TY - GEN A1 - Gutbrod, Max A1 - Rauber, David A1 - Weber Nunes, Danilo A1 - Palm, Christoph T1 - OpenMIBOOD's classification models for the MIDOG, PhaKIR, and OASIS-3 benchmarks [Data set] N2 - These models are provided for evaluating post-hoc out-of-distribution methods on the three OpenMIBOOD benchmarks: MIDOG, PhaKIR, and OASIS-3. When using these models, make sure to give appropriate credit and cite the OpenMIBOOD publication. Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.14982267 N1 - Software Repository URL https://github.com/remic-othr/OpenMIBOOD ER - TY - GEN A1 - Gutbrod, Max A1 - Rauber, David A1 - Weber Nunes, Danilo A1 - Palm, Christoph T1 - Cropped single instrument frames subset from Cholec80 [Data set] N2 - This dataset is a subset of the original Cholec80 dataset and is used by the OpenMIBOOD framework to evaluate a specific out-of-distribution setting. When using this dataset, it is mandatory to cite the corresponding publication (OpenMIBOOD) and to follow the acknowledgement and citation requirements of the original dataset (Cholec80). The original Cholec80 dataset (associated paper,Homepage) consists of 80 cholecystectomy surgery videos recorded at 25 fps, performed by 13 surgeons. It includes phase annotations (25 fps) and tool presence labels (1 fps), with phase definitions provided by a senior surgeon. A tool is considered present if at least half of its tip is visible. The dataset categorizes tools into seven types: Grasper, Bipolar, Hook, Scissors, Clipper, Irrigator, and Specimen bag. Multiple tools may be present in each frame. Additionally, 76 of the 80 videos exhibit a strong black vignette. For this dataset subset, frames were extracted based on tool presence labels, selecting only those containing Grasper, Bipolar, Hook, or Clipper while ensuring that only a single tool appears per frame. To enhance visual consistency, the black vignette was removed by extracting an inner rectangular region, where applicable. KW - Tool Presence Detection KW - Cholecystectomy KW - Laparoscopic KW - Deep Learning KW - Out-Of-Distribution Detection Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.14921670 N1 - Related works Is derived from Journal article: 10.1109/TMI.2016.2593957 Software Repository URL https://github.com/remic-othr/OpenMIBOOD ER - TY - GEN A1 - Kriegl, Raphael T1 - Sessile droplet fitting (Version v1.0b) [Data set] Y1 - 2022 U6 - https://doi.org/10.5281/zenodo.7464158 N1 - Related works: is supplement to https://github.com/rk-exxec/sessile_droplet_fitting/tree/v1.0b (URL) ER - TY - RPRT A1 - Finckh, Wolfgang A1 - Aicher, Magdalena T1 - Vergleich verschiedener Berechnungsverfahren von Pfahlkopfplatten N2 - Der Bericht beschäftigt sich mit dem Vergleich verschiedener Berechnungsverfahren zur Bemessung von Pfahlkopfplatten. Im Rahmen eines konkreten Berechnungsbeispiels, werden das klassisch ebene Stabwerkmodell, ein räumliches Stabwerkmodell und eine computergestützte Berechnungsmethode mittels der 3D-Detail-Anwendung von IDEA StatiCa angewendet und im Anschluss analysiert und miteinander verglichen. Die Ergebnisse zeigen, dass ebene Stabwerkmodelle auch bei räumlichem Tragverhalten eine wirtschaftliche Bemessung ermöglichen können. Durch ihre idealisierten Annahmen eigenen sie sich besonders für eine effiziente Vorbemessung bei vergleichsweise geringem Aufwand. Demgegenüber erfassen räumliche Stabwerkmodelle den Kraftfluss deutlich präziser, erlauben die realitätsnahe Identifikation kritischer Beanspruchungszonen und berücksichtigen komplexe Tragmechanismen. Der erhöhte Modellierungsaufwand sowie die eingeschränkte normative Grundlage führen jedoch zu konservativen Annahmen, insbesondere bei der Bemessung räumlicher Knotenbereiche. Mit der 3D-Detail-Anwendung bietet IDEA StatiCa ein sehr genaues, umfangreiches und norm-gerechtes Bemessungstool für Diskontinuitätsbereiche. Die grafische Aufbereitung der Ergebnisse ist übersichtlich gestaltet, jedoch bleiben die zugrundeliegenden Rechenschritte für den Anwender kaum nachvollziehbar. Da es sich um eine noch junge Software handelt, ist auch die Verfügbarkeit von Fachinformation, insbesondere zur Fehlerdiagnose oder bei Anwendungsfragen, derzeit noch eingeschränkt. Insgesamt weisen alle untersuchten Methoden spezifische Vor- und Nachteile auf. Zum Zeitpunkt dieser Arbeit erscheint eine Kombination aus einer Vorbemessung mit ebener Stabwerkmodellen und eine anschließende räumliche Bemessung mittels IDEA StatiCa als sinnvoll. Für die wirtschaftliche Anwendung räumlicher Stabwerkmodelle besteht weiterhin Entwicklungsbedarf, insbesondere hinsichtlich standardisierter Knotentypen und deren praktikabler Bemessung. Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-88708 CY - Regensburg ER - TY - THES A1 - Paric, Ivan T1 - Erfassung und in situ Aussteuerung der rheologischen Eigenschaften von SVB N2 - Diese Arbeit diskutiert den Einsatz eines neuen rheologischen Messsystems. Die rheologischen Untersuchungen finden unmittelbar nach der Herstellung im Mischer statt. Mischungen verschiedener SVB-Rezepturen wurden mit variierenden w/z-Werten hergestellt. Die einzelnen rheologischen Messergebnisse liefern aneinandergereiht Kennlinien. Solche Kennlinien erlauben die zahlenmäßige Definition einer angestrebten Konsistenz. Zusätzlich wurden Kennlinien mit Fließmitteln und Stabilisierern generiert. Diese Kennlinien bilden eine Art Wissensdatenbank für die untersuchte Rezeptur. Ein neu entwickelter Algorithmus kann die rheologischen Messwerte einer aktuellen Mischung mit der jeweiligen Wissensdatenbank vergleichen. Bei Abweichungen von der angestrebten Konsistenz berechnet das Aussteuerungssystem die Art und Menge einer zusätzlich erforderlichen Komponente. Versuchsserien an SVBs mit abweichender Konsistenz belegen die erfolgreichen Aussteuerungen mit Wasser oder Zusatzmittel. KW - Selbstverdichtender Beton KW - Rheologie KW - Konsistenz KW - Viskosität KW - Fließgrenze Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:294-104639 CY - Bochum ER - TY - JOUR A1 - Kraus, Richard A1 - Knipfer, Maximilian A1 - Jacob, Matthias A1 - Kienninger, Baerbel A1 - Alikhani, Jasmine A1 - Ghamsary, Parham Heydarzadeh A1 - Reinker, Lukas A1 - Adler, Ina A1 - Dendorfer, Sebastian A1 - Kieninger, Martin T1 - Effectiveness and safety of techniques for cervical spine immobilization in mountain rescue JF - Scandinavian Journal of Trauma, Resuscitation and Emergency Medicine N2 - Background Cervical spine injuries in alpine sports require immediate immobilization at the site of the accident to avoid possible secondary damage caused by transportation. Using special sensor technology, this study investigated whether a cervical spine orthosis (cervical collar, Stifneck collar (Laerdal Medical GmbH, Puchheim, Germany)) provides greater stability than a vacuum mattress alone. Methods Using one male test person, we simulated transporting a patient with a spinal injury in steep alpine terrain. A wireless motion capture system (Xsens Technologies, Movella™ Inc., Henderson, USA) was used to record motion in three-dimensional space within a standardized environment. All tests were performed on a set course by the Bavarian Mountain Rescue Service. The test person lay on a mountain rescue stretcher and was immobilized with a vacuum mattress, either with or without a cervical orthosis. The axes of cervical spine movements were analyzed separately. Results There were no significant differences between immobilization with and without a cervical orthosis with regard to lateral flexion (max. 3.7° compared to 3.0°) in the frontal plane and maximum excursion in flexion (max. 1.6° compared to 2.8°) or extension (max. -1.6° compared to -1.7°). There was significantly greater rotation movement around the craniocaudal axis without an orthosis (max. 2.4° compared to 1.3°). Conclusion During mountain rescues, the cervical spine can be immobilized without a rigid cervical spine orthosis. Future research should explore the fundamental benefits of cervical spine immobilization, while the findings of this work contribute to the safe care of patients by avoiding the disadvantages associated with rigid cervical orthoses. KW - Mountain rescue KW - Orthosis KW - Cervical spine KW - Immobilization KW - Vacuum mattress Y1 - 2026 U6 - https://doi.org/10.1186/s13049-025-01530-z VL - 34 PB - Springer ER - TY - GEN A1 - Michel, Johanna A1 - Krenkel, Lars T1 - Experimental Investigation of Shear-Induced Generation of Respiratory Aerosol: Simultaneous Measurements of Particle Quantities and Wave Topology T2 - 2nd European Fluid Dynamics Conference (EFDC2), 26-29 August 2025, Dublin, Ireland N2 - Despite the high level of attention on infectious respiratory aerosol during the Covid19 pandemic, little is known about the processes how these particles form inside the respiratory system. Understanding the underlying fluid mechanical processes and their influencing factors would enable the development of drugs to suppress the generation of infectious aerosol. In the proposed work, we focus on the shear-induced mechanism of aerosol generation, which is supposed to occur mostly in the larger airways during coughing. In this process, high air velocities trigger Kelvin-Helmholtz waves in the mucus film, which lines the air vessels. Through a series of instabilities, particles detach from the crest of these waves. In the proposed work, we investigate the process of shear-induced aerosol generation in idealized experiments where we vary the air-flow characteristics and the properties of the mucus fluid. Our central aim here is to deduct an empirical model of the quantity and size distribution of generated particles depending on the mucus rheology and the local shear flow. Further, we observe the wave topology to better understand the coupling between the air flow and the waves. In our experimental setup, we measure the quantity of created particles and the emerging waves simultaneously. To ensure controllable conditions, we simplify the complex flow conditions in the airways. We use a rectangular channel with the bottom wall covered in a mucus mimetic. The mucus mimetic fluid is a synthetic hydrogel developed to recreate the viscoelastic properties and low surface tensions of the mucus. Filtered pressurized air is guided through the channel to trigger shear-induced aerosol generation. After passing the mucus mimetic, the air enters into a collection chamber from where particles are sampled continuously by an aerosol spectrometer. To measure wave topology, we use planar laser induced fluorescence. For this, we stain the mucus mimetic with fluorescent dyes and illuminate a line on the surface of the fluid film with a 532 nm laser. A high-resolution camera captures the resulting fluorescent glow of the mucus mimetic. Figure 1 presents exemplary wave topology results from the experiments, employing varying air flow volume rates, mucus mimetic gel properties, and different configurations of the laser and camera. The resulting wave topologies exhibit significant variation. For the conference, we will conduct parameter studies of the particle quantities and wave topology while varying the mucus mimetic properties and the flow rate of the air. Additionally, we will present grid projection-based techniques to extend the single-line wave measurements and asses the entire surface of the mucus film. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-88593 ER - TY - CHAP A1 - Galka, Stefan A1 - Strassburger, Steffen A1 - Lang, Sebastian A1 - Reggelin, Tobias ED - Bui, Tung T1 - Introduction to the Minitrack on Simulation Modeling and Digital Twins for Decision Making in the Age of Industry 4.0 T2 - Proceedings of the 57th Hawaii International Conference on System Sciences (HICSS), January3-6, 2024, Honolulu, Hawaii N2 - The minitrack contains contributions with a focus on simulation modeling and digital twins and decision making in the context of Industry 4.0. The use of simulation models and digital twins is manifold, from planning to virtual commission and real-time operational decision support. Cyber-physical systems integrate the real world and the virtual world to enable decision making in the age of Industry 4.0. For example, customer decisions and supply disruptions which directly influence manufacturing and logistics systems require immediate decisions. Thus, models must have the capability to support decision making in manufacturing as well as in internal and external logistics in real-time. Methods include discrete-event simulation, discrete-rate simulation, hybrid simulation, system dynamics simulation, the combination of simulation modeling with machine learning or optimization heuristics, prescriptive analytics, and adaptive systems. Furthermore, this minitrack addresses simulation education and simulation models used for education and training in manufacturing and logistics. Y1 - 2024 SN - 978-0-9981331-7-1 U6 - https://doi.org/10.24251/HICSS.2024.206 SP - 1647 EP - 1648 PB - ScholarSpace ER - TY - CHAP A1 - Bock, Sebastian A1 - Schwarz, Philipp A1 - Weiß, Martin G. ED - Yang, Xin-She T1 - U-Shape Phenomenon with Gaussian Noise and Clipped Inputs T2 - Proceedings of Eighth International Congress on Information and Communication Technology. - (ICICT 2023, London, Volume 3) N2 - Object detection and recognition is a core task in machine vision. Both the position and the rotation of the objects are of interest. Common algorithms for object recognition based on neural networks use a regression formulation and are aimed at changing environments. In industrial applications, the setting is different: One would like to determine with high accuracy, the pose of known objects. We are investigating a prototype application in this field, where we identify the rotation of an object in a plane. We use common network architectures and provide an overview of how well they are suited for this purpose. In addition, we compare our results with standard image processing algorithms, paying particular attention to the accuracy with metrics relevant in the industry. Moreover, an U-shape phenomenon with disturbed data occurred during the experiments, which is partially explained analytically. KW - Neural networks KW - Pose estimation KW - U-shape Y1 - 2023 SN - 978-981-99-3042-5 U6 - https://doi.org/10.1007/978-981-99-3043-2_45 SP - 569 EP - 579 PB - Springer CY - Singapore ER - TY - JOUR A1 - Zellner, Gregor T1 - Ein Grundriss der Wissenschaftsdisziplin Wirtschaftsinformatik JF - BIT Banking and Information Technology N2 - Dieser Beitrag gibt einen Grundriss der Wissenschaftsdisziplin Wirtschaftsinformatik (WI) und ihrer Entwicklung. Hierzu wird zunächst der Gegenstand der WI näher betrachtet, nämlich die Informationssysteme. Dann wird erläutert, welche Ziele die WI verfolgt. Da WI ein interdisziplinäres Fach ist, werden anschließend die bestimmenden Basiswissenschaften der WI im Rahmen des Grundsystems der Wissenschaften dargestellt. Dabei wird deutlich, dass der Einfluss unterschiedlicher Disziplinen den Methodenpluralismus in der WI befördert. Im Beitrag werden die zwei grundlegenden Forschungsparadigmen in Form des verhaltensorientierten und des gestaltungsorientierten Ansatzes näher betrachtet. Nach einem kurzen Einblick in die zeitliche Entwicklung der deutschsprachigen WI werden die Themen-und Tätigkeitsfelder der WI näher erörtert. Abschließend wird ein Ausblick auf die Herausforderungen in der WI gegeben. KW - Wissenschaftsdisziplin Wirtschaftsinformatik Y1 - 2024 VL - Band 25, März 2024 IS - 1 ER - TY - JOUR A1 - Ortner, Martina A1 - Kökten, Rabia T1 - Rechtsextremismus transnational betrachtet : das Forschungsprojekt zur Ülkücü-Bewegung in Bayern stellt sich vor JF - RadiX – Zeitschrift für Radikalisierungsforschung und Prävention N2 - Deutschland ist eine postmigrantische Gesellschaft. Die damit einhergehende Pluralität beschränkt sich nicht nur auf Herkünfte und Biografien, sondern spiegelt sich auch in Lebensentwürfen und politischen Einstellungen wider, die nicht nur demokratisch, sondern menschenverachtend-völkisch und antidemokratisch sein können. Im Projekt ReTra geht es darum, mehr über Strukturen, Akteur:innen und Aktivitäten von türkischen extrem rechten Organisationen in Bayern zu erfahren. Dabei wird der Einfluss von politischen Veränderungen in der Türkei miteinbezogen. Das Projekt leistet einen Beitrag zur Rechtsextremismusforschung unter Berücksichtigung sich aufspannender transnationaler sozialer Räume. Die qualitative Studie wird ergänzt durch einen partizipativen Forschungsansatz, in dem zivilgesellschaftlich Aktive als Co-Forschende einbezogen werden. Fortlaufend wird die Fachdiskussion mit einschlägigen Wissenschaftler:innen geführt. So entsteht ein Netzwerk, durch das ein kontinuierlicher Forschungs-Praxis Austausch ermöglicht wird. Durch eine Handreichung leistet das Projekt einen Beitrag für die zivilgesellschaftliche Praxis und darüber hinaus für ein demokratisches Miteinander. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84211 SN - 2944-1382 N1 - Online First-Beitrag VL - 1 IS - 2 PB - Verlag Barbara Budrich ER - TY - JOUR A1 - Zellner, Gregor A1 - Paul, Dennis T1 - Ein strukturierter Vergleich ausgewählter Process Mining Tools JF - BIT Banking and Information Technology N2 - Die Notwendigkeit zur Optimierung und Automatisierung von Ablaufen in Unternehmen nimmt mit zunehmender Digitalisierung an Fahrt auf. Zur Unterstützung dieses Trends haben sich in den letzten Jahren einige Tools im Themenbereich Process Mining entwickelt und etabliert. Ziel dieser Untersuchung ist es, systematisch ausgewählte Tools anhand eines vorhandenen, aber weiterentwickelten Kriterienkatalogs zu vergleichen und damit dem Anwender eine strukturierte Einsicht in den aktuellen Markt der Process Mining Tools zu geben. Aus einer Auswahl von 44 Tools werden acht Tools genauer untersucht. Die letztendliche Auswahl hängt von vielen unternehmensindividuellen Faktoren ab, so dass kein pauschaler Vorschlag für das geeignetste Tool gegeben werden kann. KW - Process Mining KW - Vergleich KW - Tools Y1 - 2023 VL - Band 24, Oktober 2023 IS - 2 ER - TY - THES A1 - Eigenberger, Andreas T1 - Die Auswirkungen der mechanischen Kräfte eines innovativen Operationsverfahrens für die intraoperative Gewebezubereitung bei autologem Fetttransfer auf das Fettgewebe und dessen Stammzellen Y1 - 2024 SP - 235 Blätter CY - Regensburg ER - TY - JOUR A1 - Empacher, Christina A1 - Kamps, Udo A1 - Schmiedt, Anja Bettina T1 - Prediction intervals for future Pareto record claims JF - European Actuarial Journal N2 - Stochastic models and methods for quantifying extreme events are of interest in numerous disciplines. Within this paper, statistical prediction of extreme claims or losses in insurance industry is considered based on upper record values, which describe successively largest observations in a sequence of data over time. The problem of predicting a future record value (here in particular, a future record claim) based on a sequence of previously observed record values (here, past record claims) is addressed by means of prediction intervals. For an underlying Pareto distribution, respective exact and approximate intervals from the literature are summarized and modified and new ones are developed. In a simulation study, these prediction intervals are evaluated and compared regarding coverage frequency and length. The impact of the number of observed record values as well as the choice of the Pareto distribution is discussed. In the case of a small number of record values, the use of k-th record values is considered as an option for statistical analyses to predict, e.g., second largest record claims. Selected prediction methods are applied to several real data sets, which turn out to perform well and to be able to capture the magnitude of future record claims, even for fairly small numbers of record observations. For comparison, generalized Pareto distributions are fitted to real data sets and a corresponding point predictor as well as a respective upper prediction interval for the next record to appear are derived and evaluated. Y1 - 2024 U6 - https://doi.org/10.1007/s13385-024-00397-1 SN - 2190-9733 VL - 15 IS - 1 SP - 163 EP - 197 PB - Springer ER - TY - RPRT A1 - Schuhegger, Lukas A1 - Galka, Stefan T1 - Herausforderungen von produzierenden Startups N2 - Startups bringen mit ihrer Dynamik und neuen innovativen Geschäftsmodellen frischen Wind in die deutsche Unternehmenslandschaft. Die disruptiven Ansätze gestalten die Zukunft und damit geraten sie immer weiter in den Fokus, unter anderem auch für Investoren. Das Ziel der Studie ist es, Zusammenhänge zwischen Herausforderungen und Eigenschaften von produzierenden Startups darzulegen. Dieses Wissen soll an andere Startups weitergegeben werden, um die Erfolgschancen in der Gründerszene zu erhöhen. Im Juli 2021 wurde hierzu eine Umfrage entworfen, um die Erfahrungen von Gründern und Startup-Mitarbeitern zu sammeln und die spezifischen Herausforderungen besser zu verstehen. KW - Unternehmensgründung KW - Produktion KW - Studie KW - Logistik KW - Herausforderungen KW - Herausforderung bei der Gründung KW - Technologie Start-ups KW - Hochlauf KW - Phasenmodell Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-88520 ER - TY - GEN A1 - Rueckert, Tobias A1 - Rauber, David A1 - Klausmann, Leonard A1 - Gutbrod, Max A1 - Rueckert, Daniel A1 - Feussner, Hubertus A1 - Wilhelm, Dirk A1 - Palm, Christoph T1 - PhaKIR Dataset - Surgical Procedure Phase, Keypoint, and Instrument Recognition [Data set] N2 - Note: A script for extracting the individual frames from the video files while preserving the challenge-compliant directory structure and frame-to-mask naming conventions is available on GitHub and can be accessed here: https://github.com/remic-othr/PhaKIR_Dataset. The dataset is described in the following publications: Rueckert, Tobias et al.: Comparative validation of surgical phase recognition, instrument keypoint estimation, and instrument instance segmentation in endoscopy: Results of the PhaKIR 2024 challenge. arXiv preprint, https://arxiv.org/abs/2507.16559. 2025. Rueckert, Tobias et al.: Video Dataset for Surgical Phase, Keypoint, and Instrument Recognition in Laparoscopic Surgery (PhaKIR). arXiv preprint, https://arxiv.org/abs/2511.06549. 2025. The proposed dataset was used as the training dataset in the PhaKIR challenge (https://phakir.re-mic.de/) as part of EndoVis-2024 at MICCAI 2024 and consists of eight real-world videos of human cholecystectomies ranging from 23 to 60 minutes in duration. The procedures were performed by experienced physicians, and the videos were recorded in three hospitals. In addition to existing datasets, our annotations provide pixel-wise instance segmentation masks of surgical instruments for a total of 19 categories, coordinates of relevant instrument keypoints (instrument tip(s), shaft-tip transition, shaft), both at an interval of one frame per second, and specifications regarding the intervention phases for a total of eight different phase categories for each individual frame in one dataset and thus comprehensively cover instrument localization and the context of the operation. Furthermore, the provision of the complete video sequences offers the opportunity to include the temporal information regarding the respective tasks and thus further optimize the resulting methods and outcomes. Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.15740620 ER - TY - GEN A1 - Hauer, Franziska A1 - Schultz, Maximilian A1 - Haug, Sonja A1 - Weber, Karsten T1 - Künstliche Intelligenz in Nichtregierungsorganisationen - quantitativer Datensatz [Data set] N2 - Künstliche Intelligenz (KI) stellt ein wichtiges Thema der Digitalisierung dar und hat das Potenzial viele Arbeitsfelder grundlegend zu verändern. Mit dem Einsatz von KI wird die Hoffnung verbunden durch Automatisierung Zeit und Geld zu sparen. Dies könnte besonders interessant für Organisationen sein, die wenig Ressourcen zur Verfügung haben, da sie nicht gewinnorientiert oder ehrenamtlich arbeiten. Dazu zählen Nichtregierungsorganisationen (NRO), die einen wichtigen Bestandteil der Zivilgesellschaft darstellen. Aufgrund der komplexer werdenden Arbeit von NROs scheint KI Möglichkeiten zur Bewältigung aktueller und zukünftiger Herausforderungen zu bieten. Über den Einsatz von KI in NROs ist derzeit jedoch wenig bekannt. Es wurde eine quantitative Querschnittstudie deutscher Nichtregierungsorganisationen (NRO) zum Thema KI durchgeführt. Der Web-Survey baut auf den Erkenntnissen des Scoping Reviews und der qualitativen Interviews auf und vertieft den Einblick in die Bereiche aktuelle Nutzung von KI, Wissenstand in den Organisationen sowie vorhandene und noch benötigte Ressourcen. Dafür wurden 343 NROs verschiedener Größen und Handlungsfelder befragt und die Ergebnisse quantitativ analysiert. Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.17977270 N1 - Related works: Continues Working paper: 10.13140/RG.2.2.21668.69765 (DOI) Working paper: 10.13140/RG.2.2.10671.75685/1(DOI) Is continued by Working paper: 10.13140/RG.2.2.25460.46720 (DOI) Is described by Working paper: 10.13140/RG.2.2.11094.66883 (DOI) Journal article: 10.5771/1613-0707-2025-5-35 (DOI) Is referenced by Conference paper: 10.3233/SHTI250172 (DOI) ER - TY - GEN A1 - Haug, Sonja A1 - Currle, Edda A1 - Weber, Karsten T1 - Künstliche Intelligenz und Anamnese (KI-Anamnese) - Datensätze Welle 1 und Welle 2 [Data set] N2 - Die Studie stützt sich auf eine Quotenstichprobe der deutschsprachigen Bevölkerung im Alter von 18 bis 74 Jahren. Sie wurde als Längsschnittstudie (Trendstudie) mit insgesamt zwei Wellen mit dem gleichen Fragebogen durchgeführt. Welle 1 war vom 18. bis 24. November 2024 im Feld, die zweite Befragungswelle vom 13. bis 17. November 2025. Mit der Datenerhebung wurde das Umfrageinstitut NielsenIQ-GfK beauftragt. Je 1.000 Personen wurden online im Rahmen des GfK eBUS®-Deutschland befragt. Die Teilnehmenden wurden mithilfe einer Kombination aus Online- und Offline-Methoden rekrutiert. Um eine möglichst genaue Abbildung der Grundgesamtheit zu gewährleisten, wurden die Merkmale Geschlecht, Alter, Region, Haushaltsgröße, Ortsgröße sowie der Bildungsstand des Haushaltsvorstands quotiert, etwaige Abweichungen durch ein iteratives Gewichtungsverfahren ausgeglichen. Der Fragebogen besteht aus neun standardisierten Fragen; zuzüglich wurden soziodemographische Merkmale erhoben. Einzelne Fragen wurden, zum Teil übersetzt sowie abgewandelt, aus anderen Studien übernommen. KW - Anamnese KW - Bevölkerungsumfrage KW - Künstliche Intelligenz KW - Technologieakzeptanz Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.18017447 N1 - Related works: Is described by Other: 10.35096/othr/pub-8707 (DOI) Is metadata for Journal: 10.1016/j.zefq.2025.10.003 (DOI) ER - TY - GEN A1 - Gutbrod, Max A1 - Rauber, David A1 - Weber Nunes, Danilo A1 - Palm, Christoph T1 - A cleaned subset of the first five CATARACTS test videos [Data set] N2 - This dataset is a subset of the original CATARACTS test dataset and is used by the OpenMIBOOD framework to evaluate a specific out-of-distribution setting. When using this dataset, it is mandatory to cite the corresponding publication (OpenMIBOOD (10.1109/CVPR52734.2025.02410)) and follow the acknowledgement and citation requirements of the original dataset (CATARACTS). The original CATARACTS dataset (associated publication,Homepage) consists of 50 videos of cataract surgeries, split into 25 train and 25 test videos. This subset contains the frames of the first 5 test videos. Further, black frames at the beginning of each video were removed. Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.14924735 N1 - Related works: Is derived from: Dataset: 10.21227/ac97-8m18 (DOI) Software: Repository URL: https://github.com/remic-othr/OpenMIBOOD ER - TY - CHAP A1 - Hammer, Pascal A1 - Mottok, Jürgen A1 - Krause, Veronika A1 - Probst, Tobias T1 - Approach for High-Performance Random Number Generators for Critical Systems T2 - Proceeding of the 12th European Congress on Embedded Real Time Software and Systems (ERTS2024) , Toulouse, 11-12 June 2024 N2 - In times of digitalization, the encryption and signing of sensitive data is becoming increasingly important. These cryptographic processes require large quantities of high-quality random numbers. Which is why a high-performance random number generator (RNG) is to be developed. For this purpose, existing concepts of RNGs and application standards are first analyzed. The proposed approach is to design a physical true random number generator (PTRNG) with a high output of random numbers. Based on this, the development begins with the analog part of the RNG, the noise signal source and a suitable amplifier for the analog noise signal. Therefore, a special noise diode from Noisecom and an amplifier from NXP were chosen and analyzed in different measurements. From the results of the measurements, it can be concluded that both components are suitable for use in the RNG. Y1 - 2024 U6 - https://doi.org/10.5281/zenodo.14848832 N1 - Identifier: hal-04678880 , version 1 ER - TY - GEN A1 - Haug, Sonja A1 - Vetter, Miriam A1 - Dotter, Caroline A1 - Weber, Karsten T1 - Forschungsprojekt "EVEKT "Erhöhung der Verbraucherpartizipation an der Energiewende und datenbasierte Mehrwertdienste" — Datensatz [Data set] N2 - Um Leistungsschwankungen im Stromnetz durch fluktuierende erneuerbare Energien auszugleichen, sollen in Deutschland intelligente Messtechnologien in Privathaushalten verbaut werden. Diese gelten als zentraler Bestandteil sog. Smart-Grids (intelligente Stromnetze), die Stromnachfrage und -angebot steuern, um Stromnetzstabilität zu gewährleisten. Die Werte, die bei der Messung des Stromverbrauchs in Privathaushalten erhoben werden, können an die Verbraucher*innen mithilfe von Apps oder anderer Smart-Meter-Plattformen (datenbasierte Mehrwertdienste) rückgemeldet werden. Vor diesem Hintergrund wurde 2023 eine Online-Befragung der Wohnbevölkerung in Deutschland durchgeführt (n=2.027). Untersucht wurden Bekanntheit, Nutzungsbereitschaft und Akzeptanz intelligenter Stromzähler bzw. Smart-Meter sowie die Nutzungsintention bei Anwendungsszenarien und Datenschutzbedenken. KW - Smart Meter KW - Technikfolgenabschätzung KW - Energiesparen KW - Datenschutzsorgen KW - Bevölkerungsbefragung KW - Akzeptanz Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.17962728 N1 - Related works: Is derived from: Working paper: 10.13140/RG.2.2.11998.72009 (DOI) Working paper: 10.13140/RG.2.2.11159.85925 (DOI) Is described by: Other: 10.35096/othr/pub-8740 (DOI) Is metadata for: Working paper: 10.13140/RG.2.2.33227.60968 (DOI) Project deliverable: 10.34657/20059 (DOI) Working paper: 10.13140/RG.2.2.17667.11043 (DOI) Journal: 10.1007/s11623-025-2065-8 Titel anhand dieser DOI in Citavi-Projekt übernehmen (DOI) ER - TY - INPR A1 - Feeß, Alexander A1 - Weiß, Martin T1 - Analysis of a Cuspidal 6R Robot N2 - We present a theoretical and numerical analysis of the kinematics for the Transpressor, a cuspidal 6R robot. It admits up to 16 inverse kinematics solutions which are described geometrically. For special target poses, we provide the solutions analytically and present a simple numerical solver for the general case. Moreover, an analytical estimate of the Jacobian determinant on a path between two solutions proves cuspidality for a class of robots similar to the transpressor. KW - Kinematik KW - Industrierobotik KW - inverse kinematics KW - kinematic singularities Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-88626 CY - Regensburg ER - TY - INPR A1 - Feeß, Alexander A1 - Weiß, Martin T1 - Uniqueness Domains of Offset Wrist Robots via a 4D Workspace Representation N2 - We present a new method for studying the workspace of 6R robots using a four-dimensional representation. This is applied to numerically determine connected workspace components with a constant number of solutions of the inverse kinematics, and to describe critical values that form the boundaries these regions. To define and maximize uniqueness domains, nonsingular transition of these boundaries are investigated. This provides a method to determine workspace regions in which the robot can move avoiding configuration changes and singularities. KW - kinematic workspace analysis KW - kinematic singularities KW - cuspidal robot Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-88635 CY - Regensburg ER - TY - THES A1 - Thumann, Maria T1 - Anpassung der Verarbeitungseigenschaften von Frischbetonmischungen für die Entwicklung von Spritzbetonen mit reduziertem Versinterungspotential N2 - In nicht druckwasserhaltenden Tunnelbauwerken wird das Bergwasser über Entwässerungs� systeme gesammelt und aus dem Bauwerk geleitet. Versinterungen der Drainageleitungen des sekundären Entwässerungssystems führen zu Querschnittsverminderungen und -verschlüssen, wodurch die gezielte Ableitung des Bergwassers aus dem Bauwerk gestört wird. Zur Vermeidung von Schäden am Tunnelbauwerk oder von Wassereintritten in den Tunnel, aufgrund eines Anstiegs des Bergwasserdrucks hinter der Innenschale, sind regelmäßige Reinigungsarbeiten erforderlich. Die Reinigung der Drainageleitungen ist häufig sehr kosten� intensiv und führt zu Verkehrsbehinderungen in den Tunneln. Die Entstehung von Versinterungen wird durch die chemisch-physikalische Zusammensetzung des Bergwassers, die Umgebungsbedingungen im Bereich des Tunnels, die Ausführung des Entwässerungssystems und den Kontakt des Bergwassers mit zementgebundenen Materialien, z. B. dem Spritzbeton, beeinflusst. Ein Ansatz, um die Entstehung von Versinterungen zu reduzieren, ist die Optimierung der Spritzbetonrezeptur. Die Änderung der Rezeptur� zusammensetzung beeinflusst aber auch die Verarbeitbarkeit der Frischbetonmischung, die Frühfestigkeitsentwicklung des jungen Spritzbetons und die Festigkeitsentwicklung des Spritzbetons. Die Versuchsergebnisse von Auslaugversuchen mit Mörtel-, Spritzmörtel- und Spritzbeton� proben im Rahmen dieser Arbeit belegen, dass das Versinterungspotential durch eine Reduzierung des Klinkergehalts im Bindemittel, den Einsatz von puzzolanischen oder latent� hydraulischen Zusatzstoffen und eine geringe Porosität reduziert wird. Die Änderungen der Bindemittelzusammensetzung des Spritzbetons haben Auswirkungen auf den Klinkergehalt, den Wasserbedarf und den Leimgehalt und damit auch auf die Verarbeitbarkeit der Frischbetonmischung. Für die Beurteilung der Verarbeitbarkeit, v. a. der Pumpbarkeit, von Frischbetonen und Frischbetonmischungen wurden Konsistenzprüfverfahren, rheologische Prüfverfahren und Prüfverfahren zur Beurteilung der Stabilität ausgewählt. Ihre Eignung und Aussagekraft wurde bei Pumpversuchen mit einer mobilen Spritzbetonmaschine verifiziert. Für die Pumpbarkeit von Frischbetonmischungen ist zum einen ein ausreichendes Leimvolumen zur Ausbildung einer Gleitschicht an der Rohrwandung erforderlich und zum anderen müssen die Mischungen unter Druck ausreichend stabil bleiben, damit während des Pumpens keine Blockaden in den Förderleitungen auftreten. Sofern diese Aspekte bei den entwickelten Rezepturen erfüllt sind, ist eine ausreichende Verarbeitbarkeit der Frischbetonmischungen erreicht. Darüber hinaus konnten die Anforderungen an die Frühfestigkeitsentwicklung und die 28 d Druckfestigkeit der Spritzbetone mit optimierten Mischungen erfüllt werden. Im Rahmen dieser Arbeit wurde gezeigt, welche Aspekte bei der Entwicklung von Spritzbetonen mit einem reduzierten Versinterungspotential berücksichtigt werden müssen, um auch die genannten baupraktischen Anforderungen zu erfüllen. N2 - In double-shell tunnel linings, the construction of ‚umbrella’ insulations helps preventing water ingress: depressurized ground water is led to drainage pipes, relieving the tunnel lining from water pressure. However, these solutions are associated in many cases with sintering (precipitation of carbonates) in the drainage system. Over time, the drainage pipes get clogged and the water cannot flow off. Subsequently, the water pressure increases and the tunnel may be damaged. The cleaning of the drainage pipes during operation of traffic tunnels is possible, but very costly and time consuming. To minimize the tunnel maintenance work, it is crucial to reduce such precipitations to a minimum. The parameters that influence the sintering process are (i) the chemical composition of the ground water, (ii) the environmental conditions, (iii) the design of the drainage system, (iv) and the contact of the water with cementitious materials, e.g. the sprayed concrete. In fact, the mix design of the sprayed concrete can be adapted to develop mixes with low sintering potential. To achieve this purpose special care has to be taken to avoid compromising the workability of the wet mix, the early strength development of the young sprayed concrete and the strength development of the hardened sprayed concrete. Results of leaching tests show that the calcium released from mortar, sprayed mortar and sprayed concrete samples can be reduced by lowering the clinker content of the binder, by adding supplementary cementitious materials, or by producing a dense matrix. Changes in the binder composition influence the clinker content in the binder, the water demand, the paste content, and thus the workability of the wet-mixes. The workability, and specifically the pumpability, of the wet-mixes was characterised using different test methods. The reliability of the selected test-methods was verified in pumping tests with a spraying machine. Results of lab tests and pumping tests show that the pumpability of wet-mixes requires, on the one hand, sufficient paste volume to form a lubricating layer on the pipe wall and, on the other hand, that the concrete remains stable even under pressure to avoid blockages in the conveying pipe. In addition to the requirements concerning the workability of the wet-mix, the requirements for early strength development and 28 day compressive strength of the sprayed concrete must be met. This work describes the various aspects that have to be taken into account when designing new mixes for sprayed concrete with low sintering potential, fulfilling at the same time the corresponding requirements for workability and hardened concrete properties. Y1 - 2019 UR - https://www.baustoffe.ruhr-uni-bochum.de/bs/mam/content/dissertation_maria_thumann.pdf CY - Regensburg ER - TY - GEN A1 - Grabinger, Lisa T1 - Data of a systematic literature research on eye tracking in software engineering [Data set] N2 - How did the data collection work? By systematic research in the IEEE Xplore and ACM digital libraries we extracted 125 papers. Further details on the procedure can be found in the journal paper. What data is provided? In this repository you can find the extracted data, i.e., file data.xlsx. Y1 - 2024 U6 - https://doi.org/10.5281/zenodo.11279180 N1 - Im Zusammenhang mit folgender Publikation: Grabinger, L., Hauser, F., Wolff, C. et al. On Eye Tracking in Software Engineering. SN COMPUT. SCI. 5, 729 (2024). https://doi.org/10.1007/s42979-024-03045-3 ER - TY - GEN A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Shamonin (Chamonine), Mikhail T1 - Transient Response of Macroscopic Deformation of Magnetoactive Elastomeric Cylinders in Uniform Magnetic Fields [Data set] Y1 - 2024 U6 - https://doi.org/10.5281/zenodo.10679499 N1 - This is the data set for all the figures in the paper with the title: "Transient Response of Macroscopic Deformation of Magnetoactive Elastomeric Cylinders in Uniform Magnetic Fields" published in the Polymers journal (doi:10.3390/polym16050586). ER - TY - GEN A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Shamonin (Chamonine), Mikhail A1 - Ruwisch, Kevin A1 - Wollschläger, Joachim T1 - Magnetoelectric Response of Laminated Cantilevers Comprising a Magnetoactive Elastomer and a Piezoelectric Polymer, in Pulsed Uniform Magnetic Fields [Data set] Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.14652152 N1 - This is the data set for all the figures in the paper with the title: "Magnetoelectric Response of Laminated Cantilevers Comprising a Magnetoactive Elastomer and a Piezoelectric Polymer, in Pulsed Uniform Magnetic Fields" published in the Sensors journal (doi:10.3390/s21196390). ER -