TY - CHAP A1 - Brückl, Oliver A1 - Haslbeck, Matthias A1 - Vogl, Bettina T1 - Interpretation von P-Q-Wolken als Hilfsmittel zur Bewertung von Mittelspannungsnetzen T2 - 4. OTTI Konferenz: Zukünftige Stromnetze 31.01- 01.02.2017, Berlin N2 - Zwischen Übertragungs-/Verteilungsnetzbetreibern bestehen Vereinbarungen in Form von Verträgen und Richtlinien (z.B. DCC), die das zulässige Wirk- und Blindleistungs-Verhalten (P-Q-Verhalten) beschreiben. Beim Blindleistungsverhalten werden i. d. R. zulässige cosφ-Bereiche definiert. Typische Werte sind hierfür cosφ ≤ 0,95 für den I. und II. Quadranten sowie cosφ ≤ 0,925 für den III. Quadranten. Der IV. Quadrant ist unzulässig. Netzstruktur, Verbraucher und Erzeuger beeinflussen das P-Q-Verhalten, weshalb die Einhaltung der cosφ-Grenzwerte bei sich ändernden Faktoren zu prüfen und ggf. Gegenmaßnahmen (z. B. Installation von Kompensationsdrosseln) zu ergreifen sind. Ziel dieser Veröffentlichung ist es, geeignete Parameter zu identifizieren und zu beschreiben, die einen Einfluss auf das P-Q-Verhalten und damit auf die Form der PQ- Wolke einer MS-Netzgruppe (MS-NG) aufweisen. Abbildung 1 zeigt eine beispielhafte P-Q-Wolke. Um die P-Q-Wolken verschiedener MS-Netze vergleichbar zu machen, wurden die P- und Q-Werte auf die jeweilige Bemessungsleistung der versorgenden Umspannwerktransformatoren (UWT) normiert (diese beträgt einheitlich 40 MVA). Die P-Q-Wolke besteht dabei aus allen ¼-h-Messwerten der Summenlast am UWT innerhalb eines Jahres. Als Linien angedeutet sind beispielhaft zulässige cosφ-Grenzen je Quadrant. KW - Blindleistung, P-Q-Wolke, Mittelspannungsnetz Y1 - 2017 ER - TY - CHAP A1 - Greiner, Sandra A1 - Schwägerl, Felix A1 - Westfechtel, Bernhard T1 - Realizing multi-variant model transformations on top of reused ATL specifications T2 - Proceedings of the 5th International Conference on Model-Driven Engineering and Software Development MODELSWARD, Porto, Portugal N2 - Model transformations are crucial in model-driven software engineering (MDSE). While combining MDSE and software product line engineering (SPLE) techniques, summarized as model-driven product line engineering (MDPLE), promises increased productivity by relying on organized reuse, the benefits are impeded by transformation specifications designed exclusively for single-variant models. Applying single-variant model transformations to multi-variant input models results in output models lacking the variability information. Multi-variant model transformations (MVMT), which preserve variability information, have only recently been understood as an explicit research problem. In this paper, we propose an a posteriori approach towards MVMT. Following the paradigm of organized reuse, we propose to employ single-variant model transformations without modifications in a first step, and to transfer variability information afterwards based on the artifacts provided by the single-variant transformation specification. In particular, we implemented this approach for the well-known model-to-model transformation language ATL. To deduce variability information, the execution artifacts (trace and execution model) are analyzed. Then, variability annotations are transfered to the target model automatically. The implementation is evaluated based on a practically example of a Graph product line. Results exhibit that our approach outperforms the conventional solution with respect to user effort, accuracy and performance. Y1 - 2017 U6 - https://doi.org/10.5220/0006137803620373 VL - 1 SP - 362 EP - 373 PB - SCITEPRESS - Science and Technology Publications ER - TY - BOOK A1 - Schultz, David A1 - Jain, Brijnesh T1 - Nonsmooth Analysis and Subgradient Methods for Averaging in Dynamic Time Warping Spaces N2 - Time series averaging in dynamic time warping (DTW) spaces has been successfully applied to improve pattern recognition systems. This article proposes and analyzes subgradient methods for the problem of finding a sample mean in DTW spaces. The class of subgradient methods generalizes existing sample mean algorithms such as DTW Barycenter Averaging (DBA). We show that DBA is a majorize-minimize algorithm that converges to necessary conditions of optimality after finitely many iterations. Empirical results show that for increasing sample sizes the proposed stochastic subgradient (SSG) algorithm is more stable and finds better solutions in shorter time than the DBA algorithm on average. Therefore, SSG is useful in online settings and for non-small sample sizes. The theoretical and empirical results open new paths for devising sample mean algorithms: nonsmooth optimization methods and modified variants of pairwise averaging methods. Y1 - 2017 U6 - https://doi.org/10.48550/arXiv.1701.06393 ER - TY - GEN A1 - Kellner, Florian T1 - Supplier portfolio optimization T2 - Ipsera Conference, April 2017, Balatonfüred/Budapest Y1 - 2017 ER - TY - GEN A1 - Kellner, Florian T1 - Visual decision support for the multi-objective supplier selection problem T2 - International Conference on Multiple Objective Programming and Goal Programming (MOPGP), 30-31 October 2017, Metz, France Y1 - 2017 ER - TY - GEN A1 - Kellner, Florian T1 - Multi-objective supplier portfolio configuration under supply risk and sustainability considerations T2 - International Conference on Operations Research (OR2017), September 2017, Berlin Y1 - 2017 ER - TY - CHAP A1 - Florian Kellner, A1 - Maximilian Lukesch, ED - Uwe-H. Pradel, ED - Wolfram Süssenguth, ED - Jochem Piontek, ED - Armin F. Schwolgin, T1 - Logistik nachhaltig gestalten: Die Bestimmung von CO2-Emissionen im Straßengütertransport T2 - Praxishandbuch Logistik: Erfolgreiche Logistik in Industrie, Handel und Dienstleistungsunternehmen N2 - Dieser Beitrag gibt eine prägnante Einführung in die Bestimmung von CO2-Emissionen im Straßengütertransport. KW - Grüne Logistik KW - Logistik KW - Treibhausgase Y1 - 2017 SN - 978-3-87156-340-9 PB - Dt. Wirtschaftsdienst CY - Köln ER - TY - JOUR A1 - Kellner, Florian A1 - Otto, Andreas A1 - Brabänder, Christian T1 - Bringing infrastructure into pricing in road freight transportation – A measuring concept based on navigation service data JF - Transportation Research Procedia N2 - Differences in road infrastructure, such as capacity, congestion, speed limits affect the productivity and the costs of short-distance freight operations. This article introduces a novel methodology that is based on navigation service data to measure the effects in terms of cost per kilometer using navigation and shipment data. The methodology is applied to five terminals of a forwarding cooperation and has been able to document significant differences in cost per kilometer across the terminals. The research results can be used by logistics service providers to better understand how productivity and thus profitability is affected by the quality of the transportation infrastructure in the particular areas they operate in. Furthermore, the insights will help these companies for better, i.e. cost-based pricing and will allow to document why and where prices need to be adapted. Y1 - 2017 U6 - https://doi.org/10.1016/j.trpro.2017.05.458 VL - 25 SP - 794 EP - 805 PB - Elsevier ER - TY - JOUR A1 - Igl, Johannes A1 - Kellner, Florian T1 - Exploring greenhouse gas reduction opportunities for retailers in Fast Moving Consumer Goods distribution networks JF - Transportation Research Part D: Transport and Environment N2 - This research explores logistics-related leverages in the responsibility of retailers for improving the environmental performance of a Fast Moving Consumer Goods (FMCG) distribution network. We examine opportunities for modifying the network carbon footprint by changing network design variables. To do so, a quantitative distribution network model is established, and 150 scenarios are calculated by modifying real-world shipment data from an existing multinational FMCG manufacturer. Four distribution variables are identified for a many-to-many and a hub-and-spoke network structure. Two variables affect the distribution network and two interfere in the shipment structure by manipulating weight and/or the delivery date. This research sheds light on the extent of the changes in greenhouse gas (GHG) emissions of the distribution network that result from modifications in the logistics variables. The greatest effect on the quantity of GHG emissions can be observed when an anticipation horizon for orders is introduced. When shipments are consolidated and delivered only weekly or biweekly from the manufacturer to the retailers, GHG emissions drop significantly. Another opportunity for retailers to cut down GHG emissions is based on the concept of minimum order quantities where shipments to a retailer location are bundled until a certain weight is reached. Additionally, total GHG emissions of distribution may be reduced by raising the tonnage limit, thereby triggering direct shipments between the manufacturer’s facilities and the retailer locations, or by raising the tonnage limit, which triggers direct shipments in the logistics service provider network. The extent of GHG reduction is assessed for all investigated variables. Y1 - 2017 U6 - https://doi.org/10.1016/j.trd.2016.10.008 VL - 50 SP - 55 EP - 69 PB - Elsevier ER - TY - CHAP A1 - Ortner, Martina ED - Kemal, Bozay ED - Borstel, Dierk T1 - Heimatliebe, Nationalstolz und Rassismus - Einzelmeinung oder Trend? BT - Extrem rechte politische Weltanschauungen von Migrant_innen (in München) T2 - Ungleichwertigkeitsideologien in der Einwanderungsgesellschaft N2 - Spricht hierzulande jemand von „Rechtsextremismus“ werden damit üblicherweise Einstellungsmuster und Verhaltensweisen von Deutschen assoziiert. Wenig Beachtung findet bislang, wie verbreitet entsprechende Einstellungen und Verhaltensweisen bei Migrant_innen sind und ob das Beobachtete mit der Zuschreibung „Rechtsextremismus“ treffend benannt ist. Die Fachinformationsstelle Rechtsextremismus in München (firm) wollte einen Beitrag zur Klärung liefern und führte von 2009 bis 2013 ein Projekt dazu durch. Y1 - 2017 SN - 978-3-658-14245-2 U6 - https://doi.org/10.1007/978-3-658-14245-2_15 SP - 235 EP - 259 PB - Springer ET - 1. Aufl. ER - TY - JOUR A1 - Liebetruth, Thomas T1 - Sustainability in Performance Measurement and Management Systems for Supply Chains JF - Procedia Engineering N2 - Aspects of sustainability – understood as the ability to manage economic, social and environmental performance at the same time – are becoming more important in Supply Chain Management. This is a challenge as sustainability adds less quantifiable aspects to Supply Chain Management than classic process aspects. On the other side measuring sustainability is crucial for the implementation of modern Supply Chains Management and to manage sustainably in the daily business. This contribution discusses the integration of sustainability in performance measurement and management systems (PMMS) for Supply Chain Management. Therefore in the paper firstly an overview of definitions and developments in performance measurement and management systems and a structure for PMMS are given. Secondly guidelines for good and modern PMMS are discussed. Thirdly existing approaches for Supply Chain Management PMMS (e. g. KPIs, TCO, value driver trees and balanced scorecards and maturity assessments) are presented and the suitability for Supply Chain Management as well as the possibility to integrate aspects of sustainability are examined. Lastly the fulfilment of the requirements and the ability to cope with the challenges of the approaches is discussed. Y1 - 2017 U6 - https://doi.org/10.1016/j.proeng.2017.06.093 SN - 1877-7058 VL - 192 SP - 539 EP - 544 PB - Elsevier ER - TY - CHAP A1 - Schwägerl, Felix A1 - Westfechtel, Bernhard T1 - Maintaining workspace consistency in filtered editing of dynamically evolving model-driven software product lines T2 - Proceedings of the 5th International Conference on Model-Driven Engineering and Software Development MODELSWARD - Volume 1, 15-28, 2017, Porto, Portugal N2 - Model-driven software product line engineering is complicated: In addition to defining a variability model, developers must deal with a multi-variant domain model. To reduce complexity, filtered editing, inspired by version control, was recently transferred to software product line engineering. On check-out, a single-variant model is derived based on a configuration of its features. On commit, the representatively applied change is scoped with the features to which it is relevant. The here considered dynamic editing model involves different kinds of evolution: The variability model and the domain model are edited concurrently. Features, which define the workspace contents or the scope of the change, may be introduced or deleted. Furthermore, the scope of a change may be revised until commit. The dynamism of this filtered editing model raises consistency problems concerning the evolving relationships between the variability model, the specified configuration, and the scope of the chan ge. This paper formalizes these constraints and presents consistency-preserving algorithms for the workspace operations check-out, commit, as well as a new operation, migrate. This way, the evolution of model-driven software product lines is managed automatically, non-disruptively, and consistently. Y1 - 2017 U6 - https://doi.org/10.5220/0006071800150028 SP - 15 EP - 28 PB - SCITEPRESS - Science and Technology Publications ER - TY - CHAP A1 - Schwägerl, Felix A1 - Westfechtel, Bernhard T1 - Perspectives on combining model-driven engineering, software product line engineering, and version control T2 - VaMoS '17: Proceedings of the 11th International Workshop on Variability Modelling of Software-Intensive Systems, February 1 - 3, 2017, Eindhoven, Netherlands N2 - Model-driven software engineering (MDSE), software product line engineering (SPLE), and version control (VC) have been established as three software engineering sub-disciplines dealing with raising the level of abstraction of software development, organizing variability in a systematic way, and controlling the evolution of software artifacts, respectively. Traditionally, these sub-disciplines are supported by disjoint tools, leading to undesirable context switches. In this tool-centric survey, approaches for combining MDSE, SPLE, and VC in a pair-wise or even holistic fashion are categorized and assessed. The combination of MDSE and SPLE is natural since models are used to describe both the problem and the solution space. Moreover, specific VC support for models may improve collaborative MDSE in a similar way as dedicated SPL versioning supports evolution control. Last, both VC and SPLE deal with different types of variability - in time and in space, respectively -, such that an integration promises to close the gap between historical and logical (model) versioning. Results indicate that these promises are only satisfied partly by existing approaches. To attest this, we conclude with a list of usage scenarios for combined MDSE/SPLE/VC that cannot be adequately addressed by the current tools. Y1 - 2017 SN - 978-1-4503-4811-9 U6 - https://doi.org/10.1145/3023956.3023969 SP - 76 EP - 83 PB - ACM CY - New York, NY, USA ER - TY - JOUR A1 - Lienland, Bernhard A1 - Zeng, Li A1 - Mayrock, Michael A1 - Kellner, Florian T1 - Operations Research im Controlling JF - Controlling : Zeitschrift für erfolgsorientierte Unternehmenssteuerung Y1 - 2017 U6 - https://doi.org/10.15358/0935-0381-2017-2-55 VL - 29 IS - 2 SP - 55 EP - 57 PB - C.H. Beck ; Vahlen ER - TY - JOUR A1 - Kellner, Florian A1 - Goerk, Anna Christina A1 - Lienland, Bernhard T1 - Mit CO2-Kennzahlen die Ökobilanz verbessern JF - Controlling & Management Review N2 - CO-Emissionen sind ein wichtiger Indikator für die Beurteilung der ökologischen Nachhaltigkeit von Unternehmen. In der Praxis sind sie jedoch schwierig zu bestimmen. Insbesondere für Logistik-und Transportaktivitäten, auf die ein Großteil der Emissionen entfällt, sind zuverlässige Methoden zur Ermittlung und Reduktion des Schadstoffausstoßes erforderlich. Y1 - 2017 U6 - https://doi.org/10.1007/s12176-017-0118-z VL - 61 IS - 9 SP - 58 EP - 64 PB - Springer ER - TY - JOUR A1 - Görtler, Michael T1 - Dem Rechtspopulismus begegnen. Drei bildungspraktische Thesen JF - forum erwachsenenbildung KW - Erwachsenenbildung KW - Populismus Y1 - 2017 UR - https://www.waxmann.com/index.php?eID=download&id_artikel=ART102163&uid=frei SN - 1433-769X VL - 50 IS - 2 SP - 43 EP - 44 PB - Waxmann ER - TY - CHAP A1 - Görtler, Michael ED - Görtler, Michael ED - Lotz, Mathias ED - Partetzke, Marc ED - Poma, Sara Poma ED - Winckler, Marie T1 - Herausforderungen einer kritischen politischen Bildung T2 - Kritische politische Bildung: Standpunkte und Perspektiven N2 - In der politischen Bildung wird die Debatte um eine kritische politische Bildung erneut geführt. Im Fokus der Debattenbeiträge stehen unterschiedliche Vorstellungen hinsichtlich Notwendigkeit, Begründung, Ziele, Inhalte und Methoden einer kritischen politischen Bildung im schulischen wie außerschulischen Bereich. Dieser Band zeigt unterschiedliche Standpunkte und Forschungsperspektiven auf, wie sie diesbezüglich auf der GPJE-Nachwuchstagung im Frühjahr 2016 an der Universität Bremen diskutiert worden sind. Der Band gliedert sich in drei Teile. Der erste umfasst theoretische wie konzeptionelle Beiträge. Im zweiten Teil steht die empirische Forschung im Mittelpunkt. Im dritten Teil werden schließlich die politisch-bildnerische Praxis und deren Reflexion thematisiert. Insgesamt werfen die Beiträge einen differenzierten Blick auf die Debatte um den Gehalt einer kritischen politischen Bildung. Dabei setzen sich die Autorinnen und Autoren mit Argumenten aus der aktuellen Diskussion auseinander und beleuchten blinde Flecken. KW - Diskurs KW - Perspektive KW - Politische Bildung KW - Standort Y1 - 2017 SN - 978-3-7344-0420-7 SP - 123 EP - 135 PB - Wochenschau Verl. CY - Schwalbach/Ts. ER - TY - JOUR A1 - Schildbach, Ina T1 - Was ist der ‚angemessene’ Armutsbegriff? Eine sozialethische Kritik der Debatte JF - Sozialmagazin N2 - Nach dem Erscheinen des "5. Armuts- und Reichtumsbericht" der Bundesregierung im April 2017 stellt sich erneut die häufig debattierte Frage nach der "angemessenen" Definition von Armut. Darüber lässt sich trefflich streiten. Sie geht jedoch am Kern des Themas vorbei: Mit der Fokussierung auf das vermeintlich richtige Messen geht eine Verwandlung des Armutsbegriffes einher, die die eigentlichen Fragen ausblendet. Y1 - 2017 UR - https://content-select.com/de/portal/media/view/5936970e-43c8-4bc7-b216-1502b0dd2d03 SN - 0340-8469 VL - 42 IS - 5-6 SP - 50 EP - 55 PB - Beltz Juventa ER - TY - CHAP A1 - Schreyer, Marcus A1 - Wedding, Tim ED - Przybylo, Jakob T1 - Unternehmensgruppe Max Bögl T2 - BIM in der Anwendung: Beispiele und Referenzen KW - Building Information Modeling Y1 - 2017 SN - 978-3-410-26815-4 SP - 109 EP - 119 PB - Beuth CY - Berlin ER - TY - BOOK A1 - Richter, Stefanie A1 - Rose, Nicole T1 - Entwicklung und Umsetzung quartiersbezogener Wohnprojekte für ein selbstbestimmtes Leben im Alter. Praxisleitfaden für Kleinstädte und Gemeinden in strukturschwachen ländlichen Räumen N2 - Der demografische Wandel in Deutschland wird die Wohnstruktur entscheidend verändern. Für die vielfach alleine lebenden älteren Paare und Singles werden alternative Wohnformen notwendig, um ein möglichst langes eigenständiges Leben zu ermöglichen. Dabei liegen gerade im ländlichen Raum oftmals spezielle Eigenarten vor: Im Durchschnitt ist das vorhandene Einkommen geringer und zum anderen wohnen überdurchschnittlich viele in Einfamilienhäusern zum Eigentum. Der Aufwand für die Pflege der Immobilie wird aber im Alter oftmals zu aufwändig, so dass vermehrt kostengünstige Wohnformen angeboten werden müssen, die für diese Gruppe interessant und gleichzeitig bezahlbar sind. In diesem Projekt wurde aufbauend auf vorhandenen Untersuchungen ein Leitfaden erstellt, um zukünftig den Bau von nachhaltigen Wohn- und Quartiersmodellen im ländlichen Raum zu unterstützen. KW - Altengerechtes Wohnen KW - Deutschland KW - Ländlicher Raum KW - Projekt KW - Stadtviertel KW - Strukturschwaches Gebiet KW - Wohnform Y1 - 2017 SN - 978-3-7388-0014-2 PB - Fraunhofer IRB-Verlag CY - Stuttgart ER - TY - JOUR A1 - Görtler, Michael T1 - Schwierige Übergänge: Überlegungen zum Studium der Sozialen Arbeit und zum Berufseinstieg als Sozialarbeiter JF - Forum für Kinder- und Jugendarbeit Y1 - 2017 UR - https://www.kinder-undjugendarbeit.de/fileadmin/user_upload/FORUM_2017/Teil_1_Forum_4_2017.pdf SN - 1434-4696 IS - 4 SP - 9 EP - 12 PB - Verband Kinder- und Jugendarbeit CY - Hamburg ER - TY - JOUR A1 - Liebetruth, Thomas T1 - Instrumente des Supply Chain Controllings JF - Materialwirtschaft und Logistik – auf einen Blick Y1 - 2017 IS - 9 PB - WEKA CY - Kissing ER - TY - JOUR A1 - Rösl, Gerhard A1 - Seitz, Franz T1 - Doing away with cash? The welfare costs of abolishing cash JF - IMFS Working Papers Y1 - 2017 UR - http://www.imfs-frankfurt.de/fileadmin/user_upload/IMFS_WP_112.pdf IS - 112 PB - Institute for Monetary and Financial Stability ER - TY - JOUR A1 - Süzeroğlu-Melchiors, Sevim T1 - The supply side of IP management: Understanding firms’ choices regarding IP intermediaries JF - World Patent Information N2 - Studies focusing on the supply side of IP management, particularly on the outsourcing of patent related work, are relatively rare. This paper aims to contribute to the IP literature in two ways. First, a definition of the IP service provider is proposed. Second, I consider three main hypotheses that determine a firm's preference for outsourced IP work. Using data on the outsourcing of patent renewal payments, I found evidence that the choice of IP supplier is affected by: (1) the firm's own IP maintenance capabilities, (2) the firm's IP knowledge utilization, and (3) the IP complexity. KW - Intellectual property (IP) management KW - IP intermediaries KW - IP suppliers KW - Patents Y1 - 2017 U6 - https://doi.org/10.1016/j.wpi.2017.08.002 SN - 0172-2190 VL - 50 SP - 55 EP - 63 PB - Elsevier ER - TY - JOUR A1 - Süzeroglu-Melchiors, Sevim A1 - Gassmann, Oliver A1 - Palmié, Maximilian T1 - Friend or foe? The effects of patent attorney use on filing strategy vis-a-vis the effects of firm experience JF - Management Decision N2 - PurposeIn the intellectual property (IP) and management literature, the question of how external patent attorneys impact patent filings has been understudied. The purpose of this paper is to advance this area of research by examining how the use of external patent attorneys influences the patent filing strategies of firms and what impact firms? level of experience with the exclusive use of in-house resources has on filing strategies. This study, thus, provides insights into the strategic dimension behind patent filing, a process which is affected by patent attorneys? work and decision-making processes.Design/methodology/approachThe econometric analysis is based on a patent database of 922,553 patents which is combined with an EPO patent database covering applications from 1990 to 2010. The authors test the hypotheses for this study using patent indicators addressing the impact of in-house firm experience vs the use of external patent attorneys on firm?s filing strategy.FindingsThis research finds empirical evidence that external patent attorneys? work has an effect on patent scope, international scope, and patenting speed. Moreover, it can be shown that external patent attorneys have a positive impact on most filing dimensions, such as patent scope, international scope and the Patent Cooperation Treaty option, whereas the level of in-house firm experience has a negative impact on most filing dimensions. This implies that external patent attorneys seem to pursue a ?maximization approach? while experienced firms seem to pursue a more differentiated approach to filing patents, for instance, drafting narrower and more focused patents.Practical implicationsThe study suggests that effective filing strategies require an integrated approach between diverse IP stakeholders. More particularly, filing strategies should be communicated and aligned between all actors, including external patent attorneys in order to achieve the targeted patenting output.Originality/valueThe current study develops a patent filing typology, which accounts for patent attorneys? decision options. In providing insights into patent attorneys? work and their impacts on intellectual property rights management, the study is a useful complement to prior research, which has predominantly focused on applicants or examiners. KW - Patents KW - Filing strategy KW - Intellectual property management KW - IP Intermediaries KW - Patent attorney KW - Patent strategies KW - Strategic IP mnanagement Y1 - 2017 U6 - https://doi.org/10.1108/MD-01-2016-0047 SN - 0025-1747 VL - 55 IS - 6 SP - 1122 EP - 1142 PB - Emerald ER - TY - JOUR A1 - Coté-Berubé, E. A1 - Süzeroglu-Melchiors, Sevim T1 - Between now and 2030: New paths to IP protection JF - Mitteilungen der deutschen Patentanwälte, Notices of the German Patent Attorneys Y1 - 2017 VL - 10 SP - 447 EP - 451 PB - Heymanns ER - TY - CHAP A1 - Borg, Leise A1 - Jørgensen, Jakob Sauer A1 - Frikel, Jürgen A1 - Quinto, Eric Todd A1 - Sporring, Jon T1 - Reducing artifacts from varying projection truncations T2 - 3rd International Conference on Tomography of Materials and Structures, Lund, Sweden, 26-30 June 2017, ICTMS2017-65-1 N2 - We study samples with full and partial occlusion causing streak artifacts, and propose two mod-ifications of filtered backprojection for artifact removal. Data is obtained by the SPring-8 synchrotron using a monochromatic parallel-beam scan [1]. Thresholding in the sinogram segments the metal, resulting in edges on which we apply 1) a smooth transition, or 2) a Dirichlet boundary condition. KW - X-ray tomography KW - projection truncation KW - streak artifacts KW - boundary conditions Y1 - 2017 UR - https://meetingorganizer.copernicus.org/ICTMS2017/ICTMS2017-65-1.pdf ER - TY - CHAP A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Analysis of the correlation behavior between local available information to the overall reactive power of a medium-voltage grid group T2 - Applied Research Conference - ARC 2017, 7 July 2017 München N2 - The initiated energy transition leads to extensive changes in the supply of energy. The increasing use of renewable energy causes a shift of the produced power from centralized conventional power plants to decentralized energy plants. Because of this redistribution and the related change of load-flows, new challenges and problems for distribution system operators appear. This includes the integration of new loads and plants into the existing power grid and the guarantee of a high supply security and quality. It also includes strengthened requirements for the use and provision of reactive power. The project “SyNErgie” (“Systemoptimierendes Netz- und Energiemanagement für Verteilungsnetze der Zukunft“) deals with the development of a new reactive power management, which gets embedded in grid planning and controlling processes. One focus of the project is on the integration of decentralized energy plants (DEPs) to the reactive power management. The aim is to develop a decentralized and self-sufficient reactive power control system, which only works with local available information (measures). Therefore is no necessity of a complex communication system to the grid control center. Self-controlled Q-controller in the DEPs get characteristic curves and control the reactive power sources with local measurements (e.g. current, voltage, effective power). This new reactive power control management aims for the reactive power compensation in order to increase the integration capacity of loads and plants in a grid [2]. In order to generate characteristic curves for DEPs, it is necessary to analyze the correlation behavior between the local available measurements at the DEPs and the overall-Q-behavior of the grid group at the transformer. In that regard, influencing quantities should be considered. The aim is to involve und evaluate all relevant influencing quantities in order to determine energy plants and certain operating points, in which the correlation behavior and the prediction for the overall-Q-behavior are sufficient. The next step is to develop a model that fits these correlation behaviors and generate characteristic curves. One method to generate characteristic curves for the Q-controllers is regression analysis. The developed Q-control-system with the characteristic curves will be tested, evaluated and optimized in a following field test in cooperation with distribution system operators. KW - Mittelspannungsnetz KW - Blindleistungsmanagement KW - Blindleistung KW - Integration Erneuerbare Energien KW - Potentialerschließung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58712 SP - 224 EP - 230 CY - München ER - TY - JOUR A1 - Heese, Carl A1 - Miklitza, Norbert T1 - Entwicklung und Pflege des Leitbilds JF - Führen und Wirtschaften im Krankenhaus KW - Krankenhausmanagement Y1 - 2017 VL - 11 SP - 1048 EP - 1050 PB - Bibliomed, Med. Verl.-Ges. CY - Melsungen ER - TY - JOUR A1 - Heese, Carl A1 - Thaler, Philipp T1 - Traditionelles Taekwondo - auch für Menschen mit Behinderung: Interviewstudie zu einem inklusiven Modellprojekt JF - Theorie und Praxis der Sozialen Arbeit KW - Behindertenhilfe Y1 - 2017 UR - https://content-select.com/de/portal/media/view/59537092-aaf8-4451-9084-76bbb0dd2d03 SN - 0342-2275 VL - 68 IS - 3 SP - 185 EP - 194 PB - Beltz Juventa CY - Weinheim ER - TY - CHAP A1 - Heese, Carl A1 - Thaler, Tilman A1 - Thaler, Philipp T1 - Der PARO in der neurologischen Frührehabilitation. T2 - Neurologie & Rehabilitation KW - Neurorehabiltation Y1 - 2017 SN - 1869-7003 VL - Bd. 23 IS - Suppl. 1 SP - 37 PB - Hippocampus CY - Bad Honnef ER - TY - RPRT A1 - Steffens, Oliver A1 - Rechenauer, Christian A1 - Neuleitner, Nikolaus A1 - Seidl, Erwin A1 - Kemper, Peter A1 - Nigl, Bernhard A1 - Rozankovic, Andreas A1 - Laumer, Johann A1 - Stierstorfer, Johannes A1 - Gerstner, Julian A1 - Zacher, Markus A1 - Zimmermann, Patrick A1 - Primbs, Sebastian A1 - Schäfer, Sebastian A1 - Schmidbauer, Florian A1 - Tretter, Simon T1 - Effizienzhaus Plus Deggendorf‐Natternberg: Modellvorhaben im Netzwerk „Effizienzhaus Plus“ der Forschungsinitiative Zukunft Bau gefördert vom Bundesinstitut für Bau‐, Stadt‐ und Raumforschung (BBSR), Endbericht 2017 N2 - Dokumentation, Vorbereitungen und Ergebnisse der zweijährigen Messperiode vom 01.11.2014 bis 31.10.2016 Ausgehend von Konzeption und Planungsdaten für das Effizienzhaus Plus der Firma Karl Bachl GmbH & Co. KG in Deggendorf‐Natternberg berichten wir über die Ergebnisse des energetischen Monitorings über den Zeitraum von zwei Messjahren vom 01.11.2014 bis 31.10.2016. Die OTH Regensburg wurde mit der wissenschaftlichen Begleitforschung dieses Modellprojekts im Rahmen des Zukunft‐Bau‐Netzwerks Effizienzhaus Plus1 beauftragt. Das Gebäude wird vorwiegend solarthermisch beheizt, ergänzt durch eine elektrische Nachheizung. Neben Solarkollektoren befinden sich auch PV‐Module auf dem Dach, deren Erträge den Jahresstrombedarf bilan‐ ziell decken. Durch Einsatz eines Batteriespeichers kann der Anteil des selbst genutzten PV‐Stroms erhöht werden. Die Gesamtbilanz des ersten Jahres zeigt, dass das Gebäude primär‐ und endenergetisch die Anforderungen an den Effizienzhaus Plus Standard erfüllt. Wir stellen die Energieflüsse, Gewinne und Verbräuche, sowie die Wirkungsgrade, den solaren und elektrischen Deckungsgrad und den Autarkiegrad des Gebäudes im Detail vor und diskutieren den Einfluss des elektrischen Batteriespeichers sowie der thermischen Verluste aus dem Pufferspeicher. Verbesserungspotentiale werden in der Beseitigung von haustechnischen Fehlfunktionen und in einer stärkeren Dämmung des Pufferspeichers gesehen. Dieser ist zudem für den beabsichtigten Zweck nach den Erkenntnissen aus den empirischen Messungen zu groß dimensioniert, wodurch sich für künftige Projekte ein Einsparungspotential ergibt. KW - Effizienzhaus Plus KW - Energieeffizienz KW - Nachhaltiges Bauen KW - Neubau KW - Sonnenhaus Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58404 PB - OTH Regensburg CY - Regensburg ER - TY - GEN A1 - Mauerer, Wolfgang A1 - Ramsauer, Ralf A1 - Kölbl, Andreas T1 - The Many Approaches to Real-Time and Safety-Critical Linux T2 - Open Source Summit Japan 2017 Y1 - 2017 UR - http://events17.linuxfoundation.org/sites/events/files/slides/talk_10.pdf ER - TY - JOUR A1 - Schliermann, Rainer A1 - Heydenreich, Patrick A1 - Bungter, Tanja A1 - Anneken, Volker T1 - Health-related quality of life in working-age adults with visual impairments in Germany JF - Disability & Rehabilitation N2 - Purpose The purpose of this study was to gather data about physical activity and quality of life (QoL) for people of working age with visual impairments to optimize upcoming physical activity-based interventions in vocational rehabilitation. Methods Two hundred and seventy-seven former participants of four vocational rehabilitation centres in Germany answered an online questionnaire. The health-related QOL has been assessed by means of the WHOQOL-BREF questionnaire. The data were analysed via multivariate analysis of covariances (MANCOVAs), univariate analysis of covariances (ANCOVAs) and discriminant function analysis. Results Compared to a normative group of adults aged 36-45, the study group showed lower values in all domains of QOL. The MANCOVA (visual acuity) produced no multivariate significant effect. Also, the ANCOVA showed no significant effect for the global dimension of the WHOQOL-BREF. The MANCOVA (leisure time activity) produced a multivariate significant effect. Post-hoc ANCOVAS revealed significant effects for all four domains of QoL. The ANCOVA analysing the global domain showed a similar significant effect as well. The active persons had higher values in all domains of QoL compared to the more passive participants. Conclusion Interventions in vocational rehabilitation should focus on leisure time activity to enhance QoL. At this stage, the role of physical activity is still unclear and further studies are needed. Implications for rehabilitation People with visual impairments often show a worse quality of life than normal-sighted people. The degree of severity of the visual impairment does not affect quality of life. Sport and physical activity are effective means of improving quality of life. An active leisure time activity supports the improvement of the quality of life of visual-impaired people that participated in a vocational rehabilitation. KW - Employment status KW - Germany KW - ICF KW - job satisfaction KW - leisure activity KW - physical activity KW - vocational rehabilitation Y1 - 2017 U6 - https://doi.org/10.3109/09638288.2016.1146353 SN - 0963-8288 VL - 39 IS - 5 SP - 428 EP - 437 PB - Taylor & Francis CY - Abingdon ER - TY - JOUR A1 - Knödler, Christoph T1 - Rezension für Beyer, Thomas, Recht für die Soziale Arbeit BT - Studienkurs Soziale Arbeit. Lehrbuchreihe für Studierende der Sozialen Arbeit an Fachhochschulen und Universitäten, Band 5, 1. Aufl., Nomos Verlagsgesellschaft 2017 JF - TUP Theorie und Praxis der Sozialen Arbeit Y1 - 2017 UR - https://content-select.com/de/portal/media/view/5a287ccd-3a60-4154-9193-1977b0dd2d03 SN - 0342-2275 VL - 68 IS - 4 SP - 310 EP - 312 PB - Beltz Juventa CY - Weinheim ER - TY - INPR A1 - Borg, Leise A1 - Frikel, Jürgen A1 - Jørgensen, Jakob Sauer A1 - Quinto, Eric Todd T1 - Theorems that Characterize Artifacts for Arbitrary Limited X-ray CT Data N2 - This article provides a mathematical classification of artifacts from arbitrary incom-plete X-ray tomography data when using the classical filtered backprojection algorithm. Usingmicrolocal analysis, we prove that all artifacts arise from points at the boundary of the data set.Our results show that, depending on the geometry of the data set boundary, two types of artifactscan arise: object-dependent and object-independent artifacts. The object-dependent artifacts aregenerated by singularities of the object being scanned and these artifacts can extend all along lines.This is a generalization of the streak artifacts observed in limited angle CT. The article also char-acterizes two new phenomena: the object-independent artifacts are caused only by the geometryof the data set boundary; they occur along lines if the boundary of the data set is not smooth andalong curves if the boundary of the data set is smooth. In addition to the geometric descriptionof artifacts, the article also provides characterizations of their strength in Sobolev scale in certaincases. Moreover, numerical reconstructions from simulated and real data are presented illustratingour theorems.This work is motivated by a reconstruction we present from a synchrotron data set in whichartifacts along lines appeared that were independent of the object.The results of this article apply to a wide range of well-known incomplete data problems, in-cluding limited angle CT and region of interest tomography, as well as to unconventional x-ray CTimaging setups. Some of those problems are explicitly addressed in this article, theoretically and numerically. Y1 - 2017 UR - https://www.researchgate.net/publication/318360078_Theorems_that_Characterize_Artifacts_for_Arbitrary_Limited_X-ray_CT_Data ET - version 6 ER - TY - JOUR A1 - Goldhacker, Markus A1 - Keck, P. A1 - Igel, A. A1 - Lang, Elmar Wolfgang A1 - Tomé, Ana Maria T1 - A multi-variate blind source separation algorithm JF - Computer Methods and Programs in Biomedicine N2 - Background and objective The study follows the proposal of decomposing a given data matrix into a product of independent spatial and temporal component matrices. A multi-variate decomposition approach is presented, based on an approximate diagonalization of a set of matrices computed using a latent space representation. Methods The proposed methodology follows an algebraic approach, which is common to space, temporal or spatiotemporal blind source separation algorithms. More specifically, the algebraic approach relies on singular value decomposition techniques, which avoids computationally costly and numerically instable matrix inversion. The method is equally applicable to correlation matrices determined from second order correlations or by considering fourth order correlations. Results The resulting algorithms are applied to fMRI data sets either to extract the underlying fMRI components or to extract connectivity maps from resting state fMRI data collected for a dynamic functional connectivity analysis. Intriguingly, our algorithm shows increased spatial specificity compared to common approaches, while temporal precision stays similar. Conclusion The study presents a novel spatiotemporal blind source separation algorithm, which is both robust and avoids parameters that are difficult to fine tune. Applied on experimental data sets, the new method yields highly confined and focused areas with least spatial extent in the retinotopy case, and similar results in the dynamic functional connectivity analyses compared to other blind source separation algorithms. Therefore, we conclude that our novel algorithm is highly competitive and yields results, which are superior or at least similar to existing approaches. KW - Blind source separation KW - Independent component analysis KW - fMRI KW - Resting state KW - Retinotopy KW - Spatio temporal Y1 - 2017 U6 - https://doi.org/10.1016/j.cmpb.2017.08.019 SN - 1872-7565 SN - 0169-2607 VL - 151 SP - 91 EP - 99 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Schildgen, Johannes A1 - Krück, Yannick A1 - Deßloch, Stefan ED - Mitschang, Bernhard ED - Nicklas, Daniela ED - Leymann, Frank ED - Schöning, Harald ED - Herschel, Melanie ED - Teubner, Jens ED - Härder, Theo ED - Kopp, Oliver ED - Wieland, Matthias T1 - Transformations on Graph Databases for Polyglot Persistence with NotaQL T2 - Datenbanksysteme für Business, Technologie und Web, 17. Fachtagung des GI-Fachbereichs "Datenbanken und Informationssyteme" (DBIS) : 06.-10.03.2017 in Stuttgart, Deutschland (BTW 2017) Y1 - 2017 IS - CD-ROM SP - 83 EP - 102 PB - Gesellschaft für Informatik, Bonn ER - TY - BOOK A1 - Lieb, Christian A1 - Klenk, Eva Marianne A1 - Galka, Stefan A1 - Keuntje, Christopher T1 - Einsatz von Routenzugsystemen zur Produktionsversorgung : Studie zu Planung Steuerung und Betrieb KW - Effizienz KW - Produktion KW - Routenzug Y1 - 2017 SN - 978-3-941702-79-0 PB - fml - Lehrstuhl für Fördertechnik Materialfluß Logistik Technische Universität München CY - Garching b. München ER - TY - JOUR A1 - Richter, Stefanie A1 - Hill, Burkhard T1 - Die biografische Bedeutung von Kultureller Bildung. Potentiale von Biografieforschung zum Verständnis von kulturellen Bildungsprozessen JF - KULTURELLE BILDUNG ONLINE Y1 - 2017 UR - https://www.kubi-online.de/artikel/biografische-bedeutung-kultureller-bildung-potentiale-biografieforschung-zum-verstaendnis U6 - https://doi.org/10.25529/92552.273 ER - TY - JOUR A1 - Boßmann, T. A1 - Voigt-Radloff, S., Braun, C., A1 - Lauer, Norina A1 - Marotzki, Ulrike T1 - Praxisbasierte Forschungsnetzwerke: Expertinneninterviews zur Umsetzung in der Physiotherapie, Ergotherapie und Logopädie JF - L.O.G.O.S. Interdisziplinair T2 - Practice-based research networks: Expert interviews on the implementation in physiotherapy, occupational therapy and speech therapy Y1 - 2017 SN - 0944-405X VL - 25 IS - 3 SP - 194 EP - 201 PB - ProLog, Therapie- und Lernmittel OHG CY - Köln ER - TY - JOUR A1 - Briem, Ulrich T1 - The mean stress influence of rope wires stressed by tension JF - UTF-science : das Forschungsmagazin für die Produktionstechnik - Whitepaper N2 - In tension-tension tests the amplitude stress as well as the mean stress can be adjusted to any desired level. For a common evaluation of all tension-tension tests amplitude and mean stresses should be substituted by an equivalent amplitude stress. For determination of these e quivalent stress the so called mean stress influence hast to be known. In the following, suitable models will be presented which allow a common evaluation of all tension-tension tests and also a general description of rope wire fatigue behavior. KW - Ermüdungsverhalten KW - Materialermüdung KW - Umlaufbiegedauerversuch KW - Wöhler-Kurve KW - Ziehversuch KW - Zugschwelldauerversuch Y1 - 2017 UR - https://umformtechnik.net/content/location/74182 SP - 1 EP - 10 PB - Meisenbach CY - Bamberg ER - TY - JOUR A1 - Rösl, Gerhard A1 - Tödter, Karl-Heinz T1 - The Financial Repression Policy of the European Central Bank: Interest Income and Welfare Losses for German Savers JF - Ifo DICE report KW - CENTRAL banking industry KW - ECONOMIC mobility KW - EUROPEAN Central Bank KW - EUROPEAN Union countries KW - GOVERNMENT revenue KW - INCOME distribution KW - INCOME reconstruction Y1 - 2017 UR - https://www.ifo.de/DocDL/dice-report-2017-1-onlineversion-march.pdf VL - 15 IS - 1 SP - 5 EP - 8 PB - München CY - Ifo-Institut für Wirtschaftsforschung ER - TY - JOUR A1 - Briem, Ulrich T1 - Verhalten von Drahtseilen und Seildrähten bei Tieftemperatur JF - Draht N2 - Mobilkrane arbeiten regelmäßig in Regionen, in denen Temperaturen bis -60 °C herrschen. In sicherheitstechnisch bedeutsamen Anwendungen wird der Kranbetrieb eingestellt, und zwar nur, weil in den entsprechenden Regelwerken die niedrigste genannte Arbeitstemperatur -40 °C ist. Aber ist dies technisch zwingend? Es wird über Versuche mit Seilen und Seildrähten berichtet, die sowohl bis -95 °C als auch bei Raumtemperatur durchgeführt wurden. Sowohl das Ermüdungsverhalten der Seildrähte als auch die Bruchkraft der Seile sind bei Temperaturen von -60 °C besser als bei Raumtemperatur. Dagegen wird das Ermüdungsverhalten der Seile schlechter. Dies ist aber hauptsächlich verursacht durch das Verhalten des verwendeten Konservierungsstoffs. Im Betrieb sind die Seile zusätzlich mit Endverbindungen versehen. Diese Komponenten müssen ebenfalls solchen tiefen Temperaturen widerstehen. Untersuchungen, ob Seilendverbindungen bei Tieftemperatur geeignet sind, waren allerdings nicht Gegenstand dieses Berichts. Daher ist es ratsam, beim Betrieb bei Tieftemperatur die Intervalle der Seilinspektion zu verkürzen. Konservierungsstoffe können ihre Wirkung verlieren und zu beschleunigter Seilermüdung führen - zum Beispiel bei Auslegerverstellseilen von Mobilkranen - und das Zusammenwirken von Seilen und ihren Endverbindungen bei tiefen Temperaturen ist nicht ausreichend erforscht und dokumentiert. Insgesamt können Seile bei Temperaturen von -60 °C sicher betrieben werden, wenn sowohl die Seile als auch ihre Endverbindungen regelmäßig inspiziert werden. KW - Arbeitstemperatur KW - Betriebstemperatur KW - Drahtseil KW - Ermüdungsverhalten KW - Konservierungsstoff KW - Mobilkran KW - Raumtemperatur KW - Tieftemperatur KW - Tieftemperaturverhalten Y1 - 2017 VL - 68 IS - 5 SP - 16 EP - 18 PB - Meisenbach CY - Bamberg ER - TY - CHAP A1 - Blahníková, Barbora A1 - Müller, D. A1 - Waas, M. A1 - Lechner, Alfred T1 - Multilyzer - Mikrofluidisches Echtzeitmesssystem für die Analyse umweltrelevanter Substanzen T2 - 7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, München N2 - Die übermäßige Verwendung von stickstoffbasierten Düngemitteln in der Landwirtschaft stellt eine Gefährdung für die Umwelt und Lebewesen dar. So ist die Analyse von Boden- und Grundwasser zu einem wesentlichen Bestandteil der Nachhaltigkeit und der ökologischen Erhaltung geworden. Dafür bietet der Multilyzer eine passende Lösung. Der Multilyzer ist ein mikrofluidisches Analysesystem zur Bestimmung niedrigster Konzentrationen von Nitrat, Nitrit und Ammonium, die alle wesentliche Bestandteile des Stickstoffkreislaufs sind. Welche bei Übermäßiger Aufnahme im Körper krebserregend wirken und den Sauerstofftransport im Blutkreislauf stören. Der Aufbau ist eine Kombination aus Absorptions- und Fluoreszenzspektroskopie. Der Betrieb mit einer 12 Volt Batterie ermöglicht die Verwendung des Multilyzer-Systems zur Online-Messung im Feld. Somit können sehr kurze Analysezeiten realisiert und der Einfluss von Umwandlungs- bzw. Abbauprozessen vermieden werden. Das gesamte Messsystem wird im Kompetenzzentrum Nanochem an der OTH Regensburg entwickelt, inklusive Fertigungstechnologien, Software- und Hardwaresteuerung. N2 - Excessive use of nitrogen based fertilizers in agriculture represents an environmental hazard. Thus, analysis of soil water and groundwater has become an essential part of sustainability and ecological preservation. On this account, the Multilyzer provides a suitable solution. The Multilyzer is a microfluidic measuring system for the determination of lowest concentrations of nitrate, nitrite and ammonium, which are essential components of the nitrogen cycle. The measurement combines the principles of absorption and fluorescence spectroscopy. As a transportable unit, online measurements can be carried out using a 12 Volts battery power supply. Consequently, the influence of conversion and degradation processes can be avoided. The complete device is developed at the Centre of Excellence Nanochem at OTH Regensburg including fabrication technologies, software and hardware control. T2 - Multilyzer - Microfluidic Online Measuring System for the Analysis of Environmentally Relevant Substances KW - Absorptionsspektroskopie KW - Ammonium KW - Analysensystem KW - Blutkreislauf KW - Bodenwasser KW - Düngemittel KW - Echtzeitsystem KW - Fluoreszenzspektroskopie KW - Messgerät KW - Messsystem KW - Mikrofluidik KW - Nachhaltigkeit KW - Nitrat KW - Nitrit KW - Online-Messung KW - Programmsteuerung KW - Stickstoff Y1 - 2017 SN - 978-3-8007-4491-6 SP - 382 EP - 385 PB - VDE-Verlag CY - München ER - TY - BOOK A1 - Obergrießer, Mathias T1 - Digitale Werkzeuge zur integrierten Infrastrukturbauwerksplanung: Am Beispiel des Schienen- und Straßenbaus N2 - Der Autor entwickelt neue digitale Werkzeuge und Methoden, die eine durchgängige und integrierte Planung einer Infrastrukturmaßnahme anhand eines föderierten Modells ermöglichen. Dabei werden verschiedene Lösungsansätze vorgestellt, die eine Erweiterung der traditionellen Planungsprozesse vorsehen. Mathias Obergrießer fasst diese Methoden und digitalen Werkzeuge zu einem leistungsfähigen Modellierungsleitfaden zusammen, der eine effektive Planung des parametrisch-assoziativen Infrastrukturinformationsmodells erlaubt. Die erfolgreiche Validierung des Leitfadens erfolgt anhand verschiedener Anwendungsbeispiele aus der Praxis. Der Inhalt Einführung eines modellgestützten Planungsprozesses im Infrastrukturbau Beschreibung geometrischer und parametrisch-assoziativer Modellierungsansätze Definition eines infrastruktur-spezifischen Modellierungsleitfadens Konzepte zur Umsetzung des parametrisch-assoziativen Infrastrukturinformationsmodells Die Zielgruppen Dozierende und Studierende des Bauingenieurwesens Praktiker und Praktikerinnen in Ingenieurbüros Der Autor Mathias Obergrießer ist seit 2008 an der Hochschule Regensburg als Lehrbeauftragter tätig. Seine Forschungsschwerpunkte liegen im Bereich der parametrisch-assoziativen 3D-Infrastrukturinformationsmodellierung sowie in der Integration von geotechnischen Planungsprozessen. Seit 2014 ist er hauptverantwortlicher Tragwerksplaner für Infrastrukturbauwerke im einem deutschen Ingenieurbüro. Y1 - 2017 SN - 978-3-658-16782-0 U6 - https://doi.org/10.1007/978-3-658-16782-0 N1 - Dissertation Technische Universität München, 2016: Mathias Obergrießer: „Entwicklung von digitalen Werkzeugen und Methoden zur integrierten Planung von Infrastrukturbauwerken am Beispiel des Schienen- und Straßenbaus.“ PB - Springer Fachmedien CY - Wiesbaden ER - TY - CHAP A1 - Pereira, Clayton R. A1 - Passos, Leandro A. A1 - Lopes, Ricardo R. A1 - Weber, Silke A. T. A1 - Hook, Christian A1 - Papa, Joao Paulo T1 - Parkinson’s Disease Identification Using Restricted Boltzmann Machines T2 - Computer Analysis of Images and Patterns, 17th International Conference, CAIP 2017, Ystad, Sweden, August 22-24, 2017, Proceedings, Part II N2 - Currently, Parkinson’s Disease (PD) has no cure or accurate diagnosis, reaching approximately 60, 000 new cases yearly and worldwide, being more often in the elderly population. Its main symptoms can not be easily uncorrelated with other illness, being way more difficult to be identified at the early stages. As such, computer-aided tools have been recently used to assist in this task, but the challenge in the automatic identification of Parkinson’s Disease still persists. In order to cope with this problem, we propose to employ Restricted Boltzmann Machines (RBMs) to learn features in an unsupervised fashion by analyzing images from handwriting exams, which aim at assessing the writing skills of potential individuals. These are one of the main symptoms of PD-prone people, since such kind of ability ends up being severely affected. We show that RBMs can learn proper features that help supervised classifiers in the task of automatic identification of PD patients, as well as one can obtain a more compact representation of the exam for the sake of storage and computational load purposes. KW - Bevölkerung KW - Handschrift KW - maschinelles Lernen Y1 - 2017 SN - 978-3-319-64697-8 U6 - https://doi.org/10.1007/978-3-319-64698-5_7 VL - 10425 SP - 70 EP - 80 PB - Springer ER - TY - CHAP A1 - Betz, Michael A. A1 - Lechner, Alfred T1 - Sprayganik - Spraytool für organische Halbleiter T2 - 7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, München N2 - Sprühbeschichtung stellt einen kostengünstigen und materialeffizienten aber komplexen Prozess dar. Um diese Vorteile für die Abscheidung teurer organischer Halbleiter zu nutzen, wurde ein Sprühbeschichter entwickelt, der neueste Anforderungen an den Prozess erfüllt. Zudem konnten selbstansaugende Mikrosprühdüsen mikrotechnologisch in Silizium realisiert werden, welche bereits eine bis zu vierfache Materialeffizienz im Vergleich zu herkömmlichen airbrush-Düsen nachweisen konnten. Die neueste Düsengeneration zeigt nun eine weiter verbesserte Zerstäubung, was bei gesprühten OPDs zu einer reduzierten Dunkelstromdichte von 9,1×10-6 mA·cm-2 (-5 V) und erhöhten externen Quanteneffizienz von 78,5% (530 nm, -5 V) führt. N2 - Generally, spray coating is a cheap and material efficient but complex process. To exploit those advantages for deposition of expensive organic semiconductors, we developed a spray coater to fulfil latest requirements. Furthermore, it was possible to realize venturi micro nozzles that already showed up to 4-fold material efficiency when compared to conventional airbrush-nozzles. The latest nozzle layout shows an even better atomization resulting in photodiodes with a reduced dark current density of 9,1×10-6 mA·cm-2 (-5 V) and increased external quantum efficiency of 78,5% (530 nm, -5 V). KW - Dunkelstrom KW - organischer Halbleiter KW - Photodiode KW - Silicium KW - Spritzbeschichten KW - Spritzschicht KW - Sprühdüse KW - Zerstäubung Y1 - 2017 SN - 978-3-8007-4491-6 SP - 747 EP - 750 PB - VDE-Verlag CY - München ER - TY - CHAP A1 - Roth, Carina A1 - Hausler, Peter A1 - Bierl, Rudolf T1 - Einbindung eines 2D-Photodetektors in einen hochintegrierten SPR-Imaging-Sensor T2 - 7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, München N2 - Die Oberflächenplasmonenresonanzspektroskopie (SPR) ist eine hochempfindliche Messmethode, die es erlaubt, Gase und Flüssigkeiten zerstörungs- und markierungsfrei in Echtzeit zu analysieren. Bisher vornehmlich im Labormaßstab in der Bioanalytik und dem Wirkstoffscreening eingesetzt, soll diese Technologie nun miniaturisiert und für weitere Anwendungsgebiete zugänglich gemacht werden. Dazu wird ein kompakter Micro-Opto-Electro-Mechanical Systems Sensor (MOEMS) entwickelt, der mit Hilfe des SPR Imaging Änderungen der chemischen Zusammensetzung verschiedener Flüssigkeiten inline messen kann. N2 - Surface plasmon resonance spectroscopy (SPR) is a highly sensitive measurement method which allows the analysis of gases and liquids in real-time in a non-destructive and marking-free manner. Presently SPR is predominantly used for pharmaceutical screening and biotechnical analysis. Now this technology is to be miniaturized and made accessible for further application areas. For this purpose, a compact micro-opto-electro-mechanical system sensor (MOEMS) is developed, which can measure changes in the chemical composition of different fluids using SPR imaging. T2 - Integration of a 2D-photodetector in a SPR-Imaging-Sensor KW - Bildsensor KW - Bioanalytik KW - chemische Zusammensetzung KW - Fotodetektor KW - Labormaßstab KW - Messmethode KW - mikrooptoelektromechanisches System KW - Oberflächenplasmon KW - Oberflächenplasmonenresonanzspektroskopie KW - pharmazeutisches Screening KW - Spektroskopie KW - Wirkstoff Y1 - 2017 SN - 978-3-8007-4491-6 SP - 848 EP - 850 PB - VDE-Verlag CY - München ER - TY - CHAP A1 - Ławrowski, Robert Damian A1 - Deml, Sonja A1 - Varghese, T. A1 - Schimpke, T. T1 - Leuchtdiodenchips mit dreidimensional epitaktisch gewachsenen kristallinen GaN Säulen T2 - 7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, München N2 - Um die Eigenschaften von Leuchtdioden zu verbessern und den Herstellungsprozess zu vereinfachen, wurde ein erweitertes Verfahren der metallorganischen Gasphasenepitaxie verwendet, um dichtgepackte dreidimensionale GaN-Säulen mit hohen Aspektverhältnis auf Chipoberflächen zu wachsen. Diese selbstorganisierenden dreidimensionalen Strukturen sollen einerseits die lichtabstrahlende Oberfläche der Leuchtdiode bei gleichbleibender Chipgröße vergrößern und andererseits durch die nichtpolaren Kristallebenen an den Seiten- und Deckflächen der Säulen die Effizienz dieser Bauteile erhöhen. Messungen an ersten Bauteilen, die mit dieser Methode realisiert wurden, zeigen eine homogene blaue Emission bei Wellenlängen von 450 nm und abgestrahlte Lichtleistungen von bereits mehr als 50 mW bei Stromdichten von 120 A/cm². Diese Ergebnisse sind bereits sehr vielversprechend und lassen eine deutliche Performancesteigerung bei Optimierung der Herstellungstechnologie erwarten. N2 - In order to increase the performance and to simplify the production of light emitting diode chips, an advanced metal organic vapor-phase-epitaxy process was used for the growth of densely packed high-aspect-ratio GaN microrods on the chip surface. The purpose of these self-organizing structures is, to increase the effective light emitting surface of the chip as well as to improve the efficiency. Measurements on first structures have shown blue emission at wavelengths of 450 nm and emitted output power of more than 50 mW at current densities of 120 A/cm². These promising results let us expect a significant improvement when optimizing the fabrication process further. T2 - Light emitting diodes based on three-dimensional epitaxial grown crystalline GaN rods KW - Aufbauorganisation KW - Ausgangsleistung KW - dreidimensionale Struktur KW - Fertigungstechnologie KW - Herstellungsablauf KW - Kristallebene KW - Leuchtdiode KW - Metalldampf KW - metallorganische Gasphasenepitaxie KW - organischer Dampf KW - Produktionsprozess KW - Stromdichte KW - Wellenlänge Y1 - 2017 SN - 978-3-8007-4491-6 SP - 131 EP - 134 PB - VDE-Verlag CY - München ER - TY - JOUR A1 - Schroll-Decker, Irmgard T1 - Rezension vom 16.11.2017 zu: Erich Schützendorf: Meine Lebensverfügung für ein gepflegtes Alter. Ernst Reinhardt Verlag (München) 2017. ISBN 978-3-497-02711-8 JF - socialnet Rezensionen Y1 - 2017 UR - https://www.socialnet.de/rezensionen/23361.php SN - 2190-9245 ER - TY - JOUR A1 - Schroll-Decker, Irmgard T1 - Rezension vom 04.04.2017 zu: Beate Hörr, Wolfgang Jütte (Hrsg.): Weiterbildung an Hochschulen. Der Beitrag der DGWF zur Förderung wissenschaftlicher Weiterbildung. W. Bertelsmann Verlag GmbH & Co. KG (Bielefeld) 2017. ISBN 978-3-7639-5564-0 JF - socialnet Rezensionen Y1 - 2017 UR - https://www.socialnet.de/rezensionen/22439.php SN - 2190-9245 ER - TY - JOUR A1 - Zauner, Martin T1 - Rezension vom 10.01.2017 zu: Janine Berg-Peer: Moderation von Selbsthilfegruppen. Ein Leitfaden. Psychiatrie Verlag GmbH (Köln) 2016. ISBN 978-3-88414-651-4 JF - socialnet Rezensionen Y1 - 2017 UR - https://www.socialnet.de/rezensionen/21074.php SN - 2190-9245 ER - TY - JOUR A1 - Schroll-Decker, Irmgard T1 - Rezension vom 27.06.2017 zu: Helga Blum, Christina Zieger: Und immer wieder lockt das Leben. Kurze Geschichten für Senioren zum Lesen und Vorlesen. Ernst Reinhardt Verlag (München) 2017. 2. Auflage. ISBN 978-3-497-02581-7 JF - socialnet Rezensionen Y1 - 2017 UR - https://www.socialnet.de/rezensionen/22821.php SN - 2190-9245 ER -