TY - CHAP A1 - Schröpfer, Johannes A1 - Schwägerl, Felix A1 - Westfechtel, Bernhard T1 - Consistency control for model versions in evolving model-driven software product lines T2 - 2019 ACM/IEEE 22nd International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), Munich, Germany N2 - Model-driven software product lines evolve in both time and space. Consistency control for model versions constitutes a key challenge. We propose a novel approach to consistency control called well-formedness analysis and repair: Instead of attempting to guarantee consistency of each configurable version a priori (which is hard and restrictive), consistency is controlled only when a product version is actually configured. Conflicts, i.e., violation of well-formedness constraints, are detected and repaired, driven by configurable strategies. This approach is generic; it is instantiated for feature models (for the variability model) and EMF models (as domain artifacts). Y1 - 2019 U6 - https://doi.org/10.1109/MODELS-C.2019.00043 SP - 268 EP - 277 PB - IEEE ER - TY - THES A1 - Thumann, Maria T1 - Anpassung der Verarbeitungseigenschaften von Frischbetonmischungen für die Entwicklung von Spritzbetonen mit reduziertem Versinterungspotential N2 - In nicht druckwasserhaltenden Tunnelbauwerken wird das Bergwasser über Entwässerungs� systeme gesammelt und aus dem Bauwerk geleitet. Versinterungen der Drainageleitungen des sekundären Entwässerungssystems führen zu Querschnittsverminderungen und -verschlüssen, wodurch die gezielte Ableitung des Bergwassers aus dem Bauwerk gestört wird. Zur Vermeidung von Schäden am Tunnelbauwerk oder von Wassereintritten in den Tunnel, aufgrund eines Anstiegs des Bergwasserdrucks hinter der Innenschale, sind regelmäßige Reinigungsarbeiten erforderlich. Die Reinigung der Drainageleitungen ist häufig sehr kosten� intensiv und führt zu Verkehrsbehinderungen in den Tunneln. Die Entstehung von Versinterungen wird durch die chemisch-physikalische Zusammensetzung des Bergwassers, die Umgebungsbedingungen im Bereich des Tunnels, die Ausführung des Entwässerungssystems und den Kontakt des Bergwassers mit zementgebundenen Materialien, z. B. dem Spritzbeton, beeinflusst. Ein Ansatz, um die Entstehung von Versinterungen zu reduzieren, ist die Optimierung der Spritzbetonrezeptur. Die Änderung der Rezeptur� zusammensetzung beeinflusst aber auch die Verarbeitbarkeit der Frischbetonmischung, die Frühfestigkeitsentwicklung des jungen Spritzbetons und die Festigkeitsentwicklung des Spritzbetons. Die Versuchsergebnisse von Auslaugversuchen mit Mörtel-, Spritzmörtel- und Spritzbeton� proben im Rahmen dieser Arbeit belegen, dass das Versinterungspotential durch eine Reduzierung des Klinkergehalts im Bindemittel, den Einsatz von puzzolanischen oder latent� hydraulischen Zusatzstoffen und eine geringe Porosität reduziert wird. Die Änderungen der Bindemittelzusammensetzung des Spritzbetons haben Auswirkungen auf den Klinkergehalt, den Wasserbedarf und den Leimgehalt und damit auch auf die Verarbeitbarkeit der Frischbetonmischung. Für die Beurteilung der Verarbeitbarkeit, v. a. der Pumpbarkeit, von Frischbetonen und Frischbetonmischungen wurden Konsistenzprüfverfahren, rheologische Prüfverfahren und Prüfverfahren zur Beurteilung der Stabilität ausgewählt. Ihre Eignung und Aussagekraft wurde bei Pumpversuchen mit einer mobilen Spritzbetonmaschine verifiziert. Für die Pumpbarkeit von Frischbetonmischungen ist zum einen ein ausreichendes Leimvolumen zur Ausbildung einer Gleitschicht an der Rohrwandung erforderlich und zum anderen müssen die Mischungen unter Druck ausreichend stabil bleiben, damit während des Pumpens keine Blockaden in den Förderleitungen auftreten. Sofern diese Aspekte bei den entwickelten Rezepturen erfüllt sind, ist eine ausreichende Verarbeitbarkeit der Frischbetonmischungen erreicht. Darüber hinaus konnten die Anforderungen an die Frühfestigkeitsentwicklung und die 28 d Druckfestigkeit der Spritzbetone mit optimierten Mischungen erfüllt werden. Im Rahmen dieser Arbeit wurde gezeigt, welche Aspekte bei der Entwicklung von Spritzbetonen mit einem reduzierten Versinterungspotential berücksichtigt werden müssen, um auch die genannten baupraktischen Anforderungen zu erfüllen. N2 - In double-shell tunnel linings, the construction of ‚umbrella’ insulations helps preventing water ingress: depressurized ground water is led to drainage pipes, relieving the tunnel lining from water pressure. However, these solutions are associated in many cases with sintering (precipitation of carbonates) in the drainage system. Over time, the drainage pipes get clogged and the water cannot flow off. Subsequently, the water pressure increases and the tunnel may be damaged. The cleaning of the drainage pipes during operation of traffic tunnels is possible, but very costly and time consuming. To minimize the tunnel maintenance work, it is crucial to reduce such precipitations to a minimum. The parameters that influence the sintering process are (i) the chemical composition of the ground water, (ii) the environmental conditions, (iii) the design of the drainage system, (iv) and the contact of the water with cementitious materials, e.g. the sprayed concrete. In fact, the mix design of the sprayed concrete can be adapted to develop mixes with low sintering potential. To achieve this purpose special care has to be taken to avoid compromising the workability of the wet mix, the early strength development of the young sprayed concrete and the strength development of the hardened sprayed concrete. Results of leaching tests show that the calcium released from mortar, sprayed mortar and sprayed concrete samples can be reduced by lowering the clinker content of the binder, by adding supplementary cementitious materials, or by producing a dense matrix. Changes in the binder composition influence the clinker content in the binder, the water demand, the paste content, and thus the workability of the wet-mixes. The workability, and specifically the pumpability, of the wet-mixes was characterised using different test methods. The reliability of the selected test-methods was verified in pumping tests with a spraying machine. Results of lab tests and pumping tests show that the pumpability of wet-mixes requires, on the one hand, sufficient paste volume to form a lubricating layer on the pipe wall and, on the other hand, that the concrete remains stable even under pressure to avoid blockages in the conveying pipe. In addition to the requirements concerning the workability of the wet-mix, the requirements for early strength development and 28 day compressive strength of the sprayed concrete must be met. This work describes the various aspects that have to be taken into account when designing new mixes for sprayed concrete with low sintering potential, fulfilling at the same time the corresponding requirements for workability and hardened concrete properties. Y1 - 2019 UR - https://www.baustoffe.ruhr-uni-bochum.de/bs/mam/content/dissertation_maria_thumann.pdf CY - Regensburg ER - TY - JOUR A1 - Pierobon, Chiara T1 - EU’s support to civil society in Kazakhstan: A pilot evaluation of the social capital generated JF - Evaluation N2 - In the last decade, several studies have been devoted to the analysis of the EU’s support to civil society abroad, but only recently has scholarly attention turned to Central Asia. Most of the research in this field has adopted a macro-level perspective, concerned with the supply side of external democratization, and has examined external assistance to civil society in terms of democratization ideal types and typologies. The main contribution of this study consists of a meso-level analysis of the outcomes of the EU’s support to civil society in terms of production of social capital, conceived as the raw material of civil society itself. More precisely, the article evaluates the first wave of grants awarded to civil society organizations in Kazakhstan as part of two EU funding schemes—the European Instrument for Democracy and Human Rights and the Non-State Actors and Local Authorities in Development. The article sheds new light on the use of social capital and its two dimensions-structural and cognitive-as heuristic tools for evaluating civil society support programs. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-87394 VL - 25 IS - 2 SP - 207 EP - 223 PB - Sage ER - TY - JOUR A1 - Reschke, Johannes A1 - Auburger, Marie-Theres A1 - Marichalar, Rebeca A1 - Neumann, Cornelius T1 - Communication between automated vehicles and pedestrians JF - ATZ worldwide Y1 - 2019 U6 - https://doi.org/10.1007/s38311-019-0098-z VL - 121 IS - 9 SP - 16 EP - 23 PB - Springer Nature CY - Wiesbaden ER - TY - BOOK A1 - Lukesch, Maximilian A1 - Kellner, Florian T1 - Übungsbuch Produktionswirtschaft N2 - Dieses Buch bietet mehr als 60 Übungsaufgaben und Fallstudien inklusive ausführlicher Lösungen zu ausgewählten Themen der Produktionswirtschaft. Jedes Kapitel enthält eine kurze Einleitung sowie zu erreichende Lernziele. Querverweise auf das Lehrbuch „Produktionswirtschaft“ von Kellner/Lienland/Lukesch erleichtern das Selbststudium und eine optimale Prüfungsvorbereitung. Der Inhalt Produktionsfaktoren: Mensch, Betriebsmittel, Material, Information Produktionsplanung: Lineare Programmierung, Bedarfsrechnung, Materialbedarfsplanung Produktionssteuerung: Reihenfolgeplanung Industrie 4.0 Die Autoren Maximilian Lukesch, M. Sc./MBA, ist wissenschaftlicher Mitarbeiter am Lehrstuhl für Betriebswirtschaftslehre, insb. Controlling und Logistik der Universität Regensburg. Dr. Florian Kellner ist Akademischer Rat am Lehrstuhl für Betriebswirtschaftslehre, insb. Controlling und Logistik der Universität Regensburg. Y1 - 2019 SN - 9783662576892 U6 - https://doi.org/10.1007/978-3-662-57689-2 PB - Springer Gabler CY - Berlin ER - TY - CHAP A1 - Lukesch, Maximilian A1 - Kellner, Florian ED - Pradel, Uwe-Heiner T1 - Geoinformationssysteme für Logistikmanager: Eine praxisorientierte Einführung am Beispiel der Freeware QGIS T2 - Praxishandbuch Logistik Y1 - 2019 PB - Wolters Kluwer CY - Köln ER - TY - JOUR A1 - Kellner, Florian A1 - Utz, Sebastian T1 - Sustainability in supplier selection and order allocation: Combining integer variables with Markowitz portfolio theory JF - Journal of Cleaner Production N2 - This research presents a decision support methodology for the multi-criteria supplier selection and order allocation problem. The proposed approach supports purchasing managers in assembling mid-term supplier portfolios while making them aware of the trade-offs between the supplier sustainability, the purchasing costs, and the overall supply risk. First, we propose a multi-objective optimization model with three objectives: to maximize the supplier sustainability, to select the supplier portfolio with the lowest purchasing costs, and to minimize the supply risk. Our model extends existing mathematical approaches that follow the portfolio theory fathered by H. Markowitz by integrating the aspect ‘risk’ into the supplier selection problem. Secondly, since we allow for integer variables in our model—in contrast to the classical Markowitz portfolio theory—we use the ε-constraint method to visualize the efficient surface. The possibility of considering the non-dominated set of supplier portfolios is advantageous for purchasing managers as they gain a picture of the different optimal supplier portfolios and are able to analyze the trade-offs between the different purchasing goals before making a decision. Finally, we illustrate the applicability of the proposed methodology in a real-world supplier selection and order allocation case from the automotive industry. In the example case, we identify 1754 optimal supplier portfolios that may be assembled based on the eight available suppliers. Our analyses show that each optimal portfolio consists of two suppliers, with one specific supplier being included in each portfolio. Furthermore, four suppliers are not part of any optimal solution. Y1 - 2019 U6 - https://doi.org/10.1016/j.jclepro.2018.12.315 VL - 214 SP - 462 EP - 474 PB - Springer Nature ER - TY - JOUR A1 - Kellner, Florian A1 - Schneiderbauer, Miriam T1 - Further insights into the allocation of greenhouse gas emissions to shipments in road freight transportation: The pollution routing game JF - European Journal of Operational Research N2 - At present, there is no globally accepted standard for the allocation of greenhouse gas (GHG) emissions to shipments in road freight transportation. The only official international standard for emission calculation of transport operations is the European Norm EN-16258. However, even this norm still allows choosing from several alternative emission allocation schemes. This research aims to harmonize the process of GHG declarations for supply chains by identifying among all allocation units specified by EN-16258 the one that describes a shipment's contribution to GHG emissions best. For this purpose, concepts of the cooperative game theory are used. First, we develop three transport scenarios that allow studying a shipment's effect on GHG: a vehicle routing problem, a network flow model, and a mixed scenario. Our approach extends previous research projects because we take into account that shipment characteristics in terms of origin, destination, weight, and volume consume transport capacities to different degrees, impact the routing of the commercial vehicles and, thus, determine GHG. Second, we present the results of a computational study that bases on the introduced transport scenarios and that compares the allocation vectors resulting from the EN-16258 allocation rules with the Shapley value, which serves as a benchmark for a shipment's contribution to GHG. Furthermore, we show how often the EN-16258 allocation principles are in line with a set of game theoretical fairness criteria. The results indicate that the allocation unit ‘distance’ is the closest to the game theory benchmark and most often in line with game theoretical fairness criteria. Y1 - 2019 U6 - https://doi.org/10.1016/j.ejor.2019.04.007 VL - 278 IS - 1 SP - 296 EP - 313 PB - Elsevier ER - TY - JOUR A1 - Kellner, Florian A1 - Lienland, Bernhard A1 - Utz, Sebastian T1 - An a posteriori decision support methodology for solving the multi-criteria supplier selection problem JF - European Journal of Operational Research N2 - This research presents a novel, state-of-the-art methodology for solving a multi-criteria supplier selection problem considering risk and sustainability. It combines multi-objective optimization with the analytic network process to take into account sustainability requirements of a supplier portfolio configuration. To integrate ‘risk’ into the supplier selection problem, we develop a multi-objective optimization model based on the investment portfolio theory introduced by Markowitz. The proposed model is a non-standard portfolio selection problem with four objectives: (1) minimizing the purchasing costs, (2) selecting the supplier portfolio with the highest logistics service, (3) minimizing the supply risk, and (4) ordering as much as possible from those suppliers with outstanding sustainability performance. The optimization model, which has three linear and one quadratic objective function, is solved by an algorithm that analytically computes a set of efficient solutions and provides graphical decision support through a visualization of the complete and exactly-computed Pareto front (a posteriori approach). The possibility of computing all Pareto-optimal supplier portfolios is beneficial for decision makers as they can compare all optimal solutions at once, identify the trade-offs between the criteria, and study how the different objectives of supplier portfolio configuration may be balanced to finally choose the composition that satisfies the purchasing company's strategy best. The approach has been applied to a real-world supplier portfolio configuration case to demonstrate its applicability and to analyze how the consideration of sustainability requirements may affect the traditional supplier selection and purchasing goals in a real-life setting. Y1 - 2019 U6 - https://doi.org/10.1016/j.ejor.2018.06.044 VL - 272 IS - 2 SP - 505 EP - 522 PB - Springer ER - TY - BOOK A1 - Kellner, Florian A1 - Brabänder, Christian T1 - VBA mit Excel : Einführung für Betriebswirte N2 - Dieses Buch bietet eine anwendungsorientierte Einführung in die Programmierung mit Visual Basic for Applications (VBA) in Microsoft Excel. Es ermöglicht auch Einsteigern die selbstständige Lösung kleiner bis mittelgroßer Programmieraufgaben aus dem betriebswirtschaftlichen Alltag. Der Schwierigkeitsgrad der Inhalte ist überwiegend einfach gehalten, sodass Nutzer, die bereits grundlegende Tätigkeiten in MS Excel beherrschen, sich nach ihren jeweiligen Anforderungen entsprechend fortbilden können. Zahlreiche Praxisbeispiele und Übungen, die auf einem Windows-Betriebssystem entwickelt und getestet wurden, unterstützen das Lernen Schritt für Schritt und zeigen, wie hilfreich VBA durch Automatisierung und Individualisierung in jedem Büro sein kann. Y1 - 2019 SN - 9783662597408 U6 - https://doi.org/10.1007/978-3-662-59740-8 PB - Springer Gabler CY - Berlin ER - TY - CHAP A1 - Gmeiner, Cornelia ED - Erkens, Franz-Reiner T1 - Der Torturm der Veste Oberhaus in Passau T2 - Passauer Jahrbuch KW - Historische Bauforschung KW - Bauaufnahme KW - Mittelalter Y1 - 2019 SN - 1862-3212 VL - 61 SP - 83 EP - 132 CY - Passau ER - TY - JOUR A1 - Schwägerl, Felix A1 - Westfechtel, Bernhard T1 - Integrated revision and variation control for evolving model-driven software product lines JF - Software and systems modeling N2 - Software engineering projects are faced with abstraction, which is achieved by software models, historical evolution, which is addressed by revision control, and variability, which is managed with the help of software product line engineering. Addressing these phenomena by separate tools ignores obvious overlaps and therefore fails at exploiting synergies between revision and variation control for models. In this article, we present a conceptual framework for integrated revision and variation control of model-driven software projects. The framework reuses the abstractions of revision graphs and feature models and follows an iterative, revision-control-like approach to software product line engineering called product-based product line development. A single version (i.e., a variant of a selected revision) is made available in a workspace, where the user may apply arbitrary modifications. Based on a user-provided specification of the affected variants, the changes are automatically written back to a transparent repository that relies on an internal multi-version storage. The uniform handling of revisions and variants of models is achieved by transparently mapping version concepts to a semantic base layer, which is defined upon propositional logic. At the heart of the conceptual framework is a dynamic filtered editing model, which allows that the versioned artifacts and the feature model co-evolve. We contribute algorithms for checkout and commit, which satisfy a set of consistency constraints referring to variant specifications in an evolving feature model. This article furthermore addresses the orchestration of collaborative development by distributed replication and the well formedness of text and model artifacts to be checked out into the workspace. The Eclipse-based tool SuperMod demonstrates the feasibility of the conceptual framework. It allows the user to reuse arbitrary editing tools for text-based programming and/or Ecore-based modeling languages. An evaluation based on three case studies investigates the properties of SuperMod with a specific focus on filtered editing. The evaluation demonstrates that the dynamic filtered editing model reduces the cognitive complexity and the amount of user interaction necessary for variation control when compared to unfiltered model-driven approaches to software product line engineering. Y1 - 2019 U6 - https://doi.org/10.1007/s10270-019-00722-3 SN - 1619-1366 VL - 18 IS - 6 SP - 3373 EP - 3420 PB - Springer Science and Business Media ER - TY - JOUR A1 - Cornet, Henriette A1 - Stadler, Sebastian A1 - Kong, Penny A1 - Marinkovic, Goran A1 - Frenkler, Fritz A1 - Sathikh, Peer Mohideen T1 - User-centred design of autonomous mobility for public transportation in Singapore JF - Transportation Research Procedia N2 - The paper presents a set of methods for user-centred design of autonomous mobility for public transportation in the context of a multi-disciplinary research programme in Singapore, called TUMCREATE. While traffic engineers plan the operation of the new mobility system, the Industrial Designers of TUMCREATE take on the role of designing the autonomous vehicles (AVs) and infrastructure for greater comfort and a positive travel experience for users. Tasks have been identified to promote user acceptance and facilitate the operation of autonomously driven vehicles for public transport. To fulfil these tasks, conventional design methods have been enhanced with Virtual Reality (VR) technology and with simulations developed by the computer scientists of TUMCREATE. Since public transportation is a complex and broad area, it cannot be investigated with a single design method. First results showed that conventional methods that consider the Universal Design principles guarantee the accessibility, usability and understandability of AVs and stations. VR has been identified as a suitable tool for Industrial Designers to evaluate communication concepts between AVs and pedestrians. This confirms that digital tools (i.e. VR) enhance conventional design methods, especially with regard to technologies that are not available on the market yet (e.g. AVs) KW - user-centred design KW - public transportation KW - autonomous mobility KW - design methods Y1 - 2019 U6 - https://doi.org/10.1016/j.trpro.2019.09.038 SN - 2352-1465 VL - 41 SP - 191 EP - 203 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Kraus, Hermann A1 - Brückl, Oliver T1 - Automated use of wired measures in grid planning for solving current and voltage band problems T2 - Power and Energy Student Summit (PESS) 2019, Magdeburg N2 - This work deals with the use of cable exchange and parallel cabling as network expansion measures in the context of an automated grid planning for the elimination of current and voltage band problems in a distribution network. Inter alia, reference is made to a higher-level program, which is being developed in the EU project "CrossEnergy", and the procedures for remedying the limit value violations are presented. KW - Netzplanung KW - Automatisierung KW - Netzverstärkung KW - Leitungsmaßnahme Y1 - 2019 SN - 978-3-944722-84-9 U6 - https://doi.org/10.24352/UB.OVGU-2019-086 VL - 77 SP - 207 EP - 211 PB - Otto-von-Guericke-Universität, Institut für Elektrische Energiesysteme CY - Magdeburg ER - TY - BOOK ED - Scheffler, Gabriele T1 - Wohnungslosigkeit in Regensburg : Texte von Studierenden der Sozialen Arbeit : Projektseminar Sommersemester 2018 Y1 - 2019 UR - https://www.oth-regensburg.de/fileadmin/Bereiche/Fakultaet_S/Dateien_Studiengangsseiten/Professoren/Scheffler/OTH_Regensburg_Wohnungslos_final.pdf PB - Ostbayerische Technische Hochschule Regensburg CY - Regensburg ER - TY - JOUR A1 - Schildbach, Ina T1 - Die „soziale Frage als nationale zu rethematisieren“, oder: von der „Arbeitsweltvergessenheit der Populismusforschung“ BT - Rezension zu Karina Becker, Klaus Dörre, Peter Reif-Spirek (Hg.) (2018): Arbeiterbewegung von rechts?, Ungleichheit – Verteilungskämpfe – populistische Revolte. Frankfurt/New York: Campus JF - sub\urban - Zeitschrift für kritische Stadtforschung Y1 - 2019 U6 - https://doi.org/10.36900/suburban.v7i1/2.472 SN - 2197-2567 VL - 7 IS - 1/2 SP - 259 EP - 263 PB - sub\urban e. V. ER - TY - JOUR A1 - Schildbach, Ina T1 - Aufruf: Nationales Denken überwinden! JF - Feinschwarz. Theologisches Feuilleton Y1 - 2019 UR - https://www.feinschwarz.net/aufruf-nationales-denken-ueberwinden/ SN - 2518-3982 PB - Verein Feinschwarz CY - Wien ER - TY - CHAP A1 - Görtler, Michael ED - Lotz, Mathias ED - Pohl, Kerstin T1 - Politik, Bildung, Beschleunigung: Überlegungen zur Bedeutung einer Zeit-Diagnose für die politische Bildung T2 - Gesellschaft im Wandel!? Neue Herausforderungen für die politische Bildung und ihre Didaktik Y1 - 2019 SN - 978-3-7344-0827-4 SP - 61 EP - 68 PB - Wochenschau Verlag CY - Frankfurt/M. ER - TY - JOUR A1 - Schildbach, Ina T1 - Michael Klundt: Gestohlenes Leben. Kinderarmut in Deutschland. PapyRossa Verlag (Köln) 2019. 197 Seiten. ISBN 978-3-89438-696-2 JF - Sozialnet Rezensionen Y1 - 2019 UR - https://www.socialnet.de/rezensionen/26186.php SN - 2190-9245 PB - socialnet CY - Bonn ER - TY - CHAP A1 - Schildbach, Ina ED - Boehnke, Lukas ED - Thran, Malte ED - Wunderwald, Jacob T1 - "Die neue deutsche Soziale Frage": Armut und Sozialstaatsversagen als Grund für rechtspopulistischen Erfolg? T2 - Rechtpopulismus im Fokus – Theoretische und praktische Herausforderungen für die politische Bildung N2 - Seit den Aufmärschen von „Patriotische Europäer gegen die Islamisierung des Abendlandes“ (Pegida) und den Wahlerfolgen der Alternative für Deutschland (AfD) beschäftigt das Phänomen des Rechtspopulismus und -extremismus Öffentlichkeit und Politik. Tatsächlich ist dieses jedoch älter als die Aufgeregtheit der Diskussion glauben macht. In diesem Sinne bemerkt beispielsweise der renommierte Konfliktforscher Wilhelm Heitmeyer, der mit seiner Forscher_innengruppe seit langem auf die Verbreitung von rechten Einstellungen in Deutschland hinweist, dass ihn der Erfolg der AfD keineswegs wundere (vgl. Interview in der Berliner Zeitung vom 22.10.16). Y1 - 2019 SN - 978-3-658-24299-2 U6 - https://doi.org/10.1007/978-3-658-24299-2_5 SP - 73 EP - 88 PB - Springer VS CY - Wiesbaden ER - TY - CHAP A1 - Kühnel, Renate ED - Steffen-Wittek, Marianne ED - Weise, Dorothea ED - Zaiser, Dierk T1 - Klang – Körper – Farbe T2 - Rhythmik – Musik und Bewegung. Transdisziplinäre Perspektiven Y1 - 2019 SN - 978-3-8394-4371-2 U6 - https://doi.org/10.14361/9783839443712-027 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Kühnel, Renate T1 - Durch Selbsttätigkeit zum Selbstwert JF - Rhythmik Y1 - 2019 IS - 35/36 SP - 8 EP - 12 PB - Berufsverband Rhythmik Schweiz CY - Gelterkinden ER - TY - JOUR A1 - Schöberl, Cora A1 - Görtler, Michael T1 - »Wir müssen auch über uns reden! Migration, Rechtspopulismus und Erwachsenenbildung.« JF - DIE – Zeitschrift für Erwachsenenbildung N2 - In diesem Beitrag werden empirische Perspektiven auf die politische Bildungspraxis mit Erwachsenen in Zeiten von Angst und Unsicherheit diskutiert. Dabei liegt die Annahme zugrunde, dass politische Bildungsarbeit mit Erwachsenen unter widrigen Bedingungen geleistet werden muss. Dieser Standpunkt stützt sich einerseits auf den Fachdiskurs, Positionspapiere von Fachverbänden und Erfahrungsberichte, andererseits auf die Ergebnisse aus qualitativen Untersuchungen der Verfasserin und des Verfassers dieses Beitrags. Y1 - 2019 VL - 65 IS - 3 PB - Vandenhoeck & Ruprecht CY - Böhlau ER - TY - BOOK ED - Timpe, Jakob T1 - 7 Year Itch BT - Sieben Jahre Studiengang Industriedesign an der Ostbayerischen Technischen Hochschule Regensburg 2011-2019 KW - Designstudium KW - Industriedesign KW - Produktgestaltung KW - Ostbayerische Technische Hochschule Regensburg Y1 - 2019 SN - 978-3-96018-086-9 PB - Morsbach CY - Regensburg ER - TY - JOUR A1 - Görtler, Michael T1 - Zur Diskussion: Kinder- und Jugendhilfe mit Geflüchteten. Professionelles Handeln unter schwierigen Bedingungen JF - Unsere Jugend N2 - Im Fach- und Praxisdiskurs der Kinder- und Jugendhilfe findet sowohl die Situation Geflüchteter als auch die der darin tätigen Sozialarbeiterinnen und Sozialarbeiter vergleichsweise wenig Beachtung. Insbesondere die Widersprüche, die beim professionellen Handeln auftreten, werden kaum thematisiert. KW - Flüchtling KW - Jugendhilfe KW - Sozialarbeiter Y1 - 2019 U6 - https://doi.org/10.2378/uj2019.art14d SN - 0342-5258 VL - 71 IS - 2 SP - 89 EP - 93 PB - Reinhardt CY - München ER - TY - JOUR A1 - Braun, Carina N. T1 - Wenn uns unsere eigene Innovationskraft ausbremst JF - changement! N2 - Unternehmen stehen unter dem stetigen Druck, innovativ zu sein. Das gelingt nur, wenn Mitarbeiterinnen und Mitarbeiter die neuen Ideen auch umsetzen. Gerade in Zeiten, in denen eine Innovation auf die nächste folgt, wird das aber immer schwieriger. Denn die Frequenz und die Erfolgsrate von Innovationen werden von der Belegschaft bewertet und bestimmen über das Engagement in nachfolgenden Innovationsprozessen. Y1 - 2019 IS - 2 SP - 40 EP - 41 PB - HANDELSBLATT MEDIA GROUP CY - Hamburg ER - TY - JOUR A1 - Schöberl, Cora A1 - Görtler, Michael T1 - Politische Bildungsarbeit unter widrigen Bedingungen? Empirische Perspektiven auf die Praxis JF - Erwachsenenbildung - EB : Vierteljahresschrift für Theorie und Praxis N2 - In diesem Beitrag werden empirische Perspektiven auf die politische Bildungspraxis mit Erwachsenen in Zeiten von Angst und Unsicherheit diskutiert. Dabei liegt die Annahme zugrunde, dass politische Bildungsarbeit mit Erwachsenen unter widrigen Bedingungen geleistet werden muss. Dieser Standpunkt stützt sich einerseits auf den Fachdiskurs, Positionspapiere von Fachverbänden und Erfahrungsberichte, andererseits auf die Ergebnisse aus qualitativen Untersuchungen der Verfasserin und des Verfassers dieses Beitrags. KW - Angst KW - Bildungsangebot KW - Bildungsarbeit KW - Erwachsenenbildung KW - Gesellschaft KW - Politische Bildung KW - Populismus Y1 - 2019 U6 - https://doi.org/10.13109/erbi.2019.65.3.124 SN - 2365-4953 VL - 65 IS - 3 SP - 124 EP - 127 PB - Vandenhoeck & Ruprecht ER - TY - JOUR A1 - Görtler, Michael T1 - Widersprüche professionellen Handelns: Situative Anforderungen zwischen Fach- und Sozialbezug in der Weiterbildungsberatung JF - Weiterbildung - Zeitschrift für Grundlagen, Praxis und Trends Y1 - 2019 SN - 1861-0501 IS - 1 PB - Luchterhand CY - München ER - TY - JOUR T1 - Energieforschung BT - geförderte Projekte 2017 bis 2019 N2 - Über uns Das Regensburg Center of Energy and Resources (RCER) bündelt seit 2012 die Aktivitäten der Ostbayerischen Technischen Hochschule Regensburg (OTH Regensburg) und der regionalen Wirtschaftsunternehmen auf dem Strategiefeld „Energie und Ressourcen“. Mission: Energieforschung: vernetzen, voranbringen, vermitteln Das RCER fördert die Vernetzung verschiedener Disziplinen der Energieforschung innerhalb der OTH Regensburg und mit externen Partnern (Firmen, Förderträgern, Forschungsinstitutionen, öffentlichen Einrichtungen). Das RCER ist Ihr Partner beim Voranbringen von Kooperationen und Forschungsvorhaben durch Unterstützung in der Antragsphase, bei der Einwerbung von Projektmitteln und Projektbegleitung im Energiebereich. Das RCER steht für die Vermittlung von Know-how, Basiswissen, aktuellen Fragen und den Technologietransfer rund um das Thema Energie zwischen Wissenschaft, Wirtschaft, Gesellschaft und Politik. Vision Wir sind Ihr erster Ansprechpartner und Motor für innovative Energieforschung. Werte Verlässlichkeit, Kompetenz, Verantwortungsbewusstsein.Regional verwurzelt und weltoffen Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-65439 PB - OTH Regensburg ET - Ausgabe 2020 ER - TY - JOUR A1 - Schildbach, Ina T1 - Rezension vom 20.04.2020 zu: Margrit Stamm (Hrsg.): Arbeiterkinder und ihre Aufstiegsangst. Probleme und Chancen von jungen Menschen auf dem Weg nach oben. Verlag Barbara Budrich GmbH (Opladen, Berlin, Toronto) 2019. ISBN 978-3-8474-2291-4 JF - Socialnet Rezensionen Y1 - 2019 UR - https://www.socialnet.de/rezensionen/26208.php SN - 2190-9245 PB - socialnet GmbH ER - TY - JOUR A1 - Görtler, Michael T1 - Politische Bildung in Zeiten des Rechtspopulismus. Pädagogische und fachdidaktische Ansätze zum Umgang mit einer gegenwärtigen Bedrohung für den Frieden JF - Vierteljahrsschrift für wissenschaftliche Pädagogik N2 - Right-wing populism challenges the societies in Europe. The rise of such movements and parties are a threat to peace and democracy in Germany. This article focuses the possibilities as well as the boundaries of political education under the current circumstances. To this end, it discusses theoretical explanations based on approaches in peace education, political didactics and social sciences to deal with right-wing populism in practice. (DIPF/Orig.). T2 - Political education in times of right-wing populism : Pedagogical and didactical approaches to deal with a current threat to peace KW - Begriff KW - Demokratie KW - Fachdidaktik KW - Frieden KW - Friedenspädagogik KW - Pädagogik KW - Politische Bildung KW - Populismus KW - Sozialwissenschaften Y1 - 2019 U6 - https://doi.org/10.30965/25890581-09501006 SN - 2589-0581 VL - 95 IS - 1 SP - 61 EP - 73 PB - Brill ER - TY - JOUR A1 - Schildbach, Ina T1 - „Politiker sind doch eh nicht unabhängig“ oder: Alltagshelden im Umgang mit Stammtischparolen JF - Gemeinde creativ Y1 - 2019 UR - https://www.gemeinde-creativ.de/_media/magazin/pdf/2019/GC_004_2019_-_Druckversion.pdf SN - 1618-8322 VL - 62 IS - Juli-August SP - 25 EP - 25 CY - München ER - TY - JOUR A1 - Süzeroglu-Melchiors, Sevim A1 - Brunner, Richard T1 - The Licence to Win: Licensing out Technologies from an SME’s Perspective JF - Bulletin / European IP Helpdesk Y1 - 2019 UR - https://op.europa.eu/en/publication-detail/-/publication/3ae24438-9c73-11e9-9d01-01aa75ed71a1/language-en/format-PDF/source-164622948 IS - 1 SP - 6 EP - 7 PB - European Commission’s Executive Agency for Competitiveness and Innovation (EACI) ER - TY - JOUR A1 - Müller, Jasmin A1 - Schütz, Sandra A1 - Brodersen, Folke T1 - Jugendforschung inklusiv und digital: Möglichkeiten, Voraussetzungen und Grenzen von Gebärdensprachvideos in digitalen Erhebungen JF - Diskurs Kindheits- und Jugendforschung N2 - Durch die voranschreitende Digitalisierung bieten sich neue Ansätze für Designs und Methoden in der Jugendforschung. Mit vielfältigen digitalen Möglichkeiten wachsen auch Chancen für inklusiv angelegte Befragungen. Dieser Beitrag fokussiert exemplarisch gehörlose bzw. hörbeeinträchtigte gebärdensprachige Jugendliche und stellt nach einem theoretischen und empirischen Überblick die Frage, ob und inwieweit diese heterogene Gruppe Jugendlicher durch in digitale Fragebögen implementierte Videos in Gebärdensprache profitieren kann. Anhand zweier kontrastiver Fallvignetten sollen Erfahrungen aus dem Projekt „Inklusive Methoden“ in Bezug auf Möglichkeiten, Voraussetzungen, Herausforderungen und Grenzen digitaler Befragungen mit Gebärdensprachvideos dargestellt und diskutiert werden. KW - Digitale Befragung KW - Gebärdensprachvideos KW - Inklusion KW - Gehörlosigkeit und Hörbeeinträchtigung KW - Jugendforschung Y1 - 2019 U6 - https://doi.org/10.3224/diskurs.v14i3.05 VL - 14 IS - 3 SP - 308 EP - 322 PB - Barbara Budrich CY - Leverkusen ER - TY - GEN A1 - Wagner, Thomas A1 - Krenkel, Lars A1 - Dönitz, Christian A1 - Brawanski, Alexander T1 - Influence of CFD Strategy on WSS and OSI Determination for Intracranial Aneurysm Rupture Assessment T2 - 25th Congress of the European Society of Biomechanics, July 7-10, 2019, Vienna, Austria Y1 - 2019 ER - TY - GEN A1 - Tauwald, Sandra Melina A1 - Krenkel, Lars T1 - Elementary experimental setup for flow visualization in upper human respiratory tract T2 - 25th Congress of the European Society of Biomechanics, July 7-10, 2019, Vienna, Austria Y1 - 2019 UR - https://esbiomech.org/conference/archive/2019vienna/Contribution_195.pdf ER - TY - GEN A1 - Birkenmaier, Clemens A1 - Dornia, Christian A1 - Lehle, Karla A1 - Krenkel, Lars T1 - Feasibility of detecting thrombotic deposits in membrane oxygenators using micro computed tomography T2 - 25th Congress of the European Society of Biomechanics, July 7-10, 2019, Vienna, Austria Y1 - 2019 UR - https://esbiomech.org/conference/archive/2019vienna/Contribution_129.pdf ER - TY - RPRT A1 - Steiger, Tamara A1 - Foltan, Maik A1 - Philipp, Alois A1 - Müller, Thomas A1 - Gruber, Michael A1 - Bredthauer, Andre A1 - Krenkel, Lars A1 - Birkenmaier, Clemens A1 - Lehle, Karla T1 - Accumulations of von Willebrand factor within ECMO oxygenators: Potential indicator of coagulation abnormalities in critically ill patients? N2 - Clot formation within membrane oxygenators (MOs) remains a critical problem during extracorporeal membrane oxygenation (ECMO). The composition of the clots—in particular, the presence of von Willebrand factor (vWF)—may be an indicator for prevalent nonphysiological flow conditions, foreign body reactions, or coagulation abnormalities in critically ill patients. Mats of interwoven gas exchange fibers from randomly collected MOs (PLS, Maquet, Rastatt, Germany) of 21 patients were stained with antibodies (anti‐vWF and anti‐P‐selectin) and counterstained with 4′,6‐diamidino‐2‐phenylindole. The extent of vWF‐loading was correlated with patient and technical data. While 12 MOs showed low vWF‐loadings, 9 MOs showed high vWF‐loading with highest accumulations close to crossing points of adjacent gas fibers. The presence and the extent of vWF‐fibers/“cobwebs,” leukocytes, platelet–leukocyte aggregates (PLAs), and P‐selectin‐positive platelet aggregates were independent of the extent of vWF‐loading. However, the highly loaded MOs were obtained from patients with a significantly elevated SOFA score, severe thrombocytopenia, and persistent liver dysfunction. The coagulation abnormalities of these critically ill patients may cause an accumulation of the highly thrombogenic and elongated high‐molecular‐weight vWF multimers in the plasma which will be trapped in the MOs during the ECMO therapy. Y1 - 2019 ER - TY - JOUR A1 - Steiger, Tamara A1 - Foltan, Maik A1 - Philipp, Alois A1 - Müller, Thomas A1 - Gruber, Michael A1 - Bredthauer, Andre A1 - Krenkel, Lars A1 - Birkenmaier, Clemens A1 - Lehle, Karla T1 - Accumulations of von Willebrand factor within ECMO oxygenators: Potential indicator of coagulation abnormalities in critically ill patients? JF - Artificial Organs N2 - Clot formation within membrane oxygenators (MOs) remains a critical problem during extracorporeal membrane oxygenation (ECMO). The composition of the clots-in particular, the presence of von Willebrand factor (vWF)-may be an indicator for prevalent nonphysiological flow conditions, foreign body reactions, or coagulation abnormalities in critically ill patients. Mats of interwoven gas exchange fibers from randomly collected MOs (PLS, Maquet, Rastatt, Germany) of 21 patients were stained with antibodies (anti-vWF and anti-P-selectin) and counterstained with 4 ',6-diamidino-2-phenylindole. The extent of vWF-loading was correlated with patient and technical data. While 12 MOs showed low vWF-loadings, 9 MOs showed high vWF-loading with highest accumulations close to crossing points of adjacent gas fibers. The presence and the extent of vWF-fibers/"cobwebs," leukocytes, platelet-leukocyte aggregates (PLAs), and P-selectin-positive platelet aggregates were independent of the extent of vWF-loading. However, the highly loaded MOs were obtained from patients with a significantly elevated SOFA score, severe thrombocytopenia, and persistent liver dysfunction. The coagulation abnormalities of these critically ill patients may cause an accumulation of the highly thrombogenic and elongated high-molecular-weight vWF multimers in the plasma which will be trapped in the MOs during the ECMO therapy. KW - ECMO KW - PLATELET ACTIVATION KW - THROMBOSIS KW - BLOOD FLOW KW - INFLAMMATION Y1 - 2019 U6 - https://doi.org/10.1111/aor.13513 SN - 1525-1594 VL - 43 IS - 11 SP - 1065 EP - 1076 PB - Wiley CY - Hoboken ER - TY - CHAP A1 - De, Sangita A1 - Niklas, Michael A1 - Rooney, Brian A1 - Mottok, Jürgen A1 - Brada, Premek T1 - Towards Semantic model-to-model Mapping of Cross-Domain Component Interfaces for Interoperability of Vehicle Applications : An Approach towards Synergy Exploration T2 - MDE4IoT & ModComp 2019: Model-Driven Engineering for the Internet of Things (MDE4IoT) & Interplay of Model-Driven and Component-Based Software Engineering (ModComp); joint proceedings of the Workshop on Model-Driven Engineering for the Internet of Things (MDE4IoT) & of the Workshop on Interplay of Model-Driven and Component-Based Software Engineering (ModComp); co-located with the IEEE/ACM 22nd International Conference on Model Driven Engineering Languages and Systems (MODELS 2019), Munich, Germany, September 15 and 17, 2019 N2 - With the increase in demand of services in the automotive industry, automotive enterprises prefer to collaborate with other qualified cross-domain partners to provide complex automotive functions (or services), such as autonomous driving, OTA (Over The Air) vehicle update, V2X (Vehicle-to-Vehicle communication), etc. One key element in cross-domain enterprise collaboration is the mutual agreement between interfaces of software components. In this context, model-to-model mappings of software component models of heterogeneous frameworks for automotive services and to explore the synergies in their interface semantics, have become an essential factor in improving the interoperability among the automotive and other cross-domain enterprises. However, one of the challenges in achieving cross-domain component interface model-to-model mappings at an application level lies in detecting the interface semantics and the semantic relations that are conveyed in different component models in different frameworks. This paper addresses this challenge using a Model Driven Architecture (MDA) based analytical approach to explore interface semantic synergies in the cross-domain component meta-models that are used for automotive services. The approach applies manual semantic checking measurements at an application interface level to understand the meanings and relations between the different meta-model entities of cross-domain framework software components. In this research, we attempt to ensure that interface description models of software components from heterogeneous frameworks can be compared, correlated and re-used for automotive services based on semantic synergies. We have demonstrated our approach using component meta-models from cross-domain enterprises, that are used for the automotive application domain. Y1 - 2019 UR - https://ceur-ws.org/Vol-2442/paper8.pdf U6 - https://doi.org/10.13140/RG.2.2.28765.15840 PB - RWTH Aachen CY - Aachen ER - TY - THES A1 - Rackl, Fabian T1 - Mögliche digitale Ansätze zur effizienten Lebenszyklusanalyse von Bauwerken anhand eines BIM-Modells N2 - Ziel dieser Arbeit ist es, mögliche digitale Ansätze zur effizienten Lebenszyklusanalyse von Bauwerken anhand eines BIM-Modells zu definieren. Handlungsanlass dafür waren zum einen das in der Öffentlichkeit allgegenwertige Thema des Klimawandels, welches zumal im Jahre 2019 durch die „Fridays for Future“-Proteste immens befeuert wurde. Zum anderen spielte auch die von der Bundesregierung beschlossene CO2-Bepreisung, mit der langfristig durch Mehreinnahmen ebenso ökologischere Bauweisen gefördert werden sollen, als Anlass für diese Arbeit eine wichtige Rolle. Denn nur im Zusammenspiel mit einer transparenten sowie fortschrittlichen, aber auch digitalen Planungsmethode wie BIM kann in Zukunft eine Umsetzung nachhaltiger Gebäude in einem effizienten Rahmen mehrheitlich zur Anwendung kommen. Zu Beginn, wurden zunächst die theoretischen Hintergründe der im Zuge dieser Arbeit verwendeten Methoden wie Prozessmanagement, BIM oder Ökobilanzierung erläutert. Im nächsten Schritt begann die eigentliche Konzeptionierung möglicher BIM basierter LCA Vorgehensweisen. Dabei wurden Informationsynergien zwischen den beiden Methoden BIM und LCA festgestellt, denkbare Datenaustauschformate zusammengefasst, einzelne Ansätze konzeptionell entworfen sowie aktuelle Softwarelösungen im Bereich der Ökobilanzierung miteinander verglichen. Im Anschluss der Konzeptionierung erfolgte durch die Validierung - anhand nterschiedlicher differenziert dargestellter BIM-Modelle - eine Konkretisierung der entworfenen Ansätze mit Hilfe einer zuvor auserwählten Ökobilanzierungssoftware sowie der Modellierungssoftware Allplan. Während der Validierung wurden ebenso, sofern diese erforderlich waren, Hilfsmittel für eine erfolgreiche Umsetzung der jeweiligen Ansatzes entworfen. Nach Abschluss der praktischen Umsetzung einzelner BIM basierter LCA Ansätze wurden die daraus gewonnen Erkenntnisse offenbart, die unterschiedlichen Vorgehensweisen hinsichtlich ihrer Kosten und in Bezug auf die erwartbare Qualität der generierten ökologischen Ergebnisse gegenübergestellt sowie abschließend durch eine Bewertungsmethodik bewertet. Das Resultat zeigte, dass bereits nach aktuellem Stand der Technik ein Mehrwert für eine Lebenszyklusanalyse ergeben kann, wenn diese zusammen mit einer standardisierten modellbasierten umgesetzt wird. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-35096 CY - Regensburg ER - TY - CHAP A1 - Wein, S. A1 - Tomé, Ana Maria A1 - Goldhacker, Markus A1 - Greenlee, Mark W. A1 - Lang, Elmar Wolfgang T1 - Hybridizing EMD with cICA for fMRI Analysis of Patient Groups T2 - 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC): 23-27 July 2019, Berlin, Germany N2 - Independent component analysis (ICA), as a data driven method, has shown to be a powerful tool for functional magnetic resonance imaging (fMRI) data analysis. One drawback of this multivariate approach is, that it is naturally not convenient for analysis of group studies. Therefore various techniques have been proposed in order to overcome this limitation of ICA. In this paper a novel ICA based work-flow for extracting resting state networks from fMRI group studies is proposed. An empirical mode decomposition (EMD) is used to generate reference signals in a data driven manner, which can be incorporated into a constrained version of ICA (cICA), what helps to overcome the inherent ambiguities. The results of the proposed workflow are then compared to those obtained by a widely used group ICA approach. It is demonstrated that intrinsic modes, extracted by EMD, are suitable to serve as references for cICA to obtain typical resting state patterns, which are consistent over subjects. This novel processing pipeline makes it transparent for the user, how comparable activity patterns across subjects emerge, and also the trade-off between similarity across subjects and preserving individual features can be well adjusted and adapted for different requirements in the new work-flow. KW - biomedical MRI KW - data analysis KW - independent component analysis KW - medical image processing Y1 - 2019 U6 - https://doi.org/10.1109/EMBC.2019.8856355 SP - 194 EP - 197 PB - IEEE ER - TY - JOUR A1 - Lempert, Thomas A1 - Schott, Gisela A1 - Köbberling, Johannes A1 - Klemperer, David A1 - Lieb, Klaus T1 - Fortbildungen: Keine Punkte bei Sponsoring JF - Deutsches Ärzteblatt T2 - Continuing education: No credits in sponsoring Y1 - 2019 VL - 116 IS - 13 SP - A620 EP - A621 PB - Deutscher Ärzteverlag CY - Berlin ER - TY - JOUR A1 - Lindert, Jutta A1 - Wehrwein, Annette A1 - Klemperer, David A1 - Walter, U. T1 - Public health education in health-related study programs in Germany: Perspectives from course coordinators JF - Gesundheitswesen N2 - Hintergrund Inhalte von Public Health werden in Deutschland in gesundheitsbezogenen Studiengängen an Hochschulen und Universitäten gelehrt. Ziel dieser Studie war es, Daten zur Lehre und zur Kooperation von Lehrenden von Public Health in gesundheitsbezogenen Studiengängen in Deutschland zur Verfügung zu stellen. Methode Eine Querschnittsuntersuchung wurde online-basiert vom 01.06. bis 15.09.2015 an 93 Hochschulen/Universitäten in Deutschland mit 351 Studiengangsverantwortlichen aus gesundheitsbezogenen Studiengängen durchgeführt. Einbezogen wurden Public Health Studiengänge und gesundheitsbezogene Studiengänge, deren Hochschulen bzw. Universitäten entweder Mitglied in der "Deutschen Gesellschaft für Sozialmedizin und Prävention" (DGSMP) oder in der Gesellschaft "Hochschulen für Gesundheit" (HOGE) sind. Teilgenommen an dieser Studie haben N=104 Studiengangsverantwortliche (43% Männer, 57% Frauen). In Public Health Studiengängen wurden „Global Health" und "Umwelt und Gesundheit" als Studieninhalte häufiger als in gesundheitsbezogenen Studiengängen benannt; in gesundheitsbezogenen Studiengängen wurden häufiger "Ethik" und "Gesundheitspsychologie" als Lehrinhalte benannt. Finanzielle Unterstützungen durch die Hochschulen/ Universitäten sowie strukturierte Partnerschaften zwischen Hochschulen und/ oder Universitäten werden von Lehrenden an Hochschulen (36%) und an Universitäten (40%) gewünscht. Lehrende an Hochschulen wünschen darüber hinaus Promotionspartnerschaften. Schlussfolgerung Bisher gibt es in Deutschland keine einheitlichen fachlichen Qualitätskriterien für Absolvierende von Public Health bzw. gesundheitsbezogenen Studiengängen. Zudem gibt es nach Aussage der Studiengangsverantwortlichen dieser Studiengänge wenig Kooperation zwischen Lehrenden der Public Health bzw. der gesundheitsbezogenen Studiengänge. T2 - Lehre von Public Health in gesundheitsbezogenen Studiengängen in Deutschland: die Sicht von Studiengangsverantwortlichen KW - public hearlth KW - gesundheitsbezogene Studiengänge KW - Lehre Y1 - 2019 U6 - https://doi.org/10.1055/s-0043-116940 VL - 81 SP - 599 EP - 605 PB - Thieme ER - TY - CHAP A1 - Weber, Karsten ED - Draude, Claude ED - Lange, Martin ED - Sick, Bernhard T1 - Methoden der ethischen Evaluation von IT T2 - Informatik 2019 : 50 Jahre Gesellschaft für Informatik. Workshop-Beiträge. Fachtagung vom 23.-26. September 2019, Kassel N2 - ELSI-Begleitforschung entwickelt sich zunehmend zu einem integralen Bestandteil von Forschungs- und Entwicklungsprojekten – nicht zuletzt dadurch, dass Drittmittelgeber wie die EU oder das BMBF in vielen Förderlinien explizit fordern, dass Technik wertebasiert entwickelt bzw., responsible research and innovation‘ (RRI) betrieben wird. Leitend ist hierbei der Gedanke, dass die Gestaltung von Technik alle Stakeholder-Interessen berücksichtigen soll; die Ermittlung dieser Interessen sowie die moralisch fundierte Balance zwischen widerstreitenden Interessen soll durch partizipative Verfahren erreicht werden. Dazu eignen sich ethische Leitlinien oder andere Kodifizierungen von Normen und Werten nur bedingt; in der Praxis werden anwendbare Verfahren benötigt. In den letzten Jahren wurden solche Verfahren entwickelt und bereits in der F&E-Praxis erprobt und eingesetzt. Drei (diskursethisch basierte) Verfahren, die kombiniert werden können, sollen vorgestellt werden. Y1 - 2019 SN - 978-3-88579-689-3 U6 - https://doi.org/10.18420/inf2019_ws47 PB - Gesellschaft für Informatik CY - Bonn ER - TY - GEN A1 - Singh, Max Diamond T1 - Managing Innovation from the Notified Body Perspective - Understanding the 3 C’s of EU Regulations to Ensure Product Compliance: Changes, Challenges and Contributions T2 - 3rd annual european medical device and diagnostic product development and management meeting, 12-13 February 2019, Brussels Y1 - 2019 ER - TY - GEN A1 - Singh, Max Diamond T1 - Medical Device Regulation BT - Kurzer Überblick zur Zulassung von Medizinprodukten T2 - Forum MedTech Pharma: Start-ups in der Medizintechnik: Besonderheiten und Fallbeispiele, München, 17.7.2019 Y1 - 2019 ER - TY - JOUR A1 - Singh, Max Diamond T1 - Orthopedic Medical Devices Under The Scope of The EU MDR JF - MedTech Outlook Y1 - 2019 UR - https://embedded-solutions.medicaltechoutlook.com/cxoinsight/orthopedic-medical-devices-under-the-scope-of-the-eu-mdr-nwid-921.html ER - TY - JOUR A1 - Thema, Johannes A1 - Thema, Martin T1 - Nachnutzungskonzept: Braunkohle-Tagebaue als Pumpspeicherkraftwerk? JF - Energiewirtschaftliche Tagesfragen - et : Zeitschrift für Energiewirtschaft, Recht, Technik und Umwelt N2 - Der Anteil fluktuierender erneuerbarer Energien im deutschen Strommix steigt. Um die Netzstabilität zu erhalten, Fluktuationen im Dargebot nach Wetterlage und saisonal auszugleichen sind absehbar ab ca. 2030 große Stromspeicherkapazitäten erforderlich. Wasser-Pumpspeicherwerke sind derzeit die einzige langjährig erprobte Technologie, die künftig in Braunkohletagebauen, welche im Zuge der Energiewende aufgegeben werden, errichtet werden könnten. Eine Überschlagsrechnung am Beispiel eines Pumpspeicherwerks in verschiedenen Tagebauen zeigt, dass diese mit bis zu 400 GWh ein signifikantes technisches Speicherpotenzial haben. KW - Braunkohle KW - Energiewende KW - erneuerbare Energie KW - Pumpspeicherwerk KW - Speicherkapazität KW - Tagebau Y1 - 2019 VL - 69 IS - 4 SP - 38 EP - 39 PB - ETV Energieverl. CY - Essen ER - TY - CHAP A1 - Roesel, Birgit A1 - Schmidt, Nina T1 - Ein umfassendes Konzept für einen Grundkurs Regelungstechnik unter Verwendung aktivierender Lehrmethoden T2 - Tagungsband AALE 2019: autonome und intelligente Systeme in der Automatisierungstechnik, 16. Fachkonferenz, 28. Februar - 1. März 2019, Heilbronn N2 - Im Beitrag wird das Konzept für einen 6 SWS Grundkurs der Regelungstechnik an der Fakultät Elektro- und Informationstechnik der OTH Regensburg vorgestellt. Ein wesentliches Merkmal des Konzeptes ist die konsequente und durchgehende Anwendung der Idee des constructive alignment auch für die Konzipierung einer kompetenzorientierten Prüfung. Ausgangspunkt der Entwicklung des neuen Konzepts war die Definition von Lernzielen für das gesamte Modul, die dann für jede einzelne Lehrveranstaltung detailliert wurden. Im Ergebnis gibt es einen genauen Plan für die Abfolge der einzelnen Lehrveranstaltungen zur Theorievermittlung, der Übungen und der Praktika sowie der jeweils zu erreichenden Lernziele. Basierend auf der Definition von Lernzielen wurde ein Drittel der Lehrveranstaltungen zur Theorievermittlung mit einem Blended learning Ansatz konzipiert. Für diesen müssen die Studierenden vor der eigentlichen Lehrveranstaltung einen spezifischen Lehrtext lesen und Fragen dazu beantworten. Sie haben außerdem die Möglichkeit, selbst Fragen an die Dozentin zu stellen. Basierend auf diesem Rücklauf kann die Dozentin den Inhalt der Präsenzphase auf die jeweilige Studierendengruppe anpassen und dadurch spezifisch auf die Anforderungen dieser Gruppe reagieren. Durch diese Just-in-Time Teaching (JiTT) Methode oder auch inverted classroom Methode wird auch den unterschiedlichen Vorkenntnissen der Studierenden Rechnung getragen. Die übrigen Lehrveranstaltungen zur Theorievermittlung werden als klassische Lehrveranstaltungen durchgeführt. Auch in diesen werden aktivierende Lehrmethoden wie die Peer Instruction oder Clicker Befragungen eingesetzt. Peer Instruction stellt nach eine ideale Ergänzung zu JiTT dar. Die Übungseinheiten und Praktika dienen dem weiteren Kompetenzerwerb im Sinne der komplexeren Lernziele. Insbesondere die Praktika fokussieren jeweils auf einen spezifischen Effekt, der gezielt gefestigt werden soll. Zusätzlich wurde als weitere Innovation eine sogenannte Landkarte der Regelungstechnik – also eine Visualisierung der Themengebiete der Regelungstechnik – erstellt. Diese dient regelmäßig in den Lehrveranstaltungen zur Unterstützung zusammenfassender Darstellungen und soll außerdem den Studierenden helfen, mehr Überblick über die Themengebiete und ihren Zusammenhang zu geben. Zum Abschluss des Beitrags werden einige Erfahrungen aus der Umstellungsphase vorgestellt – Ergebnisse aus diversen Befragungen und Rückmeldungen wie auch Auswertungen von Fragebögen. KW - Elektrotechnik KW - Fakultät KW - Informationstechnik KW - Innovation KW - Just-in-Time KW - Landkarte KW - Praktikum KW - Rechnung KW - Regelungstechnik KW - Visualisierung Y1 - 2019 UR - https://www.vde-verlag.de/proceedings-de/564860040.html SN - 978-3-8007-4860-0 SP - 1 EP - 9 PB - VDE-Verlag CY - Berlin ER - TY - GEN A1 - Singh, Max Diamond T1 - EU-MDR from a Notified Body Perspective - aktuelle Situation hinsichtlich der Anforderungen zum Lieferantenmanagement BT - Tuttlingen, Technology Mountains / Medical Mountains, 2019 Y1 - 2019 ER -