TY - CHAP A1 - Vitzthum, Thorsten A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Can Aggregate Production Planning (APP) be modified to be as good as Master Production Scheduling (MPS) T2 - ACC Journal N2 - In diesem Beitrag wird anhand einer Fallstudie die Bedeutung der Hauptproduktionsprogrammplanung (HPPLAN) für die hierarchische Produktionsplanung herausgearbeitet werden. Dazu wird versucht das Ergebnis der aggregierten Gesamtplanung (AGGRPLAN) durch Veränderung einzelner Paramater so zu verbessern, dass es dem Ergebnis der HPPLAN entspricht. Im Rahmen der Untersuchungen konnten dabei Verbesserungen für einzelne Planungssituationen erzielt werden, eine generelle Lösung konnte jedoch nicht gefunden werden. Insbesondere der Einsatz eines geeigneten Kapazitätsreduktionsfaktors in Verbindung mit der Berücksichtigung der Durchlaufzeit führt zu einer Verbesserung der Lösung. Bei der Planung von mehr als einem Produkt ist allerdings schwierig einen geeigneten Kapazitätsreduktionsfaktor zu finden, da dieser abhängig von der Nachfrage ist. KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung KW - Fallstudie KW - Hierarchical production planning KW - Aggregate production planning (APP) KW - Master production scheduling (MPS) KW - Material requirement planning KW - Resource profiles Y1 - 2017 U6 - https://doi.org/10.15240/tul/004/2017-2-012 VL - 23 IS - 2 SP - 155 EP - 162 ER - TY - JOUR A1 - Schütz, Michael Maximilian A1 - Herrmann, Frank T1 - Aufbau eines Konzeptes zur Erkennung von unterschiedlichen Leistungen von verschiedenen Teilnehmern im Auslieferprozess durch die Analyse des Reklamationsverhaltens JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Im vorliegenden Artikel wird ein Konzept zur Erkennung von Problematiken vorgestellt, welches bei einem führenden Automobilproduzenten umgesetzt wurde. Mit Hilfe dieses Konzeptes, werden Auffälligkeiten anhand der Reklamationsquote bei Standorten, Touren, Händlern und Materialnummern aufgedeckt. Das übergeordnete Ziel, das mit einer effizienten Ursachenanalyse erreicht werden soll, besteht in der langfristigen Senkung der Reklamationsquote. Basis dieses Konzeptes bilden dabei die Reklamationen der einzelnen Händler. Anhand von statistischen Methoden wird eine Grundlage geschaffen, um die Ursachen und Auffälligkeiten der jeweiligen Akteure zu ermitteln. Dabei wird auch die Struktur der Auslieferung näher betrachtet, um Standorte, Touren und Händler zu identifizieren, die bei gleichen Auslieferbedingungen unterschiedliche Werte aufweisen.In den folgenden Ausführungen wird eine Methodik erläutert, die eine Abbildung der „normalen“ Reklamationsquote ermöglicht und gleichzeitig Fahrgebiete, Touren und Händler kennzeichnet, die von dieser Reklamationsquote „auffällig“ abweichen. Des Weiteren wird ein Konzept vorgestellt, welches Materialnummern, die plötzlich häufig reklamiert werden und in diesem Sinn auffällig sind, identifizieren kann. Bei dem Automobilproduzenten wurde durch beide aufgezeigt, wo die Ursachenanalyse am effektivsten anzusetzen ist, um damit eine konstante Senkung der Reklamationsquote und eine Steigerung der Kundenzufriedenheit zu erreichen. KW - Reklamation KW - Distribution KW - Statistik KW - Reklamationsmanagement KW - Distributionsstruktur KW - Ausreißer-Erkennung KW - Analyse-Tool Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1935 IS - 5 SP - 24 EP - 31 PB - AKWI ER - TY - JOUR A1 - Tran, Phong A1 - Herrmann, Frank T1 - Teilautomatisierung der Testspezifikation einer Blasmaschine der Krones AG JF - Anwendungen und Konzepte der Wirtschaftsinformatik (AKWI) N2 - In der Krones AG werden alle Blasmaschinen eines neuen Kundenauftrags ¬ sowohl als Teil einer Komplettanalage als auch einzeln – Vortests unterzogen, um sicherzustellen, dass die Maschine die kundenspezifischen Anforderungen an die speziellen Konfigurationen der Flaschenform erfüllt. Diese Prüfungen erfordern Testmaterialien, bei denen es sich im Fall der Blasmaschinen um Behälter ¬– auch Preforms genannt – handelt, die als Ausgangsprodukt für die Herstellung der eigentlichen Flaschen verwendet werden. Aus diesem Grund müssen mit jedem neuen Kundenauftrag, der eine Blasmaschine beinhaltet, Testmaterialien in ausreichender Anzahl angefordert werden. Diese werden firmenintern produziert und müssen je nach Maschinenkonfiguration in der benötigten Anzahl bereitgestellt werden, um ausführliche Tests durchzuführen. Die Bestellungen erfolgen bisher stets mittels Formulare in Form von Word-Dokumenten, auch Flaschenanforderungen genannt, die manuell vom Vertrieb ausgefüllt werden. Dieser Vorgang erfordert viel Zeit und Ressourcen und soll aus diesem Grund automatisierter ablaufen. Ziel dieses Projekts ist eine Konzeption und Umsetzung einer neuen Funktion, die den alten Prozess ablöst und durch eine effizientere Lösung ersetzt. Hierbei soll zunächst die Funktionalität als eigenständiges Programm entwickelt werden. Benötigt wird eine Konzeption und Implementierung einer geeigneten graphischen Oberfläche sowie ein Programm, das automatisch die benötigten Daten zusammenfasst und diese in übersichtlicher Form darstellt. KW - Produkttest KW - Spezifikation KW - Anlagenbau KW - Digitalisierung KW - Prozessverbesserung KW - SAP-Transaktion Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1923 IS - 5 SP - 13 EP - 23 PB - AKWI ER - TY - JOUR A1 - Muck, Christina A1 - Dietz, Fabian A1 - Herrmann, Frank T1 - Vereinheitlichung materialkennzeichnender Etiketten am Beispiel der Krones AG JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Krones AG verwendet zur Materialidentifikation Haftetiketten, die die produktbezogenen Informationen beinhalten. Aufgrund eines fehlenden Unternehmensstandards in Bezug auf die Gestaltung des Etikettenlayouts soll im Zuge eines Projektes die Vereinheitlichung der Materialetiketten thematisiert werden. Neben der Gestaltung eines einheitlichen Layouts erfolgt die Festlegung der Form der Informationen. Durch maschinenlesbare Abbildung der Informationen wird die automatische systemseitige Informationsverarbeitung möglich. Dies führt einerseits zu kürzeren Prozesszeiten, da der Eingabeaufwand entfällt. Gleichzeitig garantiert man so die fehlerfreie Datenübertragung, da manuelle Eingabefehler verhindert werden. Im Rahmen dieser Ausarbeitung wird aufgezeigt, welche Vorgaben und Richtlinien bezüglich einer Standardisierung existieren und wie diese am Beispiel der Krones AG umgesetzt werden. Nach umfassender Aufnahme und Analyse des derzeitigen Ist-Zustandes folgen Festlegungen für die zukünftige Struktur. Somit wird die Basis für die systemseitige Implementierung des Änderungsvorhabens geschaffen. Weiter werden alternative Möglichkeiten zur Warenidentifikation und -nachverfolgbarkeit aufgezeigt und erläutert, welche Herausforderungen es dabei im Zeitalter von Industrie 4.0 zu meistern gilt. KW - Warenidentifikation KW - Standardisierung KW - Digitalisierung KW - Identifikation KW - Ware KW - Standardisierung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1919 IS - 6 SP - 66 EP - 75 PB - AKWI ER - TY - CHAP A1 - Forstner, Robert A1 - Stauber, Stephan A1 - Herrmann, Frank T1 - Simulationsstudie zur sequentiellen Behälterversorgung in der automatischen Intralogistik T2 - Simulation in Produktion und Logistik 2017, September 20 - 22, 2017, Kassel, Germany N2 - After explaining the necessity of sequential sorting processes within branched conveyor systems and introducing basic sequential controlling principles, this paper analyses with a simulation study different ways of implementing sequential supply processes for small load carriers in an abstracted automated intralogistics system. Simulation results show that a layout with sequencing systems with explicit buffer places can ensure much higher sequential throughput performances than a layout with a loop for sequencing or a layout which implements sequencing processes just with the control of carrier sources. Because of sequential control dependencies in the layout with buffer places, further experiments for sequential supply processes with different layouts forms have to be assessed. KW - Förderanlage KW - Sortieranlage KW - Materialflusssteuerung KW - Transportbehälter KW - Simulation Y1 - 2017 UR - http://www.asim-fachtagung-spl.de/asim2017/papers/Proof_124_Forstner.pdf SP - 489 EP - 498 ER - TY - JOUR A1 - Loshaj, Albion A1 - Herrmann, Frank T1 - Entwicklung einer systemgestützten Stellplatzorganisation für die Werksversandstellen unter Berücksichtigung von variablen Märkten JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Gestaltung der Distributionsflächen der Werksversandstellen bei der BMW Group resultiert aus unterschiedlichen und meist werksspezifischen Gegebenheiten. Im Zuge eines Referenzprojektes sollen einheitliche Standards und Vorgehensweisen für die Entwicklung einer Stellplatzorganisation untersucht und festgelegt werden. Im Rahmen dieses Projekts wird analysiert, worauf bei einer Lagergestaltung im Allgemeinen zu achten ist und wie diese Kriterien im Falle der Werksversandstellen im Speziellen umgesetzt werden können. Zusätzlich behandelt dieses Projekt auch die computerunterstützte Betrachtung der Lager- bzw. Stellplatzverwaltung. KW - Distributionslogistik KW - Lagerplanung KW - Stellplatzorganisation KW - Stellplatzverwaltung KW - Stellplatzverwaltungssystem Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-1848 IS - 6 SP - 53 EP - 65 PB - AKWI ER - TY - CHAP A1 - Selmair, Maximilian A1 - Hanfeld, Marc A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Exploring Opportunities BT - Optimizing Production Planning by Factoring in Energy Procurement and Trading Options T2 - Simulation Notes Europe (SNE), Special Issue: Simulation in Production and Logistics: Impact of Energetic Factors N2 - Motivated by the increasing share of renewable energy in the markets for energy commodities, this study has evaluated the potential for optimizing production planning by taking into account disposable options for procuring energy, in this case electricity. For this purpose, a material flow simulation study extended by an electricity price simulation has been executed to examine possible cost scenarios. Our findings support the notion of a potential for further research in new optimization models involving energy procurement as well as energy trading options KW - Materialflussplanung KW - Energiebedarf KW - Optimierung KW - Simulation Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-2007 VL - 27 IS - 2 SP - 97 EP - 103 ER - TY - JOUR A1 - Trost, Marco A1 - Teich, Enrico A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Ein lineares Optimierungsmodell zur Hauptproduktionsprogrammplanung mit Berücksichtigung sozialer Größen JF - uwf UmweltWirtschaftsForum N2 - Aufgrund weniger existenter sozialorientierter Forschungen im Rahmen der Produktionsplanung und -steuerung stellt dieser Beitrag ein lineares Optimierungsmodell für die Hauptproduktionsprogrammplanung vor, welches soziale Kriterien berücksichtigt. Erste Ergebnisse deuten an, dass geringe Kosten nicht durch eine maximierte Mitarbeiterauslastung entstehen sondern durch geringe Kapazitätsschwankungen. KW - Sustainability KW - Social dimension KW - Production planning and control KW - Master production scheduling KW - Linear optimisation KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung KW - Personaleinsatz KW - Lineare Optimierung Y1 - 2017 U6 - https://doi.org/10.1007/s00550-017-0454-7 VL - 25 SP - 71 EP - 80 ER - TY - CHAP A1 - Vitzthum, Thorsten A1 - Claus, Thorsten A1 - Herrmann, Frank T1 - Einfluss von Mitarbeiterqualifikationszeiten im Rahmen nachhaltiger Produktionsplanung T2 - Simulation in Produktion und Logistik 2017, Kassel, 20.-22. September N2 - This research paper evaluates the potential of reducing shortages and costs that are created by training measures as an example for measurement of extended qualification of key employees in sustainable production planning. Capacity planning with standard methods in Enterprise Resource Planning Systems, namely priority rules, are used. Almost always, the optimal solution is not found, although there is one. In addition, unnecessarily high stocks are built up. In real business situations, this causes lost profits. T2 - Influence of Employee Qualification Times in the Context of Sustainable Production Planning KW - Enterprise-Resource-Planning KW - Produktionsplanung KW - Betriebliche Fortbildung Y1 - 2017 UR - http://www.asim-fachtagung-spl.de/asim2017/papers/Proof_111_Vitzthum.pdf SP - 315 EP - 324 ER - TY - CHAP A1 - Vitzthum, Thorsten A1 - Herrmann, Frank T1 - Evidence of the Relevance of Master Production Scheduling for Hierarchical Production Planning. T2 - Proceedings, 31st European Conference on Modelling and Simulation (ECMS) 2017, 23rd - May 26th, Budapest, Hungary N2 - This paper deals with the significance of master production scheduling for hierarchical production planning. Production planning in a typical manufacturing organization is a sequence of complex decisions which depends on a number of factors, such as number of products, complexity of products, number of production sites, and number of work centres in each production site. The main idea in hierarchical production planning is to break down larger problems into smaller, more manageable sub problems. Starting with aggregate production planning, the benefits of using master production scheduling for material requirements planning will be conveyed. The main benefit of master production scheduling is more detailed planning. The production groups are thereby disaggregated into final products and the production site disaggregated into work centres. In order to plan capacities, resource profiles are used. By working with resource profiles production lead time data are taken into account to provide time-phased projections of the capacity requirements for each work centre (Vollmann et al. 2005). The case study will show that more accurate planning and consideration of production lead time through master production scheduling results in a demand program that can be realized without shortages or delays. KW - Hierarchische Produktionsplanung KW - Fertigungsprogrammplanung Y1 - 2017 SN - 978-0-9932440-4-9 U6 - https://doi.org/10.7148/2017-0475 ER - TY - BOOK A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Materialbedarfsplanung und Ressourcenbelegungsplanung BT - Durchführung in Produktionsplanungs- und -steuerungssystemen und ihre Analyse KW - Materialbedarf KW - Produktionsplanung KW - Produktionssteuerung KW - PPS Y1 - 2017 SN - 978-3-658-12543-1 U6 - https://doi.org/10.1007/978-3-658-12543-1 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Souza Jr., Luis Antonio de A1 - Hook, Christian A1 - Papa, João Paulo A1 - Palm, Christoph T1 - Barrett's Esophagus Analysis Using SURF Features T2 - Bildverarbeitung für die Medizin 2017; Algorithmen - Systeme - Anwendungen. Proceedings des Workshops vom 12. bis 14. März 2017 in Heidelberg N2 - The development of adenocarcinoma in Barrett’s esophagus is difficult to detect by endoscopic surveillance of patients with signs of dysplasia. Computer assisted diagnosis of endoscopic images (CAD) could therefore be most helpful in the demarcation and classification of neoplastic lesions. In this study we tested the feasibility of a CAD method based on Speeded up Robust Feature Detection (SURF). A given database containing 100 images from 39 patients served as benchmark for feature based classification models. Half of the images had previously been diagnosed by five clinical experts as being ”cancerous”, the other half as ”non-cancerous”. Cancerous image regions had been visibly delineated (masked) by the clinicians. SURF features acquired from full images as well as from masked areas were utilized for the supervised training and testing of an SVM classifier. The predictive accuracy of the developed CAD system is illustrated by sensitivity and specificity values. The results based on full image matching where 0.78 (sensitivity) and 0.82 (specificity) were achieved, while the masked region approach generated results of 0.90 and 0.95, respectively. KW - Speiseröhrenkrankheit KW - Diagnose KW - Maschinelles Sehen KW - Automatische Klassifikation Y1 - 2017 U6 - https://doi.org/10.1007/978-3-662-54345-0_34 SP - 141 EP - 146 PB - Springer CY - Berlin ER - TY - CHAP A1 - Wöhl, Rebecca A1 - Huber, Michaela A1 - Loibl, Markus A1 - Riebschläger, Birgit A1 - Nerlich, Michael A1 - Palm, Christoph T1 - The Impact of Semi-Automated Segmentation and 3D Analysis on Testing New Osteosynthesis Material T2 - Bildverarbeitung für die Medizin 2017; Algorithmen - Systeme - Anwendungen; Proceedings des Workshops vom 12. bis 14. März 2017 in Heidelberg N2 - A new protocol for testing osteosynthesis material postoperatively combining semi-automated segmentation and 3D analysis of surface meshes is proposed. By various steps of transformation and measuring, objective data can be collected. In this study the specifications of a locking plate used for mediocarpal arthrodesis of the wrist were examined. The results show, that union of the lunate, triquetrum, hamate and capitate was achieved and that the plate is comparable to coexisting arthrodesis systems. Additionally, it was shown, that the complications detected correlate to the clinical outcome. In synopsis, this protocol is considered beneficial and should be taken into account in further studies. KW - Osteosynthese KW - Implantatwerkstoff KW - Materialprüfung KW - Bildsegmentierung KW - Dreidimensionale Bildverarbeitung Y1 - 2017 U6 - https://doi.org/10.1007/978-3-662-54345-0_30 SP - 122 EP - 127 PB - Springer CY - Berlin ER - TY - CHAP A1 - Souza Jr., Luis Antonio de A1 - Afonso, Luis Claudio Sugi A1 - Palm, Christoph A1 - Papa, João Paulo T1 - Barrett's Esophagus Identification Using Optimum-Path Forest T2 - Proceedings of the 30th Conference on Graphics, Patterns and Images Tutorials (SIBGRAPI-T 2017), Niterói, Rio de Janeiro, Brazil, 2017, 17-20 October N2 - Computer-assisted analysis of endoscopic images can be helpful to the automatic diagnosis and classification of neoplastic lesions. Barrett's esophagus (BE) is a common type of reflux that is not straight forward to be detected by endoscopic surveillance, thus being way susceptible to erroneous diagnosis, which can cause cancer when not treated properly. In this work, we introduce the Optimum-Path Forest (OPF) classifier to the task of automatic identification of Barrett'sesophagus, with promising results and outperforming the well known Support Vector Machines (SVM) in the aforementioned context. We consider describing endoscopic images by means of feature extractors based on key point information, such as the Speeded up Robust Features (SURF) and Scale-Invariant Feature Transform (SIFT), for further designing a bag-of-visual-wordsthat is used to feed both OPF and SVM classifiers. The best results were obtained by means of the OPF classifier for both feature extractors, with values lying on 0.732 (SURF) - 0.735(SIFT) for sensitivity, 0.782 (SURF) - 0.806 (SIFT) for specificity, and 0.738 (SURF) - 0.732 (SIFT) for the accuracy. KW - Speiseröhrenkrankheit KW - Diagnose KW - Maschinelles Lernen KW - Bilderkennung KW - Automatische Klassifikation Y1 - 2017 U6 - https://doi.org/10.1109/SIBGRAPI.2017.47 SP - 308 EP - 314 ER - TY - GEN A1 - Schroeder, Josef A. A1 - Semmelmann, Matthias A1 - Siegmund, Heiko A1 - Grafe, Claudia A1 - Evert, Matthias A1 - Palm, Christoph T1 - Improved interactive computer-assisted approach for evaluation of ultrastructural cilia abnormalities T2 - Ultrastructural Pathology KW - Zilie KW - Ultrastruktur KW - Anomalie KW - Bildverarbeitung KW - Computerunterstütztes Verfahren Y1 - 2017 U6 - https://doi.org/10.1080/01913123.2016.1270978 VL - 41 IS - 1 SP - 112 EP - 113 ER - TY - CHAP A1 - Mendel, Robert A1 - Ebigbo, Alanna A1 - Probst, Andreas A1 - Messmann, Helmut A1 - Palm, Christoph T1 - Barrett’s Esophagus Analysis Using Convolutional Neural Networks T2 - Bildverarbeitung für die Medizin 2017; Algorithmen - Systeme - Anwendungen. Proceedings des Workshops vom 12. bis 14. März 2017 in Heidelberg N2 - We propose an automatic approach for early detection of adenocarcinoma in the esophagus. High-definition endoscopic images (50 cancer, 50 Barrett) are partitioned into a dataset containing approximately equal amounts of patches showing cancerous and non-cancerous regions. A deep convolutional neural network is adapted to the data using a transfer learning approach. The final classification of an image is determined by at least one patch, for which the probability being a cancer patch exceeds a given threshold. The model was evaluated with leave one patient out cross-validation. With sensitivity and specificity of 0.94 and 0.88, respectively, our findings improve recently published results on the same image data base considerably. Furthermore, the visualization of the class probabilities of each individual patch indicates, that our approach might be extensible to the segmentation domain. KW - Speiseröhrenkrebs KW - Diagnose KW - Maschinelles Lernen KW - Bilderkennung KW - Automatische Klassifikation Y1 - 2017 U6 - https://doi.org/10.1007/978-3-662-54345-0_23 SP - 80 EP - 85 PB - Springer CY - Berlin ER - TY - JOUR A1 - Strahringer, Susanne A1 - Westner, Markus A1 - Kobus, Jörn T1 - Lean IT BT - Lean Management in IT-Organisationen JF - WISU - Das Wirtschaftsstudium KW - Informationstechnik KW - Lean Management Y1 - 2017 IS - 1 SP - 87 EP - 92 ER - TY - CHAP A1 - Westner, Markus T1 - Video-enhanced lectures in high-teaching-load environments with limited resources BT - benefits and challenges for lecturers and students T2 - Proceddings of the 11th International Technology, Education and Development Conference (INTED 2017), Valencia, Spain. 6-8 March N2 - Massive Open Online Courses (MOOCs) have been gaining a lot of attention in the last years. Those courses and their videos are often professionally produced and incorporate a significant investment of time and financial resources. In many cases such courses are “flagship” productions of the associated school or university and produced with budgets lecturers in other institutions do not have available. This makes the use of videos in a regular teaching environment challenging. In addition, lecturers often act in high-teaching-load environments further tightening their capacity constraints. This raises the question whether and how lecturers can benefit from videos in their lectures for increased teaching effectiveness while not sacrificing teaching efficiency. The paper at hand attempts to address this question by providing a critical perspective on the use of videos in a high-teaching-load environment characterized by little financial and staff resource availability. The paper thereby builds upon the three years’ experience of its author in using videos to enhance lectures in German tertiary education institutions in a multi-language, i.e., English and German, teaching environment. The presented findings are both relevant for teaching practice and research: lecturers may benefit from the presented ideas and experiences and may adopt them for their teaching. Researchers may find starting points for new research opportunities on the effectiveness and efficiency of video-enhanced lecturing and learning. The paper is organized as follows. Section 2 describes the context of the study from an institutional and technological perspective. Section 3 outlines the methodology applied and 4 how data was collected. Results from data analysis are presented in section 5. The paper concludes with a reflective summary and outlook in section 6. KW - Hochschulbildung KW - Massive Open Online Course KW - Videos KW - Screencasts Y1 - 2017 U6 - https://doi.org/10.21125/inted.2017.0168 SP - 197 EP - 207 ER - TY - CHAP A1 - Westner, Markus A1 - Kennedy, F. A1 - Furlong, A. T1 - Global student collaboration through international blended learning T2 - Proceedings of the 10th Annual International Conference of Education, Research and Innovation (ICERI2017), Seville, Spain. 16-18 November N2 - In today’s business, collaboration in globally distributed teams becomes more and more common. This is particularly the case in professional services and information systems (IS) where the immaterial nature of services makes globally distributed service creation easily possible. Consequently, companies expect that graduates have intercultural skills and that they are able to work in globally distributed teams, especially in professional services like consulting or in IS. However, management or IS curriculums often lack courses that teach those respective skills. The suggested course attempts to fill this gap through an innovative course design and delivery. The course intends to replicate a professional project environment in which the students are supposed to deliver a project as a joint international team. In the beginning of the course, students learn key aspects of project management, intercultural management, distributed collaboration, and the professional services industry in a self-paced manner through video lectures. Then they form teams, plan their project, and subsequently execute their project plan jointly. Instructors from the participating institutions supervise and coach the students. The project execution is supposed to resemble a business project with a meeting schedule, agreed deliverables, regular steering committees in which the instructors play the role of the clients. This paper outlines the concept of this international blended-teaching course. It suggests potential learning objectives, a course description, a teaching syllabus, and an assessment framework. KW - Blended learning KW - Global collaboration KW - Distributed teams KW - Integriertes Lernen KW - Internationale Kooperation KW - Virtuelles Team Y1 - 2017 U6 - https://doi.org/10.21125/iceri.2017.2030 SP - 7625 EP - 7631 ER - TY - CHAP A1 - Sonnleitner, Daniel A1 - Westner, Markus T1 - Quo vadis IT infrastructure BT - decision support for cloud computing adoption from a business perspective T2 - Proceedings of the 22nd UKAIS Conference : Ubiquitous Information Systems: Surviving and thriving in a connected society, 2017 Oxford, April 3rd-5th 2017 N2 - Many IT organizations are confronted with the question whether to modernize their IT infrastructure. While most data centers run on a virtualized environment, Cloud Computing technology emerges with new characteristics on fast provision of standardized resources in a scalable IT infrastructure. Public cloud vendors offer IT services on demand, so that IT organizations do not have to operate their own hardware. Moreover, private cloud architectures gain influence, claiming to provide flexible and elastic IT infrastructure. The paper at hand guides the strategic decision for adoption of Cloud Computing on IT infrastructure. Therefore, we first introduce a taxonomy for IT infrastructure encompassing a technological and a sourcing perspective. Second, we evaluate selective areas of the taxonomy adopting the SWOT framework to understand both opportunities and challenges of Cloud Computing for IT infrastructure from a business perspective. KW - Cloud Computing KW - Cloud Adoption KW - Cloud Migration KW - SWOT KW - Infrastructure as a Service KW - IT Infrastructure KW - Cloud Computing KW - IT-Abteilung KW - Outsourcing KW - Service-Rechenzentrum Y1 - 2017 ER -