<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>1103</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>60</pageFirst>
    <pageLast>67</pageLast>
    <pageNumber/>
    <edition/>
    <issue>9</issue>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Effizientes Multicore-Scheduling in Eingebetteten Systemen – Teil 1: Algorithmen für zuverlässige Echtzeitsysteme</title>
    <abstract language="deu">Eingebettete Systeme unterliegen neben den funktionalen Anforderungen besonders nicht funktionalen Qualitätsanforderungen wie Effizienz, Zuverlässigkeit und Echtzeitfähigkeit. Mit steigendem Bedarf an Rechenkapazität können bisherige Konzepte zur Leistungssteigerung von Singlecore-Systemen jedoch nicht mehr eingesetzt werden – der Umstieg auf Multicore-Systeme wird erforderlich. Im ersten Teil dieser Arbeit werden eine mögliche Prozessorarchitektur für zukünftige Automotive Multicore-Systeme und die Abstraktion der Software für diese Systeme vorgestellt. Nach einer Klassifkation von Multicore-Scheduling-Algorithmen  präsentieren wir exemplarisch einen Algorithmus mit statischer Taskallokation und einen Algorithmus mit dynamischer Taskallokation. Bei beiden Algorithmen handelt es sich um eine Überführung theoretisch behandelter Algorithmen auf Automotive Systeme.</abstract>
    <parentTitle language="deu">atp - Automatisierungstechnische Praxis</parentTitle>
    <identifier type="url">https://docplayer.org/4474533-Effizienter-einsatz-von-multicore-systemen.html</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <author>Michael Deubzer</author>
    <author>Frank Schiller</author>
    <author>Jürgen Mottok</author>
    <author>Michael Niemetz</author>
    <author>Ulrich Margull</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1102</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>218</pageFirst>
    <pageLast>240</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">An Experience-Based Repository of Reusable Components for an Component-Based Automotive Software System</title>
    <parentTitle language="deu">Applied Software Measurement, proceedings of the joined International Conferences on Software Measurement IWSM/MetriKon/Mensura 2010, 10.-12. November 2010, Stuttgart, Germany</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Hobelsberger</author>
    <author>Reiner Dumke</author>
    <author>Jürgen Mottok</author>
    <author>Michael Niemetz</author>
    <author>Gerhard Wirrer</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1101</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Dependability von Systemen mit dynamischen Multicore-Schedulingalgorithmen</title>
    <parentTitle language="deu">safetronic</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Deubzer</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1100</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>24</pageFirst>
    <pageLast>27</pageLast>
    <pageNumber/>
    <edition/>
    <issue>11</issue>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Dependability-Betrachtung von Multicore-Scheduling</title>
    <abstract language="deu">Der Embedded Markt stellt sich auf eine neue Herausforderung ein: denUmstieg von Singlecore- auf Multicore-Prozessorsysteme. Dabei soll dieUmsetzung der Norm ISO 26262 die Funktionale Sicherheit der elektri-schen und elektronischen Systeme im Kraftfahrzeug gewährleisten. In diesem Beitrag betrachten die Hochschule Regensburg und die TÜV SüdAutomotive GmbH das Scheduling eines Echtzeitsystems als ein sicher-heitsrelevantes Sub-System.</abstract>
    <parentTitle language="deu">HANSER Automotive</parentTitle>
    <identifier type="url">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00207DD4_0669BA3F5B24/4b2124fb030a4d3d5a42a83aaec4bddadebe3077/AM_2010_11_Dependability-Betrachtung-von-Multicore-Scheduling.pdf</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Deubzer</author>
    <author>Jürgen Mottok</author>
    <author>Andreas Bärwald</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1099</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Software Engineering Lernen für die berufliche Praxis – Erfahrungen mit dem konstruktivistischen Methodenbaukasten</title>
    <parentTitle language="deu">Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Georg Hagel</author>
    <author>Jürgen Mottok</author>
    <author>Matthias Utesch</author>
    <author>Dieter Landes</author>
    <author>Reimer Studt</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1096</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Modeling and Simulation of Embedded Real-Time Multi-Core Systems</title>
    <parentTitle language="deu">Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen</parentTitle>
    <identifier type="url">https://www.unibw.de/technische-informatik/mitarbeiter/professoren/siegle/publikationen/ese2010_muco_modsim.pdf</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Deubzer</author>
    <author>Martin Hobelsberger</author>
    <author>Jürgen Mottok</author>
    <author>Frank Schiller</author>
    <author>Reiner Dumke</author>
    <author>Markus Siegle</author>
    <author>Ulrich Margull</author>
    <author>Michael Niemetz</author>
    <author>Gerhard Wirrer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Real-Time Systems</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Multicore</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Model-Driven Development</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Architecture Description Language</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Simulation</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othpublikationsherkunft" number="">Externe Publikationen</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1095</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>378</pageFirst>
    <pageLast>386</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Fail-Safe und Fault-Tolerant Mechanismen</title>
    <parentTitle language="deu">Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Braun</author>
    <author>Jürgen Mottok</author>
    <author>Christian Miedl</author>
    <author>D. Greyer</author>
    <author>Mark Minas</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1093</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>8</pageNumber>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Safeguarded Processing of Sensor Data</title>
    <abstract language="eng">The spectrum of software tasks no longer includes only rare function controlling tasks for sensor actuator chains in reactive embedded systems. However, more and more responsible challenges like safety-critical scenarios are tackled. Therefore sensor data have to be safeguarded by several mechanism. An obvious and widely used approach is the use of two redundant hardware controllers, but this comes along with an additional cost, space and energy factor. Another way to fulfill certain safety properties is to implement a second diverse software channel in a single micro-controller architecture according the Safely Embedded Software (SES) approach. However, a lack of performance occurs by implementing this diverse channel for complex computations e.g. floating-point operations. This paper gives an approach for transferring the SES into a coprocessor and to migrate SES to a flexible and powerful FPGA architecture.</abstract>
    <parentTitle language="eng">IT-SecurityArea (IT-SA 2009) vom 13.-15. Oktober 2009, Nürnberg</parentTitle>
    <identifier type="url">https://hal.archives-ouvertes.fr/hal-02268737</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Steindl</author>
    <author>Jürgen Mottok</author>
    <author>Hans Meier</author>
    <author>Frank Schiller</author>
    <author>M. Früchtl</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Safety embedded software</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>FPGA</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diverse instructions</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Safety code weaving</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16317">Sensorik</collection>
    <collection role="institutes" number="">Labor Industrielle Elektronik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1091</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>14</pageFirst>
    <pageLast>15</pageLast>
    <pageNumber/>
    <edition/>
    <issue>September</issue>
    <volume>53</volume>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">OSEK-RTOS für Jedermann (Teil 1)</title>
    <parentTitle language="deu">Embedded Software Engineering Report</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Peter Raab</author>
    <author>Jürgen Mottok</author>
    <author>Hans Meier</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Industrielle Elektronik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1090</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>10</pageFirst>
    <pageLast>12</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>53</volume>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">OSEK-RTOS für Jedermann (Teil 2)</title>
    <parentTitle language="deu">Embedded Software Engineering Report</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Peter Raab</author>
    <author>Jürgen Mottok</author>
    <author>Hans Meier</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Industrielle Elektronik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1089</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Migration of SES to FPGA Based Architectural Concepts</title>
    <parentTitle language="eng">Proceedings of the Workshop 'Safely embedded software'</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Steindl</author>
    <author>Jürgen Mottok</author>
    <author>Hans Meier</author>
    <author>Frank Schiller</author>
    <author>M. Früchtl</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Industrielle Elektronik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1087</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>10</pageFirst>
    <pageLast>11</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>53</volume>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Safely embedded software</title>
    <parentTitle language="eng">Embedded Software Engineering Report</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1086</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>32</pageFirst>
    <pageLast>35</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Mehr Qualität durch modellbasiertes Testen</title>
    <parentTitle language="deu">Elektronik automotive 3</parentTitle>
    <identifier type="url">https://www.elektroniknet.de/automotive/software-tools/mehr-qualitaet-durch-modellbasiertes-testen.1370.html</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Wolfgang Hartig</author>
    <author>Albert Habermann</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1085</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Model-based testing for better quality</title>
    <parentTitle language="eng">Vector, Technicle Article</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Wolfgang Hartig</author>
    <author>Albert Habermann</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1084</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>637</pageFirst>
    <pageLast>644</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Beschreibung eines kooperativen Tasksystems mit OSEK-konformen Scheduler durch Petri Netze</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Schorer</author>
    <author>Stefan Kuntz</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1083</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Qualification and certification of development tools for safety-critical applications</title>
    <abstract language="eng">This paper presents an overview on qualification and certification of tools used in the phases of the safety lifecycle for safety-critical applications, either for development or for verification and validation. Software development tools are widely used in the development of safety-critical software systems. More verification and validation procedures will be automated by software tools to reduce time consuming manual testing. The impact of software tools on functional safety is discussed. Based on normative regulations like IEC 61508 and ISO DIS 26262 different approaches for tool qualification and certification are presented.</abstract>
    <parentTitle language="eng">Proceedings of Dependability@SIEMENS Conference</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Andreas Bärwald</author>
    <author>Harald Hauff</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1082</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>655</pageFirst>
    <pageLast>661</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Diskussion des Einsatzes von Safely Embedded Software in FPGA-Architekturen</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Steindl</author>
    <author>Jürgen Mottok</author>
    <author>Hans Meier</author>
    <author>Frank Schiller</author>
    <author>M. Früchtl</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Industrielle Elektronik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1081</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>628</pageFirst>
    <pageLast>636</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Modifikation des Taskzustandsmodells des LLREF-Schedulers auf einem Dual-Core-Prozess</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Stefan Krämer</author>
    <author>Jürgen Mottok</author>
    <author>Hans Meier</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Industrielle Elektronik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1080</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>645</pageFirst>
    <pageLast>654</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Migration overhead in multiprocessor scheduling</title>
    <parentTitle language="eng">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>G. Stamatescu</author>
    <author>Michael Deubzer</author>
    <author>Jürgen Mottok</author>
    <author>Dan Popescu</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1079</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>583</pageFirst>
    <pageLast>593</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Anwendung der Bloom´schen Taxonomie auf Lehrinhalte des Software-Engineerings</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Reimer Studt</author>
    <author>Jürgen Mottok</author>
    <author>Matthias Utesch</author>
    <author>Dieter Landes</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1076</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>628</pageFirst>
    <pageLast>636</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Modifikation des Taskzustandsmodells des LLREF-Schedulers auf einem Dual-Core-Prozessor</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Stefan Krämer</author>
    <author>Jürgen Mottok</author>
    <author>Hans Meier</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Industrielle Elektronik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1075</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>134</pageFirst>
    <pageLast>148</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Software Qualität – eine Glaubensfrage? Ein Überblick über Modelle der Softwarezuverlässigkeit</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Hobelsberger</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1074</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>536</pageFirst>
    <pageLast>542</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Partitionierungs-Scheduling von Automotive Restricted Tasksystemen auf Multiprozessorplattformen</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Deubzer</author>
    <author>Ulrich Margull</author>
    <author>Jürgen Mottok</author>
    <author>Michael Niemetz</author>
    <author>Gerhard Wirrer</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1056</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferencepresentation</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A model based safety analysis approach for embedded system architectures</title>
    <parentTitle language="eng">Tag der Technik 2008</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Hobelsberger</author>
    <author>Jürgen Mottok</author>
    <author>Reiner Dumke</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1055</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferencepresentation</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A method of performance analysis for embedded system architectures</title>
    <parentTitle language="eng">8. Tag der Technik am 13. Juni 2008 an der Hochschule Regensburg</parentTitle>
    <subTitle language="deu">Poster-Session</subTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Deubzer</author>
    <author>Jürgen Mottok</author>
    <author>Christian Flug</author>
    <author>Thomas Zeitler</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1053</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>13</pageFirst>
    <pageLast>15</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Aktuelle Forschungsergebnisse aus dem "Laboratory for Safe and Secure Systems"(LaS3)</title>
    <parentTitle language="deu">Jahresrückblick 2008 des Bayerischen IT-Sicherheitsclusters</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1052</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>14</pageNumber>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Modellbasierte Sicherheitsanalysen von Software Architekturen</title>
    <parentTitle language="deu">Jahresrückblick 2008 des Bayerischen IT-Sicherheitsclusters</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Hobelsberger</author>
    <author>Jürgen Mottok</author>
    <author>Michael Deubzer</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1051</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>13</pageNumber>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Profiling in Embedded Real-Time Software Systemen</title>
    <parentTitle language="deu">Jahresrückblick 2008 des Bayerischen IT-Sicherheitsclusters</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Deubzer</author>
    <author>Jürgen Mottok</author>
    <author>Martin Hobelsberger</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1050</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>141</pageFirst>
    <pageLast>147</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Implementierungslösungen für die Eigenentwicklung eines deterministischen, nicht preemptiven Echtzeit Betriebssystems zur Verwaltung eingebetteter Applikationen</title>
    <parentTitle language="deu">Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>B. Schirdewahn</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1046</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>155</pageFirst>
    <pageLast>167</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Profiling Performance Analyse von Embedded Real-Time System Architekturen</title>
    <parentTitle language="eng">Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Deubzer</author>
    <author>Jürgen Mottok</author>
    <author>Christian Flug</author>
    <author>Thomas Zeitler</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1045</id>
    <completedYear/>
    <publishedYear>2007</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace>Regensburg</publisherPlace>
    <creatingCorporation>Hochschule für Angewandte Wissenschaften Regensburg</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Generische Safety-Architektur für Kfz-Software</title>
    <parentTitle language="deu">Spektrum, das Magazin der Hochschule Regensburg</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>M. Hummel</author>
    <author>Jürgen Mottok</author>
    <author>R. Egen</author>
    <author>Frank Schiller</author>
    <author>T. Mattes</author>
    <author>M. Blum</author>
    <author>F. Druckstein</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1044</id>
    <completedYear/>
    <publishedYear>2007</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>25</pageNumber>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Automotive safety and security</title>
    <parentTitle language="deu">Jahresrückblick 2007 des Bayerischen IT-Sicherheitsclusters</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>H. Federrath</author>
    <author>Jürgen Mottok</author>
    <author>K. Plößl</author>
    <author>Thomas Völkl</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16312">Energie und Mobilität</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1153</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">An Efficient Partitioning Strategy for Runnables in Weakly Dependent Tasks on Embedded Multi-Core Systems</title>
    <abstract language="eng">With multi-core controllers entering the area of automotive control ECUs, strategies for parallelizing the control- algorithms come into focus. This paper deals with a special part of automotive powertrain software, called state transitions. Since dependencies between runnables executed there are weak, the transitions provide a good basis for parallelization. We present a strategy of how to distribute efficiently the execution of runnables to different cores while taking care of inner and outer dependencies. The strategy is accompanied by two case studies demonstrating the performance of the concept. The first one is carried out to find the most efficient strategies of parallelize state transitions based on randomly generated, simulated state transitions. In the second one, the developed partitioning strategies are applied to a real software project for an automotive powertrain system.</abstract>
    <parentTitle language="eng">Embedded real-time software and systems (ERTS² 2014), Feb 2014, Toulouse, France</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Alfranseder</author>
    <author>Tobias Krapf</author>
    <author>Ralph Mader</author>
    <author>Michael Niemetz</author>
    <author>Jürgen Mottok</author>
    <author>Christian Siemers</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1154</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">An Efficient Spin-Lock Based Multi-Core Resource Sharing Protocol</title>
    <abstract language="eng">We present in this paper a new lock-based resource sharing protocol PWLP (Preemptable Waiting Locking Protocol) for embedded multi-core processors. It is based on the busy-wait model and works with non-preemptive critical sections while task may be preempted by tasks with a higher priority when waiting for resources. Our protocol can be applied in partitioned as well as global scheduling scenarios, in which task-fix, job-fix or dynamically assigned priorities may be used. Furthermore, the PWLP permits nested requests to shared resources. Finally, we present a case study based on event-based simulations in which the FMLP (Flexible Multiprocessor Locking Protocol) and the proposed PWLP are compared.</abstract>
    <parentTitle language="deu">33rd IEEE International Performance, Computing, and Communications Conference (IPCCC), Austin (TX), USA,  5-7 December 2014</parentTitle>
    <identifier type="doi">10.1109/PCCC.2014.7017090</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Alfranseder</author>
    <author>Michael Deubzer</author>
    <author>Benjamin Justus</author>
    <author>Jürgen Mottok</author>
    <author>Christian Siemers</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1155</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>40</pageFirst>
    <pageLast>46</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Shaker</publisherName>
    <publisherPlace>Aachen</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Designing efficient Node.js applications – Approaching useful patterns</title>
    <parentTitle language="eng">4th Applied Research Conference, 5th July 2014, Ingolstadt</parentTitle>
    <identifier type="isbn">978-3-8440-2875-1</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>P. Thiel</author>
    <author>Magnus Hackl</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1157</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>152</pageFirst>
    <pageLast>165</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Springer</publisherName>
    <publisherPlace>Munich</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Towards the Derivation of Guidelines for the Deployment of Real-Time Tasks on a Multicore Processor</title>
    <abstract language="eng">The deployment of automotive software on a multicore processor includes the task of mapping executables to cores. Given the number of possible solutions, integrators have to solve a complex problem. Considering multiple, often conflicting goals like minimizing task response times and memory consumption, complexity further increased with the advent of multicore processors. We present a model-based approach for deriving design rules supporting integrators with statically mapping tasks to a multicore ECU. First, an evolutionary algorithm is used to sample the design space. For each sample, a model-based analysis is performed, resulting in the required fitness values according to the system metric objectives. Finally, subsets of the sample population are used to derive deployment guidelines by evaluating similarities between highly ranked solutions. This reduces the number of solutions to be considered by the integrators by orders of magnitude. In a case-study, we demonstrate the developed approach on an artificial automotive engine management system.</abstract>
    <parentTitle language="eng">4th International Symposium on Model-Based Safety and Assessment (IMBSA 2014), Munich, Germany, October 27-29, 2014, Proceedings</parentTitle>
    <identifier type="isbn">978-3-319-12213-7</identifier>
    <identifier type="doi">10.1007/978-3-319-12214-4_12</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="OtherSeries">Lecture Notes in Computer Science ; 8822</enrichment>
    <author>Stefan Schmidhuber</author>
    <author>Michael Deubzer</author>
    <author>Ralph Mader</author>
    <author>Michael Niemetz</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Real-time systems</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>embedded multicore systems</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>runnable partitioning</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>task-to-core mapping</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>software integration</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>design space exploration</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>evolutionary algorithm</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1158</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>591</pageFirst>
    <pageLast>598</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Comparison of Enhanced Markov Models and Discrete Event Simulation – for evaluation of probabilistic Faults in safety-critical real-time task sets</title>
    <abstract language="eng">In this paper we present simulation and model based approaches for evaluating and validating the temporal and safety relevant properties of software intensive safety-critical real-time embedded systems. A high level reliability model of a safe task execution is described by a continuous-time Markov process, enhanced by the modeling of execution times. It is shown that the behavior - regarding real-time and safety metrics - of this theoretical model can be transferred into an abstract system timing model, which then can be analyzed by a discrete event simulation approach. The verification of the discrete event simulation by Markov models offers the possibility of a holistic approach for reliability analysis combined with schedulability analysis of complex safety-critical multicore real-time systems by the discrete event simulation.</abstract>
    <parentTitle language="eng">Proceedings of EUROMICRO DSD 2014 - 17th Euromicro Conference on Digital System Design</parentTitle>
    <identifier type="doi">10.1109/DSD.2014.42</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Stefan Krämer</author>
    <author>Peter Raab</author>
    <author>Jürgen Mottok</author>
    <author>Stanislav Racek</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Model</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Stochastic simulation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>reliability analysis</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>safe software processing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>real-time operating system</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>multicore scheduling</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>discrete event simulation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>fault injection</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1159</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferencepresentation</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Effects of Arbitrary Hardware Faults on Multicore Scheduling in Safety-critical Applications – Evaluation by enhanced Markov models and discrete event simulation</title>
    <parentTitle language="eng">2014 PESW - The 2nd Prague Embedded Systems Workshop, June 2014</parentTitle>
    <identifier type="url">https://pesw.fit.cvut.cz/2014/presentations/pesw2014_Kramer.pdf</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Stefan Krämer</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1161</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>233</pageFirst>
    <pageLast>238</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Optimization of Real-Time Multicore Systems Reached by a Genetic Algorithm Approach for Runnable Sequencing</title>
    <abstract language="eng">The deployment of complex real-time systems with everyday increasing demands and possibilities, is a challenging task for engineers when performance and efficiency have to be maximized while cost have to be minimized at the same time. For already designed systems it became necessary to perform different modifications in order to find optimal software architecture configuration by respecting all timing constraints which are essential when speaking of real-time systems. In this work, we present a model-based approach of optimizing the execution sequence of runnables within tasks in order to reduce the system's reaction times by improving the overall signal flow duration. Hereby, a genetic optimization algorithm is used to create and evaluate multiple solutions for the runnable sequencing problem. We conclude by demonstration the efficiency of the presented approach with experimental results.</abstract>
    <parentTitle language="eng">2014 International Conference on Applied Electronics, Pilsen, Czech Republic</parentTitle>
    <identifier type="doi">10.1109/AE.2014.7011709</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <author>Erna Oklapi</author>
    <author>Michael Deubzer</author>
    <author>Stefan Schmidhuber</author>
    <author>Erjola Lalo</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>runnable sequencing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>embedded real-time systems</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>genetic algorithms</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>multi-core</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>optimization</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1188</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Verification of an Evolutionary Optimization Algorithm for Runnable Sequencing Problem</title>
    <parentTitle language="deu">4th Applied Research Conference, 5th July 2014, Ingolstadt</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Erna Oklapi</author>
    <author>Michael Deubzer</author>
    <author>Stefan Schmidhuber</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1189</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>653</pageFirst>
    <pageLast>658</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Comparison of Frontal Lecture and Workshop Learning Arrangements in a Software Engineering Education Project</title>
    <abstract language="eng">The increase in complexity of software and its creation over the last decades requires an increase in the quality of the education of software engineering professionals. The number of Universities which answer this call by replacing or extending lectures with simulated software projects is constantly rising. However, the question how to best transfer new technological knowledge needed to be successful within this projects to the students remains open. Therefore this paper will present a comparison between the classical frontal lecture and a modern workshop learning arrangement used within these projects. By the use of workshops not only the knowledge transfer but also the acquisition of personal and social competences will be facilitated. Furthermore positive experiences with workshops at university level will support life-long learning.</abstract>
    <parentTitle language="eng">2014 IEEE Global Engineering Education Conference (EDUCON), Istanbul, Turkey</parentTitle>
    <identifier type="doi">10.1109/EDUCON.2014.6826162</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Alexander Soska</author>
    <author>Michael Schumm</author>
    <author>Saskia Joseph</author>
    <author>Michael Reschke</author>
    <author>Jürgen Mottok</author>
    <author>Michael Niemetz</author>
    <author>Irmgard Schroll-Decker</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1190</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>241</pageFirst>
    <pageLast>254</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Shaker</publisherName>
    <publisherPlace>Aachen</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A New Conceptual Contribution for Serious Games in Academic Software Engineering Education</title>
    <abstract language="deu">Nowadays, the popularity and field of application of serious games &#13;
grows steadily. This educational method offers attractive pportunities for teaching and training by combining playful elements with learning content. By using game mechanics, thinking and technique, theoretical subject matters are treated in a fun and engaging way. Thereby, serious games utilize our intrinsic motivation to discover the surroundings in a playful manner. Embedded in educational settings, the goal is to mediate academic and non-academic knowledge to the &#13;
students. Especially in the field of software engineering it is important to have skills which go beyond pure technical knowledge. Yet, the use of serious games is still a manageable amount. With this paper, we give a contribution to the theoretical  design and development of serious games based on playful learning method and its relation to research-based learning in universal context. In addi-&#13;
tion we analyze the existing serious games in software engineering and present our thoughts about planning our own.</abstract>
    <parentTitle language="eng">European Conference on Software Engineering Education 2014 (ECSEE), 27 and 28 November 2014 in Seeon Monastery</parentTitle>
    <identifier type="url">https://www.researchgate.net/publication/277266392_A_New_Conceptual_Contribution_for_Serious_Games_in_Academic_Software_Engineering_Education</identifier>
    <identifier type="isbn">978-3-8440-3067-9</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Alexander Soska</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1203</id>
    <completedYear/>
    <publishedYear>2012</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>613</pageFirst>
    <pageLast>622</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Simulationsbasierte Reliability-Analyse – Einflüsse von zufälligen Fehlern auf das Echtzeit-Scheduling</title>
    <parentTitle language="deu">Tagungsband 5th Embedded Software Engineering Kongress, 3. bis 7. Dezember 2012, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Stefan Krämer</author>
    <author>Peter Raab</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1204</id>
    <completedYear/>
    <publishedYear>2012</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Lernarrangements im software engineering und deren evaluation – neue konzepte für hochschule und lebenslanges Lernen</title>
    <parentTitle language="deu">Tagungsband 5th Embedded Software Engineering Kongress, 3. bis 7. Dezember 2012, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Michael Schumm</author>
    <author>Saskia Joseph</author>
    <author>Jürgen Mottok</author>
    <author>Michael Niemetz</author>
    <author>Irmgard Schroll-Decker</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16314">Lebenswissenschaften und Ethik</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1205</id>
    <completedYear/>
    <publishedYear>2012</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>163</pageFirst>
    <pageLast>178</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Increasing the reliability of single and multicore systems with software rejuvenation and coded processing</title>
    <abstract language="eng">The safety of electric vehicles has the highest priority because it helps contribute to customer confidence and thereby ensures further growth of the electromobility market. Therefore in series production redundant hardware concepts like dual core microcontrollers running in lock-step-mode are used to reach ASIL D safety requirements given from the ISO 26262. Coded processing is capable of reducing redundancy in hardware by adding diverse redundancy in software, e.g. by specific coding of data and instructions. A system with two coded processing channels is considered. One channel is active and one is in cold standby. When the active channel fails, the service is switched from the active channel to the standby channel. It is imaginable that the two channels with implemented coded processing are running with time redundancy on a single core or on a multi core system where for example different ASIL levels are partitioned on different cores. In this paper a redundant concept based on coded processing and software rejuvenation will be taken into account.</abstract>
    <parentTitle language="eng">Automotive Safety &amp; Security 2012, Sicherheit und Zuverlässigkeit für automobile Informationstechnik, 14.-15. Nov. 2012, Karlsruhe</parentTitle>
    <identifier type="url">https://dl.gi.de/handle/20.500.12116/17555</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Braun</author>
    <author>Jürgen Mottok</author>
    <author>Christian Miedl</author>
    <author>Dirk Geyer</author>
    <author>Mark Minas</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1206</id>
    <completedYear/>
    <publishedYear>2012</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Kommunikationsmechanismen für sicherheitskritische multi-core Echtzeit-Systeme</title>
    <parentTitle language="deu">5th Automotive Summerschool, Regensburg, September 2012</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Alfranseder</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1207</id>
    <completedYear/>
    <publishedYear>2012</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Powertrain and electric system design of a 800-volt all-electric car</title>
    <parentTitle language="eng">European Conference on Nanoelectronics and Embedded Systems for Electric Mobility, eMotion in Smart Cities, 24.-28. September, 2012, Bologna, Italy</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Christian Miedl</author>
    <author>Jürgen Braun</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16312">Energie und Mobilität</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1208</id>
    <completedYear/>
    <publishedYear>2012</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>41</pageFirst>
    <pageLast>45</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Capability of single hardware channel for automotive safety applications according to ISO 26262</title>
    <parentTitle language="eng">2012 International Conference on Applied Electronics (AE 2012), Pilsen, Czech Republic, 5 - 7 September 2012</parentTitle>
    <identifier type="isbn">978-80-261-0038-6</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Braun</author>
    <author>Jürgen Mottok</author>
    <author>Christian Miedl</author>
    <author>Dirk Geyer</author>
    <author>Mark Minas</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1209</id>
    <completedYear/>
    <publishedYear>2012</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>151</pageFirst>
    <pageLast>156</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Reliability analysis of real-time scheduling by means of stochastic simulation</title>
    <abstract language="eng">We present a simulation-based approach to reliability analysis combined with a schedulability analysis of software intensive embedded real-time systems. In such a system not only does the software execution have to be hardened against soft errors, e.g., by means of coded processing or diverse execution, but also the real-time requirements have still to be met in the presence of such error to guarantee a safe operation of the system. For that reason, the influence regarding the real-time characteristics of a given sporadic error with a certain error rate is analyzed by means of a Monte Carlo simulation. Different safety design patterns are introduced and compared. Furthermore, the impact on the schedulability of an embedded system is discussed.</abstract>
    <parentTitle language="eng">2012 International Conference on Applied Electronics (AE 2012), Pilsen, Czech Republic, 5 - 7 September 2012</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Stefan Krämer</author>
    <author>Peter Raab</author>
    <author>Jürgen Mottok</author>
    <author>Stanislav Racek</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1191</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>253</pageFirst>
    <pageLast>268</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>bookpart</type>
    <publisherName>Springer</publisherName>
    <publisherPlace>Dodrecht</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">How to improve the reactiveness and efficiency of embedded multicore systems by use of probabilistic simulation and optimization techniques</title>
    <abstract language="eng">Safe and reliable multi-core technology becomes more and more important in the field of embedded systems. Today’s and future embedded systems require increasing performance while being more energy efficient. Moreover, the functional safety for these embedded systems has to be improved or developed completely new. In this chapter, we first address the challenges of embedded multi-core real-time systems. To raise the resilience of such systems we use the deadlock-free synchronization model of Block et al. (A flexible real-time locking protocol for multiprocessors. 2012 IEEE international conference on embedded and real-time computing systems and applications, vol 0, pp 47–56, 2007). The metric mean Normalized Blocking Time (mNBT) is hereby used to measure the timing effects of the blocking behavior of strongly interacting tasks. In a second step, we present a model-based approach to map the tasks of an embedded real-time system to the cores of a multi-core processor. Moreover, we derive an execution time model from runtime measurements of software functions. This information is then used to perform precise probabilistic simulations of different task-to-core mappings and evaluate them with regard to task response times, inter-task blocking overhead and load distribution. Subsequently, we integrate the probabilistic simulation within an optimization technique to systematically improve the task-to-core mapping. We conclude with a case-study, where we demonstrate the effectiveness of the presented approach by optimizing the task-to-core mapping of a practical automotive powertrain system.</abstract>
    <parentTitle language="eng">Improving Disaster Resilience and Mitigation - New Means and Tools. NATO Science for Peace and Security Series C: Environmental Security</parentTitle>
    <identifier type="doi">10.1007/978-94-017-9136-6_16</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Mottok</author>
    <author>Martin Alfranseder</author>
    <author>Stefan Schmidhuber</author>
    <author>Matthias Mucha</author>
    <author>Andreas Sailer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Embed System</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Functional Safety</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Arrival Curve</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Task Allocation Problem</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Deadline Violation</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1192</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>577</pageFirst>
    <pageLast>585</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Mut zu Fehlern, um die Qualität zu steigern – Fault-Injection zur Steigerung der Zuverlässigkeit</title>
    <parentTitle language="deu">Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezember 2013, Sindelfingen</parentTitle>
    <identifier type="isbn">978-3-8343-2408-5</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Stefan Krämer</author>
    <author>Erol Simsek</author>
    <author>Jürgen Braun</author>
    <author>Michael Deubzer</author>
    <author>Armin Stingl</author>
    <author>Martin Hobelsberger</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1194</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>538</pageFirst>
    <pageLast>544</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Amalthea – Plattform für kontinuierliche, modellbasierte Entwicklung</title>
    <parentTitle language="deu">Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezember 2013, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Andreas Sailer</author>
    <author>Stefan Schmidhuber</author>
    <author>Michael Deubzer</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1195</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>243</pageFirst>
    <pageLast>249</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Data Flow Analysis of Software Executed by Unreliable Hardware</title>
    <abstract language="eng">The data flow is a crucial part of software execution in recent applications. It depends on the concrete implementation of the realized algorithm and it influences the correctness of a result in case of hardware faults during the calculation. In logical circuits, like arithmetic operations in a processor system, arbitrary faults become a more tremendous aspect in future. With modern manufacturing processes, the probability of such faults will increase and the result of a software's data flow will be more vulnerable. This paper shows a principle evaluation method for the reliability of a software's data flow with arbitrary soft errors also with the concept of fault compensation. This evaluation is discussed by means of a simple example based on an addition.</abstract>
    <parentTitle language="eng">16th Euromicro Conference on Digital System Design, Los Alamitos, CA, USA</parentTitle>
    <identifier type="doi">10.1109/DSD.2013.35</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Peter Raab</author>
    <author>Stanislav Racek</author>
    <author>Stefan Krämer</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>data flow</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>error probability</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>fault compensation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>reliability analysis</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>software-implemented-hardwarefault-tolerance (SIHFT)</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1196</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1878</pageFirst>
    <pageLast>1885</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Fail-Safe and Fail-Operational Systems safeguarded with Coded Processing</title>
    <abstract language="eng">Safety has the highest priority because it helps contribute to customer confidence and thereby ensures further growth of the new markets, like electromobility. Therefore in series production redundant hardware concepts like dual core microcontrollers running in lock-step-mode are used to reach for example ASIL D safety requirements given from the ISO 26262. Coded processing is capable of reducing redundancy in hardware by adding diverse redundancy in software, e.g. by specific coding of data and instructions. A system with two coded processing channels is considered. Both channels are active. When one channel fails, the service can be continued with the other channel. It is imaginable that the two channels with implemented coded processing are running with time redundancy on a single core or on a multi core system where for example different ASIL levels are partitioned on different cores. In this paper a redundancy concept based on coded processing will be taken into account. The improvement of the Mean Time To Failure by safeguarding the system with coded processing will be computed for fail-safe as well as for fail-operational systems. The use of the coded processing approach in safeguarding failsafe systems is proved.</abstract>
    <parentTitle language="eng">2013 IEEE EUROCON - International Conference on Computer as a Tool,  Zagreb, Croatia, July 1-4, 2013</parentTitle>
    <identifier type="isbn">978-1-4673-2231-7</identifier>
    <identifier type="doi">10.1109/EUROCON.2013.6625234</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Braun</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>fail-safe</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>fail-operational</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>fault-tolerant</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>failure probability</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>coded processing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Safely Embedded Software</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>SES</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>safety measure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>ISO 26262</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>electromobility</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Mean Time To Failure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>MTTF</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>reliability</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>diversity</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1197</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>630</pageFirst>
    <pageLast>637</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Error Model and the Reliability of Arithmetic Operations</title>
    <abstract language="eng">Error detecting and correcting codes are widely used in data transmission, storage systems and also for data processing. In logical circuits like arithmetic operations, arbitrary faults can cause errors in the result. However in safety critical applications, it is important to avoid those errors which would lead to system failures. Several approaches are known to protect the result of operations during software processing. In the same way like transmission systems, coded processing uses codes for fault detection. But in contrast to transmission systems, there is no adequate channel model available which makes it possible to evaluate the residue error probability of an arithmetic operation in an analytical way. This paper tries to close the gap of arithmetic error models by the development of a model for an ordinary addition in a computer system. Thus, the reliability of an addition's result can be analytically evaluated.</abstract>
    <parentTitle language="eng">2013 IEEE EUROCON - International Conference on Computer as a Tool,  Zagreb, Croatia, July 1-4, 2013</parentTitle>
    <identifier type="doi">10.1109/EUROCON.2013.6625047</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Peter Raab</author>
    <author>Stefan Krämer</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>addition</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>channel model</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>coded processing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>fault simulation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Markov model</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>residue error probability</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1198</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Vogel Business Media</publisherName>
    <publisherPlace>Würzburg</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Synchronisationsverfahren in embedded Multicoresystemen</title>
    <parentTitle language="deu">Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezembern 2013, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Alfranseder</author>
    <author>Tobias Krapf</author>
    <author>Jürgen Mottok</author>
    <author>Christian Siemers</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1199</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>13</pageFirst>
    <pageLast>18</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>18</volume>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A modified synchronization model for dead-lock free concurrent execution of strongly interacting task sets in embedded systems</title>
    <abstract language="eng">Global scheduling algorithms are very promising for application in embedded real-time systems using multi-core controllers. In this paper we want to make a first step forward to apply such scheduling methods on real existing systems. Especially a new resource model is necessary to avoid deadlocks, as this goal can not be achieved by using the standard OSEK Priority Ceiling Protocol when shared global resources are in use. We also introduce the new metric mean Normalized Blocking Time in order to be able to compare locking mechanisms according to the timing effects of their blocking behavior. Finally we give a simulative application example of the new metric by the use of two different kinds of semaphore models and an example task set typical for existing embedded real-time systems in the automotive powertrain environment.</abstract>
    <parentTitle language="eng">2013 International Conference on Applied Electronics (AE 2013), IEEE, 10-12 September 2013, Pilsen, Czech Republic</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Alfranseder</author>
    <author>Matthias Mucha</author>
    <author>Stefan Schmidhuber</author>
    <author>Andreas Sailer</author>
    <author>Michael Niemetz</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Labor Datenkommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1200</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferencepresentation</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">How to improve the reactiveness and efficiency of embedded multicore systems by use of probabilistic simulation and optimization techniques: A case study</title>
    <parentTitle language="eng">Advanced Research Workshop: Improving Disaster Resilience and Mitigation - New Means and Tools, Trends, Iasi</parentTitle>
    <subTitle language="eng">Invited Poster Session</subTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Alfranseder</author>
    <author>Stefan Schmidhuber</author>
    <author>Matthias Mucha</author>
    <author>Andreas Sailer</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1201</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>workingpaper</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Developing the e-learning class ‘practical training in c’</title>
    <enrichment key="opus.source">publish</enrichment>
    <author>M. Pfaller</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1202</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-06</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Optimizing the task allocation step for multi-core processors within autosar</title>
    <abstract language="eng">We present a model-based optimization approach for the task allocation problem in embedded multi-core systems. The information therefore is obtained from a system description in AUTOSAR and runtime measurements of the runnables in hardware traces. Based on this an initial software partitioning of runnables to tasks is created. We then use a genetic algorithm to create and evaluate solutions to the task allocation problem. Each solution is hereby evaluated using a discrete event-based simulation, which allows the evaluation with regard to real-time properties, resource consumption and data-communication overhead. The significance of our approach is then shown in a case-study. There, we optimize the task allocation of an embedded system, whose complexity is comparable to that of an actual system, on a multi-core processor. Finally, the results of the optimization are transferred to an ECU Configuration Description to enable further development in compliance with the AUTOSAR methodology.</abstract>
    <parentTitle language="eng">2013 International Conference on Applied Electronics, IEEE, Pilsen, Czech Republic</parentTitle>
    <identifier type="url">https://ieeexplore.ieee.org/document/6636524</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Andreas Sailer</author>
    <author>Stefan Schmidhuber</author>
    <author>Michael Deubzer</author>
    <author>Martin Alfranseder</author>
    <author>Matthias Mucha</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AUTOSAR</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Multi-Objective Optimization</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Multi-Core</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Goodness-of-fit</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Task Allocation</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1077</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>601</pageFirst>
    <pageLast>610</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Konstruktivistische Didaktik - ein Rezept für eine bessere Software Engineering Ausbildung?</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Mottok</author>
    <author>Georg Hagel</author>
    <author>Matthias Utesch</author>
    <author>Franz Waldherr</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1078</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>487</pageFirst>
    <pageLast>497</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Memorandum der Bioagile Software- und Systementwicklung</title>
    <parentTitle language="deu">Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Peter Schmidt</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1057</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Safely embedded software and MISRA C++: 2008 – a safety framework for c++</title>
    <parentTitle language="eng">Proceedings of the SAFETY@SIEMENS Conference</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Mottok</author>
    <author>Frank Schiller</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1054</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">MISRA C++:2008 and safely embedded software – a safety framework for C++</title>
    <parentTitle language="eng">Proceedings of the Automotive Safety &amp; Security Conference</parentTitle>
    <identifier type="url">http://docplayer.org/53952332-Misra-c-2008-safely-embedded-software-ses.html</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Mottok</author>
    <author>Frank Schiller</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1047</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>436</pageFirst>
    <pageLast>443</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Modellbasierte Sicherheitsanalysen von Software-Architekturen</title>
    <parentTitle language="deu">Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Hobelsberger</author>
    <author>Jürgen Mottok</author>
    <author>Reiner Dumke</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1049</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>455</pageFirst>
    <pageLast>460</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">"Werkstattbericht" Bioagile Softwareentwicklung</title>
    <parentTitle language="deu">Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Peter Schmidt</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1048</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>444</pageFirst>
    <pageLast>449</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Safely embedded software- a safety framework for c++</title>
    <parentTitle language="eng">Proceedings of the 1st Embedded Software Engineering Conference, 8. bis 10. Dezember 2008, Sindelfingen</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1043</id>
    <completedYear/>
    <publishedYear>2007</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>283</pageFirst>
    <pageLast>288</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A concept for a safe realization of a state machine in embedded automotive applications</title>
    <abstract language="eng">Currently, both fail safe and fail operational architectures are based on hardware redundancy in automotive embedded systems. In contrast to this approach, safety is either a result of diverse software channels or of one channel of specifically coded software within the framework of Safely Embedded Software. Product costs are reduced and flexibility is increased. The overall concept is inspired by the well-known Vital Coded Processor approach. Since Mealy state machines are frequently used in embedded automotive systems, application software with a general Mealy state machine is realized differently with Safely Embedded Software starting from the high level programming language C with corresponding measurements.</abstract>
    <parentTitle language="eng">Computer safety, reliability, and security, 26th International Conference, SAFECOMP 2007, Nuremberg, Germany, September 18-21, 2007; proceedings</parentTitle>
    <identifier type="doi">10.1007/978-3-540-75101-4_2</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="OtherSeries">Lecture Notes in Computer Science ; 4680</enrichment>
    <author>Jürgen Mottok</author>
    <author>Frank Schiller</author>
    <author>Thomas Völkl</author>
    <author>Thomas Zeitler</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Safely</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Embedded Software</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Safe State Machine</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diverse Instructions</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Safety Code Weaving</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Safety Supervisor</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1042</id>
    <completedYear/>
    <publishedYear>2007</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>43</pageFirst>
    <pageLast>47</pageLast>
    <pageNumber/>
    <edition/>
    <issue>7-8</issue>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Architekturmodellierung: Vergleich von EAST ADL und SAE AADL</title>
    <parentTitle language="deu">Hanser Automotive</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Martin Hobelsberger</author>
    <author>Jürgen Mottok</author>
    <author>Stefan Kuntz</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1041</id>
    <completedYear/>
    <publishedYear>2006</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>52</pageFirst>
    <pageLast>54</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Generische Safety-Architektur für KFZ-Software</title>
    <parentTitle language="deu">Hanser automotive</parentTitle>
    <enrichment key="opus.source">publish</enrichment>
    <author>Frank Schiller</author>
    <author>Jürgen Mottok</author>
    <author>M. Blum</author>
    <author>F. Duckstein</author>
    <author>R. Egen</author>
    <author>M. Hummel</author>
    <author>T. Mattes</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1032</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferencepresentation</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Current and Future Efforts in Benchmarking NIST LWC Ciphers</title>
    <parentTitle language="eng">4th Lightweight Cryptography Workshop 2020 at NIST, Gaithersburg, USA</parentTitle>
    <identifier type="url">https://csrc.nist.gov/CSRC/media/Presentations/efforts-in-benchmarking-lwc-ciphers/images-media/session-4-renner-current-future-benchmarking.pdf</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Sebastian Renner</author>
    <author>Enrico Pozzobon</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1039</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>VDE-Verlag</publisherName>
    <publisherPlace>Berlin</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-04</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Parallel Programming in Real-Time Systems</title>
    <abstract language="eng">The enormous amounts of data modern real-time systems have to process lead to expensive, long-lasting calculations. In order to manage those computations in a timely manner, parallel task models have gained a lot of popularity lately. However, parallel programming can be very cumbersome and verbose. Other computationally intensive sectors have dealt with parallel computing for decades and have accumulated their experience in the development of parallel frameworks. Examples of well known parallel runtime systems are OpenMP, Intel Threading Building Blocks (TBB) and Microsoft Parallel Pattern Library (PPL). These runtime systems allow developers to enhance parallelism in their applications in a straightforward fashion. However, those parallel frameworks and the patternbased interfaces they provide might not be easily applicable in real-time systems. In this paper, we investigate the use of parallel programming frameworks in time-critical systems. On that account, we discuss considerations for the design of real-time applications that make use of such parallel runtime systems. Furthermore, we evaluate three library-based frameworks from different computing sectors, namely Intel Threading Building Blocks, Embedded Multicore Building Blocks (EMBB) and High Performance ParalleX (HPX), by conducting benchmarks of various parallel algorithms on an embedded multicore architecture.</abstract>
    <parentTitle language="eng">Architecture of computing systems - ARCS 2019, 32nd international conference, Copenhagen, Denmark, May 20-21, 2019, proceedings</parentTitle>
    <identifier type="url">https://ieeexplore.ieee.org/abstract/document/8836206</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">begutachtet</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Michael Schmid</author>
    <author>Florian Fritz</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1029</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>5</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Code reviews in C++: Preliminary results from an eye tracking study</title>
    <abstract language="eng">Code reviews are an essential part of quality assurance in modern software projects. But despite their great importance, they are still carried out in a way that relies on human skills and decisions. During the last decade, there have been several publications on code reviews using eye tracking as a method, but only a few studies have focused on the performance differences between experts and novices. To get a deeper understanding of these differences, the following experiment was developed: This study surveys expertise-related differences in experts’, advanced programmers’, and novices’ eye movements during the review of eight short C++ code examples, including correct and erroneous codes. A sample of 35 participants (21 novices, 14 advanced and expert programmers) were recruited. A Tobii Spectrum 600 was used for the data collection. Measures included participants’ eye movements during the code review, demographic background data, and cued retrospective verbal comments on replays of their own eye movement recordings. Preliminary results give proof for experience-related differences between participants. Advanced and expert programmers performed significantly better in case of error detection and the eye tracking data implies a more efficient reviewing strategy.</abstract>
    <parentTitle language="eng">ETRA '20 Short Papers: ACM Symposium on Eye Tracking Research and ApplicationsJune 2020</parentTitle>
    <identifier type="isbn">ISBN 9781450371346</identifier>
    <identifier type="doi">10.1145/3379156.3391980</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Florian Hauser</author>
    <author>Stefan Schreistetter</author>
    <author>Rebecca Reuter</author>
    <author>Jürgen Mottok</author>
    <author>Hans Gruber</author>
    <author>Kenneth Holmqvist</author>
    <author>Nick Schorr</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>858</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>153</pageFirst>
    <pageLast>157</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>VDE-Verlag</publisherName>
    <publisherPlace>Berlin</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2019-09-16</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A Measure of Confidence of Artificial Neural Network Classifiers</title>
    <abstract language="eng">Confidence in results of an Artificial Neural Networks (ANNs) is increased by preferring to reject data, that is not trustful, instead of risking a misclassification. For this purpose a model is proposed that is able to recognize data, which differs significantly from the training data, during inference. The proposed model observes all activations of the hidden layers, as well as input and output layers of an ANN in a grey-box view. To make ANNs more robust in safety critical applications, this model can be used to reject flawed data, that is suspected to decrease the accuracy of the model. If this information is logged during inference, it can be used to improve the model, by training it specifically with the missing information. An experiment on the MNIST dataset is conducted and its results are discussed.</abstract>
    <parentTitle language="eng">ARCS Workshop 2019; 32nd International Conference on Architecture of Computing Systems,  20-21 May 2019, Copenhagen, Denmark</parentTitle>
    <identifier type="url">https://ieeexplore.ieee.org/document/8836211</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <author>Andreas Gschossmann</author>
    <author>Simon Jobst</author>
    <author>Jürgen Mottok</author>
    <author>Rudolf Bierl</author>
    <collection role="ddc" number="006">Spezielle Computerverfahren</collection>
    <collection role="institutes" number="FakANK">Fakultät Angewandte Natur- und Kulturwissenschaften</collection>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="persons" number="bierlsappz">Bierl, Rudolf (Prof. Dr.) - Sensorik-ApplikationsZentrum</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Sensorik-Applikationszentrum (SappZ)</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1028</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>42</pageFirst>
    <pageLast>46</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Deliberate Practice in Programming: How is it carried out by programmers?</title>
    <abstract language="eng">This work in progress study examines through which activities programmers perform deliberate practice to improve their own skills in coding and programming. For this reason, a qualitative questionnaire was developed and conducted with a sample of 22 participants. The results indicate that programmers perform formal and informal forms of training and learning. Typically, a classical programming training in the context of a university course or for work-related reasons is a first step in the acquisition of expertise. Building on these basic skills, non-formal and informal learning activities are carried out by the learners. Especially the social interaction and the collaborative work with other programmers is of great importance in this context. The activities mentioned by the test persons fulfil the characteristics of deliberate practice and will be examined more closely in a further study.</abstract>
    <parentTitle language="eng">ECSEE '20: Proceedings of the 4th European Conference on Software Engineering Education, Seeon, Germany, June 2020</parentTitle>
    <identifier type="isbn">ISBN 9781450377522</identifier>
    <identifier type="doi">10.1145/3396802.3396815</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <author>Florian Hauser</author>
    <author>Theresa Stark</author>
    <author>Jürgen Mottok</author>
    <author>Hans Gruber</author>
    <author>Rebecca Reuter</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1022</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Tutorial on Software Engineering Education in Co-Located Multi-User Eye-Tracking-Environments</title>
    <abstract language="eng">We briefly describe a tutorial on the application of Eye-Tracking technology for Software Engineering Education. We will showcase our setup of a large-scale Eye-Tracking-Classroom and its usage for real-time improvement of traditional learning scenarios in Software Engineering Education. We will focus on the integration of gaze data into modern integrated development environments (IDEs) and demonstrate a complete workflow for its usage in co-located multi-user Eye-Tracking-Environments.</abstract>
    <parentTitle language="eng">Proceedings of the 32nd IEEE Conference on Software Engineering Education and Training: Munich, November 2020</parentTitle>
    <identifier type="doi">10.1109/CSEET49119.2020.9206170</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Hans Gruber</author>
    <author>Christian Wolff</author>
    <author>Jürgen Mottok</author>
    <author>Alexander Bazo</author>
    <author>Florian Hauser</author>
    <author>Stefan Schreistetter</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>eye-tracking</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>software engineering education</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>multi-user eye tracking</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>real-time learning scenarios</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1016</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>592</pageFirst>
    <pageLast>600</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Insights in Students’ Problems during UML Modeling</title>
    <abstract language="eng">UML (Unified Modeling Language) is the current de facto as well as de jure standard (ISO/IEC 19505:2012) notation to visualize models in software development. UML provides essential guidelines and rules to visualize and understand complex software systems. This is the reason why it has become part of curricula for software engineering courses at many universities worldwide. It is well known, however, that UML is hard to grasp for novices, mainly due to its complexity. In order to tackle the problem of teaching UML to novice students appropriately, it is inevitable to understand their needs and problems much better than we do now. This paper presents empirical insights into students' problems when developing common UML diagrams. Identified problems are generalized, giving rise to a problem catalogue that is derived from our empirical findings, thus establishing a basis for addressing these problems through focused learning arrangements.</abstract>
    <parentTitle language="eng">2020 IEEE Global Engineering Education Conference (EDUCON): Proceedings</parentTitle>
    <identifier type="doi">10.1109/EDUCON45650.2020.9125110</identifier>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Rebecca Reuter</author>
    <author>Theresa Stark</author>
    <author>Yvonne Sedelmaier</author>
    <author>Dieter Landes</author>
    <author>Jürgen Mottok</author>
    <author>Christian Wolff</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>UML</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>UML problems</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>software engineering</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>higher education</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>visual notation</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1009</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>495</pageFirst>
    <pageLast>509</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Springer</publisherName>
    <publisherPlace>Cham</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">A Hardware in the Loop Benchmark Suite to Evaluate NIST LWC Ciphers on Microcontrollers</title>
    <abstract language="eng">The National Institute of Standards and Technology (NIST) started the standardization process for lightweight cryptography algorithms in 2018. By the end of the first round, 32 submissions have been selected as 2nd round candidates. NIST allowed designers of 2nd round submissions to provide small updates on both their specifications and implementation packages. In this work, we introduce a benchmarking framework for evaluating the performance of NIST Lightweight Cryptography (LWC) candidates on embedded platforms. We show the features and application of the framework and explain its design rationale. Moreover, we provide information on how we aim to present up-to-date performance figures throughout the NIST LWC competition. In this paper, we present an excerpt of our software benchmarking results regarding speed and memory requirements of selected ciphers. All up-to-date results, including benchmarking different test cases for multiple variants of each 2nd round algorithm on five different microcontrollers, are periodically published to a public website. While initially only the reference implementations were available, the ability of automatically testing the performance of the candidate algorithms on multiple platforms becomes especially relevant as more optimized implementations are developed. Finally, we show how the framework can be extended in different directions: support for more target platforms can be easily added, different kinds of algorithms can be tested, and other test metrics can be acquired. The focus of this paper should rather lay on the framework design and testing methodology than on the current results, especially for reference code.</abstract>
    <parentTitle language="eng">Information and Communications Security: 22nd International Conference, ICICS 2020, Copenhagen, Denmark, August 24-26, 2020, Proceedings</parentTitle>
    <identifier type="doi">10.1007/978-3-030-61078-4_28</identifier>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <enrichment key="AmountAPC">Lecture Notes in Computer Science ; 12282</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Sebastian Renner</author>
    <author>Enrico Pozzobon</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Lightweight cryptography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Benchmarking</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Embedded systems</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>RISC-V</value>
    </subject>
    <collection role="ddc" number="005">Computerprogrammierung, Programme, Daten</collection>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1008</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>200</pageFirst>
    <pageLast>212</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Equally Distributed Bus-Communication Access Rights for Inter MCU Communication Using Multimaster SPI</title>
    <abstract language="eng">With the rising complexity and processing power of modern computer systems, the amount of MCU on a single PCB also rises. These microcontrollers often need to communicate with each other to exchange payload and control information in a bidirectional manner. Today’s well-established communication protocols in MCUs either do not fit modern transmission speed requirements or do have an inappropriate master-slave attribute, which does not allow the communication partners to have equal bus access rights. Therefore, this paper introduces an extension of the Serial Peripheral Interface (SPI) to allow an equally distributed access right for the communication interface between two microcontrollers. It simultaneously does fit modern transmission speed requirements of a common network interface, so that the message transmission does not constitute a bottleneck in data processing. Besides the protocol design, we do also provide a first prototype implementation, which constitutes a proof of concept.</abstract>
    <parentTitle language="eng">Architecture of Computing Systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings</parentTitle>
    <parentTitle language="deu">Lecture notes in computer science ; Bd. 12155</parentTitle>
    <identifier type="doi">10.1007/978-3-030-52794-5_15</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Manuel Dentgen</author>
    <author>Sebastian Renner</author>
    <author>Jürgen Mottok</author>
    <collection role="ddc" number="005">Computerprogrammierung, Programme, Daten</collection>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1007</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>12</pageFirst>
    <pageLast>21</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Totally Different and yet so Alike: Three Concepts to Use Scrum in Higher Education</title>
    <abstract language="eng">Software process models are important in software projects in order to give the work of a project guidelines or a framework. However, teaching process models in higher education seems to be quite challenging. This has to do with the fact that undergraduates have no experience with projects in which process models are used. The theoretical mediation of process models is initially on a very abstract level. For this reason, we chose to combine two didactic approaches, namely problem-based learning and project work.&#13;
&#13;
Various traditional plan-driven process models have been expanded in courses in Software Engineering with agile process models. The Scrum Framework is the focus of consideration of this paper.&#13;
&#13;
Three Universities of Applied Sciences which cooperate in the EVELIN project focused on Scrum as a process model and integrated it into their teaching. Since the respective concepts of implementation differ, they should be presented and compared in this article to presents some practice approaches.&#13;
&#13;
The goal of this presentation of is a uniform evaluation in order to obtain insights from different perspectives. This comparison can draw conclusions for possible necessary improvements of the respective concepts.</abstract>
    <parentTitle language="eng">Proceedings of the 4th European Conference on Software Engineering Education (ECSEE '20): June 2020, Seeon/Bavaria, Germany</parentTitle>
    <identifier type="doi">10.1145/3396802.3396817</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Marco Klopp</author>
    <author>Carolin Gold-Veerkamp</author>
    <author>Jörg Abke</author>
    <author>Kai Borgeest</author>
    <author>Rebecca Reuter</author>
    <author>Sabrina Jahn</author>
    <author>Jürgen Mottok</author>
    <author>Yvonne Sedelmaier</author>
    <author>Alexander Lehmann</author>
    <author>Dieter Landes</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16314">Lebenswissenschaften und Ethik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1006</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1684</pageFirst>
    <pageLast>1685</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Learning from Escape Rooms? A Study Design Concept Measuring the Effect of a Cryptography Educational Escape Room</title>
    <abstract language="eng">Experts predict that more IT-Security specialists will be needed in the coming years, but in current higher education in engineering disciplines, this topic is hardly addressed. Newer learning methods such as game-based learning (GBL) are enjoying an increasing popularity as their improvement in the education of subject specific topics can be proven by a variety of studies. We chose Educational Escape Rooms (EduER) as a GBL-tool to impart IT-Security in higher education of engineers. In our Escape Room (ER), the students try to solve puzzles and riddles with learned knowledge on the emphasis of cryptography. This paper first deals with a brief introduction to GBL and EduERs, followed by the design of our ER concept, containing different tasks with focus on the topic of cryptography. The tasks cover different cryptographic methods and hash algorithms, e.g. AES, RSA, SHA3. Afterwards the experimental study is presented. The study of the EduER was carried out with students from the bachelor's program in Electrical Engineering and Information Technology at the OTH Regensburg. The participants were divided into three groups of 5 to 8 persons each. They received a briefing with important information, followed by the ER execution, a debriefing afterwards and an exam-like evaluation sheet to test their learned knowledge. Finally, first basic results are presented.</abstract>
    <parentTitle language="eng">2020 IEEE Global Engineering Education Conference (EDUCON): 27-30 April 2020, Porto, Portugal</parentTitle>
    <identifier type="doi">10.1109/EDUCON45650.2020.9125333</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Stefan Seebauer</author>
    <author>Sabrina Jahn</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16314">Lebenswissenschaften und Ethik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1005</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1713</pageFirst>
    <pageLast>1717</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Work in Progress: Towards an Academic Secure Software Engineering Curriculum for Engineers</title>
    <abstract language="eng">In the age of the Internet of Things, it is becoming increasingly important to integrate knowledge about the development of secure systems (Secure Software Engineering) into academic teaching. However, teaching IT Security and Secure Software Engineering to non-computer scientists is rare. Therefore, we focus our research on the integration of IT Security into software engineering education of non-computer scientists, particularly electrical engineers, by means of inductive teaching- and learning-arrangements. After collecting students' preconceptions of IT Security and Secure Software Engineering in prior work, this paper now contributes with a first mapping of these preconceptions with corresponding learning content as well as suitable inductive teaching methods to be able to create new lecture and exercise units and improve academic learning and teaching in both areas.</abstract>
    <parentTitle language="eng">2020 IEEE Global Engineering Education Conference (EDUCON): 27-30 April 2020, Porto, Portugal</parentTitle>
    <identifier type="doi">10.1109/EDUCON45650.2020.9125210</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Sabrina Jahn</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16314">Lebenswissenschaften und Ethik</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1004</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>185</pageFirst>
    <pageLast>199</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Springer International Publishing</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Security Improvements by Separating the Cryptographic Protocol from the Network Stack onto a Multi-MCU Architecture</title>
    <abstract language="eng">The number of IoT devices in SCADA and ICS systems is rising quickly, especially in the domain of critical infrastructures. But these kinds of systems are performing mission critical tasks like controlling devices in industrial facilities or substations in the smart grid. Therefore, they are subject to a lot of regulatory standards. Yet, to provide remote access over the internet, special architectures are developed to integrate a network interface into these devices without inferring with the actual functionality. However, these architectures either lack security measures against cyber-attacks or do not offer the necessary performance for time-critical communication interfaces. To solve that, an architecture consisting of three units is introduced in this paper to provide a network interface with extensive security measures and a high performance. The main feature is the isolation of the cryptographic functionality onto an additional MCU. After proposing the basic concept, the paper presents many implementation details. Based on the current state of implementation, a concept validation of the realized architecture is described.</abstract>
    <parentTitle language="eng">Architecture of Computing Systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings</parentTitle>
    <identifier type="doi">10.1007/978-3-030-52794-5_14</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">begutachtet</enrichment>
    <author>Tobias Frauenschläger</author>
    <author>Sebastian Renner</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Cyber-security</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Functional safety</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Network security</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Industrial Internet of Things</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Industrial Control System</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Supervisory Control and Data Acquisition System Multi microcontroller setup Dos prevention Critical infrastructures</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Multi microcontroller setup Dos prevention Critical infrastructures</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Dos prevention</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Critical infrastructures</value>
    </subject>
    <collection role="ddc" number="005">Computerprogrammierung, Programme, Daten</collection>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1003</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>29</pageFirst>
    <pageLast>38</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace>Landshut</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Systemarchitektur eines Sicherheitsmoduls im Energiesektor</title>
    <abstract language="deu">Aufgrund der immer weiter anwachsenden Vernetzung der Stromnetze wird die Kommunikation zwischen der Leitstelle des Energieversorgers und den Infrastrukturkomponenten innerhalb eines Umspannwerks immer bedeutsamer. Dabei werden sowohl Steuerbefehle als auch Daten für Überwachungsfunktionen übertragen. In den aktuellen Netzwerkarchitekturen findet diese Kommunikation ohne eine kryptografische Absicherung statt, was einen Angriffspunkt für gezielte Attacken und damit eine potenzielle Gefährdung der Energieversorgung darstellt. Um solchen Angriffen in Zukunft entgegenzuwirken, wird das ES³M-Sicherheitsmodul entwickelt. Dieses soll in das Netzwerk zwischen den beiden Kommunikationspartnern eingesetzt werden und so den Datenverkehr absichern. Mithilfe einer Bedrohungsanalyse wurden Anforderungen abgeleitet, die neben kryptografischen Maßnahmen auch Themen wie funktionale Sicherheit und Langlebigkeit umfassen. Um diese zu erfüllen, wurde eine spezielle Systemarchitektur auf Basis einer Aufgabenteilung entworfen. Diese Architektur und korrespondierende Designentscheidungen werden präsentiert.</abstract>
    <parentTitle language="deu">Tagungsband 2. Symposium Elektronik und Systemintegration ESI 2020: "Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung"</parentTitle>
    <identifier type="urn">urn:nbn:de:bvb:860-opus4-2092</identifier>
    <note>Die Konferenzveröffentlichung erschien im Band "Fachbeiträge 2. Symposium Elektronik und Systemintegration ESI 2020" mit dem Titel „Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung“. Die Fachtagung, geplant für den 01. April 2020 an der Hochschule Landshut, wurde aufgrund der Corona-Pandemie abgesagt, die eingereichten Fachbeiträge im Band veröffentlicht. Hrsg.: Artem Ivanov, Marc Bicker und Peter Patzelt. Hochschule Landshut, 2020, ISBN 978-3-9818439-4-1</note>
    <enrichment key="opus.source">publish</enrichment>
    <author>Tobias Frauenschläger</author>
    <author>Manuel Dentgen</author>
    <author>Jürgen Mottok</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16312">Energie und Mobilität</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1013</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>25</pageFirst>
    <pageLast>31</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Secure Software Update of a Secure Module in the Power Grid</title>
    <parentTitle language="eng">Proceedings of the Regensburg Applied Research Conference 2020 (RARC 2020), July 31st</parentTitle>
    <identifier type="url">https://doi.org/10.35096/othr/pub-641</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <licence>Creative Commons - CC BY-NC-ND - Namensnennung - Nicht kommerziell - Keine Bearbeitungen 4.0 International</licence>
    <author>Tom Inderwies</author>
    <author>Jürgen Mottok</author>
    <collection role="ddc" number="005">Computerprogrammierung, Programme, Daten</collection>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1001</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>8</pageLast>
    <pageNumber/>
    <edition/>
    <issue>7</issue>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace>Feldkirchen</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Transport Layer Scanning for Attack Surface Detection in Vehicular Networks</title>
    <abstract language="deu">In the beginning of every security analysis or penetration test of a system, information about the target has to be gathered. On IT-Systems a port scan is usually performed as a first step of an investigation. Since the communication protocols differ in automotive systems, generic port scanning tools can’t be used for a security analysis of CANs.&#13;
More complex protocols have a higher likelihood of implementation errors and bugs. On CAN networks, such payloads are transferred through International Standard Transport Protocol (ISO-TP) communication. We designed a new methodology to identify ISO-TP endpoints in automotive networks. Every of these endpoints can provide exploitable application layer protocols and therefor has to be considered during penetration testing and security analysis.&#13;
&#13;
We contribute a new scan approach for the automated evaluation of possible attack surfaces in automotive CAN networks which has a higher coverage and multiple advantages than state of the art approaches.</abstract>
    <parentTitle language="eng">CSCS '20: Computer Science in Cars Symposium</parentTitle>
    <identifier type="doi">10.1145/3385958.3430476</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <author>Nils Weiss</author>
    <author>Sebastian Renner</author>
    <author>Jürgen Mottok</author>
    <author>Václav Matoušek</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>automotive networks</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>network scan</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>attack surface detection</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>automation</value>
    </subject>
    <collection role="ddc" number="005">Computerprogrammierung, Programme, Daten</collection>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16311">Digitalisierung</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>1000</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>241</pageFirst>
    <pageLast>255</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2021-02-03</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Accelerating Real-Time Applications with Predictable Work-Stealing</title>
    <abstract language="eng">Modern compute architectures often consist of multiple CPU cores to achieve their performance, as physical properties put a limit on the execution speed of a single processor. This trend is also visible in the embedded and real-time domain, where programmers are forced to parallelize their software to keep deadlines. Additionally, embedded systems rely increasingly on modular applications, that can easily be adapted to different system loads and hardware configurations.&#13;
&#13;
To parallelize applications under these dynamic conditions, often dispatching frameworks like Threading Building Blocks (TBB) are used in the desktop and server segment. More recently, Embedded Multicore Building Blocks (EMB2) was developed as a task-based programming solution designed with the constraints of embedded systems in mind.&#13;
&#13;
In this paper, we discuss how task-based programming fits such systems by analyzing scheduler implementation variants, with a focus on classic work-stealing and the libraries TBB and EMB2. Based on the state of the art we introduce a novel resource-trading concept that allows static memory allocation in a work-stealing runtime holding strict space and time bounds. We conduct benchmarks between an early prototype of the concept, TBB and EMB2, showing that resource-trading does not introduce additional runtime overheads, while unfortunately also not improving on execution time variances.</abstract>
    <parentTitle language="eng">Architecture of computing systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings</parentTitle>
    <identifier type="doi">10.1007/978-3-030-52794-5_18</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="BegutachtungStatus">begutachtet</enrichment>
    <author>Florian Fritz</author>
    <author>Michael Schmid</author>
    <author>Jürgen Mottok</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Real-time</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Parallel programming</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Work-stealing</value>
    </subject>
    <collection role="ddc" number="005">Computerprogrammierung, Programme, Daten</collection>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>659</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>115</pageNumber>
    <edition/>
    <issue/>
    <volume/>
    <type>masterthesis</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>2020-10-19</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Entwicklung eines Regelverfahrens für einen optimierten und zentralen Blindleistungsabruf zur Beeinflussung des Blindleistungshaushalts von Mittelspannungsnetzen unter Einhaltung von Netzrestriktionen</title>
    <abstract language="deu">Die Energiewende führt zu neuen Herausforderungen für Verteilungsnetzbetreiber hinsichtlich der Er-bringung von Systemdienstleistungen, der Integration weiterer Erzeugungsanlagen und Lasten sowie der Gewährleistung einer hohen Versorgungssicherheit und normgerechten Spannungsqualität. Die De-ckung der auftretenden Blindleistungsbedarfe seitens der Netzbetriebsmittel, Verbraucher und Erzeu-gungsanlagen gewinnt durch den Wegfall der Großkraftwerke für Netzbetreiber zunehmend an Bedeu-tung. Das Projekt SyNErgie beschäftigt sich diesbezüglich mit der Entwicklung neuartiger Blindleis-tungsmanagementsysteme für Mittelspannungsnetze. Ziel ist es, das bisher ungenutzte, freie Blindleis-tungspotential betrieblicher Kompensationsanlagen und dezentraler Erzeugungsanlagen (allgemein: Blindleistungsquellen) zu nutzen, um die Blindleistungsänderungsfähigkeit eines Verteilungsnetzes zu erhöhen. Diese Arbeit beschäftigt sich mit der Entwicklung eines zentralen Blindleistungsregelsystems, bei dem Blindleistungsquellen auf Basis von „Optimal Power Flow“-Berechnungen über eine zentrale Recheninstanz angesteuert werden. Zum Einsatz kommt dabei ein Optimierungsalgorithmus, der auf Basis des aktuellen Netzzustandes (Spannungs- und Auslastungsreserven) und des aktuellen Blindleis-tungspotentials der Blindleistungsquellen einen bedarfsoptimalen Abruf koordiniert. Das zentrale Re-gelverfahren wird in Netzmodellen verschiedenartiger Mittelspannungsnetzgruppen und unterschiedli-cher Art und Anzahl von Blindleistungsquellen angewendet sowie im Hinblick auf variierende Zielvor-gaben und Randbedingungen evaluiert und diskutiert.</abstract>
    <identifier type="urn">urn:nbn:de:bvb:898-opus4-6595</identifier>
    <identifier type="doi">10.35096/othr/pub-659</identifier>
    <licence>Creative Commons - CC BY-NC-ND - Namensnennung - Nicht kommerziell - Keine Bearbeitungen 4.0 International</licence>
    <author>Johannes Rauch</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Netzbetriebsführung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Blindleistungsmanagement</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Optimierung</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16312">Energie und Mobilität</collection>
    <collection role="persons" number="bruecklfenes">Brückl, Oliver (Prof. Dr.) - FENES / Forschungsgruppe Energienetze</collection>
    <thesisPublisher>Ostbayerische Technische Hochschule Regensburg</thesisPublisher>
    <thesisGrantor>Ostbayerische Technische Hochschule Regensburg</thesisGrantor>
    <file>https://opus4.kobv.de/opus4-oth-regensburg/files/659/MA_Rauch_Johannes.pdf</file>
  </doc>
  <doc>
    <id>641</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>184</pageNumber>
    <edition/>
    <issue/>
    <volume/>
    <type>conferencevolume</type>
    <publisherName/>
    <publisherPlace>Regensburg</publisherPlace>
    <creatingCorporation>RARC &lt;2020, Regensburg&gt;</creatingCorporation>
    <contributingCorporation>organized by Ostbayerische Technische Hochschule Regensburg</contributingCorporation>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>2020-08-27</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Regensburger Applied Research Conference 2020 (RARC 2020), July 31st</title>
    <abstract language="eng">The Applied Research Conference which is held every year at another  University of Applied Sciences in Bavaria is the main event for all  students in the Master of Applied Research program. They come together to present their work in oral presentations and full papers, which  are published in the proceedings, as well as poster presentations of  the students after their 1st semester. For sure it is interesting for  Professors and interested people to see the results of upcoming scientists and researchers. Due to the Corona pandemic, this year it  is not possible to organize the conference as usual in presence. We have to refrain from face-to-face discussions, having together a cup of coffee. We as Professors at the OTH Regensburg wanted to give our students the chance to finish this semester successfully – despite  all limitations due to the pandemic situation. Therefore we decided  to organize the RARC 2020 – Regensburg Applied  Research Conference  2020 – for the Master of Applied Research students of OTH Regensburg as an online conference. However, for a Technical University the situation is rather a challenge than a problem. Using a variety of  online tools for teaching during this semester, we have enough experience to find a setup for RARC2020. We received 28 submissions for full papers, which were peer reviewed and 26 of them were accepted – you will find them in this proceedings, and they will be presented  orally on July 31st, 2020. Additionally, there are 22 posters which will be presented on the same day. During the Plenary Opening Session, after a welcome by our President Prof. Dr. Wolfgang Baier we will have 3 Keynote speakers:&#13;
Prof. Dr. phil. habil. Karsten Weber: Erkenntnistheorie für Ingenieure&#13;
Prof. em. Georg Scharfenberg: 11 Years Master of Applied Research Alumnis&#13;
Veronika Fetzer: Entrepreneurship</abstract>
    <subTitle language="eng">Proceedings</subTitle>
    <identifier type="doi">10.35096/othr/pub-641</identifier>
    <identifier type="urn">urn:nbn:de:bvb:898-opus4-6417</identifier>
    <licence>Creative Commons - CC BY-NC-ND - Namensnennung - Nicht kommerziell - Keine Bearbeitungen 4.0 International</licence>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Applied Research</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othpublikationsherkunft" number="">Von der OTH Regensburg herausgegeben</collection>
    <collection role="oaweg" number="">Gold Open Access- Erstveröffentlichung in einem/als Open-Access-Medium</collection>
    <collection role="othforschungsschwerpunkt" number="16316">Produktion und Systeme</collection>
    <thesisPublisher>Ostbayerische Technische Hochschule Regensburg</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-oth-regensburg/files/641/RARC 2020 Proceedings.pdf</file>
  </doc>
  <doc>
    <id>573</id>
    <completedYear/>
    <publishedYear>2013</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>IEEE</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Let the students publish</title>
    <abstract language="eng">In technical study programs on the bachelor level the focus is mainly directed on the scientific education in theory and practice. Publication is usually started during the PhD phase when students write their first scientific papers. During the last years some very successful projects were made at the university of applied sciences Regensburg to motivate bachelor students doing their first own small publications. The results of these projects are presented in this paper and ideas how students can publish are given.</abstract>
    <parentTitle language="deu">IEEE International Conference on Teaching, Assessment and Learning for Engineering (TALE), 26-29 August 2013, Bali Dynasty Resort, Kuta, Indonesia</parentTitle>
    <identifier type="doi">10.1109/TALE.2013.6654515</identifier>
    <identifier type="isbn">978-1-4673-6355-6</identifier>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">false</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Thomas Fuhrmann</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Education</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Engineering education</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Educational technology</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Student project</value>
    </subject>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16314">Lebenswissenschaften und Ethik</collection>
    <collection role="institutes" number="">Labor Optische Übertragungssysteme</collection>
  </doc>
  <doc>
    <id>547</id>
    <completedYear/>
    <publishedYear>2019</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferencesummary</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Reverse Engineering and Weaponizing OBD Dongles</title>
    <parentTitle language="deu">Automotive Security Research Group, Stuttgart, Germany 2019, Meeting 22</parentTitle>
    <identifier type="url">https://www.meetup.com/de-DE/Automotive-Security-Research-Group-ASRG/events/261796924/</identifier>
    <author>Nils Weiss</author>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="othforschungsschwerpunkt" number="16315">Information und Kommunikation</collection>
    <collection role="institutes" number="">Laboratory for Safe and Secure Systems (LAS3)</collection>
  </doc>
  <doc>
    <id>58</id>
    <completedYear/>
    <publishedYear>2018</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>33</pageFirst>
    <pageLast>38</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Internationalization of a Computer Science Faculty</title>
    <abstract language="eng">The paper at hand describes how a regional university of applied sciences tried to internationalize its learning and teaching environment. It describes the challenges encountered, the managerial approach taken, illustrates the implemented initiatives, and how effective they turned out. The results might be relevant to faculty staff in managerial positions at regional universities all over the world that face the challenge to internationalize their teaching and learning environment for the benefit of their domestic students.</abstract>
    <parentTitle language="eng">9th Annual International Conference on Computer Science Education: Innovation and Technology (CSEIT 2018), 2018, Singapore</parentTitle>
    <subTitle language="eng">Lessons learned from a regional german technical university of applied sciences</subTitle>
    <identifier type="doi">10.5176/2251-2195_CSEIT18.118</identifier>
    <enrichment key="BegutachtungStatus">peer-reviewed</enrichment>
    <licence>Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG</licence>
    <author>Markus Westner</author>
    <author>Thomas Fuhrmann</author>
    <author>Thomas Waas</author>
    <author>David Skelton</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Internationalization</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Faculty development</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Change management</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PDCA</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>swd</type>
      <value>Internationalisierung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>swd</type>
      <value>Hochschule für angewandte Wissenschaften</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>swd</type>
      <value>Lernumwelt</value>
    </subject>
    <collection role="ddc" number="0">Informatik, Informationswissenschaft, allgemeine Werke</collection>
    <collection role="institutes" number="FakEI">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="institutes" number="FakIM">Fakultät Informatik und Mathematik</collection>
    <collection role="othforschungsschwerpunkt" number="16314">Lebenswissenschaften und Ethik</collection>
    <collection role="institutes" number="">Labor Optische Übertragungssysteme</collection>
    <collection role="institutes" number="">IT-Anwenderzentrum</collection>
    <collection role="institutes" number="">FuE-Anwenderzentrum Informations- und Kommunikationstechnologien (IKT)</collection>
    <collection role="institutes" number="">Labor Regensburg Strategic IT Management (ReSITM)</collection>
  </doc>
</export-example>
