TY - JOUR A1 - Schmidbauer, Lukas A1 - Lobe, Elisabeth A1 - Schaefer, Ina A1 - Mauerer, Wolfgang T1 - It’s Quick to be Square: Fast Quadratisation for Quantum Toolchains JF - ACM Transactions on Quantum Computing N2 - Many of the envisioned use-cases for quantum computers involve optimisation processes. While there are many algorithmic primitives to perform the required calculations, all eventually lead to quantum gates operating on quantum bits, with an order as determined by the structure of the objective function and the properties of target hardware. When the structure of the problem representation is not aligned with structure and boundary conditions of the executing hardware, various overheads degrading the computation may arise, possibly negating any possible quantum advantage. Therefore, automatic transformations of problem representations play an important role in quantum computing when descriptions (semi-)targeted at humans must be cast into forms that can be “executed” on quantum computers. Mathematically equivalent formulations are known to result in substantially different non-functional properties depending on hardware, algorithm and detail properties of the problem. Given the current state of noisy intermediate-scale quantum (NISQ) hardware, these effects are considerably more pronounced than in classical computing. Likewise, efficiency of the transformation itself is relevant because possible quantum advantage may easily be eradicated by the overhead of transforming between representations. In this paper, we consider a specific class of higher-level representations, that is, PUBOs, and devise novel automatic transformation mechanisms into widely used QUBOs that substantially improve efficiency and versatility over the state of the art. In addition, we conduct a comprehensive investigation of industry-relevant problem formulations and their conversion into a quantum-specific representation, identifying significant obstacles in scaling behaviour and demonstrating how these can be circumvented. KW - Algorithmic optimisation KW - Graphs KW - Performance KW - Pseudo Boolean Function Y1 - 2026 U6 - https://doi.org/10.1145/3800943 N1 - Preprint ebenfalls auf OPUS veröffentlicht: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/7937 VL - 7 IS - 2 PB - ACM ER - TY - CHAP A1 - Schmidbauer, Lukas A1 - Mauerer, Wolfgang T1 - SAT Strikes Back: Parameter and Path Relations in Quantum Toolchains T2 - Proceedings of the IEEE International Conference on Quantum Software (QSW), 07-12 July 2025, Helsinki N2 - In the foreseeable future, toolchains for quantum computing should offer automatic means of transforming a high level problem formulation down to a hardware executable form. Thereby, it is crucial to find (multiple) transformation paths that are optimised for (hardware specific) metrics. We zoom into this pictured tree of transformations by focussing on k-SAT instances as input and their transformation to QUBO, while considering structure and characteristic metrics of input, intermediate and output representations. Our results can be used to rate valid paths of transformation in advance—also in automated (quantum) toolchains. We support the automation aspect by considering stability and therefore predictability of free parameters and transformation paths. Moreover, our findings can be used in the manifesting era of error correction (since considering structure in a high abstraction layer can benefit error correcting codes in layers below). We also show that current research is closely linked to quadratisation techniques and their mathematical foundation. KW - Pseudo Boolean Function KW - PUBO KW - Quantum Software KW - QUBO KW - SAT Y1 - 2025 U6 - https://doi.org/10.1109/QSW67625.2025.00021 SP - 104 EP - 115 PB - IEEE ER - TY - CHAP A1 - Schönberger, Manuel A1 - Trummer, Immanuel A1 - Mauerer, Wolfgang T1 - Hybrid Mixed Integer Linear Programming for Large-Scale Join Order Optimisation T2 - Proceedings of the VLDB Endowment N2 - Finding optimal join orders is among the most crucial steps to be performed by query optimisers. Though extensively studied in data management research, the problem remains far from solved: While query optimisers rely on exhaustive search methods to determine ideal solutions for small problems, such methods reach their limits once queries grow in size. Yet, large queries become increasingly common in real-world scenarios, and require suitable methods to generate efficient execution plans. While a variety of heuristics have been proposed for large-scale query optimisation, they suffer from degrading solution quality as queries grow in size, or feature highly sub-optimal worst-case behavior, as we will show. We propose a novel method based on the paradigm of mixed integer linear programming (MILP): By deriving a novel MILP model capable of optimising arbitrary bushy tree structures, we address the limitations of existing MILP methods for join ordering, and can rely on highly optimised MILP solvers to derive efficient tree structures that elude competing methods. To ensure optimisation efficiency, we embed our MILP method into a hybrid framework, which applies MILP solvers precisely where they provide the greatest advantage over competitors, while relying on more efficient methods for less complex optimisation steps. Thereby, our approach gracefully scales to extremely large query sizes joining up to 100 relations, and consistently achieves the most robust plan quality among a large variety of competing join ordering methods. Y1 - 2026 U6 - https://doi.org/10.14778/3778092.3778097 VL - 19 IS - 3 SP - 348 EP - 360 PB - VLDB Endowment ER - TY - CHAP A1 - Thelen, Simon A1 - Mauerer, Wolfgang T1 - Predict and Conquer: Navigating Algorithm Trade-Offs with Quantum Design Automation T2 - 2025 IEEE International Conference on Quantum Computing and Engineering (QCE), 30 August - 05 September 2025, Albuquerque N2 - Combining quantum computers with classical compute power has become a standard means for developing algorithms and heuristics that are, eventually, supposed to beat any purely classical alternatives. While in-principle advantages for solution quality or runtime are expected for increasingly many approaches, substantial challenges remain: Non-functional properties like runtime or solution quality of many suggested approaches are not yet fully understood, and need to be explored empirically. This, in turn, makes it unclear which approach is best suited for a given problem. Accurately predicting behaviour and properties of quantum-classical algorithms opens possibilities for software abstraction layers, which in turn can automate decisionmaking for algorithm selection and parametrisation. While such techniques find frequent use in classical high-performance computing, they are still mostly absent from quantum software toolchains. In this paper, we present a methodology (accompanied by a reproducible reference implementation) to perform algorithm selection based on desirable non-functional requirements. This greatly simplifies decision-making processes for end users. Based on meta-information annotations at the source code level, our framework traces key characteristics of quantum-classical heuristics and algorithms, and uses this information to predict the most suitable approach and its parameters for given computational challenges and their non-functional requirements. As combinatorial optimisation is a very extensively studied aspect of quantumclassical systems, we perform a comprehensive case study based on numerical simulations of algorithmic approaches to implement and validate our ideas. We develop statistical models to quantify the influence of various factors on non-functional properties, and establish predictions for optimal algorithmic choices without manual user effort. We argue that our methodology generalises to problem classes beyond combinatorial optimisation, such as Hamiltonian optimisation, and lays a foundation for integrated software layers for quantum design automation. KW - Design automation KW - Heuristic algorithms KW - Optimization KW - Prediction algorithms KW - Quantum Computing KW - Runtime KW - Software KW - Software algorithms KW - Source coding KW - Standards Y1 - 2025 U6 - https://doi.org/10.1109/QCE65121.2025.00071 SP - 591 EP - 602 PB - IEEE CY - Los Alamitos, USA ER - TY - CHAP A1 - Krüger, Tom A1 - Mauerer, Wolfgang T1 - Quantum Dark Magic: Efficiency of Intermediate Non-Stabiliserness T2 - 2025 IEEE International Conference on Quantum Computing and Engineering (QCE), 30 August- 05 September 2025, Albuquerque N2 - While quantum systems are know to possess inherent computational advantages over classical computers, constructing algorithms that harness such advantage remains an open challenge. Non-stabiliserness (i.e., traversal of states outside the Clifford orbit), is a necessary condition, as de-quantisation is otherwise possible. Nevertheless, an excess of non-stabiliserness is also known to not be advantageous. In this paper, we present an approach to understanding the efficient use of non-stabiliser states by tracking their behaviour across various algorithms. Our techniques reveal different efficiencies in the use of non-stabiliserness, leading us to hypothesise that greater classical optimisation degrees of freedom can introduce unnecessary non-stabiliser consumption, which becomes costly with error correction. Y1 - 2025 U6 - https://doi.org/10.1109/QCE65121.2025.10461 SP - 592 EP - 593 PB - IEEE ER - TY - INPR A1 - Eichenseher, Vincent A1 - Franz, Maja A1 - Wolff, Christian A1 - Mauerer, Wolfgang T1 - Pattern or Not? QAOA Parameter Heuristics and Potentials of Parsimony N2 - Structured variational quantum algorithms such as the Quantum Approximate Optimisation Algorithm (QAOA) have emerged as leading candidates for exploiting advantages of near-term quantum hardware. They interlace classical computation, in particular optimisation of variational parameters, with quantum-specific routines, and combine problem-specific advantages -- sometimes even provable -- with adaptability to the constraints of noisy, intermediate-scale quantum (NISQ) devices. While circuit depth can be parametrically increased and is known to improve performance in an ideal (noiseless) setting, on realistic hardware greater depth exacerbates noise: The overall quality of results depends critically on both, variational parameters and circuit depth. Although identifying optimal parameters is NP-hard, prior work has suggested that they may exhibit regular, predictable patterns for increasingly deep circuits and depending on the studied class of problems. In this work, we systematically investigate the role of classical parameters in QAOA performance through extensive numerical simulations and suggest a simple, yet effective heuristic scheme to find good parameters for low-depth circuits. Our results demonstrate that: (i) optimal parameters often deviate substantially from expected patterns; (ii) QAOA performance becomes progressively less sensitive to specific parameter choices as depth increases; and (iii) iterative component-wise fixing performs on par with, and at shallow depth may even outperform, several established parameter-selection strategies. We identify conditions under which structured parameter patterns emerge, and when deviations from the patterns warrant further consideration. These insights for low-depth circuits may inform more robust pathways to harnessing QAOA in realistic quantum compute scenarios. Y1 - 2026 U6 - https://doi.org/10.48550/arXiv.2510.08153 ER - TY - INPR A1 - Gierisch, Vincent A1 - Mauerer, Wolfgang T1 - QEF: Reproducible and Exploratory Quantum Software Experiments N2 - Commercially available Noisy Intermediate-Scale Quantum (NISQ) devices now make small hybrid quantum-classical experiments practical, but many tools hide configuration or demand ad-hoc scripting. We introduce the Quantum Experiment Framework (QEF): A lightweight framework designed to support the systematic, hypothesis-driven study of quantum algorithms. Unlike many existing approaches, QEF emphasises iterative, exploratory analysis of evolving experimental strategies rather than exhaustive empirical evaluation of fixed algorithms using predefined quality metrics. The framework's design is informed by a comprehensive review of the literature, identifying principal parameters and measurement practices currently reported in the field. QEF captures all key aspects of quantum software and algorithm experiments through a concise specification that expands into a Cartesian product of variants for controlled large-scale parameter sweeps. This design enables rigorous and systematic evaluation, as well as precise reproducibility. Large sweeps are automatically partitioned into asynchronous jobs across simulators or cloud hardware, and ascertain full hyper-parameter traceability. QEF supports parameter reuse to improve overall experiment runtimes, and collects all metrics and metadata into a form that can be conveniently explored with standard statistical and visualisation software. By combining reproducibility and scalability while avoiding the complexities of full workflow engines, QEF seeks to lower the practical barriers to empirical research on quantum algorithms, whether these are designed for current NISQ devices or future error-corrected quantum systems. Y1 - 2026 U6 - https://doi.org/10.48550/arXiv.2511.04563 ER - TY - JOUR A1 - Weigert, Alexander A1 - Galka, Stefan A1 - Dünnweber, Jan A1 - Meißner, Sebastian A1 - Riege, Jacob A1 - Böck, Hendrik A1 - Wagner, Martin T1 - Simulationsframework mit Anordnungsalgorithmus von Petri-Netzen JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Die serienmäßige Produktion von Elektrolysezellen befindet sich im Anfangsstadium, sodass belastbare Erfahrungen für standardisierte Produktionssysteme fehlen. Die Planung ist daher durch hohe Unsicherheit geprägt. Unterschiedliche Gestaltungsmöglichkeiten der Produktionssysteme müssen frühzeitig bewertet und ihre Leistungsfähigkeit mit dynamischen Methoden, wie der Simulation, abgesichert werden. Anhand eines von den Autoren entwickelten Simulationsframeworks mit automatisierter Modellgenerierung auf Basis der Petri-Netz-Logik zeigt dieser Beitrag die Möglichkeit der Simulation von Produktionssystemen in der Planung. Ein besonderes Leistungsmerkmal des Frameworks ist, dass zunächst unübersichtlich generierte Modelle mit einem Graphenalgorithmus so angeordnet werden, dass ihre Funktionsweise aus der Darstellung nachvollziehbar wird. KW - Continuous Simulation; Framework; Automated Simulation Model Generation; Graph-Layout-algorithm; Petri-Net Y1 - 2026 U6 - https://doi.org/10.1515/zwf-2026-1035 VL - 121 IS - 3 SP - 125 EP - 130 PB - DeGruyter ER - TY - JOUR A1 - Stadler, Anselm A1 - Mohr, Christa T1 - Zwischen Simulation und Realität : Digitale Lernräume in der Pflegeausbildung JF - PADUA N2 - Digitale Lernräume wie Virtual und Augmented Reality verändern die Pflegeausbildung grundlegend. Das europäische Projekt VReduMED, getragen von Partnern aus fünf zentraleuropäischen Ländern, entwickelt immersive Lernformate, die den Theorie-Praxis-Transfer stärken und Lehrende wie Lernende in der digitalen Transformation unterstützen. Der Beitrag zeigt Ansatzpunkte, Ergebnisse und Perspektiven. Y1 - 2026 U6 - https://doi.org/10.1024/1861-6186/a000910 VL - 21 IS - 1 SP - 33 EP - 35 PB - Hogrefe ER - TY - GEN ED - Handels, Heinz ED - Breininger, Katharina ED - Deserno, Thomas M. ED - Maier, Andreas ED - Maier-Hein, Klaus H. ED - Palm, Christoph ED - Tolxdorff, Thomas T1 - Bildverarbeitung für die Medizin 2026 : Proceedings, German Conference on Medical Image Computing, Lübeck March 15–17, 2026 N2 - Die Konferenz "BVM – Bildverarbeitung für die Medizin" ist seit vielen Jahren als die nationale Plattform für den Austausch von Ideen und die Diskussion der neuesten Forschungsergebnisse im Bereich der Medizinischen Bildverarbeitung und der Künstlichen Intelligenz (KI) etabliert. Auch 2026 haben (junge) Wissenschaftler*innen, Industrie und Anwender*innen diesen Austausch vertieft. Die Beiträge dieses Bandes – die meisten davon in englischer Sprache – umfassen alle Bereiche der medizinischen Bildverarbeitung, insbesondere die Bildgebung und -akquisition, Segmentierung und Analyse, Registrierung, Visualisierung und Animation, computerunterstützte Diagnose sowie bildgestützte Therapieplanung und Therapie. Hierbei kommen Methoden des maschinellen Lernens, der biomechanischen Modellierung sowie der Validierung und Qualitätssicherung zum Einsatz. KW - Bildverarbeitung KW - Computerunterstützte Medizin KW - Bildgebendes Verfahren KW - Bildanalyse KW - Deep Learning Y1 - 2026 SN - 978-3-658-51099-2 U6 - https://doi.org/10.1007/978-3-658-51100-5 SN - 1431-472X PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Gutbrod, Max A1 - Rauber, David A1 - Palm, Christoph ED - Handels, Heinz ED - Breininger, Katharina ED - Deserno, Thomas M. ED - Maier, Andreas ED - Maier-Hein, Klaus H. ED - Palm, Christoph ED - Tolxdorff, Thomas T1 - Improving Generalization in Mitotic Cell Detection via Domain Transformations T2 - Bildverarbeitung für die Medizin 2025: Proceedings, German Conference on Medical Image Computing, Lübeck March 15-17, 2026 N2 - We address domain generalization (DG) in mitotic-cell (MC) detection by combining a β-variational autoencoder (VAE) for domain transformations with feature-space alignment together with an object detector. The β-VAE synthesizes domain-transformed images, and the detector is trained to map originals and their transformed counterparts to equal representations. On the MIDOG++ dataset, this approach improves out-of-domain detection F1 scores by 7 and 3 percentage points compared to the color-variation augmentation and stain-normalization baselines. Results further suggest that morphology shifts hinder generalization more than stain shifts. KW - Künstliche Intelligenz KW - Bildverarbeitung Y1 - 2026 U6 - https://doi.org/10.1007/978-3-658-51100-5_71 SP - 362 EP - 367 PB - Springer Vieweg CY - Wiesbaden ER - TY - GEN A1 - Klausmann, Leonard A1 - Rueckert, Tobias A1 - Rauber, David A1 - Maerkl, Raphaela A1 - Yildiran, Suemeyye R. A1 - Gutbrod, Max A1 - Palm, Christoph ED - Handels, Heinz ED - Breininger, Katharina ED - Deserno, Thomas M. ED - Maier, Andreas ED - Maier-Hein, Klaus H. ED - Palm, Christoph ED - Tolxdorff, Thomas T1 - Abstract: DIY Challenge Blueprint BT - from organization to technical implementation in Biomedical Image Analysis T2 - Bildverarbeitung für die Medizin 2025: Proceedings, German Conference on Medical Image Computing, Lübeck March 15-17, 2026 N2 - The high cost of challenge platforms prevents many people from organizing their own competitions. The do-it-yourself (DIY) challenge blueprint [1] allows you to host your own biomedical AI benchmark challenge. Our DIY approach circumvents the current constraints of commercial challenge platforms. A sovereign, extensible and cost-efficient deployment is provided via containerised, identity-managed and reproducible pipelines. Focus lies on GDPR-compliant hosting via infrastructure-as-code, automated evaluation, modular orchestration, and role-based identity and access management. The framework integrates Docker-based execution and standardised interfaces for task definitions, dataset curation and evaluation. All in all it is designed to be flexible and modular, as demonstrated in the MICCAI 2024 PhaKIR challenge [2, 3]. In this case study, different medical tasks on a multicentre laparoscopic dataset with framewise labels for phases and spatial annotations for instruments across fulllength videos were supported. This case study empirically validates the DIY challenge blueprint as a reproducible and customizable challenge-hosting infrastructure. The full code can be found at https://github.com/remic-othr/PhaKIR_DIY. KW - Bildverarbeitung Y1 - 2026 U6 - https://doi.org/10.1007/978-3-658-51100-5_27 SP - 131 EP - 131 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - de Souza Júnior, Luis Antonio A1 - Pacheco, André Georghton Cardoso A1 - Oliveira dos Santos, Thiago A1 - Fogos da Rocha, Wyctor A1 - Bouzon, Pedro Henrique A1 - Palm, Christoph A1 - Papa, João Paulo T1 - LiwTERM-r: a Revised Lightweight Transformer-based Model for Multimodal Skin Lesion Detection Robust to Incomplete Input JF - Journal of the Brazilian Computer Society N2 - As the most common type of cancer in the world, skin cancer accounts for approximately 30% of all diagnosed tumor-based lesions. Early diagnosis can reduce mortality and prevent disfiguring in different skin regions. With the application of machine learning techniques in recent years, especially deep learning, promising results in this task could be achieved, presenting studies demonstrating that the combination of patients’ clinical anamneses and images of the injured lesion is essential for improving the correct classification of skin lesions. Despite that, meaningful use of anamneses with multiple collected images of the same skin lesion is mandatory, requiring further investigation. Thus, this project aims to contribute to developing multimodal machine learning-based models to solve the skin lesion classification problem by employing a lightweight transformer model that is robust to missing clinical information input. As a main hypothesis, models can be fed by multiple images from different sources as input along with clinical anamneses from the patient’s historical evaluations, leading to a more factual and trustworthy diagnosis. Our model deals with the not-trivial task of combining images and clinical information concerning the skin lesions in a lightweight transformer architecture that does not demand high computation resources or even all the information from the anamneses but still presents competitive classification results. KW - Deep learning KW - Skin Lesion Detection KW - Transformers KW - Lightweight Architectures Y1 - 2026 U6 - https://doi.org/10.5753/jbcs.2026.5871 VL - 32 IS - 1 PB - Brazilian Computer Society ER - TY - GEN A1 - Stadler, Sebastian A1 - Cornet, Henriette A1 - Huang, Danqing A1 - Frenkler, Fritz ED - Jung, Timothy ED - tom Dieck, M. Claudia ED - Rauschnabel, Philipp A. T1 - Designing Tomorrow’s Human-Machine Interfaces in Autonomous Vehicles: an Exploratory Study in Virtual Reality T2 - Augmented Reality and Virtual Reality: Changing Realities in a Dynamic World N2 - Technical advances in the automotive industry strive in the direction of full automation. However, besides advantages like improving traffic and fuel efficiency, people do not always trust Autonomous Vehicles (AVs) to make critical decisions. With the ultimate goal of reducing anxiety of passengers of AVs, this explorative study (i) proposes possible design concepts and variants for Human-Machine Interfaces (HMI) for passengers inside the AV using a requirements catalogue, (ii) evaluates the HMI concepts and variants thanks to an experience simulation in Virtual Reality (VR), and (iii) derives the most suitable HMI concept and refines it based on observations of participants’ behaviours during the experience simulation in VR, as well as questionnaires and interviews. The results show that the HMI concepts help passengers to reduce anxiety in the AV. Overall, VR turned out to be a suitable tool for this exploratory study. Further work will focus on testing HMI concepts in a variety of more complex scenarios to ensure user acceptance. Y1 - 2020 SN - 978-3-030-37869-1 U6 - https://doi.org/10.1007/978-3-030-37869-1_13 SP - 151 EP - 160 PB - Springer ER - TY - INPR A1 - Waas, Thomas A1 - Brockmann, R. A1 - Weise, Wolfram T1 - Deeply bound pionic states and the effective pion mass in nuclear systems N2 - We show that the s-wave pion-nuclear potential which reproduces the deeply bound pionic states in Pb, recently discovered at GSI, is remarkably close to the one constructed directly from low energy theorems based on chiral symmetry. Converting this information into an effective pion mass we find $m_\pi^\star/m_\pi\simeq 1.13$ in the center of the Pb nucleus, and $m_\pi^\star/m_\pi\simeq 1.07$ in symmetric nuclear matter. Y1 - 1997 U6 - https://doi.org/10.48550/arXiv.hep-ph/9704397 N1 - Der Aufsatz wurde peer-reviewed veröffentlicht und ist ebenfalls in diesem Repositorium verzeichnet unter: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/8893 ER - TY - JOUR A1 - Stadler, Anselm A1 - Geiger, Andrea A1 - Mohr, Christa T1 - Lernen in digitalen Realitäten : XR als Chance für die Pflegebildung JF - PADUA N2 - Extended Reality (XR) eröffnet neue Möglichkeiten,den Theorie-Praxis-Transfer in der Pflege zu ver-bessern. Der Beitrag zeigt, wie Virtual Reality (VR),Augmented Reality (AR) und Mixed Reality (MR)Lernprozesse unterstützen, welche pädagogischenKompetenzen Lehrende benötigen und welche He-rausforderungen bei der Implementierung zu be-achten sind. Y1 - 2026 U6 - https://doi.org/10.1024/1861-6186/a000922 N1 - Dazugehöriges Literaturverzeichnis: https://doi.org/10.35096/othr/pub-8895 VL - 21 IS - 2 SP - 79 EP - 81 PB - Hogrefe ER - TY - JOUR A1 - Schulz, Carsten A1 - Graneß, Henry A1 - Weinzierl, Stefan A1 - Nicklas, Johannes T1 - Eigenvalue perturbation in drivetrain analysis and redesign JF - Multibody System Dynamics N2 - The optimisation of the dynamic behavior of drive systems often involves targeted modifications of the system characteristics. Structural and parametric modifications are used to satisfy the constraints of the dynamic requirements. However, many optimisations are still achieved by intuition or parameter variations, even though more streamlined and easy-to-implement tools such as the eigenvalue perturbation method are available. In this article, the eigenvalue perturbation method in the form of an eigenvalue sensitivity analysis is used to efficiently optimise the dynamic behavior for two different use cases using different optimisation measures. This paper demonstrates how eigenvalue perturbation theory can efficiently optimise drivetrain dynamics by systematically modifying system parameters. Two case studies show how eigenvalue sensitivity analysis achieves targeted frequency shifts to avoid resonances: (1) adapting shaft stiffness and control parameters in a torsional drivetrain, and (2) adjusting structural modifications in a wind turbine bedplate. The study introduces the eigenvector tensor product as a weighting matrix, identifying key parameters for effective redesign. Compared to conventional parameter studies, this method enables precise control over system dynamics with minimal computational effort, making it highly applicable for vibration mitigation and drivetrain optimisation. Y1 - 2026 U6 - https://doi.org/10.1007/s11044-026-10155-8 SN - 1384-5640 N1 - Corresponding author der OTH Regensburg: Carsten Schulz PB - Springer Nature ER - TY - CHAP A1 - Weinzierl, Stefan A1 - Schulz, Carsten T1 - Digitaler Zwilling einer Doppelschlag-Verlitzmaschine : Digital twin of a double twist stranding machine T2 - 5. VDI-Fachtagung Schwingungen 2025 N2 - Die Methode der Mehrkörpersimulation und die Finite-Elemente-Methode gewinnen aufgrund immer leistungsfähigerer Rechentechnik in Forschung und Entwicklung zunehmend an Bedeutung. Heutzutage können komplexe Systeme mit diesen Methoden virtuell simuliert und multiphysikalisch untersucht werden. Insbesondere im Entwicklungsprozess führt deren Einsatz aufgrund der damit verbundenen Zeit- und Kosteneinsparungen zu einem entscheidenden Wettbewerbsvorteil. Im Rahmen dieser Arbeit wird ein digitaler Zwilling einer bestehenden Doppelschlag-Verlitzmaschine erstellt. Ziel ist die virtuelle Durchführung von Untersuchungen und Schwingungsanalysen. Die wichtigsten Komponenten werden mit flexiblen Eigenschaften unter der Verwendung der Finite-Elemente-Methode integriert, um die Schwingungsfähigkeit des Systems zu simulieren. Um die Effizienz der Simulation zu erhöhen, werden die flexiblen Körper auf ein modales Ersatzmodell reduziert. Darüber hinaus wird die Nachgiebigkeit der Lagerpunkte durch Streifigkeitsmatrizen abgebildet und analysiert. Für die Untersuchung des Hochlaufs und des Dauerbetriebes mit unterschiedlichen Maschinenkonfigurationen wurde ein Auswerteverfahren entwickelt, das die Reproduzierbarkeit und den Vergleich zwischen den einzelnen Tests ermöglicht. Abschließend erfolgt durch den Abgleich mit realen Messungen die Validierung des digitalen Zwillings, wodurch dessen Qualität gesichert und die Vergleichbarkeit zur realen Maschine gewährleistet wird. Y1 - 2025 SN - 9783181024638 U6 - https://doi.org/10.51202/9783181024638-271 SP - 271 EP - 288 PB - VDI Verlag ER - TY - CHAP A1 - Pfingsten, Andrea ED - Kopkow, Christian ED - Elsner, Bernhard T1 - Pain Neuroscience Education bei chronischen Schmerzen T2 - Physiotherapie evidenzbasiert Band 2 KW - Schmerz KW - chronischer Schmerz KW - Physiotherapie KW - Edukation KW - Neuroscience Y1 - 2026 SN - 978-3-45125-6 SP - 93 EP - 95 PB - Elsevier CY - München ER - TY - GEN A1 - Stadler, Anselm A1 - Sattler, Andrea A1 - Mohr, Christa T1 - Literaturliste zum Artikel: Lernen in digitalen Realitäten T2 - Lernen in digitalen Realitäten. XR als Chance für die Pflegebildung. PADUA (2026), 21(2), 10.1024/1861-6186/a000922 N2 - Dies ist das vollständige Literaturverzeichnis zum Zeitschriftenartikel "Lernen in digitalen Realitäten". Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-88958 N1 - Nachweis zur Veröffentlichung ebenfalls auf OPUS: https://opus4.kobv.de/opus4-oth-regensburg/admin/document/index/id/8952 ER - TY - PAT A1 - Hummel, Helmut A1 - Lechner, Alfred T1 - Miniaturized on-line trace analysis [Patentschrift] N2 - The invention relates to a measuring apparatus comprising an apparatus for forming a liquid optical waveguide having a substrate (1) having an at least partially curved closed microchannel (2) having a low-refractive coating (13), whereby there is formed in the substrate (1) at least one feed line (6) for supplying liquid, and whereby there is provided at least at one end of the closed microchannel (2) an apparatus for coupling light axially into the closed microchannel and/or for coupling light axially out of the closed microchannel (2), further comprising a light source (4), a light detector (5), and a first liquid pump (9) which supplies a sample liquid (7) to the closed microchannel (2) via the at least one feed line (6, 6a). Y1 - 2015 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=bibdat&docid=US000008948563B2&zd=1#zd ER - TY - JOUR A1 - Jain, Brijnesh A1 - Schultz, David T1 - Asymmetric learning vector quantization for efficient nearest neighbor classification in dynamic time warping spaces JF - Pattern Recognition N2 - The nearest neighbor method together with the dynamic time warping (DTW) distance is one of the most popular approaches in time series classification. This method suffers from high storage and computation requirements for large training sets. As a solution to both drawbacks, this article extends learning vector quantization (LVQ) from Euclidean spaces to DTW spaces. The proposed generic LVQ scheme uses asymmetric weighted averaging as update rule. We theoretically justify the asymmetric LVQ scheme via subgradient techniques and by the margin-growth principle. In addition, we show that the decision boundary of two prototypes from different classes is piecewise quadratic. Empirical results exhibited superior performance of asymmetric generalized LVQ (GLVQ) over other state-of-the-art prototype generation methods for nearest neighbor classification. Y1 - 2018 U6 - https://doi.org/10.1016/j.patcog.2017.10.029 VL - 76 SP - 349 EP - 366 PB - Elsevier ER - TY - JOUR A1 - Klingl, F. A1 - Waas, Thomas A1 - Weise, Wolfram T1 - Nuclear bound states of omega mesons JF - Nuclear Physics A N2 - Models based on chiral SU(3)_L \otimes SU(3)_R symmetry and vector meson dominance suggest an attractive potential for the $\omega$-meson in a nuclear medium. We discuss the feasibility of producing nuclear bound states of $\omega$-mesons using $(d,^3He)$ and pion induced reactions on selected nuclear targets. Y1 - 1999 U6 - https://doi.org/10.1016/S0375-9474(99)00114-1 VL - 650 IS - 3 SP - 299 EP - 312 PB - Elsevier ER - TY - JOUR A1 - Bürkner, Leonhard A1 - Westner, Markus T1 - KI erfolgreich einführen: Status quo und Erfolgsfaktoren in deutschen Großunternehmen JF - Wirtschaftsinformatik & Management N2 - Viele deutsche Großunternehmen experimentieren derzeit intensiv mit künstlicher Intelligenz (KI), stehen aber vor der Frage, wie sich erste Pilotprojekte in einen nachhaltigen, wirtschaftlich wirksamen Einsatz überführen lassen. Eine empirische Studie mit 34 Chief Information Officers (CIO) und IT-Entscheidern in deutschen Großunternehmen zeigt: 112 identifizierte KI-Use-Cases, ein klar erkennbarer Reifezuwachs – aber auch deutliche Hürden bei Daten, Kompetenzen und Akzeptanz. Der Beitrag fasst den Status quo zusammen, validiert zentrale Erfolgsfaktoren aus der Forschung und leitet konkrete Empfehlungen für die Praxis von IT- und Fachbereichsverantwortlichen ab. KW - Künstliche Intelligenz KW - Generative KI KW - Wirtschaftsinformatik KW - Digitalisierung KW - Management KW - KI-Adoption KW - KI-Einführung KW - KI-Use-Cases KW - KI-Reifegrad KW - Großunternehmen Y1 - 2026 U6 - https://doi.org/10.1365/s35764-026-00593-6 N1 - Corresponding author der OTH Regensburg: Markus Westner PB - Springer ER - TY - JOUR A1 - Sippenauer, Thomas T1 - Bayerische Regionalkonferenz an der OTH Regensburg JF - SPEKTRUM N2 - Kann ein flexibilisierter Einsatz der Stromverbraucher zur Netzentlastung in kritischen Zeitpunkten beitragen und wie ist der aktuell häufig genannte Begriff des „zellulären Ansatzes“ in diesem Zusammenhang zu verstehen? Am 21. September 2018 waren zahlreiche Partner des Projektes C/sells sowie Vertreterinnen und Vertreter von Umweltschutzorganisationen und aus der Politik an der OTH Regensburg zu Gast, um diesen Fragen nachzugehen und mit Experten zu diskutieren. KW - Flexibilisierung, Stromnetz Y1 - 2018 UR - https://www.oth-regensburg.de/fileadmin/Bereiche/Stabsstelle_Kommunikation/Publikationen/Spektrum/Spektrum-2018-2.pdf IS - 2 SP - 29 EP - 29 CY - Regensburg ER - TY - JOUR A1 - Brückl, Oliver A1 - Mayer, Ulrike T1 - Neues Forschungsprojekt für Biogasanlagen gestartet BT - Entwicklung eines Optimierungsmodells JF - SPEKTRUM N2 - Wie können Biogasanlagen nach dem Auslaufen des EEG noch wirtschaftlich betrieben werden? Mit dieser Frage, der Untersuchung der Potenziale und Entwicklung eines Optimierungsmodells für Biogasanlagen im Kontext des zukünftigen Stromsystems beschäftigt sich seit September 2018 ein interdisziplinäres Forscherteam der OTH Regensburg, der OTH Amberg-Weiden und des Instituts für Energietechnik IfE GmbH im Rahmen des Projekts OPTIBIOSY. KW - Biogas, Optimierung Y1 - 2018 UR - https://www.oth-regensburg.de/fileadmin/Bereiche/Stabsstelle_Kommunikation/Publikationen/Spektrum/Spektrum-2018-2.pdf IS - 2 SP - 35 EP - 35 PB - Spektrum CY - Regensburg ER - TY - RPRT A1 - Eichner, Stefan A1 - Grab, Robin A1 - Köppe, Hartmudt A1 - Rauch, Johannes A1 - Schuster, Merten A1 - Scharz, Stefan A1 - Schweiberer, Philipp T1 - Q-Integral - aktives Blindleistungsmanagement mit dynamischen Blindleistungsquellen an der Schnittstelle Verteilungsnetz und Übertragungsnetz : Schlussbericht zum Verbundvorhaben : Berichtsdatum: 01.04.2019-30.09.2022 N2 - Im Zuge der Energiewende müssen bestehende Konzepte des Netzbetriebs und der Netzplanung angepasst und neue entwickelt werden. Mit steigender Anzahl dezentraler Erzeugungsanlagen im Verteilungsnetz nimmt dort das Potenzial zur Blindleistungs- Bereitstellung zu. Unterdessen werden durch den Wegfall von Großkraftwerken auf der HöSEbene Blindleistungsquellen vom Netz genommen, während die Blindleistungsbedarfe durch steigende Blindleistungsanforderungen - insbesondere in der HöS-Ebene - weiter steigen. Unter volkswirtschaftlichen Gesichtspunkten und zur Wahrung der Systemstabilität muss daher künftig mehr Blindleistung aus dem Verteilungsnetz bereitgestellt werden. In Q-Integral wurden diese Herausforderungen angenommen und der Themenkomplex des Blindleistungsmanagements ganzheitlich betrachtet. Im vorliegenden Schlussbericht werden die geleisteten Forschungsarbeiten dargestellt. KW - Blindleistung, Blindleistungsmanagement Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-89308 CY - Braunschweig ER - TY - RPRT A1 - Brückl, Oliver A1 - Brey, Ludwig A1 - Schächinger, Johannes A1 - Henneke, Markus A1 - Eigenstetter, Florian A1 - Vogel, Carolin A1 - Ufkes, Antja T1 - Netzstützung und Systemdienstleistungserbringung durch eine Industriezelle mit Inselnetzfähigkeit und Erneuerbaren Energien : Schlussbericht zum Verbundvorhaben: INZELL : Projektlaufzeit: 01.06.2020-31.12.2023 N2 - Infolge der Verdrängung von konventionellen Großkraftwerken im Kontext nationaler Klimaschutzbemü-hungen entstehen offene Flanken im Bereich der Systemsicherheit. Um weiterhin eine hohe Qualität, Zuverlässigkeit und Sicherheit bei der Stromübertragung und -verteilung zu gewährleisten, müssen ins-besondere: • bei der Bereitstellung von Blindleistung im Übertragungsnetz, wo trotz Zunahme der Vorhaltung steigende Defizite im Blindleistungshaushalt für die Zukunft vorhergesagt werden [1], • der Momentanreserve, die nicht mehr systemimmanent in vielen Erzeugungs- und Bezugsanla-gen vorhanden ist und • dem Netzwiederaufbau (NWA), der bislang mittels Großkraftwerke geplant ist, neue Maßnahmen zum Schließen der Lücken gefunden werden. Aufgrund zunehmend kostensensitiver Fertigungsprozesse bei deutschen Industriebetrieben besteht die Anforderung an eine hohe Zuverlässigkeit der Stromversorgung. Da sowohl länger andauernde Versor-gungsausfälle als auch Spannungseinbrüche des öffentlichen Versorgungsnetzes zu hohen Kosten durch Produktionsstillstand und Schäden führen können, wird auch der Aspekt der Eigenabsicherung bzw. der höheren Versorgungsqualität bedeutender. Des Weiteren sind speziell energieintensive Industrieunter-nehmen gefordert, die zum Teil bisweilen bereits bestehende Eigenerzeugung weiter auszubauen und Flexibilitäten zu erschließen, um unabhängiger von hohen Strombezugskosten zu sein. KW - Inselnetzbetrieb, Industrienetz Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-89261 CY - Regensburg ER - TY - CHAP A1 - Brückl, Oliver A1 - Haslbeck, Matthias A1 - Vogl, Bettina T1 - Interpretation von P-Q-Wolken als Hilfsmittel zur Bewertung von Mittelspannungsnetzen T2 - 4. OTTI Konferenz: Zukünftige Stromnetze 31.01- 01.02.2017, Berlin N2 - Zwischen Übertragungs-/Verteilungsnetzbetreibern bestehen Vereinbarungen in Form von Verträgen und Richtlinien (z.B. DCC), die das zulässige Wirk- und Blindleistungs-Verhalten (P-Q-Verhalten) beschreiben. Beim Blindleistungsverhalten werden i. d. R. zulässige cosφ-Bereiche definiert. Typische Werte sind hierfür cosφ ≤ 0,95 für den I. und II. Quadranten sowie cosφ ≤ 0,925 für den III. Quadranten. Der IV. Quadrant ist unzulässig. Netzstruktur, Verbraucher und Erzeuger beeinflussen das P-Q-Verhalten, weshalb die Einhaltung der cosφ-Grenzwerte bei sich ändernden Faktoren zu prüfen und ggf. Gegenmaßnahmen (z. B. Installation von Kompensationsdrosseln) zu ergreifen sind. Ziel dieser Veröffentlichung ist es, geeignete Parameter zu identifizieren und zu beschreiben, die einen Einfluss auf das P-Q-Verhalten und damit auf die Form der PQ- Wolke einer MS-Netzgruppe (MS-NG) aufweisen. Abbildung 1 zeigt eine beispielhafte P-Q-Wolke. Um die P-Q-Wolken verschiedener MS-Netze vergleichbar zu machen, wurden die P- und Q-Werte auf die jeweilige Bemessungsleistung der versorgenden Umspannwerktransformatoren (UWT) normiert (diese beträgt einheitlich 40 MVA). Die P-Q-Wolke besteht dabei aus allen ¼-h-Messwerten der Summenlast am UWT innerhalb eines Jahres. Als Linien angedeutet sind beispielhaft zulässige cosφ-Grenzen je Quadrant. KW - Blindleistung, P-Q-Wolke, Mittelspannungsnetz Y1 - 2017 ER - TY - CHAP A1 - Hinterreiter, Marion A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Long-term reactive power forecasting power grids – Challenges and methodologies T2 - Applied Research Conference - ARC 04.07.2025, Augsburg N2 - The transition of power systems from fossil fuels to renewable energy sources is driving profound changes across all voltage levels of the electrical grid, altering active power (P) as well as reactive power (Q) behavior. This transformation involves a shift from predominantly top-down, unidirectional electricity flows to bidirectional and increasingly complex flow patterns, fundamentally altering the operation and utilization of power systems. The growing integration of distributed energy resources (DERs), heat pumps (HPs), and electric vehicles (EVs) is particularly impacting lower voltage levels, which are evolving from traditionally consumer-dominated networks into active participants in energy dynamics. These developments have a significant influence on reactive power behavior, with many countries already reporting notable changes due to increased Q contributions from lower voltage levels. As bidirectional flows and decentralized generation increase, understanding and forecasting reactive power trends at these voltage levels becomes essential for ensuring grid stability and efficiency. This paper addresses the challenges of long-term Q forecasting in general by analyzing reactive power behavior in grids, the main influencing grid parameters and introducing existing approaches and concepts, analyzing their applicability, and discussing the associated challenges and methodologies. By shedding light on this underexplored area, the study aims to contribute to the development of advanced long-term reactive power forecasting methods and highlighting research trends. KW - Blindleistungsprognose, long-term, medium voltage grid Y1 - 2025 ER - TY - RPRT A1 - Brückl, Oliver A1 - Eller, Johannes A1 - Habler, Florian A1 - Sator, Tobias A1 - Sippenauer, Thomas A1 - Strohmayer, Bernhard A1 - Stuber, Johannes T1 - Zukünftige Bereitstellung von Blindleistung und anderen Maßnahmen für die Netzsicherheit : Endbericht zum Dienstleistungsauftrag N2 - Der Zweck dieser Studie liegt darin, aufzuzeigen, welche neuen Herausforderungen für den sicheren Netzbetrieb durch den Ausbau der erneuerbaren Energien entstehen und wie diesen zu begegnen ist. Dabei sind praxisnahe Handlungsempfehlungen abzuleiten und Vorschläge für erforderliche Anpassungen zu unterbreiten. Gegenstand der Be-trachtungen sind die - Blindleistung, - Kurzschlussleistung, - Momentanreserve und der - Netzwiederaufbau. Im Fokus dieser Betrachtungen steht allerdings die Bereitstellung der Blindleistung. Konkret soll diese Studie dazu folgende drei Leitfragen beantworten: - Werden die Potenziale der vorhandenen Technologien schon heute kosteneffi-zient genutzt? - Lässt sich mehr Kosteneffizienz durch eine transparentere und mehr marktge-stützte Beschaffung erzielen? - Welche Anreize wären zu setzen, um die notwendige Mindesterzeugung konven-tioneller Kraftwerke zu reduzieren. Alle drei Leitfragen münden letztlich in der übergeordneten Zielsetzung, eine höchst-mögliche Kosteneffizienz bei der Bereitstellung von SDL zu erlangen. KW - Blindleistung Y1 - 2016 UR - https://www.bundeswirtschaftsministerium.de/Redaktion/DE/Publikationen/Studien/zukuenftige-bereitstellung-von-blindleistung-und-anderen-massnahmen-fuer-die-netzsicherheit.pdf?__blob=publicationFile&v=9 ER - TY - RPRT A1 - Brückl, Oliver A1 - Eller, Johannes A1 - Adelt, Christian A1 - Gschossmann, David A1 - Kraus, Hermann A1 - Rauch, Johannes A1 - Sippenauer, Thomas A1 - Susewind, Andreas A1 - Wildfeuer, Matthias T1 - Zukünftige Beschaffung von Blindleistung II : Endbericht zum Dienstleistungsauftrag N2 - Die vorliegende Studie befasst sich mit der Ermittlung des Bedarfs an Blindleistung für das gesamte deutsche Stromnetz auf Grundlage des NEP 2030 (2019) bis zum Jahr 2035. Die Verteilungsnetze werden dabei in ihrem Blindleistungsverhalten möglichst realitätsnah nachgebildet. Neben Maßnahmen zur Senkung des Blindleistungsbedarfs werden Möglichkeiten zur effizienten Deckung aufgezeigt. Darüber hinaus werden die mit der Blindleistungsbereitstellung verbundenen Kosten sowie die Methodik der Be-darfsermittlung beleuchtet. KW - Blindleistung Y1 - 2021 UR - https://www.bundeswirtschaftsministerium.de/Redaktion/DE/Publikationen/Studien/blindleistungsstudie-ii.pdf?__blob=publicationFile&v=1 ER - TY - GEN A1 - Kranz, Michael A1 - Pointner, Daniel A1 - Lehle, Karla A1 - Lubnow, Matthias A1 - Krenkel, Lars T1 - High-resolution flow field investigations in membrane lungs, considering the complex blood rheology T2 - 1st European Fluid Dynamics Conference (EFDC1), 16-20.September 2024, Aachen N2 - Despite major improvements over the last years, coagulative disorders and clotting phenomena in membrane lungs (MLs) are still considerable complications in extracorporeal membrane oxygenation (ECMO). ECMO is an increasingly used treatment for patients with severe respiratory failure or cardiac arrest [1]. For both, evaluation of therapeutic decisions and fundamental research on patient specific intra-device clotting phenomena, the direct visualization and analysis of clot formation in combination with a detailed flow field correlation is highly desirable and therefore an intensively followed research topic. Modelling blood flow and shear induced coagulation in MLs is challenging. The relevant geometry of oxygenator fibers and chaining threads is complex and spans several length scales. In relevant scales and regimes, blood shows several significant non-Newtonian effects. Viscosity impacts shear rate, which is important in several coagulation mechanisms. Additionally, coagulation processes are influencing fluid properties and geometry significantly. Existing approaches of previous research work are only able to consider some, but not all relevant effects and geometrical details. Due to the enormous size of the discretized geometries, highly detailed viscosity and coagulations models are not applicable. Our goal is to develop a model for combined viscosity and coagulation properties of blood flow in MLs. In our work, we compare the influence of different levels of detail of the ML geometry as well as the influence of considering realistic blood flow behavior (viscosity change by considering the local hematocrit distribution within the Fåhraeus-Lindqvist-Effect) on the resulting flow field in relevant subsections of a ML. High-resolution micro-CT geometry reconstructions [1] are compared to idealized generic fiber representations. For realistic blood flow modelling, Newtonian representation is compared to the established Carreau-Yasuda and a multiphase Euler-Euler approach. Results are presented for relevant subsections as well as for the complete ML. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-89214 ER - TY - GEN A1 - Kranz, Michael A1 - Wagner, Maria Stella A1 - Pointner, Daniel A1 - Waldbauer, Selina A1 - Müller, Thomas A1 - Lubnow, Matthias A1 - Foltan, Maik A1 - Krenkel, Lars A1 - Lehle, Karla T1 - Polymeric Embedding of Membrane Lungs: A Novel Method for Histological Investigations of Intra-Device Clot Formation T2 - 12th EuroELSO Congress, 24-27. April 2024, Krakow Y1 - 2024 ER - TY - GEN A1 - Köster, Leonie A1 - Kranz, Michael A1 - Wagner, Maria Stella A1 - Foltan, Maik A1 - Müller, Thomas A1 - Lubnow, Matthias A1 - Krenkel, Lars A1 - Lehle, Karla T1 - Histological Investigations of Intra-Device Clot Formation in ECMO Pumps T2 - 12th EuroELSO Congress, 24-27. April 2024, Krakow Y1 - 2024 ER - TY - GEN A1 - Kranz, Michael A1 - Wagner, Maria Stella A1 - Krenkel, Lars A1 - Müller, Thomas A1 - Lubnow, Matthias A1 - Philipp, Alois A1 - Lehle, Karla T1 - Clot Localization within Membrane Lungs using different Imaging Methods and Histological Clot Characterization as a way to prevent Thrombosis in Extracorporeal Membrane Oxygenation Y1 - 2023 VL - 2023 ER - TY - JOUR A1 - Lambert, Jerry A1 - Kraus, Hermann A1 - Doepfert, Markus A1 - He, Miaomiao A1 - Gschossmann, David A1 - Ceruti, Amedeo A1 - Nemeth, Isabell A1 - Brückl, Oliver A1 - Hamacher, Thomas A1 - Spliethoff, Hartmut T1 - Assessing the techno-economic impact of district heating on electrical distribution grid reinforcements JF - Advances in Applied Energy N2 - Enhanced sector coupling across electricity, mobility, and heating sectors leads to higher efforts for distribution grid upgrades. Based on a case study, this paper evaluates the role of district heating networks in reducing electrical distribution grid reinforcements and compares their economic viability against a building-specific heat supply using heat pumps. A detailed energy system model is used to analyze two building energy renovation scenarios: a business-as-usual scenario with a 1 % annual renovation rate and an ambitious scenario with a rate of 2 %. Using a two-step optimization, the impact of different district heating network penetration levels on the distribution grid is evaluated, followed by an ex-post analysis to incorporate a simultaneity factor into district heating networks. Overall, district heating networks can reduce distribution grid reinforcements, but the associated savings alone do not justify their construction, particularly in the ambitious renovation scenario. In the business-as-usual scenario, a district heating network can reduce reinforcement costs by up to 71 %. However, in the ambitious scenario, grid reinforcements are already reduced due to lower heat peak demand, and the maximal reinforcement cost savings only amount to 35 %. Compared economically, district heating networks are cost-competitive with building-specific heating only in the business-as-usual scenario, up to a heat supply share of 70 % and in the ambitious scenario, up to 40 %. In both scenarios, a district heating network can be a robust solution to lower macroeconomic costs for a carbon-neutral heat supply. KW - Energy system optimization KW - Distribution grid KW - Grid reinforcement KW - District heating KW - Benchmark Y1 - 2025 U6 - https://doi.org/10.1016/j.adapen.2025.100251 SN - 2666-7924 VL - 20 PB - Elsevier ER - TY - JOUR A1 - Bernal, Susan A. A1 - Angst, Ueli M. A1 - Provis, John L. A1 - Thiel, Charlotte A1 - Gluth, Gregor J. G. A1 - Villagran-Zaccardi, Yury A1 - De Belie, Nele T1 - Recommendation of RILEM TC 281-CCC: RILEM CPC-18R1 - guideline for measuring the carbonation depth of hardened concrete using a pH indicator solution JF - Materials and Structures N2 - This recommendation provides a procedure for determining the carbonation depth on the surface of concrete by applying a pH indicator. This includes definitions of carbonation, carbonation depth and carbonation front, as well as descriptions of the different pH indicator solutions that can be used. Recommendations for testing laboratory-prepared specimens and those obtained from concrete structures are also given. This involves guidelines for sample preparation and/or extraction, CO2 exposure duration, carbonation depth determination and reporting of results. A section on data interpretation is also provided, as carbonation results are used for determining durability of concrete, as well as a criterion for materials selection or for carbon uptake calculations. The new Recommendation CPC-18R1 is intended to supersede the former RILEM recommendation CPC-18, particularly when prescribed as the preferred method for evaluating and reporting carbonation depths. KW - Carbonation KW - Carbonation depth KW - Carbonation front KW - pH indicator KW - RILEM CPC-18 KW - Test method Y1 - 2026 U6 - https://doi.org/10.1617/s11527-026-02966-0 SN - 1359-5997 VL - 59 PB - Springer ER - TY - GEN ED - Dillmann, Andreas ED - Heller, Gerd ED - Krämer, Ewald ED - Breitsamter, Christian ED - Wagner, Claus ED - Krenkel, Lars T1 - New Results in Numerical and Experimental Fluid Mechanics XV : Contributions to the 24th STAB/DGLR Symposium, Regensburg, Germany, 2024 T2 - Notes on Numerical Fluid Mechanics and Multidisciplinary Design N2 - This book offers timely insights into research on numerical and experimental fluid mechanics and aerodynamics. It reports on findings by members of the Deutsche Strömungsmechanische Arbeitsgemeinschaft, STAB (German Aerodynamics/Fluid Mechanics Association) and the Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal Oberth e.V., DGLR (German Society for Aeronautics and Astronautics) and covers both nationally and EC-funded projects. Continuing on the tradition of the previous volumes, the book highlights innovative solutions, promoting translation from fundamental research to industrial applications. It addresses academics and professionals in the field of aeronautics, astronautics, ground transportation, and energy alike. Y1 - 2026 SN - 978-3-032-11114-2 U6 - https://doi.org/10.1007/978-3-032-11115-9 VL - 156 PB - Springer CY - Cham (CH) ER - TY - CHAP A1 - Kranz, Michael A1 - Pointner, Daniel A1 - Wagner, Maria Stella A1 - Lubnow, Matthias A1 - Lehle, Karla A1 - Krenkel, Lars ED - Dillmann, Andreas ED - Heller, Gerd ED - Krämer, Ewald ED - Breitsamter, Christian ED - Wagner, Claus ED - Krenkel, Lars T1 - High-Resolution Flow Investigations in Membrane-Lungs for Understanding Shear-Induced Blood Clot Formation T2 - New Results in Numerical and Experimental Fluid Mechanics XV : Contributions to the 24th STAB/DGLR Symposium, Regensburg, Germany, 2024 N2 - Complex blood flow phenomena in membrane lungs (MLs) play a crucial role in intra-device clot formation and the occurrence of thromboembolic events. At present, however, the local flow conditions within an ML are not yet sufficiently known. The aim was to gain a deeper understanding of local flow regimes inside MLs by performing highly resolved computational fluid dynamics (CFD) of generic and native fiber mat bundles. Straight cylinders with a diameter of 380 μm in parallel arrangement were the foundation of the generic model. For validation, a method for reconstructing a native geometry from a microcomputed tomography (μCT) scan was established, with both models used for CFD. While the generic model showed a symmetrical flow regime without indicating any pathological flow, the native model did show an irregular fiber arrangement and no symmetrical flow regime. In conclusion, the fiber arrangement significantly affects the local flow regimes inside MLs. KW - CFD KW - ECMO KW - membrane lung KW - ML KW - µCT Y1 - 2026 U6 - https://doi.org/10.1007/978-3-032-11115-9_12 SP - 125 EP - 134 PB - Springer CY - Cham ER - TY - THES A1 - Sauter, Alexandra T1 - Gesundheitsverhalten und Zugang zu Präventionsangeboten bei Personen mit syrischem Migrationshintergrund - Ergebnisse einer longitudinalen qualitativen Studie N2 - Migration prägt die zweite Dekade des 21. Jahrhunderts in Europa. Eine der Hauptursachen ist der seit 2011 schwelende syrische Bürgerkrieg, welcher maßgeblich die gesellschaftliche und politische Diskussion in Europa und insbesondere Deutschland prägt. Syrische Migrant:innen bilden die größte Gruppe registrierter Asylsuchender und insgesamt die drittgrößte Ausländergruppe in Deutschland. Damit stellen sie eine relevante und neue Bevölkerungsgruppe für die Prävention und Gesundheitsförderung dar. Bisherige Forschung zur Gruppe der syrischen Migrant:innen fokussiert primär auf die psychische Gesundheit. Unklar ist, wie sich einzelne Gesundheitsverhalten dieser Bevölkerungsgruppe, z.B. bezogen auf Ernährung und Bewegung, zu Beginn des Aufenthaltes in Deutschland verhalten und wie sich diese Verhaltensweisen mit zunehmendem Aufenthalt verändern. Die vorliegende Arbeit hat diese Forschungslücke aufgegriffen und folgende Forschungsfragen zu a) dem Stellenwert von Gesundheit und Gesundheitsförderung; b) den Einflussfaktoren auf gesundheitsbezogene Verhaltensweisen; c) dem Zugang zu Präventionsangeboten; d) unterstützenden sozialen und strukturellen Rahmenbedingungen im Alltag der syrischen Migrant:innen gestellt. Zur Beantwortung der Forschungsfragen wurde ein qualitativ-exploratives Forschungsdesign gewählt, welches dem sozialwissenschaftlichen Ansatz der Grounded Theory nach Glaser und Strauss zugrunde liegt. Die Arbeit umfasst eine longitudinale leitfadengestützte Interviewstudie mit der Zielgruppe zu zwei Zeitpunkten (t₀ n=30, t₁ n=17) sowie eine Fokusgruppenbefragung mit 24 Expert:innen aus dem Bereich der migrationsspezifischen Gesundheitsförderung. Die Narrative der beiden Studien lassen einen zeitlichen Verlauf erkennen, in welchem die eigene Gesundheit sowie gesundheitsförderliche Verhaltensweisen eine unterschiedlich starke Gewichtung im Alltag der Migrant:innen einnehmen. Anhand der Ergebnisse lassen sich drei Phasen formulieren, welche syrische Migrant:innen in ihren ersten Aufenthaltsjahren im Gastland durchlaufen. Die erste Phase ist durch Behördengänge geprägt, um administrative und rechtliche Sachverhalte zu klären, wodurch der eigenen Gesundheit sowie gesundheitsförderlichen Verhaltensweisen wenig Relevanz zugeschrieben wird. Der Übergang von einer ersten hin zu einer zweiten Phase stellt für viele Migrant:innen einen Umbruch dar. Viele erleben in dieser Phase zahlreiche Förderfaktoren, um gesundheitsförderliche Verhaltensweisen stärker in den Alltag zu integrieren, wie beispielsweise neue Zukunftsperspektiven im Gastland oder westliche Verhaltensnormen. Aufgrund des doppelten biographischen Bruches, welcher mit der Migration nach Deutschland und dem damit verbundenen Auszug aus dem Elternhaus durchlaufen wird, erleben viele Migrant:innen auch Barrieren, um gesundheitsförderliche Verhaltensweisen in gewünschtem Umfang umzusetzen. Die soziale Umgebung (z.B. Mitbewohner:innen, Angehörige, Helferkreise) kann dabei eine wichtige Stütze sein, um gesundheitsbezogene Verhaltensweisen aufrechtzuerhalten. Im Übergang von Phase 2 zu Phase 3 können gesundheitsrelevante Verhaltensweisen etabliert und in die gefestigteren Alltagsabläufe der Migrant:innen eingebunden werden. In Phase 3 ist der Alltag geprägt durch das Absolvieren einer (akademische) Ausbildung oder einer Erwerbstätigkeit, welche aufgrund der neuen Sprache als anspruchsvolle Aufgaben gewertet wurde. Die Bewältigung traumatischer Flucht- und Migrationserlebnisse sowie hoher Akkulturationsanforderungen in einem fremden Land erfordern des Weiteren die völlige Aufmerksamkeit der Migrant:innen. Diese beiden Faktoren können zu einer geringeren Priorisierung gesundheitsförderlicher Verhaltensweisen führen. Der (gemeinsame) Verzehr heimischer Gerichte, kann als kurzeitige Ausflucht aus den psychischen Belastungen fungieren. Auch regelmäßige körperliche Aktivität stellt für manche ein geeigneter Coping-Mechanismus dar, um besser mit belastenden Ereignissen umgehen zu können. Für andere stellt die mentale Situation eine zu große Barriere da, um regelmäßig körperlich aktiv zu ein. Anhand der Ergebnisse wurden nach dem Paradigma „health in all policy“ der Gesundheitsförderung, elf multisektorial angesiedelte Handlungsempfehlungen für Politik und Praxis formuliert. Sowohl in Politik als auch Public-Health-Praktiken müssen die spezifischen Bedürfnisse syrischer Migrant:innen stärker eingebunden werden und unterstützende gesellschaftliche Strukturen in der Lern- und Arbeitswelt, als auch der sozioökonomischen und physischen Umwelt dieser Bevölkerungsgruppe geschaffen werden. Zukünftige Forschung sollte sich weiterhin mit den Lebensbedingungen syrischer Migrant:innen und deren Auswirkungen auf gesundheitsrelevante Verhaltensweisen konzentrieren. Aufgrund des anhaltenden Konfliktes in Syrien ist ein fortdauernder Aufenthalt der Zielgruppe in Deutschland anzunehmen, welcher über die in der Arbeit beschriebenen drei Phasen hinausgehen kann. N2 - Migration movements from the Middle East to Europe are characterizing the second decade of the 21st century in Europe. One of the main causes is the since 2011 ongoing Syrian civil war, which has had a significant impact on the social and political discussion in Europe and especially in Germany. Syrian migrants are the largest group of registered asylum seekers and the third largest group of foreigners in Germany. They represent a relevant and new population group for the field of preventive medicine and health promotion. Previous research on Syrian migrants has primarily focused on mental health issues. Thus, little is known about the health behavior of this population group, especially regarding nutrition and physical activity, and how it might change with increasing length of stay in the host country. The present thesis has addressed this research gap and posed research questions on a) the significance of health and health behavior; b) the factors influencing health behavior; c) access to preventive services; d) supportive social and organizational conditions in the everyday lives of Syrian migrants. To answer these research questions, a qualitative-explorative research design was chosen, which is based on grounded theory methodology. The thesis comprises a longitudinal qualitative interview study with Syrian migrants with a follow-up after 12 months (t₀ n=30, t₁ n=17) as well as a focus group study with 24 experts from the field of migration-specific health promotion. The narratives of the two studies reveal a temporal course in which the Syrian migrants' own health and health-promoting behaviors take on different considerations in their everyday lives. Based on the results, three phases could be derived which Syrian migrants underwent during their first years of residence in the host country. The first phase is characterized by visits to the authorities to clarify administrative and legal matters, which means that little relevance is attributed to their own health or health-promoting behaviors. The transition from the first to the second phase represents a radical change for many migrants. In this phase, many experience numerous supportive factors which help them to integrate health-promoting behaviors more strongly into everyday life, such as new future perspectives or westernized behavioral patterns. However, due to the double biographical break that Syrian migrants go through with their migration to Germany and the associated departure from their parental home, many migrants also experience some barriers in implementing health-promoting behaviors. The social environment (e.g. flat mates, relatives, volunteers) can be an important support in maintaining health-related behaviors. In the transition from phase 2 to phase 3, health-related behaviors can be established and integrated into the migrants' more established daily routines. In phase 3, everyday life is characterized by the completion of (academic) training or gainful employment, which was rated as challenging task due to the foreign language. Coping with traumatic flight and migration experiences as well as high acculturation demands in a foreign country also require the complete attention of the migrants. This can lead to a lower prioritization of health-promoting behaviors. Eating traditional Syrian food (together with peers) can act as a temporary escape from mental distress. Some migrants reported to suffer from fatigue and lack of energy and motivation to be physically active. Whereas others felt that physical activity was as a way of distracting them from their daily worries. Based on the results, eleven multisectoral implications for future policy and practice were formulated according to the "health in all policy" paradigm of modern health promotion. Prospectively, political as well as public health efforts must increasingly address the specific needs of Syrian migrants and create supportive social structures in the learning and working environment as well as the socio-economic and physical environment of the migrants. Future research should continue to focus on the living conditions of Syrian migrants and their impact on health-related behaviors. Due to the ongoing conflict in Syria, it can be assumed that the target group will continue to stay in Germany, which may go beyond the three phases described in this thesis. KW - Qualitative Sozialforschung KW - Migrationssoziologie KW - Syrien KW - Prävention KW - Gesundheitsförderung KW - Ernährung KW - Bewegung KW - Syria KW - Health Promotion KW - Qualitative Research KW - Migration KW - Physical Activity KW - Nutrition KW - Health Behavior KW - Immigrant Health Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:355-epub-478673 ER - TY - CHAP A1 - Pozzobon, Enrico A1 - Weiß, Nils A1 - Mottok, Jürgen A1 - Matoušek, Václav T1 - Fuzzy fault injection attacks against secure automotive bootloaders T2 - 21th escar Europe : The World's Leading Automotive Cyber Security Conference (Hamburg, 15. - 16.11.2023) N2 - Secure embedded bootloaders are the trust anchors for modern vehicles’ software. The secure software update process of ECUs is well-defined across the entire automotive industry. Every OEM has his own implementation, but follows the general software update process. This paper demonstrates code execution attacks by combining software and hardware weaknesses in secure automotive bootloaders. The attack can be performed entirely automated, no static code analysisis required. Random fault injection parameters were sufficient to obtain code execution in a reasonable time. All experiments were conducted with electromagnetic fault injection and without any hardware modifications of the targets. We successfully performed our attack on two entirely different gateway Electronic Control Units (ECUs) used in current vehicles (at the time of this research) from Volkswagen and BMW. As a result of this attack, consisting of a combination of a hardware and asoftware attack, the general secure software update process used in the automotive industry needs to be revised. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:294-103817 PB - Ruhr-Universität Bochum ER - TY - CHAP A1 - Schröpfer, Johannes A1 - Schwägerl, Felix A1 - Westfechtel, Bernhard T1 - Consistency control for model versions in evolving model-driven software product lines T2 - 2019 ACM/IEEE 22nd International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), Munich, Germany N2 - Model-driven software product lines evolve in both time and space. Consistency control for model versions constitutes a key challenge. We propose a novel approach to consistency control called well-formedness analysis and repair: Instead of attempting to guarantee consistency of each configurable version a priori (which is hard and restrictive), consistency is controlled only when a product version is actually configured. Conflicts, i.e., violation of well-formedness constraints, are detected and repaired, driven by configurable strategies. This approach is generic; it is instantiated for feature models (for the variability model) and EMF models (as domain artifacts). Y1 - 2019 U6 - https://doi.org/10.1109/MODELS-C.2019.00043 SP - 268 EP - 277 PB - IEEE ER - TY - CHAP A1 - Greiner, Sandra A1 - Schwägerl, Felix A1 - Westfechtel, Bernhard T1 - Realizing multi-variant model transformations on top of reused ATL specifications T2 - Proceedings of the 5th International Conference on Model-Driven Engineering and Software Development MODELSWARD, Porto, Portugal N2 - Model transformations are crucial in model-driven software engineering (MDSE). While combining MDSE and software product line engineering (SPLE) techniques, summarized as model-driven product line engineering (MDPLE), promises increased productivity by relying on organized reuse, the benefits are impeded by transformation specifications designed exclusively for single-variant models. Applying single-variant model transformations to multi-variant input models results in output models lacking the variability information. Multi-variant model transformations (MVMT), which preserve variability information, have only recently been understood as an explicit research problem. In this paper, we propose an a posteriori approach towards MVMT. Following the paradigm of organized reuse, we propose to employ single-variant model transformations without modifications in a first step, and to transfer variability information afterwards based on the artifacts provided by the single-variant transformation specification. In particular, we implemented this approach for the well-known model-to-model transformation language ATL. To deduce variability information, the execution artifacts (trace and execution model) are analyzed. Then, variability annotations are transfered to the target model automatically. The implementation is evaluated based on a practically example of a Graph product line. Results exhibit that our approach outperforms the conventional solution with respect to user effort, accuracy and performance. Y1 - 2017 U6 - https://doi.org/10.5220/0006137803620373 VL - 1 SP - 362 EP - 373 PB - SCITEPRESS - Science and Technology Publications ER - TY - THES A1 - Schedlbauer, Jürgen T1 - Anforderungsorientierte Optimierung, Evaluation und Validierung der praktischen Inhalte der Lehre in der Medizinischen Informatik in Hochschulen für Angewandte Wissenschaften (HAW) N2 - Die European University Association (EUA) definiert „Beschäftigungsfähigkeit“ als ein Hauptziel der Hochschulausbildung. Der zentrale Aspekt dieser Arbeit ist, kompetenzorientierte Lehre in der praktischen Ausbildung der medizinischen Informatik an Hochschulen für angewandte Wissenschaft(HAW) durch Analyse der Kompetenzanforderungen des Marktes und der Hochschulen zu optimieren. Als Erstes wird dazu ein Berufsbild der Medizinischen Informatik erarbeitet, indem mit Hilfe von Webcrawling, Webextraktion und Text Mining Begriffe von Stellenanzeigen, anhand einer Inhaltsanalyse, die Kompetenzen im Bereich Fachwissen und Soft Skills (Geschäftsprozessmanagement, Teamwork, Prozesse, Lern- und Problemlösungsfähigkeiten) ermittelt werden. Als Nächstes wird untersucht, inwiefern HAWs diese Kompetenzen in ihren Modulhandbüchern als Lernziele definieren. Um die Vermittlung der praktischen Inhalte der Ausbildung entsprechend dem Berufsbild zu optimieren wurde - basierend auf der Methodik des Design-based Research - die Lehrmethodik „INstall“ entwickelt und evaluiert um die Arbeitsmarktfähigkeit der Studierenden zu verbessern. Die Eignung der Lehrmethodik wurde anhand einer Fremd- und Selbsteinschätzung der Studierenden untersucht. Die Ergebnisse der Stellenanalyse zeigen, dass nur 45% der Begriffe der Kategorie Fachwissen und 55% der Kategorie Soft Skills zuzuordnen sind. Die vorherrschenden Begriffe waren Programmierung, Erfahrung, Projekt und Server. Die Auswertung der Modulhandbücher zur Kompetenzorientierung hat große Unterschiede offengelegt, da in zwei Dritteln der Modulhandbücher keine Soft Skills als Lernergebnisse formuliert wurden. Anhand eines Zyklus über drei Vorlesungen wurde nachgewiesen, dass die Erweiterung der Lernziele auf Soft Skills durch die Methode „INstall“, in der Fremd- und Selbsteinschätzung der Studierenden einen starken Zugewinn an Kompetenzen im fachlichen Wissen, bei der Teamarbeit, im Geschäftsprozessmanagement, beim Lernen, in der Kommunikation und der Problemlösung gebracht hat. Die Arbeit legt den Schluss nahe, dass Hard- und Soft Skills bei den Arbeitnehmeranforderungen zur Medizinischen Informatik gleich gewichtet sind. Daraus kann abgeleitet werden, dass die Vorgaben der Berufsverbände zum Kompetenzprofil überdacht werden sollten. Fraglich erscheint, ob ein großer Teil der Modulhandbücher den Vorgaben der EUA (Beschäftigungsfähigkeit) entsprechen, da die Lernziele ein Defizit an Soft Skills aufweisen. Insgesamt bleibt festzuhalten: Eine gezielte Ausrichtung der Lernziele von Übungen auf die Anforderungen des Arbeitsmarktes durch die neue Lehrmethode „INstall“ hat zu einer von den Studierenden selbst bestätigten spürbaren Steigerung der benötigten Kompetenzen geführt. N2 - The European University Association (EUA) defines employability as a primary goal of higher education. The central aspect of this work is to optimize competence-oriented teaching in the practical training of medical informatics at universities of applied science (HAW) by analyzing and comparing the competence requirements of the market and universities. First, a professional profile of medical informatics was developed by using web crawling, web extraction and text mining to determine the competencies in the field of specialist knowledge and soft skills (business process management, teamwork, processes, learning and problem-solving skills) on the basis of a content analysis . Following this, several HAWs were examined in order to ascertain to what extent they define these competencies as learning objectives in their module handbooks. In order to optimize both the communication of the training‘s practical content according to the job description and student employability, a teaching method – „INstall“ - based on the methodology of design-based research - was developed and evaluated . The suitability of this teaching methodology was examined on the basis of external and self-assessment by students taking part in a lecture tailored to make use of the new learning goals. The results of the job analysis show that only 45% of the terms found in the professional profile can be assigned to the specialist knowledge category and 55% to the soft skills category. The predominant terms were programming, experience, project and server. Evaluating the module handbooks on competence orientation revealed major differences, as two thirds failed to formulate them as learning outcomes . On the basis of a cycle of three lectures, it was demonstrated that – in the external and self-assessment of partaking students - the expansion of learning objectives with soft skills via the „INstall“ method led to a strong gain in technical knowledge, teamwork, business process management, learning, communication and problem-solving competencies. Another important finding is that hard and soft skills are equally weighted in the employee requirements for medical informatics. This observation may support the proposal that the requirements of the professional associations for the competence profile should be reconsidered. When considering the learning objectives‘ lack of soft skills , it is questionable whether a large part of the module handbooks meet the requirements of the EEA (employability). The findings clearly indicate that a targeted alignment of the learning objectives of exercises with the requirements of the job market through the new teaching method „INstall “ has led to a noticeable increase in the required competencies, which the students themselves confirmed. KW - Web crawling KW - Text mining KW - Competence-based education KW - Soft skills KW - Medical Informatics Graduate employability Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:355-epub-477509 SN - 978-3-88246-461-0 ER - TY - THES A1 - Schmid, Isabel T1 - Weiterentwicklung von Methoden und Ansätzen zur automatisierten Informationsextraktion aus Social Networks N2 - Ob Werbebotschaften effektiv in einem sozialen Netzwerk verbreitet werden können, ist abhängig von der Person, die dabei als Multiplikator eingesetzt wird (Deng et al., 2016). Der Einsatz eines einflussreichen Nutzers kann nicht nur die Reichweite der Marketingbotschaft deutlich erhöhen, sondern auch in den Bereichen Innovations- und Produktmanagement wirken. Neben der großen praktischen Relevanz des Themengebiets hat dieses auch in der Wissenschaft eine Vielzahl an Publikationen hervorgebracht. Eine klare Definition und Abgrenzung einflussreicher Nutzertypen wie z.B. Influencer, Key User oder Lead User fehlt bislang und soll mit Hilfe eines ausführlichen Literaturüberblicks angefertigt werden (Veröffentlichung 1). Außerdem wird im Rahmen der Dissertation die Identifikation von Lead User weiterentwickelt, indem verschiedene Analyseformen wie z.B. die SNA, die Sentimentanalyse und das Topic Modeling miteinander kombiniert werden. Das Thema der Sentimentanalyse wird zudem in einer weiteren Veröffentlichung näher betrachtet, insbesondere im Zuge der Analyse langer und unstrukturierter Texte. Jedoch lassen sich Vorteile von sozialen Netzwerken nicht nur in Bezug auf die Verbindung zwischen Kunde und Unternehmen feststellen, sondern auch im Bereich ESN. ESN werden mit dem Ziel angewandt, die organisationale Effektivität sowie die Effizienz im Unternehmen zu verbessern (Stei et al., 2016). Zentral dabei ist, dass die Mitarbeiter dazu motiviert werden, aktiv Inhalte zu erzeugen und ihr Wissen mit anderen zu teilen (Günther and Spath, 2010). Hierbei lassen sich auch unter den Mitarbeitern unterschiedliche Nutzergruppen erkennen. So können u.a. aufgrund von Aktivität und Zentralität im Netzwerk Nutzertypen voneinander unterschieden werden. Zentrale Personen im Netzwerk müssen gefördert werden, um Kommunikation und Kollaboration zu sichern. Deshalb stehen die sog. „value-adding user“ im Zentrum der Analyse einer weiteren Publikation. N2 - The dissertation "Development of methods and approaches for automated information extraction from social networks" deals with the analysis of social media network data. Besides the distinction and characterization of different influential user types in social media networks, found in the research literature, the focus is on the (automated) identification of different influential user types applying various methods for analyzing the structured and unstructured social media data. In addition to the characterization and identification of influential users, this dissertation also concentrates on the analysis of textual social media network data. Thus, a comparison between different topic modeling techniques is performed in order to provide recommendations for several application scenarios. Furthermore, requirements for a trend analysis tool are collected. Based on these, software tools for the automated analysis of textual social media content (considering aspect-based sentiment analysis) were created and evaluated. Further research activities aim at deriving design approaches for the social media strategy regarding socially relevant topics (such as sustainability) by analyzing social media network data. KW - Social Media Network KW - Nutzertypen KW - Social Media Analyse Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:355-epub-534918 ER - TY - THES A1 - Schmoll, Annemarie T1 - Zugeschriebene Geschlechterrollenbilder und Krise der männlichen Herrschaft im Feld des Hooliganismus N2 - Ob sich der Hooliganismus, einem Feld der „ernsten Spiele des Wettbewerbs“, in welchem die männliche Herrschaft herrscht, vor dem Hintergrund von weitreichenden sozialen Wandlungsprozessen in einer Krise befindet, da emanzipatorische Fortschritte eingetreten sind und eine gewisse Anzahl von Frauen am Hooliganismus gewaltförmig beteiligt ist und welche Geschlechterrollenbilder dort zugeschrieben werden, ist Gegenstand der vorliegenden Arbeit. Diese und weitere Forschungsfragen werden aus der Innenperspektive der im Feld des Hooliganismus Befindlichen mit Hilfe der Forschungsstrategie der soziologischen Ethnographie beantwortet. N2 - Whether hooliganism, a field of "serious games of competition" in which masculine domination prevails, is in crisis against the background of far-reaching processes of social change, since emancipatory progress has occurred and a certain number of women are violently involved in hooliganism, and which gender role images are ascribed there, is the subject of the present work. These and other research questions are answered from the internal perspective of those in the field of hooliganism with the help of the research strategy of sociological ethnography. KW - Bourdieu KW - Gender KW - Geschlechterbilder KW - Geschlechterstereotype KW - Hooligans KW - Machismo KW - Männerbund KW - männliche Herrschaft KW - Hooliganismus KW - Fußball KW - weibliche Hooligans KW - Innenperspektive KW - Krise der männlichen Herrschaft KW - zugeschriebene Geschlechterrollenbilder KW - qualitative Forschung Y1 - 2022 SN - 978-3-7489-3283-3 SN - 978-3-8487-7492-0 PB - Nomos CY - Baden-Baden ET - 1. ER - TY - THES A1 - Schwarz, Colin Maximilian T1 - Indirekte modellprädiktive Regelung von Windenergieanlagen sowie deren energie-optimale und deren schädigungsarme Konfiguration N2 - Die vorliegende Arbeit beschäftigt sich mit der Anwendung der indirekten Methoden zur automatisierten Lösung von einer bestimmten Klasse von Optimalen Steuerungsproblemen im Rahmen einer modellprädiktiven Regelung für Windenergieanlagen. In einem zweiten Teil wird der Einfluss dieser Regelungsmethode auf die Festigkeit des Triebstranges untersucht. Diese führt zu einer überproportionalen Beanspruchung und damit zu einer Reduktion der Betriebsfestigkeit. Es gilt entsprechende Randbedingungen für die der Regelung zugrunde liegenden Optimalen Steuerungsprobleme zu finden, so dass weiterhin die Energieausbeute maximiert werden kann, gleichzeitig jedoch die Beanspruchung durch die Regelung begrenzt wird. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bsz:14-qucosa2-854767 ER - TY - THES A1 - Souza Jr., Luis Antonio de T1 - Computer-assisted diagnosis of Barrett's esophagus using machine learning techniques T1 - Auxílio ao diagnóstico automático do esôfago de Barrett utilizando aprendizado de máquina N2 - Esophageal adenocarcinoma is an illness that is usually hard to detect at the early stages in the presence of Barrett’s esohagus. The development of automatic evaluation systems of such illness may be very useful, thus assisting the experts in the neoplastic region detection. With the strong growth of machine learning techniques aiming to improve the effectivess of medical diagnosis, the use of such approaches characterizes a strong scenario to be explored for the early diagnosis of esophageal adenocarcinoma. Barrett’s esophagus as a predecessor of adenocarcinoma can be explained by some risk factors, such as obesity, smoking, and late medical diagnosis. This project proposes the development of new computer vision and machine learning techniques to assist the automatic diagnosis of the esophageal adenocarcinioma based on the evaluation of two kind of features: (i) handcrafted features, calculated by means of human knowledge using some image processing technique and; (ii) deeply-learnable features, calculated exclusively based on deep learning techniques. From the extensive application of global and local protocols for the models proposed in this work, the description of cancer-affected images and Barrett’s esophagus-affected samples were generalized and deeply evaluated using, for example, classifiers such as Support Vector Machines, ResNet-50 and the combination of descriptions by handcrafted and deeply-learnable features. Also, the behavior of the automatic definition of key-points within the evaluated techniques was observed, something of a paramount importance nowadays to guarantee transparency and reliability in the decisions made by computational techniques. Thus, this project contributes to both the computational and medical fields, introducing new classifiers, approaches and interpretation of the class generalization process, in addition to proposing fast and precise manners to define cancer, delivering important and novel results concerning the accurate identification of cancer in samples affected by Barrett’s esophagus, showing values around 95% of correct identification rates and arranged in a collection of scientific works developed by the author during the research period and submitted/published to date. KW - Machine Learning KW - Barrett's esophagus KW - Deep Learning KW - handcrafted features KW - deeply-learnable features KW - convolutional neural networks KW - interpretability Y1 - 2022 PB - Universidade Federal de São Carlos ER - TY - JOUR A1 - Dörrenbächer, Judith A1 - Chow, Rosan A1 - Yoo, Daisy A1 - Eriksson, Eva T1 - An Archive of Tensions : a Growing Collection of Challenges in More-Than-Human Design JF - Interactions N2 - Imagine a long table covered with scattered materials – balls of wool, small wooden tiles, and pieces of clay. Around it, fifteen designers and researchers gather, quietly moving notes and connecting ideas with yarn. Each thread ties one tension to another: care to control, innovation to sustainability, agency to relation. The table becomes a web of contradictions – messy and unresolved. This was not a design sprint or a problem-solving session. It was a collective reflection: a one-day workshop at the DIS 2025 conference named Paradoxes, Tensions and Challenges in Decentering the Human organized by the authors of this article together with Marc Hassenzahl and Anton Poikolainen Rosén. Here, we explored the paradoxes and tensions that are inherent to More-than-Human Design (MtHD). Eleven participants and the organizers shared their work. When tensions surfaced in conversations, they were noted, discussed, clustered, and physically connected. Rather than trying to overcome these contradictions, we asked to name them – to hold them in our hands, literally, and to see what new connections might emerge. What began as a physical act of clustering became the seed for what we now call the Archive of Tensions: a growing collection of challenges in designing beyond the human. KW - Design, Human-Centered, Posthuman, Anthropocentrism KW - Interaction Design KW - More-Than-Human Y1 - 2026 U6 - https://doi.org/10.1145/3795510 VL - 33 IS - 2 SP - 62 EP - 65 PB - ACM ER - TY - CHAP A1 - Ramsauer, Ralf A1 - Lohmann, Daniel A1 - Mauerer, Wolfgang T1 - Reliable Pre-Integration Tracking of Commits on Mailing Lists T2 - Invited Talk at Safety Summit at Embedded Linux Conference Europe (ELCE18) Y1 - 2018 CY - Edinburgh, Scotland ER - TY - BOOK ED - Reglin, Thomas ED - Schöpf, Nicolas ED - Loebe, Herbert T1 - Prozessorientierung in der Ausbildung : Ausbildung im Arbeitsprozess T3 - Wirtschaft und Bildung N2 - Der vorliegende Band versammelt Beiträge von Berufsbildungsexperten zu Organisation, Didaktik und betrieblicher Praxis prozessorientierter Ausbildung. KW - Arbeitsprozess KW - Betriebliche Ausbildung KW - Deutschland KW - Handlungsorientiertes Lernen Y1 - 2005 SN - 978-3-7639-3280-1 VL - 39 PB - Bertelsmann CY - Bielefeld ER - TY - CHAP A1 - Sterner, Michael ED - Faulstich, Martin ED - Mocker, Mario T1 - WBGU Gutachten - zukunftsfähige Bioenergie und nachhaltige Landnutzung T2 - Biomasse & Abfall : Emissionen mindern und Rückstände nutzen (Verfahren & Werkstoffe für die Energietechnik ; 5) Y1 - 2009 SN - 9783981039146 SP - 23 EP - 28 PB - Dorner Printconcept CY - Sulzbach-Rosenberg ER - TY - CHAP A1 - Schroll-Decker, Irmgard A1 - Prokop, Ernst A1 - Thomma-Schleipfer, Evi T1 - 1978-1988: Die Professionalisierung in der KEB und das veränderte Verhältnis von Haupt- und Ehrenamt T2 - 50 Jahre KEB : 1958-2008 : Chronik 2004-2008 Y1 - 2009 SP - 79 EP - 83 PB - KEB Bayern CY - München ER - TY - CHAP A1 - Schreiner, Rupert A1 - Mulot, M. A1 - Gauggel, H. P. A1 - Schweizer, H. A1 - Laue, C. K. A1 - Wallenstein, R. T1 - Dynamic and spectral properties of red DFB lasers T2 - Technical Digest. Summaries of papers presented at the Conference on Lasers and Electro-Optics. Postconference Technical Digest (IEEE Cat. No.01CH37170) ; Baltimore, May 6 - 11, 2001 (Trends in optics and photonics series ; 56) N2 - Summary form only given. Narrow linewidth GaInP/AlGaInP DFB lasers are promising light sources for spectroscopy, for optical data storage systems and for plastic optical fiber WDM applications. However, little is known about the dynamic behavior of red DFB lasers. In this paper, we report on the dynamic and spectral properties of those devices. The lasers were first characterized under cw operation at 25/spl deg/C. Threshold currents are /spl sim/14 mA (475 /spl mu/m length) and /spl sim/18 mA (900 /spl mu/m length). The lasers show stable single mode emission at 680 nm with a SMSR better than -25 dB. The spectral linewidth of the 900 /spl mu/m long devices was measured by using a scanning-Fabry-Perot interferometer. Y1 - 2001 UR - http://ieeexplore.ieee.org/document/947498/ SN - 1-55752-662-1 U6 - https://doi.org/10.1109/CLEO.2001.947498 SP - 81 EP - 82 PB - IEEE ER - TY - THES A1 - Zürner, Christian T1 - Ästhetische Bildung und Frühromanik : Kritische Dialoge zwischen Wilhelm Wackenroder und Theodor W. Adorno T2 - Villigst Perspektiven Y1 - 2006 SN - 978-3-8258-9171-8 VL - 8 PB - LIT CY - Berlin ER - TY - CHAP A1 - Zürner, Christian ED - Keil, Werner ED - Goer, Charis T1 - Vom Göttlichen in der Musik. Wilhelm Heinrich Wackenroders Berglinger-Text “Die Wunder der Tonkunst” T2 - "Seelenaccente"-"Ohrenphysiognomik" : Zur Musikanschauung E.T.A. Hoffmanns, Heinses und Wackenroders. - (Diskordanzen - Studien zur neueren Musikgeschichte ; 8) Y1 - 2000 SN - 978-3-487-11262-6 SP - 297 EP - 337 PB - Olms, Georg CY - Hildesheim ER - TY - CHAP A1 - Zürner, Christian ED - Bedford-Strohm, Heinrich ED - Höhne, Florian ED - Reitmeier, Tobias T1 - What needs saying and how? Reflections on content and methodology in the profile of Public Theology T2 - Contextuality and Intercontextuality in Public Theology. - Proceedings from the Bamberg Conference 23.-25.06.2011. - Bamberg 23.06.2011-25.06.2011. - (Theologie in der Öffentlichkeit : 4) Y1 - 2013 SN - 978-3-643-90189-7 SP - 335 EP - 338 PB - Lit Verlag CY - Berlin ER - TY - CHAP A1 - Zürner, Christian ED - Fritsch-Oppermann, Sybille T1 - Vom Erzählen : Gedanken zur Abschlußdiskussion T2 - Sofies Welt : ein interreligiöser Dialog über Geschichte, Philosophie und Wirklichkeit ; Dokumentation einer Tagung der Evangelischen Akademie Loccum vom 8. bis 10. Mai 1998 - (Loccumer Protokolle ; 19/98) Y1 - 1998 SP - 150 EP - 152 PB - Evangelische Akademie Loccum ER - TY - GEN A1 - Zürner, Christian T1 - Lebenskunst als Lernziel Kultureller Bildung? T2 - Kulturelle Bildung Online KW - Kulturelle Bildung KW - Kritische Theorie KW - Lebenskunst KW - Leben KW - Lernen Y1 - 2015 U6 - https://doi.org/10.25529/92552.104 ER - TY - JOUR A1 - Zürner, Christian T1 - Hermeneutische Perspektiven öffentlicher Theologie. Überlegungen zur Erweiterung ihres pragmatischen Profils JF - Evangelische Theologie N2 - »Publictheology«isatheologicaldiscoursethathasbeenformingforsometime.Itaddressesrecent social-ethicalquestionswhich are relevantfor society at large, intendingto prove theprincipalreasonabilityand commonapprovabilityof theologicalcontributionsto these de-bates. However, contraryto its originalintentionand instead of makingits specificrelevancefor the secular public plausible,public theologycould just as well demonstratethat religiouscontributionscan be replaced.This essay therefor Y1 - 2015 U6 - https://doi.org/10.14315/evth-2015-0204 VL - 75 IS - 2 SP - 107 EP - 119 PB - De Gruyter Prill ER - TY - CHAP A1 - Zürner, Christian ED - Dickel, Hans ED - Bubmann, Peter T1 - Popmusik als Medium von Erinnerungskultur T2 - Ästhetische Bildung in der Erinnerungskultur. - (Ästhetik und Bildung ; 8) Y1 - 2014 SN - 978-3-8376-2816-6 SP - 133 EP - 147 PB - transcript CY - Bielefeld ER - TY - CHAP A1 - Schöpf, Nicolas A1 - Beutner, S. ED - Reglin, Thomas ED - Schöpf, Nicolas ED - Loebe, Herbert T1 - Lern- und Arbeitsaufgaben – Handlungsorientierung – Prozessorientierung. Fallbeispiele aus der betrieblichen Praxis T2 - Prozessorientierung in der Ausbildung. Ausbildung im Arbeitsprozess. - (Wirtschaft und Bildung ; 39) KW - *pubEx Y1 - 2005 SN - 978-3-7639-3280-1 PB - Bertelsmann CY - Bielefeld ER - TY - CHAP A1 - Schöpf, Nicolas ED - Reglin, Thomas ED - Schöpf, Nicolas T1 - Lernen im und mit dem Internet – Die WebQuest-Didaktik T2 - eLearning für die betriebliche Praxis . - (Wirtschaft und Bildung ; 30) Y1 - 2005 SN - 978-3-7639-3112-5 SP - 181 EP - 195 PB - Bertelsmann CY - Bielefeld ER - TY - CHAP A1 - Schöpf, Nicolas ED - Engel, Nicolas ED - Sausele-Bayer, Ines T1 - Lernen in Mikroorganisationen : Berufspädagogische Anmerkungen zu einem offenen Forschungsfeld T2 - Organisation : ein pädagogischer Grundbegriff (Erlanger Beiträge zur Pädagogik; 15) Y1 - 2014 UR - https://content.e-bookshelf.de/media/reading/L-2916742-3d390c5ca0.pdf SN - 978-3-8309-3060-0 SP - 185 EP - 200 PB - Waxmann CY - Münster; New York ER - TY - CHAP A1 - Rösl, Gerhard ED - Görgens, Egon ED - Ruckriegel, Karlheinz ED - Seitz, Franz T1 - Finanzielle Repression T2 - Europäische Geldpolitik : Theorie Empirie und Praxis. (UTB ; 8285). - (wisu-texte) Y1 - 2013 SN - 978-3-8252-8555-5 SP - 390 EP - 392 PB - UVK Lucius CY - Konstanz ET - 6 ER - TY - CHAP A1 - Braun, Carina N. A1 - Pundt, Leena ED - Goinger Kreis e.V., T1 - HR Standards für Diversity Management T2 - Zukunft Personal Beschäftigung : Zwischen Praxis und Innovation Unternehmen und Gesellschaft (Zukunft Personal & Beschäftigung) Y1 - 2015 SN - 978-3-658-09196-5 U6 - https://doi.org/10.1007/978-3-658-09196-5_7 SP - 111 EP - 116 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Braun, Carina N. A1 - Klopprogge, Axel ED - Goinger Kreis e.V., T1 - Fachkräfte aus dem Ausland – Notwendigkeit und Hindernisse T2 - Zukunft Personal Beschäftigung : Zwischen Praxis und Innovation Unternehmen und Gesellschaft (Zukunft Personal & Beschäftigung) Y1 - 2015 SN - 978-3-658-09196-5 U6 - https://doi.org/10.1007/978-3-658-09196-5_10 SP - 143 EP - 162 PB - Springer Gabler CY - Wiesbaden ER - TY - THES A1 - Auer, Simon T1 - Musculoskeletal models in highly dynamic motion: effects of model parameters and mental stress N2 - The analysis and understanding of highly dynamic movements is a fundamental part of biomechanics. Since sports injuries often involve the lower extremities and muscles, musculoskeletal models can help to prevent them. These models allow the calculation of ground and joint reaction forces as well as muscle forces and activities for individual muscle strands. One goal of this work is to use musculoskeletal models to investigate the influence of mental stress on lower extremity loading. Moreover, the models themselves are evaluated for highly dynamic movements and practical recommendations for action will be derived. For this purpose, fast movements of youth competitive and amateur athletes will be recorded using different measurement systems. Subsequently, the models calculate the target parameters using inverse dynamics. Furthermore, measured and calculated muscle activities of the lower extremities are compared and artificial balancing forces (residuals) in the models are analyzed and minimization approaches are presented. The investigation of muscle and joint loading under mental stress has shown that the response to mental stress is highly individual. Athletes may experience a significant increase in muscle and knee forces with a simultaneous decrease in performance. The comparison of measured and calculated muscle activity proved the reliability of the models also for highly dynamic movements. With the frequently used default settings in the model and optical and inertial motion capture, the muscle activities in the model could be calculated reliably. The residual forces were highest, when the model transitioned from foot-ground contact to no contact and vice versa. By adjusting the settings of the kinematic filter and the ground reaction force prediction, the residuals were reduced by up to 54%. The analysis of musculoskeletal loading under mental stress has shown that the models can make a valuable contribution to the biomechanical analysis of highly dynamic movements. Subsequently, the models have also proven to be a reliable tool for the analysis of highly dynamic movements when the calculated parameters as well as the model-specific optimization options are reviewed. With this in mind, these models can contribute to further understand highly dynamic movements and prevent muscle injuries in athletes. N2 - Die Analyse und das Verständnis hochdynamischer Bewegungen ist ein fundamentaler Bestandteil der Biomechanik. Da Sportverletzungen häufig die unteren Extremitäten und Muskeln betreffen, können muskuloskelettale Modelle dazu beitragen, sie zu vermeiden. Diese Modelle ermöglichen die Berechnung von Boden- und Gelenkreaktionskräften sowie von Muskelkräften und -aktivitäten für einzelne Muskelstränge. Ein Ziel dieser Arbeit ist es, mit Hilfe von muskuloskelettalen Modellen den Einfluss von mentalen Belastungen auf die Belastung der unteren Extremitäten zu untersuchen. Darüber hinaus werden die Modelle selbst für hochdynamische Bewegungen evaluiert und praktische Handlungsempfehlungen abgeleitet. Zu diesem Zweck werden schnelle Bewegungen von jugendlichen Leistungs- und Freizeitsportlern mit verschiedenen Messsystemen aufgezeichnet. Anschließend berechnen die Modelle mittels inverser Dynamik die Zielparameter. Weiterhin werden gemessene und berechnete Muskelaktivitäten der unteren Extremitäten verglichen sowie künstliche Ausgleichskräfte (Residuen) in den Modellen analysiert und Minimierungsansätze vorgestellt. Die Untersuchung der Muskel- und Gelenkbelastung unter mentalem Stress hat gezeigt, dass die Reaktion auf mentalen Stress sehr individuell ist. Bei einzelnen Personen kann es zu einem deutlichen Anstieg der Muskel- und Kniegelenkreaktionskräfte bei gleichzeitiger Leistungsminderung kommen. Der Vergleich von gemessener und berechneter Muskelaktivität beweist die Zuverlässigkeit der Modelle auch bei hochdynamischen Bewegungen. Mit den häufig verwendeten Standardeinstellungen im Modell und der vielseitigen Bewegungserfassung konnten die Muskelaktivitäten im Modell zuverlässig berechnet werden. Die Residualkräfte waren am höchsten, wenn das Modell von Fuß-Boden-Kontakt zu keinem Kontakt und umgekehrt überging. Durch Anpassung der Einstellungen des kinematischen Filters und der Berechnung der Bodenreaktionskraft konnten die Residualkräfte um bis zu 54% reduziert werden. Die Analyse der muskuloskelettalen Belastung unter psychischer Beanspruchung hat gezeigt, dass die Modelle einen wertvollen Beitrag zur biomechanischen Analyse von hochdynamischen Bewegungen leisten können. In der Folge haben sich die Modelle auch bei der Überprüfung der berechneten Parameter sowie der modellspezifischen Optimierungsmöglichkeiten als zuverlässiges Werkzeug für die Analyse hochdynamischer Bewegungen erwiesen. Daher können die Modelle dazu beitragen, hochdynamische Bewegungen besser zu verstehen und Muskelverletzungen bei Sportlern vorzubeugen. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:355-epub-551061 CY - Regensburg ER - TY - THES A1 - Burger, Moritz T1 - Entwicklung eines innovativen Implantats zur minimalinvasiven Behandlung von isolierten Orbitabodenfrakturen Y1 - 2024 CY - Regensburg ER - TY - THES A1 - Steininger, Peter T1 - Experimentelle und numerische Untersuchungen an einem solarselektiven Wärmedämmsystem N2 - Zur Erreichung der von der Bundesregierung gesteckten Ziele, bis zum Jahr 2050 den Primärenergiebedarf im Gebäudesektor und die Treibhausgasemissionen beträchtlich zu reduzieren, kommt der nachhaltigen und zukunftsorientierten energetischen Sanierung von Fassaden an Bestandsgebäuden besondere Bedeutung zu. Für die Applikation an Außenwänden steht eine Vielzahl an herkömmlichen und neuartigen Dämmsystemen zur Verfügung, die entweder eine signifikante Erhöhung des thermischen Widerstands der Gebäudehülle oder die Nutzung der Sonne als zusätzliche Energiequelle ermöglichen. Um die vorteilhaften Eigenschaften der Erzielung winterlicher solarer Gewinne, des sommerlichen Überhitzungsschutzes und der hohen Dämmwirkung an sonnenlosen Tagen in einem Dämmsystem zu vereinen, unter Berücksichtigung ökologischer Aspekte, sind Entwicklungen im Bereich von innovativen Fassadensystemen notwendig. Das Ziel dieser Arbeit war die konstruktive Entwicklung sowie die experimentelle und numerische Untersuchung eines rein mineralischen solarselektiven Wärmedämmsystems, das die oben genannten Zielsetzungen erfüllt. Zur Bewertung der Leistungsfähigkeit des entwickelten Systems wurden an einem Prototyp, in einem eigens konzipierten Differenzklimakammerprüfstand, stationäre und dynamische Untersuchungen zum winkelabhängigen Solarstrahlungs- und Wärmetransport durchgeführt und bauphysikalische Kenngrößen, die einen Vergleich mit gängigen Dämmsystemen erlauben, abgeleitet. Der experimentell ermittelte winkelabhängige Gesamtenergiedurchlassgrad, der als stationäre Kenngröße zur Bewertung der Solarstrahlungsleitung herangezogen wird, zeigt ein Maximum im Auslegungspunkt für Wintermonate (19° Einstrahlwinkel) und kann für hohe Sonnenstände, zur Vermeidung von sommerlichen Überhitzungseffekten, signifikant reduziert werden. Darüber hinaus wurden die experimentellen Ergebnisse zur Validierung von stationären und dynamischen multiphysikalischen Simulationsmodellen des solarselektiven Wärmedämmsystems eingesetzt, welche ein tieferes Verständnis des Wärme- und Strahlungstransports ermöglichen. Unter Verwendung der validierten Simulationsmodelle wurden, ausgehend vom Prototyp, die wesentlichen konstruktiven Einflussfaktoren auf die Solarleitung und die Dämmwirkung des Systems ermittelt und das Verbesserungspotential entsprechend quantifiziert. Zudem wurden in einer jährlichen simulativen Untersuchung, unter Verwendung realer Wetterdaten, mithilfe zweier verbesserter Varianten des solarselektiven Wärmedämmsystems, die Heizenergieeinsparpotentiale in der Winter- und Übergangszeit gegenüber einer herkömmlich gedämmten Wandkonstruktion nachgewiesen. N2 - In order to reach the objectives of the Federal Government to considerably reduce the primary energy demand in the building sector and greenhouse gas emissions by the year 2050, the sustainable and future-oriented energetic retrofitting of existing buildings’ facades is of particular importance. A variety of conventional and novel thermal insulation systems are available for the application on exterior walls, which allow either a significant increase of the thermal resistance of the building envelope or the use of the sun as an additional energy source. In order to combine the beneficial properties of obtaining winter solar gains, summer overheating protection and high thermal insulation on sunless days in one insulating system, while taking into account ecological aspects, developments in the field of innovative facade systems are necessary. The objective of this work was the development as well as the experimental and numerical investigation of a purely mineral solar selective thermal insulation system that meets the aforementioned objectives. In order to assess the performance of the developed system, steady state and dynamic investigations of the angle-dependent solar irradiation and heat transport were carried out using a prototype in a differential climatic chamber test bench, so that characteristic building physics parameters, which allow a comparison with conventional thermal insulation systems, can be derived. The experimentally determined angle-dependent total solar energy transmittance, which is used as a steady state parameter for the assessment of the solar radiation transmission through the system, shows a maximum at the design point in winter months (19° incidence angle) and can be significantly reduced for high sun angles, thus avoiding overheating effects in summer. Furthermore, the experimental results were used for the validation of steady state and dynamic multiphysical simulation models of the solar selective thermal insulation system, which allow a deeper understanding of the heat and radiation transport. Using the validated simulation models, based on the prototype, the main constructive factors influencing the solar transmission and the thermal insulation performance of the system were determined and the potential for improvements was quantified accordingly. In addition, in a yearly simulation study using real weathering data, two improved variants of the solar selective thermal insulation system were used to show the heating energy savings in the winter and transition period compared to a conventionally insulated wall construction. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:91-diss-20220614-1615021-1-1 UR - https://mediatum.ub.tum.de/?id=1615021 ER - TY - BOOK A1 - Schultz, David A1 - Jain, Brijnesh T1 - Nonsmooth Analysis and Subgradient Methods for Averaging in Dynamic Time Warping Spaces N2 - Time series averaging in dynamic time warping (DTW) spaces has been successfully applied to improve pattern recognition systems. This article proposes and analyzes subgradient methods for the problem of finding a sample mean in DTW spaces. The class of subgradient methods generalizes existing sample mean algorithms such as DTW Barycenter Averaging (DBA). We show that DBA is a majorize-minimize algorithm that converges to necessary conditions of optimality after finitely many iterations. Empirical results show that for increasing sample sizes the proposed stochastic subgradient (SSG) algorithm is more stable and finds better solutions in shorter time than the DBA algorithm on average. Therefore, SSG is useful in online settings and for non-small sample sizes. The theoretical and empirical results open new paths for devising sample mean algorithms: nonsmooth optimization methods and modified variants of pairwise averaging methods. Y1 - 2017 U6 - https://doi.org/10.48550/arXiv.1701.06393 ER - TY - GEN A1 - Böhm, Tanja A1 - Lang, Laurenz A1 - Leusink, Florian A1 - Oberschmid, Diana T1 - KBE-Brückenwiderlager als nachhaltigere Alternativbauweise für Eisenbahnüberführungen T2 - 15. Tiefbaufachtagung VDEI, 12.02.2026, Radebeul N2 - Die zunehmende Beanspruchung des Schienennetzes und die Altersstruktur der Brücken im Netz der Deutschen Bahn erfordern künftig zahlreiche Ersatzneubauten. Bisherige Stahlbeton-Rahmenbauwerke, die oft mittels Querverschub eingebaut werden, verursachen jedoch hohe logistische Aufwendungen, lange Bauzeiten und erhebliche CO₂-Emissionen. In dieser Untersuchung wurden zwei Konzepte gegenübergestellt: ein konventionelles Rahmenbauwerk und eine Ausführung mit Widerlagern aus kunststoffbewehrter Erde (KBE) mit einem Stahltrog als Überbau-Fertigteil. Die Bemessung der KBE-Variante erfolgte nach aktueller Normung sowie den bahnspezifischen Richtlinien der DB im Grenzzustand der Tragfähigkeit und Gebrauchstauglichkeit. Die Ergebnisse belegen, dass das KBE-Widerlager alle relevanten Anforderungen der DB-Regelwerke erfüllt. Infolge ihrer duktilen Eigenschaften weisen KBE-Widerlager zudem geringere Relativsetzungen zum anschließenden Bahndamm auf als starre Betonbauwerke, wodurch Probleme am Übergang zwischen Erd- und Kunstbauwerk vermieden werden. Insgesamt stellen KBE-Brückenwiderlager eine technisch gleichwertige und in Teilen überlegene Alternative dar. Sie verbinden gute Gebrauchstauglichkeit und kurze Bauzeiten mit hoher Wirtschaftlichkeit. Die Reduktion von Stahlbetonmengen bietet zudem ein signifikantes Potenzial zur Senkung des CO₂-Ausstoßes, weshalb eine Etablierung der KBE-Bauweise als Standardbauweise im Netz der DB erstrebenswert ist.Die zunehmende Beanspruchung des Schienennetzes und die Altersstruktur der Brücken im Netz der Deutschen Bahn erfordern künftig zahlreiche Ersatzneubauten. Bisherige Stahlbeton-Rahmenbauwerke, die oft mittels Querverschub eingebaut werden, verursachen jedoch hohe logistische Aufwendungen, lange Bauzeiten und erhebliche CO₂-Emissionen. In dieser Untersuchung wurden zwei Konzepte gegenübergestellt: ein konventionelles Rahmenbauwerk und eine Ausführung mit Widerlagern aus kunststoffbewehrter Erde (KBE) mit einem Stahltrog als Überbau-Fertigteil. Die Bemessung der KBE-Variante erfolgte nach aktueller Normung sowie den bahnspezifischen Richtlinien der DB im Grenzzustand der Tragfähigkeit und Gebrauchstauglichkeit. Die Ergebnisse belegen, dass das KBE-Widerlager alle relevanten Anforderungen der DB-Regelwerke erfüllt. Infolge ihrer duktilen Eigenschaften weisen KBE-Widerlager zudem geringere Relativsetzungen zum anschließenden Bahndamm auf als starre Betonbauwerke, wodurch Probleme am Übergang zwischen Erd- und Kunstbauwerk vermieden werden. Insgesamt stellen KBE-Brückenwiderlager eine technisch gleichwertige und in Teilen überlegene Alternative dar. Sie verbinden gute Gebrauchstauglichkeit und kurze Bauzeiten mit hoher Wirtschaftlichkeit. Die Reduktion von Stahlbetonmengen bietet zudem ein signifikantes Potenzial zur Senkung des CO₂-Ausstoßes, weshalb eine Etablierung der KBE-Bauweise als Standardbauweise im Netz der DB erstrebenswert ist. Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-89072 CY - Radebeul ER - TY - CHAP A1 - Neidhart, Thomas T1 - Auswirkungen der zweiten Generation des Eurocode 7 auf die Bemessung von Stabilisierungssäulen T2 - 21. Erdbaufachtagung "Aktueller Stand der Technik im Erd- und Spezialtiefbau", 05.-06.02.2026, Leipzig N2 - In den aktuellen Regelwerken – insbesondere dem eingeführten EC 7 – werden Stabilisierungssäulen (StS) nicht direkt behandelt. Im kommenden Eurocode 7, Teil 3 (EC 7-3 neu), der als finaler Entwurf vorliegt, wurde nun ein Abschnitt 12 eingeführt, der Baugrundverbesserungen und StS umfasst. Aktuell wird an der deutschen Fassung des Eurocode 7, Teil 3 gearbeitet, die mit nicht widersprechenden, zusätzlichen nationalen Informationen, Angaben und Anhänge (NCI, NDP, NA) ergänzt wird, welche die Anwendung des Eurocode 7 -3 konkretisieren, ohne den europäischen Normentext in zu ändern oder zu widersprechen. Aufgrund des Inhaltes des neuen Eurocodes 7, Teil 3 wird die anstehende Einführung von deutliche Auswirkungen auf die bisherige Bemessung, Nachweisführung und Qualitätssicherung von StS haben, welche in der Praxis zu berücksichtigen sind. Kommentare und Anmerkungen des Arbeitskreises 2.8 Stabilisierungssäulen der DGGT konnten in den letzten Jahren an die jeweiligen Gremien weitergeleitet werden. Im Folgenden werden wichtige Änderungen und Neuerungen in den Normungen aufgezeigt und deren Auswirkungen erläutert. Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-89032 VL - 2026 ER - TY - JOUR A1 - Waas, Thomas A1 - Brockmann, R. A1 - Weise, Wolfram T1 - Deeply bound pionic states and the effective pion mass in nuclear systems JF - Physics Letters B N2 - We show that the s-wave pion-nuclear potential which reproduces the deeply bound pionic states in Pb, recently discovered at GSI, is remarkably close to the one constructed directly from low energy theorems based on chiral symmetry. Converting this information into an effective pion mass we find m:/m,, N 1.13 in the center of the Pb nucleus, and mi/m,, N 1.07 in symmetric nuclear matter. Y1 - 1997 U6 - https://doi.org/10.1016/S0370-2693(97)00643-6 N1 - Die Preprint-Version ist ebenfalls in diesem Repositorium verzeichnet unter: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/7914 VL - 405 IS - 3;4 SP - 215 EP - 218 PB - Elsevier ER - TY - JOUR A1 - Dobler, Barbara A1 - Walter, Cornelia A1 - Knopf, Antje A1 - Fabri, Daniella A1 - Löschel, Rainer A1 - Polednik, Martin A1 - Schneider, Frank A1 - Wenz, Frederik A1 - Lohr, Frank T1 - Optimization of extracranial stereotactic radiation therapy of small lung lesions using accurate dose calculation algorithms JF - Radiation Oncology N2 - BACKGROUND The aim of this study was to compare and to validate different dose calculation algorithms for the use in radiation therapy of small lung lesions and to optimize the treatment planning using accurate dose calculation algorithms. METHODS A 9-field conformal treatment plan was generated on an inhomogeneous phantom with lung mimics and a soft tissue equivalent insert, mimicking a lung tumor. The dose distribution was calculated with the Pencil Beam and Collapsed Cone algorithms implemented in Masterplan (Nucletron) and the Monte Carlo system XVMC and validated using Gafchromic EBT films. Differences in dose distribution were evaluated. The plans were then optimized by adding segments to the outer shell of the target in order to increase the dose near the interface to the lung. RESULTS The Pencil Beam algorithm overestimated the dose by up to 15% compared to the measurements. Collapsed Cone and Monte Carlo predicted the dose more accurately with a maximum difference of -8% and -3% respectively compared to the film. Plan optimization by adding small segments to the peripheral parts of the target, creating a 2-step fluence modulation, allowed to increase target coverage and homogeneity as compared to the uncorrected 9 field plan. CONCLUSION The use of forward 2-step fluence modulation in radiotherapy of small lung lesions allows the improvement of tumor coverage and dose homogeneity as compared to non-modulated treatment plans and may thus help to increase the local tumor control probability. While the Collapsed Cone algorithm is closer to measurements than the Pencil Beam algorithm, both algorithms are limited at tissue/lung interfaces, leaving Monte-Carlo the most accurate algorithm for dose prediction. Y1 - 2006 U6 - https://doi.org/10.1186/1748-717X-1-45 VL - 1 PB - BMC ; Springer ER - TY - JOUR A1 - Zygmanski, Piotr A1 - Högele, Wolfgang A1 - Cormack, Robert A1 - Chin, Lee A1 - Löschel, Rainer T1 - A volumetric-modulated arc therapy using sub-conformal dynamic arc with a monotonic dynamic multileaf collimator modulation JF - Physics in medicine and biology N2 - We present a new dose delivery scheme utilizing sub-conformal dynamic arc (sub-CD-ARC) with a dynamic multileaf collimator (dMLC) modulation in a single rotation. In sub-conformal delivery, a MLC aperture conforms not to the whole target but to its portion, simultaneously completely avoiding organs at risk (OARs). In CD-ARC therapy, the dose deposition level depends on the target width and distance to the axis of rotation, and therefore the use of multiple arcs is necessary to achieve a uniform dose within the target in 3D. In our delivery scheme, the dose deposition variations symptomatic of non-modulating sub-CD-ARC are compensated for in 3D by a quasi-periodic monotonic dMLC modulation. For this reason, we call this scheme sub-conformal dynamic modulated arc (sub-CD-MARC) therapy. The advantage of using such a modulation is that MLC leaf motion has just a few control points, and that an inverse planning problem is reduced to a linear equation problem with a few unknown parameters, which have clear physical meaning. We show the general dosimetric properties of sub-CD-ARC and sub-CD-MARC for a specific geometry of the target and OARs (rotational symmetry with varying inner and outer radii along the axis of rotation). In addition, we present numerical results of sub-CD-MARC inverse planning optimization. Y1 - 2008 U6 - https://doi.org/10.1088/0031-9155/53/22/009 VL - 53 IS - 22 SP - 6395 EP - 6417 PB - IOP Publishing ER - TY - JOUR A1 - Hoegele, W. A1 - Löschel, Rainer A1 - Zygmanski, Piotr T1 - An alternative VMAT with prior knowledge about the type of leaf motion utilizing projection method for concave targets JF - Medical physics N2 - The authors present an alternative approach to inverse planning optimization and apply it to volumetric modulated are therapy (VMAT) in one rotation with a prior knowledge about the type of leaf motions. The optimization is based on the projection theorem in inner product spaces. MLC motion is directly considered in the optimization, thus avoiding leaf segmentation characteristic of IMRT optimization. In this work they realize the method for concave irregular targets encompassing an organ at risk leading to a repetitive MLC motion pattern. Applying the projection theorem leads to a noniterative optimization method and reduces to solving few systems of linear equations with small numbers of dimensions. The solution of the inverse problem is unique, and false minima are naturally excluded. They divided the full rotation into about 50 short arc segments and for each segment decomposed dose into separate contributions related to stages of MLC motion. This results generally in an inverse problem with just four free parameters per arc segment. Practically three degrees of freedom will be used for the purpose of a constant angular speed of the gantry. Therefore the total number of degrees of freedom for a 3D problem is about 3 x 50 x number of collimator leaf pairs for irradiating the whole target volume in one rotation. Two 2D and one 3D concave target volumes are applied for a slice by slice optimization. A 6 MV photon beam model is used, including realistic scattering and attenuation, and a maximal leaf velocity of 3 cm/s is regarded. The resulting dose distributions cover the PTVs very well and have maxima at about 108% of dose in the PTVs. The OAR is spared very strong in all cases. As a result of optimization, the MLC apertures are repetitively opening and closing and can be interpreted in an intuitive way. Applying the projection method for this knowledge-based VMAT delivery scheme for concave target volumes is an alternative technique for dose optimization. There are several properties, such as uniqueness of MLC motions and their continuous dependence on geometry and prescribed dose, that make this approach interesting to inverse planning. This method is still in an investigational stage, but promising results are presented. In future work it will be extended directly (without conceptual changes) in several directions to be more clinically applicable. Y1 - 2009 U6 - https://doi.org/10.1118/1.3173815 VL - 36 IS - 8 SP - 3764 EP - 3774 PB - American Association of Physicists in Medicine ER - TY - JOUR A1 - Dobler, Barbara A1 - Streck, Natalia A1 - Klein, Elisabeth A1 - Löschel, Rainer A1 - Haertl, Petra Maria A1 - Kölbl, Oliver T1 - Hybrid plan verification for intensity-modulated radiation therapy (IMRT) using the 2D ionization chamber array I'mRT MatriXX--a feasibility study JF - Physics in medicine and biology N2 - The 2D ionization chamber array I'mRT MatriXX (IBA, Schwarzenbruck, Germany) has been developed for absolute 2D dosimetry and verification of intensity-modulated radiation therapy (IMRT) for perpendicular beam incidence. The aim of this study is to evaluate the applicability of I'mRT MatriXX for oblique beam incidence and hybrid plan verification of IMRT with original gantry angles. For the assessment of angular dependence, open fields with gantry angles in steps of 10 degrees were calculated on a CT scan of I'mRT MatriXX. For hybrid plan verification, 17 clinical IMRT plans and one rotational plan were used. Calculations were performed with pencil beam (PB), collapsed cone (CC) and Monte Carlo (MC) methods, which had been previously validated. Measurements were conducted on an Elekta SynergyS linear accelerator. To assess the potential and limitations of the system, gamma evaluation was performed with different dose tolerances and distances to agreement. Hybrid plan verification passed the gamma test with 4% dose tolerance and 3 mm distance to agreement in all cases, in 82-88% of the cases for tolerances of 3%/3 mm, and in 59-76% of the cases if 3%/2 mm were used. Separate evaluation of the low dose and high dose regions showed that I'mRT MatriXX can be used for hybrid plan verification of IMRT plans within 3% dose tolerance and 3 mm distance to agreement with a relaxed dose tolerance of 4% in the low dose region outside the multileaf collimator (MLC). Y1 - 2010 U6 - https://doi.org/10.1088/0031-9155/55/2/N02 VL - 55 IS - 2 SP - N39 EP - N55 PB - IOP Publishing ER - TY - JOUR A1 - Hoegele, W. A1 - Löschel, Rainer A1 - Merkle, N. A1 - Zygmanski, Piotr T1 - An efficient inverse radiotherapy planning method for VMAT using quadratic programming optimization JF - Medical physics N2 - PURPOSE The purpose of this study is to investigate the feasibility of an inverse planning optimization approach for the Volumetric Modulated Arc Therapy (VMAT) based on quadratic programming and the projection method. The performance of this method is evaluated against a reference commercial planning system (eclipse(TM) for rapidarc(TM)) for clinically relevant cases. METHODS The inverse problem is posed in terms of a linear combination of basis functions representing arclet dose contributions and their respective linear coefficients as degrees of freedom. MLC motion is decomposed into basic motion patterns in an intuitive manner leading to a system of equations with a relatively small number of equations and unknowns. These equations are solved using quadratic programming under certain limiting physical conditions for the solution, such as the avoidance of negative dose during optimization and Monitor Unit reduction. The modeling by the projection method assures a unique treatment plan with beneficial properties, such as the explicit relation between organ weightings and the final dose distribution. Clinical cases studied include prostate and spine treatments. The optimized plans are evaluated by comparing isodose lines, DVH profiles for target and normal organs, and Monitor Units to those obtained by the clinical treatment planning system eclipse(TM). RESULTS The resulting dose distributions for a prostate (with rectum and bladder as organs at risk), and for a spine case (with kidneys, liver, lung and heart as organs at risk) are presented. Overall, the results indicate that similar plan qualities for quadratic programming (QP) and rapidarc(TM) could be achieved at significantly more efficient computational and planning effort using QP. Additionally, results for the quasimodo phantom [Bohsung et al., "IMRT treatment planning: A comparative inter-system and inter-centre planning exercise of the estro quasimodo group," Radiother. Oncol. 76(3), 354-361 (2005)] are presented as an example for an extreme concave case. CONCLUSION Quadratic programming is an alternative approach for inverse planning which generates clinically satisfying plans in comparison to the clinical system and constitutes an efficient optimization process characterized by uniqueness and reproducibility of the solution. Y1 - 2012 U6 - https://doi.org/10.1118/1.3671922 VL - 39 IS - 1 SP - 444 EP - 454 PB - American Association of Physicists in Medicine ER - TY - JOUR A1 - Schöpf, Nicolas A1 - Iseler, K. A1 - Sausele, I. T1 - Persistenz und Verschwinden. Pädagogische Organisationen im historischen Kontext JF - Zeitschrift für Soziologie der Erziehung und Sozialisation Y1 - 2007 SN - 1436-1957 VL - 27 IS - 4 SP - 442 EP - 447 PB - Beltz Juventa ER - TY - JOUR A1 - Zürner, Christian T1 - Religiöse Bildung in der säkularisierten Gesellschaft. Grundsatzüberlegungen mit Bezug auf den Philosophen Jürgen Habermas JF - Freies Christentum : auf der Suche nach neuen Wegen Y1 - 2007 SN - 0931-3834 VL - 59 IS - 3 SP - 67 EP - 69 ER - TY - JOUR A1 - Thieme, Dorothea A1 - Landenberger, M. T1 - Therapie der akuten tiefen Beinvenenthrombose - eine Literaturrecherche: Verbandtechniken im Vergleich JF - Pflegezeitschrift Y1 - 2009 VL - 62 IS - 4 SP - 206 EP - 209 ER - TY - JOUR A1 - Thieme, Dorothea A1 - Langer, G. A1 - Behrens, Johann T1 - Das Wissen Pflegender zur Kompressionstherapie - Studie zur Therapie der akuten tiefen Beinvenenthrombose JF - Pflegezeitschrift Y1 - 2009 VL - 62 IS - 5 SP - 296 EP - 301 ER - TY - JOUR A1 - Thieme, Dorothea A1 - Langer, G. A1 - Behrens, Johann T1 - Befragung Pflegender zur Kompressionstherapie bei akuter tiefer Beinvenenthrombose JF - Pflegezeitschrift Y1 - 2010 VL - 63 IS - 3 SP - 162 EP - 167 ER - TY - JOUR A1 - Zürner, Christian T1 - ... geheimnisvolle Dinge, die ich in Worten nicht aufsetzen kann : Ästhetik in der religiösen Bildung JF - Evangelische Aspekte Y1 - 2006 VL - 16 IS - 1 SP - 27 EP - 30 ER - TY - JOUR A1 - Zürner, Christian T1 - Auf der Suche nach Identität… JF - Arnoldshainer Akzente : Nachrichten aus der Evangelischen Akademie Y1 - 2009 SN - 0934-7119 IS - 1 ER - TY - JOUR A1 - Schöpf, Nicolas T1 - Mit Kompetenzpässen die Talente ihrer Mitarbeiter kennen und entwickeln JF - Personal im Fokus Y1 - 2013 IS - 8 SP - 30 EP - 32 ER - TY - JOUR A1 - Schöpf, Nicolas T1 - Grenzkontrollen. Erleichtert die Öffnung von Bildungswegen kontinuierliches Lernen? JF - Berufs- und Wirtschaftspädagogik Online N2 - "Individuelle Bildungsverläufe sind nur zu einem Teil das Ergebnis aktiver persönlicher Planung und Steuerung. Oftmals sind sie das Resultat von Selektion, systemischen Schranken und Abschottungen zwischen Teilen des Bildungssystems. Die Grenzen, die es auf individuellen Bildungspfaden zu überschreiten gilt, sind vielfältig: Sie existieren zwischen Jahrgangsklassen, zwischen Grund- und weiterführenden Schulen bis hin zur Hochschule oder zwischen Übergangssystem, beruflicher und akademischer Bildung. Gegenwärtig verbindet sich insbesondere mit Ansätzen der Europäisierung der Aus- und Weiterbildung die Hoffnung, Bildungswege zu öffnen und damit die Möglichkeiten lebenslanges Lernen zu erweitern: Die Rede ist dabei von einer Verbesserung der transnationalen Mobilität der Lernenden und der Durchlässigkeit nationaler Bildungssysteme. Es geht dabei also um die Anerkennung von Lernergebnissen, die im Ausland erzielt wurden, und ihre Anrechnung auf deutsche Bildungsgänge und um die Anerkennung und Anrechnung von Lernergebnissen zwischen Subsystemen der Bildung in Deutschland. Die Debatte um Durchlässigkeit macht dabei auf mehrere Aspekte aufmerksam: Die Frage, unter welchen Gesichtspunkten Anerkennung diskutiert wird, verweist unter anderem auf das klassische Verhältnis von Qualifizierung und Bildung, von Speziellem und Allgemeinem der Bildung. Damit verknüpft stellt sich zudem die Frage, inwieweit auch das Thema Durchlässigkeit eine Rolle für Entwicklungen spielt, die gegenwärtig als Neuvermessung des Bildungssystems diskutiert werden." (Autorenreferat; BIBB-Doku). KW - Anerkennung KW - Anrechnung KW - Auslandsaufenthalt KW - Berufsbildungssystem KW - Bildungsabschluss KW - Bildungssystem KW - Durchlässigkeit KW - Mobilität Y1 - 2010 UR - http://www.bwpat.de/ausgabe18/schoepf_bwpat18.pdf SN - 0945-3164 IS - 18 PB - bwp ER - TY - JOUR A1 - Schöpf, Nicolas T1 - Der Qualifikationsrahmen als Weg in mehr Wettbewerb? Potenziale und Herausforderungen europäischer Bildungspolitik für die Erwachsenenbildung JF - DIE-Zeitschrift für Erwachsenenbildung N2 - Der vorliegende Beitrag sondiert Potenziale und Gefährdungen, die für die Erwachsenenbildung aus dem Prozess der Europäisierung von Bildungspolitik resultieren. Die zugehörigen strukturellen Wirkmechanismen im Spannungsfeld von Kooperation und Konkurrenz belegt der Text am Beispiel des Europäischen Qualifikationsrahmens (EQR). Mit dem Zweck einer besseren Vergleichbarkeit von Bildungssystemen und Bildungsgängen geht vom EQR unweigerlich der Impuls zu mehr Wettbewerb einher, international wie national. Der Autor ordnet diese Dynamik in die übergreifenden bildungspolitischen Prozesse ein, die mit Bolgna, Lissabon und Kopenhagen assoziiert werden. KW - Auswirkung KW - Bildungspolitik KW - Europa KW - Europäischer Qualifikationsrahmen KW - Kompetenz KW - Leistungsmessung KW - Qualifikation KW - Weiterbildung Y1 - 2010 U6 - https://doi.org/10.3278/DIE1002W045 SN - 0945-3164 IS - 2 SP - 45 EP - 48 PB - Bertelsmann CY - Bielefeld ER - TY - JOUR A1 - Schöpf, Nicolas T1 - Stiefkind Weiterbildung? Anmerkungen zur Diskussion um die Europäisierung der Berufsbildung JF - Wirtschaft und Berufserziehung : W & B ; Zeitschrift für Berufsbildung und Bildungspolitik N2 - ECVET wird gegenwärtig hauptsächlich im Zusammenhang mit der Verbesserung und Flexibilisierung des Ausbildungssystems diskutiert, während die berufliche Weiterbildung noch eine untergeordnete Rolle spielt. Der Beitrag beleuchtet Anknüpfungspunkte und Handlungsfelder für die berufliche Weiterbildung. Als Handlungsfelder rücken Transparenz und Vergleichbarkeit der Weiterbildungsergebnisse und Transparenz und Vergleichbarkeit ausländischer Qualifikationen in den Blick. ECVET könnte heterogene Prozesse der Weiterbildung angesichts standardisiert beschriebener Lernergebnisse vergleichbar und erzielte Kompetenzen über regionale und trägerbezogene Grenzen hinweg verwertbar machen. (BIBB-Doku). KW - Berufsausbildung KW - Berufsbildung KW - Europäische Union KW - Kreditpunktesystem KW - Lernergebnis KW - Lernergebnisorientierung KW - Weiterbildung Y1 - 2009 SN - 0341-339X VL - 61 IS - 10 SP - 28 EP - 30 PB - Ziel CY - Augsburg ER - TY - JOUR A1 - Schöpf, Nicolas T1 - Lernergebnisse – Schlüssel für die Verständigung in Europa? Perspektiven für die Erwachsenen- und Weiterbildung JF - Bildung für Europa : Journal der Nationalen Agentur beim Bundesinstitut für Berufsbildung Y1 - 2011 SN - 1616-5837 IS - 15 SP - 33 EP - 34 PB - Nationale Agentur beim Bundesinstitut für Berufsbildung ER - TY - JOUR A1 - Schöpf, Nicolas T1 - Die Qual der Wahl. Fragen der Weiterbildungsorganisation und des Einsatzes von eLearning in Unternehmen JF - IT-Mittelstand Y1 - 2005 IS - 12 SP - 54 EP - 58 PB - MEDIENHAUS Verlag GmbH ER - TY - JOUR A1 - Schöpf, Nicolas T1 - Anstöße aus Europa JF - Personal Y1 - 2009 IS - 4 SP - 18 EP - 20 ER - TY - CHAP A1 - Griesberger, Philipp A1 - Leist, Susanne A1 - Zellner, Gregor T1 - Analysis of techniques for business process improvement T2 - 19th European Conference on Information Systems, ECIS 2011, Helsinki, Finland, June 9-11, 2011 N2 - This paper is about identifying and analyzing techniques that can be used in a business process improvement (BPI) situation. To determine suitable techniques, the term BPI is defined and criteria are derived to analyze the usability of the selected techniques. Over 300 techniques from various improvement methods were reduced to those techniques which can be applied to help improve business processes and, in particular, to support the act of improvement. Identifying these techniques is helpful, because in most cases the act of improvement is a black box that lacks guidelines or structured procedures. In our research we developed an evaluation scheme to analyze the usability of BPI techniques and give hints about how to select a suitable technique for a certain improvement situation. Y1 - 2011 UR - https://www.researchgate.net/publication/221408836_Analysis_of_techniques_for_business_process_improvement ER - TY - JOUR A1 - Heinrich, Bernd A1 - Zellner, Gregor A1 - Leist, Susanne T1 - Service integrators in business networks - The importance of relationship values JF - Electronic Markets N2 - To realise the potentials of CRM (customer relationship management), relationship-specific processes need to be designed and implemented in companies. This is all the more important and complicated in business networks where two or more actors collaborate to serve the customers. A good collaboration within business networks is the basis for understanding the customer process and identifying customer needs. But, even in these days of customer orientation, transaction orientation is still a matter of strong interest, and the following questions remain to be answered: What is the difference between relationship-oriented processes and transaction-oriented processes, and how can relationship-oriented processes be designed for a business network? The authors give first answers to both questions by using a systematic, goal-oriented specialisation of generic actions. To give an example, one relationship-oriented process will be designed and specified for a certain customer process in the course of this paper. Y1 - 2011 U6 - https://doi.org/10.1007/s12525-011-0075-x VL - 21 IS - 4 SP - 215 EP - 235 PB - Springer ER - TY - JOUR A1 - Hoegele, W. A1 - Löschel, Rainer A1 - Dobler, Barbara A1 - Hesser, J. A1 - Kölbl, Oliver A1 - Zygmanski, Piotr T1 - Stochastic formulation of patient positioning using linac-mounted cone beam imaging with prior knowledge JF - Medical physics N2 - PURPOSE In this work, a novel stochastic framework for patient positioning based on linac-mounted CB projections is introduced. Based on this formulation, the most probable shifts and rotations of the patient are estimated, incorporating interfractional deformations of patient anatomy and other uncertainties associated with patient setup. METHODS The target position is assumed to be defined by and is stochastically determined from positions of various features such as anatomical landmarks or markers in CB projections, i.e., radiographs acquired with a CB-CT system. The patient positioning problem of finding the target location from CB projections is posed as an inverse problem with prior knowledge and is solved using a Bayesian maximum a posteriori (MAP) approach. The prior knowledge is three-fold and includes the accuracy of an initial patient setup (such as in-room laser and skin marks), the plasticity of the body (relative shifts between target and features), and the feature detection error in CB projections (which may vary depending on specific detection algorithm and feature type). For this purpose, MAP estimators are derived and a procedure of using them in clinical practice is outlined. Furthermore, a rule of thumb is theoretically derived, relating basic parameters of the prior knowledge (initial setup accuracy, plasticity of the body, and number of features) and the parameters of CB data acquisition (number of projections and accuracy of feature detection) to the expected estimation accuracy. RESULTS MAP estimation can be applied to arbitrary features and detection algorithms. However, to experimentally demonstrate its applicability and to perform the validation of the algorithm, a water-equivalent, deformable phantom with features represented by six 1 mm chrome balls were utilized. These features were detected in the cone beam projections (XVI, Elekta Synergy) by a local threshold method for demonstration purposes only. The accuracy of estimation (strongly varying for different plasticity parameters of the body) agreed with the rule of thumb formula. Moreover, based on this rule of thumb formula, about 20 projections for 6 detectable features seem to be sufficient for a target estimation accuracy of 0.2 cm, even for relatively large feature detection errors with standard deviation of 0.5 cm and spatial displacements of the features with standard deviation of 0.5 cm. CONCLUSIONS The authors have introduced a general MAP-based patient setup algorithm accounting for different sources of uncertainties, which are utilized as the prior knowledge in a transparent way. This new framework can be further utilized for different clinical sites, as well as theoretical developments in the field of patient positioning for radiotherapy. Y1 - 2011 U6 - https://doi.org/10.1118/1.3532959 VL - 38 IS - 2 SP - 668 EP - 681 PB - American Association of Physicists in Medicine ER - TY - JOUR A1 - Heckner, Markus A1 - Schneidermeier, Tim A1 - Hastreiter, Isabella A1 - Wolff, Christian T1 - Der Newbie, der Fortgeschrittene und der Power-User. Warum es nicht reicht, “einfach mal die Nutzer zu fragen” JF - i-com N2 - Innerbetriebliche Software entwickelt sich häufig über Jahre hinweg inkrementell weiter, sammelt so Schritt für Schritt Funktionen an und verliert an Übersichtlichkeit. Soll diese Software hinsichtlich ihrer Gebrauchstauglichkeit optimiert werden, müssen aus Sicht eines externen Usability-Beraters zunächst die Domäne des Kunden verstanden und die Arbeitsprozesse analysiert werden. In der Analyse muss insbesondere der Umgang unterschiedlicher Nutzergruppen mit der Software berücksichtigt werden, um fundierte Neuvorschläge in einem Redesign erarbeiten zu können. In diesem Erfahrungsbericht beschreiben wir anhand eines konkreten Praxisbeispiels Eigenschaften von Nut-zergruppen und deren Einfluss auf die Analyse, und warum es nicht reicht, die Nutzer „einfach mal zu fragen, wie sie die Software denn finden". Y1 - 2012 U6 - https://doi.org/10.1524/icom.2012.0038 VL - 11 IS - 3 SP - 47 EP - 50 PB - DeGruyter ER - TY - THES A1 - Süß, Franz T1 - The influence of mental stress on the musculoskeletal human back during static posture and trunk motion N2 - The investigation of the influence of mental stress on muscle recruitment of the back and its effect on the intervertebral discs was the main focus of this work. Furthermore, the goal was to develop algorithms to use mental stress as an input parameter in musculoskeletal simulation models. In the first step, a study was designed to investigate the influence of emotional and cognitive stress without kinetic influencing factors during sitting. At the muscular level, emotional stress was found to affect the upper back, while cognitive stress elicited higher muscle activity in the upper and lower back. Using a newly developed algorithm to apply back muscle recruitment changes to static inverse kinematic simulation models, load increases at the discs of up to 189 N on average and up to 907 N at peak were found.Based on the results of the first study, a second dynamic study was designed and conducted. In this case, the focus was on the cognitive stressor and the lower back. Using a dynamometer, subject-specific loads were applied during extension and flexion of the upper back. In contrast to the first study, in the upper back, only the right m. trapezius pars descendens showed a load-induced difference in muscle activity, but the lower back did. To investigate the effects of muscle tone increase in detail, the algorithm developed in the first study was extended to the dynamic case. The use of simulation models allowed the inference of the effects of the purely stress-induced tone increase. For this purpose, the kinetic and muscular effects were isolated and simulated. The study revealed a stress increase of 47% of the body weight in the L4L5 disc. The final numerical study focused on the general application of muscle activities to inverse kinematic simulation models. This was based on the novel simulation algorithm used in study two and the measured muscle activities. The simulation of the measured muscle activities formed the link between reality and simulation. To simulate the activities, neural networks and gradient boosting regression algorithms were investigated. The latter were found to be better suited to represent the data. However, the data is too small for a detailed statement, especially for loads below 100%. The results of this work can help to better assess the musculoskeletal effects of psychological stress on the musculoskeletal system and, if necessary, to develop ergonomic prevention strategies. By recognizing stress-related kinematic difference, as well as subsequent prompting of trunk movement, could help prevent long-term effects. When examining any situation, the combination of machine learning and musculoskeletal simulation tools can help examine and minimize the effects of psychological stress. N2 - Die Untersuchung des Einflusses von mentalem Stress auf die Muskelrekrutierung des Rückens und dessen Auswirkung auf die Bandscheiben war der Schwerpunkt dieser Arbeit. Des Weiteren war es das Ziel, Algorithmen zu entwickeln, um die mentale Belastung als Eingabeparameter in muskuloskelettalen Simulationsmodellen zu nutzen. Im ersten Schritt wurde eine Studie konzipiert, um den Einfluss von emotionalem und kognitivem Stress ohne kinetische Einflussfaktoren beim Sitzen zu untersuchen. Auf muskulärer Ebene wurde festgestellt, dass emotionaler Stress den oberen Rücken beeinflusste, während kognitiver Stress höhere Muskelaktivität im oberen und unteren Rücken auslöste. Unter Verwendung eines neu entwickelten Algorithmus zur Anwendung von Rekrutierungsänderungen der Rückenmuskulatur auf statische inverse kinematische Simulationsmodelle wurden Belastungserhöhungen an den Bandscheiben von bis zu 189 N im Mittel und bis zu 907 N in der Spitze gefunden. Basierend auf den Ergebnissen der ersten Studie wurde eine zweite dynamische Studie konzipiert und durchgeführt. In diesem Fall lag der Fokus auf dem kognitiven Stressor und dem unteren Rücken. Mit Hilfe eines Dynamometers wurden subjektspezifische Belastungen während der Extension und Flexion des Oberkörpers aufgebracht. Im Gegensatz zur ersten Studie konnte im oberen Rücken, nur im rechten m. trapezius pars descendens ein Lastfall bedingter Unterschied in der Muskelaktivität festgestellt werden, wohl aber im unteren Rücken. Um die Auswirkungen der Muskeltonuserhöhung im Detail zu untersuchen, wurde der in der ersten Studie entwickelte Algorithmus auf den dynamischen Fall erweitert. Die Verwendung von Simulationsmodellen erlaubte den Rückschluss auf die Auswirkungen der rein stressinduzierten Tonuserhöhung. Hierfür wurden die kinetischen und muskulären Effekte isoliert und simuliert. Die Studie ergab eine Belastungserhöhung von 47 % des Körpergewichts in der L4L5 Bandscheibe. Die abschließende numerische Studie konzentrierte sich auf die allgemeine Anwendung von Muskelaktivitäten auf inverse kinematische Simulationsmodelle. Grundlage dafür waren der neuartige Simulationsalgorithmus, der in Studie zwei verwendet wurde, und die gemessenen Muskelaktivitäten. Die Simulation der gemessenen Muskelaktivitäten bildete das Bindeglied zwischen Realität und Simulation. Um die Aktivitäten zu simulieren, wurden neuronale Netze und Gradient-Boosting-Regressionsalgorithmen untersucht. Es zeigte sich, dass letztere besser geeignet sind, die Daten abzubilden. Für eine detaillierte Aussage, insbesondere für Belastungen unter 100 %, ist die Datenlage jedoch zu klein. Die Ergebnisse dieser Arbeit können helfen, die muskuloskelettalen Auswirkungen psychischer Belastungen auf den Bewegungsapparat besser einzuschätzen und ggf. ergonomische Präventionsstrategien zu entwickeln. Durch das Erkennen stressbedingter kinematischer Unterschied sowie die darauffolgende Aufforderung zur Rumpfbewegung könnte helfen, langfristige Auswirkungen zu vermeiden. Bei der Untersuchung beliebiger Situationen, kann die Kombination aus maschinellem Lernen und muskuloskelettalen Simulationswerkzeugen helfen, die Auswirkungen psychischer Belastungen zu untersuchen und zu minimieren. KW - Musculoskeletal simulation KW - mental stress KW - spinal disc loads Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:355-epub-460554 ER - TY - THES A1 - Thumann, Philipp T1 - Lebensdauerbewertung von stoßartig belasteten Werkzeugkomponenten T1 - Durability analyses of tool components subjected to impact loading N2 - Die vorliegende Arbeit beinhaltet ein neuartiges Gesamtkonzept zur Betriebsfestigkeitsbewertung von Werkzeugkomponenten unter Berücksichtigung dynamischer Einflüsse. Es werden experimentelle Untersuchungen an Proben aus dem Vergütungsstahl 42CrMoS4-QT sowie aus den Gusseisen mit Kugelgraphit EN-GJS-600-3 und mit Lamellengraphit EN-GJL-250 durchgeführt. Die Ergebnisse aus den Versuchen dienen zum einen zur allgemeinen Validierung von Betriebsfestigkeitsrechnungen. Zum anderen wird damit die Frequenzabhängigkeit in Bezug auf stoßartige Belastungen untersucht. Neben den validierten Berechnungsmodellen resultiert aus den Versuchungen die Erkenntnis einer ausgeprägten Frequenzabhängigkeit, welche in zukünftigen Auslegungsrechnungen berücksichtigt werden muss. Bei Untersuchungen an einem Umform- und Beschneidewerkzeug wird die erarbeitete methodische Vorgehensweise aus den Versuchen angewandt. Es wird eine FE-Simulation eines Gesamtmodells erstellt, welche mit Messungen am Werkzeug validiert wird. Die Untersuchungen am Umform- und Beschneidewerkzeug liefern demnach ein validiertes FE-Simulationsmodell, das neben dem Werkzeug das Pressenmodell und die im Fertigungsprozess zu bearbeitende Platine beinhaltet. Unter Anwendung der Submodelltechnik an einer Einzelkomponente werden geeignete FE-Ergebnisse für eine Betriebsfestigkeitsrechnung generiert. Die Betriebsfestigkeitsrechnung erfolgt nach dem validierten Berechnungsmodell aus den Versuchen. Im Zuge der Analysen am Werkzeug findet das validierte Berechnungsmodell für den Gusswerkstoff EN-GJS-600-3 Anwendung. Die Berechnungsergebnisse korrelieren mit tatsächlich aufgetretenen Schäden an einem Bauteil. N2 - The present work includes a new procedure for the operational fatigue strength assessment of tool components considering dynamic influences. Experimental investigations are carried out on specimen made from the quenched and tempered steel 42CrMoS4-QT as well as from the cast iron with spheroidal graphite EN-GJS-600-3 and with lamellar graphite EN-GJL-250. The results of the tests serve on the one hand for the general validation of operational fatigue strength calculations. On the other hand, the frequency dependency in relation to impact loads is examined. In addition to the validated calculation models, the material tests result in the recognition of a pronounced frequency dependency, which must be considered in future design calculations. In investigations on a forming and cutting tool, the methodical procedure developed from the material tests is used. An FE simulation of an overall model is created, which is validated with measurements on the tool. The investigations on the forming and cutting tool provide a validated FE simulation model, which contains the tool as well as the press model and the sheet metal part to be machined in the manufacturing process. Using the submodel technique on a single component, suitable FE results are generated for an operational fatigue strength calculation. The calculation is based on the validated calculation model from the material tests. In the course of the analyzes on the tool, the validated calculation model for the cast material EN-GJS-600-3 is used. The calculation results correlate with damage that has actually occurred to a component. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:91-diss-20210713-1554721-1-5 UR - https://mediatum.ub.tum.de/doc/1554721/1554721.pdf ER -