TY - CHAP A1 - Weber, Karsten ED - Grimm, Petra ED - Zöllner, Oliver T1 - Künstliche Intelligenz am Ende des Lebens BT - Szenarien des KI-Einsatzes zur Prognose und Gestaltung des Sterbens T2 - Ethik der Digitalisierung in Gesundheitswesen und Pflege: Analysen und ein Tool zur integrierten Forschung Y1 - 2025 SN - 978-3-515-13552-8 U6 - https://doi.org/10.25162/9783515135528 SP - 87 EP - 107 PB - Franz Steiner Verlag CY - Stuttgart ER - TY - BOOK A1 - Weber, Karsten ED - Weber, Karsten T1 - Künstliche Intelligenz und Kränkung BT - Der Verlust menschlicher Besonderheit N2 - Künstliche Intelligenz bringt psychosoziale Herausforderungen mit sich, insbesondere den Verlust der vermeintlichen menschlichen Einzigartigkeit, was unser Selbstbild als autonome Wesen infrage stellt. Karsten Weber beschreibt die Kränkung, die durch die Entwicklung und den Einsatz von KI verursacht wird. Das Denken über und Arbeiten mit KI ist eingebettet in Prozesse des Verfügbarmachens immer größerer Teile der Welt durch Technik, aber auch der gleichzeitigen und wiederholten Erfahrung einer Nicht-Besonderheit des Menschen. Exemplarisch erörtert der Autor Übergänge und Verluste – und setzt sie in den Kontext anderer globaler Herausforderungen, denen die Menschheit aktuell und in absehbarer Zukunft gegenübersteht. Er zeigt auf, wie Entwicklung und Einsatz von KI dazu beitragen, dass das insbesondere ›westliche‹ Selbstverständnis des Menschen auf individueller wie gesellschaftlicher Ebene unter Druck gerät. Wie kann ein konstruktiver Umgang mit KI aussehen? Wie können wir mit den Herausforderungen, die KI an uns stellt, gut umgehen? Y1 - 2025 SN - 978-3-8379-3393-2 U6 - https://doi.org/10.30820/9783837963465 PB - Psychosozial-Verlag CY - Gießen ER - TY - JOUR A1 - Weber, Karsten T1 - The Right to make fatal decisions JF - The American Journal of Bioethics Y1 - 2024 U6 - https://doi.org/10.1080/15265161.2024.2361903 SN - 1526-5161 VL - 24 IS - 8 SP - 127 EP - 128 PB - Taylor & Francis ER - TY - JOUR A1 - Schmiedt, Anja Bettina A1 - Cramer, Erhard T1 - Generalized Ng–Kundu–Chan model of adaptive progressive Type‐II censoring and related inference JF - Naval Research Logistics (NRL) N2 - The model of adaptive progressive Type‐II censoring introduced by Ng et al. (2009) (referred to as Ng–Kundu–Chan model) is extended to allow switching from a given initial censoring plan to any arbitrary given plan of the same length. In this generalized model, the joint distribution of the failure times and the corresponding likelihood function is derived. It is illustrated that the computation of maximum likelihood and Bayesian estimates are along the same lines as for standard progressive Type‐II censoring. However, the distributional properties of the estimators will usually be different since the censoring plan actually applied in the (generalized) Ng–Kundu–Chan model is random. As already mentioned in Cramer and Iliopoulos (2010), we directly show that the normalized spacings are independent and identically exponentially distributed. However, it turns out that the spacings themselves are generally dependent with mixtures of exponential distributions as marginals. These results are used to study linear estimators. Finally, we propose an algorithm for generating random numbers in the generalized Ng–Kundu–Chan model and present some simulation results. The results obtained also provide new findings in the original Ng–Kundu–Chan model; the corresponding implications are highlighted. Y1 - 2023 U6 - https://doi.org/10.1002/nav.22152 SN - 0894-069X VL - 71 IS - 3 SP - 389 EP - 415 PB - Wiley ER - TY - GEN A1 - Schmiedt, Anja A1 - Neumaier, Stefanie T1 - "Gamification trifft Hybride Lehre" : über ein Lehrprojekt in der mathematischen Statistik T2 - Tagungsband zum 5. Symposium zur Hochschullehre in den MINT-Fächern, Nuremberg (Germany), 21.-22.09.2023 N2 - Unter dem Titel „Gamification trifft Hybride Lehre“ wurde im Sommersemester 2023 ein Lehrprojekt im Fach Statistik des Studiengangs Wirtschaftsmathematik-Aktuarwissenschaften der Technischen Hochschule Rosenheim durchgeführt. Unterschiedliche hybrid-synchrone Lernsettings wurden in einem technisch entsprechend ausgestatteten Lehr-Experimentierraum mit den Studierenden erprobt. Als Ansatz zur Vor- und Nachbereitung der hybriden Lehre kam Gamification bzw. Gameful Motivation zum Einsatz. Im Lehrprojektteam mit Stefanie Neumaier wurde die hybride Lehre mittels der sog. EMPAMOS-Methode vorbereitet und reflektiert. Dabei ging es nicht darum, den spielfremden Kontext (die hybride Lehre) in ein Spiel zu verwandeln, sondern Spielelemente zur Zielerreichung einzusetzen. Die Auseinandersetzung mit hybriden Formaten wird dabei für Studierende und Lehrende als ein Zukunftsthema gesehen, nicht zuletzt für den Erwerb von Future Skills in einer Arbeitswelt, in der sich hybride Kollaboration etabliert. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-44356 SP - 159 EP - 166 PB - BayZiel CY - München ER - TY - JOUR A1 - Schmiedt, Anja Bettina A1 - Neumaier, Stefanie ED - Zinger, Benjamin ED - Wester, Ann Marie ED - Bröker, Thomas T1 - Über die strukturierte Entwicklung digitaler Lehr- und Lernformate mit EMPAMOS – Erkenntnisse aus einem Lehrprojekt JF - Hochschulbildung und Spiel : Lernen motivierend gestalten N2 - Der vorliegende Beitrag diskutiert ausgewählte Schlaglichter eines hybriden Lehr- und Lernprojektes, welches mithilfe von EMPAMOS als Analyse-, Gestaltungs- und Reflexionsinstrument entwickelt und begleitet wurde. Das Lehrprojekt verfolgte das Ziel, hybride und digitale Lehre in einem Kurs zur mathematischen Statistik durch Gamification motivational ansprechend zu gestalten. Hierfür wurde das hybride Lehr- und Lernlabor als ein veränderliches Spielfeld verstanden, mit welchem es umzugehen galt, um stets handlungsfähig zu bleiben und Studierende adäquat auf das Bestehen des Leistungsnachweises vorzubereiten. Dabei konnte die kooperative Spielform als ein zentrales Spielelement identifiziert werden, mit dem sich dieser Auftrag umsetzen ließ. Bei den Studierenden hatte jedoch das immanente motivationale Bedürfnis nach Kompetenzerleben die höchste Priorität. Y1 - 2025 UR - https://www.transcript-verlag.de/978-3-8376-7374-6/ SN - 978-3-8394-7374-0 SP - 121 EP - 136 PB - transcriptVerlag CY - Bielefeld ER - TY - CHAP A1 - Schmiedt, Anja A1 - Sussmann, Monika A1 - Klemcke, Joy ED - Zinger, Benjamin ED - Wester, Ann Marie ED - Bröker, Thomas T1 - Generative Künstliche Intelligenz und Mathematik in der Hochschullehre : ein Rendezvous zwischen Euphorie und Skepsis T2 - Hochschulbildung und Spiel : Lernen motivierend gestalten Y1 - 2025 UR - https://www.transcript-verlag.de/978-3-8376-7374-6/ SN - 978-3-8394-7374-0 SP - 269 EP - 284 PB - transcriptVerlag CY - Bielefeld ER - TY - GEN A1 - Kurapkat, Dietmar A1 - Piesker, Katja ED - Kurapkat, Dietmar ED - Piesker, Katja T1 - Wie forschen? Chancen und Grenzen der Bauforschung an Gebäuden nach 1950 BT - Bericht der Koldewey-Gesellschaft 50, Tagung vom 9. Bis 13. Mai 2018 in Braunschweig KW - Tagung der Koldewey-Gesellschaft KW - Historische Bauforschung Y1 - 2022 SN - 978-3959085137 PB - Thelem CY - Dresden ER - TY - GEN A1 - Esterlich, Jessica A1 - Kilchert, Hannah A1 - Rohmert, Nele A1 - Schöngart, Nathalie A1 - Weighart, Sonja A1 - Mertens, Johannis A1 - Pfingsten, Andrea T1 - Ist-Analyse der Dokumentation in physiotherapeutischen Praxen T2 - physioscience N2 - Einleitung: Mit der geplanten Einführung des elektronischen Rezepts für physiotherapeutische Heilmittelverordnungen ab 2027 wird die Digitalisierung im Gesundheitswesen weiter forciert. Digitale Dokumentationssysteme gelten als zentrale Voraussetzung für eine reibungslose Anbindung an die Telematikinfrastruktur. Ziel der Studie war es, zu untersuchen, wie Physiotherapeut*innen in ambulanten Physiotherapiepraxen die Effizienz, Akzeptanz und Verständlichkeit digitaler, analoger und hybrider Dokumentationssysteme sowie die erfassten Inhalte unter den gegebenen Rahmenbedingungen bewerten. Material und Methodik: Ein standardisierter Fragebogen wurde über SoSciSurvey entwickelt und zwei Wochen lang deutschlandweit verteilt. Die Fragen basierten auf Literatur und wurden mithilfe von Fünf-Punkte-Likert-Skalen beantwortet; Freitextangaben wurden inhaltsanalytisch ausgewertet. Die Analyse erfolgte deskriptiv und inferenzstatistisch mit SPSS. Für Effizienz, Akzeptanz und Verständlichkeit wurden Mediane und Interquartilsabstände berechnet. Gruppenunterschiede nach Nutzungsform wurden mittels Kruskal-Wallis-Test mit Bonferroni-korrigierten Post-hoc-Tests geprüft. Zusammenhänge wurden mithilfe von Spearman-Korrelationen untersucht. Zusätzlich wurde die Effektstärke berechnet. Ergebnisse: 173 Physiotherapeut*innen nahmen teil (Alter: M = 32,6 Jahre,SD = 11,1). 50,3 % nutzen digitale, 30,6 % analoge und 19,1 % hybride Systeme. 38,2 % gaben an, keine offizielle Dokumentationszeit zu erhalten. Digitale Systeme wurden signifikant besser bewertet als analoge, insbesondere hinsichtlich Effizienz (p < .001, r = .406), Akzeptanz (p < .001, r = .309) und Gesamtzufriedenheit (p < .001, r = .369); Unterschiede in der Verständlichkeit waren schwächer (p = .038, r = .189). Zwischen Effizienz und Gesamtzufriedenheit bestand ein sehr starker signifikanter Zusammenhang (ρ = .856, p < .001), ebenso zwischen Akzeptanz und Gesamtzufriedenheit (ρ = .729, p < .001) sowie zwischen Verständlichkeit und Gesamtzufriedenheit (ρ = .631, p < .001). Ein hoher Standardisierungsgrad korrelierte negativ mit allen Konstrukten (z. B. ρ = –.384, p < .001 für Effizienz). Mehr verfügbare Dokumentationszeit war positiv der Effizienz, Verständlichkeit und Gesamtzufriedenheit assoziiert (z. B. ρ = .226, p = .003 für Gesamtzufriedenheit). Mit wachsender Berufserfahrung wurden psychosoziale und kontextbezogene Inhalte häufiger dokumentiert (z. B. Kommunikation: ρ = .270, p < .001). Zusammenfassung: Die Ergebnisse verdeutlichen die Bereitschaft zur digitalen Dokumentation, weisen jedoch auf strukturelle Herausforderungen hin. Für eine erfolgreiche Digitalisierung sind benutzerfreundliche Systeme und praxistaugliche Rahmenbedingungen entscheidend. Digitale Systeme wurden in allen Kategorien signifikant besser bewertet als analoge. Interessenskonflikt: Es besteht kein Interessenkonflikt. KW - Physiotherapie KW - Forschungssymposium KW - FSPT Y1 - 2025 U6 - https://doi.org/10.1055/s-0045-1811301 SN - 1860-3092 VL - 21 IS - S 02 SP - S11 EP - S12 PB - Thieme ER - TY - GEN A1 - Bauer, S A1 - Branz, Clara A1 - Liepold, Franziska A1 - Schuster, A-L A1 - Schulze, Elke A1 - Pfingsten, Andrea T1 - Single-Task vs. Dual-Task: Altersunterschiede in Gleichgewicht und Kognition T2 - physioscience N2 - Einleitung: In vielen Alltagssituationen werden motorische und kognitive Aufgaben als Dual-Task (DT) bewältigt. Studien zeigen im DT Leistungseinbußen gegenüber dem Single-Task (ST). Vor diesem Hintergrund stellt sich die Frage, welche Rolle das Lebensalter spielt. Diese Studie untersuchte Unterschiede von Gleichgewicht und kognitiver Leistung zwischen ST und DT sowie Veränderungen im Alter. Material und Methodik: An der experimentellen Querschnittsstudie nahmen 32 gesunde Erwachsene (je 16 im Alter von 18–30 und 55–67 Jahren) teil. Konditionen und Pathologien, die das Gleichgewicht maßgeblich beeinträchtigen, galten als Ausschlusskriterien. Es wurden drei Testungen mit einer Dauer von jeweils 30 Sekunden mit je zwei Minuten Pause durchgeführt. Die ST-Aufgaben bestanden aus standardisiertem Einbeinstand (offene Augen) sowie Serial-Seven-Rechnungen. Die dritte Testung kombinierte beide Aufträge zu einer DT-Aufgabe. Als Outcome des kognitiven Tasks diente die Anzahl korrekt gelöster Rechenaufgaben. Das Moticon-OpenGo-Sensorsohlen-System erfasste während der motorischen Aufgabe das Gleichgewicht mittels Centre-of-Pressure-Pfadlänge (PL) und -Schwankgeschwindigkeit (SV). Die Prüfung der Normalverteilungsannahme der Daten erfolgte mittels Shapiro-Wilk-Test. In Abhängigkeit der Verteilung wurden Effektstärken und deren Signifikanz mit Hilfe des t-Tests – bei Nichterfüllung der Normalverteilung – des Mann-Whitney-U- oder Wilcoxon-Tests berechnet. Ergebnisse: Eine Analyse der Gesamtstichprobe ergab keinen signifikanten Unterschied bei kleiner Effektstärke zwischen ST und DT in PL (3,44 ± 1,06m zu 3,55 ± 0,94m; p = 0,161; d = 0,25) und SV (119,37 ± 33,96m/s zu 122,54 ± 36,12m/s; p = 0,117; r = 0,277). Die Veränderungen (DT minus ST) von jüngeren und älteren Erwachsenen zeigten in PL (0,07 ± 0,35m zu 0,16 ± 0,53m; p = 0,836; r = 0,037) und SV (2,34 ± 11,49m/s zu 4,01 ± 30,54m/s; p = 0,865; r = 0,030) keine signifikanten Abweichungen. Es ergaben sich weder in der Gesamtstichprobe noch altersgruppenspezifisch signifikante Unterschiede in der kognitiven Rechenleistung. Zusammenfassung: Klinisch betrachtet stellte die Kombination aus Einbeinstand und der kognitiven Aufgabenschwierigkeit in der vorliegenden Studie – analog zu den Ergebnissen vergleichbarer Studien – eine mäßige Anforderung dar, die bei gesunden Erwachsenen unterschiedlichen Alters keine signifikante kognitiv-motorische Interferenz hervorrief. Interessenskonflikt: Es besteht kein Interessenkonflikt. KW - Physiotherapie KW - Forschungssymposium Y1 - 2025 U6 - https://doi.org/10.1055/s-0045-1811309 SN - 1860-3092 VL - 21 IS - S 02 SP - S15 PB - Thieme ER - TY - CHAP A1 - Hammer, Pascal A1 - Mottok, Jürgen T1 - Prototyping for high-performance random number generators for critical systems T2 - 2025 International Conference on Applied Electronics (AE), 08-09. September 2025, Pilsen Czech Republic N2 - The security of modern cryptographic applications depends on the quality of their random number generators (RNGs). While physical true random number generators (PTRNGs) provide high-quality randomness, their performance is often insufficient for high-throughput applications. On the other hand, deterministic random number generators (DRNGs) offer better speed but lack true randomness. This paper presents an approach to developing a high-performance PTRNG. The research focuses on optimizing the digitization of analog noise signals. For this purpose, an ADC was selected that can digitize analog signals at a high clock rate. The functionality of the ADC could be verified by digitizing reference signals. Preliminary results by digitizing the analog noise signal demonstrates the feasibility of the proposed approach, but highlight challenges in achieving good results for Min-Entropy. Y1 - 2025 U6 - https://doi.org/10.1109/AE66163.2025.11197780 PB - IEEE ER - TY - CHAP A1 - Baumann, Timo A1 - Pohl, Martin A1 - Selgrad, Kai ED - Schäfle, Claudia ED - Dölling, Hanna T1 - Einführung und erste Evaluation des Selbstlernkonzepts CodeClinic an der OTH Regensburg T2 - Tagungsband MINT Symposium 2025. Zukunft MINT Lehre: Was bleibt? Was kommt? Was wirkt? N2 - Mit der CodeClinic wollen wir das Programmieren-Lernen – eine der großen Einstiegshürden in Informatik- und informatiknahen Studiengängen – in einen Prozess überführen, der das gemeinschaftliche Lernen in der Hochschullehre stärker als bisher in den Vordergrund rückt. Davon profitieren Studierende in ihrer fachlichen und persönlichen Entwicklung, und das Lernumfeld spiegelt die tatsächliche Realität der beruflichen Praxis besser wider. Wir unterstützen dieses Konzept durch einen für selbstgesteuertes und gemeinschaftliches Lernen ausgelegten SCALE-UP-Raum, den wir an der OTH Regensburg eingerichtet haben. In unserem Beitrag erläutern wir Konzept und Raum und liefern eine erste Evaluation zum Erfolg unserer Maßnahmen. KW - Hochschuldidaktik KW - Programmierung KW - Studieneingangsphase KW - SCALE-UP KW - Lernen durch Lehren (LdL) KW - BayernMINT Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86138 SN - 1612-4537 PB - BayZiel – Bayerisches Zentrum für Innovative Lehre CY - München ER - TY - GEN A1 - Zrenner, Louis ED - Zrenner, Louis T1 - Zeitweise, fließfähige Verfüllbaustoffe als Bettungsmaterial BT - Workflow zur Rezepturerstellung und Steuerung der Eigenschaften von Flüssigboden N2 - Der Ausbau des deutschen Höchstspannungsnetzes im Zuge der Energiewende erfordert zunehmend die Verlegung leistungsfähiger Erdkabelsysteme als Alternative zu Freileitungen. Großprojekte wieder SüdLink oder SüdOstLink in Deutschland stellen dabei zentrale Infrastrukturvorhaben dar, die zukünftig große Strommengen aus norddeutschen Windparks in süddeutsche Verbrauchszentren transportieren sollen. Nach Angaben der TransnetBW sollen allein für den Südlink bis zum Projektende rund 2400 Kilometer Erdkabel verlegt werden. Die Dimensionen dieser Mega-Projekte stellen die Geotechnik vor neue Herausforderungen und erfordern zur Sicherstellung der Betriebssicherheit eine Erweiterung der bisherigen Kompetenzfelder um das Verständnis des Wärmetransports im Boden. Besonders bei engen Trassenkorridoren mit geringem Kabelabstand, dem Kreuzen von wärmeemittierenden Bestandsleitungen oder Abschnitten mit großer Überdeckungshöhe werden hohe Anforderungen an die Wärmeleitfähigkeit der Bettung gestellt. Hierbei kommen vermehrt zeitweise fließfähige, selbstverdichtende Verfüllbaustoffe zum Einsatz, welche eine homogene und setzungsfreie Verfüllung, sowie hohe Reproduzierbarkeit der thermischen Eigenschaften bieten. Allerdings finden sich derzeit in geotechnische Normenwerken wie dem EC 7 lediglich in Verbindung mit Geothermie quantitativen Angaben zum Wärmetransport. Dies sorgt seitens der ausführenden Firmen für Unsicherheit hinsichtlich der geeigneten Maßnahmen zur Einhaltung der Schwellenwerte, welche von elektrotechnischen Sachverständigen im Zuge der Trassen- und Kabelplanung an die Wärmeleitfähigkeit der Kabelbettung gestellt werden. In dieser Arbeit soll beleuchtet werden, welche Schritte nötig sind, um vom Ausgangsmaterial zur hochwärmeleitenden Bettung als Systemkomponente einer kritischen Infrastruktur zu kommen. Zudem soll ein Workflow aufgezeigt werden, mit dem teils negativen Erfahrungen aus der Vergangenheit mit zu festem, nicht-wiederaushubfähigem Flüssigboden vermieden werden können. KW - Flüssigboden KW - CLSM KW - Thermische Bettung Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86385 CY - Regensburg ER - TY - GEN A1 - Ried, Michael A1 - Zrenner, Louis T1 - Feldversuch zu den Auswirkungen von In-Situ Langzeitbelastungen von KMR in ZFSV und Sandbettung BT - Anhand der Forschungsmessstrecke „Bypassleitung“ im Europaviertel in Frankfurt am Main N2 - Bei der Bypassleitung im Europaviertel Frankfurt handelt es sich um eine seit 2015 betriebene Forschungsmesstrecke zur messtechnischen Erfassung von Rohr-Boden-Interaktionen. Es wurden zwei identische Leitungen verlegt, welche jeweils einmal konventionell in Sand und einmal in ZFSV (zeitweise, fließfähiger, selbstverdichtender Verfüllbaustoff) gebettet wurden. Durch den Bypass betrieb unterlagen beide Leitungen identische, reguläre Betriebsbedingungen und konnten so miteinander realitätsnah miteinander verglichen werden. Vor Rückbau der Anlage wurden zusätzliche Temperaturzyklen mit erhöhten Vorlauftemperaturen bis 140°C gefahren. Anschließend wurden im Zuge des Rückbaus Gruben erstellt, in denen mithilfe einer Pressenhydraulik einzelne Rohrsegmente axial durch den Boden verschoben wurden. Somit konnten die mechanischen Boden-Rohr-Interaktionen gemessen und quantifiziert werden. KW - ZFSV (Zeitweise fließfähiger selbstverdichtender Verfüllbaustoff) KW - Fernwärme (district heating) KW - Frankfurt KW - Kontaktmechanik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85485 CY - Regensburg ER - TY - GEN A1 - Zrenner, Louis T1 - Modellierung des gekoppelten Wärme- und Wassertransports um Stromleiter in ZFSV-Bettung BT - Berechnung der thermo-hydraulischen Wechselwirkungen in Plaxis 2D anhand der Messergebnisse des DC CTL DBI Projekts N2 - Etwa 99% der Höchstspannungsübertragung findet in Deutschland über Freileitungen statt. Durch die dezentrale Energiegewinnung, welche aus dem Fokus auf regenerative Stromerzeugung resultiert, ist ein Ausbau des Übertragungsnetzes alternativlos – auch mit Hinblick auf den steigenden Strombedarf in den kommenden Jahrzehnten. Der Ausbau ist bereits beschlossene Sache, schreitet aber schleppend oder gar zu langsam voran. Die Gründe hierfür sind jedoch nicht Verzögerungen der Bauausführung, sondern vor allem Bürgerinitiativen gegen „Monstertrassen“, welche zu jahrelangen Planungs- und Genehmigungsphasen führen. Die Bürgerbewegungen gegen den Netzausbau sind meist mit auf dem Einfluss auf das Landschaftsbild, der Strahlungsbelastung oder Lärmbelästigung begründet. Erdkabel würden hinsichtlich dieser Probleme (trotz kurzfristiger Mehrbelastung während der Bauphase) eine Alternative darstellen, führen jedoch zu Blindleistungs-Problematiken und sehr breiten Kabelgräben. Diese Negativpunkte könnten durch eine Verwendung eines erdverlegten, gasisolierten Gleichstromübertragungssystems umschifft werden. An der TU Darmstadt wurde im Rahmen des Forschungsprojekts „DC-CTL DBI“ eine gasisolierte HGÜ-Leitung (GIL) einem Langzeitversuch unterzogen. Hierbei wurde die GIL teilweise erdverlegt um die Einflüsse der Abwärme auf einen ZFSV als Verfüllmaterial zu untersuchen. Auch wenn der ZFSV hinsichtlich seiner Beschaffenheit hervorragende Eigenschaften zur Verwendung als thermische Bettung mitbringt, so gibt es kaum Studien, welche eine langfristige Prognose der thermischen Stabilität erlauben. Als Folge gibt es auch kaum Berechnungsrichtlinien, welche eine realistische Bemessung und somit ein effizientes Betreiben der Trasse ermöglichen. Im Rahmen dieser Arbeit wurde versucht, eine FE-Berechnung mit Plaxis2D durchzuführen. Die Ergebnisse der Modellierung wurden hierbei stets durch die im Feldversuch verbaute Sensorik verifiziert. Häufig musste aufgrund mangelnder Kenntnis der Material- oder Einflussparameter auf Annahmen zurückgegriffen werden. Umso beeindruckender waren jedoch am Ende die Ergebnisse der Berechnung, welche häufig nur um wenige Grad von den Messwerten der Sensorik abwichen. Das zeigt, dass mit einer Kombination von labortechnischen Untersuchungen zur Ermittlung der Bodenparameter und einer FE-Modellierung die Dimensionierung und Bemessung einer solchen erdverlegten Trasse möglich ist. In dieser Arbeit wurden lediglich die thermischen und hydraulischen Entwicklungen und Einflüsse des Bodens berücksichtigt. Es ist aber durchaus möglich, Verformungen und Kräfte in die Berechnung zu integrieren und so ein ganzheitliches Berechnungsmodell zu erstellen. Hierbei steigen jedoch die Anforderungen an die Rechenleistung überproportional mit der Feinheit des Modells an Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85547 ER - TY - JOUR A1 - Thieme, Dorothea A1 - Linnemann, Birgit A1 - Mühlberg, Katja Sibylle A1 - Noppeney, Thomas A1 - Kreutz, Maria A1 - Thieme, Marcus T1 - Compression Therapy in Acute Deep Venous Thrombosis of the Lower Limb and for the Prevention of Post-Thrombotic Syndrome BT - A Review Based on a Structured Literature Search JF - Deutsches Ärzteblatt International N2 - Background: After an acute deep venous thrombosis (DVT) of the lower limb, 20% to 63% of patients develop post-thrombotic syndrome (PTS). In this review, we address the efficacy of compression therapy in the treatment of acute DVT of the lower limb, and for the prevention of PTS. Methods: 12 randomized controlled trials (RCTs) and one meta-analysis, with a total of 3751 patients, were identified in a structured literature search. Results: Two RCTs showed that adding compression therapy to drug treatment in the first 9 days of the acute phase of lower limb DVT led to more rapid pain relief (p<0.050) and less swelling (remaining difference in circumference, 1 cm versus 3 cm, p<0.050). As for the prevention of PTS, four RCTs showed a short-term benefit or no benefit of compression therapy. In three further RCTs, medical compression stockings (MCS) brought about a 16% to 27% absolute reduction of the frequency and severity of PTS (47% vs. 20 %, p<0.001; 40% vs. 21% (95% confidence intervals [29.9; 50.1] and [12.7; 29.5], respectively; and 58% vs. 42%, relative risk [RR] 0.73 [0,55; 0.96]). The benefit of MCS was also confirmed in a recent meta-analysis (RR 0.66 [0.44; 0.99], I2 = 88%). Thigh-length MCS were not superior to knee-length MCS for the prevention of PTS (33% vs. 36%, hazard ratio [HR] 0.93 [0.62; 1.41]). Individual, symptomoriented tailoring of the duration of treatment was not inferior to a fixed treatment duration of 24 months (29% vs. 28%; odds ratio [OR] 1.06 [0.78;1.44]). Conclusion: Compression therapy relieves symptoms in acute DVT and lessens the frequency and severity of PTS. It is therefore recommended as standard treatment. Y1 - 2024 U6 - https://doi.org/10.3238/arztebl.m2024.0001 VL - 121 IS - 6 SP - 188 EP - 194 CY - Berlin ER - TY - JOUR A1 - Barthel, Mareike A1 - Süß, Franz A1 - Dendorfer, Sebastian T1 - Application of a transformer encoder for the prediction of intra-abdominal pressure JF - Computer Methods in Biomechanics and Biomedical Engineering N2 - Intra-abdominal pressure is a significant physiological parameter influencing spinal stability and pelvic floor health. This study investigates the potential of a transformer encoder model to predict IAP using motion capture data and musculoskeletal modeling. Data from 211 subjects performing walking, fast walking, and running were used to train a transformer encoder. The model showed promising results with an overall Mean Absolute Percentage Error of 13.5% and a Pearson correlation coefficient of 0.85. Predictions for fast walking and running proved to be more challenging compared to walking, which was attributed to the greater variability and complexity of faster movements. KW - Intra-abdominal pressure KW - transformer encoder KW - machine learning KW - motion capture KW - musculoskeletal modeling Y1 - 2025 U6 - https://doi.org/10.1080/10255842.2025.2586143 N1 - Corresponding author der OTH Regensburg: Mareike Barthel PB - Taylor & Francis ER - TY - CHAP A1 - Marterer, Verena A1 - Muhr, Franz-Xaver A1 - Soukup, Radek A1 - Hipp, Susanne A1 - Blecha, Tomáš T1 - Material characterization using waveguide measurement technique for the development of textile antennas T2 - 2025 19th European Conference on Antennas and Propagation (EuCAP); 30. March - 04. April 2025, Stockholm, Sweden N2 - Significant advances in using conductive textiles have been made over the past two decades, particularly in knitted fabrics. The aim is to deepen understanding of how knitted structures, especially those with hybrid yarns containing fine conductive elements (microwires), interact with electromagnetic fields. To establish simulation models that align with subsequent measurements, it is crucial to determine the dielectric properties, specifically relative permittivity and loss tangent/conductivity. This research investigates whether knitted structures with hybrid yarns exhibit anisotropic permittivity, meaning different dielectric properties along orthogonal axes within the fabric plane. These properties were measured using a waveguide technique, whereby the structures were rotated by 90° to observe changes. The results demonstrate that the knitted structure exhibits metallic-like reflective behavior in one direction, while rotation leads to dielectric material characteristics. This effect is influenced by the number of conductive microwires and the materials used for these wires, such as silver-plated copper or bronze. KW - textile antennas KW - electromagnetic interaction KW - hybrid yarns KW - knitted structure KW - conductive textiles Y1 - 2025 SN - 978-88-31299-10-7 U6 - https://doi.org/10.23919/EuCAP63536.2025.10999278 PB - IEEE ER - TY - CHAP A1 - Marterer, Verena A1 - Soukup, Radek A1 - Hipp, Susanne A1 - Blecha, Tomáš T1 - Effective material approach for simulating knitted bowtie antennas T2 - 2025 6th International Conference in Electronic Engineering & Information Technology (EEITE); 4-6 June 2025, Chania Greece N2 - Textile antennas offer a promising solution for the integration of communication and sensor functions into wearable systems. Their flexibility, lightweight and seamless compatibility with garments make them ideal for wearable technology and medical monitoring applications. This paper investigates the characterization and simulation of a bowtie antenna made from knitted textile structures with hybrid yarns. These yarns, which consist of metallic microwires combined with textile threads, exhibit unique electromagnetic properties. The aim is to create a comprehensive simulation model using the effective material approach to reduce computational complexity while maintaining accuracy. Compared to a full three-dimensional simulation of the knitted structure, the effective material approach significantly reduces computational time and effort. Practical measurements were carried out in the frequency range from 3.3 GHz to 4.9 GHz to determine the dielectric properties of the materials. KW - Textile antennas KW - Electromagnetic simulation KW - Effective material KW - Waveguide measurement Y1 - 2025 SN - 979-8-3315-4419-5 U6 - https://doi.org/10.1109/EEITE65381.2025.11165995 PB - IEEE ER - TY - CHAP A1 - Richter, Stefanie ED - Middendorf, Tim ED - Parchow, Alexander T1 - (Er)Leben älterer Menschen in Alten-, Pflegeheimen und Wohnstiften : Zukunftsunsicherheit, Übergänge und Lebensalltag T2 - Ältere Menschen in prekären Lebenslagen : Theorien, Handlungsfelder und Fragestellungen für die Soziale Arbeit Y1 - 2025 SN - 978-3-7799-9123-6 U6 - https://doi.org/10.3262/978-3-7799-9123-6 SP - 467 EP - 481 PB - Beltz Juventa CY - Weinheim ER - TY - GEN A1 - Weber, Karsten T1 - Künstliche Intelligenz in der Verwaltung: Chancen und Risiken Y1 - 2025 ER - TY - JOUR A1 - Esper, Lukas A1 - Schultheiss, Ulrich A1 - Grad, Marius A1 - Noster, Ulf A1 - Bund, Andreas T1 - Application of the Hull Cell for Identifying Electropolishing Parameters to Adjust Surface Morphology in Additive Manufacturing JF - ECS Advances N2 - Additively processed materials are increasingly used to manufacture customized parts, e.g. medical implants. Implant surfaces often require a smooth finish, which can be achieved by post-processing and well-defined process parameters. In this study, the effects of electropolishing of metal parts produced by laser powder bed fusion are investigated using Hull cell experiments and a three-electrode setup. Current density voltage curves were measured with the three-electrode setup to identify the regimes for electropolishing. Subsequently different constant-currents were applied and Hull cell experiments were conducted. The surface roughness (Sz, Sa) and the mass removal were analysed. Surface morphologies were assessed using laser scanning and scanning electron microscopy. A reduction of the initial surface roughness of more than 90% to Sa < 0.3 μm has been achieved. Considering the passed electrical charge during electropolishing, results from Hull cell experiments are systematically correlated with current-controlled electropolishing. This approach enables the precise tailoring of polishing parameters to achieve surfaces with defined roughness. Furthermore, the study demonstrates the suitability of Hull cells in determining electropolishing parameters for additive materials and highlights their contribution to post-processing in additive manufacturing. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86295 SN - 2754-2734 N1 - Corresponding author der OTH Regensburg: Lukas Esper VL - 4 IS - 4 PB - The Electrochemical Society ER - TY - CHAP A1 - Rasp, Franziska A1 - Sahinbas, Burak A1 - Reisinger, Thomas A1 - Leitgeb, Erich A1 - Hipp, Susanne T1 - Polarization-based peak distortion mitigation for 5G sidelink positioning T2 - 2025 International Conference on Software, Telecommunications and Computer Networks (SoftCOM), 18-20 September 2025, Split, Coratia N2 - For cooperative driving both environmental perception and communication with other vehicles and the infrastructure are essential to avoid safety critical situations. The 5G Sidelink, as part of the Cellular Vehicle to Everything framework, enables both communication and, since 3GPP Release 18, positioning for distance estimation between vehicles. Due to the expected bandwidth limitations of 5G Sidelink in the Intelligent Transportation System band, combined with signal distortion caused by multi-path superposition, achieving submeter positioning accuracy is a significant challenge. Polarization diversity is investigated as a potential approach to mitigate errors resulting from signal distortion and subsequent peak shifts due to multi-path superposition. This work investigates the potential for reduced peak shift errors through the use of dual-polarized receive antennas. The received signals are processed using a polarization scan algorithm and compared to the accuracy achieved with single-antenna systems. The analysis is conducted using the Quasi Deterministic Radio Channel Generator framework with statistical Vehicle-to-Everything channel models. Simulation results show that polarization scan-based postprocessing reduces peak shifts and improves robustness in scenarios with polarization-mismatched antenna configurations. KW - Polarization Diversity KW - Antennas KW - Propagation KW - Positioning KW - 5G Sidelink Y1 - 2025 UR - https://ieeexplore.ieee.org/document/11197466 SN - 978-953-290-143-6 SN - 1847-358X PB - IEEE CY - Split ER - TY - JOUR A1 - Greiner, Nina A1 - Lauer, Norina A1 - Schedel, Valentin A1 - Pfingsten, Andrea T1 - Group rehabilitation for adults with acquired neurological disorders: A systematic review of mono- and interdisciplinary interventions in physical and speech-language therapy JF - PM&R N2 - Background: Group treatments and interdisciplinary collaboration are recommended in evidence-based guidelines for neurorehabilitation, including physical and speech-language therapy. Evidence suggests that activating overlapping neural networks for upper extremity motor control and speechlanguage processing produces synergistic effects during therapy. This systematic review aims to overview and appraise the efficacy of group treatments in traditional rehabilitation and telerehabilitation. In addition to summarizing evidence on monodisciplinary approaches in physical and speech-language therapy, it seeks data on integrative approaches involving one or both disciplines to inform further interdisciplinary collaboration. Methods: The review was registered with PROSPERO (CRD42021288012) and followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Systematic searches were conducted in PubMed, CINAHL, and the Cochrane Library. Two reviewers independently screened studies, extracted data, and assessed quality using AMSTAR 2, the Physiotherapy Evidence Database (PEDro) scale, or the Joanna Briggs Institute (JBI) Checklist, as appropriate. The evidence was summarized in a systematic narrative synthesis and its certainty rated based on the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach. Results: A total of 29 studies were included: 16 on speech-language therapy (861 participants) and 13 on physical therapy (1757 participants). No studies addressed interdisciplinary group interventions, and only two evaluated group telerehabilitation. Outcome domains and measures varied across studies and the certainty of evidence was predominantly low. However, moderate-certainty evidence supports that group speech-language therapy improves quality of life, communication, and language in stroke survivors, especially when interventions emphasize verbal production in communicative settings with multimodal materials and cueing. In physical therapy, circuit class training may be more effective than other group approaches for enhancing quality of life and mobility. Conclusion: Group treatments in neurorehabilitation show some benefits, but further research is needed – especially regarding interdisciplinary approaches and telerehabilitation. KW - Gruppentherapie KW - Logopädie KW - Physiotherapie KW - Neurologie KW - systematic review KW - group treatment KW - interdisciplinary collaboration KW - speech-language therapy KW - physical therapy Y1 - 2025 U6 - https://doi.org/10.1002/pmrj.70006 N1 - Corresponding author der OTH Regensburg: Nina Greiner PB - Wiley ER - TY - GEN A1 - Pfingsten, Andrea A1 - Bredehorst, Maren A1 - Müller-Winkler, Birgit A1 - Vogel, Barbara T1 - Physiotherapy as an Allied Health Profession – joint advocacy for the therapy sciences : development of an interdisciplinary position statement to highlight the research needs of the profession in Germany N2 - Develop an interdisciplinary position statement to establish common ground amongst the research community of AHPs in Germany to aid the academic discourse on research needs. KW - Physiotherapie KW - Wissenschaft KW - Forschung KW - Allied Health Profession Y1 - 2025 U6 - https://doi.org/10.82161/8c3r-sq40 ER - TY - RPRT A1 - Pfingsten, Andrea A1 - Bredehorst, Maren A1 - Leinweber, Juliane A1 - Richter, Robert A1 - Vogel, Barbara T1 - HVG-Positionspapier für die Therapiewissenschaften : Fachkommission Forschung im Hochschulverbunde Gesundheitsfachberufe (HVG) N2 - Zeitgemäße Therapie ist effektiv, effizient, patient*innen‐ und teilhabeorientiert. Ergotherapie, Logopädie/Sprachtherapie und Physiotherapie (im Folgenden kurz: ELP) sind gesellschaftlich relevant und essenzieller Bestandteil einer nachhaltigen Gesundheitsversorgung. Therapiewissenschaften evaluieren, verbessern und erweitern Möglichkeiten der Prävention und Behandlung von Krankheiten sowie der Beratung und Begleitung von Menschen in gesundheitlicher Hinsicht. Wer, wenn nicht die Therapeut*innen, stellt Forschungsfragen und verfolgt Forschungsinteressen, durch die forschungsbasiertes Wissen zu Therapie entsteht? Dieses Positionspapier der Fachkommission Forschung im HVG wurde entwickelt als Referenz zur Forschungslandschaft der ELP. Es ist als Argumentationshilfe gedacht, um die Voraussetzungen für die Therapiewissenschaften zu verbessern. KW - Allied Health KW - Physiotherapie KW - Wissenschaft Y1 - 2024 U6 - https://doi.org/10.5281/zenodo.14495900 ET - Version 1 (Stand 08.04.2024) ER - TY - GEN A1 - Pfingsten, Andrea A1 - Schedel, Valentin A1 - Dendorfer, Sebastian A1 - Gschoßmann, Lukas T1 - Biomechanical characteristics of knee rehabilitation exercises: a new approach for data-based exercise selection N2 - Purpose: The principal objective of our research is to characterize key exercises that represent significant milestones in the rehabilitation process, employing biomechanical parameters to facilitate the distinction between stages of progression. Methods: We conducted an observational cross-sectional study on healthy volunteers (30 years), approved by an ethics committee. Subjects with a history of lower extremity disease were excluded. Movement data was collected, including the following hierarchy of exercise progressions: sit-to-stand-supported (STSS) - sit-to-stand (STS) - squat, stair climbing supported (SCS) - stair climbing (SC) - step-up, single-leg-stance-supported (SLSS) - single-leg-stance (SLS) - single-leg-stance-advanced (SLSA). Motion data was captured using a marker-less system (CapturyLive, v255, TheCaptury, Germany) and used for musculoskeletal simulations in the AnyBody Modeling System (v7.4.4, AnyBodyTechnology, Denmark) with a full-body model. ANOVA or Welch-Test with Bonferroni Post-Hoc was used to describe the anterior-posterior joint reaction force (JRF) normalized for body weight (BW) for each exercise. Positive values indicate an anterior JRF, and negative values a posterior JRF. Results: We recruited 31 subjects (female: 23/74.2%) with a mean age of 22.81 years (SD:2.18). The analysis showed a significant difference in minimum JRF for STSS, STS, and squat (Welch-Test: F(2,56.421)=71.216, p0.001). Post-hoc analysis revealed that posterior JRF for STSS (mean:-2.63BW, SD:0.53) was lower than for STS (mean:-3.74BW, SD:0.42, p0.001), and STS was lower than squat (mean:-4.02BW, SD:0.35, p=0.043). No significant differences were observed in maximum JRF in the posterior direction (ANOVA: F(2,87)=1.151, p=0.324). For single-leg-stance exercises, the minimum JRF was similar for SLSS (mean:-0.34BW, SD:0.22) and SLS (mean:-0.55BW, SD:0.25, p=0.056), but higher in the posterior direction for SLSA (mean:-0.98BW, SD:0.49, p0.001; Welch-Test: F(2,54.379)=22.536, p0.001). Maximum JRF differences were also significant (ANOVA: F(2,87)=11.546, p0.001), with SLSS (mean:0.01BW, SD:0.22) showing a significant higher anterior JRF compared to SLS (mean:-0.16BW, SD:0.19, p=0.020). In the progression from SCS, SC to step-up, there was a significant difference in minimum JRF (ANOVA: F(2,87)=5.33, p=0.007), but not in maximum JRF (ANOVA: F(2,87)=0.624, p=0.538). SCS (mean:-3.42BW, SD:0.38) and SC (mean:-3.48BW, SD:0.54) showed no difference (p=1.000), but SC was significantly higher than step-up (mean:-3.58BW, SD:0.62, p=0.036). Conclusion(s): The exercises show differences in the JRF according to stages of progression, which can be taken into account when selecting exercises. Future research should address the group of patients who have undergone knee arthroplasty. Implications: In the future, it may be feasible to quantify patients' resilience based on sensor data and associate this with the optimal progression of an exercise sequence throughout the rehabilitation process. KW - Physiotherapie KW - Biomechanik KW - Rehabilitation KW - Knie KW - Physiotherapie Y1 - 2025 U6 - https://doi.org/10.82161/v9a4-yt39 ER - TY - GEN A1 - Ried, Michael A1 - Neidhart, Thomas T1 - Was lange währt ist auch gut: Langzeitverhalten von ZFSV BT - Anhand der Forschungsmessstrecke „Bypassleitung“ im Europaviertel in Frankfurt am Main N2 - Vollständige Prozessbegleitung alternativer bindemittelversetzter Bettungsmaterialien im Fernwärmeleitungsbau über Eignungsprüfung, Qualitätskontrolle, Statik KW - ZFSV (Zeitweise fließfähiger selbstverdichtender Verfüllbaustoff) KW - Fernwärme (district heating) KW - Eignungsprüfung (suitability test) KW - plastic concrete KW - Festigkeit (strength) Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85536 VL - 2025 CY - Regensburg ER - TY - GEN A1 - Ried, Michael T1 - ZFSV Festigkeitsindikatoren in situ und Probenentnahme BT - Anhand der Forschungsmessstrecke „Bypassleitung“ im Europaviertel in Frankfurt am Main N2 - Probennahme ungestörter ZFSV-Bettungsproben sowie in situ Festigkeitsindikator für zementversetzte niederfeste Baustoffe über den dynamischen CBR-Versuch KW - ZFSV (Zeitweise fließfähiger selbstverdichtender Verfüllbaustoff) KW - Fernwärme (district heating) KW - dynamischer CBR KW - Probennahme (sample extraction) KW - Festigkeit (strength) Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85496 VL - 2022 CY - Regensburg ER - TY - GEN A1 - Ried, Michael T1 - ZFSV Festigkeitsindikatoren in situ und Probenahme BT - Anhand der Forschungsmessstrecke „Bypassleitung“ im Europaviertel in Frankfurt am Main N2 - Festigkeit zeitweise fließfähiger Verfüllbaustoffe KW - ZFSV (Zeitweise fließfähiger selbstverdichtender Verfüllbaustoff) KW - Fernwärme (district heating) KW - dynamischer CBR KW - Probennahme (sample extraction) Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85521 VL - 2023 CY - Regensburg ER - TY - GEN A1 - Ried, Michael A1 - Neidhart, Thomas T1 - Electrical-and geotechnical engineering in soil physical symbiosis to influence the water conditions of cohesive soils N2 - In contrast to non-cohesive soils, the soil physical and, in particular, the soil mechanical properties of cohesive soils are directly dependent on the in-situ water content. The water content determines the consistency of the soil, the shear strength, and thus also the skin friction of geotechnical deep foundations. Furthermore, the settlement behavior of structures founded on cohesive soils is significantly influenced by the pore water. Given these water content-dependent properties, it is frequently of interest to influence the water content in cohesive soil. Due to the small capillary diameters and the surface charge of the silicate layers in cohesive soils, it is possible to effectively influence the pore water of the soil using electric fields. As early as the mid-20th century, attempts were made to initiate consolidation processes using electric currents (Casagrande, 1949). Building on this, Christian Veder, the namesake of this colloquium, and his colleague Hilbert presented various approaches in the 1970s regarding the electrokinetic processes involved in landslides and their utilization for stabilization. Due to electroosmosis in the capillaries of cohesive soils or soils with a cohesive component, the direct current electric field leads to water migration from the anode to the cathode. The water content at the anode therefore decreases, while it increases at the cathode. In this way, the water content-dependent consistency and shear strength of the soil can be specifically altered (Veder & Hilbert, 1979). Due to the strong dependence of the fine-grained minerals on the available ions, the soil is influenced by an electric field not only in its state but also in its soil physics. The investigations presented here aimed to deepen these insights and expand the range of applications of electric currents in soil. The focus was on electrokinetic pore water manipulation and its influence on the mechanical interaction (adhesion and tensile strength) between cohesive soils and solid surfaces. KW - Elektroosmose (electroosmosis) KW - Elektrokinetik (electrokinetics) KW - Konsolidation (consolidation) KW - Porenwasser (pore water) KW - Ionenhaushalt (ion household) Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85461 VL - 2025 CY - Regensburg ER - TY - CHAP A1 - Ried, Michael A1 - Neidhart, Thomas ED - Moormann, Christian ED - Vogt-Breyer, Carola T1 - Untersuchung elektroosmotischer Effekte auf Adhäsion und Gleitreibung eines bindigen Modellbodens: ein elektrisches Gleichspannungsfeld zur Veränderung der Mechanik zwischen Boden und Stahl T2 - 14. Kolloquium Bauen in Boden und Fels: Fachtagung über aktuelle Herausforderungen der Geotechnik, 30. + 31. Januar 2024, Esslingen N2 - In der Bauausführung und Maschinentechnik sieht man sich immerwährend mit Haft- und Reibkräften zwischen Stahloberflächen und bindigen Böden konfrontiert. Im (Spezial-)tiefbau und auch im Tunnelbau führt die Adhäsionsneigung bindiger Böden an Aushubwerkzeugen zu massiven wirtschaftlichen Einbußen der jeweiligen Baumaßnahme und ist mit großem energetischem Aufwand für die Reinigung der Werkzeuge verbunden. In den vergangenen Jahren wurde über den Einsatz eines elektrischen Gleichspannungsfeldes mehrfach eine vielversprechende Lösung diskutiert. Die durch den elektroosmotischen Effekt hervorgerufene Wasserdiffusion hin zur positiv geladenen Kathode führt zu einer signifikanten Reduktion der Adhäsion zwischen Stahloberfläche und bindigem Boden. Dabei wird die Haftspannung tangential wie auch senkrecht zur Werkzeugoberfläche durch elektrische Ströme beeinflusst. Innerhalb dieser vorgestellten Arbeit wurde ein Rotationsscherversuch entwickelt, mit dem die elektroneninduzierte Veränderung der mechanischen Interaktion zwischen Boden und Stahloberfläche systematisch untersucht und quantifiziert wurde. KW - Elektroosmose (electroosmosis), Elektrokinetik (electrokinetics), Adhäsion (adhesion), Ton (clay), bindiger Boden (cohesive soil), Verklebung (clogging), Scherwiderstand (shear resistance) Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-83839 SN - ISBN 978-3-381-11811-3 SP - 145 EP - 155 PB - expert CY - Tübingen ER - TY - CHAP A1 - Ried, Michael A1 - Piechullek, Amelie A1 - Neidhart, Thomas ED - Marte, Roman ED - Tschuchnigg, Franz T1 - Elektrotechnik und Geotechnik in bodenphysikalischer Symbiose zur Beeinflussung der Wasserverhältnisse in bindigen Böden T2 - Beiträge zum 39. Christian Veder Kolloquium - Wasser in der Geotechnik: Herausforderungen und Lösungen N2 - Im Gegensatz zu nichtbindigen Böden sind die bodenphysikalischen und im Besonderen die bodenmechanischen Eigenschaften bindiger Böden direkt vom Wassergehalt in situ abhängig. Der Wassergehalt bestimmt die Konsistenz des Bodens, die Scherfestigkeit und damit auch die Mantelreibung geotechnischer Tiefbauwerke. Daneben wird das Setzungsverhalten von auf bindigen Böden gegründeten Bauwerken maßgeblich durch das Porenwasser bestimmt. Vor dem Hintergrund der wassergehaltsabhängigen Eigenschaften ist es regelmäßig von Interesse das Wasser im bindigen Boden zu beeinflussen. Durch die kleinen Kapillardurchmesser und die Oberflächenladung der Silikatschichten bindiger Böden ist es möglich über elektrische Felder auf das Porenwasser des Bodens effektiv einzuwirken. Bereits in der Mitte des 20. Jahrhunderts wurde versucht, durch elektrische Ströme Konsolidationsprozesse anzustoßen (Cassagrande, 1949). Darauf aufbauend stellte der Namensgeber dieses Kolloquiums Christian Veder in den 1970er Jahren mit seinem Kollegen Hilbert verschiedene Ansätze zu den an Hangrutschungen beteiligten elektrokinetischen Prozessen und deren Nutzbarmachung zur Stabilisierung vor. Durch die Elektroosmose in den Kapillaren bindiger Böden oder Böden mit bindigem Anteil führt das elektrische Gleichspannungsfeld zu einer Wassermigration von Anode zu Kathode. Der Wassergehalt an der Anode nimmt daher ab und an der Kathode nimmt er zu. So lässt sich die wassergehaltabhängige Konsistenz sowie die Scherfestigkeit des Bodens gezielt verändern (Veder & Hilbert, 1979). Durch die starke Abhängigkeit der Feinkornminerale von den zur Verfügung stehenden Ionen wird der Boden durch ein elektrisches Feld nicht nur in seiner Zustandsform beeinflusst, sondern auch in seiner Bodenphysik. Die hier vorzustellenden Untersuchungen sollten die Erkenntnisse vertiefen und das Anwendungsspektrum elektrischer Ströme im Boden erweitern. Der Fokus lag hierbei auf der elektrokinetischen Porenwassermanipulation und deren Einfluss auf die mechanische Interaktion (Haftreibung und Haftzugfestigkeit) zwischen bindigen Böden und Festkörperoberflächen. KW - Elektroosmose (electroosmosis) KW - Elektrokinetik (electrokinetics) KW - Konsolidation (consolidation) KW - Porenwasser (pore water) KW - Ionenhaushalt (ion household) Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85452 SN - 978-3-903613-00-3 VL - Heft 21 PB - Nawi Graz Geocenter CY - Graz ER - TY - GEN A1 - Weber, Karsten T1 - Mögliche Zukünfte der Künstlichen Intelligenz Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Social challenges that (might) come from AI Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Transparenz aus praktischer und regulatorischer Perspektive: Ein Beitrag zur Technikfolgenabschätzung der KI? Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - KI und Sterben Just-in-Time BT - Wenn das Unwägbare voraussehbar und das Unvermeidliche beeinflussbar wird Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Der Mars zwischen Science und Fiction Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Mögliche Zukünfte der Künstlichen Intelligenz Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Medizin, Mobilität, Medien: Digitaler Wandel als Chance und Herausforderung Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - KI-Nutzung für (psychisch) kranke Menschen: Auswirkungen auf das Professionsverständnis der Fachkräfte Y1 - 2024 ER - TY - GEN A1 - Weber, Karsten T1 - Verantwortung als Leitprinzip der Arbeit der Gemeinsamen Ethikkommission der Hochschulen Bayerns (GEHBa) Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Driverless vehicles and software dependency: sustainability, security, and safety are at stake Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Elektrisch + digital = nachhaltig? Welche Nachhaltigkeitsgewinne haben neue Mobilitätformen? Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Der Mensch nach Maß?! Y1 - 2023 ER - TY - GEN A1 - Weber, Karsten T1 - Nachhaltigkeit ist (k)eine Frage der Philosophie Y1 - 2025 ER - TY - GEN A1 - Weber, Karsten T1 - „Ist da jemand?“ – Die Geschichte des Versuchs denkende Maschinen zu bauen Y1 - 2023 ER - TY - JOUR A1 - Weber, Karsten T1 - Die Geschichte der Künstlichen Intelligenz - eine Geschichte der Enttäuschungen JF - Evangelium und Wissenschaft : Beiträge zum interdisziplinären Gespräch Y1 - 2024 VL - 45 IS - 1 SP - 2 EP - 16 PB - Karl-Heim-Gesellschaft ER - TY - RPRT A1 - Kökten, Rabia T1 - Transnationale Organisationslogiken der extremen Rechten mit Türkeibezug in Bayern N2 - Bisher liegen keine Analysen aus organisationssoziologischer Perspektive über die extreme Rechte mit Türkeibezug vor. In diesem Arbeitspapier werden Normalisierungsstrategien im transnationalen Raum und vor Ort vorgestellt. Die extrem rechten Vereine platzieren sich als Interessenvertretung nach innen und nach außen hin. Hierbei zeigt sich, dass die Etablierung und Aufrechterhaltung einer kollektiven Identität zentral für ihr Bestehen sind. Sie operieren mit zwei binären Codes, die sie flexibel einsetzen: türkisch/nicht-türkisch und muslimisch/nicht-muslimisch. Diese müssen regelmäßig reproduziert und gefestigt werden. Das funktioniert über Differenz- und Feindbildkonstruktionen, die durch öffentliche Migrations- und Integrationsdebatten zusätzlich genährt werden, sowie durch starke regionale Vernetzungen, die bis in die Türkei reichen. Daran sind auch Klientel- und Mitgliederlegitimationen geknüpft, ohne die die Organisationen schnell zerfallen würden. Hier werden diese Vernetzungen als transnationale Lebenswelten beschrieben. Das vorliegende Working Paper stellt erste Ergebnisse zur Diskussion. KW - Transnationalismus KW - Rechtsextremismus KW - Ülkücü Bewegung KW - Organisationssoziologie Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84602 N1 - Das Forschungsprojekt ist Teil des Verbundes für Gegenwartanalysen, Erinnerungspraxis und Gegenstrategien des Rechtsextremismus in Bayern, ForGeRex. Es wird gefördert durch das Bayerische Staatsministerium für Wissenschaft und Kunst. CY - Regensburg ER - TY - CHAP A1 - Weber, Karsten A1 - Currle, Edda A1 - Frommeld, Debora A1 - Haug, Sonja ED - Samida, Stefanie ED - Glaser, Manuela ED - Franken, Lina T1 - Medizin T2 - Handbuch Materialität und Digitalität N2 - Medizinisches Handeln wird durch Digitalisierung verändert, weil sich der Fokus von Patient*innen hin zu Daten über Patient*innen verlagert. Dieser Prozess ist als Entmaterialisierung des Gegenstands der Medizin zu verstehen, da nicht mehr die Körper von Patient*innen selbst, sondern deren digitaler Zwilling im Zentrum des medizinischen Handelns stehen. Anhand von Beispielen aus dem Dreischritt von Anamnese und Diagnose, Behandlung und Therapie sowie Nachsorge und Pflege soll der Prozess von Digitalisierung und Entmaterialisierung der Medizin aufgezeigt werden. KW - Gesundheitsversorgung KW - Anamnese KW - Diagnose KW - Behandlung KW - Therapie KW - Nachsorge KW - Pflege KW - Digitaler Zwilling KW - Elektronische Patientenakte Y1 - 2025 SN - 9783662699874 U6 - https://doi.org/10.1007/978-3-662-69987-4_62-1 SP - 1 EP - 7 PB - Springer CY - Berlin, Heidelberg ER - TY - CHAP A1 - Klausmann, Leonard A1 - Rueckert, Tobias A1 - Rauber, David A1 - Maerkl, Raphaela A1 - Yildiran, Suemeyye R. A1 - Gutbrod, Max A1 - Palm, Christoph T1 - DIY challenge blueprint: from organization to technical realization in biomedical image analysis T2 - Medical Image Computing and Computer Assisted Intervention - MICCAI 2025 ; Proceedings Part XI N2 - Biomedical image analysis challenges have become the de facto standard for publishing new datasets and benchmarking different state-of-the-art algorithms. Most challenges use commercial cloud-based platforms, which can limit custom options and involve disadvantages such as reduced data control and increased costs for extended functionalities. In contrast, Do-It-Yourself (DIY) approaches have the capability to emphasize reliability, compliance, and custom features, providing a solid basis for low-cost, custom designs in self-hosted systems. Our approach emphasizes cost efficiency, improved data sovereignty, and strong compliance with regulatory frameworks, such as the GDPR. This paper presents a blueprint for DIY biomedical imaging challenges, designed to provide institutions with greater autonomy over their challenge infrastructure. Our approach comprehensively addresses both organizational and technical dimensions, including key user roles, data management strategies, and secure, efficient workflows. Key technical contributions include a modular, containerized infrastructure based on Docker, integration of open-source identity management, and automated solution evaluation workflows. Practical deployment guidelines are provided to facilitate implementation and operational stability. The feasibility and adaptability of the proposed framework are demonstrated through the MICCAI 2024 PhaKIR challenge with multiple international teams submitting and validating their solutions through our self-hosted platform. This work can be used as a baseline for future self-hosted DIY implementations and our results encourage further studies in the area of biomedical image analysis challenges. KW - Biomedical challenges KW - Image analysis KW - Blueprint KW - Do-It-Yourself KW - Self-hosting Y1 - 2025 SN - 978-3-032-05141-7 U6 - https://doi.org/10.1007/978-3-032-05141-7_9 SP - 85 EP - 95 PB - Springer CY - Cham ER - TY - JOUR A1 - Maerkl, Raphaela A1 - Rueckert, Tobias A1 - Rauber, David A1 - Gutbrod, Max A1 - Weber Nunes, Danilo A1 - Palm, Christoph T1 - Enhancing generalization in zero-shot multi-label endoscopic instrument classification JF - International Journal of Computer Assisted Radiology and Surgery N2 - Purpose Recognizing previously unseen classes with neural networks is a significant challenge due to their limited generalization capabilities. This issue is particularly critical in safety-critical domains such as medical applications, where accurate classification is essential for reliability and patient safety. Zero-shot learning methods address this challenge by utilizing additional semantic data, with their performance relying heavily on the quality of the generated embeddings. Methods This work investigates the use of full descriptive sentences, generated by a Sentence-BERT model, as class representations, compared to simpler category-based word embeddings derived from a BERT model. Additionally, the impact of z-score normalization as a post-processing step on these embeddings is explored. The proposed approach is evaluated on a multi-label generalized zero-shot learning task, focusing on the recognition of surgical instruments in endoscopic images from minimally invasive cholecystectomies. Results The results demonstrate that combining sentence embeddings and z-score normalization significantly improves model performance. For unseen classes, the AUROC improves from 43.9% to 64.9%, and the multi-label accuracy from 26.1% to 79.5%. Overall performance measured across both seen and unseen classes improves from 49.3% to 64.9% in AUROC and from 37.3% to 65.1% in multi-label accuracy, highlighting the effectiveness of our approach. Conclusion These findings demonstrate that sentence embeddings and z-score normalization can substantially enhance the generalization performance of zero-shot learning models. However, as the study is based on a single dataset, future work should validate the method across diverse datasets and application domains to establish its robustness and broader applicability. KW - Generalized zero-shot learning KW - Sentence embeddings KW - Z-score normalization KW - Multi-label classification KW - Surgical instruments Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85674 N1 - Corresponding author der OTH Regensburg: Raphaela Maerkl VL - 20 SP - 1577 EP - 1587 PB - Springer Nature ER - TY - CHAP A1 - Gerstner, Mathias A1 - Hackenberg, Rudolf T1 - Context-aware forecasting of mobile network quality for autonomous vehicle connectivity T2 - Vehicular analytics 2025 : the second conference on vehicular systems N2 - As autonomous driving becomes increasingly feasible, the German government has introduced a legal framework to enable the operation with Level 4 automated driving functionality. A key requirement is the maintenance of a continuous connection between such vehicles and a remote technical supervisor. If this link is lost, the vehicle must transition into a safe state by bringing itself to a controlled stop. To mitigate the risk of connection loss, accurate forecasting of mobile network availability along routes is essential. This paper presents an Exploratory Data Analysis (EDA) based on 38 measurement runs collected over ten months along a rural 64 km route in Germany. The dataset includes passive mobile network signal quality parameters, Global Navigation Satellite System (GNSS) position and precision data, as well as contextual features, such as speed, driving direction, day of the week, weather, and distance to the connected base station. Although mean values capture overall tendencies for areas with consistently good or poor coverage, they fail to capture the variability necessary for reliable prediction on a per-trip basis. Notably, some route segments show high variance in signal quality across different measurement runs. This variability is assumed to result from changing environmental influences, such as weather or traffic conditions at different times. Our analysis reveals weak but statistically relevant correlations between several contextual features (e.g., temperature ≈ -0.2) and network quality indicators. The inclusion of weather parameters or the day of the week has been shown to lower the Mean Absolute Error (MAE) compared to a prediction based only on measurements from the past. These findings underscore the importance of contextual information and localized modeling to predict network availability for safety-critical systems, such as autonomous vehicles. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86166 UR - https://www.thinkmind.org/library/VEHICULAR_ANALYTICS/VEHICULAR_ANALYTICS_2025/vehicular_analytics_2025_1_10_30005.html SN - 978-1-68558-320-0 PB - IARIA ER - TY - CHAP A1 - Bresinsky, Markus A1 - Brischar, Jule T1 - Between association and dissociation : the legitimacy politics of CIMIC experimentation N2 - NATO’s Concept Development and Experimentation (CD&E) works well for discrete technologies but is ill-suited to civil–military cooperation (CIMIC), where the ‘capability’ at stake is an interorganisational relationship. Drawing on regime-complex theory and organisational sociology, this paper argues that willingness to engage in joint CIMIC capability development hinges on legitimacy rather than technical utility. A legitimacy-scale metaphor captures the trade-off: functional gains from collaboration load one side; identity risks, such as threats to neutrality, autonomy, or safety, load the other. Three ideal-type cases test the framework. In stabilisation missions, humanitarian neutrality is vital, the scale tips toward identity risk, and co-creation remains siloed. In sudden-onset disasters, shared life-saving objectives reduce identity costs, functional incentives dominate, and integrated trials flourish. Territorial- and collective-defence scenarios occupy the middle ground: acute threat perception opens selective, often low-profile windows for cooperation, yet unresolved legal and reputational questions still temper overt collaboration. The analysis yields five practical lessons. First, legitimacy must be treated as a primary design variable. Second, the optimal depth of cooperation is context specific. Third, legitimacy-sensitive ‘safe-to-fail’ spaces – wargames, living labs, tabletop exercises – lower entry barriers. Fourth, structured reflection on legitimacy exposes red lines early and refines future joint efforts. Fifth, incremental processes can build trust and gradually relax legitimacy constraints. Recognising legitimacy as both constraint and resource allows practitioners to design CIMIC co-creation – and eventual experimentation – that is technically sound, politically acceptable, and ethically sustainable. KW - CIMIC KW - NATO KW - Legitimacy KW - Co-creation KW - Experimentation KW - Dissociation Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85627 UR - https://www.cimic-coe.org/wp-content/uploads/2025/07/acaCIMICs_publication.pdf PB - CCOE ER - TY - JOUR A1 - Bresinsky, Markus A1 - Fillenberg, Barbara T1 - Krisen, Katastrophen und Konflikte JF - Hebammen Wissen N2 - Hebammen als Akteurinnen im Bevölkerungsschutz In Deutschland folgt der Bevölkerungsschutz einer komplexen Struktur, die sich größtenteils auch auf das Rettungswesen stützt. Doch die wertvolle Ressource Hebammentätigkeit wurde dabei bisher nicht mitgedacht. Y1 - 2025 U6 - https://doi.org/10.1007/s43877-025-1335-x VL - 6 IS - 4 SP - 24 EP - 27 ER - TY - CHAP A1 - Baranowski, Kamil A1 - Zychla, Michał A1 - Krysztof, Michał A1 - Żółtowski, Michał A1 - Hausladen, Matthias A1 - Schreiner, Rupert A1 - Knápek, Aleksandr T1 - Experimenal method for studying electron beams in gaseous environments using a CMOS image sensor T2 - 38th International Vacuum Nanoelectronics Conference (IVNC) N2 - Detecting and analyzing electron beams in atmospheric conditions remains a significant challenge due to scattering and absorption of electrons by gas molecules. In this work, a novel approach using a CMOS image sensor for real-time electron beam detection after its transmission through air is presented. The setup enables visualization of beam divergence, emission profiles, and dynamic behavior under atmospheric pressure. Presented results demonstrate the potential of CMOS image sensor for electron beam analysis in gaseous environment. Y1 - 2025 SN - 979-8-3315-3705-0 U6 - https://doi.org/10.1109/IVNC65669.2025.11120851 PB - IEEE ER - TY - CHAP A1 - Allaham, Mohammad M. A1 - Burda, Daniel A1 - Knápek, Alexandr A1 - Krysztof, Michał A1 - Baranowski, Kamil A1 - Hausladen, Matthias A1 - Schreiner, Rupert T1 - Testing the performance of tungsten-graphite cathodes as MEMS Electron microscope electron source T2 - 38th International Vacuum Nanoelectronics Conference (IVNC) N2 - This work presents preliminary results of the performance testing of exfoliated graphene layers deposited on the nanotip of a tungsten field emission cathode. The obtained tungsten-graphite cathodes were then operated in a 3D-printed MEMS electron microscope testing model for later applications. The results were promising, where a maximum emission current of 50.2 μA was obtained with an extraction voltage of 1 kV and anode voltage of 3 kV. Y1 - 2025 U6 - https://doi.org/10.1109/IVNC65669.2025.11121041 PB - IEEE ER - TY - CHAP A1 - Asgharzade, Ali A1 - Bartl, Mathias A1 - Hausladen, Matthias A1 - Chen, Yang A1 - Buchner, Philipp A1 - Edler, Simon A1 - Bachmann, Michael A1 - She, Juncong A1 - Schreiner, Rupert T1 - Investigation on the influence of internal voltage drops on the emission behavior of silicon field emission arrays using CMOS image sensor T2 - 38th International Vacuum Nanoelectronics Conference (IVNC) N2 - In this paper we report on an improved measurement and analysis method for determining the emission current distribution of field emitter arrays with CMOS sensors. It can also be used for field emission arrays where not all surfaces of the emitters are at the same electrical potential (e.g. for p-doped Si tips, where a strong current saturation occurs). To demonstrate the functionality of this method, a n-doped field emission array was measured using a variable external series resistance. Brightness variations in emission spots were analyzed to re-calculate the known series resistances for comparison. The re-calculated value is in good agreement with the actual value of the resistance. This method offers a quantitative approach to assess internal voltage drop effects on field emission using optical readout KW - field emission imaging KW - field emission KW - CMOS sensor Y1 - 2025 U6 - https://doi.org/10.1109/IVNC65669.2025.11120937 PB - IEEE ER - TY - CHAP A1 - Eiler, Julian A1 - Berndt, Dominik A1 - Schreiner, Rupert T1 - Miniaturisierter Wasserstoffsensor basierend auf der 3-Omega Methode T2 - Tagungsband zum 4. Symposium Elektronik und Systemintegration ESI: 17. April 2024, Hochschule Landshut N2 - Die Arbeit stellt einen thermischen Wasserstoffsensor auf Siliziumbasis vor, der mit der 3-Omega Messmethode betrieben wird. Durch das dynamische Messverfahren, die große Sensoroberfläche bei gleichzeitig geringer thermischer Masse und der Materialkombination wird eine Auflösungsgrenze von 55 ppm Wasserstoff in Stickstoff erreicht. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-4205 SN - 978-3-9818439-9-6 SP - 38 EP - 45 PB - Hochschule für Angewandte Wissenschaften Landshut CY - Landshut ER - TY - CHAP A1 - Buchner, Philipp A1 - Hausladen, Matthias A1 - Bartl, Mathias A1 - Schreiner, Rupert T1 - Elektronenquellen basierend auf Feldemission aus Silizium T2 - Tagungsband zum 4. Symposium Elektronik und Systemintegration ESI: 17. April 2024, Hochschule Landshut N2 - Der Beitrag gibt einen Überblick über zwei typische Bauformen für Elektronenquellen auf der Basis von Feldemission aus Silizium. Des Weiteren wird eine typische Trioden-Beschaltung solcher Elektronenquellen für hohe Elektronentransmission vorgestellt und dabei auf ihre Leistungsfähigkeit eingegangen. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-4212 SN - 978-3-9818439-9-6 SP - 46 EP - 53 PB - Hochschule für Angewandte Wissenschaften Landshut CY - Landshut ER - TY - CHAP A1 - Galka, Stefan A1 - Weigert, Alexander T1 - Petri Net Structures for Automated Model Generation through Process Descriptions T2 - IFAC Papers OnLine N2 - Creating simulation models and running experiments requires expertise and significant effort. Modelling complex production systems by using Petri Nets, which have a simple formalism, leads to considerable modelling effort. To reduce the workload required, fundamental processes within a production system must be analyzed and represented as generic Petri Net structures to enable their automatic generation. These structures can serve as modular building blocks to construct arbitrarily complex systems. The broader objective is to enable the automatic generation of such, based on process descriptions within a simulation framework. Built on these findings, the necessary information for developing a specialized formal process description is derived, enabling the automated generation of Petri Net simulation models for production systems. KW - Digital Twin, Simulation, Logistics Y1 - 2025 U6 - https://doi.org/10.1016/j.ifacol.2025.09.093 VL - 59 IS - 10 SP - 542 EP - 547 PB - Elsevier ER - TY - CHAP A1 - Galka, Stefan T1 - Integration and usage of simulation-based digital twins in internal logistics systems T2 - IFAC Papers OnLine N2 - This paper presents the workflows of Digital Twins in practice, with reference to three case studies. The objective is to present the processing of data and information flow. The most essential requirements for the design of a Digital Twin are synthesized from the case studies and a layer model is presented, which was developed based on the three case studies. The model consists of four functional layers and an overarching data- and workflow-management-backbone. A front-end layer is proposed for communication with the end user. KW - Digital Twin, Simulation, Logistics Y1 - 2025 U6 - https://doi.org/10.1016/j.ifacol.2025.09.152 VL - 59 IS - 10 SP - 897 EP - 902 PB - Elsevier ER - TY - CHAP A1 - Galka, Stefan A1 - Meißner, Sebastian ED - Schmidt, Thorsten ED - Rank, Sebastian ED - Kühn, Mathias T1 - Einsatz von Digitalen Zwillingen für die operative Steuerung von innerbetrieblichen Transportsystemen T2 - Simulation in Produktion und Logistik 2025 N2 - This paper presents the architecture and functionality of a simulation-based Digital Twin designed to support decision-making in the control of internal transport systems. The developed Digital Twin leverages a wide range of data from operational information systems to predict future system loads. Specific methods for forecasting transport orders have been developed. An integrated simulation framework enables analysis of potential control decisions, such as resource allocation or the timing of order releases. The simulation results are used for multi-criteria evaluation of the available options for preventive action, thus, providing users with concrete recommendations to support their operational decision-making processes. KW - Digital Twin, Simulation, Logistics Y1 - 2025 SN - 978-3-86780-806-4 U6 - https://doi.org/10.25368/2025.280 SP - 47-1 EP - 47-11 PB - Technische Universität Dresden, Professur für Technische Logistik CY - Dresden ER - TY - CHAP A1 - Galka, Stefan A1 - Weigert, Alexander ED - Schmidt, Thorsten ED - Kühn, Mathias ED - Rank, Sebastian T1 - Systematik zur planungsbegleitenden Simulation bei der Konzeptplanung von Produktionssystemen – ein Anwendungsfall aus der Elektrolysestack-Produktion T2 - Simulation in Produktion und Logistik 2025 N2 - Simulation can support early-stage production system planning by enabling efficient evaluation of concept variants. However, detailed models are often impractical in concept phases due to limited data and high modelling effort. This paper presents a structured three-stage simulation approach for supporting the concept planning of water electrolyzer stack production systems . The approach leverages automatic model generation from formal process descriptions and gradually increases model detail across stages, carried out through a custom-developed simulation framework. This enables early validation of the throughput capability, resource planning, and the analysis of stochastically occurring technical malfunction. The method aims to reduce planning time while improving decision quality. KW - Produktion, Simulation, Petri-Netz Y1 - 2025 SN - 978-3-86780-806-4 U6 - https://doi.org/10.25368/2025.278 SP - 45-1 EP - 45-10 PB - Technische Universität Dresden, Professur für Technische Logistik CY - Dresden ER - TY - CHAP A1 - Ried, Michael A1 - Piechullek, Amelie A1 - Neidhart, Thomas T1 - Elektrotechnik und Geotechnik in bodenphysikalischer Symbiose zur Beeinflussung der Wasserverhältnisse in bindigen Böden T2 - Tagungsband Fachsektionstage Geotechnik N2 - Die bodenphysikalischen Eigenschaften bindiger Böden hängen direkt von dem Wassergehalt ab. Daher ist es regelmäßig von Interesse Einfluss auf die Wasserverhältnisse in bindigen Böden zu nehmen. Durch elektrokinetische Prozesse in den Kapillarporen kann der Wasserhaushalt des Bodens verändert werden. Durch neu entwickelte Laborversuche und deren Ergebnisse sollen die Anwendungsmöglichkeiten elektrokinetischer Verfahren in bindigen Böden aufgezeigt werden. So konnte gezeigt werden, dass sich die Konsolidationszeit durch eine starke Zunahme der Strö-mungsgeschwindigkeit in einem elektrischen Gleichspannungsfeld beschleunigen lässt. Es wurde zudem untersucht, wie sich der Wassergehalt und die damit verbundene Konsistenz eines Modell-bodens an Kathode und Anode verändert. KW - Elektroosmose (electroosmosis) Y1 - 2025 SN - 978-3-946039-13-6 SP - 369 EP - 374 CY - Essen ER - TY - GEN A1 - Dendorfer, Sebastian T1 - Towards a deeper understanding of Pelvic Floor Disorders via Biomechanical Models Y1 - 2025 ER - TY - GEN A1 - Dendorfer, Sebastian T1 - Zahlen statt Meinung – virtuelle Ganzkörpermodelle für die Mensch-Fahrzeug-Interaktion Y1 - 2025 ER - TY - CHAP A1 - Höng, Simon K. A1 - Wiederer, Jonas A1 - Eder, Friedrich A1 - Obergriesser, Mathias A1 - Linner, Thomas T1 - Towards AI-enhanced facade planning : integrating human expertise with machine learning-driven parametric modeling T2 - EC³ & CIB W78 : 2025 European Conference on Computing in Construction & 42nd CIB W78 IT in Construction Conference N2 - Planning modern facade systems is complex, requiring optimization across multiple domains.This paper proposes an AI-enhanced workflow for facade planning, harnessing computer vision and human input via a Large Language Model.A generative AI system then guides a parametric model to produce 3D facade designs. Automated checks provide feedback to a Reinforcement Learning system, to iteratively determine optimal solutions.These solutions are verified and finalized by human expertise, ensuring improved outcomes with reduce planning time and effort.The approach illustrates how combining advanced AI methods with human expertise can address the multifactorial challenges of facade design within current industry practices. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84862 SN - 978-9-083451-31-2 SN - 2684-1150 VL - 6 SP - 192 EP - 199 PB - European Council for Computing in Construction ER - TY - CHAP A1 - Westner, Markus A1 - Preiss, Niklas T1 - Unraveling jingle-jangle fallacies in digital assistant technologies : a comprehensive systematic review and research agenda T2 - Proceedings of tenth international congress on information and communication technology : ICICT 2025, London, Volume 9 N2 - Digital assistant technologies (DATs) such as chatbots, virtual assistants, and intelligent agents have gained widespread attention, yet inconsistent terminology remains a critical challenge. The fragmented nature of previous research has led to significant confusion due to overlapping and interchangeable use of terms across industries. This systematic literature review, following the PRISMA protocol, consolidates the current state of knowledge on DATs and addresses the prevalent jingle-jangle fallacies in their terminology. Analysis of 137 articles identified keycharacteristics, applications, and conceptual overlaps of various DATs, uncovering 39 distinct technologies categorized under three overarching concepts: assistants, chatbots, and agents. Despite shared functionalities, terminological inconsistencies persist across different sectors, presenting challenges for both academic research and practical implementation. This review emphasizes the need for standardized terminology and clearer classification frameworks to facilitate broader DAT adoption across organizational contexts. Y1 - 2025 U6 - https://doi.org/10.1007/978-981-96-6438-2_15 SP - 199 EP - 227 PB - Springer ER - TY - JOUR A1 - Gyokov, Ivan A1 - Seidl, Michaela A1 - Eschl, Sandra A1 - Meier, Christina A1 - Neufeld, Svetlana A1 - Feichtmeier, Manuela A1 - Freisleben-Nagl, Nadja A1 - Kluge, Sabrina A1 - Schmeller, Anna A1 - Ebenbeck, Sabrina A1 - Ostermeier, Selina A1 - Angermaier, Nadine A1 - Spindler, Tamara A1 - Winkelbeiner, Alexandra A1 - Ortner, Martina ED - Ortner, Martina T1 - BABS-Mi BT - Beiträge zur migrationssensiblen Sozialen Arbeit N2 - In dieser Ausgabe geht es um Transnationalismus. Die Einführung ist ein erklärender Artikel zum Themenbereich. Im Anschluss wird das methodische Vorgehen vorgestellt. Schließlich werden die einzelnen Ergebnisse dargestellt und abschließend zusammengefasst. KW - Migration KW - Multikulturelle Gesellschaft KW - Sozialarbeit Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85196 VL - 6 PB - Ostbayerische Technische Hochschule Regensburg CY - Regensburg ER - TY - GEN A1 - Wiesinger, Doris T1 - Langzeitmonitoring des bodenphysikalischen Materialverhaltens von ZFSV bei erdverlegten Stromrohren in ZFSV Bettung anhand des DC CTL DBI Projekts N2 - Langzeitmonitoring der Saugspannung, der Temperatur, der Wärmeleitfähigkeit und des Wassergehalts von zeitweise fließfähigen selbstverdichtenden Verfüllbaustoffen bei erdverlegten gasisolierten Übertragungsleitungen anhand des DC CTL DBI Projektes. Unter Realbedingungen ergaben sich annähernd konstante bodenphysikalische Eigenschaften während der gesamten Versuchslaufzeit. Die Wärmeableitung durch das Bettungsmaterial ist daher gegeben. Y1 - 2022 ER - TY - INPR A1 - Leusink, Florian A1 - Ried, Michael A1 - Spirkl, Florian A1 - Neidhart, Thomas T1 - Der dynamische CBR-Versuch : ein Festigkeitsindikator für Boden-Bindemittel-Gemische im Erd- und Tiefbau N2 - Bei der Eignungsprüfung für qualifizierte Bodenverbesserungen wird die benötigte Menge des Bindemittels mittels Anforderungen an die einaxiale Druckfestigkeit oder den CBR-Wert festgelegt. Gemäß dem Merkblatt über Bodenbehandlungen mit Bindemitteln (M BMB 2021) muss bei qualifizierten Bodenverbesserungen eine einaxiale Druckfestigkeit von mindestens 0,5 MPa bzw. ein CBR-Wert von mindestens 40 % nach 28Tagen erreicht werden. Eine Überwachung der einaxialen Druckfestigkeit ist in situ der Praxis nur schwer möglich, da die hierzu notwendige Bohrkernentnahme mit erheblichem Aufwand verbunden ist und durch die niedrige Druckfestigkeit des Boden-Bindemittel-Gemisches das Risiko besteht, dass Bohrkerne beschädigt werden oder eine Entnahme nicht möglich ist. Es gibt daher keine festgeschriebene Überwachung der einaxialen Druckfestigkeit bei der qualifizierten Bodenverbesserung, in der Praxis erfolgt die Qualitätsüberwachung meist durch eine Dichtekontrolle. Für Auftraggeber ist eine In-situ-Bestimmung der Festigkeit von besonderem Interesse, um eine zuverlässige Überwachung zu gewährleisten, gleichzeitig kann sie Auftragnehmern als Nachweis der erbrachten Qualität bei etwaigen Schäden und zur Absicherung in der Gewährleistungsphase dienen. So ermöglicht die in situ ermittelte Festigkeit den Nachweis, dass die Qualität der qualifizierten Bodenverbesserung den bei der Eignungsprüfung festgelegten Anforderungen entspricht, selbst bei variierenden Herstellungsverfahren, wechselnder Geologie und unterschiedlichen Lagerungsbedingungen. Eine regelmäßige Überwachung der In-situ-Festigkeit ist wichtig, um eine konstant hohe Qualität zu sichern. Eine alternative Methode zur Bestimmung der In-situ-Festigkeit stellt der dynamische CBR-Versuch nach TP Gestein-StB Teil 5.6 dar. Hierbei handelt es sich um einen Stempeleindringversuch, bei dem ein Stempel mit einem Durchmesser von 5 cm mithilfe einer stoßartigen Belastung durch das leichte Fallgewicht in den Boden gedrückt wird. Die hohen induzierten Spannungen von 3,60 MPa überschreiten dabei die Druckfestigkeit des Materials und führen zu einem Strukturbruch. Im Gegensatz zu statischen und dynamischen Lastplattendruckversuchen wird so die Festigkeit des Bodens abgebildet und nicht dessen Steifigkeit. In umfassenden Versuchsreihen wurden im Labor Boden-Bindemittel-Gemische hergestellt und nach 28 d an jeweils drei Teilversuchen die einaxiale Druckfestigkeit und an jeweils sechs Teilversuchen der dynamische CBR-Wert ermittelt. Zusätzlich wurden auf Baustellen dynamische CBR-Werte in situ ermittelt und Bohrkerne entnommen, um die einaxiale Druckfestigkeit im Labor zu bestimmen. Die Versuchsreihen ermöglichten es, eine Korrelation zwischen den beiden Kennwerten abzuleiten. Durch diese Korrelation kann nun anhand des in situ ermittelten dynamischen CBR-Wertes auf die einaxiale Druckfestigkeit geschlossen werden. Dies ermöglicht eine einfache Qualitätsüberwachung, die über die bloße Ermittlung der Dichte hinaus geht und mit minimalem Zeit- und Kostenaufwand verbunden ist. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85221 ER - TY - JOUR A1 - Kellner, Florian A1 - Kraft, Sarah Katharina A1 - Quayson, Matthew T1 - Sustainable supplier evaluation under due diligence acts JF - Frontiers in Sustainability N2 - The enactment of due diligence legislation, such as the German Act on Corporate Due Diligence Obligations in Supply Chains, in German Lieferkettensorgfaltspflichtengesetz (LkSG), is reshaping global supply chain management by compelling companies to tackle heightened human rights and environmental risks in their supply chain. This study addresses the need for a comprehensive sustainability supplier evaluation framework by employing a systematic literature review with an expert survey of practitioners from German companies subject to LkSG. This methodology aligns academic findings with real-world practice and legal requirements, enriching the literature with practical insights. The results reveal that business practice prioritizes economic and social dimensions, whereas the literature focuses on economic and environmental dimensions. Although the most relevant economic and environmental criteria are consistent across both domains, the key social criteria show a notable misalignment. Managers can utilize the most relevant sustainability supplier evaluation criteria identified in this study to promote sustainable supply chains and ensure compliance with due diligence requirements. This research also highlights the high relevance of human rights as a social criterion, a dimension that has been historically under-recognized or implicitly addressed in the literature. KW - supplier evaluation KW - supplier selection KW - sustainability criteria KW - due diligence KW - high-risk suppliers KW - supply chain act KW - human rights Y1 - 2025 U6 - https://doi.org/10.3389/frsus.2025.1677700 VL - 6 PB - Frontiers ER - TY - INPR A1 - Spirkl, Florian A1 - Neidhart, Thomas T1 - Nachhaltige Bauverfahren durch Verwendung des anstehenden Bodens am Beispiel von Dichtwänden und Rohrgrabenverfüllung N2 - Der „Earth Overshoot Day“ verdeutlicht, dass wir zu viele Ressourcen verbrauchen und es immer noch großen Handlungsbedarf gibt, um nicht weiterhin auf Kosten zukünftiger Generationen zu leben. Dabei spielt der Bausektor eine große Rolle, entstehen hier doch ein erheblicher Anteil der deponierten Abfälle (ca. 55 % in DE), der CO2-Emissionen (ca. 36 % in der EU) und des Energieverbrauchs (ca. 40 % in der EU). Ein „Weiter so“ wie bisher ist unter diesen Aspekten nicht zielführend. Es braucht daher innovative Ansätze für Baustoffe, Bauprodukte und Bauweisen. Im Beitrag wird aufgezeigt, wie durch innovative Ansätze der Bausektor nachhaltiger gestaltet werden kann. Dies erfolgt anhand zweier Beispiele, bei der eine Dichtwand und eine Rohrgrabenverfüllung betrachtet werden. Zunächst wird am Beispiel der Dichtwand der CO2-Fußabdruck einer klassischen Dichtwand, hergestellt als Spundwand, verglichen mit dem Verfahren der Fräsmischinjektion. Da der Baugrund selbst als Baustoff genutzt wird und kein Bohrgut anfällt, wird hierdurch im Sinne des Kreislaufwirtschaftsgesetzes „Abfall“ vermieden. Gleichzeitig entfallen hierdurch eine Vielzahl an Materialtransporten. Am Beispiel der (Rohr-)Grabenverfüllung wird aufgezeigt, wie sich unterschiedliche Innovationsgrade auf die Nachhaltigkeit eines Bauverfahrens auswirken. Hierfür wird als Ausgangssituation die Bettung und Verfüllung eines Rohrgrabens mittels Sand betrachtet. Als Alternative hierzu werden zeitweise fließfähige selbstverdichtende Verfüllbaustoffe (ZFSV) betrachtet. ZFSV werden aus einer Grundkomponente (Boden, Baustoffe, Recycling-Stoffe) hergestellt, welche mit Wasser, Bindemittel und ggf. Zusätzen versetzt werden. Durch die Erhöhung des Wassergehalts erhalten die ZFSV ihre fließfähigen selbstverdichtenden Eigenschaften. Anschließend wird das Wasser durch das Bindemittel und die ggf. verwendeten Zusätze teilweise gebunden, so dass i.d.R. bereits wenige Stunden nach der ZFSV-Verfüllung die Begehbarkeit und nach einem Tag die Überbaubarkeit gewährleistet ist. Das Bindemittel wird dabei je nach Anwendungszweck dosiert. Zur Verwendung als Bettungsmaterial von Leitungen wird i.d.R. eine zeitabhängige, maximale Druckfestigkeit des ZFSV definiert und damit auch die Menge des Bindemittels begrenzt. Meist wird ein hydraulisch abbindendes Material (z.B. Zement) verwendet. Weitere allgemeine Angaben zum Thema ZFSV finden sich z.B. in Neidhart, Spirkl (2022), Bont (2022), Ramler (2022), Wagner (2022), Wiesinger (2022). Die Herstellung von ZFSV kann in einem Werk (Mixed in Plant) oder vor Ort (Mixed on Site) geschehen. Als Ausgangsmaterial kann Sand, Recyclingmaterial oder, wenn die Eignung nachgewiesen wird, auch das Aushubmaterial vor Ort verwendet werden. Das Potenzial einer nachhaltigen Bauweise durch eine ZFSV-Bettung wird im Beitrag in 4 verschiedenen Szenarien anhand eines realen Bauprojekts in Kelheim betrachtet: 1. Verwendung von Sand-basiertem ZFSV anstelle Sand-Bettung 2. Verwendung von Recyclingmaterial-basiertem ZFSV 3. Verwendung des anstehenden Aushubmaterials zur ZFSV-Herstellung 4. Optimierung des Grabenquerschnitts und Bauablaufs Grundsätzlich wurde bereits nachgewiesen, dass die Verwendung von ZFSV als Bettungsmaterial zu einem beschleunigten Bauablauf führen kann, und die Kosten je nach Randbedingung vergleichbar zur Sand-Bettung sind. Mit den dargestellten Szenarien, deren Einfluss auf die Nachhaltigkeit der Baustelle von 1. bis 4. zunimmt, zeigt sich auch in diesem Bereich das Potenzial von ZFSV. Je nach Ausgangsmaterial und Ort der ZFSV-Herstellung kann Material (Sand) und Transporte eingespart, die zu deponierende Menge reduziert und die Ökobilanzierung im Gesamten verbessert werden. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85216 ER - TY - JOUR A1 - Schultz, Maximilian A1 - Hauer, Franziska A1 - Haug, Sonja A1 - Weber, Karsten T1 - Künstliche Intelligenz in sozialen Organisationen implementieren BT - von der Einzelinitiative zur Strategie JF - Sozialwirtschaft N2 - Die Digitalisierung wird in der Gesellschaft seit vielen Jahren thematisiert. Durch Künstliche Intelligenz (KI) hat diese Diskussion einen zusätzlichen Anstoß bekommen. Inbesondere für gemeinwohlorientierte Organisationen bieten sich Potenziale sowie Risiken. Sie könnten zur Entlastung von Fachkräften, zur Verbesserung organisatorischer Abläufe und zur Entwicklung neuer Unterstützungsangebote beitragen. Angesichts chronischer Herausforderungen wie Fachkräftemangel, Ressourcenknappheit und wachsender Komplexität von Arbeitsprozessen erscheint KI daher als möglicher Hebel für eine tiefgreifende Transformation. KW - KI KW - Sozialwirtschaft Y1 - 2025 U6 - https://doi.org/10.5771/1613-0707-2025-5-35 VL - 35 IS - 5 SP - 35 EP - 38 PB - nomos Verlag ER - TY - JOUR A1 - Richter, Stefanie T1 - Ein Essay zur Bedeutung der qualitativ-interpretativen Forschung zur wissenschaftlichen Fundierung der Pflege JF - Pflege & Gesellschaft Y1 - 2025 U6 - https://doi.org/10.3262/PUG2503290 SN - 1430-9653 VL - 30 IS - 3 SP - 290 EP - 295 PB - Beltz Juventa ER - TY - JOUR A1 - Reicheneder, Matthias A1 - Westner, Markus A1 - Matschi, Markus T1 - IT nearshoring and offshoring in German large companies: current status, motives and selection criteria N2 - This study analyses current IT nearshoring and offshoring practices in large German companies. For this purpose, 33 CIOs and IT managers were interviewed. Due to the shortage of skilled labour in Germany, the main driver behind the geographical relocation of IT services abroad is the availability of resources in other countries. This also applies to the selection of suitable IT services for nearshoring and offshoring. While IT near- and offshoring was historically initiated primarily due to cost savings, this aspect plays a subordinate role today. Although the interviewees still see cost savings as a benefit, they expect this advantage to erode in the future due to the narrowing gap in international cost differences. Companies are mainly offshoring application services but are increasingly recognising the potential to have higher-value tasks, e.g. project management and enterprise architecture management, performed from geographically more distant countries. Companies that only engage in IT nearshoring provide less than a third of their IT services in this way. Companies with IT offshoring presences have a higher degree of IT nearshoring/offshoring and perform almost half of their IT services abroad using their own resources. The most popular countries are Portugal for nearshoring and India for offshoring. KW - Nearshoring KW - Offshoring KW - IT Services KW - Drivers KW - Selection Criteria KW - Large Companies KW - Study Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85311 N1 - This document is an English translation of the article: Reicheneder, M., Westner, M. & Matschi, M. IT-Near- und Offshoring in deutschen Großunternehmen: Aktueller Stand, Motive und Auswahlkriterien. HMD (2025). https://doi.org/10.1365/s40702-025-01150-2 N1 - Die deutsche Originalveröffentlichung ist abgelegt unter: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/start/0/rows/10/sortfield/score/sortorder/desc/searchtype/simple/query/IT-Near-+und+Offshoring+in+deutschen+Gro%C3%9Funternehmen%3A+Aktueller+Stand%2C+Motive+und+Auswahlkriterien/docId/7958 CY - Regensburg ER - TY - JOUR A1 - Bartzsch, Nikolaus A1 - Rösl, Gerhard A1 - Seitz, Franz T1 - Cash demand in times of crises: a global perspective JF - Bank & Credit N2 - We analyse the repercussions of different kinds of crises on cash demand in an international perspective. Our case studies are based on time series of banknotes in circulation in a selection of 16 countries and currency areas across all continents over the period from 1990 to 2022. We distinguish between six different kinds of crises: (1) uncertainty of the digital infrastructure, (2) confidence crises of the financial system, (3) natural disasters, (4) political crises, (5) inflationary crises, and (6) exchange rate crises. Our case studies suggest that crises are likely to have contributed to the dynamic growth in demand for banknotes in the countries analysed. This applies both to small and large banknote denominations. Y1 - 2025 U6 - https://doi.org/10.5604/01.3001.0054.9611 VL - 56 IS - 01 SP - 1 EP - 44 PB - Index Copernicus CY - Warsaw ER - TY - JOUR A1 - Tremmel, Florian A1 - Nagler, Oliver A1 - Kutter, Christoph A1 - Holmer, Rainer T1 - Mechanical robustness analysis of semiconductors with a single needle probe card using acoustic emissions JF - e-Journal of Nondestructive Testing N2 - The combination of indentation testing and acoustic emission (AE) is widely used to analyze the fracture toughness of test substrates. In the manufacturing of semiconductor devices this material parameter also plays an important role. During the so-called wafer testing inside a wafer prober small probe tips are pressed onto the chip surface to check its performance. To prevent damaging the chip by that, the fracture toughness and load limit of it has to be defined in a prequalification step. This paper presents a test system that imitates the wafer testing process as close as possible and uses acoustic emission to detect appearing cracks and thereby also the load limit. The frontend of the test setup consists of a modular single needle probe card which can be placed in a wafer prober. Also, the indenter properties (tip diameter, stiffness, etc.) can be adjusted to the probe used later on during productive wafer testing to ensure realistic probing conditions. A piezoelectric sensor and a full strain gauge Wheatstone bridge are implemented close to the single indenter to measure the AEs and the applied contact force respectively. The signal-to-noise-ratios (SNRs) of both sensors are improved with an own analog amplifier module before recording them with an USB oscilloscope. A developed measurement software (LabVIEW) is used to adjust measurement parameters (trigger limit, record length, conversion factors, etc.) and automatically store and separate measurement data from different acoustic events and imprints. To evaluate the result files a second software tool (MATLAB) reads the files out and clusters the recorded events to separate crack signals from electrical and mechanical disturbances. With a prototype first test results are generated and the functionality and accuracy of the measurement concept is proven. KW - Acoustic Emission KW - Crack probability distribution KW - Fracture load limit KW - Wafer testing Y1 - 2024 U6 - https://doi.org/10.58286/30254 SN - 1435-4934 VL - 29 IS - 10 PB - NDT.net ER - TY - CHAP A1 - Haug, Sonja ED - Endreß, Martin ED - Rampp, Benjamin T1 - Soziales Kapital T2 - Politische Soziologie Y1 - 2025 SN - 978-3-8487-4836-5 PB - Nomos CY - Baden-Baden ER - TY - GEN A1 - Scheppach, Markus W. A1 - Weber Nunes, Danilo A1 - Rauber, David A1 - Arizi, X. A1 - Probst, Andreas A1 - Nagl, Sandra A1 - Römmele, Christoph A1 - Ebigbo, Alanna A1 - Palm, Christoph A1 - Messmann, Helmut T1 - Künstliche Intelligenz-basierte Erkennung von interventionellen Phasen bei der endoskopischen Submukosadissektion T2 - Zeitschrift für Gastroenterologie N2 - Einleitung: Die endoskopische Submukosadissektion (ESD) ist ein komplexes endoskopisches Verfahren, das technische Expertise erfordert. Objektive Methoden zur Analyse von interventionellen Abläufen bei ESD könnten für Qualitätssicherung und Ausbildung, wie auch eine automatische Befunderstellung von Nutzen sein. Ziele: In dieser Studie wurde ein KI-Algorithmus für die Erkennung und Klassifizierung der interventionellen Phasen der ESD entwickelt, um die technische Basis für eine standardisierte Leistungsbewertung und automatische Befunderstellung zu schaffen. Methodik: Vollständige ESD-Videoaufnahmen von 49 Patienten wurden retrospektiv zusammengestellt. Der Datensatz umfasste 6.390.151 Einzelbilder, die alle für die folgenden interventionellen Phasen annotiert wurden: Diagnostik, Markierung, Injektion, Dissektion und Hämostase. 3.973.712 Bilder (28 Patienten) wurden für das Training eines Video-Swin-Transformers genutzt. Dabei wurde temporale Information durch standardisierte BIldextraktion in festgelegten zeitlichen Abständen zum analysierten Bild inkorporiert. 2.416.439 separate Bilder (21 Patienten) wurden für eine interne Validierung genutzt. Ergebnis: Bei der internen Evaluation erreichte das System insgesamt einen F1-Wert von 0,88. Es wurden F1-Werte von 0,99, 0,89, 0,89, 0,91 und 0,52 für Diagnostik, Markierung, Injektion, Dissektion bzw. Blutungsmanagement gemessen. Die Sensitivitäten für dieselben Parameter betrugen 1,00, 0,80, 0,94, 0,89 und 0,67, die Spezifitäten lagen bei 1,00, 1,00, 0,98, 0,88 und 0,93. Positive prädiktive Werte wurden mit 0,98, 1,00, 0,85, 0,94 und 0,43 gemessen. Schlussfolgerung: In dieser vorläufigen Studie zeigte ein KI-Algorithmus eine hohe Leistungsfähigkeit für die Einzelbild-Erkennung von Verfahrensphasen während der ESD. Die vergleichsweise niedrige Leistung für die Blutungsphase wurde auf das seltene Auftreten von Blutungsepisoden im Trainingsdatensatz zurückgeführt, der zu diesem Zeitpunkt nur Videos in voller Länge umfasste. Die zukünftige Entwicklung des Algorithmus wird sich auf die Reduzierung von Klassenungleichgewichten durch selektive Annotationsprotokolle konzentrieren. Y1 - 2025 U6 - https://doi.org/10.1055/s-0045-1811093 VL - 63 IS - 08 SP - e612 EP - e613 PB - Thieme CY - Stuttgart ER - TY - CHAP A1 - Haug, Sonja A1 - Milewski, Nadja ED - Rolfes, Vasilija ED - Scharf, Anna ED - Gerhards, Helene ED - Cerullo, Laura ED - Weber, Karsten T1 - Soziostrukturelle und -kulturelle Einflussfaktoren auf Einstellungsmuster zu assistierter Reproduktion T2 - Reproduktionszukünfte : ethische, rechtliche und soziale Perspektiven neuer Reproduktionstechniken N2 - Zu den bereits klinisch implementierten reproduktionsmedizinischen Verfahren wie der In-vitro-Fertilisation oder Eizell-Kryokonservierung, die Menschen mit Fertilitätseinschränkungen dabei helfen sollen, Kinder zu bekommen, kommen immer mehr Verfahren hinzu, welche sich zwar noch im experimentellen Stadium befinden, jedoch bereits auf die Möglichkeit der klinischen Anwendung hindeuten. Ein erstes relevantes Verfahren ist die In-vitro-Gametogenese, die Generierung von artifiziellen Gameten. Ein zweites ist die extrakorporale Schwangerschaft, mit der die Hoffnung verbunden ist, schwere Komplikationen oder sogar den Tod bei Frühgeburten zu vermeiden. Diese medizinischen Innovationen können weitreichende rechtliche, gesellschaftliche und ethische Konsequenzen im Kontext der menschlichen Reproduktion nach sich ziehen – diese werden im vorliegenden Sammelband kritisch diskutiert. Y1 - 2025 SN - 978-3-658-46299-4 U6 - https://doi.org/10.1007/978-3-658-46300-7 SP - 47 EP - 74 PB - Springer CY - Wiesbaden ER - TY - JOUR A1 - Nickel, Maren T. A1 - Lauer, Norina A1 - Kurfess, Christina A1 - Kreiter, Daniel A1 - Corsten, Sabine T1 - Peer-to-peer support in Aphasia: the participants’ perspective on the digital network PeerPAL JF - Qualitative Research in Communication Differences and Disorders N2 - Background: Aphasia can affect health-related quality of life (HRQL), identity, and social participation. Peer contact can have a positive impact on all three aspects. However, there are barriers to the available offers (e.g., professional guidance), whereas a digital solution enables autonomous peer contact. Therefore, we developed and evaluated a customized application for autonomous, asynchronous peer contact that encourages social activities and interaction. The qualitative evaluation in this study includes evaluation of the application and psychosocial changes during the intervention. Quantitative data are published elsewhere. Method: We conducted interviews with 11 people with aphasia who had participated in our pre–post mixed-methods study. The interviews were analyzed using thematic analysis guided by a codebook. Results: Responses were categorized into use and evaluation of the application (three themes) and psychosocial changes during the intervention (four themes). Most interviewees reported that they would like to use the application in the future. The benefits of peer contact, digital exchange, and, thereby, social activities were positively highlighted. Moreover, there are indications of improvements in HRQL and a change in identity. Negative aspects included a lack of feedback from other participants, too few peers in the geographical area, and missing features and bugs in the application. Discussion/Conclusions: The application is suitable for establishing peer contact, which can lead to psychosocial improvements. It remains to be analyzed who benefits most from the application and at what phase of aphasia. Time since onset, social environment, and previous peer contact should be considered. In the future, a larger sample should be analyzed. KW - Aphasie KW - Inklusion KW - Digitalisierung KW - Lebensqualität KW - Teilhabe KW - Peer Support KW - Social Network Y1 - 2025 UR - https://utppublishing.com/doi/abs/10.3138/qrcdd-2024-0009 VL - 16 IS - 1 SP - 43 EP - 81 PB - University of Toronto Press ER - TY - CHAP A1 - Stocker, Philipp A1 - Lehrer, Tobias A1 - Duddeck, Fabian A1 - Wagner, Marcus T1 - Face-wise prediction of sheet-metal drawability using graph neural networks T2 - Journal of Physics: Conference Series N2 - The early design phase of deep-drawn structural components involves time-consuming iterative development. Traditional drawability assessments rely on finite element simulations, which are computationally expensive and slow the design process. Alternative machine learning (ML) approaches show promise in accelerating this process but face challenges with existing methods. Existing low-dimensional ML models only provide global predictions without identifying specific geometric regions prone to failure. High-dimensional models provide local predictions but require significant amounts of training data. We propose a data-driven approach leveraging graph neural networks (GNNs) for face-wise drawability prediction of sheet metal components in their computer-aided design (CAD) representation. Our method aims to bridge the gap between the computational efficiency of ML and the spatial resolution of simulation by providing face-wise insight into potential failure regions. This study utilises a dataset of parametric U-channel geometries with variability in both geometry and topology. Ground-truth labels are generated using inverse analysis simulations. Geometric entities are represented through the use of UV parameterisations, whereby 3D surfaces are mapped into 2D space to facilitate geometric encoding. Concurrently, the topological relationships are captured using a face adjacency graph. To address data scarcity, we evaluate how different amounts of training data affect model performance and perform ablation studies to analyse the impact of different CAD representation features. Our results show that the proposed approach achieves high accuracy even with limited training data. In addition, the ablation studies provide insights into the most critical CAD features, guiding future research. These results highlight the potential of our GNN to predict face-wise drawability in the early design phase. Y1 - 2025 U6 - https://doi.org/10.1088/1742-6596/3104/1/012053 SN - 1742-6588 N1 - Corresponding author der OTH Regensburg: Philipp Stocker VL - 3104 IS - 1 PB - IOP Publishing ER - TY - THES A1 - Schaffer, Josefa T1 - Precision in eye tracking: evaluation and improvement of accuracy N2 - This thesis will evaluate the accuracy of the Tobii Pro Glasses 3, which are wearable eye tracking glasses. A static and dynamic accuracy study will be conducted, utilising a poster and imitating realistic environments. The results will be evaluated using a self-developed sample-wise approach, trying to determine possible differences between static and dynamic conditions while wearing eye tracking glasses. In addition to that, a tool named glassesValidator, used to calculate data quality metrics of eye tracking glasses, will be evaluated on its accuracy and validity itself. In the static accuracy study, participants will focus, in reading order, on nine fixation targets on the poster for at least two seconds while using a chin rest to prevent head movement. In the dynamic accuracy study participants will be walking in a semicircular movement around the poster while focusing only on the central fixation target on the poster. The results for the static and dynamic study will be compared to each other, providing possible influence of different lighting conditions and the usage of contact lenses. The results provided by glassesValidator and the self-developed accuracy approach will also be compared to each other to evaluate and provide possible improvements to increase the accuracy of the tool. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85296 CY - Regensburg ER - TY - CHAP A1 - Schwägerl, Felix A1 - Buchmann, Thomas A1 - Westfechtel, Bernhard T1 - Multi-variant model transformations - a problem statement T2 - Proceedings of the 11th International Conference on Evaluation of Novel Software Approaches to Software Engineering N2 - Model Transformations are a key element of Model-Driven Software Engineering. As soon as variability is involved, transformations become increasingly complicated. The lack of support for variability in model transformations impairs the acceptance of approaches to organized reuse such as software product lines. In this position paper, the general problem of multi-variant model transformations is formulated for MOF-based, XMI-serialized models. A simplistic case study is presented to specify the input and the expected output of such a transformation. Furthermore, requirements for tool support are defined, including a standardized representation of both multi-variant model instances and variability information, as well as an execution specification for multi-variant transformations. A literature review reveals that the problem is weakly identified and often solved using ad-hoc solutions; there exists no tool providing a general solution to the proposed problem statement. The observation s presented here may serve for the future development of standards and tools. KW - Model-Driven Software Engineering KW - Software Product Lines KW - Model Transformations KW - Code Generation Y1 - 2016 SN - 978-989-758-189-2 U6 - https://doi.org/10.5220/0005878702030209 SN - 2184-4895 SP - 203 EP - 209 PB - SCITEPRESS ER - TY - JOUR A1 - Diachkova, Yana A1 - Nikolaeva, Sofiya A1 - Guertler, Katherine T1 - Communication in International Humanitarian Relief: Profiling Ukrainian Boundary Spanners JF - Journal of Intercultural Communication N2 - Boundary spanning—the actions and roles individuals or organizations undertake to bridge differences and facilitate communication, collaboration, and understanding across diverse cultural, organizational, or geographical divisions—is an essential element of international cooperation. Set against the backdrop of the Russia-Ukraine war, The purpose of this study is to explore the type of boundary spanning in this uncertain context, the linguistic characteristics of boundary spanners, the necessary skills and competencies required to navigate the complex socio-political landscape, and the role of boundary spanners in humanitarian assistance. This study employs a qualitative research approach, using semi-structured interviews with informants actively engaged in relief efforts and cross-cultural collaboration. The findings emphasized the significance of English as the primary language of communication, the importance of cultural sensitivity and awareness, and the need for intercultural competence in effective boundary spanning. The study concludes with insights from the ongoing Ukrainian experience of bridging geodemographic boundaries and the role of boundary spanners in this process, highlighting key aspects of boundary spanning. Overall, the study contributes to the theoretical background of boundary spanning and enhances the understanding of how linguistic and cultural boundary spanning can drive positive change and improve outcomes in humanitarian aid. The implications of this study suggest that underscore the critical need for collaboration with experienced boundary spanners in educational settings. Y1 - 2025 U6 - https://doi.org/10.36923/jicc.v25i1.1019 SN - 1404-1634 N1 - Corresponding author der Partnerhochschule aus Kiew: Yana Diachkova VL - 25 IS - 1 SP - 98 EP - 106 PB - ICR Publications ER - TY - RPRT A1 - Alex, Karla A1 - Eichinger, Johanna A1 - Heyder, Clemens A1 - Kandlbinder, Agnes A1 - Loder, Sandra A1 - Rolfes, Vasilija A1 - Röttger, Sara A1 - Scharf, Anna A1 - Scorna, Ulrike A1 - Weigold, Stefanie ED - Cerullo, Laura ED - Gerhards, Helene ED - Weber, Karsten T1 - Abstractband I: In-vitro-Gametogenese (IVG) und artifizieller Uterus (AU) – Problemauslöser oder Problemlöser? Ethische, soziale und rechtliche Aspekte zukünftiger reproduktionsmedizinischer Verfahren BT - Klausurwoche für Early Career Researchers (19. September bis 23. September 2022, OTH Regensburg) Y1 - 2022 U6 - https://doi.org/10.13140/RG.2.2.30303.53928 N1 - Die Klausurwoche wird vom Bundesministerium für Bildung und Forschung (BMBF) (Förderkennzeichen: 01GP2185, Projektkürzel: IVG-AU-PP) finanziell gefördert. ER - TY - JOUR A1 - Neubauer, Katrin A1 - Fischer, Sebastian A1 - Hackenberg, Rudolf T1 - Security risk analysis of the cloud infrastructure of Smart Grid and IoT - 4-Level-Trust-Model as a security solution JF - International Journal on Advances in Internet Technology N2 - The digital transformation has found its way into business and private life. It consists of digitization and digitaliza- tion. Digitization means the technical process and digitalization is the socio-technological process. Technologies of digitization are Cloud Computing (CC), Internet of Things (IoT) and Smart Grid (SG), which are separate technologies. The increasing digitalization in the private sector and of the energy industry connect these technologies. Actually, there is no connection between the CC infrastructure and the SG infrastructure at the moment, because in Germany the SG is currently under construction. If one looks at the CC and IoT, it must be stated there is an connection between the IoT infrastructure and the CC infrastructure as a service provider. To connect the technologies CC, IoT and SG and also build an SG cloud for innovative services, the new laws for privacy must be implemented. For privacy and security analyses it is important to know which data can be stored and distributed on a cloud. To illustrate this analysis, we connect the SG infrastructure with the IoT. An IoT device (car charging station) should be able to transfer data to and from the SG. SG is a critical infrastructure and the IoT device a potential insecure device and network. We show the communication between the smart meter switching box and the IoT device and the data transferred between their clouds. The charging station is connected to the SG to get the current amount of renewable energy in the grid. This is necessary to create a new smart service. But this service also generates private data (e.g., name, address, payment details). The private data should not be transferred to the IoT cloud. For the connection of SG and IoT, availability, confidentiality and integrity must be ensured. A risk analysis over all the cloud connections, including the vulnerability and the ability of an attacker, the resulting risk and the 4-Level- Trust-Model for security assessment are developed. Furthermore, we show the application of the 4-Level-Trust-Model in this paper. Y1 - 2020 UR - https://www.researchgate.net/publication/346580224_Security_Risk_Analysis_of_the_Cloud_Infrastructure_of_Smart_Grid_and_IoT_-_4-Level-Trust-Model_as_a_Security_Solution UR - https://www.iariajournals.org/internet_technology/inttech_v13_n12_2020_paged.pdf VL - 13 IS - 1&2 SP - 11 EP - 20 ER - TY - JOUR A1 - Broll, Alexander A1 - Hahnel, Sebastian A1 - Goldhacker, Markus A1 - Rossel, Jakob A1 - Schmidt, Michael A1 - Rosentritt, Martin T1 - Influence of digital crown design software on morphology, occlusal characteristics, fracture force and marginal fit JF - Dental Materials N2 - Objectives The study evaluated the influence of digital design software on crown morphology, occlusal characteristics, fracture force, and marginal fit across varying preparation designs for an identical target tooth. Methods A resin-based tooth (tooth 36) was digitized, manufactured ( ), individually prepared and re-digitized. Five design groups were established using conventional software proposals, technician designs, two AI-based software solutions, and natural tooth-based reference designs. All systems employed consistent parameters. Crown designs were digitally assessed using quantitative morphological and occlusal metrics in reference to the original tooth. Crowns were milled, marginal fit was measured via digital microscopy, and fracture resistance was determined after thermal cycling and mechanical loading. Results Morphological metrics revealed statistically significant deviations across groups, with the technician design achieving the best performance. Occlusal metrics showed high deviations in the positional accuracy of the contact points across all groups. Technician and AI-based designs exhibited comparable functional results. None of the design groups were able to achieve contact with all relevant antagonist teeth, due to high deviations in the mesiolingual cusp. Conventional software designs exhibited the lowest fracture forces. Significant improvements were achieved through technician intervention. Vertical marginal discrepancies remained comparable across groups. Significance Improved functional and morphological design combined with high fracture resistance can reduce the need for clinical adjustments, minimize wear, and enhance crown longevity. Digital design software significantly influences crown morphology, occlusal characteristics and fracture forces. Vertical marginal discrepancies remain similar. AI-driven approaches demonstrate comparability with technician designs in terms of fracture forces, functional performance, and marginal fit. KW - Dental prosthesis design KW - Digital Dentistry KW - Crown design software KW - Preparation design Y1 - 2025 U6 - https://doi.org/10.1016/j.dental.2025.09.003 SN - 0109-5641 PB - Elsevier ER - TY - CHAP A1 - Bauer, Patrick A1 - Frikel, Jürgen T1 - BPConvNet: a deep learning based ρ-Filtered layergram reconstruction method for computed tomography T2 - AIP Conference Proceedings N2 - In this article, we address the reconstruction problem in computed tomography (CT) when dealing with sparse view data. Traditional approaches like filtered backprojection (FBP) often fail under these conditions, leading to streaking artifacts. We propose BPConvNet, a deep learning based version of the ρ-filtered layergram or backprojection filtration (BPF) technique (cf. [1]). Unlike FBP, the BPF method applies filtering (F) after backprojection (BP), hence the name. The proposed BPConvNet adapts the BPF workflow by substituting the filtering step with a residual convolutional neural network. Our numerical experiments demonstrate that BPConvNet is competitive to similar deep learning methods. Moreover, we explain that BPConvNet can be easily adapted to to different CT acquisition geometries, such as fan beam and 3D configurations KW - Convolutional neural network KW - Deep learning KW - Learning and learning models KW - Computed tomography Y1 - 2025 U6 - https://doi.org/10.1063/5.0286063 SN - 0094-243X VL - 3315 IS - 1 PB - AIP Publishing ER - TY - JOUR A1 - Wagner, Marcus A1 - Franke, Markus A1 - Krause, Tom Janis A1 - Heinle, Ingo T1 - Data augmentation of material properties for machine learning in industrial production - a case study in an automotive press shop JF - Engineering Computations : International journal for computer-aided engineering and software N2 - In the context of industrial production, the utilisation of data recording and processing techniques is becoming increasingly prevalent across the manufacturing sector. The solutions integrate sensors, facilitate the transmission of data, and enable data-driven decision-making, thereby reducing downtime and optimising quality. However, challenges emerge due to the limited non-transferable data or models between processes. Alterations to the production process can render collected data invalid, resulting in restricted datasets and potential overfitting. To address these issues, techniques such as data augmentation are employed. This study aims to develop a data augmentation methodology applicable in dynamic, data-scarce production environments, enhancing the robustness of regressor predictions. KW - Data augmentation KW - Machine learning KW - Manufacturing KW - Deep drawing Y1 - 2025 U6 - https://doi.org/10.1108/EC-08-2024-0787 PB - Emerald Publishing CY - Leeds ER - TY - JOUR A1 - Eiler, Julian A1 - Weber, Stefan A1 - Gerlesberger, Peter A1 - Plöchinger, Heinz A1 - Schreiner, Rupert T1 - Active heat-loss compensated miniaturized pirani sensor chip JF - IEEE Sensors Letters N2 - Due to the limited measuring range of commercial Pirani sensors in lower pressure regimes, attempts are being made to extend the measuring range of the sensors. Our approach to extend the measuring range toward lower pressures is a micro-electromechanical systems (MEMS) Pirani sensor with active heat compensation on the suspensions. The sensor element has the shape of a microhotplate and consists of a nickel heating meander embedded in two silicon nitride layers. The whole structure is built on a silicon wafer. The sensor element is suspended on all four corners of the substrate. On each of the suspensions, there is an additional heating structure that minimizes the heat flux from the hot sensor element toward the substrate. The sensor is driven at a constant temperature through a self-balancing Wheatstone bridge. A constant voltage is applied to the heating structures on the suspensions. It has been demonstrated that with these additional heaters, the sensitivity of the sensor can be increased in the high-vacuum regime. This enables reliable vacuum measurements down to 10−6 mbar. KW - Temperature measurement KW - Heating systems KW - Temperature sensors KW - Sensitivity KW - Pressure measurement KW - Voltage measurement KW - Heat sinks KW - Semiconductor device measurement KW - Noise measurement KW - Bridge circuits Y1 - 2025 U6 - https://doi.org/10.1109/LSENS.2025.3605747 SN - 2475-1472 VL - 9 IS - 10 PB - Institute of Electrical and Electronics Engineers (IEEE) ER - TY - CHAP A1 - Shahab, Muhammad A1 - Ullah, Abdul Wahab Usman A1 - Shehzad, Muhammad A1 - Shah, Syed Bilal A1 - Joyo, M. Kamran A1 - Khan, Sheroz T1 - Optimal distributed generation placement in radial distribution system using particle swarm optimization T2 - 2024 IEEE 9th International Conference on Engineering Technologies and Applied Sciences (ICETAS) N2 - This paper addresses losses of power in Radial Distribution Systems (RDS), which significantly affect voltage levels and operational costs. The main aim is to optimize the positioning and size of Distributed Generation (DG) units, including Photovoltaic (PV) cells, and Wind Turbines (WT), to analyze the effect of DG placement in reducing the losses in power and enhancing the voltage profiles in radial distribution system (IEEE 33 bus system). This research employs Particle Swarm Optimization (PSO), a robust algorithm well-suited for tackling non-linear optimization issues in order to identify the appropriate placement and size for DG units. A number of scenarios with varying numbers of DG units are simulated, indicating significant reductions in active as well as reactive power losses. Likewise, the consistency and reliability requirements of modern distribution systems are improved as the voltage profile is improved. The key findings demonstrate that optimal DG integration enhances system efficiency, contributes to operational cost savings, and improves grid stability. PSO was chosen for its ability to effectively balance computational effort while achieving high accuracy in minimizing the losses associated with power and enhancing voltage profiles. In contrast to traditional optimization techniques, PSO offers superior accuracy and efficiency in addressing the challenges of non-linear optimization in RDS. KW - Radial Distribution System (RDS) KW - Distributed Generation (DG) KW - Particle Swarm Optimization (PSO) KW - Voltage Profile KW - Power Losses Y1 - 2024 U6 - https://doi.org/10.1109/ICETAS62372.2024.11120307 PB - IEEE ER - TY - JOUR A1 - Heberl, Michael A1 - Hofrichter, Andreas A1 - Rank, Daniel A1 - Bauer, Franz A1 - Sterner, Michael T1 - Influence of plant dimensioning and location on the ecology of PEM electrolysis JF - International Journal of Hydrogen Energy N2 - PV and wind systems with PEM electrolysis offer great potential for producing hydrogen with low emissions. Our research has identified the ecologically optimal size of PEM in relation to fixed PV/wind capacities. We calculate efficiencies and production volumes for PEM with 240 capacity and site variations. We analyse the global warming potential of all systems and draw conclusions about the optimal system design. The lowest GWP is achieved at the site with the highest full load hours with 1.32 kg CO2-eq/kg H2 (Wind, 28 MW electrolysis) and 4.24 kg CO2-eq/kg H2 (PV, 23 MW electrolysis). We have identified a clear trend: increasing PV/wind full load hours leads to higher ideal PEM capacities. However, there is a significant discrepancy between the ideal economic and ecological capacity. Furthermore, higher electrolysis capacities can achieve lower emissions as they increasingly operate at a more efficient partial load. KW - Electrolysis KW - Life cycle analysis KW - Global warming potential KW - Plant design KW - Renewable energy Y1 - 2025 U6 - https://doi.org/10.1016/j.ijhydene.2025.151039 SN - 0360-3199 VL - 167 PB - Elsevier ER - TY - JOUR A1 - Schildgen, Johannes T1 - Individuelle Data-Warehousing-Projekte anstelle einer Abschlussklausur JF - Datenbank-Spektrum N2 - Dieser Artikel berichtet über die Erfahrungen aus zwei Semestern, in denen Studierende der Data-Warehousing-Vorlesung individuelle Einzelprojekte bearbeitet haben. Das Projekt besteht aus fünf Challenges: die Vorstellung der Projektidee, ein Peer-Review anderer Ideen, Datenmodellierung, ETL und analytische Queries, sowie die Erstellung eines Power BI-Dashboards. KW - Data Analytics KW - Data Engineering KW - Data Mining KW - Experiential Education KW - Methodology of Data Collection and Processing KW - Project Management Y1 - 2025 U6 - https://doi.org/10.1007/s13222-025-00502-y SN - 1618-2162 PB - Springer ER - TY - CHAP A1 - Fuhrmann, Thomas A1 - Niemetz, Michael T1 - Fostering democratic attitude within engineering education T2 - 11th International Conference on Higher Education Advances (HEAd’25) N2 - According to the education ideal advocated by Wilhelm von Humboldt, education should be a holistic process to develop the whole human being and should not be narrowed toward job training. For example, in democratic societies, education should be directed to fostering a democratic mindset of students to strengthen pluralistic democracy. It is always possible to introduce a general course into a study program that deals with democratic education from a theoretical point of view. But by introducing such a course, the time spent on technical subjects will be reduced. The other major disadvantage of such solutions is that democratic education is seen to be separated from technical education. But in the contrary, democracy should be included in the whole life as a general way of thinking and cooperation between individuals. Therefore, ideas and lecture experiences are presented in this article on how democratic education can be integrated into all engineering subjects as an elementary educational design concept. Students should be led toward a general democratic attitude by practical application. To achieve this, democratic learning environments can be established in all types of courses like lectures, seminars, and labs. This includes, for example, the design of exercises, the presentation of the theoretical content, and the interaction between professors and students as well as the interaction between the students themselves as induced by the teaching activities. Also in exams, elements to promote democratic thinking are possible: Exams should be not directed to learning only content but toward understanding, creativity, and problem-solving competence. They should include, where possible, the fact that correct technical solutions are not unique but that a multiverse of solutions exists, with each solution featuring various strengths and weaknesses. This not only sensitizes the students for the need for (e.g. socially or environmentally) responsible technical design choices but also allows them to find optimized solutions for the engineering challenges at hand. In sum, lecturers should be aware that a democratic learning environment is a demanding process, as students must be taken as serious partners in a joint learning process and surprises are to be expected. KW - Engineering Education KW - Democratic Education Y1 - 2025 U6 - https://doi.org/10.4995/HEAd25.2025.20093 SP - 879 EP - 886 PB - Editorial Universitat Politècnica de València (edUPV) CY - Valencia ER - TY - CHAP A1 - Bartl, Mathias A1 - Hausladen, Matthias A1 - Asgharzade, Ali A1 - Buchner, Philipp A1 - Krysztof, Michal A1 - Knápek, Alexandr A1 - Bachmann, Michael A1 - Schreiner, Rupert T1 - Experimental method for investigation of the emission pattern characteristics of individual field emission tips using a CMOS image sensor T2 - 38th International Vacuum Nanoelectronics Conference (IVNC) N2 - The emission pattern characteristics of individual silicon field emission tips were investigated using a CMOS image sensor. The quality of the image was improved by spatial and temporal averaging, so that individual emission centers could be identified and their temporal changes investigated. By mapping the emission current onto the image, the distribution of the current density on the image sensor could be calculated. KW - CMOS image sensors KW - Silicon KW - Current density KW - Nanoelectronics Y1 - 2025 U6 - https://doi.org/10.1109/IVNC65669.2025.11121040 PB - IEEE ER - TY - GEN A1 - Fischer, Sebastian T1 - The persistent problems with cybersecurity : a negative example and an outlook on the Cyber Resilience Act Y1 - 2025 UR - https://www.iaria.org/conferences2025/filesDataSys25/Keynote_SebastianFischer_ThePersistentProblem.pdf PB - IARIA ER - TY - GEN A1 - Hauser, Dominic A1 - Graf, Julian A1 - Fischer, Sebastian T1 - SEPP – Security Education and Penetration-Testing Platform for IoT T2 - Conference programme & abstract book N2 - The Internet of Things (IoT) is becoming a major part of our everyday lives, offering convenience and smarter solutions, but also bringing significant security challenges. While theoretical knowledge in IoT security is essential, studies have shown that practical content can be an essential part of internalizing understanding. To address this, we developed the Security Education and Penetration-Testing Platform (SEPP) as the practical component of an existing IoT security course at the OTH Regensburg. SEPP uses real IoT devices like smart locks, cameras, and plugs, simulating a smart home environment to make learning interactive and engaging. Students can explore vulnerabilities, conduct penetration tests, and document their findings through structured exercises. By working on tasks like network scanning, analyzing data traffic, and simulating attacks, students gain a deeper understanding of IoT security risks. Initial tests show that this approach helps students apply their theoretical knowledge and significantly improve their practical skills. This paper explains how SEPP was built, the exercises it offers, and why it’s an important step forward in teaching IoT security effectively. Furthermore, we aim to share the findings and tasks from this paper with other universities, providing them with a solid foundation to teach practical IoT security knowledge in their own courses. Y1 - 2025 UR - https://iafor.org/archives/conference-programmes/ece/ece-programme-2025.pdf SN - 2433-7544 SP - 101 PB - IAFOR ER - TY - CHAP A1 - Graf, Julian A1 - Hachani, Murad A1 - Fischer, Sebastian A1 - Hackenberg, Rudolf T1 - A heuristic packet processing model for improved encrypted network analysis T2 - CSCS '25: Proceedings of the 2nd Cyber Security in CarS Workshop N2 - Modern networked systems, such as those in the automotive sector, face increasing complexity and growing attack surfaces due to the rise of interconnected and data-driven technologies. Detecting malicious behavior in these environments requires efficient and scalable methods that can operate reliably despite limited resources and high communication volumes. This paper proposes a heuristic packet processing model designed to support intrusion detection based on structural and temporal characteristics of encrypted network traffic. The model follows a modular architecture consisting of four key phases: recording, sorting, prioritizing, and analyzing. At the core of the approach is the Polymetric Queueing Topology Space, a feature space that combines statistical and time series attributes derived from model structure and flow data. These features serve as input for machine learning models, which can effectively distinguish between benign and intrusion traffic patterns without relying on packet data beyond the transport layer. The approach was evaluated using the publicly available ToN_IoT dataset and demonstrated that reliable classification is achievable using a subset of the developed feature space that contains model-derived traffic features. We used Random Forest for supervised binary and multi-class classification achieving high accuracy scores of 99% for binary and 98% for multi-class classification. Additionally, for unsupervised anomaly detection, we created an Isolation Forest model accomplishing F1-scores of 0.92 for the benign and 0.96 for intrusion class. The architecture is designed to enable dynamic traffic prioritization and to offer a flexible foundation that can observe diverse network domains while maintaining efficient performance under constrained computational conditions. Y1 - 2025 U6 - https://doi.org/10.1145/3736130.3764510 PB - ACM CY - New York, USA ER -