 - Pipa, Andrei V. A1 - Hink, Rüdiger A1 - Foest, Rüdiger A1 - Brandenburg, Ronny A1 - Max, Alexander A1 - Caspari, Ralf T1 - Fabrication, surface integration and testing of miniaturized dielectric barrier discharge plasma actuators for active flow control applications T2 - AIAA Aviation 2019 Forum, 17-21 June 2019, Dallas, Texas Y1 - 2019 U6 - https://doi.org/10.2514/6.2019-2998 ER - TY - CHAP A1 - Lindner, Matthias A1 - Berndt, Dominik A1 - Tschurtschenthal, Karl A1 - Ehrlich, Ingo A1 - Jungbauer, Bastian A1 - Schreiner, Rupert A1 - Pipa, Andrei V. A1 - Hink, Rüdiger A1 - Foest, Rüdiger A1 - Brandenburg, Ronny A1 - Neuwirth, Daniel A1 - Karpen, Norbert A1 - Bonaccurso, Elmar A1 - Weichwald, Robert A1 - Max, Alexander A1 - Caspari, Ralf T1 - Aircraft Icing Mitigation by DBD-based Micro Plasma Actuators T2 - AIAA AVIATION 2020 FORUM: June 15-19, 2020 N2 - We present the application of plasma actuators as a technology for ice prevention at airfoils. The miniaturized dielectric barrier discharge (DBD) plasma actuators (PA) were fabricated by means of microelectromechanical systems (MEMS). We elucidate how to make the actuator samples scalable and applicable to any desired shape by the use of flexible inorganic zirconia substrates. For this purpose, we applied our developed embedding method to integrate the micro actuators in modern carbon/glass fiber reinforced polymer (CFRP/GFRP) materials. Next, the embedded actuator samples were mounted on a mechanical air profile-like fixture and placed in the icing wind tunnel iCORE. The samples were tested in rime ice conditions at temperatures of -15 to -20° C and air speeds up to 30 m/s. Unlike other groups we used a thin film zirconia substrate as dielectric for the plasma actuator. Due to the low substrate thickness of just 150 µm, an operating voltage of 2 kVRMS is already sufficient enough for a stable plasma formation. The experiments show that the operated actuator was able to prevent the ice formation and first indications of a De-icing function were also found. Hence, we show that it is feasible to realize an anti-icing system with zirconia-based plasma actuators operated at lower voltages compared to conventional ones. Y1 - 2020 U6 - https://doi.org/10.2514/6.2020-3243 ER - TY - JOUR A1 - Herrmann, Frank A1 - Büttner, Simon T1 - Automatische Qualitätskontrolle mittels Maschinellem Lernen und SAP Leonardo JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - In vielen Unternehmen werden von Menschen durch Ansehen von Produkten Produktionsfehler identifiziert. Die übersehenen Produktionsfehler führen zunehmend häufiger zu teuren Kundenreklamationen. Für die Produktion von Fußbällen wird in dieser Arbeit diese manuelle Qualitätssicherung analysiert. Als Alternative werden die Fußbälle durch einen Roboter fotografiert u nd durch maschinelles Lernen werden Produktionsfehler auf diesen digitalen Fotos identifiziert. Dieser Prüfprozess wird in SAP Leonardo implementiert und damit wird der bereits in einem SAP System implementierte Produktionsprozess (bzw. Unternehmensprozess) erweitert, wodurch ein durchgängig digitalisierter Gesamtprozess implementiert wird. Dadurch werden signifikant bessere Prüfergebnisse erreichtb und die Durchlaufzeit des Prüfprozesses wird substantiell reduziert. KW - Industrie 4.0 KW - SAP Leonardo KW - SAP S/4HANA KW - ERP - System KW - Machine Learning KW - durchgängig digitalisierter Produktionsprozess Y1 - 2019 UR - https://akwi.hswlu.ch/issue/view/376/431 SN - 2296-4592 IS - 10 SP - 46 EP - 53 PB - AKWI ER - TY - JOUR A1 - Prommesberger, Christian A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Schreiner, Rupert T1 - Investigations on the long-term performance of gated p-type silicon tip arrays with reproducible and stable field emission behavior JF - Journal of Vacuum Science & Technology B N2 - The authors report on the fabrication and characterization of p-type Si tip arrays with an integrated gate electrode for applications as field emission electron sources. After the reactive ion etching of the emitters, the combined thermal dry and wet oxidation was used for both the sharpening of the emitters and for the realization of an enhanced insulation layer. Au was evaporated in a self-aligned process as gate electrode. Arrays of 16 Si tips were fabricated with tip heights of about 3 μm and tip radii of about 20 nm with integrated gate electrode concentrically positioned ≈2 μm below the tip apex. Integral measurements with an additional anode showed improved field emission properties with a reproducible and stable emission behavior. A fast activation of the tips, low onset voltages of about 30 V, and moderate field emission currents up to 0.55 μA were noticed. The field emission parameters were calculated using the Fowler–Nordheim characteristics. A pronounced saturation regime was observed, and current fluctuations of less than ±1% were investigated for 30 min. Long-term measurements were carried out for a period of more than 8 h. In the first 6 h of operation, the authors observed a drift of the emission current from 0.35 to 0.55 μA caused by an increased emission surface. Y1 - 2017 U6 - https://doi.org/10.1116/1.4972519 VL - 35 IS - 1 ER - TY - JOUR A1 - Breuer, Janis A1 - Bachmann, Michael A1 - Düsberg, Felix A1 - Pahlke, Andreas A1 - Edler, Simon A1 - Langer, Christoph A1 - Prommesberger, Christian A1 - Ławrowski, Robert Damian A1 - Schreiner, Rupert A1 - Serbun, Pavel A1 - Lützenkirchen-Hecht, Dirk T1 - Extraction of the current distribution out of saturated integral measurement data of p-type silicon field emitter arrays JF - Journal of Vacuum Science and Technology B N2 - At the moment, only complicated techniques are known for the determination of array properties of field emitter arrays such as the number of active tips, the current distribution, or the individual tip radii. In this work, a method for extracting these parameters from integral measurement data is presented. A model describing the characteristics of a single emitter, including the saturation as a function of the applied voltage and the emitter radius, is developed. It is shown that experimental data of field emitter arrays can be represented as the sum of these functions and the characteristic parameters can be fitted to field emission data of an array. Using this method, the values of the radii as well as the parameters of distribution models can be determined directly. Analysis of experimental data from p-type Si emitter arrays shows that only 1–2% of the tips contribute significantly. Y1 - 2018 U6 - https://doi.org/10.1116/1.5035189 VL - 36 IS - 5 PB - AIP Publishing ER - TY - JOUR A1 - Edler, Simon A1 - Bachmann, Michael A1 - Breuer, Janis A1 - Dams, Florian A1 - Düsberg, Felix A1 - Hofmann, Martin A1 - Jakšič, Jasna A1 - Pahlke, Andreas A1 - Langer, Christoph A1 - Ławrowski, Robert Damian A1 - Prommesberger, Christian A1 - Schreiner, Rupert T1 - Influence of adsorbates on the performance of a field emitter array in a high voltage triode setup JF - Journal of Applied Physics N2 - In the present work, black-silicon field emitter arrays (FEAs) are investigated regarding the influence of residual gas pressure on the characteristics and lifetime in the high voltage triode setup. Current-voltage-characteristics at different pressure levels are recorded and show a decreasing emission current with rising pressure. This decrease can be explained by an increase of the work function and charging of the emitter surface caused by adsorbates. The emission current can be restored to its initial value by heating of the FEA up to 110 °C during active emission. With this regeneration procedure, an extended lifetime from about 20 h to 440 h at a residual gas pressure of 10−5 mbar is achieved. Y1 - 2017 U6 - https://doi.org/10.1063/1.4987134 VL - 122 ER - TY - THES A1 - Zrenner, Louis T1 - Modellierung des gekoppelten thermischen und hydraulischen Verhaltens von ZFSV-Bettungen bei erdverlegten Höchstspannungsleitungen BT - Berechnung der thermo-hydraulischen Wechselwirkungen in Plaxis 2D anhand der Messergebnisse des DC CTL DBI Projekts N2 - Durch die dezentrale Energiegewinnung, welche aus dem Fokus auf regenerative Stromerzeugung resultiert, ist ein Ausbau des Übertragungsnetzes alternativlos – auch mit Hinblick auf den steigenden Strombedarf in den kommenden Jahrzehnten. Der Ausbau ist bereits beschlossene Sache, schreitet aber schleppend voran. Die Gründe hierfür sind jedoch nicht etwa Verzögerungen in der Bauausführung, sondern vor allem die Ablehnung innerhalb der Bevölkerung gegenüber dem Neubau von Stromtrassen. Jahrelange Planungs- und Genehmigungsphasen sowie regelmäßige Änderungen der Trassenverläufe sind die Folge. Die Bürgerbewegungen gegen den Netzausbau sind meist mit auf dem Einfluss auf das Landschaftsbild, der Strahlungsbelastung oder Lärmbelästigung begründet. Eine Erdverlegung würde hinsichtlich dieser Probleme (trotz kurzfristiger Mehrbelastung während der Bauphase) eine Alternative darstellen, weist jedoch baubedingte Problematiken wie den Abtransport der Verlustwärme auf. Bei einer klassischen Sandbettung hängt die Wärmeleitfähigkeit maßgeblich vom Wassergehalt des Sandes ab, welcher je nach Witterungslage und geologischen Gegebenheiten sehr stark schwankt. Als Folge muss die Trasse für den ungünstigsten Fall und damit unwirtschaftlich bemessen werden. Im Rahmen des Forschungsprojekts „DC-CTL DBI“ wurde eine gasisolierte HGÜ-Leitung (GIL) erdverlegt und einem Langzeitversuch unterzogen. Anstelle einer Sandbettung wurde jedoch ein zeitweise fließfähiger, selbstverdichtender Verfüllbaustoff (ZFSV) verwendet. Für den Einsatz als thermische Bettung bietet ein ZFSV mehrere Eigenschaften, welche eine klassische Sandbettung nicht bietet. So ist mit Hinblick auf die verschweißte Aluminium-Hülle der GIL kein Verdichtungsaufwand nötig, welcher bei aktueller Bauform zweifelsfrei in Schäden resultieren würde. Darüber hinaus weisen Flüssigböden durch den Bentonit-Gehalt eine höhere adsorbierende Oberfläche auf, wodurch der Anteil des Haftwassers im Boden zunimmt und die Wärmeleitfähigkeit der Bettung in ihrer Konstanz positiv beeinflusst wird. Im Zuge dieser Arbeit wurden die thermischen und hydraulischen Transportprozesse um die GIL mittels FEM in Plaxis2D untersucht und transient über den gesamten Messzeitraum (18 Monate) berechnet. Hierfür wurden die Materialparameter durch labortechnische Versuche ermittelt und die Messergebnisse einer verbauten Wetterstation als Randbedingungen (Niederschlag, Temperatur, Evapotranspiration) aufgebracht. Die Ergebnisse aus Plaxis2D wurden abschließend mit der im Feldversuch verbauten Sensorik verglichen. Es zeigte sich, dass sowohl die Boden- als auch die Leitertemperaturen nur um wenige Grad von den Messwerten der Sensorik abweichen. Anders als bei den etablierten analytischen Bemessungsrechnungen, welche stets auf Vereinfachungen basieren, können auch Effekte wie konvektiver Wärmetransport oder Austrocknung bei gleichzeitig höherer Genauigkeit der Ergebnisse untersucht werden. Um den Rechenaufwand gering zu halten, wurden lediglich die thermischen und hydraulischen Entwicklungen und Einflüsse des Bodens berücksichtigt. Es ist aber durchaus möglich, Verformungen und Kräfte in die Berechnung zu integrieren und so ein ganzheitliches Berechnungsmodell zu erstellen. KW - Geotechnik KW - ZFSV KW - Erdkabel KW - FEM KW - underground cables Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-17905 ER - TY - JOUR A1 - Lauer, Norina A1 - Giordano, Katharina A1 - Kreiter, Daniel A1 - Leusch, Vera A1 - Corsten, Sabine T1 - "Mach mal ’ne App" BT - Qualitätssicherung digitaler Entwicklungen am Beispiel der App BaSeTaLK JF - Forum Logopädie N2 - Die Entwicklung qualitativ hochwertiger Apps zur Gesundheitsversorgung erfordert einen aufwendigen Entwicklungsprozess, an den sich eine Evaluation der App-gestützten Maßnahme anschließen sollte, um Aussagen zur Wirksamkeit treffen und somit den App-Einsatz begründen zu können. In diesem Beitrag wird die nutzerzentrierte Entwicklung der App BaSeTaLK vorgestellt, mit der eine Tablet-gestützte Stimulation biographisch orientierter Gespräche bei älteren Menschen zur Verbesserung des psychischen Wohlbefindens ermöglicht werden soll. Nach erfolgreicher Evaluation könnten LogopädInnen als MultiplikatorInnen den Einsatz der App vermitteln. KW - App KW - Biografieforschung KW - Qualitätskontrolle KW - Senioren KW - Design Thinking Y1 - 2021 U6 - https://doi.org/10.2443/skv-s-2021-53020210304 VL - 35 IS - 3 SP - 20 EP - 27 PB - Schulz-Kirchner ER - TY - GEN ED - Rudolph, Clarissa ED - Reber, Anne ED - Dollsack, Sophia T1 - Geschlechtergerechtigkeit und MINT BT - Irritationen, Ambivalenzen und Widersprüche in Geschlechterdiskursen an Hochschulen KW - Hochschule KW - MINT-Fächer KW - Gleichstellung KW - Frauenförderung Y1 - 2022 SN - 978-3-8474-1674-6 U6 - https://doi.org/10.3224/84742519 PB - Verlag Barbara Budrich CY - Opladen ; Berlin ; Toronto ER - TY - JOUR A1 - Lührmann, Melanie A1 - Weiss, Matthias T1 - The Effect of Working Time and Labor Force Participation on Unemployment BT - A New Argument in an Old Debate JF - Economic Modelling N2 - This paper introduces a new argument into the theoretical literature on labor market effects of changes in working hours and labor force participation. We advance a general equilibrium model in which increased labor supply reduces unskilled unemployment via consumer demand: longer work hours and higher labor force participation imply higher incomes and less (leisure) time. In consequence, home production is reduced in favor of outsourcing domestic tasks to the market, shifting consumer demand toward unskill-intensive goods. Relative demand for unskilled labor rises and unemployment falls. Finally, we provide empirical support for the basic mechanisms of our model for Germany. KW - Working time reduction KW - Labor force participation KW - Low skill unemployment KW - Home production KW - Time use Y1 - 2010 U6 - https://doi.org/10.1016/j.econmod.2009.07.024 VL - 27 IS - 1 SP - 67 EP - 82 ER - TY - CHAP A1 - Börsch-Supan, Axel A1 - Düzgün, Ismail A1 - Weiss, Matthias ED - Börsch-Supan, Axel ED - Erlinghagen, Marcel ED - Hank, Karsten ED - Jürges, Hendrik ED - Wagner, Gert G. T1 - Altern und Produktivität BT - Eine neue Sichtweise T2 - Produktivität in alternden Gesellschaften KW - Alternde Bevölkerung KW - Arbeitsproduktivität Y1 - 2009 SP - 53 EP - 62 PB - Wissenschaftliche Verlagsgesellschaft mbH CY - Stuttgart ER - TY - CHAP A1 - Ilmakunnas, Pekka A1 - Skirbekk, Vegard A1 - van Ours, Jan A1 - Weiss, Matthias ED - Garibaldi, Pietro T1 - Ageing and Productivty T2 - Ageing, Health, and Productivity: The Economics of Increased Life Expectancy KW - Alter KW - Arbeitsproduktivität KW - Gesundheitsausgaben KW - Wirtschaftsentwicklung Y1 - 2009 SP - 135 EP - 219 PB - Oxford University Press CY - Oxford ER - TY - JOUR A1 - Weiss, Matthias T1 - Skill-Biased Technological Change BT - Is there Hope for the Unskilled? JF - Economics Letters N2 - This paper presents a model in which perpetual skill-biased technological change does not lead to ever-increasing wage inequality. The model is consistent with the increase in wage inequality in the 1980s and the subsequent stabilization in the 1990s. KW - Skill-biased technological change KW - Wage inequality KW - Factor substitution Y1 - 2008 U6 - https://doi.org/10.1016/j.econlet.2008.03.022 VL - 100 IS - 3 SP - 439 EP - 441 ER - TY - CHAP A1 - Börsch-Supan, Axel A1 - Düzgün, Ismail A1 - Weiss, Matthias ED - Prager, Jens U. ED - Schleiter (Hrsg.), André T1 - Sinkende Produktivität alternder Belegschaften? BT - Zum Stand der Forschung T2 - Länger leben, arbeiten und sich engagieren. Chancen werteschaffender Beschäftigung bis ins Alter Y1 - 2006 SN - 3892049130 SP - 85 EP - 102 PB - Bertelsmann Stiftung CY - Gütersloh ER - TY - JOUR A1 - Börsch-Supan, Axel A1 - Weiss, Matthias ED - Kruse, Andreas T1 - Erfahrungswissen in der Arbeitswelt JF - Potenziale im Altern. Chancen und Aufgaben für Individuum und Gesellschaft Y1 - 2010 SP - 221 EP - 234 PB - AKA CY - Heidelberg ER - TY - JOUR A1 - Weiss, Matthias ED - Kuhn, Michael ED - Ochsen, Carsten T1 - Absenteeism in Age-Diverse Work Teams JF - Labour Markets and Demographic Change N2 - Age-diverse work teams are being advocated as an important management tool to enhance performance and productively employ older workers. However, this advice is not founded on empirical evidence. There are very few studies that look at the relation between performance and age diversity of work teams. This lack of evidence is mainly due to a lack of available data. Information on performance and worker composition of a productive unit is available almost exclusively on the plant level in matched employer-employee data sets. But on the plant level/age heterogeneity of the workforce does not tell much about age diversity on the level where co-operation/teamwork takes place (work teams, departments, etc.). If all of the older workers work in the administration whereas all the young employees work in the production, the firm's workforce may be highly age-diverse, but work teams and departments are age-homogeneous. This problem notwithstanding, Grund and Westergård-Nielsen (2005) look at the relation between productivity and the standard deviation of workers’ age in a sample of 7,000 Danish firms. They find a hump-shaped relation. Y1 - 2009 U6 - https://doi.org/10.1007/978-3-531-91478-7_3 SP - 40 EP - 57 PB - VS Verlag CY - Wiesbaden ER - TY - JOUR A1 - Weiss, Matthias T1 - Erfahrung kompensiert nachlassende Fähigkeiten BT - Optimistische Befunde aus der Altersforschung JF - Personalführung Y1 - 2013 IS - 1 SP - 56 EP - 58 ER - TY - JOUR A1 - Sterner, Michael A1 - Bauer, Franz T1 - Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland JF - Chemie-Ingenieur-Technik N2 - Um den Einfluss verschiedener Power-to-X-Verfahren auf die Transformation des deutschen Energiesystems und das Erreichen der Klimaschutzziele zu überprüfen, wurde ein sektorübergreifendes Energiesystemmodel entwickelt. Die daraus gewonnenen Ergebnisse zeigen: Für eine erfolgreiche Energiewende ist der Einsatz von Power-to-X in Zukunft unverzichtbar. Vor allem in Bereichen und Sektoren, in denen hohe Energiedichten erforderlich und nur wenig andere Optionen zur Defossilisierung vorhanden sind, werden Power-to-X-Technologien zwingend notwendig. T2 - Power-to-X in Context of Energy Transition and Climate Change Mitigation in Germany KW - Power-to-Gas KW - Climate mitigation KW - Energy system KW - Modeling KW - Power-to-X KW - Klimaschutz KW - Energiewende Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-11669 SN - 0009-286X N1 - Corresponding author: Franz Bauer VL - 92 IS - 1-2 SP - 85 EP - 90 PB - Wiley ER - TY - JOUR A1 - Schubert, Martin J. W. A1 - Höfflinger, Bernd A1 - Schröder, D. A1 - Zingg, René P. T1 - 1D Modeling of SOI MOSFETs Using Distinct Quasi-Fermi Potentials JF - Microelectronic Engineering N2 - Distinct electron and hole quasi-Fermi potentials, øf,n and øf,p, are included into a one-dimensional SOI MOSFET model that accounts for finite inversion and depletion layer thicknesses. The inclusion of øf,n, øf,p in the nonlinear analytical model is demonstrated to describe phenomena like kink effect and the multistable-charge-controlled-memory effect (MCCM) in SOI MOSFETs. The calculation of øf,p(t) depends on the device history and generation/recombination rates. Y1 - 1991 U6 - https://doi.org/10.1016/0167-9317(91)90221-X VL - 15 IS - 1-4 SP - 237 EP - 240 ER - TY - CHAP A1 - Schubert, Martin J. W. T1 - Mixed Analog-Digital Signal Modeling Using Event-Driven VHDL T2 - X Brazilian Symposium on Integrated Circuit Design (SBCCI'97), August 25-27 1997, Porto Alegre, Brazil N2 - A method for solving networks containing generic analog components such as resistors, capacitors and inductors onan event driven time axis using digital VHDL is presented. The components are modeled as complex state machines communicating with their neighbors using INOUT type ports. The method takes advantage of simulation deltas to iterate without simulation-time consumption. A limited range of implicit equations can be solved this way. Y1 - 1997 UR - http://citeseerx.ist.psu.edu/viewdoc/download;jsessionid=50F6F0DA594FB90976CC1474581BC139?doi=10.1.1.508.3657&rep=rep1&type=pdf SP - 77 EP - 86 ER - TY - JOUR A1 - Schubert, Martin J. W. T1 - 70V-to-5V Differential CMOS Input Interface JF - IEE Electronic Letters Y1 - 1994 U6 - https://doi.org/10.1049/el:19940235 VL - 30 IS - 4 SP - 296 EP - 297 ER - TY - CHAP A1 - Declerq, Michel A1 - Schubert, Martin J. W. A1 - Clément, F. T1 - 5V-to-75V CMOS Output Interfaces T2 - Proceedings of the1993 IEEE International Solid-State Circuits Conference (ISSCC), Feb. 24-26 1993, San Francisco, CA, USA N2 - A family of CMOS low- to high-voltage output interface circuits based on a standard, unmodified low-voltage CMOS technology is described. Using only thin-oxide high-voltage (HV) devices with reduced V/sub GS/ (gate-to-source voltage) swing, it makes use of level-shift techniques to meet the constraints on the gate control signals. These static circuits permit the full output voltage swing of V/sub DDH/, while keeping the V/sub GS/ swing of the output devices within the safety limits, including during HV supply transients. Using a standard 2- mu m n-well CMOS technology, reliable, reproducible V/sub DS/ breakdown voltages as high as 120 V and 80 V have been obtained for HV-nMOS and HV-pMOS devices, respectively.< > Y1 - 1993 U6 - https://doi.org/10.1109/ISSCC.1993.280014 SP - 162 EP - 163 ER - TY - JOUR A1 - Schubert, Martin J. W. A1 - Höfflinger, Bernd A1 - Zingg, René P. T1 - An Analytical Model for Strongly Inverted and Accumulated Silicon Films JF - Solid-State Electronics N2 - An analytical model for the spatial distribution of potential, electric field and carrier densities is presented, assuming uniform doping density and constant quasi-Fermi potentials in the direction of modeling. Starting from the current relations a differential equation respecting two-dimensional effects is developed and solved approximately by decomposition in three regions with different preconditions: (a) flatband region, (b) constant spacecharge density and (c) strong inversion or accumulation. Inaccuracies arise mainly from violated preconditions at the interfaces between the different regions. Two-dimensional effects are respected in the analytical model of (b) only but they influence region (c) by means of boundary conditions at the interface of (b) and (c). The investigations of this paper are focused to region (c). This part of our model is identical to the model of Hauser and Littlejohn[1]. They integrated a simplified form of the semiconductor-Poisson equation twice but were restricted to one-dimensional applications and thermal equilibrium. Our derivation allows for large electric fields and current densities perpendicular to the direction of modeling. From analytical considerations confirmed by numerical experiments we suggest preference to the gradual channel condition, with x and y defined according to Fig. 1. This definition allows the potentials to vary significantly with respect to y. We found that this holds for the quasi-Fermi potentials also. Furthermore an empirical model for the maximum width of strong-inversion layers in uniformly doped silicon films is presented in eqn (46). Y1 - 1990 U6 - https://doi.org/10.1016/0038-1101(90)90136-3 VL - 33 IS - 12 SP - 1553 EP - 1567 PB - Elsevier ER - TY - CHAP A1 - Schubert, Martin J. W. T1 - Mixed Signal Modeling in VHDL by Distributed Local Iteration T2 - VHDL Form, Toledo, Spain, April 20-24, 1997 Y1 - 1997 ER - TY - CHAP A1 - Declerq, Michel A1 - Clément, F. A1 - Schubert, Martin J. W. A1 - Harb, Adnan A1 - Dutoit, Michel T1 - Design and Optimization of High-Voltage CMOS Devices Compatible wih a Standard 5V CMOS Technology T2 - Proceedings of IEEE Custom Integrated Circuits Conference, May 9-12 1993, San Diego, CA, USA N2 - High-voltage n- and p-MOSFETs fully compatible with a standard 5 V CMOS technology have been designed, optimized, and fabricated. No process changes are required. By modifying the logical equations generating one of the physical masks from the design masks, a p-type buffer region for the high-voltage p-MOS was easily implemented. This modification does not affect the low-voltage part of the circuits. These high-voltage devices have been used successfully as output drivers in semicustom arrays, and as building blocks for custom low- to high-voltage output interfaces. Aspects of reliability, device protection, and circuit design techniques are addressed. Y1 - 1993 SN - 0-7803-0826-3 U6 - https://doi.org/10.1109/CICC.1993.590766 SP - 24.6.1 EP - 24.6.4 ER - TY - THES A1 - Schubert, Martin J. W. T1 - Eindimensionale Modellierung von SOI MOSFETs Y1 - 1991 CY - Hamburg ER - TY - JOUR A1 - Schubert, Martin J. W. A1 - Höfflinger, Bernd A1 - Zingg, René P. T1 - A One-Dimensional Analytical Model for the Dual-Gate-Controlled Thin-Film SOI MOSFET JF - IEEE Electron Device Letters N2 - A one-dimensional analytical model for dual-gate-controlled SOI MOSFETs is presented and applied to a stacked p-channel MOSFET fabricated by epitaxial lateral overgrowth (ELO). The authors found and modeled a nonlinear dependence of front-gate threshold voltage on back-gate voltage if threshold is defined by a constant current instead of a constant silicon-surface potential. It is demonstrated by comparison of subthreshold slopes that surface potentials are not pinned to the onset of strong inversion or accumulation. Accurate one-dimensional modeling is a necessity for device characterization and a precondition for general SOI models for circuit simulation.< > Y1 - 1991 U6 - https://doi.org/10.1109/55.116927 VL - 12 IS - 9 SP - 489 EP - 491 ER - TY - CHAP A1 - Schubert, Martin J. W. A1 - Höfflinger, Bernd A1 - Zingg, René P. T1 - A New Analytical Charge Model for the Dual-Gate-Controlled Thin-Film SOI MOSFET T2 - Superlattices and Microstructures N2 - An analytical model for dual-gate-controlled SOI MOSFETs is presented, assuming uniformly doped p-silicon films. It is restricted to electron inversion layers and depletion regions, neglecting hole densities. It allows to account for the spatial description of electronic quantities in the silicon film. Due to the non-linearities of the semiconductor equations the model parameters must be extracted iteratively. Some applications are presented to demonstrate the usefulness of the model. Y1 - 1990 U6 - https://doi.org/10.1016/0749-6036(90)90218-V VL - 7 IS - 4 SP - 323 EP - 326 PB - Elsevier ER - TY - THES A1 - Spirkl, Florian T1 - Vergleichende rechnerische Untersuchungen zur Lastaufteilung und Setzungen von Stabilisierungssäulen mit Lasttransferschichten N2 - Die Erschließung von Neubauflächen, steigende Bauwerkslasten und strengere Anforderungen an Setzungen und Setzungsdifferenzen führen zu einem steigenden Bedarf an Tiefgründungsmaßnahmen. Eine relativ junge Entwicklung auf diesem Gebiet ist die Anwendung von Stabilisierungssäulen (StS) und pfahlähnlichen Tragelementen als Alternative zur konventionellen Pfahlgründung. Auf Grund der im Vergleich zum Pfahl geringeren Tragfähigkeit der StS werden diese zumeist als „Säulenwald“ angeordnet und die abzutragende Last über eine Lasttransferschicht (LTS) auf die einzelnen StS abgeleitet. Zusätzlich wird häufig eine oder mehrere Geogitterlagen eingebracht, was zur Erhöhung des Lastanteils der StS führt. Ein gängies Anwendungsbeispiel hierfür ist z.B. die Gründung eines Damms. Über die Lastaufteilung zwischen StS und anstehender Weichschicht wurden im Laufe der Jahre verschiedenste Theorien und Berechnungsansätze veröffentlicht. Zunächst wird eine Auswahl verschiedener geschlossener Berechnungsansätze für den 3-dimensionalen Fall vorgestellt und miteinander verglichen. Diesen ist gemein, dass für die Lastaufteilung lediglich die bodenmechanischen Eigenschaften der LTS und die geometrischen Parameter benötigt werden. Eine Berücksichtigung der anstehenden Weichschicht ist z.B. bei der iterativen Berechnung mittels Lasttransfermethode oder bei FE-Berechnungen möglich. Diese Ansätze werden, da durch die Berücksichtigung der Eigenschaften der Weichschicht weitere Freiheitsgrade entstehen, gesondert miteinander verglichen. Abschließend wird an Hand zweier Beispiele die Komplexität der Problemstellung „Ermittlung der Laustaufteilung zwischen StS und WS“ aufgezeigt. KW - Geotechnik KW - Stabilisierungssäule KW - Lasttransferschicht Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-15713 CY - Regensburg ER - TY - CHAP A1 - Romano, Marco A1 - Micklitz, Matthias A1 - Olbrich, Florian A1 - Bierl, Rudolf A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Experimental investigation of damping properties of unidirectionally and fabric reinforces plastics by the free decay method T2 - Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014 Y1 - 2014 SP - 665 EP - 679 ER - TY - CHAP A1 - van der Weerd, Bastiaan A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO) T2 - Electrochemistry 2014, September 22 - 24, Mainz Y1 - 2014 ER - TY - GEN A1 - van der Weerd, Bastiaan A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A Conductivity Probe for Determination of the Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO) T2 - Proceedings of the 9th ISC Modern Analytical Chemistry 2013, Prag Y1 - 2013 UR - https://www.gdch.de/fileadmin/downloads/Veranstaltungen/Tagungen/2014_Tagungen/analytica/poster_abstracts/sens03_vanderweerd_5860.pdf ER - TY - GEN A1 - Rück, Thomas A1 - Hofmann, Matthias A1 - Bierl, Rudolf T1 - Development of a miniaturized photoacoustic multigas sensing system for trace gas measurement T2 - 17th International Conference on Photoacoustic and Photothermal Phenomena, Oct. 20-24, 2013, Suzhou China Y1 - 2013 UR - https://www.gdch.de/fileadmin/downloads/Veranstaltungen/Tagungen/2014_Tagungen/analytica/poster_abstracts/sens05_rueck_5925.pdf ER - TY - CHAP A1 - van der Weerd, Bastiaan A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO) T2 - analytica Conference 2014, 1. bis 4. April, München Y1 - 2014 ER - TY - CHAP A1 - Hofmann, Matthias A1 - Bierl, Rudolf A1 - Rück, Thomas T1 - Implementation of a dual-phase lock-in amplifier on a TMS320C5515 digital signal processor T2 - Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam N2 - A digital dual-phase lock-in amplifier that is capable to run on a low-cost, low-power platform comprising a 16-bit fixed-point digital signal processor was developed. This is achieved by a set of optimised digital filters including an exponential averager to adjust the time constant of the overall filter. The reference frequency is generated using a direct digital synthesis source utilising angle decomposition with a resolution of 1 Hz. The digital lock-in algorithm is described and the performance of the algorithm is analysed. The experimental results show that the developed lock-in amplifier achieves similar performance to a commercially available lock-in amplifier. Y1 - 2012 U6 - https://doi.org/10.1109/EDERC.2012.6532217 ER - TY - RPRT A1 - Unger, J. A1 - Rück, Thomas A1 - Landgraf, Ferdinand A1 - Bierl, Rudolf T1 - Herstellung und Analyse der Resonanzfrequenz eines MEMS Cantilever für das CEPAS Verfahren N2 - Diese Abhandlung beschreibt das Konzept eines mikroeletromechanischen Systems (MEMS), das im Messverfahren der cantilever enhanced photoacoustic spectroscopy (CEPAS) Verwendung finden soll. Es wird die Herstellung eines einseitig eingespannten Biegebalkens aus Silizium mittels deep reactiv ion etching (DRIE) beschrieben. Des Weiteren wird die Resonanzfrequenz dieses Cantilevers mit Hilfe Laservibrometertechnik untersucht. Die resultierenden resonanten Schwingungen 0.Ordnung werden mit den Ergebnissen einer vereinfachten theoretischen Näherung verglichen. Die Messergebnisse stehen in gutem Zusammenhang mit den theoretischen Werten. Solche Cantilever, die aus silicon on insula tor (SOI) Wafer angefertigt wurden, weisen bei einer Zielfrequenz ein mittlere Abweichung von Δf = 118±26Hz (bzw.Δf =0,76±0,17%) auf. Y1 - 2015 ER - TY - JOUR A1 - Romano, Marco A1 - Micklitz, Matthias A1 - Olbrich, Florian A1 - Bierl, Rudolf A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method JF - Journal of Achievements in Materials and Manufacturing Engineering N2 - Purpose: of this paper is experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method. Design/methodology/approach: For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out. In detail the free decay behaviour of flat beamlike specimens under fixed-free boundary conditions and relatively constant and reproducible displacement excitation is investigated. Findings: The vibrating structure has been measured by a laser scanning vibrometer PSV 400 from POLYTEC. In both cases evaluation of the results yields enhanced damping properties of the specimens with fabric reinforcement compared to the unidirectionally reinforced specimens. The results justify the presumed acting of a mesomechanic kinematic. Research limitations/implications: The results show that in either case the material damping in terms of the logarithmic decrement of the fabric reinforced material is higher than the material damping in of the unidirectionally reinforced material. Additionally, when the fabric reinforced specimens are addressed, in each case the plain weave reinforced specimens exhibited higher values of the material damping as the twill weave 2/2 reinforced ones. Originality/value: Ondulations in fabrics as a textile semi-finished product are caused by the alternating crossing of warp and fill yarns. In the mesoscopic scale the acting of a mesomechanic kinematic is presumed to enhance the damping properties under cyclic elastic deformation. For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out. KW - structural vibration KW - damping KW - fibre reinforced plastics KW - mesomechanic scale KW - fabric reinforced layer Y1 - 2014 VL - 63 IS - 2 SP - 65 EP - 80 ER - TY - CHAP A1 - Eisenried, Michael A1 - Romano, Marco A1 - Jungbauer, Bastian A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert ED - Ziemann, Olaf ED - Bogner, Werner ED - Mottok, Jürgen T1 - Influence of parameters of the production process on the material quality of unidirectionally reinforced prepregs T2 - Applied Research Conference 2013, ARC 2013 ; 17th and 18th October 2013, Deggendorf Y1 - 2013 SP - 70 EP - 75 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Bruland, Matthias A1 - Schmid, Vinzent A1 - Ehrlich, Ingo ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - Analyzing and Testing of a Single Solution of Self-cutting Thread Inserts in Composites T2 - Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 SP - 286 EP - 288 PB - Shaker ER - TY - CHAP A1 - Hoinkes, Carl J. J. A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Höcherl, Johannes A1 - Gebbeken, Norbert ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - Investigation of fibre reinforced plastics with monolithic and hybrid stacking sequences under high-velocity impact loads T2 - Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Valentino, Piergiorgio A1 - Romano, Marco A1 - Ehrlich, Ingo A1 - Furgiuele, Franco A1 - Gebbeken, Norbert ED - Iacovello, F. ED - Risitano, G. ED - Susmel, L. T1 - Mechanical characterization of basalt fibre reinforced plastic with different fabric reinforcements – Tensile tests and FE-calculations with representative volume elements (RVEs) T2 - Acta Fracturae - XXll Convegno Nazionale IGF (Italiano Gruppo Frattura) N2 - This paper describes the results of tensile tests and finite element (FE) calculations with representative volume elements (RVEs) of basalt fibre reinforced plastic with two different types of fabric reinforcements. As fabric reinforcements show repeating ondulations of warp and fill yarn, simple mixtures laws reach their limits. That is the reason why the mesoscopic dimension, lying between the microscopic and the macroscopic dimension, has to be taken into account when a mechanical characterization of fabric reinforced composites is carried out. The aim of this work is to determine the stiffness of a fabric reinforced composite in warp and fill direction with numerical investigations. The simulations are based on FE-calculation with two different RVEs. The tensile tests and the FE-calculations have been carried out for two different types of basalt fabrics, namely twill 2/2 and twill 1/3. The comparison between the experimental data and the results of the FE-calculations are provided in order to support the validity of the proposed model. Y1 - 2013 UR - http://www.gruppofrattura.it/pdf/convegni/22/IGFXXII/index.html#/242/ ER - TY - CHAP A1 - Ibanez Gomez, D. A1 - Kastenmeier, Andreas A1 - Ehrlich, Ingo ED - Ziemann, Olaf ED - Mottok, Jürgen ED - Pforr, Johannes T1 - Development and construction of a winding machine for the production of composite tubes T2 - 4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt Y1 - 2014 SP - 315 EP - 318 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Siegl, Marco A1 - Rieger, David A1 - Kovárík, Tomáš A1 - Ehrlich, Ingo T1 - Long-Term Behavior of Thermoplastics under UV Light tested by a self-build Device T2 - 3. OTH-Clusterkonferenz, 13. April 2018, Weiden, Tagungsband; Festschrift, 5 Jahre OTH-Verbund N2 - This article presents first results of artificial aging experi-ments by ultraviolet (UV) irradiation on thermoplasticmaterials conducted as an intent of the research project Thermoplastic Composite Structures (TheCoS) in colla-boration of the Ostbayerische Technische Hochschule(OTH) Regensburg and the University of West Bohemia(UWB) in Pilsen as part of a cross-border cooperation. In technical applications, thermoplastic materials are oftenaffected by aging and a related deterioration of the mechanical properties. Therefore, it is necessary to identifythe aging behavior of thermoplastic materials. For this,experiments were performed for three thermoplasticmaterials, namely polypropylene (PP), ultra high mole -cular weight polyethylene (UHMWPE) and high impactstrength polystyrene (HIPS). For these experiments, a UV chamber was constructed according to the internationalstandard EN ISO 4892-3 for simulation of exposurebehind window glass. The results are evaluated by testing the flexural strength and the dynamic mechanicalresponse after a selected period of time under UV lightand then compared to untreated test specimens. Y1 - 2018 UR - https://www.oth-regensburg.de/fileadmin/media/forschung/Dateien_2018/Clusterkonferenz-Tagungsband-2018.pdf SP - 118 EP - 122 ER - TY - CHAP A1 - Niebauer, M. A1 - Schmid, Vinzent A1 - Ehrlich, Ingo ED - Mottok, Jürgen ED - Reichenberger, Marcus ED - Scharfenberg, J. ED - Ziemann, Olaf T1 - Failure Criteria of Adhesively Bonded Joints BT - A Review T2 - Applied Research Conference 2015 - ARC 2015, Nürnberg, 3rd July 2015 - 16. Juli 2015 Y1 - 2015 SN - 978-3863869458 SP - 347 EP - 351 PB - Pro Business Verlag CY - Berlin ER -