TY - GEN A1 - Weber, Karsten T1 - KI-Nutzung für (psychisch) kranke Menschen: Auswirkungen auf das Professionsverständnis der Fachkräfte Y1 - 2024 ER - TY - JOUR A1 - Weber, Karsten T1 - Die Geschichte der Künstlichen Intelligenz - eine Geschichte der Enttäuschungen JF - Evangelium und Wissenschaft : Beiträge zum interdisziplinären Gespräch Y1 - 2024 VL - 45 IS - 1 SP - 2 EP - 16 PB - Karl-Heim-Gesellschaft ER - TY - CHAP A1 - Eiler, Julian A1 - Berndt, Dominik A1 - Schreiner, Rupert T1 - Miniaturisierter Wasserstoffsensor basierend auf der 3-Omega Methode T2 - Tagungsband zum 4. Symposium Elektronik und Systemintegration ESI: 17. April 2024, Hochschule Landshut N2 - Die Arbeit stellt einen thermischen Wasserstoffsensor auf Siliziumbasis vor, der mit der 3-Omega Messmethode betrieben wird. Durch das dynamische Messverfahren, die große Sensoroberfläche bei gleichzeitig geringer thermischer Masse und der Materialkombination wird eine Auflösungsgrenze von 55 ppm Wasserstoff in Stickstoff erreicht. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-4205 SN - 978-3-9818439-9-6 SP - 38 EP - 45 PB - Hochschule für Angewandte Wissenschaften Landshut CY - Landshut ER - TY - CHAP A1 - Buchner, Philipp A1 - Hausladen, Matthias A1 - Bartl, Mathias A1 - Schreiner, Rupert T1 - Elektronenquellen basierend auf Feldemission aus Silizium T2 - Tagungsband zum 4. Symposium Elektronik und Systemintegration ESI: 17. April 2024, Hochschule Landshut N2 - Der Beitrag gibt einen Überblick über zwei typische Bauformen für Elektronenquellen auf der Basis von Feldemission aus Silizium. Des Weiteren wird eine typische Trioden-Beschaltung solcher Elektronenquellen für hohe Elektronentransmission vorgestellt und dabei auf ihre Leistungsfähigkeit eingegangen. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-4212 SN - 978-3-9818439-9-6 SP - 46 EP - 53 PB - Hochschule für Angewandte Wissenschaften Landshut CY - Landshut ER - TY - JOUR A1 - Tremmel, Florian A1 - Nagler, Oliver A1 - Kutter, Christoph A1 - Holmer, Rainer T1 - Mechanical robustness analysis of semiconductors with a single needle probe card using acoustic emissions JF - e-Journal of Nondestructive Testing N2 - The combination of indentation testing and acoustic emission (AE) is widely used to analyze the fracture toughness of test substrates. In the manufacturing of semiconductor devices this material parameter also plays an important role. During the so-called wafer testing inside a wafer prober small probe tips are pressed onto the chip surface to check its performance. To prevent damaging the chip by that, the fracture toughness and load limit of it has to be defined in a prequalification step. This paper presents a test system that imitates the wafer testing process as close as possible and uses acoustic emission to detect appearing cracks and thereby also the load limit. The frontend of the test setup consists of a modular single needle probe card which can be placed in a wafer prober. Also, the indenter properties (tip diameter, stiffness, etc.) can be adjusted to the probe used later on during productive wafer testing to ensure realistic probing conditions. A piezoelectric sensor and a full strain gauge Wheatstone bridge are implemented close to the single indenter to measure the AEs and the applied contact force respectively. The signal-to-noise-ratios (SNRs) of both sensors are improved with an own analog amplifier module before recording them with an USB oscilloscope. A developed measurement software (LabVIEW) is used to adjust measurement parameters (trigger limit, record length, conversion factors, etc.) and automatically store and separate measurement data from different acoustic events and imprints. To evaluate the result files a second software tool (MATLAB) reads the files out and clusters the recorded events to separate crack signals from electrical and mechanical disturbances. With a prototype first test results are generated and the functionality and accuracy of the measurement concept is proven. KW - Acoustic Emission KW - Crack probability distribution KW - Fracture load limit KW - Wafer testing Y1 - 2024 U6 - https://doi.org/10.58286/30254 SN - 1435-4934 VL - 29 IS - 10 PB - NDT.net ER - TY - CHAP A1 - Shahab, Muhammad A1 - Ullah, Abdul Wahab Usman A1 - Shehzad, Muhammad A1 - Shah, Syed Bilal A1 - Joyo, M. Kamran A1 - Khan, Sheroz T1 - Optimal distributed generation placement in radial distribution system using particle swarm optimization T2 - 2024 IEEE 9th International Conference on Engineering Technologies and Applied Sciences (ICETAS) N2 - This paper addresses losses of power in Radial Distribution Systems (RDS), which significantly affect voltage levels and operational costs. The main aim is to optimize the positioning and size of Distributed Generation (DG) units, including Photovoltaic (PV) cells, and Wind Turbines (WT), to analyze the effect of DG placement in reducing the losses in power and enhancing the voltage profiles in radial distribution system (IEEE 33 bus system). This research employs Particle Swarm Optimization (PSO), a robust algorithm well-suited for tackling non-linear optimization issues in order to identify the appropriate placement and size for DG units. A number of scenarios with varying numbers of DG units are simulated, indicating significant reductions in active as well as reactive power losses. Likewise, the consistency and reliability requirements of modern distribution systems are improved as the voltage profile is improved. The key findings demonstrate that optimal DG integration enhances system efficiency, contributes to operational cost savings, and improves grid stability. PSO was chosen for its ability to effectively balance computational effort while achieving high accuracy in minimizing the losses associated with power and enhancing voltage profiles. In contrast to traditional optimization techniques, PSO offers superior accuracy and efficiency in addressing the challenges of non-linear optimization in RDS. KW - Radial Distribution System (RDS) KW - Distributed Generation (DG) KW - Particle Swarm Optimization (PSO) KW - Voltage Profile KW - Power Losses Y1 - 2024 U6 - https://doi.org/10.1109/ICETAS62372.2024.11120307 PB - IEEE ER - TY - JOUR A1 - Ortner, Martina A1 - Blümel, Edwina A1 - Lerner, Thomas A1 - Stiegler, Elisabeth A1 - Weger, Yannick A1 - Graf, Michaela A1 - Penn, Karolin A1 - Resch, Maximilian A1 - Riedl, Claudia A1 - Schnurrer, Stefanie A1 - Wilhelm, Lea A1 - Beer, Theresa A1 - Kökten, Rabia ED - Ortner, Martina T1 - BABS-Mi BT - Beiträge zur migrationssensiblen Sozialen Arbeit N2 - In dieser Ausgabe beschäftigen wir uns mit der Frage, was es heißt, einen so genannten Migrationshintergrund zu haben. Ist dieser wie ein Schatten, der die Person immer begleitet? Was bedeutet das für die Person? Wie reagiert das Umfeld? Im berufsbegleitenden Studiengang Soziale Arbeit (BABS) an der OTH Regensburg gibt es im neunten Semester eine Lehrveranstaltung mit dem Titel „Gesellschaft und Migration“ und im zehnten Semester mit dem Titel „Migrationssensible Soziale Arbeit“. Beide Lehrveranstaltungen haben jeweils einen zeitlichen Umfang von sechs Semesterwochenstunden. Die Studierenden gingen in beiden Veranstaltungen, also über zwei Semester, der Frage nach, ob durch Begriffe wie igrationshintergrund, Migrationsbiografie etc. Fremdheit konstruiert wird. Ist für die Person dieser Teil der Biografie oder der Familiengeschichte überhaupt relevant oder interessant? Und welche Bedeutung hat dieser Aspekt des Lebens für das Umfeld, z.B. der regelmäßige Besuch einer Ausländerbehörde zur Verlängerung des Aufenthaltes, die Kommentierung ihrer Deutschkenntnisse und/oder die Frage, wo sie denn eigentlich herkommen? Die Ergebnisse können Sie hier lesen. KW - Migration KW - Multikulturelle Gesellschaft KW - Sozialarbeit Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77073 VL - 5 PB - Ostbayerische Technische Hochschule Regensburg CY - Regensburg ER - TY - JOUR A1 - Markov-Glazer, Alon A1 - Elbe, Anne-Marie A1 - Schliermann, Rainer T1 - The use of psychological skills in deaflympic sport JF - European Journal of Adapted Physical Activity N2 - This study explores the use of psychological skills among Deaflympic athletes and aims to provide initial insights into sport psychology practices in this overlooked population. To this end, the frequency of psychological skills’ usage, usage patterns, and differences between subgroups were examined within this population. The Test of Performance Strategies (TOPS) was administered to 84 German Deaflympic athletes (mean age = 28; 27% female) along with biographical questions (e.g., hearing status). The findings indicate that Deaflympic athletes regularly utilize psychological skills in training and competition, displaying similar usage to that of Olympic athletes. However, only a minority of Deaflympic athletes train their skills with professional consultants. Additionally, relaxation techniques were employed rarely in comparison to the other investigated skills. This study’s findings contribute to the foundation of sport psychology research with Deaflympic athletes and underscore the need for a differentiated approach in tailoring interventions for this population. KW - Deaf culture KW - Deaflympian KW - psychological skills training KW - TOPS Y1 - 2024 U6 - https://doi.org/10.5507/euj.2024.012 VL - 17 IS - 15 PB - European Federation of Adapted Physical Activity CY - Olomouc ER - TY - CHAP A1 - Schermer, Detleff ED - Albert, Andrej T1 - Kapitel 7A: Mauerwerksbau T2 - Schneider Bautabellen für Ingenieure : mit Berechnungshinweisen und Beispielen Y1 - 2024 SN - 978-3-8462-1479-4 PB - Reguvis CY - Köln ET - 26. aktualisierte Auflage ER - TY - GEN A1 - Heese, Carl T1 - Ergänzende unabhängige Teilhabeberatung T2 - socialnet Lexikon KW - Inklusion KW - Behinderung Y1 - 2024 UR - https://www.socialnet.de/lexikon/Ergaenzende-unabhaengige-Teilhabeberatung PB - socialnet CY - Bonn ER - TY - CHAP A1 - Ried, Michael A1 - Neidhart, Thomas ED - Rackwitz, Frank T1 - Bodenverklebungen - wie elektrische Ströme das Adhäsionsverhalten bindiger Böden beeinflussen T2 - Vorträge zum 18. Hans Lorenz Symposium; 12.09.2024, Berlin N2 - In der Bauausführung und Maschinentechnik sieht man sich immerwährend mit Haft- und Reibkräften zwischen Stahloberflächen und bindigen Böden konfrontiert. Im (Spezial-)tiefbau und auch im Tunnelbau führt die Adhäsionsneigung bindiger Böden an Aushubwerkzeugen zu massiven wirtschaftlichen Einbußen der jeweiligen Baumaßnahme und ist mit großem energetischem Aufwand für die Reinigung der Werkzeuge verbunden. In den vergangenen Jahren wurde über den Einsatz eines elektrischen Gleichspannungsfeldes eine vielversprechende Lösung diskutiert. In den ersten labortechnischen Untersuchungen konnte dabei ein Zusammenhang von elektrischen Gleichspannungsfeldern und Scher- und Zugwiderständen zwischen Stahloberflächen und bindigen Böden herausgearbeitet werden. Vor dem Hintergrund der Vorbehalte gegenüber elektrischen Strömen wurde innerhalb dieser vorgestellten Arbeit die Stromstärke auf ein Minimum reduziert. Es sollte unter definierten Rahmenbedingungen der minimal nötige Stromfluss herausgefunden werden, unter dem der gewünschte Effekt einer Adhäsionsreduktion eintritt. Bisher wurden ausschließlich die Effekte an der Kathode untersucht, ergänzend hierzu wurde in einer ersten Analyse der Einfluss des elektrischen Stroms auf die Scher- und Zugwiderstände an der Anode qualifiziert. KW - Elektroosmose (electroosmosis), Elektrokinetik (electrokinetics), Adhäsion (adhesion), Ton (clay), bindiger Boden (cohesive soil), Verklebung (clogging), Scherwiderstand (shear resistance) Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-83847 ER - TY - GEN A1 - Hartmann, Julia A1 - Sattler, Florian T1 - Knowledge Nuggets in der Lehre KW - Knowledge Nuggets KW - Innovation in der Lehre Y1 - 2024 ER - TY - GEN A1 - Hartmann, Julia T1 - Der Einfluss verschiedener Lehr-Lern-Formate auf das studentische Engagement und die Entwicklung von Future Skills bei Studierenden KW - Future Skills KW - Lehr-Lern-Formate Y1 - 2024 ER - TY - BOOK A1 - Lukesch, Maximilian A1 - Kellner, Florian T1 - Übungsbuch Produktionswirtschaft : Planung, Steuerung und Industrie 4.0 N2 - Dieses Buch bietet Studierenden über 80 Übungsaufgaben und fünf Fallstudien inklusive ausführlicher Lösungen zu ausgewählten Themen der Produktionswirtschaft und Industrie 4.0. Jedes Kapitel enthält eine kurze Einleitung sowie zu erreichende Lernziele. Querverweise auf das Lehrbuch „Produktionswirtschaft“ von Kellner/Lienland/Lukesch erleichtern das Selbststudium und ermöglichen eine optimale Prüfungsvorbereitung. Die 3. Auflage wurde redigiert und um neue Rechenaufgaben sowie eine weitere Fallstudie zum Themenbereich Industrie 4.0 ergänzt. Y1 - 2024 SN - 978-3-662-68671-3 U6 - https://doi.org/10.1007/978-3-662-68672-0 PB - Springer Gabler CY - Berlin ET - 3., überarbeitete und erweiterte Auflage ER - TY - JOUR A1 - Kraft, Sarah Katharina A1 - Quayson, Matthew A1 - Kellner, Florian T1 - Assessing the German Act on Corporate Due Diligence Obligations in Supply Chains: a perspective from the smallholder cocoa farmer JF - Frontiers in Sustainability N2 - This research examines the potential outputs, outcomes, and impacts of the German Act on Corporate Due Diligence Obligations in Supply Chains (LkSG) on the smallholder cocoa farmers in West Africa. The study primarily relies on a literature review and an impact pathway to conduct a systematic analysis to identify the potential effects of the LkSG on smallholder cocoa farmers. The findings indicate that some, but not all of the risks addressed by the LkSG align with those faced by smallholder cocoa farmers and their families. Additionally, the research also reveals weaknesses, particularly in managing environmental risks, which the LkSG does not adequately cover. Our findings show that in the short- and medium-term, the LkSG has no potential effects on smallholder cocoa farmers. Furthermore, the potential positive impacts of the law on smallholder cocoa farmers will take a long time to realize, as the LkSG considers primarily tier-1 suppliers. Companies in Germany might reassess their supply chains to strive for an LkSG-risk-free supply chain, which could in the long term have sustained impacts on smallholder cocoa farmers. However, we recommend a comprehensive risk analysis of the cocoa supply chain to enhance the human rights of cocoa farmers. Y1 - 2024 U6 - https://doi.org/10.3389/frsus.2024.1376619 VL - 5 PB - frontiers ER - TY - JOUR A1 - Kellner, Florian A1 - Utz, Sebastian T1 - An inverse optimization approach for studying sustainability preferences in sourcing decisions JF - Journal of Cleaner Production N2 - Throughout many societies around the globe, there is growing awareness of the urgent need for the transition towards a sustainable economy. Research shows that buying firms have substantial leverage to initiate sustainable development by controlling the sustainable performance of their suppliers. In that context, this article presents a novel methodology based on inverse optimization to derive the implicit preferences of decision-makers in the trade-off between traditional sourcing objectives and sustainability in the supplier selection and order allocation process. The derived implicit preferences can then be used for further analyses to gain a better understanding of the characteristics of purchasing managers and sourcing situations that come with particularly high/low preferences placed on sustainability. Since the inverse optimization approach is computationally resource-intensive and consumes a significant amount of time, we present a scalable state-of-the-art cloud architecture that allows solving an arbitrary number of optimization programs in an acceptable amount of time. We demonstrate the feasibility of the proposed methodology in a real-world case. In doing so, we test how important sustainability aspects are in the supplier selection and order allocation decisions of one of the world's largest automotive parts manufacturers. KW - Inverse optimization KW - Order allocation KW - Sourcing decisions KW - Supplier selection KW - Sustainability Y1 - 2024 U6 - https://doi.org/10.1016/j.jclepro.2024.144305 VL - 483 PB - Elsevier ER - TY - JOUR A1 - Groten, Damian A1 - Ortner, Martina A1 - Rudolph, Clarissa T1 - Interdisziplinäre Untersuchungen der extremen Rechten in Bayern – Start des Forschungsverbundes ForGeRex JF - ZRex – Zeitschrift für Rechtsextremismusforschung Y1 - 2024 U6 - https://doi.org/10.3224/zrex.v4i2.08 SN - 2701-9624 VL - 4 IS - 2 SP - 266 EP - 268 PB - Verlag Barbara Budrich ER - TY - CHAP A1 - Amling, Jonas A1 - Scheele, Stephan A1 - Slany, Emanuel A1 - Lang, Moritz A1 - Schmid, Ute T1 - Explainable AI for Mixed Data Clustering T2 - Explainable AI for Mixed Data Clustering:Second World Conference, xAI 2024, Valletta, Malta, July 17–19, 2024, Proceedings, Part II N2 - Clustering, an unsupervised machine learning approach, aims to find groups of similar instances. Mixed data clustering is of particular interest since real-life data often consists of diverse data types. The unsupervised nature of clustering emphasizes the need to understand the criteria for defining and distinguishing clusters. Current explainable AI (XAI) methods for clustering focus on intrinsically explainable clustering techniques, surrogate model-based explanations utilizing established XAI frameworks, and explanations generated from inter-instance distances. However, there exists a research gap in developing post-hoc methods that directly explain clusterings without resorting to surrogate models or requiring prior knowledge about the clustering algorithm. Addressing this gap, our work introduces a model-agnostic, entropy-based Feature Importance Score for continuous and discrete data, offering direct and comprehensible explanations by highlighting key features, deriving rules, and identifying cluster prototypes. The comparison with existing XAI frameworks like SHAP and ClAMP shows that we achieve similar fidelity and simplicity, proving that mixed data clusterings can be effectively explained solely from the distributions of the features and assigned clusters, making complex clusterings comprehensible to humans. Y1 - 2024 SN - 9783031637964 U6 - https://doi.org/10.1007/978-3-031-63797-1_3 SN - 1865-0929 SP - 42 EP - 62 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Wissing, Julio A1 - Scholz, Teresa A1 - Saloman, Stefan A1 - Fargueta, Lidia A1 - Junger, Stephan A1 - Stefani, Alessio A1 - Tschekalinskij, Wladimir A1 - Scheele, Stephan A1 - Schmid, Ute T1 - SPECTRE: A Dataset for Spectral Reconstruction on Chip-Size Spectrometers with a Physics-Informed Augmentation Method T2 - 2024 IEEE SENSORS, 20-23 October 2024, Kobe, Japan N2 - Reconstructing usable spectra from an array of optical filters has been central to miniature spectrometers for many years. However, as optical sensors become more suitable for low-cost applications by exploiting sub-par filter characteristics, creating high-quality reconstructions has become increasingly challenging. There has been growing interest in data-driven reconstruction methods within the scientific community to address this issue. The main obstacle to progress in this area is the lack of publicly available and comprehensive datasets for spectral reconstruction. In our research, we propose a physics-informed data augmentation technique to significantly increase the size of datasets for spectral reconstruction and make our augmented dataset, containing 10117 samples, publicly available. Furthermore, we demonstrate the potential performance improvements achieved by training complex neural networks for spectral reconstruction using the augmented dataset. Our short benchmark indicates a performance increase of up to four times over the baseline. Y1 - 2024 U6 - https://doi.org/10.1109/SENSORS60989.2024.10784898 SP - 1 EP - 4 PB - IEEE ER - TY - JOUR A1 - Schiering, Nadine A1 - Eichstädt, Sascha A1 - Heizmann, Michael A1 - Koch, Wolfgang A1 - Schneider, Linda-Sophie A1 - Scheele, Stephan A1 - Sommer, Klaus-Dieter T1 - Modelling of measuring systems – From white box models to cognitive approaches JF - Measurement: Sensors N2 - Mathematical models of measuring systems and processes play an essential role in metrology and practical measurements. They form the basis for understanding and evaluating measurements, their results and their trustworthiness. Classic analytical parametric modelling is based on largely complete knowledge of measurement technology and the measurement process. But due to digital transformation towards the Internet of Things (IIoT) with an increasing number of intensively and flexibly networked measurement systems and consequently ever larger amounts of data to be processed, data-based modelling approaches have gained enormous importance. This has led to new approaches in measurement technology and industry like Digital Twins, Self-X Approaches, Soft Sensor Technology and Data and Information Fusion. In the future, data-based modelling will be increasingly dominated by intelligent, cognitive systems. Evaluating of the accuracy, trustworthiness and the functional uncertainty of the corresponding models is required. This paper provides a concise overview of modelling in metrology from classical white box models to intelligent, cognitive data-driven solutions identifying advantages and limitations. Additionally, the approaches to merge trustworthiness and metrological uncertainty will be discussed. Y1 - 2024 U6 - https://doi.org/10.1016/j.measen.2024.101503 SN - 2665-9174 PB - Elsevier BV ER - TY - CHAP A1 - Brandstetter, Manuela ED - Peer, Christian T1 - Empowerment - Wer ermächtigt wen nachhaltig? Ein Klärungsversuch T2 - Urbane Transformation durch soziale Innovation N2 - Empowerment bzw. Ermächtigung ist seit den 1980ern in internationalen und nationalen Diskursen als einflussreiches, transdisziplinäres Konzept quer zu wissenschaftlichen Disziplinen und gesellschaftlichen Funktionssystemen gut bekannt. Es thematisiert soziale Ungleichheiten und zielt auf deren Überwindung. Anhand eines konkreten Beispiels wird im folgenden Beitrag gezeigt, wie Empowerment-Ansätze implementiert werden und an ihren Ansprüchen auch scheitern können. In refeudalisierenden Praxen der Statuszuweisung zeigt sich, dass Ermächtigungsansätze auch ausschließend wirken und Ungleichheiten verschärfen können. Transformationsvorhaben aus Gemeinwohl‑Ökonomie, aus sozial-ökologisch nachhaltigem Handeln gleichermaßen wie aus regionaler und urbaner Planung mit Ermächtigungsanspruch können diesem Risiko aufsitzen, so die These dieses Beitrags. KW - Aushandlung KW - Gemeinwohl KW - Gerechtigkeit KW - Kapital KW - Soziales KW - Wirksamkeit Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-80767 SN - 978-3-85448-064-8_4 SP - 25 EP - 32 PB - TU Wien Academic Press CY - Wien ER - TY - JOUR A1 - Hille, Julia A1 - Brandstetter, Manuela A1 - Schulze, Mandy A1 - Keller, Samuel T1 - Rural areas and social work: Reflection on research in German-speaking countries JF - International Social Work N2 - Demographic change, securing social services, dealing with migration and agreeing to democratic participation are particularly rural challenges in Austria, Switzerland and Germany. Although social work is responsible for all these issues, there is a lack of a differentiated view. What exactly are rural areas? Who are the relevant actors in and for social work? As the social contexts are very different, research must differentiate and take into account the cultural and historical contexts of regional challenges. This article aims to strengthen the research perspective on rural areas and demonstrate their relevance in the discourse on social work. KW - Intergenerationality, rural areas, social capital, social work, space KW - rural areas KW - social capital KW - social work KW - space Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-80748 SN - 1461-7234 SP - 1 EP - 7 PB - Sage ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Verstärken von Betonbauteilen BT - Tragwerksplanung im Bestand N2 - Dieses Lehrbuch widmet sich dem Bauen im Bestand mit Betonbauteilen und den dabei häufig vorkommenden Verstärkungsmaßnahmen. Dazu wird zunächst das Sicherheitskonzept bestehender Bauteile erläutert. Darauf aufbauend wird die Analyse der Bestandsmaterialien und das Vorgehen bei einer Analyse des Tragverhaltens des Bestandsbauteils bzw. einer Nachrechnung behandelt. Die weiteren Kapitel des Buches beschäftigen sich mit dem Verstärken der bestehenden Betonbauteile. Hierbei werden alle gängigen Verstärkungen im Stahlbetonbau, wie das Verstärken mit geklebter Bewehrung, Carbonbeton, Betonschrauben und das Verstärken mittels Auf- und Spritzbeton, erklärt. Dabei werden bei allen Verfahren die Gemeinsamkeiten, die Unterschiede sowie die sinnvollsten Anwendungsgebiete herausgearbeitet. Die theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Die erfolgreiche Lektüre dieses Buches ermöglicht dem Lesenden, sich den tragwerksplanerischen Aufgaben von bestehenden Betonbauwerken zu stellen und Verstärkungsmaßnahmen zu berechnen. KW - Bestandsbeton KW - Bauen im Bestand KW - Bewertung KW - Verstärken KW - CFK-Lamellen KW - Carbonbeton KW - Sicherheitskonzept KW - Spritzbeton KW - Aufbeton KW - Sützenverstärkung KW - Schubverbinder KW - Betonschrauben KW - Biegeverstärkung KW - Querkraftverstärkung Y1 - 2024 SN - 9783658458560 U6 - https://doi.org/10.1007/978-3-658-45857-7 SN - 2524-8693 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER -