TY - JOUR A1 - Görtler, Michael T1 - Zeit und Raum in der Europabildung JF - Lehren & Lernen N2 - Europa hat als Gegenstand der politischen Bildung in der Schule spürbar an Bedeutung gewonnen. Die Kategorien Zeit und Raum können für politisches Lernen im Kontext der Europabildung fruchtbar gemacht werden, weil sie den Schüler/innen einen erfahrungs- und lebensweltorientierten Zugang zu europapolitischen Fragestellungen ermöglichen. Im vorliegenden Beitrag werden zeit- und raumorientierte Ansätze aus Fachwissenschaft, Fachdidaktik und Europabildung diskutiert und unterrichtspraktische Zugänge reflektiert. KW - Didaktik KW - Europa KW - Europäische Erziehung KW - Politische Bildung KW - Raum KW - Zeit Y1 - 2022 SN - 0341-8294 VL - 48 IS - 3 SP - 18 EP - 22 PB - Neckar-Verlag CY - Villingen-Schwenningen ER - TY - JOUR A1 - Görtler, Michael T1 - Politik, Didaktik, Zeit: eine Analyse der Anschlussfähigkeit sozialwissenschaftlicher Zeitdiskurse an die Politikdidaktik JF - Zeitschrift für Didaktik der Gesellschaftswissenschaften KW - Didaktik KW - Didaktik der Gesellschaftswissenschaften KW - Gesellschaftswissenschaftn KW - Krise KW - Sinnbildung Y1 - 2022 UR - https://elibrary.utb.de/doi/10.46499/2079.2535 SN - 978-3-7344-1468-8 U6 - https://doi.org/10.46499/2079.2535 SN - 2749-487X SN - 2191-0766 VL - 13 IS - 2 PB - Wochenschau Verlag CY - Frankfurt/M. ER - TY - JOUR A1 - Görtler, Michael A1 - Schäfer, Stefan T1 - Soziale Arbeit als politisch-bildende Makropraxis: Theoretisch-konzeptionelle Überlegungen JF - Soziale Arbeit – Zeitschrift für soziale und sozialverwandte Gebiete N2 - Politische Bildung ist in letzter Zeit in den Fokus der Sozialen Arbeit gerückt. Die Analyse des Diskurses zeigt, dass der Anspruch des politischen und bildenden Handelns in Theorien und Konzepten der Sozia- len Arbeit erhoben wird, aber hinsichtlich des politisch-bildenden Handelns weiterhin Diskus- sionsbedarf besteht. Diesen Ansätzen folgend vertreten wir die These, dass Soziale Arbeit als politisch-bildende Makropraxis, die sich einer Demokratisierung der Demokratie verpflichtet sieht, verstanden werden kann. N2 - Political education has recently moved into the focus of social work. The analysis of the discourse shows that the claim of political and educational action is raised in theories and concepts of social work, but there is still a need for discussion with regard to political- educational action. Following these approaches, we support the thesis that social work can be understood as a political-educational macro practice, which sees itself committed to the democratization of democracy KW - Demokratie KW - Makroebene KW - Politische Bildung KW - Soziale Arbeit Y1 - 2022 U6 - https://doi.org/10.5771/0490-1606-2022-8-9-328 SN - 0490-1606 VL - 71 IS - 8-9 SP - 328 EP - 334 PB - Nomos CY - Baden Baden ER - TY - JOUR A1 - Görtler, Michael T1 - Das Planspiel als Methode der Europabildung im Kontext der Jugendarbeit JF - Blätter der Wohlfahrtspflege N2 - Die Bedeutung von Europa für junge Menschen nimmt seit der Gründung der Europäischen Union kontinuierlich zu. Das Planspiel als Methode der politischen Bildung stellt eine Möglichkeit dar, um das soziale und politische Lernen der Jugendlichen im Kontext europabezogener Fragestellungen zu fördern. KW - Bildung KW - Demokratie KW - Europa KW - Jugendarbeit KW - Methode KW - Planspiel KW - Politische Bildung KW - Sozialpolitik Y1 - 2022 U6 - https://doi.org/10.5771/0340-8574-2022-1-11 SN - 0340-8574 VL - 169 IS - 1 SP - 11 EP - 14 PB - Nomos CY - Baden Baden ER - TY - JOUR A1 - Görtler, Michael T1 - Politik unter Zeitdruck? Zur Beschleunigung der Gesetzgebung im Kontext der COVID-19-Pandemie JF - GWP – Gesellschaft. Wirtschaft. Politik N2 - Die COVID-19-Pandemie kann als zeitliche Herausforderung der Politik betrachtet werden. Eine beobachtbare Bewältigungsstrategie der Politik ist die Beschleunigung der Gesetzgebung. Dieser Mechanismus wird in Gesellschaft und Wissenschaft, aber auch der Politik selbst kontrovers diskutiert. Vor diesem Hintergrund werden in diesem Beitrag die Möglichkeiten einer Beschleunigung der Gesetzgebung sowie die beschleunigte Infektionsschutzgesetzgebung im Kontext der COVID-19-Pandemie als Beispiel diskutiert. KW - COVID-19-Pandemie KW - Gesetzgebung KW - Politik KW - Zeit Y1 - 2022 U6 - https://doi.org/10.3224/gwp.v71i3.06 VL - 71 IS - 3 SP - 311 EP - 322 PB - Budrich CY - Leverkusen ER - TY - THES A1 - Schmailzl, Anton ED - Franke, Jörg ED - Hanenkamp, Nico ED - Hausotte, Tino ED - Merklein, Marion ED - Müller, Sebastian ED - Schmidt, Michael ED - Wartzack, Sandro T1 - Festigkeits- und zeitoptimierte Prozessführung beim quasi-simultanen Laser-Durchstrahlschweißen N2 - Mit Blick auf Leichtbauanwendungen ist der Bedarf an thermoplastischen Strukturbauteilen sowohl in der Automobil- als auch in der Luftfahrtindustrie in den letzten Jahren deutlich angestiegen. Das quasi-simultane Laser-Durchstrahlschweißen ist ein etabliertes Kunststoffschweißverfahren, welches jedoch zur Herstellung von tragenden und sicherheitsrelevanten Bauteilen bislang kaum in Betracht gezogen wird. In der vorliegenden Arbeit wird die Korrelation zwischen dem Prozessablauf und der Schweißnahtfestigkeit beim quasi-simultanen Laser-Durchstrahlschweißen von Polyamid 6 (Ultramid B3s) erstmalig untersucht. Zur Prozessanalyse wird ein 3D-Scanner mit integriertem Pyrometer realisiert und für die Messaufgabe kalibriert. Es wird gezeigt, dass die detektierte Wärmestrahlung dem Kern der Schweißnaht zuzuordnen ist. Die Kerntemperatur in der quasi-stationären Prozessphase steht in direkter Korrelation mit der Schweißnahtfestigkeit. Mit steigender Kerntemperatur bzw. Molekülbeweglichkeit erhöht sich die Wahrscheinlichkeit der Bildung von Molekül-Verschlaufungen in der Fügeebene. Zur Ermittlung der Kerntemperatur ist sowohl die in dieser Arbeit entwickelte Temperaturmesstechnik als auch die realisierte numerische Prozesssimulation nutzbar. Die Erkenntnisse in dieser Arbeit sind für eine festigkeits- und zeitoptimierten Prozessführung des quasi-simultanen Laser-Durchstrahlschweißens nutzbar. N2 - The demand on thermoplastic components for lightweight constructions is continuously rising in the automotive as well as in the aerospace industry. The quasi-simultaneous laser transmission welding is an established joining technique in industry, but so far, it is usually not used for high strength applications as well as for safety-relevant components. This is caused by the lack of process understanding in case of producing high strength joints. Especially the temperature in the joining zone is a crucial process characteristic. Up to now, it was not measured in the needed precision. The quasi-simultaneous laser transmission welding of polyamide 6, especially the correlation between process characteristics and the joint strength is analyzed in this work. Therefore, a 3D-scanner with integrated pyrometer was realized and calibrated for the measurement task. It is shown, that the detected heat radiation is mainly coming from the core of the weld seam. The core temperature in the quasi-stationary process state is in direct correlation with the joint strength. The core temperature represents the mobility of the macromolecules in the polymer. An increased mobility leads to a better diffusion, relaxation or retardation of the macromolecules across the joining interface. A process window is defined on basis of the core temperature. The process setting which leads to a high joint strength as well as to the shortest irradiation time is found on the upper corner of the process window. The temperature can be measured with the needed precision by using the herein shown 3D-scanner with integrated pyrometer as well as by using the developed numerical process model. In conclusion, these tools for process diagnostics and the results of this work are useful for the production of welds with high joint strength and short welding times. KW - Laserschweißen KW - Kunststoffe KW - Prozessüberwachung KW - Laserscanner KW - Ingenieurwissenschaften KW - Maschinenbau KW - Produktionstechnik Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:29-opus4-207070 PB - FAU University Press CY - Erlangen ER - TY - RPRT A1 - Wolter, Jennifer A1 - Raptis, Georgios T1 - Leitfaden zur Anbindung einer Reha-Einrichtung an die Telematikinfrastruktur BT - Digitales Rehabilitationskonsil mit Anbindung an die Telematik-Infrastruktur (Reha-/TI-Konsil) N2 - Der Leitfaden beschreibt wie Rehabilitationseinrichtungen an die Telematik-Infrastruktur angebunden werden sollen. Y1 - 2022 U6 - https://doi.org/10.13140/RG.2.2.32767.07842 CY - Regensburg ER - TY - RPRT A1 - Rudolph, Clarissa T1 - "Der Wandel von MINT-Fachkulturen" BT - Handreichung zur Umsetzung von Geschlechtergerechtigkeit an Hochschulen KW - MINT-Fächer Y1 - 2022 UR - https://sozial-gesundheitswissenschaften.oth-regensburg.de/fileadmin/Bereiche/Fakultaet_S/Bilder_Forschung/Mint_Strategien4.0/MINT-Handreichung_Wandel_MINT_Fachkulturen_OTHR_2022.pdf SP - 1 EP - 18 CY - Regensburg ER - TY - RPRT A1 - Deglmann, Markus A1 - Ritthaler, Markus A1 - Raptis, Georgios T1 - Leitfaden für die Umsetzung des Reha-Konsils mittels HL7 FHIR BT - Projekt: Digitales Rehabilitationskonsil mit Anbindung an die Telematik-Infrastruktur N2 - Im Rahmen eines Forschungsprojektes soll eine Plattform für die Vermittlung von Telekonsilen und die Bereitstellung einer Konsilakte an die Telematik-Infrastruktur (TI) angeschlossen werden. Um sowohl eine bestmögliche Skalierbarkeit als auch eine optimale Integrierbarkeit in bestehende Systeme und Anwendungen zu erreichen, wurde HL7 FHIR als syntaktischer Standard für das Reha-Konsil festgelegt. Dieses Dokument liefert einen systematischen Überblick über die notwendigen Schritte und Voraussetzungen, um diesen Anschluss zu bewerkstelligen. Y1 - 2022 U6 - https://doi.org/10.13140/RG.2.2.25217.33120 ER - TY - CHAP A1 - Schaller, R. A1 - Maier, F. A1 - Mandl, Roland T1 - Thermally stimulated depolarization current - characterization of a multi-layer dielectric stack for semiconductor packages T2 - 2022 14th International Conference on Advanced Semiconductor Devices and Microsystems (ASDAM), 23-26 October 2022, Smolenice Castle, Slovakia N2 - In this paper, the results of Thermally Stimulated Depolarization Currents (TSDC)-measurements of a complex system of stacked dielectric layers, like typically appearing in semiconductor packages, is presented. Characteristics of the individual isolation layers are presented solely and the results are compared to the stack. The investigated layers are comprising polyimide film, alkali-free glass, polyolefin film and epoxy based mold compound. Measurements have been carried out in the temperature range from 19 - 195°C at varying polarization fields for every material. Various relaxation peaks, originated by different polarization mechanisms within the materials could be observed. A comparison between the TSDC-peaks of the layer stack and the individual materials is shown. Our results demonstrate, that the super positioned spectrum is getting dominated by a single portion, the mold compound. KW - Glass KW - Micromechanical devices KW - Polyimides KW - Semiconductor device measurement KW - Semiconductor devices KW - Temperature distribution KW - Temperature measurement Y1 - 2022 SN - 978-1-6654-6977-7 U6 - https://doi.org/10.1109/ASDAM55965.2022.9966799 SP - 1 EP - 5 PB - IEEE ER - TY - GEN A1 - Braun, Carina N. A1 - Wilson, Edith E. T1 - Berufswahl Professur an einer Hochschule für angewandte Wissenschaften BT - Forschungsstand und Forschungsagenda T2 - 17. Jahrestagung der Gesellschaft für Hochschulforschung, 14. bis 16. September 2022, Wien N2 - Der Vortrag präsentiert die heute vorliegenden, wissenschaftlichen Erkenntnisse zur Gewinnung und Entwicklung von Professor:innen an HAW. Darauf aufbauend wird eine Forschungsagenda abgeleitet, die u.a. Ansätze aus relevanten Literaturströmungen verknüpft. KW - HAW-Professur KW - Hochschule für angewandte Wissenschaften KW - Hochschulforschung KW - Fachhochschulen KW - Karriereforschung Y1 - 2022 ER - TY - JOUR A1 - Ng, Ming Shan A1 - Hall, Daniel A1 - Schmailzl, Marc A1 - Linner, Thomas A1 - Bock, Thomas T1 - Identifying enablers and relational ontology networks in design for digital fabrication JF - Automation in Construction N2 - As use of digital fabrication increases in architecture, engineering and construction, the industry seeks appropriate management and processes to enable the adoption during the design/planning phase. Many enablers have been identified across various studies; however, a comprehensive synthesis defining the enablers of design for digital fabrication does not yet exist. This work conducts a systematic literature review of 59 journal articles published in the past decade and identifies 140 enablers under eight categories: actors, resources, conditions, attributes, processes, artefacts, values and risks. The enablers' frequency network is illustrated using an adjacency matrix. Through the lens of actor-network theory, the work creates a relational ontology to demonstrate the linkages between different enablers. Three examples are presented using onion diagrams: circular construction focus, business model focus and digital twin in industrialisation focus. Finally, this work discusses the intersection of relational ontology with process modelling to design future digital fabrication work routines. KW - Digital fabrication KW - Enablers KW - Relational ontology network KW - Actor-Network Theory (ANT) KW - Process modelling Y1 - 2022 U6 - https://doi.org/10.1016/j.autcon.2022.104592 SN - 0926-5805 VL - 144 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Johannsen, Florian A1 - Zellner, Gregor A1 - Griesberger, Philipp T1 - Creating a Functional Interdependency Map for Supporting the “Act of Improvement” in Business Process Improvement Projects JF - International Journal of Service Science, Management, Engineering, and Technology (IJSSMET) N2 - Business process improvement (BPI) is of high priority for practitioners. But especially the most value-adding phase in a BPI project, namely the “act of improvement”, is insufficiently supported despite the many existing methods and techniques. Until now, it is largely unclear as to what degree existing BPI techniques support each other and are interrelated with one another. Thus, the purpose of this paper is to investigate the functional interdependencies between BPI techniques to get a better understanding for the beneficial synergies between the BPI techniques and to provide a basis for purposefully combining them within projects. Based on the functional interdependencies, a graphical “Functional Interdependency Map” is developed and its usability demonstrated in an experiment. The paper is valuable for academics and practitioners alike because the impact of BPI on organizational performance is high. KW - BPI Technique KW - Business Process KW - Case Study KW - Conceptual Model KW - Design Science KW - Experiment KW - Map KW - Metamodel Y1 - 2022 U6 - https://doi.org/10.4018/IJSSMET.295557 SN - 1947-959X VL - 13 IS - 1 PB - IGI Global ER - TY - CHAP A1 - Sykora, Miroslav A1 - Nadolski, Vitali A1 - Novak, Lukáš A1 - Novak, Drahomír A1 - Diamantidis, Dimitris T1 - Pilot comparison of semi-probabilistic methods applied to RC structures with multiple failure modes T2 - Concrete Innovation for Sustainability, 6th fib International Congress in Oslo, Norway (2022), proceedings, 12-16 June 2022, Oslo, Norway Y1 - 2022 SP - 1890 EP - 1899 PB - fib ER - TY - INPR A1 - Pangerl, Jonas A1 - Moser, Elisabeth A1 - Müller, Max A1 - Weigl, Stefan A1 - Jobst, Simon A1 - Rück, Thomas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A Highly Sensitive Acetone and Ethanol Quantum Cascade Laser Based Photoacoustic Sensor: Characterization and Multi-Component Spectra Recording in Synthetic Breath T2 - SSRN Electronic Journal N2 - Trace gas analysis in breath is challenging due to the vast number of different components. We present a highly sensitive quantum cascade laser based photoacoustic setup for breath analysis. Scanning the range between 8260 and 8270 nm with a spectral resolution of 48 pm, we are able to quantify acetone and ethanol within a typical breath matrix containing water and CO2. We photoacoustically acquired spectra within this region of mid-infra-red light and prove that those spectra do not suffer from non-spectral interferences. The purely additive behavior of a breath sample spectrum was verified by comparing it with the independently acquired single component spectra using Pearson and Spearman correlation coefficients. A previously presented simulation approach is improved and an error attribution study is presented. With a 3σ detection limit of 6.5 ppbV in terms of ethanol and 250 pptV regarding acetone, our system is among the best performing presented so far. KW - Photoacoustic spectroscopy KW - quantum cascade laser KW - spectral simulation KW - breath analysis KW - acetone Y1 - 2022 U6 - https://doi.org/10.2139/ssrn.4305376 PB - Elsevier ER - TY - GEN ED - Rickert, Alexa ED - Schlosser, Sophie T1 - Gestaltung, Funktion und Bedeutung antiker Treppenanlagen BT - Multiperspektivische Analyse einer transkulturellen Konstante N2 - Die vorliegende Publikation dokumentiert die Ergebnisse des Symposiums "Gestaltung, Funktion und Bedeutung antiker Treppenanlagen. Multiperspektivische Analyse einer transkulturellen Konstante", welches erstmals die Treppe und die Anfänge ihrer Reflexion in das Zentrum einer internationalen Fachtagung stellte. Diese fand im Rahmen der Symposienwochen der VolkswagenStiftung vom 20.–22. Oktober 2021 in Schloss Herrenhausen (Hannover) sowie im virtuellen Raum statt. Der Sammelband nähert sich einer kulturimmanenten wie transkulturellen Perspektive auf die Treppe an, indem Quellen unterschiedlicher Art und aus mehreren antiken Kulturräumen (Alter Orient, Ägypten, griechische Welt, Römisches Reich und Spätantike) untersucht werden. Das Studium des bauhistorischen Befundes wird so mit der Analyse von relevantem Bild- und Textmaterial kombiniert. Die jeweiligen Quellen zur Gestaltung, Funktion und Bedeutung der Treppenanlagen geben durch diese erweiterte Betrachtung Aufschluss darüber, welche Rolle jene für die Menschen in der Antike spielten. N2 - This publication documents the results of the symposium "Design, Function and Meaning of Ancient Staircases. Multi-perspective Analysis of a Transcultural Constant," which placed the staircase and the beginnings of its perception for the first time at the centre of an international conference. It took place as part of the Volkswagen Foundation's symposium weeks from October 20-22, 2021, at Herrenhausen Palace (Hanover), as well as in virtual space. The volume approaches a cultural-immanent as well as transcultural perspective on the staircase by examining sources of different kinds and from several cultural areas (Ancient Near East, Egypt, the Greek world, the Roman Empire, and Late Antiquity). The study of the architectural evidence is thus combined with the analysis of relevant pictorial and textual material. The respective sources on the design, function and meaning of ancient staircases provide information on their role for the people in antiquity. KW - Antike KW - Architektur KW - Treppe KW - Stufe KW - Scalalogie Y1 - 2022 SN - 978-3-96327-215-8 U6 - https://doi.org/10.17879/43059664331 N1 - Zugleich Print- und OA-Version PB - Zaphon CY - Münster ER - TY - CHAP A1 - Schlosser, Sophie ED - Rickert, Alexa ED - Schlosser, Sophie T1 - Steps on Steps BT - Scalalogical Reflections on Ancient Staircases T2 - Gestaltung, Funktion und Bedeutung antiker Treppenanlagen. Multiperspektivische Analyse einer transkulturellen Konstante KW - Antike KW - Architektur KW - Treppe KW - Stufe KW - Scalalogie Y1 - 2022 SN - 978-3-96327-215-8 U6 - https://doi.org/10.17879/43059664331 N1 - Zugleich Printpublikation und OA-Publikation SP - 23 EP - 46 PB - Zaphon CY - Münster ER - TY - JOUR A1 - Schächinger, J. A1 - Brückl, Oliver A1 - Becker, Mark A1 - Lechner, Raphael T1 - Results of the Research Project Optibiosy: Biogas plants as stabilizers of the power system? JF - BWK ENERGIE T2 - Biogasanlagen als Stabilisatoren des Stromsystems? Y1 - 2022 SN - 1436-4883 VL - 74 IS - 11-12 SP - 34 EP - 39 PB - VDI-Verlag CY - Düsseldorf ER - TY - JOUR A1 - Rösl, Gerhard A1 - Seitz, Franz T1 - Central Bank Digital Currency and Cash in the Euro Area: Current Developments and one Specific Proposal JF - Credit and Capital Markets – Kredit und Kapital N2 - The present paper provides an overview on current developments of cash usage and issue of central bank digital currency (CBDC) in the euro area and proposes a possible design of a digital euro that allows for instant offline payments. Cash usage at the point-of-sale decreased perceptibly in the past years mainly due to the ongoing trend towards digitalization. However, we show that there are also indications that consumers were somewhat pushed into cashless payments by government regulations and supply-side restrictions by commercial banks. Nonetheless, overall demand for euro cash remained strong and even increased relative to GDP since the financial crisis in 2008. In this process, however, we observe a supply-driven shift towards lower banknote denominations. Central banks all over the world are intensively thinking about the potential issue of ­CBDC as a substitute or complement to cash. Based on some of its preferred characteristics, we propose a double pre-paid scheme combining central elements of TARGET Instant Payment Settlement and electronic money features enabling offline and online instant payments. Since anonymity is categorically discarded by the ECB and as cash has some special advantages from a consumer perspective, the digital euro will rather co-circulate with cash than replace it in transactions. Y1 - 2022 U6 - https://doi.org/10.3790/ccm.55.4.523 VL - 55 IS - 4 SP - 523 EP - 551 PB - Duncker & Humblot CY - Berlin ER - TY - CHAP A1 - Görtler, Michael A1 - Taube, Gabriele A1 - Thielemann, Nurdin ED - Görtler, Michael ED - Taube, Gabriele ED - Thielemann, Nurdin T1 - Soziale Arbeit und Professionalität: Klärungsbedarfe zwischen Theorie, Lehre und Praxis. Zur Einleitung T2 - Soziale Arbeit und Professionalität: Reflexionen zwischen Theorie, Praxis und Lehre Y1 - 2022 SN - 978-3-8474-2573-1 SP - 9 EP - 14 PB - Verlag Barbara Budrich CY - Leverkusen ER - TY - CHAP A1 - Süzeroglu-Melchiors, Sevim A1 - Hammans, Philipp ED - Puutio, Alexander T1 - Think Entrepreneurial: A Business-Driven Approach for IP Asset Valuation T2 - Practical Guide to Successful Intellectual Property Valuation and Transactions Y1 - 2022 SN - 9789041194480 SP - 217 EP - 232 PB - Wolters Kluwer ER - TY - GEN A1 - Braun, Carina N. T1 - Der Mensch im Digitalisierungsprozess T2 - Fachtagung Leadership 4.0 und digitale Transformation, 10. November 2022, Hochschule Bremen N2 - Was treibt unternehmerische Entscheidungen und was wird übersehen? Welche Anforderungen gilt es zu bewältigen – und ist das überhaupt machbar? Wo können wir ansetzen, damit die digitale Transformation gelingt? KW - Digitalisierung KW - Personalmanagement KW - Leadership KW - Transformation Y1 - 2022 ER - TY - JOUR A1 - Braun, Carina N. A1 - Voußem, Ludwig T1 - „Boomerang Students“: Rückgewinnung ehemaliger Praktikanten und Auszubildender JF - PERSONAL quarterly N2 - Wie können Unternehmen die Bindung, Rückkehrintention und Weiterempfehlungsbereitschaft ehemaliger Praktikant:innen und Auszubildender positiv beeinflussen? Mithilfe eines Onlinefragebogens wurden hierfür Studierende befragt. Die Ergebnisse geben Hinweise, welche Bindungsmaßnahmen Unternehmen nutzen können, um den Kontakt zu ehemaligen Praktikant:innen und Auszubildenden zu halten und durch ein verbleibendes Commitment eine höhere Rückkehrintention und Weiterempfehlungsbereitschaft zu erreichen. KW - Ausbildung KW - Personalmanagement KW - Bindung KW - Talent Relationship Management KW - Commitment Y1 - 2022 IS - 3 PB - Haufe-Lexware ER - TY - GEN A1 - Braun, Carina N. T1 - Future Work und Future Skills BT - Was brauchen und was wünschen sich die Talente von morgen? T2 - TRIOKON 2022. Progressive Provinz - Mutige Menschen und zukunftsweisende Projekte in Ostbayern, 22.09.2022, Passau N2 - Welche Fähigkeiten brauchen die Talente von morgen? Aber welche Arbeitswelten erwarten sie gleichzeitig? Was können die Unternehmen tun, um die Talente für die Zukunft zu sichern? Der Vortrag berichtet von aktuellen Forschungsergebnissen und bietet gute Ansätze für den Transfer in die Praxis. KW - Personalgewinnung KW - New Work KW - Arbeitswelt KW - Berufliche Qualifikation KW - Personalbindung KW - Arbeitskultur Y1 - 2022 ER - TY - GEN ED - Herrmann, Frank T1 - SIMUL 2022 : the Fourteenth International Conference on Advances in System Simulation : October 16-20, 2022, Lisbon, Portugal Y1 - 2022 UR - https://www.thinkmind.org/download_full.php?instance=SIMUL+2022 SN - 978-1-68558-001-8 PB - IARIA ER - TY - CHAP A1 - Gersch, Sebastian A1 - Schulz, Carsten T1 - Realpotential von Eigenspannungen zur Erhöhung der Bauteillebensdauer bei generativ gefertigten, dynamisch beanspruchten Bauteilen T2 - Dresdner Maschinenelemente Kolloquium - DMK 2022, 26.-27. April / Technische Universität Dresden Y1 - 2022 SN - 978-3-96548-135-0 SN - 3-96548-135-5 SP - 496 EP - 505 PB - sierke Verlag CY - Göttingen ER - TY - JOUR A1 - Schneider, Andreas A1 - Schroll-Decker, Irmgard T1 - Nachhaltigkeit als Kriterium zur Personalrekrutierung? BT - Eine Bestandsaufnahme zur Verwendung in Stellenanzeigen aus der IT- und der Sozialbranche JF - Blätter der Wohlfahrtspflege N2 - Es werden Stellenanzeigen der Sozial- und der IT-Branche daraufhin untersucht, inwieweit sie Aspekte von Nachhaltigkeit enthalten. KW - Nachhaltigkeit Y1 - 2022 VL - 169 IS - 1 SP - 24 EP - 27 PB - Nomos Verlag CY - Baden-Baden ER - TY - RPRT A1 - Steffens, Oliver T1 - A Perpetual Calendar Slide Rule N2 - We present a method and demonstrate the construction of an analog (mechanical/graphical) perpetual calendar device for the Gregorian calendar system. It allows to calculate the weekdays of a day in any year (and vice versa). KW - Slide Rule KW - Perpetual Calendar KW - Gregorian calendar KW - Analog Computing Devices Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58935 ER - TY - CHAP A1 - Galka, Stefan A1 - Schuhegger, Lukas ED - Feng, B. ED - Pedrielli, G. ED - Peng, Y. ED - Shashaani, S. ED - Song, E. ED - Corlu, C.G. ED - Lee, L.H. ED - Chew, E.P. ED - Roeder, T. ED - Lendermann, P. T1 - Integration of Discrete-event Simulation in the Planning of a Hydrogen Electrolyzer Production Facility T2 - Proceedings of the 2022 Winter Simulation Conference (WSC), 11-14 Dec. 2022, Singapore N2 - In the context of production and factory planning, the expansion of the factory must already be taken into account during initial planning. This results in an increase in planning complexity, as the involved planners have to know the expansion stages of the factory in the different time periods and have to evaluate concept modifications across all time periods. This paper presents an idea for a planning tool, which takes expansion stages into consideration. The data model contains all relevant information to generate a simulation model of the factory in an almost automated way. The aim is to enable factory planners to quickly investigate concept changes with the help of simulation, for example, to identify bottlenecks. KW - Simulation KW - Production KW - Digital Twin Y1 - 2022 UR - https://informs-sim.org/wsc22papers/pos114.pdf PB - IEEE CY - Singapore ER - TY - GEN A1 - Wild, Tobias A1 - Galka, Stefan A1 - Wappler, Mona A1 - Xing, Lu ED - Potter, A. ED - Pawar, K. S. ED - O’Reilly, S. ED - Jimo, A. T1 - Integrating supply chain aspects into factory planning, a simulation approach T2 - The journey to sustainable supply chains: proceedings of the 26th International Symposium on Logistics (ISL 2022), 10-13th July 2022, Cork, Ireland N2 - One major goal of green-field factory planning is to decide on space requirements in the plant. In this phase, detailed information about the supply chain network (e.g. which suppliers deliver which parts) is often unavailable. Nevertheless, typical decisions in supply chain management, like the definition of replenishment processes and quantities or make-or-buy decisions, impact space requirements in the factory and should therefore be considered in the factory planning. This research article proposes a simulation approach for a factory simulation in which raw material replenishment is integrated to evaluate the space requirements for raw materials. KW - factory planning KW - supply chain management KW - replenishment strategies KW - space requirements KW - discrete event simulation Y1 - 2022 UR - https://isl21.org/wp-content/uploads/2022/07/ISL_2022_Proceedings.pdf SN - 978-0-85358-350-9 PB - Nottingham University Business School, UK CY - Nottingham, UK ER - TY - CHAP A1 - Haimerl, Simon A1 - Tschernitz, Christoph A1 - Schiller, Tobias A1 - Weig, Christoph A1 - Briem, Ulrich A1 - Galka, Stefan T1 - Development of a Simulation Framework for Urban Ropeway Systems and Analysis of the Planned Ropeway Network in Regensburg, Germany T2 - Proceedings of the 2022 Winter Simulation Conference (WSC), 11-14 Dec. 2022, Singapore N2 - To evaluate the performance of a ropeway in an urban environment, simulations of the dynamic passenger transport characteristics are required. Therefore, a modular simulation model for urban ropeway networks was developed, which can be flexibly adapted to any city and passenger volume. This simulation model was used to analyze the ropeway network concept of the German city Regensburg and to determine the expected operating conditions. The passenger volume, different types of persons, their occurrence probability and their destination distribution is depending on the location and daytime and can be defined for each individual station. In an initial analysis, the number of passengers currently occurring in bus traffic were projected onto the ropeway network. To enable climate-friendly and efficient operation, different strategies were developed to significantly reduce the number of gondolas. The best fitting strategies resulted in significant cost savings while passenger comfort, as represented by queue time, remained unchanged. KW - Simulation KW - urban mobility KW - ropeway Y1 - 2022 SN - 978-1-6654-7661-4 U6 - https://doi.org/10.1109/WSC57314.2022.10015510 SP - 1413 EP - 1424 PB - IEEE ER - TY - CHAP A1 - Schmid, Florian A1 - Wild, Tobias A1 - Schneidewind, Jan A1 - Vogl, Tobias A1 - Schuhegger, Lukas A1 - Galka, Stefan T1 - Simulation Based Approach for Reconfiguration and Ramp up Scenario Analysis in Factory Planning T2 - Proceedings of the 2022 Winter Simulation Conference (WSG), 11-14 Dec. 2022, Singapore N2 - Structural changes in production entail a potential economic risk for manufacturing companies. It is necessary to identify a suitable strategy for the reconfiguration process and to continue to meet the demand during the change in the factory structure and ramp-up phase. A simulation offers the possibility to analyze different ramp-up scenarios for the factory structure and to select a suitable concept for the reconfiguration process. A discrete event simulation approach is presented that can be used to evaluate variants of structural changes and serves as a basis for deciding on a reconfiguration strategy. This approach is demonstrated using a specific production step of a plant producing hydrogen electrolyzers, the results and generalized conclusions are discussed. KW - Simulation KW - Production KW - Ramp up Y1 - 2022 SN - 978-1-6654-7661-4 U6 - https://doi.org/10.1109/WSC57314.2022.10015310 SP - 2842 EP - 2852 PB - IEEE ER - TY - CHAP A1 - Fuhrmann, Thomas T1 - Course Preparation Time Optimization System for Improved Didactic Outcome T2 - 2022 20th International Conference on Information Technology Based Higher Education and Training (ITHET), 07-09 November 2022, Antalya, Turkey N2 - Due to the various demands for lecturers, there is only a limited time to prepare lectures and lab courses. Therefore, it is necessary to invest the time target-oriented for optimal student learning success. A theoretic model is developed to structure course preparation work regarding scientific content, didactic preparation, and course presentation. Model parameters have to be chosen for each course depending on topic complexity, the lecturer’s prior knowledge, and the already available preparation from the prior semesters. With these parameters, a course preparation model for a complete semester is developed. Analytic models for different optimization strategies are introduced according to the overall goal of the lecturer. Numerical optimization is done to find the appropriate course preparation times to reach an optimal course preparation for high student learning success. It is seen that due to the different optimization strategies, the preparation time results vary and no single truth is given. But this optimization system gives hints on how to invest preparation time target-oriented for high student learning success. KW - Higher education KW - Engineering education KW - Course preparation KW - Curriculum development KW - Optimization Y1 - 2022 SN - 978-1-6654-8908-9 U6 - https://doi.org/10.1109/ITHET56107.2022.10031642 PB - IEEE ER - TY - GEN A1 - Kögler, Michael A1 - Ismail, Khaled M. A1 - Rusavy, Zdenek A1 - Kalis, Vladimir A1 - Süß, Franz A1 - Dendorfer, Sebastian T1 - Influence of bed height and stance on accoucheurs lower back and glenohumeral load during simulated childbirth T2 - 31st meeting of Czech Urogynaecological Society, Prague, 2022 Y1 - 2022 ER - TY - JOUR A1 - Dendorfer, Sebastian A1 - Melzner, Maximilian T1 - Rückenschmerzen bei Geburtshelfer:innen. Die Haltung macht's. JF - Deutsche Hebammen-Zeitschrift N2 - Für Mutter und Kind konnte das Risiko der Geburt durch die Weiterentwicklung der Medizin drastisch reduziert werden. Doch wie ist es um das Wohl derer bestellt, die die Gebärende unterstützen? Eine Studie der Ostbayerischen Technischen Hochschule Regensburg hat sich mit den muskuloskelettalen Beschwerden von Geburtshelfer:innen auseinandergesetzt Y1 - 2022 UR - https://ip.staudeverlag.de/de/profiles/c3962f735915-elwin-staude-verlag-kiosk-bc/editions/dhz-11-2022/pages/page/32 SN - 0012-026X VL - 74 IS - 11 SP - 60 EP - 62 PB - Staude CY - Hannover ER - TY - JOUR A1 - Heese, Carl T1 - Rezension vom 03.03.2022 zu: Timm H. Lohse, Christoph Schneider-Harpprecht: Das Kurzgespräch in Seelsorge und Beratung. Eine methodische Anleitung. Vandenhoeck & Ruprecht (Göttingen) 2020. 5., überarbeitete Aufl. JF - socialnet Y1 - 2022 UR - https://www.socialnet.de/rezensionen/29037.php ER - TY - JOUR A1 - Heese, Carl T1 - Rezension vom 11.01.2022 zu Hampe, Ruth u.a.: Heilpädagogische Kunsttherapie. Grundlagen, Methoden, Anwendungsfelder. Verlag W. Kohlhammer (Stuttgart) 2020 JF - socialnet Y1 - 2022 UR - https://www.socialnet.de/rezensionen/28976.php ER - TY - JOUR A1 - Heese, Carl T1 - Rezension vom 01.07.2022 zu : Kirstin Kieselbach, Stefan Wirz, Michael Schenk (Hrsg.): Multimodale Schmerztherapie. Ein Praxislehrbuch. Verlag W. Kohlhammer (Stuttgart) 2021 JF - socialnet Y1 - 2022 UR - https://www.socialnet.de/rezensionen/28094.php ER - TY - CHAP A1 - Heese, Carl ED - Schöpf, Nicolas T1 - Soziale Arbeit als Weiterbildungsziel: Zur Professions- und Karriereentwicklung in der Heilpädagogik T2 - Akademische Weiterbildung für soziale Berufe: Theoretische, empirische und praktische Aspekte N2 - Die Akademisierung hat für die Mitarbeiter:innen der Heilpädagogik ebenso neue Optionen geschaffen wie für die der Pflege und die der Einrichtungen der Frühen Bildung. Dabei führt der berufliche Bildungsweg in der Heilpädagogik aber häufig nicht aus der Heilerziehungspflege zum Studium der Heilpädagogik oder der entsprechenden Lehramtsstudiengänge, sondern zur Sozialen Arbeit. Der Beitrag geht diesem Sachverhalt mit Überlegungen zur Strukturentwicklung in der beruflichen und akademischen Ausbildung nach. Das Studium der Sozialen Arbeit im Anschluss an eine Ausbildung in der Heilerziehungspflege erscheint demnach als stimmige Fortführung. Für sie spricht neben pragmatischen Vorteilen eine breite Überschneidung der beiden Disziplinen im Bereich der Behindertenhilfe, die historisch mit der heilpädagogischen Abteilung der Kinderklinik des Universitätskrankenhauses Wien schon einmal eine Gestalt gewonnen hatte, bei der sogar von einer Identität im Programm und der institutionellen Umsetzung der beiden Disziplinen gesprochen werden kann. Y1 - 2022 UR - https://directory.doabooks.org/handle/20.500.12854/92462 SN - 3763966463 SP - 55 EP - 64 PB - wbv CY - Bielefeld ER - TY - CHAP A1 - Schweiberer, Philipp A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Entwicklung eines Regelkonzeptes für einen optimierten Blindleistungsabruf auf Basis von Blindleistungspotentialanalysen bei Industriebetrieben im Mittelspannungsnetz T2 - Tagungsband Tagung Zukünftige Stromnetze 26./27. Januar 2022 (online) N2 - Im Zuge der Energiewende ergibt sich ein Wandel in der Struktur des Elektrizitätsversorgungsnetzes. Die Verschiebung der Erzeugungsleistung von konventionellen Großkraftwerken in höheren Netzebenen hin zu dezentralen erneuerbaren Energieanlagen in niedrigeren Netzebenen resultiert sowohl in bidirektionalen Lastflüssen als auch in schwankenden Einspeisecharakteristiken. Des Weiteren folgen durch den Wegfall von Großkraftwerken als Blindleistungsquellen Leistungsdefizite in der Übertragungsnetzebene, die kompensiert werden müssen. Daraus resultieren Herausforderungen an einen sicheren und zuverlässigen Betrieb der Verteil- und Übertragungsnetze. Neue Konzepte müssen für die Erbringung von Blindleistung entwickelt werden, es soll mehr Blindleistung aus dem Verteilungsnetz zur Verfügung gestellt werden, um die Systemstabilität zu wahren. Im Rahmen des Projektes Q-Integral wird das Thema „Blindleistung“ (Q) ganzheitlich untersucht. Es werden dazu verschiedene Erbringungsoptionen für Blindleistung hinsichtlich technischer und wirtschaftlicher Potentiale untersucht, die in ein funktionales und effizientes Blindleistungsmanagement eingebracht werden. Die Untersuchungsansätze dafür sind sowohl spannungsebenen-übergreifend als auch netzbetreiber-übergreifend. Ein Ansatzpunkt des Projektes ist die Betrachtung der Blindleistungsbereitstellung von Industriebetrieben. Dazu wird das Potential von Betrieben, die an das Verteilnetz angeschlossen sind und Blindleistung durch Kompensations- oder Erzeugungsanlagen bereitstellen können, untersucht. Ziel ist es, das gesicherte und maximale induktive sowie kapazitive Potential zu bestimmen. Das gesicherte kapazitive Potential kann genutzt werden, um Aussagen darüber zu treffen, wie stark dem Spannungsfall im vorgelagerten Netz zu Starklastzeiten entgegengewirkt werden kann. Anhand des gesicherten induktiven Potentials kann ein Spannungsanstieg während Schwachlastzeiten ausgeglichen werden kann. In diesem Beitrag werden Ergebnisse aus dem Projekt Q-Integral vorgestellt. Dazu werden zuerst die Berechnungsgrundlagen der induktiven und kapazitiven Blindleistungspotentiale aufgezeigt und die Ergebnisse der Berechnungen vorgestellt. Die gewonnen Ergebnisse entstammen aus Messungen an einem Industriebetrieb mit Blindleistungskompensationsanlagen (BKA), den entsprechenden Reglern der Anlagen und einer installierten Kompensationsleistung von 1600 kvar. Sowohl die Lastgänge als auch das Schaltverhalten der einzelnen Kompensationsanlagen liegen den Berechnungen zugrunde. Um den Austausch der Blindleistung an der Übergabestelle des Betriebs zum Mittelspannungsnetz netzdienlich einzustellen, bedarf es eines geeigneten Regelkonzepts, das neben den BKAs auch weitere Q-Quellen berücksichtigt. Deshalb wird abschließend ein Regelkonzept vorgestellt, das den technisch-optimierten Blindleistungsabruf unter Berücksichtigung mehrerer Blindleistungsquellen behandelt. KW - Blindleistung KW - Blindleistungsmanagement KW - Blindleistungsquellen KW - Blindleistungspotentiale KW - Industriebetriebe Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58704 SN - 978-3-948176-16-7 SP - 224 EP - 233 PB - Conexio-PSE GmbH CY - Pforzheim ER - TY - CHAP A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Konzeptionierung netzplanerischer Prozessansätze zur Ermittlung von Blindleistungskapazitäten zum Ausgleich des Blindleistungsbedarfs in einer Netzregion T2 - Tagungsband Tagung Zukünftige Stromnetze 26./27. Januar 2022 (online) N2 - Um einen sicheren und zuverlässigen Stromnetzbetrieb zu gewährleisten, muss die Spannung im Grundfall als auch bei ungeplanten Ausfällen in definierten Bereichen gehalten werden. Im Übertragungsnetz wird hierfür bisher Blindleistung hauptsächlich aus Blindleistungskompensationsanlagen und konventionellen Großkraftwerken eingesetzt. Zukünftig wird nach §12h EnWG eine marktgestützte Beschaffung dieser Dienstleistung zur Spannungsregelung vorgeschrieben. Zugleich verändert sich der Blindleistungsbedarf der Netzbetriebsmittel durch die Integration erneuerbarer Energieanlagen und der Elektromobilität sowie durch den Netzausbau bei Übertragungs- und Verteilungsnetzbetreibern. Es bedarf somit angepasster Netzbetriebs- und Netzplanungskonzepte für ein technisch effizientes und wirtschaftlich günstiges Blindleistungsmanagement. Dieser Beitrag beschäftigt sich damit, Prozessansätze und Methodiken für ebendieses in der Netzplanung aufzuzeigen, um erforderliche Blindleistungskapazitäten unter minimalen Gesamtkostenaufwand und unter Berücksichtigung einer effizienten Blindleistungsbedarfsdeckung zu bestimmen. Dabei liegt der Fokus verstärkt in der Bedarfsanalyse. KW - Blindleistung KW - Blindleistungsmanagement KW - Netzplanungsprozesse KW - Spannungshaltung KW - Optimierungsverfahren Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58665 SN - 978-3-948176-16-7 SP - 117 EP - 126 PB - Conexio-PSE GmbH CY - Pforzheim ER - TY - CHAP A1 - Schweiberer, Philipp A1 - Rauch, Johannes A1 - Brückl, Oliver ED - Schulz, Detlef T1 - Long-term analysis of industrial reactive power potentials with consideration of plant-internal grid restrictions using the example of an industrial plant in a distribution grid T2 - NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg N2 - Since conventional generation plants provide a considerable share of reactive power but are gradually being shut down due to energy transition, leading to power deficits at the transmission grid level, new concepts for the supply of reactive power must be developed. As one possibility for the latter, industrial plants in the distribution grid are considered suitable, as their reactive power potentials can contribute to voltage maintenance and thus to a grid- or system-serving behavior. In this paper, the determination of reactive power potentials provided by industrial compensation systems (ICS) is presented. An industrial plant in the medium voltage grid, with three installed ICSs, is investigated. The potentials are determined and described based on their time characteristics, which provide information about the occurrence and distribution of inductive and capacitive potentials. A grid simulation of the investigated industrial grid is used to analyze the effects of retrieving the reactive power potentials regarding equipment utilizations and voltage limits. KW - Reactive Power KW - Reactive Power Potentials KW - Industrial plant KW - Voltage Stability KW - Long term analysis Y1 - 2022 UR - https://ieeexplore.ieee.org/document/10048065 SN - 978-3-8007-5983-5 SN - 2510-6902 SP - 51 EP - 56 PB - VDE-Verlag CY - Berlin ER - TY - CHAP A1 - Rauch, Johannes A1 - Brückl, Oliver A1 - Engel, Bernd ED - Schulz, Detlef T1 - Analysis and optimization of the steady state voltage deviation demand for reactive power planning using installed reactive power sources T2 - NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg N2 - The provision of reactive power is one option for maintaining the grid voltage, that is defined as an ancillary service in Germany. This paper presents an approach for determining deficient voltage deviation demands within an electrical grid for long term reactive power planning investigations. In contrast to previous approaches, which evaluate the Q-behavior of extended ward elements or grid assets, voltage deviations are analyzed bus-specifically. So further reactive power planning investigations are able to scale and optimize additional reactive power sources directly on planning voltage limits using load flow sensitivity techniques. The focus lies on the analysis of the steady state demand at base case conditions. Therefore, a grid planning process is conceptualized. An optimal power flow algorithm based on Differential Evolution is used for an optimal reactive power dispatch of installed reactive power sources, e. g. reactive power compensation systems or (renewable) energy sources to minimize the total voltage deviation according to voltage limits of Transmission System Operators planning principles. Methodological and processuals specifications as well as an application use case with an exemplary transmission system are presented in this paper. KW - Reactive Power KW - Reactiver Power Planning KW - Voltage Control KW - Optimal Power Flow KW - Differential Evolution Y1 - 2022 UR - https://ieeexplore.ieee.org/document/10048083 SN - 978-3-8007-5983-5 SN - 2510-6902 SP - 175 EP - 182 PB - VDE-Verlag CY - Berlin ER - TY - JOUR A1 - Heese, Carl T1 - Der Fachkräftemangel in der Kinder- und Jugendhilfe aus der Sicht der akademischen Fachbereiche JF - Eev-aktuell KW - Soziale Arbeit KW - Qualifikation KW - Fachkraft KW - Soziale Arbeit Y1 - 2022 UR - https://www.eev-bayern.de/fileadmin/user_upload/EEV-Bayern/Redakteure/FA_%C3%96ffentlichkeitsarbeit_und_Medien/2022/eev_aktuell_2022-02_Homepage.pdf VL - 40 IS - 2 SP - 12 EP - 13 PB - Eev, Evangelischer Erziehungsverband in Bayern e.V. CY - Nürnberg ER - TY - JOUR A1 - Kraus, Michael A. A1 - Lammel, Laura A1 - Obergrießer, Mathias T1 - Digitale Transformation und Künstliche Intelligenz - Herausforderungen und Lösungsansätze bei der Kombination von Theorie und Praxis JF - Ingenieurbaukunst ... made in Germany Y1 - 2022 SN - 978-3-433-03359-3 SP - 168 EP - 173 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Obergrießer, Mathias A1 - Kraus, Michael A. ED - Schermer, Detleff ED - Brehm, Eric T1 - Digitale Transformation im Bauwesen – Von der Theorie zur Anwendung T2 - Mauerwerk-Kalender 2022: Fassadengestaltung, Bauphysik, Innovationen N2 - Dieser Beitrag führt zunächst in die digitale Transformation (DT) des Bauwesens und deren wesentliche Methoden wie BIM, digitaler Zwilling etc. ein. Zur Erzielung eines begriff‌lichen und semantischen Verständnisses werden die Definitionen zudem an Anwendungsbeispielen veranschaulicht. Neben den Gründen für die DT werden der Status quo sowie der Weg vom analogen Planen und Bauen zur Vision „Planen und Bauen~4.0“ dargestellt. Kernelemente sind verschiedene Ansatzpunkte, Entscheidungshilfen und Schlüsse zur Begegnung der technischen und adaptiven Herausforderungen der DT auf Unternehmer‑, aber auch Hochschulniveau. Insbesondere der Faktor Mensch und dessen humane wie technische Kollaborations- und Vernetzungsfähigkeit wird in diesem Beitrag Rechnung getragen. Abschließend wird neben einer Zusammenfassung der dargestellten Inhalte zudem ein Ausblick für die DT im Bauwesen bis hin zum Einsatz von Robotik und KI für den im nächsten Jahr erscheinenden zweiten Teil dieses Beitrags gegeben. Y1 - 2022 SN - 978-3-433-03356-2 U6 - https://doi.org/10.1002/9783433611029.ch16 VL - 47 SP - 499 EP - 519 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Biewer, Gottfried A1 - Schütz, Sandra ED - Hedderich, Ingeborg ED - Biewer, Gottfried ED - Hollenweger, Judith ED - Markowetz, Reinhard T1 - Inklusion T2 - Handbuch Inklusion und Sonderpädagogik Y1 - 2022 SN - 978-3-8385-8804-9 U6 - https://doi.org/10.36198/9783838588049 SP - 126 EP - 129 PB - Klinkhardt CY - Bad Heilbrunn ET - 2., aktualisierte und erweiterte Auflage ER - TY - CHAP A1 - Schöpf, Nicolas A1 - Schütz, Sandra ED - Schöpf, Nicolas T1 - „Kommt uns zugute und dir kommt es ja auch zugute“ – Strategien der betrieblichen Unterstützung berufsbegleitend Studierender. Ergebnisse einer qualitativen Studie in der Sozialwirtschaft T2 - Akademische Weiterbildung für soziale Berufe N2 - Das Ziel des vorliegenden Beitrags ist es, die Perspektive der Arbeitgeber:innen auf Unterstützung für ein berufsbegleitendes Studium vorzustellen. Dazu wurden Formen, Kriterien, formale Regelungen und Grenzen einer solchen Unterstützung explorativ untersucht. Im Rahmen eines qualitativen Projekts wurden neun leitfadengestützte Interviews mit Personalverantwortlichen aus acht Trägern und Unternehmen der Sozialwirtschaft geführt und mittels qualitativer Inhaltsanalyse ausgewertet. Die Ergebnisse zeigen eine große Spannbreite und Vielfalt an Unterstützungsmöglichkeiten für die Studierenden, die über eine rein materielle Förderung deutlich hinausgehen. Die Auswahl- und Förderprozesse sowie die formalen Regelungen gestalten sich in der Praxis zum Teil sehr unterschiedlich und lassen zwei Strategien erkennen: ein standardisiertes vs. individualisiertes Vorgehen. Bei den Herausforderungen und Grenzen einer Unterstützung berichten die Arbeitgeber:innen über ähnliche Limitationen. Bedeutsam für alle befragten Arbeitgeber:innen ist, dass ein Benefit des berufsbegleitenden Studiums für beide Seiten entsteht – für die Arbeitnehmer:innen und für die Arbeitgeber:innen. KW - Berufsbegleitendes Studium KW - Soziale Arbeit KW - Arbeitgeber:innenperspektive KW - Unterstützungsleistungen KW - formale Regelungen KW - Weiterbildungsförderung KW - Weiterbildungsfinanzierung KW - Personalentwicklung Y1 - 2022 UR - https://directory.doabooks.org/handle/20.500.12854/92462 SP - 123 EP - 154 PB - wbv CY - Bielefeld ER - TY - JOUR A1 - Heidl, Christian A1 - Schmidt, Christiane A1 - Darlapp, Lisa A1 - Richter, Stefanie A1 - Zerth, Jürgen T1 - Entwicklung demenzsensibler Strukturen in der Stadt am Beispiel Fürth JF - ProAlter KW - Demenz KW - Gerontologie KW - Strukturentwicklung KW - Alter KW - Demenznetzwerk KW - demenzfreundliche Kommune Y1 - 2022 SN - 1430-1911 VL - 54 IS - 2 SP - 40 EP - 42 PB - medhochzwei CY - Heidelberg ER - TY - CHAP A1 - Mauerer, Wolfgang A1 - Klessinger, Stefan A1 - Scherzinger, Stefanie T1 - Beyond the badge: reproducibility engineering as a lifetime skill T2 - Proceedings 4th International Workshop on Software Engineering Education for the Next Generation SEENG 2022, 17 May 2022, Pittsburgh, PA, USA N2 - Ascertaining reproducibility of scientific experiments is receiving increased attention across disciplines. We argue that the necessary skills are important beyond pure scientific utility, and that they should be taught as part of software engineering (SWE) education. They serve a dual purpose: Apart from acquiring the coveted badges assigned to reproducible research, reproducibility engineering is a lifetime skill for a professional industrial career in computer science. SWE curricula seem an ideal fit for conveying such capabilities, yet they require some extensions, especially given that even at flagship conferences like ICSE, only slightly more than one-third of the technical papers (at the 2021 edition) receive recognition for artefact reusability. Knowledge and capabilities in setting up engineering environments that allow for reproducing artefacts and results over decades (a standard requirement in many traditional engineering disciplines), writing semi-literate commit messages that document crucial steps of a decision-making process and that are tightly coupled with code, or sustainably taming dynamic, quickly changing software dependencies, to name a few: They all contribute to solving the scientific reproducibility crisis, and enable software engineers to build sustainable, long-term maintainable, software-intensive, industrial systems. We propose to teach these skills at the undergraduate level, on par with traditional SWE topics. KW - reproducibility engineering KW - teaching software engineering Y1 - 2022 SN - 9781450393362 U6 - https://doi.org/10.1145/3528231.3528359 N1 - Preprint unter: https://doi.org/10.48550/arXiv.2203.05283 SP - 1 EP - 4 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Kudienko, Natalie A1 - Pfingsten, Andrea ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Meussling-Sentpali, Annette ED - Mohr, Christa T1 - Empowerment durch Teletherapie T2 - Digitale Technik für ambulante Pflege und Therapie: Herausforderungen, Lösungen, Anwendungen und Forschungsperspektiven Y1 - 2022 SN - 9783839462355 U6 - https://doi.org/10.1515/9783839462355-006 SP - 119 EP - 136 PB - Transcript CY - Bielefeld ER - TY - CHAP A1 - Skornia, Christoph ED - Lang, Michael ED - Löhr, Hans ED - Angermeier, Daniel T1 - Sicherheit in der Cloud T2 - IT-Sicherheit Y1 - 2022 SN - 978-3-446-47223-5 U6 - https://doi.org/10.3139/9783446473478.015 SP - 263 EP - 278 PB - Hanser CY - München ER - TY - CHAP A1 - Will, Anna A1 - Raptis, Georgios ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Meussling-Sentpali, Annette ED - Mohr, Christa T1 - Erfolgsfaktoren und Hemmnisse für die Akzeptanz von Ambient Assisted Living BT - Ein systematisches Literatur-Review T2 - Digitale Technik für ambulante Pflege und Therapie: Herausforderungen, Lösungen, Anwendungen und Forschungsperspektiven Y1 - 2022 SN - 978-3-8376-6235-1 U6 - https://doi.org/10.14361/9783839462355-012 VL - 1 SP - 245 EP - 286 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Gamisch, Bernd A1 - Huber, Lea A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - On the Kinetic Mechanisms of the Reduction and Oxidation Reactions of Iron Oxide/Iron Pellets for a Hydrogen Storage Process JF - Energies N2 - This work aims at investigating the kinetic mechanisms of the reduction/oxidation (redox) reactions of iron oxide/iron pellets under different operating conditions. The reaction principle is the basis of a thermochemical hydrogen storage system. To simulate the charging phase, a single pellet consisting of iron oxide (90% Fe2O3, 10% stabilising cement) is reduced with different hydrogen (H2) concentrations at temperatures between 600 and 800 °C. The discharge phase is initiated by the oxidation of the previously reduced pellet by water vapour (H2O) at different concentrations in the same temperature range. In both reactions, nitrogen (N2) is used as a carrier gas. The redox reactions have been experimentally measured in a thermogravimetric analyser (TGA) at a flow rate of 250 mL/min. An extensive literature review has been conducted on the existing reactions’ kinetic mechanisms along with their applicability to describe the obtained results. It turned out that the measured kinetic results can be excellently described with the so-called shrinking core model. Using the geometrical contracting sphere reaction mechanism model, the concentration- and temperature-dependent reduction and oxidation rates can be reproduced with a maximum deviation of less than 5%. In contrast to the reduction process, the temperature has a smaller effect on the oxidation reaction kinetics, which is attributed to 71% less activation energy (Ea,Re=56.9 kJ/mol versus Ea,Ox=16.0 kJ/mol). The concentration of the reacting gas showed, however, an opposite trend: namely, to have an almost twofold impact on the oxidation reaction rate constant compared to the reduction rate constant. Y1 - 2022 U6 - https://doi.org/10.3390/en15218322 N1 - Corresponding author: Belal Dawoud VL - 15 IS - 21 PB - MDPI ER - TY - CHAP A1 - Rudolph, Clarissa ED - Rudolph, Clarissa ED - Reber, Anne ED - Dollsack, Sophia T1 - Gleichstellung revisited - Diskurse der Gleichstellung und Frauenförderung an Hochschulen in Deutschland T2 - Geschlechtergerechtigkeit und MINT: Irritationen, Ambivalenzen und Widersprüche in Geschlechterdiskursen an Hochschulen KW - Geschlechtergerichtigkeit KW - MINT KW - Geschlechterdiskurs KW - Gleichstellung KW - Hochschule KW - Frauenförderung Y1 - 2022 SN - 9783847416746 U6 - https://doi.org/10.3224/9783847416746 SP - 21 EP - 41 PB - Barbara Budrich CY - Opladen ; Belrin ; Toronto ER - TY - CHAP A1 - Rudolph, Clarissa ED - Rudolph, Clarissa ED - Reber, Anne ED - Dollsack, Sophia T1 - Frauenförderung weiterdenken - Geschlechtergerechtigkeit wagen: Anti-Diskriminierung für mehr Geschlechtergerechtigkeit T2 - Geschlechtergerechtigkeit und MINT: Irritationen, Ambivalenzen und Widersprüche in Geschlechterdiskursen an Hochschulen KW - Geschlechtergerechtigkeit KW - Gleichstellung KW - Geschlechterdiskurs KW - Frauenförderung KW - Hochschule KW - MINT-Fächer KW - Studentin Y1 - 2022 U6 - https://doi.org/10.3224/84742519 SP - 265 EP - 274 PB - Barbara Budrich CY - Opladen ; Berlin ; Toronto ER - TY - GEN A1 - Stelzer, Vera A1 - Rütten, Markus A1 - Krenkel, Lars T1 - Numerical Investigation of a 3D Dragonfly Wing Captured with a High-Resolution Micro-CT T2 - 8th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS Congress 2022, 5-9 June 2022, Oslo, Norway N2 - The special wing geometry of dragonflies consisting of veins and a membrane forming a corrugated profile leads to special aerodynamic characteristics. To capture the governing flow regimes of a dragonfly wing in detail, a realistic wing model has to be investigated. Therefore, this study aimed to analyze the aerodynamic characteristics of a 3D dragonfly wing reconstructed from a high-resolution micro-CT scan. Afterwards, a spatially high discretized mesh was generated using the mesh generator CENTAUR™ 14.5.0.2 (CentaurSoft, Austin, TX, US) to finally conduct Computational Fluid Dynamics (CFD) investigations in Fluent® 2020 R2 (ANSYS, Inc., Canonsburg, PA, US). Due to the small dimensions of the wing membrane, only the vein structure of a Camacinia Gigantea was captured at a micro-CT voxel size of 7 microns. The membrane was adapted and connected to the vein structure using a Boolean union operation. Occurring nconsistencies after combining the veins and the membrane were corrected using an adapted pymesh script [1]. As an initial study, only one quarter of the wing (outer wing section) was investigated to reduce the required computational effort. The resulting hybrid mesh consisting of 10 pseudo-structured prism layers along the wing surface and tetrahedra in the farfield area has 43 mio. nodes. The flow around the wing was considered to be incompressible and laminar using transient calculations. When the flow passes the vein structures, steady vortices occur in the corrugation valleys leading to recirculation zones. Therefore, the dragonfly wing resembles the profile of an airfoil. This leads to comparable lift coefficients of dragonfly wings and airfoil profiles at significantly reduced structural weight. The reconstructed geometry also included naturally occurring triangular prismlike serrated structures at the leading edge of the wing, which have comparable effects to micro vortex generators and might stabilize the recirculation zones. Further work aims to investigate the aerodynamic properties of a complete dragonfly wing during wing flapping. KW - CFD KW - Dragonfly KW - Aerodynamics KW - Gliding Flight Y1 - 2022 ER - TY - GEN A1 - Krenkel, Lars A1 - Michel, Johanna A1 - Keil, Niklas A1 - Daschner, Jan T1 - Experimental Investigation of Logitudinal Folds in Endotracheal Tube Cuffs and their Correlation to Silent Breathing T2 - 23. DGLR Fach-Symposium Strömungen mit Ablösung, 09./10. November 2022, Berlin, Deutschland N2 - Air leakage past High-Volume-Low-Pressure (HVLP) endotracheal tube (ETT) cuffs creates a potential infection risk for health care professionals during ventilation of patients suffering from contagious airborne diseases. However, unlike silent aspiration, a phenomenon where fluids enter the airways of intubated patients, the aspect of aerosol emergence through cuff folds -what we called accordingly “silent breathing” (SB)- has not been investigated in detail so far. This study investigates air leakage past HVLP cuffs with varying cuff pressures under realistic artificial breathing scenarios experimentally and in addition numerically. The focus was laid on the parametric investigation of the occurrence and furthermore on different influencing factors of silent breathing. The morphology of the folds responsible for the leakage was captured using high-resolution 3D microcomputed tomography (μCT). For the numerical investigations (Com-putational Fluid Dynamics - CFD), the commercial CFD Software package FLUENT 2021 R2 (ANSYS, Inc., Canonsburg, PA, US), as well as the DLR in-house research code THETA has been used. KW - Silent Breathing KW - Aerosols KW - CFD KW - Endotracheal Intubation Y1 - 2022 UR - https://www.dlr.de/as/Portaldata/5/Resources/dokumente/veranstaltungen/stab_workshop/Jahresbericht2022.pdf CY - Göttingen ER - TY - GEN A1 - Tauwald, Sandra Melina A1 - Quadrio, Maurizio A1 - Rütten, Markus A1 - Stemmer, Christian A1 - Krenkel, Lars T1 - High Spatial Resolution Tomo-PIV of the Nasopharynx Focussing on the Physiological Breathing Cycle T2 - 23. DGLR Fach-Symposium Strömungen mit Ablösung, 09./10. November 2022, Berlin, Deutschland N2 - Investigations of complex patient-specific flow in the nasopharynx requires high resolution numerical calculations validated by reliable experiments. When building the validation base and the benchmark of computational fluid dynamics, an experimental setup of the nasal airways was developed. The applied optical measurement technique of tomo-PIV supplies information on the governing flow field in three dimensions. This paper presents tomo-PIV measurements of the highly complex patient-specific geometry of the human trachea. A computertomographic scan of a person’s head builds the basis of the experimental silicone model of the nasal airways. An optimised approach for precise refractive index matching avoids optical distortions even in highly complex non-free-of-sight 3D geometries. A linear-motor-driven pump generates breathing scenarios, based on measured breathing cycles. Adjusting of the CCD cameras‘ double-frame-rate PIV-Δt enables the detailed analysis of flow structures during different cycle phases. Merging regions of interest enables high spatial resolution acquisition of the flow field. KW - Tomographic PIV KW - Flow visualisation KW - Physiological Breathing KW - Nasal airflow Y1 - 2022 UR - https://www.dlr.de/as/Portaldata/5/Resources/dokumente/veranstaltungen/stab_workshop/Jahresbericht2022.pdf CY - Göttingen ER - TY - GEN A1 - Stelzer, Vera A1 - Tauwald, Sandra Melina A1 - Vielsmeier, Veronika A1 - Cieplik, Fabian A1 - Kandulski, Arne A1 - Schneider-Brachert, Wulf A1 - Wuensch, Olaf A1 - Rütten, Markus A1 - Krenkel, Lars T1 - Generation, Distribution, and Contagiousness of Surgical Smoke during Tracheotomies T2 - 23. DGLR Fach-Symposium Strömungen mit Ablösung, 09./10. November 2022, Berlin, Deutschland N2 - Surgical smoke has been a little discussed topic in the context of the current pandemic. Surgical smoke is generated during the cauterization of tissue with heat-generating devices and consists of 95% water vapor and 5% cellular debris in the form of particulate matter. In-vivo investigations are performed during tracheotomies where surgical smoke is produced during tissue electrocautery. Furthermore, in-vitro parametric studies to investigate the particle number and size distribution and the spatial distribution of surgical smoke with laser light sheet technique are conducted. The higher the power of the high-frequency-device the larger the particles in size and the higher the resulting particle counts. The images taken show the densest smoke at 40W with artificial saliva. The resulting characteristic size distribution, which may include viruses and bacterial components, confirms that the risk arising from surgical smoke should be considered. Furthermore, the experiments will provide the database for further numerical investigations. Y1 - 2022 UR - https://www.dlr.de/as/Portaldata/5/Resources/dokumente/veranstaltungen/stab_workshop/Jahresbericht2022.pdf CY - Göttingen ER - TY - CHAP A1 - Frommeld, Debora ED - Dalski, Loreen ED - Flöter, Kirsten ED - Keil, Lisa ED - Lohse, Kathrin ED - Sand, Lucas T1 - Vom guten Leben in einer Bildergesellschaft T2 - Optimierung des Selbst N2 - Debora Frommeld widmet ihren Beitrag einer soziologischen und (kultur-)historischen Spurensuche von Selbstoptimierung. Das Phänomen wird in Literatur, Medien und Popkultur häufig als neuartig beschrieben. Dieser Eindruck weicht mit einer modernisierungstheoretischen Analyse zentraler gesellschaftlicher Veränderungen in Deutschland ab der Zeit um 1850 auf. Der Beitrag untersucht die Wechselwirkungen von Mensch und Technik, Technik und Ökonomie sowie Technik und (Gesundheits-)Politik am Beispiel von Optimierungsbestrebungen, die sich auf das Körpergewicht richten. Personenwaagen und Apps spielen dabei eine zentrale Rolle. Der Beitrag verdeutlicht, dass Selbstoptimierung und Selbstvermessung in enger Beziehung stehen und als typische Kennzeichen moderner westlicher Kulturen im 20. und 21. Jahrhundert fungieren. KW - Bildergesellschaft KW - Mind Shaping KW - Body Shaping KW - Personenwaage KW - Vermessung KW - Optimierung KW - Selbstvermessung KW - Selbstoptimierung Y1 - 2022 SN - 978-3-8376-6134-7 U6 - https://doi.org/10.14361/9783839461341-002 VL - 269 SP - 27 EP - 52 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Fuxen, Philipp A1 - Schönhärl, Stefan A1 - Schmidt, Jonas A1 - Gerstner, Mathias A1 - Jahn, Sabrina A1 - Graf, Julian A1 - Hackenberg, Rudolf A1 - Mottok, Jürgen T1 - A Cybersecurity Education Platform for Automotive Penetration Testing JF - International Journal On Advances in Security N2 - The paper presents a penetration testing framework for automotive IT security education and evaluates its realization. The automotive sector is changing due to automated driving functions, connected vehicles, and electric vehicles. This development also creates new and more critical vulnerabilities. This paper addresses a possible countermeasure, automotive IT security education. Some existing solutions are evaluated and compared with the created Automotive Penetration Testing Education Platform (APTEP) framework. In addition, the APTEP architecture is described. It consists of three layers representing different attack points of a vehicle. The realization of the APTEP is a hardware case and a virtual platform referred to as the Automotive Network Security Case (ANSKo). The hardware case contains emulated control units and different communication protocols. The virtual platform uses Docker containers to provide a similar experience over the internet. Both offer two kinds of challenges. The first introduces users to a specific interface, while the second combines multiple interfaces, to a complex and realistic challenge. This concept is based on modern didactic theories, such as constructivism and problem-based/challenge-based learning. Computer Science students from the Ostbayerische Technische Hochschule (OTH) Regensburg experienced the challenges as part of a elective subject. In an online survey evaluated in this paper, they gave positive feedback. Also, a part of the evaluation is the mapping of the ANSKo and the maturity levels in the Software Assurance Maturity Model (SAMM) practice Education & Guidance as well as the SAMM practice Security Testing. The scientific contribution of this paper is to present an APTEP, a corresponding learning concept and an evaluation method. KW - Challenge-based Learning KW - Education Framework KW - Penetration Testing KW - Automotive KW - IT-Security Education Y1 - 2022 UR - http://www.iariajournals.org/security/sec_v15_n34_2022_paged.pdf SN - 1942-2636 VL - 15 IS - 3&4 SP - 106 EP - 118 PB - IARIA ER - TY - CHAP A1 - Krysztof, Michał A1 - Urbański, Paweł A1 - Grzebyk, Tomasz A1 - Hausladen, Matthias A1 - Schreiner, Rupert T1 - MEMS X-Ray Source: Electron Emitter Development T2 - 2022 21st International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS): 12-15 Dec. 2022, Salt Lake City, UT, USA N2 - The article presents a fabrication process and characterization of silicon emitters designed for MEMS X-ray source. The emitters, made of p-type and n-type silicon, were prepared by a modified laser micromachining process. Both types of emitters worked without any carbon nanotube coverage, which was the case in the previous realization of electron emitters. The p-type emitter gave smaller electron beam currents (<50 nA) with stable emission in a saturation region. The n-type emitter provides higher emission currents (>1 µA) not limited by saturation region, but with higher fluctuations. The final choice of emitter will be adjusted for different applications. KW - Micromechanical devices KW - MEMS KW - X-ray source KW - electron emitter KW - X-ray radiation Y1 - 2022 U6 - https://doi.org/10.1109/PowerMEMS56853.2022.10007563 SP - 248 EP - 251 PB - IEEE ER - TY - CHAP A1 - Escher, Lukas A1 - Müller, Max A1 - Rück, Thomas A1 - Jobst, Simon A1 - Bierl, Rudolf T1 - Digitaler Zwilling photoakustischer Spurengassensoren zur Prozessüberwachung T2 - 16. Dresdner Sensor-Symposium 2022: Vorträge N2 - Stickstoffdioxid (NO2) wird hauptsächlich durch anthropogene Verbrennungsprozesse in Verkehr und Industrie in die Umgebungsluft eingebracht [1]. Die stark reaktive, oxidative Wirkung von NO2 kann bei Exposition mit höheren Konzentrationen Reizungen und allergische Reaktionen in den Atemwegen hervorrufen. Weiter führt NO2 zur Bildung von saurem Regen, Smog und Ozon (O3) die sich ebenso negativ auf die menschliche Gesundheit und Umwelt auswirken [2,3]. Aufgrund dieser Effekte wird die Spurengaskonzentration von NO2 in der Luft in Deutschland an ausgewählten, verkehrsreichen Orten gemessen. Y1 - 2022 SN - 978-3-9819376-7-1 U6 - https://doi.org/10.5162/16dss2022/3.3 PB - AMA (Association for Sensors + Measurement) ER - TY - JOUR A1 - Herrmann, Frank A1 - Horkovics-Kovats, Robert A1 - Sultanow, Eldar T1 - Ein paralleler Algorithmus für API Mining von C# Code JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Konformitätsanalyse ist eine Technik der statischen Code-Analyse (SCA) zur Software-Qualitätssicherung. Ihr Kernproblem ist, dass Werkzeuge nicht aus bereits eingetretenen Fehlern automatisiert dazulernen. Zur Lösung wurde in dieser Arbeit das maschinelle Lernen (ML) evaluiert, indem ein wissenschaftlich fundierter und praktisch erprobter Ansatz zur unüberwachten Lerntechnik angewandt und das Ergebnis analysiert wurde. Es wurde festgestellt, dass zur Anwendung auf verschiedene Programmiersprachen nur ein sprachspezifisches API Mining-Tool notwendig ist. Ein derartiges Tool durchsucht in parallelisierter Form Codezeilen und normalisiert sie für maschinelle Lernprozesse. Dieses System wurde für die Programmiersprache C# implementiert, da viele Industrieprojekte in dieser Sprache entwickelt werden. Zur funktionalen Validierung wurde in einer Fallstudie gezeigt, dass Regeln mit einem positiven Effekt auf Software-Qualität gelernt wurden. Konkret wurde der Wartungsaufwand eines Code-Smells in einem Beispielprojekt durch das Auslagern einer gelernten Assoziation in eine gemeinsame Methode um den Faktor 30 reduziert. Die Laufzeit des Algorithmus wurde empirisch in acht open-source Repositorys evaluiert. Durch Parallelisierung kann eine durchschnittliche Laufzeitverbesserung von 45,16% erwartet werden. Allerdings wurden bei der Anwendung auch Grenzen deutlich: Viele Assoziationen sind nutzlos, die Regelbewertung ist von einem subjektiven Faktor abhängig und die Wirtschaftlichkeit des Tools ist deshalb nicht transparent. Dennoch belegt diese Arbeit, dass ein ML-basiertes SCA-Tool als ergänzende Qualitätssicherungsmaßnahme im Software-Engineering möglich ist. KW - Paralleler Algorithmus KW - API Mining KW - C# Code Y1 - 2022 U6 - https://doi.org/10.26034/lu.akwi.2022.3454 SN - 2296-4592 VL - 16 SP - 48 EP - 56 PB - Technische Hochschule Wildau ER - TY - JOUR A1 - Herrmann, Frank A1 - Nangmo Wanko, Merveille A1 - Zeller, Bernhard T1 - Digitale Transformation in Echtzeit: Die Ziele von morgen basierend auf dem Datenmodell von gestern JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Die Digitale Transformation fordert Unternehmen aller Couleur. Ironischer Weise sind es gerade die bisher verwendeten IT-Systeme mit ihren starren Strukturen, die Unternehmen in Ihrer digitalen Trans-formation oft ausbremsen. Auch wenn die Soft-warehersteller längst reagiert haben und neue, flexib-lere Versionen ihrer Produkte anbieten, so ist ein größerer Softwarewechsel immer noch eine Heraus-forderung für Unternehmen und ein Schritt der wohl-überlegt und geplant sein will. In dieser Arbeit wird deshalb ein Vorgehen vorge-stellt, um mittels In-Memory Technologie und Vir-tualisierung zumindest die wichtigsten Ergebnisse der Transformation bereits auf den bestehenden Da-tenmodellen in Echtzeit zu generieren. Dadurch wird genug Zeit gewonnen, um die eigentliche Transfor-mation der IT-Landschaft geplant und mit der not-wendigen Sorgfalt durchzuführen. KW - Digitale Transformation KW - Strategie KW - ALV-GRID KW - Dynpro Y1 - 2022 U6 - https://doi.org/10.26034/lu.akwi.2022.3453 SN - 2296-4592 VL - 16 SP - 37 EP - 47 PB - Technische Hochschule Wildau ER - TY - JOUR A1 - Schönberger, Manuel T1 - Applicability of Quantum Computing on Database Query Optimization JF - SIGMOD '22: proceedings of the 2022 International Conference on Management of Data : June 12-17, 2022, Philadelphia, PA, USA N2 - We evaluate the applicability of quantum computing on two fundamental query optimization problems, join order optimization and multi query optimization (MQO). We analyze the problem dimensions that can be solved on current gate-based quantum systems and quantum annealers, the two currently commercially available architectures. First, we evaluate the use of gate-based systems on MQO, previously solved with quantum annealing. We show that, contrary to classical computing, a different architecture requires involved adaptations. We moreover propose a multi-step reformulation for join ordering problems to make them solvable on current quantum systems. Finally, we systematically evaluate our contributions for gate-based quantum systems and quantum annealers. Doing so, we identify the scope of current limitations, as well as the future potential of quantum computing technologies for database systems. Y1 - 2022 U6 - https://doi.org/10.1145/3514221.3520257 SP - 2512 EP - 2514 PB - ACM CY - New York, NY ER - TY - GEN A1 - Mintel, Mario A1 - Ramsauer, Ralf A1 - Lohmann, Daniel A1 - Scherzinger, Stefanie A1 - Mauerer, Wolfgang T1 - Fork à la carte für In-Memory-Datenbanken T2 - Frühjahrstreffen der Fachgruppen Betriebssysteme, Hamburg, 17. März 2022 Y1 - 2022 UR - https://www.lfdr.de/Publications/2022/FGBS_Spring22_Mintel.pdf ER - TY - JOUR A1 - Englberger, Julian A1 - Herrmann, Frank A1 - Manitz, Michael T1 - Master production scheduling with scenario-based capacity-load factors in a rolling planning environment JF - Logistics Research, Special Issue “Supply Chain Analytics in the 2020s” N2 - This paper proposes two stochastic programming models for master production scheduling with capacity-load factor scenarios. In contrast to other work on production planning with load-dependent lead times or dynamic capacity loads, we iteratively build a set of realistic capacity-load factor scenarios by simulating the realization of the master production schedules in a rolling horizon environment. Therefore, we integrate the models into a hierarchical production planning and control system that is common in industrial practice and measure the effective capacity-load factors. With these factors, we resolve the master production scheduling problem. Toa evaluate the performance of the proposed models, we compare the stochastic models with the common approach to reduce the nominally available capacity for master production scheduling. In our experiments, the stochastic models significantly reduce the tardiness of production orders caused by capacity bottlenecks. Y1 - 2022 U6 - https://doi.org/10.23773/2022_12 VL - 15 SP - 1 EP - 16 PB - Bundesvereinigung Logistik (BVL) e.V. CY - Bremen ER - TY - JOUR A1 - Knödler, Leonard A1 - Baecher, Helena A1 - Kauke-Navarro, Martin A1 - Prantl, Lukas A1 - Machens, Hans-Günther A1 - Scheuermann, Philipp A1 - Palm, Christoph A1 - Baumann, Raphael A1 - Kehrer, Andreas A1 - Panayi, Adriana C. A1 - Knoedler, Samuel T1 - Towards a Reliable and Rapid Automated Grading System in Facial Palsy Patients: Facial Palsy Surgery Meets Computer Science JF - Journal of Clinical Medicine N2 - Background: Reliable, time- and cost-effective, and clinician-friendly diagnostic tools are cornerstones in facial palsy (FP) patient management. Different automated FP grading systems have been developed but revealed persisting downsides such as insufficient accuracy and cost-intensive hardware. We aimed to overcome these barriers and programmed an automated grading system for FP patients utilizing the House and Brackmann scale (HBS). Methods: Image datasets of 86 patients seen at the Department of Plastic, Hand, and Reconstructive Surgery at the University Hospital Regensburg, Germany, between June 2017 and May 2021, were used to train the neural network and evaluate its accuracy. Nine facial poses per patient were analyzed by the algorithm. Results: The algorithm showed an accuracy of 100%. Oversampling did not result in altered outcomes, while the direct form displayed superior accuracy levels when compared to the modular classification form (n = 86; 100% vs. 99%). The Early Fusion technique was linked to improved accuracy outcomes in comparison to the Late Fusion and sequential method (n = 86; 100% vs. 96% vs. 97%). Conclusions: Our automated FP grading system combines high-level accuracy with cost- and time-effectiveness. Our algorithm may accelerate the grading process in FP patients and facilitate the FP surgeon’s workflow. Y1 - 2022 U6 - https://doi.org/10.3390/jcm11174998 VL - 11 IS - 17 PB - MDPI CY - Basel ER - TY - CHAP A1 - Kravanja, Gaia A1 - Belyaeva, Inna A. A1 - Hribar, Luka A1 - Drevenšek‐Olenik, Irena A1 - Shamonin (Chamonine), Mikhail A1 - Jezeršek, Matija T1 - Adaptive Magneto-Responsive Surfaces Fabricated by Laser-Based Microstructuring T2 - Proceedings of the ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2022): September 12-14, 2022, Dearborn, Michigan N2 - Adaptive surface microstructures are used extensively in nature to control various surface properties such as wettability, adhesion, self-cleaning, drag reduction, etc. Regulation of these properties can be achieved with the appropriate employment of a multitude of smart materials, whose characteristics/response can be controlled by noncontact stimuli, e.g., light, heat, or magnetic field. One of the very promising magneto-regulable smart materials are magnetoactive elastomers (MAEs). They are comprised of a compliant polymer matrix with embedded micrometer-sized ferromagnetic particles. The particles interact with each other and a magnetic field. This results in remarkable tunability of the physical properties of MAEs. This paper reports a fast, resilient, and tailored method for direct surface micromachining of MAEs that enables micro-structuring without mechanical contact between the tool and the material, bypassing the usual constraints of conventional fabrication methods. It is shown that it is possible to fabricate a large variety of different microstructure geometries whose precision is limited predominantly by the size of magnetic particles. Lamellar structures with a high aspect ratio (up to 6:1) oriented either perpendicularly to the surface, can be strongly bent by applying magnetic fields in the range of 0–250 mT. KW - adaptive surfaces KW - magnetoactive elastomers KW - magneto-responsive microstructures KW - laser microstructuring Y1 - 2022 SN - 978-0-7918-8627-4 U6 - https://doi.org/10.1115/SMASIS2022-90742 PB - ASME ER - TY - CHAP A1 - Renner, Sebastian A1 - Pozzobon, Enrico A1 - Mottok, Jürgen ED - Li, Wenjuan ED - Furnell, Steven ED - Meng, Weizhi T1 - Evolving a Boolean Masked Adder Using Neuroevolution T2 - Attacks and Defenses for the Internet-of-Things, 5th International Workshop, ADIoT 2022: Copenhagen, Denmark, September 30, 2022, Revised Selected Papers N2 - The modular addition is a popular building block when designing lightweight ciphers. While algorithms mainly based on the addition can reach very high performance, masking their implementations results in a huge penalty. Since efficient protection against side-channel attacks is a requirement in lots of use cases, we focus on optimizing the Boolean masking of the modular addition. Contrary to recent related work, we target evolving a masked full adder instead of parts of a parallel prefix adder. We study how techniques typically found in neural network evolution and genetic algorithms can be adapted in order to help in evolving an efficiently masked adder. We customize a well-known neuroevolution algorithm, develop an optimized masked adder with our new approach and implement the ChaCha20 cipher on an ARM Cortex-M3 controller. We compare the performance of the protected neuroevolved implementation to solutions found by traditional search methods. Moreover, the leakage of our new solution is validated by a t-test conducted with a leakage simulator. We present under which circumstances our masked implementation outperforms related work and prove the feasibility of successfully using neuroevolution when searching for complex Boolean networks. Y1 - 2022 SN - 978-3-031-21310-6 U6 - https://doi.org/10.1007/978-3-031-21311-3_2 SP - 21 EP - 40 PB - Springer Nature CY - Cham ER - TY - CHAP A1 - Renner, Sebastian A1 - Pozzobon, Enrico A1 - Mottok, Jürgen ED - Li, Wenjuan ED - Furnell, Steven ED - Meng, Weizhi T1 - The Final Round: Benchmarking NIST LWC Ciphers on Microcontrollers T2 - Attacks and Defenses for the Internet-of-Things, 5th International Workshop, ADIoT 2022: Copenhagen, Denmark, September 30, 2022, Revised Selected Papers N2 - In this work, we present our benchmarking results for the ten finalist ciphers of the Lightweight Cryptography (LWC) project initiated by National Institute of Standards and Technology (NIST). We evaluate the speed and code size of various software implementations on five different platforms featuring four different architectures. Moreover, we benchmark the dynamic memory utilization of the remaining NIST LWC algorithms on one 32-bit ARM controller. We describe our test cases and methodology and provide some information regarding the design and properties of the finalists before showing and discussing our results. Altogether, we evaluated almost 300 implementations of the 3rd round candidates and pick the most appropriate and best (primary) implementation of each cipher for our comparisons. We include a variant of AES-GCM in our benchmarking in order to be able to compare the state-of-the-art to the novel LWC ciphers. Our research gives an overview over the performance of the latest software implementations of the NIST LWC finalists and shows under which circumstances which candidate is performing the best in our individual test cases. Additionally, we make all benchmarking results, the code for our test framework and every tested implementation available to the public to ensure a transparent testing process. Y1 - 2022 SN - 978-3-031-21311-3 U6 - https://doi.org/10.1007/978-3-031-21311-3_1 SP - 1 EP - 20 PB - Springer Nature CY - Cham ER - TY - BOOK ED - Kellner, Florian ED - Lienland, Bernhard ED - Lukesch, Maximilian T1 - Produktionswirtschaft BT - Planung, Steuerung und Industrie 4.0 N2 - Dieses Buch bietet eine einsteigerfreundliche Einführung in die für industrielle Betriebe maßgebliche Aufgabe der Produktionswirtschaft. Im Zentrum steht dabei das operative Produktionsmanagement. Hierzu gehören die erfolgswirksame Bewirtschaftung der Produktionsfaktoren Mensch, Betriebsmittel und Material, der Einsatz von Information sowie die Planung und Steuerung der industriellen Produktion. Mithilfe zahlreicher Unternehmensbeispiele und Übungsaufgaben wird der Leser durch produktionswirtschaftliche Grundlagen sowie durch Ablauf und Inhalt zentraler Prozesse in der Industrie geleitet. Auch die aktuelle Diskussion um das Thema Industrie 4.0 und cyber-physische Produktionssysteme werden lesefreundlich und mit konkretem Anwendungsbezug präsentiert. KW - Industrie 4.0 KW - Produktionswirtschaft KW - PPS KW - Cyber-physischer System Y1 - 2022 SN - 978-3-662-65802-4 U6 - https://doi.org/10.1007/978-3-662-65803-1 PB - Springer CY - Berlin, Heidelberg ER - TY - JOUR A1 - George, Wolfgang Michael A1 - Sitte, Thomas A1 - Weber, Karsten T1 - Betreuung Schwerkranker und Sterbender in der stationären Versorgung BT - Stand der Dinge und Ausblick JF - Deutsche Zeitschrift für Onkologie N2 - Die Ausgangssituation des Sterbens wird entlang der bestehenden Sterbeortverhältnisse beschrieben. Ein Sterbeortregister fehlt in Deutschland. Deutlich wird, dass bis heute ca. 80% aller Bundesbürger:innen in stationärem Umfeld versterben. Nach Ansicht verschiedener Expert:innen hat die Covid-19-Pandemie zu einem Verlust erreichter Versorgungsqualitäten geführt. Die weiterhin hervorragende Bedeutung einer gültigen Patienten:innenverfügung für die letzte Lebensphase wird erkennbar. In einem Projekt wurde die bestehende Situation, dass 20–25% der sterbenden Pflegeheimbewohner:innen nochmals in ein Krankenhaus verlegt werden, zum Ausgangspunkt gewählt, um geeignete Lösungen zu entwickeln. Auch innerhalb der Krankenhäuser kommt es zu Verlegungen Sterbender, obwohl diese sehr häufig weder pflegerisch-medizinisch noch psycho-sozial indiziert sind. Diese beiden Verlegungsprozesse betreffen jährlich ca. 150 000 Patienten:innen bzw. Bewohner:innen. 13 ursächliche, sich zum Teil wechselseitig beeinflussende Faktoren, wurden entlang von Vorarbeiten empirisch und faktorenanalytisch ermittelt. Unter Begleitung des Marburger Instituts der Arbeitsgemeinschaft der Wissenschaftlichen Medizinischen Fachgesellschaften (AWMF) wurden zwei strukturiert-konsensbasierte Leitlinien entwickelt und in einer Pflegeeinrichtung und einem Krankenhaus implementiert. Ergänzend zu diesen Entscheidungshilfen wurden Leitfäden und Managementwerkzeuge entwickelt, welche die Einführung unterstützen. Als Ergebnis konnte gezeigt werden, dass es nicht nur zu einer Reduktion der Verlegungen, sondern auch zu einer Erhöhung der Mitarbeiter:innenzufriedenheit kam. Die Beteiligten sehen die Möglichkeit, die Leitlinien bundesweit zu transferieren. Das gewählte Projektmanagement, die Anpassungsmöglichkeit der entwickelten Instrumente an regionale Bedingungen, der intersektorale, kollaborative und kommunale Ansatz ermöglichen dies. T2 - Caring for the Seriously Ill and Dying in Inpatient Care : State of Affairs and Outlook KW - Angehörigenintegration KW - Entscheidungshilfe Notärzte KW - Entscheidungshilfe Hausärzte KW - Kommunaler Leitfaden KW - Sterbeorte KW - Regionale Versorgungsleitlinie KW - Verlegungen Sterbender Y1 - 2022 U6 - https://doi.org/10.1055/a-1899-3053 VL - 54 IS - 04 SP - 148 EP - 153 PB - Thieme ER - TY - CHAP A1 - Gersch, Sebastian A1 - Schulz, Carsten A1 - Kral, Christopher T1 - Verifizierung der Prozessstabilität einer konstruierten WAAM-Anlage zum Induzieren von Eigenspannungen in generativ gefertigten Strukturen T2 - 9. Mitteldeutsches Forum - 3D-Druck in der Anwendung: 29. Juni 2022, Jena N2 - Heutzutage werden Strukturen häufig aufwendig konstruiert und nachträglich mithilfe von numerischen Verfahren optimiert. Dennoch kommt es zu erheblichen Schäden infolge von Ermüdungsbrüchen bei wechselnd beanspruchten Bauteilen. Ein Großteil dieser Schäden hat den Ursprung in den im Inneren herrschenden Spannungszuständen, den sogenannten Eigenspannungen. Diese Eigenspannungen heben sich innerhalb des Bauteils auf und führen zu keiner Formabweichung des Bauteils, weswegen diese Spannungen in Form und Lage nur schwer detektierbar sind und sich häufig negativ auf die Betriebsfestigkeit von Strukturen auswirken. Mithilfe neuartiger numerischer Methoden können thermomechanische Simulationen angefertigt und Verformungen, sowie Spannungszustände abgeleitet werden. Durch diese Optionen ergeben sich neue Anwendungen, die das Potenzial von Fertigungsverfahren in Hinblick auf die Ausnutzung spezieller Eigenschaften neu eröffnen. Durch die geschickte Anwendung und Vernetzung der Simulation mit der Fertigung können Eigenspannungen gezielt in Lage und Richtung schon während der Produktion des Bauteils eingebracht werden. Im theoretischen Vergleich zu konventionell gefertigten Bauteilen entstehen Strukturen, die hinsichtlich ihrer Bauteillebensdauer optimiert sind. KW - 3D-Druck KW - Eigenspannungen KW - Betriebsfestigkeit Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-56006 ER - TY - CHAP A1 - Terbrack, Hajo A1 - Claus, Thorsten A1 - Herrmann, Frank ED - Grothe, Oliver ED - Nickel, Stefan ED - Rebennack, Steffen ED - Stein, Oliver T1 - Addressing Energy Consumption and Energy-related Emissions by Single Machine Scheduling T2 - Operations Research Proceedings 2022, Abstracts of the Annual International Conference of the German Operations Research Society (Gor): Karlsruhe, Germany, September 6-9, 2022 Y1 - 2022 ER - TY - CHAP A1 - Herrmann, Frank ED - Herrmann, Frank T1 - Performance of Storage Strategies in a Highbay Warehouse T2 - SIMUL 2022, the 14th International Conference on Advances in System Simulation: October 16-20, 2022, Lisbon, Portugal N2 - Storage and retrieval times of goods in inventory processes determine the efficiency of highbay warehouses in companies. These times are highly dependent on the performance of rack feeders. Storage strategies have the greatest influence. The paper shows the impact of an efficient control of rack feeders through storage strategies. Storage strategies which are typically used in industrial inventory processes are analysed. For the analysis a simulation system is implemented, so that the real process times are similar to the simulated ones. This results in recommendations for the use of storage strategies in companies. KW - highbay warehouse KW - storage strategies KW - simulation of storages and retrievals of goods KW - Inventory processes Y1 - 2022 UR - https://www.thinkmind.org/index.php?view=article&articleid=simul_2022_1_120_58002 SN - 2308-4537 SP - 69 EP - 73 PB - IARIA ER - TY - JOUR A1 - Herrmann, Frank A1 - Ruf, Elena A1 - Dittert, Oliver T1 - Robotic Process Automation als Enabler der Digitalen Transformation der OSRAM Continental GmbH JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Der vorliegende Artikel befasst sich mit der Automa-tisierung von Unternehmensprozessen mit Hilfe von Robotic Process Automation (RPA). Um die zentrale Frage nach den Potentialen von RPA zu beantworten, wurde gemeinsam mit der OSRAM Continental GmbH eine Fallstudie in der Einkaufsabteilung durchgeführt. In dieser Fallstudie werden die Fähigkeiten von Attended RPA sowie die Unterschiede im Vergleich zu einem bereits im Unternehmen beste-henden Workflow-Automation-Systems untersucht. Die Automatisierung hat gezeigt, dass mittels RPA das Automatisierungspotential eindeutig erweitert werden kann. Jedoch wurden ebenso deutlich, dass die Technologie auf bestimmte Aufgaben begrenzt ist und daher ein hybrider Automatisierungsansatz mit beiden Technologien die vielversprechendste Lösung darstellt. Y1 - 2022 U6 - https://doi.org/10.26034/lu.akwi.2022.3329 SN - 2296-4592 IS - 15 SP - 44 EP - 56 PB - Hochschule Luzern ER - TY - JOUR A1 - Herrmann, Frank A1 - Engl, Fabian A1 - Trubjansky, Philipp T1 - Ein funktionaler Vergleich der SAP Analytics Cloud und Microsoft Power BI zur Verwendung im Bereich People Analytics bei Vitesco Technologies JF - Anwendungen und Konzepte der Wirtschaftsinformatik N2 - Aufgrund leistungsbedingter Einschränkungen durch die aktuelle Business-Intelligence-Software PowerBI vergleicht die People-Analytics-Abteilung von Vitesco Technologies diese mit der Alternativsoftware SAP Analytics Cloud. Dafür wurden zunächst aktuelle Herausforderungen im People-Analytics-Umfeld identifiziert und basierend darauf Vergleichskriterien erarbeitet. Als Vergleichsmodell kommt das Kano-Modell zum Einsatz. Die durchgeführte Evaluation favorisiert aus funktionaler Sicht einen Umstieg auf die SAP Analytics Cloud, identifiziert allerdings eine Reihe an Herausforderungen, die einen sofortigen Wechsel einschränken. Zu diesen gehören sowohl die Verfügbarkeit als auch die Qualität der HR-Daten. KW - Business Intelligence KW - SAP Analytics Cloud KW - SAC KW - Power BI KW - Cloud Computing KW - Kano-Modell KW - Vergleich KW - People Analytics KW - HR Y1 - 2022 U6 - https://doi.org/10.26034/lu.akwi.2022.3337 SN - 2296-4592 IS - 15 SP - 8 EP - 21 PB - Hochschule Luzern ER - TY - RPRT A1 - Kleine, Nadine A1 - Weber, Karsten T1 - Möglichkeiten gesellschaftlicher Normierung bzw. Regulierung von und durch KI BT - Bericht aus dem Forschungsprojekt „Künstliche Intelligenz, Mensch und Gesellschaft“ N2 - Die KI-Regulierung bzw.-Normierung ist nicht nur aufgrund der ständig neuen technischen Entwicklungen und Anwendungsfelder ein schwieriges Unterfangen - auch die Komplexität des Regulierungsfeldes bringt viele Herausforderungen mit sich. Aktuelle Regulierungsansätze unterscheiden sich stark in ihrem Entwicklungsstatus und ihrer Wirkmächtigkeit. Viele verschiedene Akteur*innengruppen und Interessenslagen gestalten den Diskurs mit und ringen um die Deutungshoheit. Die Regulierung von KI steht in dynamischer Wechselwirkung mit der Normierung der Gesellschaft durch KI. Trotz der komplexen Lage ist es möglich, effektive Regularien für KI zu entwickeln. Eine wichtige Voraussetzung ist die Berücksichtigung des dicht gesponnenen Netzes, in dem die Regulierung stattfinden kann. KW - Artificial Intelligence Act KW - Deutungshoheit über KI KW - gesellschaftliche Interessens- und Machtverhältnisse KW - gesellschaftliches Narrativ von KI KW - Normierung von und durch KI KW - normierende Wirkung von Technik Y1 - 2022 U6 - https://doi.org/10.13140/RG.2.2.20716.23681 PB - KI.Me.Ge. ER - TY - JOUR A1 - Thiel, Charlotte A1 - Kratzer, Johanna A1 - Grimm, Benedikt A1 - Kränkel, Thomas A1 - Gehlen, Christoph T1 - Effect of Internal Moisture and Outer Relative Humidity on Concrete Carbonation JF - CivilEng N2 - With steadily rising CO2 concentrations in the ambient air and fast-changing concretecompositions with reduced clinker contents, the availability of reliable and accelerated concrete car-bonation tests is of crucial importance to design durable structures. This paper focuses on the effectsof moisture under accelerated conditions and the effects of different CO2 exposure conditions. Mor-tar prisms incorporating three different cement types were cured and stored at either 50% or 65%relative humidity (RH). Afterwards, the prisms were carbonated at different ambient humidities(50, 57 and 65%), different CO2 concentrations (0.04, 1 and 3 vol.%) and complemented by a seriesof tests at increased gas pressure (2 barg). High-resolution test methods were used to explain theunderlying carbonation mechanisms. The results show that pre-conditioning for two weeks—ascurrently suggested by the European Standard—seems to be too short because the initial inner mois-ture content severely affects the carbonation rate. Relative humidity during carbonation of 57% ledto higher carbonation rates compared to 50% and 65%. In addition, climate data needs to be period-ically (preferably permanently) recorded in research experiments and in laboratory testing to ensurefair interpretation of experimental results. KW - accelerated carbonation KW - concrete KW - moisture KW - durability KW - relative humidity Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-56091 N1 - Corresponding author: Charlotte Thiel VL - 4 IS - 3 SP - 1039 EP - 1052 PB - MDPI CY - Basel ER - TY - JOUR A1 - Davendra, Donald A1 - Herrmann, Frank A1 - Bialic-Davendra, Magdalena T1 - Chaotic Flower Pollination Algorithm for scheduling tardiness-constrained flow shop with simultaneously loaded stations JF - Neural computing & applications N2 - This paper introduces a novel chaotic flower pollination algorithm (CFPA) to solve a tardiness-constrained flow-shop scheduling problem with simultaneously loaded stations. This industrial manufacturing problem is modeled from a filter basket production line in Germany and has been generally solved using standard deterministic algorithms. This research develops a metaheuristic approach based on the highly efficient flower pollination algorithm coupled with different chaos maps for stochasticity. The objective function targeted is the tardiness constraint of the due dates. Fifteen different experiments with thirty scenarios are generated to mimic industrial conditions. The results are compared with the genetic algorithm and with the four standard benchmark priority rule-based deterministic algorithms of First In First Out, Raghu and Rajendran, Shortest Processing Time and Slack. From the obtained results and analysis of the relative difference, percentage relative difference and t tests, CFPA was found to be significantly better performing than the deterministic heuristics and the GA algorithm. KW - Flower pollination algorithm KW - Chaos maps KW - Flow shop with tardiness Y1 - 2022 U6 - https://doi.org/10.1007/s00521-022-08044-0 PB - Springer Nature ER - TY - JOUR A1 - Lauer, Norina T1 - Interprofessionelle Zusammenarbeit im klinischen Setting JF - Logos. Die Fachzeitschrift für Logopädie und Sprachtherapie N2 - Interprofessionelle Zusammenarbeit ist ein entscheidender Faktor für eine erfolgreiche Gesundheitsversorgung. Gerade im klinischen Setting kommen täglich mehrere Professionen zusammen, deren Aufgabengebiete aneinander angrenzen oder sich überschneiden. Pflegefachkräfte und ÄrztInnen stellen hierbei in der Regel die größten Berufsgruppen dar. In einer qualitativen Interviewstudie wurde im Rahmen eines Projekts zum forschenden Lernen der Frage nachgegangen, von welchen Erfahrungen diese beiden Berufsgruppen über den Austausch mit LogopädInnen bzw. SprachtherapeutInnen in ihrem eigenen klinischen Umfeld im Hinblick auf Förderfaktoren und Barrieren für Interprofessionalität berichten können. Neun Pflegefachkräfte und sechs ÄrztInnen von sechs stationären Einrichtungen nahmen an den Interviews teil. Die Auswertung erfolgte mittels der qualitativen Inhaltsanalyse. In den Ergebnissen werden subjektive Sichtweisen auf die koordinierte Zusammenarbeit der unterschiedlichen Berufsgruppen deutlich. Es zeigt sich, dass eine positive und wertschätzende Kommunikationskultur eine wichtige Rolle bei der interprofessionellen Versorgung spielt und die Logopädie/Sprachtherapie als Mitglied im sog. ‚Knotenpunkt-Team‘ geschätzt wird. Davon ausgehend werden Verbesserungspotenziale für den interprofessionellen Austausch diskutiert, die sich auf übergeordnete Rahmenbedingungen, strukturelle Aspekte, persönliche Faktoren und Ausbildungsbedingungen beziehen, sowie Vorschläge für weitere Forschung angesprochen. KW - Kooperation KW - Gesundheit KW - Interprofessionalität KW - qualitative Forschung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-56068 SN - 0944-405X VL - 30 IS - 4 SP - 266 EP - 276 PB - ProLog, Therapie- und Lernmittel GmbH CY - Köln ER - TY - CHAP A1 - Galka, Stefan T1 - Untersuchung von Auftragsfreigabestrategien für mehrzonige Kommissioniersysteme im Online-Lebensmittelhandel T2 - ASIM SST 2022 Proceedings Langbeiträge, 26. ASIM Symposium Simulationstechnik: 25.07.-27.07.2022, TU Wien N2 - This paper briefly presents the challenges for order control and release of multi-zone order picking systems. On the one hand, the order control must ensure that all orders are processed on time, and on the other hand, the space requirements (buffer) and the utilisation of the zones must be considered. Within the framework of a case study, different strategies for order release were developed. The paper shortly describes the ideas of the strategies and presents results of a case-based simulative evaluation of the strategies. The findings of the simulation study are the basis for the development of a digital twin for the operational control of multi-zone picking systems. KW - Simulation KW - Kommissionierung KW - Simulation KW - Logistik KW - Planung Y1 - 2022 SN - 978-3-901608-97-1 U6 - https://doi.org/10.11128/arep.20.a2021 VL - 2022 SP - 23 EP - 30 PB - ARGESIM Verlag CY - Wien ER - TY - JOUR A1 - Galka, Stefan A1 - Follath, Alexander A1 - Bross, Florian ED - Bauer, Wilhelm ED - Volk, Wolfram ED - Zäh, Michael T1 - Vorgehensmodell zur Erstellung Digitaler Zwillinge für Produktion und Logistik JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Der Digitale Zwilling (DZ) ist ein wichtiger Bestandteil der Industrie 4.0 und ermöglicht Anwendungen wie Predictive Maintenance, virtuelles Prototyping oder die Steuerung von Produktions- und Logistikprozessen. Herausforderungen bei der Entwicklung des Digitalen Zwillings entstehen durch fehlende Struktur und Standards. Mit diesem Beitrag soll ein Vorgehensmodell für die Erstellung eines Digitalen Zwillings im Bereich der Produktion und Logistik aufgezeigt werden. Das Vorgehensmodell hilft bei der Einordnung, für welche Anwendungsfälle ein Digitaler Zwilling entwickelt werden kann, welche Schritte bei einer Umsetzung erfolgen müssen, und gibt einen Überblick über die Voraussetzungen und Komplexität bei der Entwicklung. Das zentrale Element bildet dabei die zielgerichtete Aufbereitung und Analyse der zugrunde liegenden Daten mittels des in der Industrie etablierten Vorgehensmodell CRISP-DM. KW - Digitale Zwillinge KW - Simulation KW - Logistik KW - Produktion Y1 - 2022 U6 - https://doi.org/10.1515/zwf-2022-1127 VL - 117 IS - 11 SP - 691 EP - 696 PB - De Gruyter CY - Berlin ER - TY - THES A1 - Lerch, Maximilian T1 - Hochauflösende faseroptische Dehnungsmessungen zur Ermittlung des Tragverhaltens von Pfählen und pfahlartigen Traggliedern N2 - Zur Untersuchung und Prognose des Tragverhaltens von Pfählen und pfahlartigen Traggliedern wurden auf einem geotechnisch umfangreich erkundeten Testfeld dynamische und statische Pfahlprobebelastungen durchgeführt und anschließend wissenschaftlich ausgewertet. Die Ergebnisse der experimentellen Untersuchungen im Maßstab 1:1 lieferten neue Erkenntnisse über die Tragmechanismen der Pfähle und pfahlartigen Traggliedern und über Zusammenhänge zwischen den Ergebnissen der dynamischen und statischen Probebelastungen. Darüber hinaus bildeten die Erkenntnisse und Messergebnisse aus den verschiedenen Probebelastungen die Grundlage für die Entwicklung innovativer numerischer Simulationsmodelle zur Prognose des Tragverhaltens der Tragglieder. Um die genannten Effekte im Tragverhalten der Pfähle und pfahlartigen Tragglieder genauer zu untersuchen, wurde faseroptische Sensortechnik eingesetzt. Mit den Messergebnissen des Wellenausbreitungsverhaltens und deren Auswertung im Zeit- und Frequenzbereich konnte ein Zusammenhang zwischen Mantelreibung und Ausbreitungsgeschwindigkeit der eingeleiteten Welle in den Pfählen durch einen Vergleich mit den ermittelten Mantelreibungskurven aus quasi-kontinuierlicher Messung qualitativ nachgewiesen werden. Ergänzend zu den Belastungsversuchen wurden numerische Simulationsmodelle erstellt, um das Pfahl-Boden-Interaktionsverhalten unter dynamischer und statischer Belastung darzustellen und vorherzusagen. Die entwickelten Verfahren zur Prognose des Tragverhaltens von Pfählen und pfahlartigen Traggliedern können fallspezifisch eingesetzt werden, um eine Optimierung des Planungsprozesses der Tragglieder zu erreichen. Zur Ermittlung des Tragverhaltens der Pfählen ist es nicht erforderlich, ein umfangreiches Versuchsprogramm mit statischen oder dynamischen Lastversuchen durchzuführen, wie es üblicherweise der Fall ist. Anhand von Lastversuchen an ausgewählten und sorgfältig instrumentierten Traggliedern können die erforderlichen Referenzdaten ermittelt werden, um mit den vorgestellten Simulationsverfahren und Simulationsmethodiken das Tragverhalten bzw. die mobilisierten Widerstände im Pfahl-Boden-Interaktionsverhalten vorherzusagen. Die Ergebnisse der Arbeit haben gezeigt, dass für CFA-Pfähle Messdaten zum axialen Wellenausbreitungsverhalten in den Pfählen und konventionelle Messungen der Schwinggeschwindigkeit an den Pfahlköpfen ausreichen, um das Tragverhalten in guter Korrelation zu den Messungen aus statischen Lastversuchen darzustellen. KW - Pfähle KW - faseroptische Sensorik KW - pfahlartige Tragglieder KW - numerische Prognosemodelle KW - Probebelastungen Y1 - 2022 U6 - https://doi.org/10.14279/depositonce-16492 N1 - Technische Universität Berlin / Fakultät VI - Planen Bauen Umwelt, Dissertation PB - Berlin ER - TY - CHAP A1 - Schroll-Decker, Irmgard A1 - Seidenstücker, Barbara ED - Schöpf, Nicolas T1 - Soziale Arbeit berufsbegleitend studieren - Idee, Struktur, Erfahrungen. T2 - Akademische Weiterbildung für soziale Berufe: Theoretische, empirische und praktische Aspekte N2 - Motivierende erste Erfahrungen mit der Implementierung eines berufsbegleitenden Studiengangs Soziale Arbeit an einer technischen Hochschule, ein als dringlich ausgewiesene Fachkräftequalifizierungsbedarf in sozialpädagogischen Handlungsfeldern und die Bereitschaft der Hochschulleitung der Ostbayerischen Technischen Hochschule (OTH) Regensburg, sich in Kooperation mit der Fakultät Angewandte Sozial- und Gesundheitswissenschaften auf die Anforderungen der Ausschreibung „Partnerschaft Hochschule und Region“ einzulassen, ließen ein neues Studiengangkonzept für einen berufsbegleitenden Bachelor Soziale Arbeit entstehen. Parallel zum Studienfortschritt der inzwischen verabschiedeten ersten Kohorte konnten erste Erfahrungen gewonnen werden, welche Innovationsimpulse, welche Nachsteuerungsbedarfe und welche Veränderungen sich für die berufliche Entwicklung der Studierenden ergeben haben. KW - Studiengang Soziale Arbeit KW - Teilstudium KW - Berufsbegleitendes Studium KW - Soziale Arbeit KW - Regionalisierung KW - Blended-Learning-Format KW - Konzeption Y1 - 2022 UR - https://library.oapen.org/bitstream/handle/20.500.12657/58466/1/external_content.pdf SN - 9783763966462 N1 - Gefördert durch wbv Open-Library 2021 SP - 25 EP - 42 PB - wbv Verlag CY - Bielefeld ER - TY - JOUR A1 - Auer, Simon A1 - Schiebl, Jonas A1 - Iversen, Kristoffer A1 - Subhash Chander, Divyaksh A1 - Damsgaard, Michael A1 - Dendorfer, Sebastian T1 - Biomechanical assessment of the design and efficiency of occupational exoskeletons with the AnyBody Modeling System JF - Zeitschrift für Arbeitswissenschaften N2 - Exoskeletons were invented over 100 years ago but have only become popular in the last two decades, especially in the working industry as they can decrease work-related loads significantly. The most often used exoskeletons are for the lower back and shoulder since these are commonly affected body regions. All devices have in common that their purpose is to reduce internal loads of vulnerable body regions. Nevertheless, there is still little understanding on how biomechanical loading in the human body changes when exoskeletons are used. Therefore, further analyses are needed. A promising candidate for these are musculoskeletal models, which are based on an inverse dynamics approach and can calculate external parameters such as ground reaction forces or other interaction forces as well as internal parameters such as joint reaction forces or muscle activities. The various examples in the literature show that these models are increasingly used for assessing the biomechanical effects of exoskeletons on the human body. Furthermore, musculoskeletal models can calculate biomechanical loadings of humans with and without exoskeletons for all kinds of applications and allow an evaluation of their purpose. Practical Relevance: This article highlights the possibilities of musculoskeletal models for assessing the design and efficiency of occupational exoskeletons. Several practical use cases are described along with distinct descriptions of common implications of musculoskeletal and exoskeleton modeling. KW - Biomechanics KW - Ergonomics KW - Motion capture KW - Inverse dynamics Y1 - 2022 U6 - https://doi.org/10.1007/s41449-022-00336-4 N1 - Corresponding author: Sebastian Dendorfer VL - 76 IS - 4 SP - 440 EP - 449 PB - Springer Nature ER - TY - INPR A1 - Rill, Georg A1 - Schaeffer, Thomas A1 - Schuderer, Matthias T1 - LuGre or not LuGre N2 - The LuGre model is widely used in the analysis and control of systems with friction. Recently, it has even been made available in the commercial multibody dynamics simulation software system Adams. However, the LuGre model exhibits well-known drawbacks like, too low and force rate dependent break-away forces, drift problems during sticking periods, and significant differences in non-stationary situations between the pre-defined friction law and the one produced by the LuGre model. In the present literature, these problems are supposed to come from the model dynamics or its nonlinear nature. However, most of these drawbacks are not simple side effects of a dynamic friction model but are caused in the LuGre approach, as shown here, by a too simple and inconsistent model of the bristle dynamics. Standard examples and a more practical application demonstrate, that the LuGre model is not a “what you see is what you get” approach. A dynamic friction model with accurate bristle dynamics and consistent friction force is set up here. It provides insight into the physical basis of the LuGre model dynamics. However, it results in a nonlinear and implicit differential equation, whose solution will not be easy because of the ambiguity of the friction characteristics. The standard workaround, a static model based on a simple regularized characteristics, produces reliable and generally satisfactory results, but definitely cannot maintain stick. The paper presents a second order dynamic friction model, which may serve as an alternative. It can maintain stick and produces realistic and reliable results. Y1 - 2022 U6 - https://doi.org/10.21203/rs.3.rs-2266522/v1 ER - TY - CHAP A1 - Maier, Robert A1 - Grabinger, Lisa A1 - Urlhart, David A1 - Mottok, Jürgen ED - Seguin, Christel ED - Zeller, Marc ED - Prosvirnova, Tatiana T1 - Towards Causal Model-Based Engineering in Automotive System Safety T2 - Model-Based Safety and Assessment, 8th International Symposium, IMBSA 2022: Munich, Germany, September 5–7, 2022, Proceedings N2 - Engineering is based on the understanding of causes and effects. Thus, causality should also guide the safety assessment of complex systems such as autonomous driving cars. To ensure the safety of the intended functionality of these systems, normative regulations like ISO 21448 recommend scenario-based testing. An important task here is to identify critical scenarios, so-called edge and corner cases. Data-driven approaches to this task (e.g. based on machine learning) cannot adequately address a constantly changing operational design domain. Model-based approaches offer a remedy – they allow including different sources of knowledge (e.g. data, human experts) into safety considerations. With this paper, we outline a novel approach for ensuring automotive system safety. We propose to use structural causal models as a probabilistic modelling language to combine knowledge about an open-context environment from different sources. Based on these models, we investigate parameter configurations that are candidates for critical scenarios. In this paper, we first discuss some aspects of scenario-based testing. We then provide an informal introduction to causal models and relate their development lifecycle to the established V-model. Finally, we outline a generic workflow for using causal models to identify critical scenarios and highlight some challenges that arise in the process. Y1 - 2022 U6 - https://doi.org/10.1007/978-3-031-15842-1_9 SP - 116 EP - 129 PB - Springer Nature CY - Cham ER - TY - GEN A1 - Renner, Sebastian A1 - Pozzobon, Enrico A1 - Mottok, Jürgen T1 - 3rd Round Ciphers Evaluation on Microcontrollers T2 - Lightweight Cryptography Workshop (virtual): May 9-11 2022 Y1 - 2022 UR - https://www.nist.gov/video/day-1-part-2-lightweight-cryptography-workshop-2022 PB - National Institute of Standards and Technology (NIST) CY - Gaithersburg ER - TY - JOUR A1 - George, Wolfgang Michael A1 - Künne, Edna A1 - Weber, Karsten T1 - Im Sinne der Sterbenden entscheiden BT - Leitlinien für eine bessere Versorgung im letzten Lebensabschnitt. JF - Die Schwester / Der Pfleger Y1 - 2022 IS - 12 SP - 1 EP - 4 PB - Bibliomed-Medizinische Verlagsges. CY - Melsungen ER - TY - JOUR A1 - Weber, Karsten A1 - Scorna, Ulrike A1 - George, Wolfgang Michael T1 - Ethische Dimensionen der Begleitung Sterbender BT - Eine qualitative Erhebung der Bedingungen des Sterbeprozesses in deutschen Pflegeeinrichtungen JF - Pflege & Gesellschaft N2 - Wie Untersuchungen zeigen, beeinträchtigen nicht medizinisch indizierte Verlegungen die Lebens- und Versorgungsqualität Sterbender stark. Das Projekt Avenue-Pal hat das Ziel, Leitlinien zu entwickeln, die diese unnötigen Verlegungen reduzieren sollen. Die hier vorgestellte Begleitstudie untersucht aus ethischer Sicht die im Sterbe- und Verlegungsprozess stattfinden Abläufe sowie deren potenziellen Gestaltungsmöglichkeiten. Mittels einer Literaturrecherche, der Teilnahme an einem Fokusgruppengespräch und einer modifizierten MEESTAR-Befragung werden die Bedingungen für eine optimale Betreuung Sterbender sowie für ein würdevolles Sterben identifiziert und die aktuellen Abläufe im Rahmen des Verlegungsmanagements vor und während der Implementierung der Leitlinien unter Berücksichtigung der ethischen Dimensionen Selbstverständnis, Selbstbestimmung, Fürsorge, Gerechtigkeit, Privatheit und Teilhabe analysiert. Die Ergebnisse der Untersuchung zeigen, dass Verlegungen v.a. aus Unsicherheiten, mangelndem palliativmedizinischem Wissen oder Personalmangel resultieren und dass die Etablierung der Leitlinien und eines palliativen Konsildienstes besonders die fachliche Kompetenz des Personal stärkt und dadurch unnötige Verlegungen reduziert werden konnten. Y1 - 2022 U6 - https://doi.org/10.3262/P&G2204337 SN - 1430-9653 VL - 27 IS - 4 SP - 337 EP - 354 PB - Beltz Juventa CY - Weinheim ER - TY - CHAP A1 - Weber, Karsten ED - Drüeke, Ricarda ED - Gmainer-Pranzl, Franz T1 - Kommunikation und Zivilgesellschaft: Hoffnungen und Realität T2 - Kommunikation und Medien zwischen Kulturindustrie, Lebenswelt und Politik KW - Zivilgesellschaft KW - Kommunikation KW - Neue Medien Y1 - 2022 SN - 978-3-631-88308-2 SP - 15 EP - 31 PB - Peter Lang CY - Frankfurt a.M. ER - TY - CHAP A1 - Scherer, Leo A1 - Vitzthumecker, Thomas A1 - Bierl, Rudolf ED - Uhl, Christian ED - Walter, Michael ED - Stiehl, Annika T1 - Capacitive PCB sensor for the detection of insects in intelligent traps T2 - Applied Research Conference 2022 Conference Proceedings: 4th July 2022, University of Applied Sciences Ansbach (Onsite Conference) N2 - Reliable and fast detection of pest in the food processing and pharmaceutical industry is crucial to ensure hygienically safe, pure and healthy products. This is why intelligent traps, that are able to detect insects automatically are needed. For this, a capacitive PCB sensor is developed and tested, which could be a simplistic, low power solution to the problem. This includes design, footprint generation and simulation as well as testing different types of capacitve sensing against noise immunity and sensitivity to Blattella germanica, the German cockroach. It is shown that a single specimen can very well and reliably be detected by the developed sensor. KW - PCB layout generation KW - insect monitoring KW - pest detection KW - Capacitive sensing Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55837 SP - 519 EP - 523 PB - Hochschule Ansbach CY - Ansbach ER - TY - JOUR A1 - Obermaier, Lisa A1 - Lehle, Karla A1 - Schmid, Stefanie A1 - Schmid, Christof A1 - Schratzenstaller, Thomas T1 - Introduction of a new ex vivo porcine coronary artery model: Evaluation of the direct vascular injury after stent implantation with and without dogbone effect JF - European Surgical Research N2 - Introduction: Neointimal hyperplasia after percutaneous coronary intervention remains a major determinant of in-stent restenosis (ISR). The extent of mechanical vessel injury correlates with ISR. A new ex vivo porcine stent model was introduced and evaluated comparing different stent designs. Methods: Coronary arteries were prepared from pig hearts from the slaughterhouse and used for ex vivo implantations of coronary stents. One basic stent design in two configurations (dogbone, DB; non-dogbone, NDB) was used. Vascular injury was determined according to a modified injury score (IS). Results: Standardized experimental conditions ensured comparable vessel dimensions and overstretch data. DB stents caused more severe IS compared to NDB stents. The mean IS and the IS at the distal end of all stents were significantly reduced for NDB stents (ISMean, DB, 1.16 ±0.12; NDB, 1.02 ±0.12; p=0.018; ISDist, DB, 1.39 ±0.28; NDB, 1.13 ±0.24; p=0.03). Discussion/Conclusion: The introduced ex-vivo model allowed the evaluation of different stent designs exclude unfavorable stent designs. KW - Stent screening KW - Stent design KW - Injury score KW - Ex vivo porcine stent model Y1 - 2022 U6 - https://doi.org/10.1159/000527883 SN - 1421-9921 VL - 63 IS - 4 SP - 285 EP - 293 PB - Karger CY - Basel ER - TY - THES A1 - Schlamp, Matthias T1 - Der Einfluss elliptischer Krümmung auf das Verformungs- und Schädigungsverhalten glasfaserverstärkter Kunststoffstrukturen N2 - In Industriebereichen, in welchen Masse aufgrund von Trägheit oder Gravitationsüberwindung einen beeinflussenden Faktor ausmacht, wie beispielsweise der Luft- und Raumfahrt oder der Windkraft, spielen faserverstärkte Kunststoffstrukturen aufgrund ihres Leichtbaupotentials hinsichtlich der dichtespezifischen Steifigkeit und Festigkeit eine große Rolle. Außen liegende Bauteile in Form dünnwandiger Flächentragwerke in diesen Anwendungen weisen zumeist nicht eine kreisrunde, sondern unstetige Bauteilkrümmung auf und sind aufgrund ihres Einsatzortes durch Schlagbelastungen (Impacts) in verschiedenen Geschwindigkeitsbereichen gefährdet. Besonders im Niedergeschwindigkeitsbereich sind diese Impacts bei diesen meist gekrümmten Strukturen als kritisch zu beurteilen, da sie von außen oftmals nicht sichtbar sind, sich aber stark auf die verbleibende Restfestigkeit, insbesondere die Druck- und Schwingfestigkeit, aufgrund inter- und intralaminarer Schädigungen auswirken. Sie stellen demnach eine kritisch zu betrachtende Belastungsart dar. In der vorliegenden Arbeit werden oben benannte unstetig gekrümmte Flächentragwerke auf eine unstetig elliptisch gekrümmte Prüfkörpergeometrie in Anlehnung an den Querschnitt einer Flügelvorderkante abstrahiert. Mittels experimenteller, numerischer und analytischer Untersuchungen wird ein grundlegendes Verständnis des Krümmungseinflusses auf das Schädigungs- und Verformungsverhalten ebendieser Strukturen bei Impact-Belastung und quasi-statischer Druckbelastung erarbeitet. Prüfkörper mit vier verschiedenen Krümmungsstufen werden dahingehend unter Verwendung einer Fallbolzenanlage im Niedergeschwindigkeitsbereich schädigend geprüft und die resultierende projizierende Schadensfläche in Abhängigkeit des Krümmungsgrades ausgewertet. Zur Untersuchung des reinen Krümmungseinflusses werden Prüfkörper in quasistatischen Druckversuchen im elastischen Bereich auf deren Verformungsverhalten hin analysiert. Durch Einführung des geometriebedingten Verformungswiderstandes als vergleichende Kenngröße kann auf Basis lokal variierender Struktursteifigkeiten ein Zusammenhang aus dem Impact-Verhalten und dem elastischen Verformungsverhalten gleicher Krümmungsstufen geschlossen werden. Durch begleitende numerische Untersuchungen wird das Verformungsverhalten sowie die sich dabei einstellenden einzelschichtspezifischen Spannungszustände untersucht. Weiterhin werden bestehende analytische Berechnungsmethoden für stetige Kreisbögen im Berechnungsumfang erweitert und auf die vorliegende Problemstellungübertragen. Eine Gegenüberstellung und Diskussion aller erfassten Versuchs- und Berechnungsergebnisse zeigt abschließend gemeinsame Abhängigkeiten auf. KW - Gekrümmte Struktur KW - Impact-Schädigung KW - Strukturmechanik KW - Glasfaserverstärkter Kunststoff Y1 - 2022 U6 - https://doi.org/10.6094/UNIFR/228064 N1 - Der Dr.-Titel wurde von der Albert-Ludwigs-Universität Freiburg im Breisgau verliehen. ER - TY - GEN A1 - Judenmann, Anna A1 - Pongratz, Christian A1 - Ehrlich, Ingo A1 - Höfer, Philipp A1 - Holtmannspötter, Jens T1 - Additive Fertigung von endlosfaserverstärkten Kunststoffstrukturen T2 - Münchner Leichtbauseminar 2022, 26. October 2022, 16. November 2022, 30 November 2022, Munich/Neubiberg/Garching N2 - Additive Fertigung hat sich in zahlreichen industriellen Anwendungen etabliert und bildet eine wichtige Schlüsseltechnologie. Im Gegensatz zu metallischen Werkstoffen, haben additiv gefertigte Bauteile aus Kunststoffen geringere Festigkeit und Steifigkeit, sodass sich ihre Verwendung als lasttragende Strukturen schwierig gestaltet. Insbesondere der Einsatz von endlosen Verstärkungsfasern kann die mechanischen Eigenschaften additiv gefertigter Strukturen signifikant verbessern und die Fertigung hochbelastbarer Faserverbundstrukturen im 3D-Druckverfahren ermöglichen. Daher gilt es aktuell notwendige Anlagen und Prozessketten für den Fertigungsprozess aber auch Vorgehensweisen für die belastungsoptimierte Auslegung der Faserverläufe innerhalb des Bauteils zu entwickeln, um so das Themengebiet „Endlosfaserverstärkter 3D-Druck“ weiter voranzutreiben. Für mehr räumliche Freiheit bei der Positionierung der Druckbahnen können industrieroboterbasierte Systeme eingesetzt werden, um so das Potenzial gerichteter Bauweise von Faserverbundstrukturen auch im additiven Fertigungsprozess vollumfänglich ausschöpfen zu können. Dabei ermöglicht ihr Einsatz auch eine räumliche Ablage der Faserverstärkung, wobei für die Materialablage ein geeigneter 3D-Druckkopf erforderlich ist. Für die Implementierung der Faserverstärkung ist zudem eine dem Lastfall entsprechende Auslegung des Bauteils sowie die Ermittlung einer sinnvollen Faserpositionierung innerhalb des Bauteils erforderlich, wobei unterschiedliche Variablen aus den Bereichen Material, Struktur und Fertigungsprozess berücksichtigt werden müssen. Im Rahmen des Vortrages werden die Herausforderungen der Technologieentwicklung des endlosfaserverstärkten 3D-Drucks aufgegriffen sowie auf eine belastungsorientierte Faserpositionierung näher eingegangen. Aktuelle Erkenntnisse werden diskutiert sowie eine Entwurfsmethodik für die Prozesspfadgenerierung vorgeschlagen. KW - additive manufacturing KW - continuous fiber KW - composites KW - toolpath Y1 - 2022 ER - TY - CHAP A1 - Maier, Robert A1 - Mottok, Jürgen ED - Trapp, Mario ED - Saglietti, Francesca ED - Spisländer, Marc ED - Bitsch, Friedemann T1 - BayesianSafety - an Open-Source Package for Causality-Guided, Multi-Model Safety Analysis T2 - Computer Safety, Reliability, and Security, 41st International Conference (SAFECOMP 2022): Munich, Germany, September 6–9, 2022, Proceedings T2 - Lecture notes in computer science ; 13414 N2 - Development and verification of modern, dependable automotive systems require appropriate modelling approaches. Classic automotive safety is described by the normative regulations ISO 26262, its relative ISO/PAS 21448, and their respective methodologies. In recent publications, an emerging demand to combine environmental influences, machine learning, or reasoning under uncertainty with standard-compliant analysis techniques can be noticed. Therefore, adapting established methods like FTA and proper tool support is necessary. We argue that Bayesian Networks (BNs) can be used as a central component to address and merge these demands. In this paper, we present our Open-Source Python package BayesianSafety. First, we review how BNs relate to data-driven methods, model-to-model transformations, and causal reasoning. Together with FTA and ETA, these models form the core functionality of our software. After describing currently implemented features and possibilities of combining individual modelling approaches, we provide an informal view of the tool’s architecture and of the resulting software ecosystem. By comparing selected publicly available safety and reliability analysis libraries, we outline that many relevant methodologies yield specialized implementations. Finally, we show that there is a demand for a flexible, unifying analysis tool that allows researching system safety by using multi-model and multi-domain approaches. KW - Package BayesianSafety KW - Causality KW - Bayesian Networks KW - Event Tree Analysis KW - Fault Tree Analysis Y1 - 2022 U6 - https://doi.org/10.1007/978-3-031-14835-4_2 SP - 17 EP - 30 PB - Springer Nature CY - Cham ER -